Search Results

Search found 15798 results on 632 pages for 'authentication required'.

Page 497/632 | < Previous Page | 493 494 495 496 497 498 499 500 501 502 503 504  | Next Page >

  • torrent downloads not showing on Squid log

    - by noobroot
    hello, i have just a few months working as sysadmin, hence i still have lots to learn, first thing id like to do is as follows: We have an OpenBSD 4.5 box acting like firewall,dns,cache etc, the box has 2 network cards, one conected directly to the internet and the other to our switch, i used to work with sarg for the log analysis but then changed to the much faster free-sa. I use a daily free-sa report to check the bandwidth usage and report our top 5 bandwidth consumers (3 days a week being #1 and you will be buying the pizzas :D, we are a small company ~20 so we are very familiar). this was working really good until recently, one of us required to download some stuff via torrent (~3GB) and since the pizza rule is active for non-work related downloads, he told me (verified) that his download was indeed work related so i would dismiss that 3GB off his quota, but to my surprise the log didnt showed that 3GB, since his ip consumption was only around 290MB. More recently, since the FIFA world cup started, we know that some of the employees are watching the match's streaming, we know it and we dont care about it since, like already stated, we are a small company so we dont have restrictive policies, we all can chat, watch youtube, download anything we want BUT we are only allowed 300MB a day otherwise you'll get in the top5-pizza-board, anyway, that streaming consumption is also not showing in the free-sa reports. So my question is, why is these data being excluded from the reports? im thinking that the free-sa reports list only certain types of things but im also thinking if are the squid logs the ones that are not erm... logging these conections. Any help, guide, advice or clarification is appreciated.

    Read the article

  • How to handle files that don't need version control in mercurial

    - by richardh
    I am new to mercurial, and for the most part do LaTeX reports and statistical calculations in R using .csv and/or .sqlite files. Re LaTeX, all I really care is the .tex file. Re R, I don't need version control on the .csv or .sqlite files because they are static. When I do 'hg add' for a repo with a .csv and/or .sqlite file, I get a warning like: rev2.sqlite: up to 3070 MB of RAM may be required to manage this file (use 'hg revert rev2.sqlite' to cancel pending addition) So I revert and subsequently use adds like hg add -X *.sqlite. I guess I really have two questions: (1) Should I ignore these warnings? Because these large files are static, can I just add to the repo knowing that the diff files will always be empty and not worry about wasted resources? (2) If I should keep excluding these files from the repo, is there away that I can fix this option? I.E., add to my .hgrc file something that always appends an option like -I *.tex -I *.R to my 'hg add' commands? Thanks!

    Read the article

  • Missing Boot Manager in Vista

    - by Selase
    I am in really deep trouble here and would need advice. A message just pop up on my screen and I had to restart my laptop. Upon restarting the Boot Manager got corrupted. I am running Windows Vista 32 bit by the way. I got onto Google with a friend's PC and found two basic ways of fixing it. The first one that requires Windows to automatically fix it using Startup repair ends up with the error message: Startup REpair cannot repair this computer automatically The second option that requires me to rebuild the BCD scans my system and finds the operating system on drive D:\Windows which I believe should be C:. If I hit Y(yes) for the rebuild process to take place I get the message The required system device cannot be found I then try the second option which requires me to recreate the BCD Store. It ends up with an error message that says: The store export operation has failed. The requested system device cannot be found Proceeding from there is meaningless since the system device cannot be found. I somehow believe the device cannot be found because it's identifying the Windows installation on D: instead of C: but how to change that I have no idea. I don't know how it happens to identify an operating system on D: when there's none there. How do I go about fixing the Boot Manager? I have very important files on my system and can't afford to reinstall Windows. I really need to fix this.

    Read the article

  • SSH does not allow the use of a key with group readable permissions

    - by scjr
    I have a development git server that deploys to a live server when the live branch is pushed to. Every user has their own login and therefore the post-receive hook which does the live deployment is run under their own user. Because I don't want to have to maintain the users public keys as authorized keys on the remote live server I have made up a set of keys that 'belong's to the git system to add to remote live servers (In the post-receive hook I am using $GIT_SSH to set the private key with the -i option). My problem is that because of all the users might want to deploy to live, the git system's private key has to be at least group readable and SSH really doesn't like this. Here's a sample of the error: XXXX@XXXX /srv/git/identity % ssh -i id_rsa XXXXX@XXXXX @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ @ WARNING: UNPROTECTED PRIVATE KEY FILE! @ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ Permissions 0640 for 'id_rsa' are too open. It is required that your private key files are NOT accessible by others. This private key will be ignored. bad permissions: ignore key: id_rsa I've looked around expecting to find something in the way of forcing ssh to just go through with the connection but I've found nothing but people blindly saying that you just shouldn't allow access to anything but a single user.

    Read the article

  • Is there any way to synchronize AD users with Office 365 but still be able to edit them online?

    - by Massimo
    I'm performing a migration to Office 365 from a third-party mail server (MDaemon); the local Active Directory doesn't include any Exchange server, and never had any. We will need directory synchronization in order to enable users to log on to Office 365 using their domain credentials; but it seems that as soon as you enable directory synchronization, you can't perform any action anymore on Office 365 users: all changes need to be made on the local Active Directory, and then replicated by the synchronization process. For ordinary users with a single e-mail address and standard features, this is not a big problem; but what about users which need an additional address? What if I need to configure some nonstandard setting, like "hide from address list" or a custom mailbox quota? From what I've gathered, the only supported way to do this, as you can't directly edit Office 365 objects anymore after synchronization is enabled, is to extend the local AD schema with Exchange attributes, and then manually edit them (!). Or, you can install at least one local Exchange server, and then use the Exchange administrative tools to configure the required settings. Is this correct or am I missing something? Is there any way to synchronize user accounts and password, but still be able to edit user settings directly in Office 365? If not (everything really needs to be set locally and then synchronized), is there any simpler way to do this than manually editing LDAP attributes or installing a local Exchange server?

    Read the article

  • How to configure hostname for `apache22` package on FreeBSD?

    - by Eonil
    I'm configuring development & test FreeBSD machine on VM. I installed apache22 package and restarted. But the daemon does not started with this error: %apachectl start httpd: apr_sockaddr_info_get() failed for test.box httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName (13)Permission denied: make_sock: could not bind to address [::]:80 (13)Permission denied: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down Unable to open logs % My hostname is test.box. Because this is temporary test box, it has no real domain-name. But I used 2-level name to avoid long time waiting of sshd on booting. However, I searched web, and I modified /etc/hosts file like this (I didn't touches this file before): # This is original configuration #::1 localhost localhost.my.domain #127.0.0.1 localhost localhost.my.domain # New configuration ::1 localhost test.box 127.0.0.1 localhost test.box 127.0.0.1 test.box test Now apache fails with this error message: %apachectl start httpd: Could not reliably determine the server's fully qualified domain name, using test.box for ServerName (13)Permission denied: make_sock: could not bind to address [::]:80 (13)Permission denied: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down Unable to open logs % I don't know what's required now. Please let me know reason and solution of this error. ---- (edit) ---- The permission errors are caused from omission of sudo.

    Read the article

  • The BitLocker encrypted logical drive of my laptop is not accessible. On clicking error appears,"Application not found"

    - by Nauman Khan
    I had an important personal data that was stored in my laptop drive 'F'. My 4 year old son also uses my laptop to play games. To secure my data I used bitlocker software that was already there in my windows 7 ultimate 32 bit. I am using a Dell D 630 Core2Duo laptop. The thing worked fine for me and I have been able to access my data in drive 'F' as and when I required. But today, when I tried to open my 'F' drive, an error box appeared saying "Application not found". I right clicked and checked 'properties' of 'F' drive. It showed me Used Space = 0 bytes and Free Space = 0 bytes. I opened 'Disk Management' which showed my 'F' drive file system as 'Unknown (Bitlocker Encrypted). 'Disk Management' is also showing my 'F' drive as healthy logical drive. I opened 'Manage bitlocker' and found that my 'F' drive was being shown locked and 'Unlock Drive' was displayed against it, however, when i click on 'Unlock Drive', it does not function. I opened 'TPM Administration' and found an information that 'Compatible TPM cannot be found'. My bitlocker encryption was working fine which means that I had a compatible TPM in my laptop. Where has it gone? How can I enable it? Is my 'F' Drive lost forever and thus the data in there as well?

    Read the article

  • email attachments [closed]

    - by Alan Doolan
    My company currently use software on a local machine that will take an email from the email server, extract the attachment, rename it and then add it to a folder on a webserver using ftp. This works well but they are currently asking if it can be done 'in the cloud' or what they really mean, not local. Is there any thing that would do this on the server itself? I should clarify a bit. The attachements are various reports that are being sent to different email addresses (mostly google corporate and free accounts). We need the reports to be on a folder on a webserver so that internal pages can take the information in the reports (csv) and use it on the webpages or adds them to a separate database. The key part being that the files need to be in the particular folders. Though it does work to have a computer running software that will take the files, renames them to the required name and uploads them to the folder it relies too heavily on one computer working all the time. This is not something we can depend on at this point. I'll be honest, I'm a web developer and not strong with server systems past my particular standard requirements so this is beyond me. though yes, I am aware that my boss is not 100% sure what 'cloud' means but likes the word.

    Read the article

  • How can I make a copy of a printer in Win7?

    - by hawbsl
    Has anyone been able to copy an existing printer in Win7? I know that we were able to do this in XP (not as a direct copy/paste, but by installing the printer twice) but in Win7 it doesn't seem to be possible. Googling the answer is hopeless because searching for "copy printer" or "duplicate printer" you get a bunch of posts about "printer copiers" or people complaining about duplicate printers getting created in the background (precisely what I'd like to be able to do) It'd be good to know how to do it in general, but if it depends on the printer type, then in our case we are trying to make a copy of an HP Laserjet. Tried installing from the CD - but the CD is too old for Win7 Tried installing via Add Printer and that seems to install the printer but it's marked with an error. Tried installing via the .exe installer from the HP site and that does result in a successful printer being installed, but it won't let you install the same printer twice (stalls on the "insert USB cable now" step - simply won't enable the greyed out "Next" button). The reason this is required is so that we can print to one to the feeder and to the tray separately.

    Read the article

  • Seeing traffic destined for other people's servers in wireshark

    - by user350325
    I rent a dedicated server from a hosting provider. I ran wireshark on my server so that I could see incoming HTTP traffic that was destined to my server. Once I ran wireshark and filtered for HTTP I noticed a load of traffic, but most of it was not for stuff that was hosted on my server and had a destination IP address that was not mine, there were various source IP addresses. My immediate reaction was to think that somebody was tunnelling their HTTP traffic through my server somehow. However when I looked closer I noticed that all of this traffic was going to hosts on the same subnet and all of these IP addresses belonged to the same hosting provider that I was using. So it appears that wireshark was intercepting traffic destined for other customers who's servers are attached to the same part of the network as mine. Now I always assumed that on a switch based network that this should not happen as the switch will only send data to the required host and not to every box attached. I assume in this case that other customers would also be able to see data going to my server. As well as potential privacy concerns, this would surely make ARP poising easy and allow others to steal IP addresses (and therefor domains and websites)? It would seem odd that a network provider would configure the network in such a way. Is there a more rational explanation here?

    Read the article

  • Connecting SVN from Remote Server

    - by Ashish
    I have hosted my repository in assebbla & it works fine. now I want to write a script that can automate the build process : 1. Take the code from assembla repository 2. Make a dump and copy it onto my web server. what I have researched from net states that use of commands like svn co svn+ssh://[email protected]/home/svn/test I believe I need to open Shell on my server and type these commands but shell has been disabled from my server admin. I tried to run the same from php using exec , admin has disabled that too. (am using shared hosting and want to do a automated deployment using these simple steps. i don't want to bring my local system in this process) now am not sure even if I get the shell access open to my server these commands like svn will work there as I don't have SVN installed on my server (its installed on assembla). kindly let me know if any more explanation is required regarding the same or if am going on the wrong track. Am a newbie so please be descriptive in answering :) Thanx in advance Ace

    Read the article

  • Scaling a LAMP website hosted on EC2

    - by Gublooo
    Hello, I'm very new to all this - I've recently managed to launch my website on EC2. As next step, I want to learn how to scale the website. I have a general idea but wanted some input from the experts about how to go about it. My website is based on LAMP but also has Red5 server which allows users to record messages and also used for playing them back. Currently this is the architecture I'm planning to setup for initial scaling. Deploy four small EC2 instances for the following purposes: Instance-1: On this instance I will run the MySql database Instance-2: On this instance I will run the red5 server Instance-3 & Instance-4 These 2 instances will be used to deploy the website and will have Apache running on them. They will communicate with the mysql server on Instance-1 and red5 server on Instance-2 using the internal IP address. As an when required, I will launch another instance of the same EBS - I will have EBS of say 50 GIG where all the mysql data will be stored. Also red5 will use this EBS to store the video messages Load-Balancer - Use the load balancer provided by Amazon to load balance Instance-3 and Instance-4 This is what I have in mind. I could be way off so please bear with me. Also I have not taken into account the case of scaling MySql server as I currently have no idea about how that will be done and whether or not it is necessary initially. I am aware that Amazon provides auto scaling and mysql scaling as well but I dont want to get into that right now. Your feedback is appreciated Thanks

    Read the article

  • disk write cache buffer and separate power supply

    - by HugoRune
    Windows has a setting to turn off the write-cache buffer (see image) Turn off Windows write-cache buffer flushing on the device To prevent data loss, do not select this check box unless the device has a separate power supply that allows the device to flush its buffer in case of power failure. Is it feasible and economical to get such a "separate power supply" for the internal sata drives of a non-server PC? Under what name is such a power supply sold? I know that there are UPS devices that can be connected to external drives,but what is required to be able to switch this setting safely on for an internal disk? The setting has different descriptions in different version of windows Windows XP: Enable write caching on the disk This setting enables write caching in Windows to improve disk performance, but a power outage or equipment failure might result in data loss or corruption. Windows Server 2003: Enable write caching on the disk Recommended only for disks with a backup power supply. This setting further improves disk performance, but it also increases the risk of data loss if the disk loses power. Windows Vista: Enable advanced performance Recommended only for disks with a backup power supply. This setting further improves disk performance, but it also increases the risk of data loss if the disk loses power. Windows 7 and 8: Turn off Windows write-cache buffer flushing on the device To prevent data loss, do not select this check box unless the device has a separate power supply that allows the device to flush its buffer in case of power failure. This article by Raymond Chen has some more detailed information about what the setting does.

    Read the article

  • ssh Password-less login to multiple machines when you already have one

    - by tandu
    I'm a little bit confused about setting up a password-less login for multiple machines to begin with, but I think I could do it from scratch. The problem is I already have it set up for one machine and I don't want that to be blown away when I try to set it up for the other machine. Let's clarify: Machine A: the machine I'm connecting from Machine B: the machine I'm connecting to. Password required Machine C: the machine I'm connecting to. Password-less ssh I have read some tutorials on setting up password-less ssh to a certain site, but they usually start with "move id_rsa out of the way so it doesn't get blown away," but then at the end of the tutorial it's not moved back. If I had no help at all, here is what I would do: Log into B ssh-keygen -t rsa -f ~/id_rsa.other scp id_rsa.other.pub A:~/.ssh echo "Host A \n Identity File ~/.ssh/id_rsa.other" > ~/.ssh/config (Note that I realize these commands may not be exactly correct, but this is just the idea). What I'm not quite clear on is if I need to update the config for A, B, or both. I'm fairly certain to do a password-less login from A to B, it is A that needs the public key .. but I also suppose I need B to use the correct id_rsa file for that public key. Finally, I don't want the password-less login for C to be affected at all .. it's using id_rsa. Am I going wrong anywhere?

    Read the article

  • initrd problem and Kernel panics after openSUSE 11.2 upgrade.

    - by unixbhaskar
    Once I have done the upgrade form openSUSE11.1 to openSUSE11.2 by doing this: zypper dup Now I tried to boot the system and it failed sync with VFS and kernel panic, so clearly a initrd problem . if I'm not mistaken. Now a bit of explanation about the problem: while upgrading it shows me the error updating initramfs( I forgot the exact error or might be warning).Oh yeah it shows some grub warning too. I have had been doing that from a chroot environment.. with all the required file mounted in proper place in the chroot environment. Now .after bit googling and painfully looking the susegeek.com forum and opensuse.org forum I have decided to recreate the initrd ...but the fellow called "mkinitrd" is real real crap as I hev been pointed out by few forum members. I tried to make an initrd image by myself, failed to do so .as it shows error that device not found( if I boot into suse live cd and mount the partition ) then I tried from the chrooted env and it says "there is no space left on the device" A bit bemused :( yeah most of you pointed it right may lack of knowledge of mine. Kindly suggest me and show me steps to do it correctly and get opensuse11.2 up and running. TIA

    Read the article

  • MS Word TOC that references # pages rather than page number

    - by buttonsrtoys
    We frequently need to write specifications in Word which require a TOC that refers to the total number of pages in a section, rather than the page number. E.g., Section No. Pages 01010 Summary of Work..............5 01025 Prices.......................2 01400 Quality Control..............1 01700 Contract Close Out...........2 A wrinkle is that each section is a separate file. To date, we've been writing or TOC by hand, which has introduced every error imaginable. Is there an MS feature that populates a TOC with page totals? If not, I've done a little VB in Office, so wouldn't be opposed to that route as need be, as long as it was usable by our low tech users. Related question - all the section files are in the same folder. It would be nice if the TOC loaded every file in a folder, rather than having to specify each one. Is this a feature of Word or would this require VB? We tried a master document with links to subdocuments, but since the number of section files ebbs and flows with each project, the approach required too much maintenance for our Wordophobes.

    Read the article

  • NFS on top of GFS2 - does it work?

    - by Matthew
    We're currently using a NoSQL derivative called Splunk to receive our data. The software supports something called "search head pooling" in which the job-dispatching engine is housed on several servers which share a common storage point. Originally our intention was to use a clustered filesystem like GFS2 because of low latency, stability, and ease of setup. We set up GFS2, and it's working with no issues. However when trying to run the software, it's trying to create lock files, and a bunch of other things that their support team can't quite explain. Ultimate feedback from them was that they only support NFS. Our network administration team heavily frowns on NFS (lack of stability, file lock issues, etc). So, I was thinking about the possibility of setting up NFS on each server in the cluster to act as a wedge layer between the GFS2 filesystem and the software. Basically configure each server to export the GFS2 filesystem's mountpoint via NFS, and then tell each server to connect to that NFS share. That way we aren't introducing any single-points-of-failure should a dedicated NFS server go down, but the vendor gets their "required" NFS share. I'm just brainstorming ways around, so please tear this apart :)

    Read the article

  • iPhone all day meeting request bug?

    - by RodH257
    We've come across a bit of a weird bug in the office. our office is closing for a week or so over christmas, and our admin staff sent a meeting request to everyone in the office to go from 5pm on the 23rd of December until we return to work at 8.30 on the 5th. However there was some confusion, as if you look at the image below, the same meeting request is showing up with different start times for some people. While most people get the 5pm date, for others it shows up as an all day event! Staff have been planning their activities for the 23rd only to find out that their calendar is wrong and they are required to work. With some investigation, we noticed that all of the people with the incorrect time own iPhones or iPads. So perhaps they accepted the meeting on their phones, and it has put the meeting in wrong? There are people with the correct one that have iPhones, but perhaps they are on ios4 still, or perhaps they didn't accept the meeting request on their phone. has anyone else come across this error at all? is there a fix?

    Read the article

  • Windows XP - Power surge on hub port

    - by Swift-Tuttle
    Hi, Since last few weeks I constantly get this error, as status bar balloon: Power Surge on Hub Port - A USB device has exceeded the power limits of its hub port. Due to this now I am unable to access any USB devices properly, they get disconnected intermittently. I did quite a few things to resolve this problem, firstly obviously through the Windows help. I even tried all the things told on the Microsoft website(which essentially says is to check and update the driver) but in vain. One suggestion, I found when I google'd was to disable the USB2 controller through the Device Manager and since at every startup the System configuration comes up complaining that it has been changed etc.(On that same site it is mentioned to ignore this message.) But after everything I still cant solve this problem. Any help is much appreciated. The system is installed with Windows XP service Pack 3 and all the updates till last month. Please let me know if any other hardware info is required. **UPDATE** My laptop is about 5 years old now, its an HP with Celeron 1.4G processor. Windows XP SP3 installed. All latest windows updates installed. 2 USB ports available. BIOS is HP 68DTD ver F.0A Do I need to update my BIOS from somewhere ? or is this a hardware problem altogether?

    Read the article

  • Upgrading to Java 7u65 breaks my Deployment Rule Set for Oracle applications

    - by Don Atreides
    My company uses an older version of an Oracle application that requires Java 6u45. Naturally we want to be secure, so we use a Deployment Rule Set to specify 6u45 for that internal application and let other applications use 7u60. Now that we're ready to upgrade the Java 7 half to 7u67, the Oracle application breaks with "Deployment Rule Set required version 1.6.0_45 not available." Of course it is available, it just can't find it for some reason. As a test, I specified that JavaTester.org should use 6u45 also and it works fine with no issues. But when I try to use the same configuration (7u67 and 6u45) against the Oracle application it fails every time. If I downgrade to 7u60, it works. 7u65 or higher, it breaks. The Oracle application hasn't changed so it must be something different in how 7u65+ is handling Deployment Rule Sets or pathing or something. I'm at a complete loss. ruleset.xml: <?xml version="1.0"?> -<ruleset version="1.0+"> -<rule> <id location="*.mycorp.com"/> <action version="1.6.0_45" permission="run"/> </rule> -<rule> <id location="http://javatester.org"/> <action version="1.6.0_45" permission="run"/> </rule> </ruleset>

    Read the article

  • Moving Images from Database to File System

    - by msarchet
    So currently in our system we have been storing image files in the database (SQL Express 2005). Unfortunately it wasn't perceived that this would reach the max database size allowed by the SQL Express License. So I have proposed a plan of storing the images in the file system and only indexing where the file is in the database. The plan is to save the root path in our OptionsTable as something like ImagesRoot and then only saving the actual imageID in the table, which is basically a FK from the PK of the record with the image. I have determined that it would be best to then split this down into sub-directories inside of the ImagesRoot based on every 1000 images so basically (ImagedID / 1000)\(ImageID % 1000) (e.g. ImageID is 1999 it would be in %ImageRoot%\1\999). I'm looking for any potential pitfalls of this system and any thing that could be improved as I am already receiving some resistance from the owner of the company who wants everything to be in databases. Along those lines I would also take reasons why it should all be in databases. I should mention we have in place already automated backups that run for all of our customers databases and any files that are generated by our program that are required to be saved over a period of time These are optional but if someone isn't using our system it is expected that they are using their own or data loss isn't our problem (it is if our system fails and they are using it!). Thanks

    Read the article

  • Is it safe to force a dismount to format a volume in Windows?

    - by sammyg
    I am using format command in cmd to format a USB flash drive. M:\>format /FS:FAT32 /Q Required parameter missing - M:\>format M: /FS:FAT32 /Q Insert new disk for drive M: and press ENTER when ready... The type of the file system is FAT32. QuickFormatting 14999M Format cannot run because the volume is in use by another process. Format may run if this volume is dismounted first. ALL OPENED HANDLES TO THIS VOLUME WOULD THEN BE INVALID. Would you like to force a dismount on this volume? (Y/N) y Volume dismounted. All opened handles to this volume are now invalid. Initializing the File Allocation Table (FAT)... Volume label (11 characters, ENTER for none)? Format complete. 14,6 GB total disk space. 14,6 GB are available. 8 192 bytes in each allocation unit. 1 917 823 allocation units available on disk. 32 bits in each FAT entry. Volume Serial Number is E00B-2739 M:\> Is it safe to force a dismount like this, and make the handles invalid?

    Read the article

  • Bypass network stack. Which options do we have? Pros and cons of each option [on hold]

    - by javapowered
    I'm writing trading application. I want to bypass network stack in Linux but I don't know how this can be done. I'm looking for complete list of options with pros and cons of each of them. The only option I know - is to buy solarflare network card which supports OpenOnLoad. What other options should I consider and what is pros and cons of each of them? Well the question is pretty simple - what is the best way to bypass network stack? upd: OpenOnload It achieves performance improvements in part by performing network processing at user-level, bypassing the OS kernel entirely on the data path. Intel DDIO to allow Intel® Ethernet Controllers and adapters to talk directly with the processor cache of the Intel® Xeon® processor E5. What's key difference between these techologies? Do they do roughly the same things? I much better like Intel DDIO because it's much easy to use, but OpenOnload required a lot of installation and tuning. If good OpenOnload application is much faster than good Intel DDIO application?

    Read the article

  • Is it possible to create a simple frontend indexer for openbittorent torrents?

    - by SimonK
    I run a website which distributes a few files every now and again, live music performances by a rock band. I create a torrent file, set the trackers as openbittorrent, publicbt and other similar open trackers. I upload the torrent file to my forum, my users download it and the files are shared. No problems there. What I would like to do is index those torrents properly on my website though so I can follow seeders/leechers and other stats online. I know the open torrent trackers don't have an index but I am aware of many, many indexing sites that do that exact thing. I don't know how though. So what I'm asking is what do I need to do to do that myself? I simply want to create a page that lists the torrents I and other users on my site create, the seeders/leechers ratio and a link to the torrent file etc. What data do I need to be able to do that? I'm proficient in general web design but I don't know what I would need data wise to pull the required info on the torrents? Thanks

    Read the article

  • credit or minclass does not work well with pam_cracklib.so in common-password (opeSuSe 11.3)

    - by Mario
    I'm trying to implement password complexities on my pdc. It's a samba PDC with openLDAP backend. I tried cracklib-check but it looks like that I should have a decent and localize version of password library since the library out there usually comes in english. I also have another consideration that we will allow users to use any kind of password - even though it's dictionary based - as long as their passwords integrated with low/upper alphabet, digits, and other characters such as '$' or '_' (pam_cracklib.so calls them as classes). So here is my /etc/pam.d/common-password: #password requisite pam_pwcheck.so nullok cracklib password requisite pam_cracklib.so minclass=4 reject_username ##password requisite pam_cracklib.so \ ## dcredit=-1 ucredit=-1 lcredit=-1 ocredit=-1 reject_username password optional pam_gnome_keyring.so use_autht_ok password required pam_unix2.so use_authtok nullok The first commented line (with #) was the default configuration of openSuse 11.3. The 2nd/3rd (with leading ##) is another configuration I use when minclass=4 line is commented out. By the way, I have 'check password script' = /usr/local/sbin/crackcheck -d /usr/share/cracklib/pw_dict and passdb backend = ldapsam:ldap://127.0.0.1 parameters in smb.conf and cracklib-check works fine too. So here is the test I conduct. I logon to windows and then change my password. Sometimes it works fine that it trows error message - which what I wanted, but simple password with only lower alphabets can pass windows change password. Maybe I should make a new library which incorporates local vocabularies, but a guy out there (raise your hand please if you read this :) ) also experienced the same trouble with english word. Besides, what we really want is to let user to choose 2 or 3 format password out of 4 classes. Is there a bug or something with pam module in openSuse 11.3? Thank you in advance. Regards, Mario

    Read the article

< Previous Page | 493 494 495 496 497 498 499 500 501 502 503 504  | Next Page >