Search Results

Search found 21717 results on 869 pages for 'setup versions'.

Page 492/869 | < Previous Page | 488 489 490 491 492 493 494 495 496 497 498 499  | Next Page >

• How do internal smtp servers send mail to internal mail servers on the network?

  - by dmr83457

  We have upgraded our internal corporate email server and the IP address has changed internal to our network. A second email server is used for sending bulk jobs for a mailing list service that we offer. Since the switch of the internal corporate server IP we have been seeing problems when the bulk email server is trying to send email to our own domain. The log shows that it is still trying to hit the old corporate server instead of the new one. I have looked through all settings for the bulk email software and see nothing set there to send to internal mail servers, and I do not recall doing anything special to get this working when setup a couple years ago. Is there a setting in Win2003 or on the network that enables the mapping of MX record external IPs to internal IPs so mail gets routed correctly?

  Read the article

• bash code in rc.local not excuting after bootup

  - by mrTomahawk

  Does anyone know why a system would not execute the script code within rc.local on bootup? I have a post configuration bash script that I want to run after the initial install of VMware ESX (Red Hat), and for some reason it doesn't seem to execute. I have the setup to log its start of execution and even its progress so that I can see how far it gets in case it fails at some point, but even when I look at that log, I am finding that didn't even started the execution of the script code. I already checked to see that script has execution permissions (755), what else should I be looking at? Here is the first few lines of my code: #!/bin/sh echo >> /tmp/configLog "" echo >> /tmp/configLog "Entering maintenance mode"

  Read the article

• Visual Studio Agents 2012 on Server 2003 SP2

  - by Corith Malin

  I'm attempting to build out our Lab Manager with TFS 2012. On a virtual machine running Server 2003 SP2 32bit, I'm attempting to install the Visual Studio Agents 2012 and am running into an error: Setup Failed! Install cannot continue because some required components failed. Microsoft .NET Framework 4.5 Asia Looking into it, the install log is erroring when it's attempting to install dotNetFx45_Full_x86_x64.exe component. Looking at that install log, it is failing with: The .NET Framework 4.5 is not supported on this operating system. So, I see according to the Agents 2012 MSDN documentation, that Server 2003 SP2 is supported by Agents 2012. But I also see that according to the .NET 4.5 MSDN documentation, Server 2003 isn't supported. So how do I install Agents 2012 on 2003 SP2 as the documentation implies I can?

  Read the article

• External USB Fingerprint Reader for Pre-boot Authentication for Dell Laptop

  - by cop1152

  My company just purchased several Dell Latitude E6500 laptops with docking stations and external monitors. These laptops have a fingerprint scanner located next to the keyboard. DOCKED users who prefer to use the included fingerprint scanner for pre-boot authentication are forced to open their laptop in order to access the scanner. This is an inconvenience when the laptop is docked. We are looking for an external, usb fingerprint scanner, that will work with the current preboot authentication setup. I assume that this scanner would have to access the existing credentials for authentication....wherever they are stored. So we would require something that would work PRE-BOOT, use the existing credentials, and not interfere with usage when the machine was not docked, such as when the laptop is being used at home. Does anyone have experience with this scenario? Thanks.

  Read the article

• SNMPD - passing values in a trap

  - by ethrbunny

  Im trying to create an SNMP setup to monitor 500-1K machines. Each will be joined to the SNMPTRAPD server via a VPN. When the client system sends its messages, it's sending its internal address instead of the VPN address even though the 'trapsync' command is using the VPN. This will be a problem as many of these system will have DHCP addresses based on location so there will be overlap. What I'd like to figure out is how to pass extra values with the trap so I can identify which system a given trap comes from.

  Read the article

• Does Dynamic DNS require separate subdomains?

  - by kce

  Hello. I have a functioning DHCP/DNS (ISC Bind 9.6, DHCP 3.1.1) server running on Debian that I would like to add DynamicDNS functionality to. I have a pretty simple question: Does DynamicDNS require (or recommend) separate sub-domains? I have seen a few tutorials where the the clients that are acquiring their IP addresses and other networking information via DHCP are on a different sub-domain as the servers which are statically configured (both in terms of IP, and DNS). For example: All the clients are on ws.example.org and the servers on example.org. Right now all of our servers and clients are in the same domain (example.org) but spread across different zone files (because we have multiple subnets). The clients are configured with DHCP and the servers are configured statically. If I want to setup DynamicDNS for the clients should I use a separate sub-domain? What's the best practice here (and why or why not would it be a bad idea to do otherwise)? Thanks.

  Read the article

• Is there a convenient way to manually copy the Log Shipping *.trn files from one SQL 2008 server to

  - by Rick

  We have a remote SQL 2008 server (ServerB) that needs to keep a warm (15 minute interval is OK) copy of production data (ServerA). ServerA is also SQL 2008. Log Shipping looks like it will do the job. We can only get to the destination ServerB with remote desktop. Is there a way to set this up when we can't get to both servers from one Management Studio? We want to be able to temporarily (until a VPN is setup between our network and the ServerB network) manually export a small .trn file, copy it via remote desktop to ServerB and then manually import those transactions from the .trn file. My supervisor says he saw a post saying this is possible. We were just trying to avoid doing a full database backup and copying that every time. Thanks in advance for any suggestions on this.

  Read the article

• Setting up MySQL database replication [without restarting mysql]

  - by FunkyChicken

  I'm trying to setup MySQL db replication, it seems pretty straight forward. I was using this tutorial: http://www.howtoforge.com/mysql_database_replication Now I run a rather large MySQL database for a very large website, and in this tutorial it asks me to restart MySQL to apply the new settings in the /etc/my.cnf file. I'm try to avoid that step at all costs, as I know that restarting MySQL can take a few minutes on my machine (due to large logs/dbs), and I don't want any downtime. Is there a way to apply the necessary settings WITHOUT fully restarting Mysql?

  Read the article

• Office 2011 Mac, Sync calendars with google apps and iPhone

  - by Vincent

  Our office will be using Office 2011 for email contacts and calendar. Currently we are using apple mail/ical and address book. My primary concern is syncing calendars with google apps. That said our primary feature that we use google apps calendar for is sharing calendars. Best way to using office 2011... To sync calendars with an iPhone? To sync/share calendars between users? To sync contacts with an iphone? To sync/share contacts with between users? Users are on other computers and mostly work from home Needs to be fool proof once setup :-) I am not fond of the idea of syncing outlook with Mac address book and ical then to the iphone.

  Read the article

• Squirrelmail got error after installation whm

  - by Pleerock

  Just now installed whm/cpanel, created some accounts, created mail account in one of them and entered squirrelmail to check the mail. Unfortunately it gives me an error: Warning: fsockopen() [function.fsockopen]: php_network_getaddresses: getaddrinfo failed: Name or service not known in /usr/local/cpanel/base/3rdparty/squirrelmail/plugins/login_auth/functions.php on line 129 Warning: fsockopen() [function.fsockopen]: unable to connect to localhost:143 (php_network_getaddresses: getaddrinfo failed: Name or service not known) in /usr/local/cpanel/base/3rdparty/squirrelmail/plugins/login_auth/functions.php on line 129 How do I fix it? I don't know exactly, but I read some sites and maybe the problem in dns? I changed ns1.com to ns1.myhost.com in a Basic cPanel & WHM Setup P.S. Im sure that it server configuration problem, not squirrelmail, other mail clients are not working too..

  Read the article

• VMware Virtual vCenter and High Availability

  - by rufo

  To continue with this question: Should be Vmware vCenter server high available? According to the response there even if vCenter is down HA will continue to work. So, if my vCenter is a VM, using the express sql edition in the same VM, and that VM is hosted in the same cluster it manages (and the cluster is setup for HA): Am I correct to assume that if the host that hosts the vCenter goes down HA will vmotion the vCenter VM to another host and it will continue to function? BTW: my environment is small, two ESXi 5.0 hosts, with about 50 VMs, using iSCSI shared storaged for everything.

  Read the article

• Ho do you view all your monitoring software

  - by BLAKE

  In my office I have all our monitoring tools setup and working great, but I dont have an easy way to view them. I have a large TV in my office plugged into an old PC that has my nagios status page always showing. If I need to change anything on that computer I use Synergy to access the computer from my desktop. We are thinking about adding another TV and I want some suggestions on setting it all up. We are a 99.99% Windows shop. What do you use to run all the TV's in your helpdesk? Synergy works for me, but what if one of the other admins want to change the screen? Is there any easy way that any of us (currently 4 people) can change the screen from our desktops? (Remote desktop doesn't work because it locks the console which is the output to the TVs.) Any advice would help, Thanks.

  Read the article

• What are the default mount settings for mount / fstab?

  - by John Craick

  What are the default mounting options for a non root partition ? The man entry for mount says ... defaults - use default options: rw, suid, dev, exec, auto, nouser, and async. ... so that might be what we expect to see. But, unless I'm missing something, that's not what happens. I have an ext3 partition labelled "NewHome20G" which is seen as /dev/sdc6 by the system. This we can see from ... root@john-pc1204:~# blkid | grep NewHome20G /dev/sdc6: LABEL="NewHome20G" UUID="d024bad5-906c-46c0-b7d4-812daf2c9628" TYPE="ext3" I have an entry in fstab as follows ... root@john-pc1204:~# cat /etc/fstab | grep NewHome LABEL=NewHome20G /media/NewHome20G ext3 rw,nosuid,nodev,exec,users 0 2 Note the option settings that are specified in that fstab line. Now I look at how the partition is actually mounted after boot up ... root@john-pc1204:~# mount -l | grep sdc6 /dev/sdc6 on /media/NewHome20G type ext3 (rw,noexec,nosuid,nodev) [NewHome20G] ... so, when the filesystem gets mounted the exec & users options I specified seem to have been ignored. Just to be sure, I unmount sdc6, remount it and look at the mount options again ... root@john-pc1204:~# umount /dev/sdc6 root@john-pc1204:~# mount /dev/sdc6 root@john-pc1204:~# mount -l | grep sdc6 /dev/sdc6 on /media/NewHome20G type ext3 (rw,noexec,nosuid,nodev) [NewHome20G] .... same result Now I unmount the partition again, remount it specifying the exec option and look at the result ... root@john-pc1204:~# umount /dev/sdc6 root@john-pc1204:~# mount /dev/sdc6 -o exec root@john-pc1204:~# mount -l | grep sdc6 /dev/sdc6 on /media/NewHome20G type ext3 (rw,nosuid,nodev) [NewHome20G] ... and here the exec option has finally taken effect and the noexec setting has vanished. Just for interest, I re-mount the partition with the defaults option root@john-pc1204:~# umount /dev/sdc6 root@john-pc1204:~# mount /dev/sdc6 -o defaults root@john-pc1204:~# mount -l | grep sdc6 /dev/sdc6 on /media/NewHome20G type ext3 (rw,noexec,nosuid,nodev) [NewHome20G] The noexec is back, so it looks very like rw,noexec,nosuid,nodev are the default options which is NOT what man says. Why does this matter ? I have a folder full of useful scripts stored on a data disk. Because that disk is mounted noexec those scripts won't run, even though they have all been set with chmod 777. I can work round this in several ways but it's disappointing that the man entry seems to be wrong. Have I missed something obvious here or have the default options in Ubuntu changed from what they were a few versions ago ?

  Read the article

• Linux or Windows for a server?

  - by Matt

  I'm a Linux guy when it comes to (web) servers for the following reasons Legally free Fast software updates (Unless you're running Cent OS :) Powerful CLI management of services Easy to secure (in terms of users and groups) Web server software is, well, built for Linux... Apache, PHP, Python, etc, are Linux programs that get ported to Windows - I'm 90% sure of this Unless the web server needed to run ASP, I wouldn't use Windows. My boss' IT friend is a Windows guy, though. He recently got a server setup in the office to run Microsoft Exchange and some other shit. What I'm asking is, if he wanted to start running websites on this thing, what would be good reasoning to convince him otherwise? He's not very bright in terms of IT and the IT friend is all Windows. So it's two against one here... What would you say to running a Windows web server?

  Read the article

• Nodes inside Cisco VPN. Incoming SSH requests allowed. But can't initiate an outbound SSH.

  - by Douglas Peter

  I've a gateway-to-gateway VPN setup between my Linksys RV042 router and a Cisco VPN. I am able to SSH into any of the machine inside the VPN from my network. But none of the machines inside the VPN can initiate an SSH into my network. It seems they've blocked even all ping requests to my network gateway. This is the requirement: I have scripts that SSH into the machines inside the VPN and run a long mysql query. The query generates an output to a file. The time that these queries take is variable. So I have a loop in my machine that periodically SSHes into the VPN machine and checks if the query has finished, and pulls the generated file using SCP. I need to simplify it thus: The script will run at the machine inside the VPN, and when the query completes, it will SSH into my machine and pushes the generated file. Thanks for any ideas.

  Read the article

• Anonymous user with proftpd on fedora

  - by stukerr

  Hi there, I am trying to setup an anonymous user account on our server to enable people to downlaod technical manuals for our products etc. and I would like this to be as secure as possible! I was just wondering if anyone knew a series of steps that will allow me to create an anonymous ftp account linked to a directory on the server that enables download only ? Also how could i make a corresponding ftp account with write priviledges to this account to allow people within our company to upload new files ? Sorry i'm a bit new to all this! Many Thanks, Stuart

  Read the article

• Test Data in a Distributed System

  - by Davin Tryon

  A question that has been vexing me lately has been about how to effectively test (end-to-end) features in a distributed system. Particuarly, how to effectively manage (through time) test data for feature testing. The system in question is a typical SOA setup. The composition is done in JavaScript when call to several REST APIs. Each service is built as an independent block. Each service has some kind of persistent storage (SQL Server in most cases). The main issue at the moment is how to approach test data when testing end-to-end features. Functional end-to-end testing occurs through the UI, and it is therefore necessary for test data to be set up before the test run (this could be manual or automated testing). As is typical in a distributed system, identifiers from one service are used as a link in another service. So, some level of synchronization needs to be present in the data to effectively test. What is the best way to manage and set up this data after a successful deployment to a test environment? For example, is it better to manage this test data inside each service? Or package it together with the testing suite? Does that testing suite exist as a separate project? I'm interested in design guidance about how to store and manage this test data as the application features evolve.

  Read the article

• Virtual machine on ubuntu

  - by MITHIYA MOIZ

  I have configured virtual machine on ubuntu with the help of below article, https://help.ubuntu.com/9.04/serverguide/C/libvirt.html I managed to finish all the part except the major portion getting virtual host to talk to real network, Which I guess should be done only via bridge interface. Via virtual machine manager I try to choose any interface it gives me interface not bridged When I try to bridge the interceface eth0 as below auto br0 iface br0 inet static address 192.168.0.223 network 192.168.0.0 netmask 255.255.255.0 broadcast 192.168.0.255 gateway 192.168.0.1 bridge_ports eth0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off I cannot communicate with this interface to network, host server looses all the communication to network. But when I remote bridge interface from /etc/network/interfaces And configure eth0 as below it works fine The primary network interface auto eth0 iface eth0 inet static address 192.168.0.223 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 dns-nameservers 62.215.6.51 gateway 192.168.0.1 how can i setup bridge interface correctly and how would my /etc/netwrok/interfaces file would look a like.

  Read the article

• How do I host multiple SSL websites on a single EC2 instance using Amazon Elastic Load Balancers?

  - by Developr

  If I have 3 separate websites which all require SSL (separate certificates) that I want to host on the same EC2 instance(s) across multiple availability zones so that we have the ability to scale and be highly available, how do I achieve this using ELBs in my Amazon VPC? Each site requires a separate IP address, so I have added multiple private IPs to the EC2 instance, but I am unsure how to bind the ELB to a certain IP on the instance. I was also able to setup multiple ELB pointing to the same instance, but again, I am not seeing any way to bind each ELB to a separate IP on the instance. If this is not possible, what is the best option? Run each site on a separate EC2 instance / ELB combo (expensive and harder to maintain) Give each site a separate public IP and use Route 53 to do the load balancing (seems like a hack) Use a different load balancer option such as HAProxy that should be able to work like a normal load balancer appliance. Please help!

  Read the article

• Apache Front End....Tomcat back end...SSL question

  - by Jared

  Hi Everyone, Question.... I have Apache setup as my webserver. Tomcat is hooked into Apache via mod_jk, so the user never interacts with Tomcat. I have set up SSL on the Apache Webser...I can hit it with https:// localhost When I try to access my application at ...https://localhost/app I get a directory not found error. Catch is when I go regular http... I can hit it fine... http:// localhost/app What do I have to edit for this connection to work? I have uncommented the AJP connector in server.xml I have added my virtual host to httpd.conf What am I missing? Thanks in advance. Jared

  Read the article

• Cisco ASA 5505 - L2TP over IPsec

  - by xraminx

  I have followed this document on cisco site to set up the L2TP over IPsec connection. When I try to establish a VPN to ASA 5505 from my Windows XP, after I click on "connect" button, the "Connecting ...." dialog box appears and after a while I get this error message: Error 800: Unable to establish VPN connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection. ASA version 7.2(4) ASDM version 5.2(4) Windows XP SP3 Windows XP and ASA 5505 are on the same LAN for test purposes. Edit 1: There are two VLANs defined on the cisco device (the standard setup on cisco ASA5505). - port 0 is on VLAN2, outside; - and ports 1 to 7 on VLAN1, inside. I run a cable from my linksys home router (10.50.10.1) to the cisco ASA5505 router on port 0 (outside). Port 0 have IP 192.168.1.1 used internally by cisco and I have also assigned the external IP 10.50.10.206 to port 0 (outside). I run a cable from Windows XP to Cisco router on port 1 (inside). Port 1 is assigned an IP from Cisco router 192.168.1.2. The Windows XP is also connected to my linksys home router via wireless (10.50.10.141). Edit 2: When I try to establish vpn, the Cisco device real time Log viewer shows 7 entries like this: Severity:5 Date:Sep 15 2009 Time: 14:51:29 SyslogID: 713904 Destination IP = 10.50.10.141, Decription: No crypto map bound to interface... dropping pkt Edit 3: This is the setup on the router right now. Result of the command: "show run" : Saved : ASA Version 7.2(4) ! hostname ciscoasa domain-name default.domain.invalid enable password HGFHGFGHFHGHGFHGF encrypted passwd NMMNMNMNMNMNMN encrypted names name 192.168.1.200 WebServer1 name 10.50.10.206 external-ip-address ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address external-ip-address 255.0.0.0 ! interface Vlan3 no nameif security-level 50 no ip address ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name default.domain.invalid object-group service l2tp udp port-object eq 1701 access-list outside_access_in remark Allow incoming tcp/http access-list outside_access_in extended permit tcp any host WebServer1 eq www access-list outside_access_in extended permit udp any any eq 1701 access-list inside_nat0_outbound extended permit ip any 192.168.1.208 255.255.255.240 access-list inside_cryptomap_1 extended permit ip interface outside interface inside pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool PPTP-VPN 192.168.1.210-192.168.1.220 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-524.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface www WebServer1 www netmask 255.255.255.255 access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec transform-set TRANS_ESP_3DES_MD5 esp-3des esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_MD5 mode transport crypto map outside_map 1 match address inside_cryptomap_1 crypto map outside_map 1 set transform-set TRANS_ESP_3DES_MD5 crypto map outside_map interface inside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash md5 group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd enable inside ! group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.1.1 vpn-tunnel-protocol IPSec l2tp-ipsec username myusername password FGHFGHFHGFHGFGFHF nt-encrypted tunnel-group DefaultRAGroup general-attributes address-pool PPTP-VPN default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key * tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! ! prompt hostname context Cryptochecksum:a9331e84064f27e6220a8667bf5076c1 : end

  Read the article

• Can the Windows 8.1 update be applied without local terminal?

  - by Ben Voigt

  It is possible to access the Windows Store from a remote desktop session and initiate the Windows 8.1 Update from the Windows Store, but the update hangs after the first reboot, likely waiting for the user to accept the license check. This leaves the computer unusable remotely. Is there a way to pre-accept the license terms so that the update can complete autonomously? Perhaps an UNATTEND.XML such as would be used for an unattended clean install? Failing that, is there a way to connect with remote desktop during that phase of the install (it appears to be GUI-mode setup running with the usual Windows kernel and full OS)?

  Read the article

• Netinstalling CentOS if the gateway is in a different subnet

  - by James Lawrie

  I have a KVM host (A) running a virtual machine (B). They each have their own external IP address and the networking is setup using bridging between eth0 and br0 on A. B uses eth0, with A being the gateway. The problem is that the two external IP addresses are on different subnets (different /8s in fact) so by default, B claims it cannot reach A (Network Unreachable). I can resolve this by adding a static route on B: echo "any host gateway_ip dev eth0" > /etc/sysconfig/static-routes Modifying /etc/init.d/networking to reload the gateway after applying static routes (I only added the final line before fi): if [ -f /etc/sysconfig/static-routes ]; then grep "^any" /etc/sysconfig/static-routes | while read ignore args ; do /sbin/route add -$args done route add default gw "${GATEWAY}" fi If I then restart networking, it comes online. How can I do this (or work around it some other way) prior to the system being installed, ideally inside an Anaconda kickstart file?

  Read the article

• Multiple Users Sharing Email Accounts - How to make messages "unread" for each user?

  - by Ralph N

  Sorry if this isn't appropriate for webmasters stackexchange, but i'm not sure where it would go since it has to do with the logistics of setting up a website/email for a small company. I have an ecommerce store with multiple addresses such as: - [email protected] - [email protected] I'm not the only person managing the store. My partner and I both have those email accounts set up on each of our respective computers (right now it's using IMAP - he's on outlook and i'm on thunderbird). We have one major problem with this setup - If I read an email before he does, he doesn't know it ever arrived because the IMAP tells the server that the email has been "read". Of course, the same problem exists if he reads an email before I do. I understand that i can fix this problem by switching to POP3 and leaving the messages on the server. I'm okay with that... but it creates a NEW PROBLEM. If he replies to an email, it is no longer sync'd back to the server and therefore I can't read any emails that he has sent out. Same problem vice versa. This is also important for us because we want to know if one of us has already replied to an email so that the same thing isn't being done twice. With IMAP, all our sent emails are put in the Sent folder and synced to the server. What's a good way to set this up for a small company where email sharing is involved? My website is hosted on arvixe business ASP...

  Read the article

• High Availability Configuration using Heartbeat and Pacemaker

  - by pradeepchhetri

  I have the following setup: I have configured high availability between two load balancers (HAProxy) so that if HAProxy1 get down, the floating IP gets transferred to the other load balancer HAProxy2, hence all the clients will get the response from HAProxy2, which at the back-end is doing LB among the sme two webserver. This is for removing the single point of failure in case of only one HAProxy. Whenever I stops the hearbeat in HAProxy1, the floating IP goes to HAProxy2. But I want to configure such that whenever the process haproxy goes down, the floating IP should get assigned to HAProxy2. Can someone tell me how to implement it ?

  Read the article

< Previous Page | 488 489 490 491 492 493 494 495 496 497 498 499  | Next Page >