Search Results

Search found 27336 results on 1094 pages for 'network state'.

Page 498/1094 | < Previous Page | 494 495 496 497 498 499 500 501 502 503 504 505  | Next Page >

  • VirtualBox Issue: virtualbox changed my Computer Name's ip address in Windows

    - by suud
    I had installed virtualbox 4.2.2 in Windows 7. My Computer Name is: MY-PC My IP address (using ipconfig /all command) is: 192.168.1.101 My IP is dynamic and I set DNS to google dns (8.8.8.8) When I ping MY-PC, I got this result: Pinging MY-PC [192.168.56.1] with 32 bytes of data: Reply from 192.168.56.1: bytes=32 time<1ms TTL=128 Reply from 192.168.56.1: bytes=32 time<1ms TTL=128 Reply from 192.168.56.1: bytes=32 time<1ms TTL=128 Reply from 192.168.56.1: bytes=32 time<1ms TTL=128 My virtualbox was not running and I expected the ip adress of MY-PC is 192.168.1.101, not 192.168.56.1 Then I run command: nbtstat -a MY-PC and I got this result: VirtualBox Host-Only Network: Node IpAddress: [192.168.56.1] Scope Id: [] NetBIOS Remote Machine Name Table Name Type Status --------------------------------------------- MY-PC <00> UNIQUE Registered WORKGROUP <00> GROUP Registered MY-PC <20> UNIQUE Registered MAC Address = 08-00-27-00-60-B3 Local Area Connection: Node IpAddress: [0.0.0.0] Scope Id: [] Host not found. Wireless Network Connection: Node IpAddress: [192.168.1.101] Scope Id: [] NetBIOS Remote Machine Name Table Name Type Status --------------------------------------------- MY-PC <00> UNIQUE Registered WORKGROUP <00> GROUP Registered MY-PC <20> UNIQUE Registered MAC Address = 94-0C-6D-E5-6D-5D So it seems virtualbox caused this problem. I want to know how to change back my Computer Name's ip address to 192.168.1.101 (or any ip address that set by my internet connection)?

    Read the article

  • OpenSolaris / Nexenta problems with NetXen 4-port NIC card (ntxn driver)

    - by ewwhite
    Hello, I'm running NexentaStor Enterprise on an HP ProLiant DL180 G6 server. The onboard NIC interfaces surface as igb0 and igb1 and work well. However, I've added an HP NC375T 4-port network card using the NetXen 3031 chipset. This card should be handled by the ntxn driver in the SUNWntxn package, but that results in "ntxn0: failed to map doorbell" messages upon boot. The network interfaces don't show up. After some research, I found HP's driver package for the card. The release notes for the driver package state: This version of the Driver is supported only on Oracle Solaris 10 5/09 & 10/09. Oracle Solaris 10 5/09 & 10/09 contain an older version of NetXen P3 driver package called SUNWntxn. So, adding another version of NetXen P3 driver package using pkgadd command might result in conflicts with the NetXen driver binary & related files. Users are advised to uninstall native SUNWntxn driver package before installing the new package. The install completes, but I end up with a different set of errors in initializing the card. ifconfig ntxn0 plumb ifconfig: cannot open link "ntxn0": DLPI link does not exist dmesg output: Jan 29 07:20:17 ch-san2 ntxn: [ID 977263 kern.warning] WARNING: Memory not available Jan 29 07:20:17 ch-san2 ntxn: [ID 404858 kern.notice] NOTICE: ntxn0: Mac registration error Trying to manually create the device files: root@ch-san2:/volumes# add_drv -i "4040,100" ntxn ("ntxn") already in use as a driver or alias. Update the driver: root@ch-san2:/volumes# update_drv -f ntxn devfsadm: driver failed to attach: ntxn Warning: Driver (ntxn) successfully added to system but failed to attach Any ideas on how to get this driver working, or should I ditch the card and go with an Intel or something else?

    Read the article

  • windows firewall broken on server 2008

    - by Chloraphil
    This evening I tried to rdp into my server 2008 box and was unable to. After poking around some I discovered that something is awry with my Windows Firewall. I did install 5 windows updates remotely earlier today but rolled those back in an attempt to see if that fixed the problem but had no luck. Symptoms: cannot rdp to machine (including from itself) cannot ping machine cannot connect to file share on machine error message when attempting to open "windows firewall with advanced security" snap-in (there was an error opening the windows firewall with advanced security snap-in ... The Windows Firewall with Advanced Security snap-in failed to load. Restart the windows firewall service on the computer that you are managing. Error code: 0x6D9. When I opened the "user-friendly" Windows Firewall it failed to load most of the gui elements, meaning, the title bar with close, minimize, and maximize buttons is present, the rest of the window has a white background with a yellow rectangle with rounded corners and a yellow triangle w/ an exclamation point is in the upper right. hope that made sense "Windows Firewall" does not appear in the list of services I ran a virus scan that found nothing. How do I fix the firewall and hopefully restore the ability to rdp? EDIT: Added at fission's request: c:\sc query mpsdrv SERVICE_NAME: mpsdrv TYPE : 1 KERNEL_DRIVER STATE : 4 RUNNING (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 c:\sc query mpssvc SERVICE_NAME: mpssvc TYPE : 20 WIN32_SHARE_PROCESS STATE : 1 STOPPED WIN32_EXIT_CODE : 1068 (0x42c) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 Those two registry keys do exist: HKLM\SYSTEM\CurrentControlSet\Services\mpsdrv & HKLM\SYSTEM\CurrentControlSet\Services\MpsSvc ! The problem seems to be with the Base Filtering Engine, when I try to start it I get the following error: Windows could not start the Base Filtering Engine service on MYCOMPUTER. Error 15100: The resource loader failed to find MUI file. EDIT2: I ran sfc /scannow and i found about 100 occurrences of "[SR] Cannot repair member file"... including several related to the firewall (ex: [l:32{16}]"Firewall.cpl.mui" of Networking-MPSSVC.Resources...). One of them mentioned wordpad.exe, which I tried to open, and it failed. I found here mentions of mounting the install.wim on the install media to copy the affected files over. I am downloading the appropriate AIK and will continue tomorrow evening.

    Read the article

  • cant install fastcgi ubuntu server: Package libapache2-mod-fastcgi is not available

    - by BlueDragon
    When i try to install fastcgi in ubuntu server 12.04 I get the following error: sudo apt-get install libapache2-mod-fastcgi Reading package lists... Done Building dependency tree Reading state information... Done Package libapache2-mod-fastcgi is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package 'libapache2-mod-fastcgi' has no installation candidate Any solution?

    Read the article

  • All paths down on vSphere esxi 5.1, LSI 9211-8i

    - by user1434058
    Works 100% ESXi 5.1 HBA (LSI 1064e) 1x SAS2 100GB SSD Doesn't work ESXi 5.1 HBA (LSI 9211-8i IT /IBM M1015) 1x SAS2 100GB SSD After a few hours of heavy HD load i get: - Device or filesystem with identifier ['all drives'] has entered the All Paths Down state. - ESXi retries but loses connectivity to the SAS drive, marks it as "dead or error" - reboot fixes the issue How can i fix this issue?

    Read the article

  • Samba: share home directories when home directories are symbolic links

    - by Owen
    I have set up a new Ubuntu 9.10 system for five users. In the system is a large LVM volume where all the data is to be kept. The main system disk is not for this purpose, so I attempted to move the home directories using usermod -d /var/data/username -m And started creating my shares for these new home locations. But then I thought: hey, Samba has built-in home directory sharing! So I enabled that, and it didn't work. The shares were not published to the network. Only the share for user 'owen' was published; his folder hadn't been moved. So I thought: maybe Samba home sharing only works for default home locations, so how about I move the home directories back to where they were, and then make them symlinks. root@boxenmkiv:/home# ls -l total 4 lrwxrwxrwx 1 brett brett 25 2010-04-03 08:48 brett -> /var/data/brett/ lrwxrwxrwx 1 carly carly 23 2010-04-03 08:48 carly -> /var/data/carly/ lrwxrwxrwx 1 dave dave 21 2010-04-03 08:48 dave -> /var/data/dave/ lrwxrwxrwx 1 kate kate 23 2010-04-03 08:47 kate -> /var/data/kate/ drwxr-xr-x 4 owen owen 4096 2010-04-03 08:44 owen Like so. Still no go. The only users share which is published to the network is 'owen' who as you can see above has not had his home directory moved. I have also added the following to my smb.conf [global] follow symlinks = yes wide symlinks = yes unix extensions = no With no luck. Am I going about doing this the entirely wrong way? Should I just give up and manually create shares for the users? Thanks in advance.

    Read the article

  • Failed MDADM Array With Ext.4 Partition - "e2fsck: unable to set superblock flags on /dev/md0"

    - by Matthew Hodgkins
    Had a power failure and now my mdadm array is having problems. sudo mdadm -D /dev/md0 [hodge@hodge-fs ~]$ sudo mdadm -D /dev/md0 /dev/md0: Version : 0.90 Creation Time : Sun Apr 25 01:39:25 2010 Raid Level : raid5 Array Size : 8790815232 (8383.57 GiB 9001.79 GB) Used Dev Size : 1465135872 (1397.26 GiB 1500.30 GB) Raid Devices : 7 Total Devices : 7 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Sat Aug 7 19:10:28 2010 State : clean, degraded, recovering Active Devices : 6 Working Devices : 7 Failed Devices : 0 Spare Devices : 1 Layout : left-symmetric Chunk Size : 128K Rebuild Status : 10% complete UUID : 44a8f730:b9bea6ea:3a28392c:12b22235 (local to host hodge-fs) Events : 0.1307608 Number Major Minor RaidDevice State 0 8 81 0 active sync /dev/sdf1 1 8 97 1 active sync /dev/sdg1 2 8 113 2 active sync /dev/sdh1 3 8 65 3 active sync /dev/sde1 4 8 49 4 active sync /dev/sdd1 7 8 33 5 spare rebuilding /dev/sdc1 6 8 16 6 active sync /dev/sdb sudo mount -a [hodge@hodge-fs ~]$ sudo mount -a mount: wrong fs type, bad option, bad superblock on /dev/md0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so sudo fsck.ext4 /dev/md0 [hodge@hodge-fs ~]$ sudo fsck.ext4 /dev/md0 e2fsck 1.41.12 (17-May-2010) fsck.ext4: Group descriptors look bad... trying backup blocks... /dev/md0: recovering journal fsck.ext4: unable to set superblock flags on /dev/md0 sudo dumpe2fs /dev/md0 | grep -i superblock [hodge@hodge-fs ~]$ sudo dumpe2fs /dev/md0 | grep -i superblock dumpe2fs 1.41.12 (17-May-2010) Primary superblock at 0, Group descriptors at 1-524 Backup superblock at 32768, Group descriptors at 32769-33292 Backup superblock at 98304, Group descriptors at 98305-98828 Backup superblock at 163840, Group descriptors at 163841-164364 Backup superblock at 229376, Group descriptors at 229377-229900 Backup superblock at 294912, Group descriptors at 294913-295436 Backup superblock at 819200, Group descriptors at 819201-819724 Backup superblock at 884736, Group descriptors at 884737-885260 Backup superblock at 1605632, Group descriptors at 1605633-1606156 Backup superblock at 2654208, Group descriptors at 2654209-2654732 Backup superblock at 4096000, Group descriptors at 4096001-4096524 Backup superblock at 7962624, Group descriptors at 7962625-7963148 Backup superblock at 11239424, Group descriptors at 11239425-11239948 Backup superblock at 20480000, Group descriptors at 20480001-20480524 Backup superblock at 23887872, Group descriptors at 23887873-23888396 Backup superblock at 71663616, Group descriptors at 71663617-71664140 Backup superblock at 78675968, Group descriptors at 78675969-78676492 Backup superblock at 102400000, Group descriptors at 102400001-102400524 Backup superblock at 214990848, Group descriptors at 214990849-214991372 Backup superblock at 512000000, Group descriptors at 512000001-512000524 Backup superblock at 550731776, Group descriptors at 550731777-550732300 Backup superblock at 644972544, Group descriptors at 644972545-644973068 Backup superblock at 1934917632, Group descriptors at 1934917633-1934918156 sudo e2fsck -b 32768 /dev/md0 [hodge@hodge-fs ~]$ sudo e2fsck -b 32768 /dev/md0 e2fsck 1.41.12 (17-May-2010) /dev/md0: recovering journal e2fsck: unable to set superblock flags on /dev/md0 sudo dmesg | tail [hodge@hodge-fs ~]$ sudo dmesg | tail EXT4-fs (md0): ext4_check_descriptors: Checksum for group 0 failed (59837!=29115) EXT4-fs (md0): group descriptors corrupted! EXT4-fs (md0): ext4_check_descriptors: Checksum for group 0 failed (59837!=29115) EXT4-fs (md0): group descriptors corrupted! Please Help!!!

    Read the article

  • ubuntu 9.10 cups server cupsd.conf

    - by aaron
    i have a cups server running on ubuntu 9.10 on my home network. right now i can access it at 192.168.1.101:631, but when i try to access it at myservername.local:631 i get a 400 Bad Request. here's the relevant section from my current cupsd.conf: ServerName 192.168.1.101 # Only listen for connections from the local machine. Listen localhost:631 Listen /var/run/cups/cups.sock # any of the below 'Listen' directives all yield the same result Listen 192.168.1.101:631 #Listen *:631 #Listen myservername.local:631 # Show shared printers on the local network. Browsing On BrowseOrder allow,deny BrowseAllow all BrowseLocalProtocols CUPS dnssd BrowseAddress 192.168.1.255 # Default authentication type, when authentication is required... DefaultAuthType Basic # Restrict access to the server... <Location /> Order deny,allow Deny from All Allow from 127.0.0.1 Allow from 192.168.1.* </Location> # Restrict access to the admin pages... <Location /admin> Order deny,allow Deny from All #Allow from 127.0.0.1 #Allow from 192.168.1.* </Location> # Restrict access to configuration files... <Location /admin/conf> AuthType Default Require user @SYSTEM Order deny,allow Deny from All #Allow from 127.0.0.1 #Allow from 192.168.1.* </Location> i get the following in /var/log/cups/error_log: E [03/Jan/2010:18:33:41 -0600] Request from "192.168.1.100" using invalid Host: field "myservername.local:631" what do i need to do to be able to access the cups server at both 192.168.1.101:631 and myservername.local:631?

    Read the article

  • Cisco ASA Act as a Hardware Security Module?

    - by Derek
    Hello, We have a partner that is requiring us to get a HSM for a web application that we host for them. This is something new for us, we've always installed our SSL certificates on our web servers and never needed a hardware device. We currently have 2 Cisco ASA 5510 firewalls in an active/standby configuration. Both ASAs have a ASA-SSM-10 security module installed in them. The web application is a standard HTTPS webpage with no authentication required. I was wondering if we could use our Cisco ASAs to meet this requirement or if we'll have to buy another device. I was doing some searching and read about Cisco's clientless webvpn feature. It sounds like it might work, but I'm not sure. We basically want the ASA to handle the SSL and proxy the connection to our web servers. We do not want to prompt for a username or password to connect or show any portals, just display the web page. If the ASA cannot do this, does any one have any recommendations for network attached hardware security modules? We are using VMware vCenter, so we'd rather have an external device attached to the network, rather than buying HSM cards for every ESXi host. Thanks, Derek

    Read the article

  • Move sendmail from Fedora 1 to a different server ( fedora 12)

    - by tanieboy4u
    We have a sendmail server that also works as DHCP, DNS, and a gateway to our ISP. It has three network interfaces, one for our ISP ( static IP) and the other two is for LANS on different subnet. The hardware is quite old and we've been experiencing downtime due to hardware failures, so we have decided to upgrade the hardware and while at it upgrade the linux OS to Fedora 12. Were trying to do this with minimal downtime. We are planning to take these steps. Install New OS (Fedora 12) on the new server with 3 network interfaces. Install DHCP, BIND, Sendmail, SpamAssassin, MailScanner, Dovecot, Squirrelmail on the new server. Transfer settings from the old server to the new server. ( This is the hardest part that we know). For DHCP and DNS, we can just copy the dhcp leases and conf file and everything should work right? How do we go about moving the users/email accounts from the old server to the new one? Thanks for all your help!

    Read the article

  • AirPort Express Discoverability

    - by andybjackson
    I bought an AirPort Express to enable music in a different part of a friend's house using the AirTunes feature. Unfortunately, iTunes or the AirPort Utility don't reliably discover the existence of the device. If I use the "Configure Other..." function within the AirPort Utility and enter the AirPort Express' IP address and password, then I can reliably get access in a daughter window to configure it. This seems to nudge the underlying AirPort Utility into "finding" and displaying the AirPort Express, which it doesn't do on its own even after clicking the "Rescan" button. iTunes then also seems to cotton on to this discovery and present the AiportExpress as an AirTunes option at the bottom right of iTunes. Things then works as we'd like them to. If I close down the AirPort Utility, then iTunes loses the AirPort Express AirTunes speaker, often giving "An unkown error (-15006) occurred while connecting to the remote speaker". Of course, starting the Airport Utility, forcing it to recognise the Airport Express and then starting iTunes, isn't the ease of use I was after. Background info: iTunes is running on Windows XP. The AirPort Express is running in wireless client mode (i.e. is connecting to an unsecured wireless network in the house with nothing connected to its ethernet port). The network router is a Swisscom Motorola 3347NWG (with firmware 7.8.5r1). I have already tried: Disabling the Windows XP firewall Updating the AirPort Express firmware, the AirPort Utility and the router firmware Ensuring Wireless privacy and similar potetnially problematic router settings are off Solutions, or even just ideas of other things to try would be gratefully received.

    Read the article

  • Cisco Spam Blocker, Iron Port, Lotus Domino, Integration Help

    - by NickToyota
    Hi serverfault universe, I work for a medium sized (roughly 200 user) company. We are attempting to intagrate our new Cisco Spam Video Blocker (ironport) device into our network so that it acts as an incoming filter then passes it off to our Lotus domino mail server. And also vise versa. The way our network is setup currently has an mx record pointing to our Domino mail SMTP incoming server which is currently setup to be an inbound gateway and filter (using symantec domino mail software). We want to replace the inbound gateway with the ironport. Our company has also invested in a pool of external IP addresses which I believe has been currently assigned to our web, email, servers. What would the proper course of action be to successfully integrate the device be? Mx record change? Replace the domino gateway completely with the ironport? We attempted to set the ironport device to the external IP of what our mx record is pointing to without much success. Any help on proper setup would be greatly appreciated.

    Read the article

  • Ubuntu Server running VNC

    - by xwapilot
    I have access to four computers: 1 Ubuntu Server desktop (Version 10.04) 1 Mac Mini (Snow Leopard) 1 Windows desktop (Windows 7) 1 Windows laptop (Windows Vista) The first three will always be on the home network. My goal is to SSH from the laptop into the server and be able, through VNC (or another remote desktop software), to control the windows and mac computers. The goal of this would be a slightly heightened network security over using VNC to directly access the mac or windows desktop. I have successfully used SSH to connect to the server, but have not been able to successfully implement the remote desktop connection. I would appreciate help doing so. Here's what I've done so far: As per instructions here: http://www.stuartellis.eu/articles/vnc-on-linux/ I installed the following: vnc4server – the main VNC server software vnc-java – enables access from Web browsers with Java support xvnc4viewer – a basic VNC viewer I then set up a password using the vncpasswd command. To attempt to connect to the mac, I followed directions I found in a thread at superuser. com and went to "System PreferencesSharing" and enabled "Screen Sharing". Subsequently, I tried entering the following commands into Ubuntu: vncviewer mac_ip_address::5904 vncviewer mac_ip_address:0 vncviewer mac_ip_address:1 They all returned the following: VNC Viewer Free Edition 4.1.1 for X - built Apr 9 2010 18:41:55 Copyright (C) 2002-2005 RealVNC Ltd. See http ://www .realvnc. com for information on VNC. vncviewer: unable to open display "" I'm sure I'm missing something important, but I'm not sure what it is. Do I need to have a GUI installed, or did that come with the vnc packages I installed?

    Read the article

  • VLAN support on Juniper EX - 2200 switches

    - by liv2hak
    I have 6 Juniper switches (EX - 2200) connected to each other as shown in the network topology below. I have two PC's that I am using PC1 - (used for configuring the 6 switches via minicom) PC2 - to monitor the traffic between the switches via the Ports that are marked with arrows in the diagram. STEP 1: I create a new vlan On Switch 3 (SW3) that includes Port 12 and Port 22. I also assign l3-interface to the vlan (vlan_2) with ip address - 192.168.1.7. Now I plug-in Port 0 of Switch 3 on PC2. Now I try pinging 192.168.1.7 from PC2 (192.168.1.10) I want to know what will happen? My postulation is that I will not be able to ping SW3 from PC2.This is because SW3 (Port 12 and Port 22) is a part of a vlan_2 and vlan_2 logically breaks up broadcast domains and so 192.168.1.7 will not be reachable from 192.168.1.10. Now I have an l3-interface on SW1 with IP 192.168.1.1 using default vlan( vlan-id 0). Similarly I have enabled IP on SW2 - 192.168.1.2 SW3 - 192.168.1.3 SW4 - 192.168.1.4 SW5 - 192.168.1.5 SW6 - 192.168.1.6 all using default vlan. Now I plug in Port 12 of SW3 (blue cable) into the PC2. I try to ping 192.168.1.1 from PC2. What will happen at this stage.? My postulation is that I will be able to ping switch 1.Is this correct? Also another question is that can a single port on a Switch be added multiple VLANS? I am a beginner at network configuration? Any help would be highly appreciated. (Please ignore the CISCO symbol on the switches in the diagram.All swithes are Junper EX 22-00.)

    Read the article

  • How to securely enable file sharing over PPTP on Windows 2008 Server

    - by Damage
    I have set up a Windows SBS 2003 domain (LAN) and a stand-alone Windows 2008 Server (web server) at another location (workgroup). I established PPTP VPN connection (SBS dials web server) over which users from LAN should be able to access web server. On web server I enabled TCP/IPv4 and File and Printer sharing protocol. It has a few external addresses (one of them is default) AND one local address (192.x.x.x) assigned to network adapter. Firewall allows port 445 for file sharing. There's the problem - I can not enable web server file shares to be visible to LAN users and ONLY to LAN users: From SBS I can access webserver but I cannot access webserver from LAN workstations (XP, Vista). I have had same configuration - I have just replaced old (web server) Windows 2003 server with 2008 so SBS settings are the same (static route, DNS etc.). How can I enable file sharing on web server for LAN workstations? Now I have opened File and printer sharing to the internet which is of course totaly unsecure. I tried to secure the tunnel so I moved RAS (VPN) connection (Network Center) on web server to "Private" profile and moved firewall port 445 to "Private" profile but suddenly file sharing does not work and I cannot telnet webserver on port 445. How can I secure file sharing so I do not have to open it to the internet?

    Read the article

  • Reverse proxy for mailserver (SMTP + HTTP for web client)

    - by gaqzi
    I'm looking at doing some reverse proxy work for a mail server with corresponding web client. Both servers are running on the same machine, this is not a server with a high load. :) The solution I've discussed with friends is having the mail server/web client on our internal network. Then to put a reverse proxy on the DMZ to service both SMTP and web client HTTP-traffic to the mail server on the internal network. From what I understand this is the recommended secure solution? So far I've thought for the SMTP-proxy part of using postfix which will receive mail, do some spamhause and similar anti-spam measures and if it all checks out, send the mail to the mail server on the inside. The mail server on the inside will send all outgoing mail to the proxy which will then send it out on the Internet. For the web client I'm not sure exactly which software I should be running on the proxy machine, I've been thinking about using Squid -- but that's basically based on the fact that I know squid is a http proxy. The web client data will be sent out over SSL. Reading around some here on Serverfault I've seen other people using Apache with mod_proxy+mod_security for similar situations. Am I thinking correctly for this solution? What software would you guys use and with which modules? Thanks in advance for the help! :)

    Read the article

  • Cisco ASA intermittently fails to see traffic

    - by DrStalker
    users | Mikrotik -- Internet | ASA | ServerA and ServerB I'm trying to troubleshoot a problem with a new Cisco ASA 5505. The network design is as above - the Microtik is the existing router, ServerA and ServerB used to plug directly into it. ServerA has IP 10.30.1.10, ServerB has IP 10.30.1.11 The ASA is configured with no NAT, a "allow anything" firewall, and uses the microtik as its default gateway. In effect, it is currently a simple IP router; the firewall and VPN stuff will all come later once the basics are working. Th problem is access to ServerA and ServerB is erratic - sometimes it will work, sometimes it will fail. It can fail for either one of the servers only, or both. When it is working: The Mikrotik logs show ping packets being sent out over the proper interface The ASA logs show the incoming connections. When it is failing: The Mikrotik logs show ping packets being sent out over the proper interface The ASA logs show nothing reaching the ASA. This can fail for one server only (e.g.: the Mikrotik is putting out packets to 10.30.1.10 and 10.30.1.11, but the ASA is only seeing packets arrive destined for 10.30.1.11) It can fail for one source only (e.g.: ClientA on the users network can ping 10.30.1.11, but clientB cannot) The problem can also be seen from the mikrotik router itself; sometimes it can ping ServerA and ServerB, sometimes it can only ping one of them What could be causing this? I can't think of any possible cause that is intermittent and could explain why the problem may occur for one destination server and not others. edit: Link to ASA config

    Read the article

  • Printer sharing problem (win7 / WinXP): Canon pixma USB printer

    - by Rabarberski
    For a friend, I am trying to share a USB Canon pixma ip3000 printer between two computers in his home network. But I can't get it to work due tot a Canon driver problem. The printer is connected to the Windows 7 (64 bit) computer, and we would like to be able to print from a Windows XP computer. 'Normally' it should be no problem to use Windows printer sharing, however, because one machine is 32-bit and the other is 64-bit, installing an extra driver is required. T he driver provided by canon (here) is described as a 'Canon Inkjet Printer Driver Add-On Module'. The problem is that the .inf file contained in the .exe file isn't accepted as a driver when prompted by the Printer Sharing Wizard, I suspect because it is an add-on driver (whatever that may be). I've connected and installed the printer locally on the XP machine first (which works), so that the XP machine would already know the driver when using it as a network printer, but that doesn't work; the wizard still wants a driver file. Anybody suggestions how to get this working? Maybe there is some sort of generic driver (would be OK even with limited functionality)?

    Read the article

  • Error trying to get tmux 1.6 installed - E: Unable to locate package libevent

    - by Michael Durrant
    $ pwd $ /home/durrantm/Downloads/tmux-1.6 durrantm.../tmux-1.6$ ./configure && make checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes ... ... configure: error: "libevent not found" durrantm.../tmux-1.6$ sudo apt-get install libevent Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package libevent

    Read the article

  • Dell Management Packs in System Center Operations Manager 2007 R2?

    - by bwerks
    Hey all, I recently set up SCOM in a small business network environment. The root management server is a Dell Poweredge 2950, and I'd like to use SCOM to monitor it using Dell's management packs. I've imported the management packs into the SCOM deployment and followed Dell's installation instructions, but it doesn't seem to be fully working yet. Currently, the Diagram views in the Dell tree (Monitoring tab) seem to show me the server's place in the network topology, so it seems that at least part of it is working. However, none of the reports under "Performance and Power Monitoring Views" provide any information. When clicking on one of them (Power Consumption (Watts), for instance), the display area is blank and there is a tooltip visible that reads "No performance counter is selected. To select a counter, place a check mark in the Show column in legend below." However, in the legend, there's nothing there for me to check. I've installed OpenManage 6.2 on the server as per the Dell documentation, but I don't know what else I could have done that I missed. Does this sound like a familiar problem to anyone?

    Read the article

  • Exchange 2007 restore - Backup Exec Unable to Attach to a resource

    - by Andy
    I have been struggling with this one for months! Grateful for any advice. The setup is a windows 2003 server network, 4xservers on the domain. Two exchange 2007 servers (only one with mailboxes still on). Backup Exec (12.5) on a non-exchange server with agents on the others. Backup exec runs a full backup of exchange across the network well, at pretty reasonable speeds. However, when you try any kind of restore (individual emails, mailboxes or whole system restore - all to same location or to alternate server, RSG etc) the following message is received within about 10-15 secs of starting the job: Job ended: 24 December 2010 at 13:28:32 Completed status: Failed Final error: 0xe000848c - Unable to attach to a resource. Make sure that all selected resources exist and are online, and then try again. If the server or resource no longer exists, remove it from the selection list. Edit the selection list properties, click the View Selection Details tab, and then remove the resource. Final error category: Resource Errors For additional information regarding this error refer to link V-79-57344-33932 Things I have already tried: Changed account to main administrator account (with all permissions) checked versions of ese.dll on both servers - both the same Checked all VSS writers on both servers are stable / normal restoring to different locations Any advice anyone could give would be much appreciated. Many thanks, Andy

    Read the article

  • Zimbra MTA settings

    - by user192702
    Hi have some questions for Zimbra v8.0.6GA. Under Configure - MTA - Network, I'm seeing a few settings and am not very clear what to do with them. Web mail MTA Host name Is this for delivering local mail only (ie not for external mails)? According to this link, it says the following. That's a mouthful but what is "composed messages"? Is this for a multi server deployment where the Postfix server for Zimbra isn't installed on the same box that as the rest of the servers? Webmail MTA is used by the Zimbra server for composed messages and must be the location of the Postfix server in the Zimbra MTA. Relay MTA for external delivery My understanding after reading the doc is that if my ISP doesn't force me to relay outgoing mails through them, and I have enabled DNS lookup, I can leave this blank? Inbound SMTP host name Sorry I know this is explained as "If your MX records point to a spam-relay or any other external non-Zimbra server, enter the name of that server in the Inbound SMTP host name field." but I'm not following. Can someone provide an example? MTA Trusted Networks The admin doc says "To set up MTA trusted networks on a per server basis, make sure that MTA trusted networks have been set up as global settings and then go the Configure Servers MTA page and in the MTA Trusted Networks field enter the trusted network addresses for the server." However I see out of the box it has default networks setup for the server whereas on a global level it's blank. Does this mean there is a bug with the install software and I have to copy the setting from the server to the global setting?

    Read the article

  • Address (url) forwarding with Vyatta

    - by Trikks
    Hi Got this kind of noob question i suppose. I got this very basic network setup and need help to set up some address forwarding. As seen in my illustration below all traffic enters via the eth0 interface (85.123.32.23). The external dns is setup to direct all hosts to this ip as well. Now, how on earth do I filter the incoming requests to each box? The Ip's are static! Se the network layout here: http://vyatta.org/files/u11160/setup.png I do not wish to solve this by assigning tons of ports etc. In my wishful thinking something like this would be nice :) set service nat rule 10 type destination set service nat rule 10 inbound-interface eth0 set service nat rule 10 destination address ftp.myhost.com set service nat rule 10 inside-address address 192.168.100.20 This way ALL traffic to the address ftp.myhost.com (at eth0) should be routed to the internal ip, 192.168.100.20. Right, is there anyone who could point in some direction? Maybe it's wrong to use nat? Please help me! :)

    Read the article

  • Remote Desktop to Server 2008R2 fails from one particular Win7 client

    - by Jesse McGrew
    I have a VPS running Windows Web Server 2008 R2. I'm able to connect using Remote Desktop from my home PC (Windows 7), personal laptop (Windows 7), and work laptop (Windows XP). However, I cannot connect from my work PC (Windows 7). I receive the error "The logon attempt failed" in the RDP client, and the server event log shows "An account failed to log on" with this explanation: Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: username Account Domain: hostname Failure Information: Failure Reason: Unknown user name or bad password. Status: 0xc000006d Sub Status: 0xc0000064 Process Information: Caller Process ID: 0x0 Caller Process Name: - Network Information: Workstation Name: JESSE-PC Source Network Address: - Source Port: - Detailed Authentication Information: Logon Process: NtLmSsp Authentication Package: NTLM Transited Services: - Package Name (NTLM only): - Key Length: 0 I can connect from the offending work PC if I start up Windows XP Mode and use the RDP client inside that. The server is part of a domain but my account is local, so I'm logging in using a username of the form hostname\username. None of the clients are part of a domain. The server uses a self-signed certificate, and connecting from home I get a warning about that, but connecting from work I just get the logon error.

    Read the article

< Previous Page | 494 495 496 497 498 499 500 501 502 503 504 505  | Next Page >