Search Results

Search found 56140 results on 2246 pages for 'super computer'.

Page 496/2246 | < Previous Page | 492 493 494 495 496 497 498 499 500 501 502 503  | Next Page >

• laptop motherboard "shorts" when connected to adapter

  - by Bash

  Disclaimer: I'm sort of a noob, and this is a long post. Thank you all in advance! summary: completely dead laptop with no signs of life whatsoever (suddenly, for no apparent reason) Here's the deal: Lenovo Y470 (only a few months old with no water or shock damage). It stopped working suddenly (no lights, no sound, even when connecting adapter with or without battery). I tried a different adapter (same electrical rating), but no luck. I disassembled the thing completely, and tried plugging in the adapter and looking for signs of life with all different combinations of components installed (tried all combinations of RAM, CPU, USB power cords, screen, etc plugged in). no luck. Then, I noticed (as I was plugging in the adapter to try for the millionth time) that there was a "spark" for an instant when I first connect the adapter to the power jack. The adapter's LED would then flash (indicating it isn't working or charging). So, I thought the power jack has a short of some sort (due to bad soldering or something). Scanned virtually every single component on the motherboard, and tested the power jack connections with a multimeter. No shorts or damage to anything on the entire motherboard. Now I'm thinking I need to replace the motherboard. But, my actual question: What does this "shorting" when connecting the adapter signify? (btw, the voltage across the power connections and current through it drop to virtually zero when the adapter is connected and "sparks", and they stay that way). The bewildering thing is that there are no damaged components, and the voltage across adapter terminals returns to normal after I disconnect it (so it's not damaged). Please take a look at the pictures (of the motherboard's power connection and nearby components) and see if I'm missing something completely obvious... Links to pictures and laptop and motherboard model: pictures on DropBox Motherboard model: LA-6881P Laptop model: Lenovo IdeaPad Y470

  Read the article

• HP Envy screen brightness .. stuck

  - by Sonic Soul

  once in a while, the screen brightness stops responding to any reason, and stays on full brightness.. for those of you that have HP Envy, you know what this means... battery suicide. the FN+* controls don't work. i also tried going in to power settings and adjusting all modes brightness to low wend of spectrum, after saving, it has no effect.. i suppose i could try rebooting as i always just put my laptop to sleep :/ anyone came across this ?

  Read the article

• Acer Aspire 1360 Recovery CDs

  - by John

  I have replaced a dead hard disk in an out of warranty Acer Apire 1360 laptop. The two recovery CDs I have dont appear to be bootable, they just contain .hdd and .ghs (image?) files. On the original broken hard drive there was a hidden partition which could be invoked by pressing alt+f10 when booting. You would then be prompted for the 2 recovery CDs to perform the restore. Obviously the new hard drive does not contain the hidden Acer recovery partition. This being the case, how do I go about restoring Win XP? The 2 CDs are called Aspire 1360/1520 Serires Recovery CD Disk 1 of 2 and 2 of 2. Am I missing a futher bootable recovery CD? Can anyone confirm how many restore CDs originally came with the laptop.

  Read the article

• How do you install Firefox plugins from a file?

  - by Ethan

  I would like to install this SQLite Manager plug-in for Firefox on Mac OS X. However, the page advertising the plug-in does not offer the customary "get addon" link (or whatever it's called). There is only the possibility of downloading files. Such as: SQLiteManager_0.5.0b5.xpi How do you use that to install the plug-in?

  Read the article

• How do you backup your localhost ?

  - by justjoe

  i have method to backup my work on localhost based on week basis. i use multipe dos command and save in on a bat file. i use command such as copy and xcopy and save my localhost to another place. After my server grow larger, i think it take too much space. So tehre is a way to solve this problem ? maybe a software that can track changes on our php code or another method to preserve your code when thing go bad ? EDIT : I use windows xp sp2, on XAMPP Apache PHP 5.2.1 the localhost refer to my laptop. i install the localhost server here

  Read the article

• How to enable the php 5.4.x version on Mountain Lion

  - by skiabox

  I have installed the latest php version on my mountain lion system using these instructions (http://mac.tutsplus.com/tutorials/server/upgrading-the-native-php-installation-on-os-x-mountain-lion/). I even put /usr/local/bin first in my path variable, so when I run php -v at the command line I get php v5.4.x The problem is that when I run a simple script (with the phpinfo() function inside) the page tells me that I am running the old 5.3.x php version that comes pre-installed with mac os mountain lion. I even tried to restart apache, but the problem remains. Any ideas on this one? Thank you.

  Read the article

• Ripping CD Audio simultaneously from 2 drives on one PC via USB or PATA - rip accuracy preserved?

  - by Rob

  I'm considering ripping audio (reading audio) from CDs using 2 drives simultaneously to speed up the process of ripping the CDs - i.e. 2 at a time rather than 1. Are there any issues with achieving maximum rip accuracy? In general I wondered if people have tried this and if the simultaneous streams from both rip activities would overload the host machine and cause packet loss or read retries resulting in a sub-standard CD-DA Audio CD rip? If it just means the rip is slightly slower (but still faster than sequentially doing one rip followed by another) but still of maximum accuracy then that is OK for me. I will be using dbPowerAmp to rip the CDs and converting to FLAC lossless format. Specific examples: There are 2 machines I intend to do it on: A Toshiba NB100 1.6Ghz Atom netbook, 2Gb RAM, running Windows XP Home with 1 external LG DVD/CD burner and external 1 LG Blu-ray burner attached via USB 2.0, ripping to the machine's 5400rpm internal hard drive. This rips from one CD drive very well, more than adequate, it is a nippy, fast little machine for its specification. A Desktop PC running Windows 7 Home Premium with MSI P4M900M2-L/ MS-7255v2.0 motherboard and 1.86Ghz Intel Core 2 Duo E6320, 7200rpm hard drive and 2Gb RAM, with an internal LG PATA DVD/CD burner (master) and a Philips DVD/CD burner (slave) on the same PATA bus (perhaps separate buses would be another option to consider here). Thoughts?

  Read the article

• Is there any way to customize the Windows 7 taskbar auto-hide behavior? Delay activation? Timer?

  - by calbar

  I'm becoming increasingly frustrated with the way Windows 7 handles showing a hidden taskbar. It's incredibly over-eager to pop out and obscure what I'm really trying to interact with, requiring me to move the mouse away, wait for it to auto-hide again, then resume what I was doing but more deliberately. After closely examining the behavior, it appears that a hidden taskbar "peeks out" from the edge by 2 or 3 pixels, and slowly moving your mouse into this area activates it; you don't even need to touch the edge of the screen. I would love it if there was a way to customize or change this behavior. Ideally, the taskbar would only pop out if you are actively "pushing" the edge of the screen it is hidden on. So activation only occurs once you've reached the screens edge and continue to move the mouse past a customizable threshold. Alternatively, a simple activation delay would suffice as well. So only if the mouse remains in that 2-3 pixel area (a.k.a. on the taskbar) for greater than a customizable amount of time does it pop out again. This would only be a fraction of a second. Often times the cursor simply "careens" off the edge of the screen while trying to focus on something nearby. Anyway, if there are any registry settings or utilities that can achieve either of these effects, that would be great! Thanks for your help.

  Read the article

• Where is xorg.conf in Ubuntu 10.04?

  - by Mikey.B

  Hi Guys, I'm in the middle of trying to setup dual monitors on ubuntu and would like to backup my xorg.conf... The documentation I've been thus far say to do the following: sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf_backup But I don't see the xorg.conf file anywhere... Am I missing something? Where is this located?

  Read the article

• Sync files between Mac, PC and Linux automatically

  - by Siriss

  Hello everyone- I have a MacBook Pro, a Windows 7 desktop, and a Fedora 13 netbook. I have been searching far and wide for an automatic solution to sync files (pictures, music, docs, etc...) between the three when they are all on the same LAN. To better explain, when I get home and turn my MacBook on, I want it to sync automatically any file changes to Windows 7 and the netbook. Likewise if I make changes on my Windows 7 box, I want them to be reflected on my Mac. I can use rsync, but it is not automatic as far as I can tell, and I would use Dropbox but I have a lot more that 2 gigs and do not want to pay. I also do not need internet syncing. I just want local LAN. Does anyone have any ideas? Thank you very much in advance.

  Read the article

• How to bypass resume from hibernate

  - by Daniel Trebbien

  I am attempting to resume a Windows Vista laptop from hibernate, but the resume process seems to be stuck in an endless loop in which Windows is repeatedly trying to read from the optical drive. When I press the Power On button on the laptop, the screen is black (not even the backlight turns on) and the following occurs in a loop: Five seconds pass and I hear the optical drive being accessed. (There's no disk in the drive, so it sounds like a short buzzing noise.) Two seconds pass and I hear the optical drive being accessed. Two seconds pass and I hear the optical drive being accessed. So it's three short buzzing noises in a row, over and over again. Eventually I have to abruptly power off the machine. I have tried inserting a data CD into the drive as well as a bootable CD (a live Linux distro boot disk). For both, the optical drive spins up for a bit, but stops after Windows decides that the disk is not what it is looking for. I have since lost the Windows Vista recovery DVD, but I don't know if inserting the recovery disk into the optical drive would have a different effect than the bootable CD. I have tried pressing F8 immediately after pressing the Power On button (hoping to enter System Restore), but that did not have an effect. Is there a special key sequence that will cause Windows to bypass resuming from hibernate, effectively ignoring hiberfil.sys?

  Read the article

• How to get better video quality in Lync?

  - by sinned

  I want to use a ConferenceCam from Logitech to stream talks live via Lync. When I view the RAW webcam image via VLC, the quality is very good (but the latency is high because of buffering). However, when I stream it using Lync, the video gets blurry. Is there a way to ensure QoS in Lync or otherwise improve the video quality to (near-)native? I would rather have some dropped frames than a lower resolution where I can't read the slides. In my setup, I use Lync with an Office365-E3 contract, so I have no Lync-Server in my network. I thought about replacing Lync completely with VLC, but I first want to try Lync because VLC will probably cause firewall issues. Also, I haven't looked up the VLC parameters for less buffering, faster encoding, a bit lower resolution (natively it's more than HD) and streaming.

  Read the article

• How to repair Mac OSX without reinstalling?

  - by RahulVyas

  I have an intel PC. I have installed iDeneb Mac OS X in my pc. It's running fine. After that I thought to install Snow Leopard for running the iPad SDK. So I bought a retail Snow Leopard and boot it with Rebel EFI boot loader. When I was installing Snow Leopard, at the end of installation, setup gives an error. So I restarted my PC and boot with Rebel and I saw that mac was there so I boot that into safe mode and Mac OSX runs. After that I install iPad SDK. But when I try to create an application, XCode is not responsive. It hangs when I choose new project, give it a name and save it on disk. After just as I gave name and choose save it hangs. Is there any way i can repair my Mac OSX without reinstalling? I have also unable to boot into normal mode and also without Rebel CD. So I want to boot without Rebel CD and also want to run iPad SDK so please help me to solve this problem.

  Read the article

• Where can I find a useful Unicode fallback font for Mac OS X?

  - by Stephen Jennings

  On every browser I've tried (Firefox, Safari, Chrome, and Omniweb), when I go to a web page containing somewhat less-common characters, I can't see the glyphs. For example, on the Wikipedia page for the Bengali Language, the very first line contains a string of squares; on Windows, I can see the Bengali writing. On Windows, as long as I have the Arial Unicode MS font installed, these characters fall back to that font and display properly. Mac OS X doesn't seem to ship with a font containing these Unicode characters (it has Arial Unicode MS, but it must be a subset of the Windows version because Bengali doesn't display in that font). I checked on my Snow Leopard DVD and I installed "Additional Fonts" from the Optional Installs package, but I'm still missing many languages. Is there any good, free font that contains a large collection of languages? I know creating fonts is difficult and time-consuming, but it seems like including at least one font like this with operating systems should be standard by now.

  Read the article

• Firefox add in to display (and allow me to copy) the fragment id of a section

  - by justintime

  Is there a Firefox add-on (or other method) to find out what fragment id such as http://example.com/page#fragment - I would like to be able to bookmark a reference to a large page (or paste into an email/ posting ). To date I have viewed source and looked for such stuff as below - but it can be fiddly waiding through a big file. <a name="fragment"></a> <h2 id="fragment"> Thanks

  Read the article

• Export an Excel spreadsheet to fixed-width text file?

  - by jkohlhepp

  Excel has the functionality to import fixed-width text files where it presents a dialog that lets you choose where the begins and ends of fields are which it puts into columns. Does it also have functionality where, given an existing spreadsheet, you can export to a fixed-width text file? If so, how do I access this? I have tried using Save As and choosing Text File but it seems to only save as Tab-delimited which doesn't help me. This is Excel 2003 if it matters.

  Read the article

• Why doesn't the People Pane in Outlook 2010 show appointments for individual contacts?

  - by Curtis

  Outlook 2010 will not show appointments in the people pane. Under the activities tab if I go to All Items then eventually the appointments will show, but this takes a seriously long time. If I then click off the tab to look at another field then return to All Items, all the appointments are gone again. I need to be able to: Open a contact and see when that contact has appointments Open an appointment and see which contacts are attached to that appointment It works well from the appointment card to the contact, but has me completely frustrated going from the contact card to find the appontments. I have tried many things but cannot solve this problem. My set up is as follows: Exchange Server Windows 7 Ultimate Indexing enabled Cached exchange mode enabled Help! This is the whole reason I installed Outlook 2010.

  Read the article

• Windows XP does not list WPA wireless networks

  - by Tomalak

  What can be the reason that Windows XP does not show WPA-encrypted wireless networks? The laptop I have problems with is an older model (Toshiba Satellite Pro 6100) with Windows XP SP3 on it, fresh install. The wireless network card in it is an Agere product that lists as "Toshiba Wireless LAN Mini PCI Card". The networks showed up perfectly before I first tried to connect to one (it was set to WPA2). The connection failed (the card supports WPA only), then something must have happend and Windows hides these networks now. A manually configured WPA setup via Windows' own wizard works, I'm using it right now. The network just won't show up in the list of available network on its own. I suspect that XP incorrectly set a flag somewhere that this network card does not support WPA. Is there such a flag, and if so, how can I change it back?

  Read the article

• synergy-plug is there some kind of log or error control?

  - by ufk

  Hiya. I configured synergy-plus server and client as described in the following url: http://www.engadget.com/2005/08/09/how-to-share-your-keyboard-and-mouse-in-realtime-with-synergy/ I didn't find any info indicating that there is a log file or any error control to see if the client connect correctly. how can i troubleshoot ? Trying to connect between Linux OS and Snow Leopard. this is my server configuration file: (music snow is the snow leopard, tux-in is the linux) section: screens tux-in.local: music-snow: end section: links tux-in.local: right = music-snow music-snow: left = tux-in.local end

  Read the article

• few questions about imaging the os

  - by user23950

  How much time will it take to backup 49Gb? Here are the details: os: w7, processor-dual core 2.50 Ghz, 2Gb ram. -I'll use the free version of macrium reflect. I will back it up on a phd from seagate. And I have installed. Ms visual studio 2008, netbeans, and some from master collection cs4. I will only backup 1 partition.

  Read the article

• My hard drive seems to be overheating... what should I do?

  - by George Edison

  After a cold boot, the hard drive in my notebook jumps to 56? within an hour or so of idling. Is 56? a cause for alarm? Notes: The notebook is on a flat desk and none of the vents are obstructed. The video card is currently at 55? and the CPU at 50?. It's a Western Digital 250GB hard drive. SMART reports the drive healthy but does warn that: Edit: this problem had a very surprise ending. I inverted the notebook and unscrewed some of the panels on the back (there was one covering the hard drive, and one that provided access to the memory). I couldn't see any dust, so I simply screwed everything back together and powered it on... and it worked! The temperature is now staying at 46?, and it feels notable cooler to the touch. So I can only assume that some internal fan was malfunctioning or something. Whatever the case, it's working now so I won't complain. Edit: I have an SSD now, so temperature isn't as big an issue as it was when I had a mechanical drive.

  Read the article

• Windows 7 Disk Management Spanned Volume vs Striped Volume

  - by Kairan

  Im looking for a reason why a person would use a Spanned volume rather than a Striped volume? If my understanding is correct Striped: Faster read/write speed than spanned, but I "assume" more wear+tear Spanned: No speed benefit like striped, but data is written sequentially and fills up Drive1 before filling up Drive2, so it saves on wear+tear Beyond that Im not sure if there is any other deciding factor on which to use. Definition found below: A striped volume uses the free space on more than one physical hard disk to create a bigger volume. Unlike a spanned volume, a striped volume writes across all volumes in the stripe in small blocks, distributing the load across the disks in the volume. The portions of disk used to create the volume need to be the same size; the size of the smallest free space included in the striped volume will determine.

  Read the article

• Add bookmarks to Delicious and Google Bookmarks at the same time

  - by BrianH

  I have used delicious.com (or back then, del.icio.us) to store my bookmarks for a long time now, and I love it. I was looking through some of my Google services, and realized they have a bookmarking service that integrates with your Google searches (I thought they had a bookmarking service before, but it went away? Maybe not). I like delicious just fine - I'm not interested in leaving. But I also like how my Google bookmarks are highlighted (and I'm guessing, brought to the top) in my search results so I can easily tell if I've bookmarked a site (kind of like the "promote up" feature). I can't even count the number of times I search for a site only to find I've been there months or years ago. If sites I've bookmarked in the past are highlighted in my search results, it makes it easier to pick which search result to go to. My question is around bookmarking tools: Is there a bookmarklet or Firefox addon that will let me save a bookmark to multiple services at the same time, in this case, Google and Delicious? Or maybe a service to sync my delicious bookmarks to Google bookmarks on a regular basis? I have used the Delicious addon since the beginning - it would just be nice to add a bookmark to multiple services with 1 addon. For that matter, it would be nice to add Evernote into the mix - click 1 button to save the page to Evernote, and bookmark the page in Google and delicious. EDIT on 7/30/2009 - Summary: A proposed solution is to use the Delicious addon and the GMarks addon to keep the 2 services in sync. I was not able to get the 2 addons to keep everything in sync, so it was also suggest to use the Google Toolbar with the Delicious addon to keep everything in sync. I personally have reservations with letting Google know about every single site I visit, I believe this solution will work, so I am accepting it as the answer. I still wish there was a solution that would let you post a bookmark/page to multiple services at the same time (delicious, google, evernote, digg, diigo, etc.). Thanks!

  Read the article

• Is there way to use Windows Easy Transfer on Windows Server 2008

  - by CJM

  At work, I'd been experimenting with using Windows Server 2008 as a desktop machine - I'm a s/w developer so some of the server software was particularly appropriate, but back in the day there was a suggestion that Server 2008 would be faster than Vista (mainly because of less bloat). I'm now wanting to move across to a new Windows 7 workstation; not only does Server 2008 not have Windows Easy Transfer, but I can't attack the problem from the Windows 7 end either - when I try to run the migration wizard it claims that the software 'isnt compatible with this version of Windows'. I'd bet that it would work fine, if only it wasn't for the arbitrary version check... Is there any way to coax this software into working? If not, any good alternatives to Windows Easy Transfer - I don't fancy having to manually copy application settings etc across myself...

  Read the article

• How to copy text from Java program?

  - by Mohd. Ismail

  I am using one Java program called JDownloader v0.9.581 and want to copy full file and link list from main scrolling window. JDownloader is not having any way to save full list as text file. I am already trying all programs from Is there any way a user can view or copy non-editable GUI controls' contents at runtime? and Read the contents of a ComboBox (or any other windows control) and also many other programs from Google like GetWindowText. But nothing is allowing me to copy full text from a Java program like this. Someone is telling me - do printscreen and OCR - but that is not good way for me. How I can copy full text from JDownloader?

  Read the article

< Previous Page | 492 493 494 495 496 497 498 499 500 501 502 503  | Next Page >