Search Results

Search found 176 results on 8 pages for 'dongle'.

Page 5/8 | < Previous Page | 1 2 3 4 5 6 7 8  | Next Page >

• Bluetooth not seeing mouse (Fedora)

  - by Chris

  I have a Lenovo S10 'netbook' that I've installed Fedora 17 ("LXDE spin") on. So far pretty much everything works great, except, the on-board Bluetooth. lsusb shows the controller present (0a5c:2101 Broadcom Corp. Bluetooth Controller), hcitool dev shows hci0 present, but when I put my mouse ("Lenovo Bluetooth Laser Mouse," which works perfectly paired with a MacBook Pro, MacBook Air, Mac mini, and Lenovo SL500 (with a USB dongle; running Windows 7)) into pairing mode and run hcitool scan (reports "Scanning ..." and, without further information or error message, returns to the shell prompt), blueman-manager, or bluetooth-wizard (from the gnome-bluetooth package) and try to detect the mouse, I get nothing... Frustrating! Thanks anyone who can point me in the right direction!

  Read the article

• Wired network on computer to wifi

  - by user329592

  I just got myself a wifi capable cell phone, but I dont have a wireless internet at home. I do have a wired unlimited internet connection on my computer, and I wonder whether there is any gadget that I can plug into my computer (maybe at the usb port?) with which I can turn my computer into a wifi access point? I mean, a dongle or something which will enable me to connect my phone to my computer's internet through wi-fi? Also, I dont know anything about networking, so would it be hard for me to set up a secure wifi point? Thank you for reading this question through. Hope I can buy some sort of adapter which is comparitively cheap.

  Read the article

• Linux Bluetooth [closed]

  - by Chris

  Not sure if this is the proper forum; please forgive me if it's not... I have a Lenovo S10 'netbook' that I've installed Fedora 17 ("LXDE spin") on. So far pretty much everything works great, except, the on-board Bluetooth. lsusb shows the controller present (0a5c:2101 Broadcom Corp. Bluetooth Controller), hcitool dev shows hci0 present, but when I put my mouse ("Lenovo Bluetooth Laser Mouse," which works perfectly paired with a MacBook Pro, MacBook Air, Mac mini, and Lenovo SL500 (with a USB dongle; running Windows 7)) into pairing mode and run either hcitool scan (reports "Scanning ..." and, without further information or error message, returns to the shell prompt) or bluetooth-wizard (from the gnome-bluetooth package) and try to detect the mouse, I get nothing... Frustrating! Thanks anyone who can point me in the right direction!

  Read the article

• External hard drive encryption

  - by Kragen

  I've got a complete backup of my main PC on 1.5 TB external hard drive that I carry around with my laptop so I can have access to all of my files while I'm on the move, however it has just dawned on me that if someone nicks my external hard drive they now have access to everything! Hence I'm looking for a way to encrypt my external hard drive. I'm after something that is: Secure (if I need to carry around a USB dongle to keep the key on so be it) Fast (the performance of the drive should still be reasonable) Cross-platform (I regularly use other peoples computers - Sometimes they are not windows based and might not even have internet access, however I still want to be able to access my files) Cheap (preferably free / open source!)

  Read the article

• Best wireless mouse/keyboard for conference room computer?

  - by Brett

  What would be the best wireless mouse and keyboard for a conference room computer that is used by multiple employees throughout the day? We have one in there right now that is really cheap that doesn't work half the time. This is due to the fact that the batteries run down when left on... and it seems to have problems losing its pairing with the computer dongle. Any ideas on something that won't have battery problems, is very reliable and somewhat tough? Price isn't too much of an issue, but I'd still prefer to get something for less than $100 just in case someone walks away with it.

  Read the article

• external SCSI tape drive DAT 72 problem Solaris 10

  - by Hassan

  Hi all, I have solaris 10 sparc running and working very well but i have problem with external SCSI tape drive DAT 72 problem it seems to me the tape drive is manufactured by SUN microsystems when i ran mt -f /dev/rmt/0 status it reveals the following output bash-3.00# mt -f /dev/rmt/0 status /dev/rmt/0: No such file or directory when i ran ls -l it reveals the following output ls -l /dev/rmt/0 lrwxrwxrwx 1 root root 43 Sep 20 2006 /dev/rmt/0 -> ../../devices/pci@8,600000/scsi@1,1/st@3,0: it seems to me everything is okay SCSI cable is connected properly to Tape device and to server as well the tape has SCSI termination dongle as well and connected properly to Tape device as well any ideas would be a great assist Thanks in advance

  Read the article

• How to Connect Firewire Camcorder to Laptop without firewire port

  - by bdk

  I Have a Sony Camcorder w/ a 4-pin firewire output. I have HP laptop I want to use it with, but the laptop, does not have a firewire port, just VGA, HDMI, USB, ESATA, Ethernet, and Modem. In addition, It doesn't have a PC Card slot for adding a Firewire card. Googling for "Firewire to USB adapter" returns a lot of hits, but no product that seems to do what I want. I assume I need a USB dongle that gives a firewire port and has drivers so that the PC sees it as a regular firewire port. Thanks for any recommendations

  Read the article

• Networking not working in Windows 7 - "The account specified for this service is different from the account specified for other services"

  - by tog22

  I have a homebuilt computer with a GA-Z68MA-D2H-B3 motherboard with a Realtek RTL8111E LAN chip. Ethernet was working fine in Windows 7 until I reinstalled this OS, but now it's stopped, while still working in other OSes. I've tried reinstalling drivers from both the Gigabyte and Realtek sites to no avail; I've also plugged in and installed an Asus USB-N13 wifi dongle and this doesn't work oddly. How can I diagnose and fix this issue? In 'Network and Sharing Center' says "The account specified for this service is different from the account specified for other services running in the same process" under the heading 'Unknown'. Following the advice at http://www.sevenforums.com/network-sharing/130159-dependency-service-group-failed-start.html#post1122627 I've gone to 'Control Panel= Admin Tools= Services' and ensured the services listed at that URL are started (one - IIRC 'Come+ Event System' refused to start as user 'Local services' so I've had to set it to log on with the 'Local system account'... I suspect this may be part of the problem).

  Read the article

• Logitech M185 Wirless Mouse issue

  - by Elliot Harrison

  An issue with a Logitech M185 mouse today. A user is unable to use the device. The device works perfectly fine on my PC (It appears as HID-compliant mouse), but not on her laptop. It does not appear in her device manager on the 'Mice and other pointing devices' section. I did notice an unknown device in the Universal Serial Bus Controllers section, but when I try to update the driver, it says it has the most up to date driver. We've tried plugging in the dongle in multiple USB slots but no luck. Any advice? It's a HP 620 Laptop on Windows 7. Thank you :)

  Read the article

• USB Wireless keyboards not registering Ctrl Alt Delete when computer boots

  - by Donovan

  I've recently installed a new PC at work. Its a Dell Optiplex 9010. I bought a USB wireless keyboard and mouse from Dell and subsequently from Logitech to use with this PC. The Dell keyboard is a model KM632 and the logitech is an mk260. Both units work properly and have decent range. The issue is when the PC boots they keyboard (neither model) will register a Ctrl+Alt+Delete to the PC. I can say for sure the keyboards are still functional as the media keys will still produce a result (notably the sleep key on the mk260). My gut reaction is I'm dealing with an issue in the PC or Windows. I'm not sure where to start though. If I unplug and reinsert the USB dongle both units will work. Also, I don't use both they keyboards at the same time I bought the Logitech fearing the Dell unit was bad. Any ideas would be appreciated.

  Read the article

• Scrolling mouse sets windows sound volume

  - by Ikke

  Suddenly, when I use the scroll wheel of my mouse, it changes the windows sound volume level. I have a HP DV6-2030SD laptop with Windows 7 64 bit and a Zolid p50622 mouse. When I use the scroll function of the mouse pad of the laptop, it does not adjust the sound level. I don't have any special mouse drivers installed, just the standard windows drivers. When I scroll, I see the HP sound level screen: It doesn't do it always, but when it does, it prevents the current window to scroll, which is really annoying. Rebooting doesn't help. I've tried to put the USB dongle in a different port, but this doesn't help either. Any advise on how I can fix this?

  Read the article

• DRAC for remote OS install w/o Virtual Media

  - by The Diamond Z

  I have a few DELL servers in a remote DC and our ISP has been very kind about doing OS installs for us. However, as we move to Production and multiple DC's I'd like to be able to do the installs/re-installs internally and DRAC Enterprise w/SDRAM seems ideal. My question is, how do you get your install ISO's on to the SDRAM? Can I just copy it from a local DVD (temp USB hookup) or FTP? What's the advantage to the SDRAM over just buying a USB dongle (to leave plugged into the server) and installing a bootable install ISO? We're a virtual org generally using DSL (2mb) connections to the DC over the Internet and using 'Virtual Media' isn't viable for us.

  Read the article

• openSuse full disk encryption

  - by djechelon

  I'm a proud Suser. I'm about to reinstall 12.2 on my ASUS N76VZ (UEFI x64 laptop). Since I'm very sensitive about laptop security against theft or unwanted inspection, I chose to use BitLocker with USB dongle in Windows 7. When installing Suse the last time I found that only the home partition (separated from root) was capable of being encrypted. Does Suse offer a full disk encryption solution like BitLocker that I haven't discovered yet? Or is encrypting home partition the only way to protect data? Encrypting only home is feasible as one stores personal data in home, but I still would like to encrypt the whole thing! Also, using a hardware token (no TPM available) for unlocking is preferred to password, if possible! Thanks

  Read the article

• Bluetooth Headset drivers on Windows 7

  - by Tom Ribbens

  I have a Dell Precision with integrated bluetooth from work. I wanted to connect either one of my two bluetooth headsets (Plantronics UC Voyager Pro v2 and Sennheiser MM450X) in order to make calls with it using our Cisco IP Communicator. In both cases, the bluetooth pairs ok. Then Windows tries to install drivers, and fails, leaving the device useless. The devices work perfectly with my phone and tablet (both android). What can I do to get it to work? I can't seem to find drivers on either the Plantronics or the Sennheiser site. I am using the Plantronics without the USB dongle they provide, because that is temporarily misplaced :).

  Read the article

• Extend university wifi network [migrated]

  - by asfasdoiuh ouhouhouh

  i live in a university campus and i can get wifi signal on the outside of my window but not in the house. The solution i use at the moment is a usb wifi dongle outside connected to my laptop but the lack of an internal antenna make the connection quite unreliable at times. So i was trying to find another solution to improve the reception of my network. One idea is to setup a router on the outside (in a place with stronger signal) and redirect the connection inside the house with an ethernet cable but the problem is that our Uni Wifi is managed by a capitve portal (BlueSocket with DNS redirection to login page) and the authentication has to happen on the mac address that connect to the net (so the client appliance in this case). If I use a router with Mac-Clone capability i will be able to be redirected trough the captive portal on my laptop computer and login from there or i need to setup my router to fill in the login page by itself? There are other hardware/software solutions i can use to get what i want? Thank you all

  Read the article

• How to get a list of all software that starts automatically when Windows 7 starts?

  - by hippietrail

  I know that under Windows there are multiple ways to get an app to autostart but I can never remember what all of those ways are. Is there a single unified way to bring up a list of all programs which are set to run themselves at startup and let me disable those I don't want? I'd prefer something built into Windows. I have Windows 7 Starter. But a free / open source / shareware tool would also be acceptable. (This time the software I want to prevent from autostarting is: MSN Messenger, Y! Messenger, and Vodaphone Mobile Broadband, which starts whether the dongle is inserted or not. None of these three are in Windows's "Startup" folder.)

  Read the article

• wireless dropping out

  - by Sam

  My wireless network connection is dropping out and its driving me nuts. It is weird because it happens at totally random intervals and other devices work while my computer has been dropped. Both my USB dongle and wifi card randomly disconnect from the router and I am unable to connect for a couple of minutes. It is especially irritating because two different adapters are failing at the same time, sounds like a software problem to me, but where? Both my laptop and iPod remain connected when the connection drops. What on earth is happening? I doubt its the router because the other devices would disconnect as well.

  Read the article

• Dns works, can ping, but cannot load web pages in browser

  - by user1224595

  Yesterday I changed routers, and my desktop computer started acting up. I could ping websites, and nslookup was able to resolve names to addresses, but neither chrome, firefox, nor ie could load any webpages. None of my other computers connected to the same wireless router have any problems. I connect my desktop to the router through a cheap wifi dongle. I did a wireshark capture of the browser request, and I have uploaded the pcap here. https://drive.google.com/file/d/0B7AsPdhWc-SwbTV0bUJLQXo4UUE/edit?usp=sharing One strange thing I noticed was the spamming of ssdp packets. I am not super familiar with networking, but it seems that it is not a problem with the router, as dns works, and so does dhcp (the desktop is assigned an address correctly). Any help would be appreciated.

  Read the article

• Extend university wifi network

  - by asfasdoiuh ouhouhouh

  i live in a university campus and i can get wifi signal on the outside of my window but not in the house. The solution i use at the moment is a usb wifi dongle outside connected to my laptop but the lack of an internal antenna make the connection quite unreliable at times. So i was trying to find another solution to improve the reception of my network. One idea is to setup a router on the outside (in a place with stronger signal) and redirect the connection inside the house with an ethernet cable but the problem is that our Uni Wifi is managed by a capitve portal (BlueSocket with DNS redirection to login page) and the authentication has to happen on the mac address that connect to the net (so the client appliance in this case). If I use a router with Mac-Clone capability i will be able to be redirected trough the captive portal on my laptop computer and login from there or i need to setup my router to fill in the login page by itself? There are other hardware/software solutions i can use to get what i want?

  Read the article

• is it possible in this case to get two IPv6 networks to communicate over the IPv4 Internet?

  - by user239167

  I have a setup of a laptop connected to a cellular IPv4 network (3G usb dongle) and PC connected to another IPv4/IPv6 network. Both have been configured to run as IPv6 routers and each has its IPv6 network. The laptop connects to the Internet via the 3G network with IPv4 address (private one and it is mostly changing) on one interface and has the other interface on AP mode providing its own private IPv6 network (2001:db8:444::/64). The PC connects to the Internet via the organization network with both public IPv4 and IPv6 addresses on one interface and has the other interface on AP mode providing its own private IPv6 network (2001:db8:222::/64). Both running Linux Ubuntu. Is it possible to get the two IPv6 network (2001:db8:222::/64 and 2001:db8:444::/64) to communicate over the IPv4 Internet? Is openvpn of any good in this case to get IPv6 traffic over IPv4-IPv4 tunnel? Thanks for helping in advance

  Read the article

• Bluetooth headset turns off when Skype call ends

  - by Claude

  For about 6 months, I haven't been able to use Skype because when I end a Skype call, my Plantronics Callisto headset gets turned off. I'm paralyzed so I can't turn it on manually. I have a Sony VAIO computer running Windows 7. I have updated my Bluetooth dongle software, uninstalled and reinstalled Skype and uninstalled Skype and gone back to an earlier version; all to no avail. Neither Plantronics nor Skype technical support are interested in looking into this problem for me.

  Read the article

• Windows freezes, showing a random color or pattern

  - by Manu

  I have a PC with windows 7, and I'm experiencing random freezes with increasing frequency. After some time (from 30 minutes to a few hours) the screen will shows a random color or pattern (vertical lines) and nothing works anymore, I need to reboot manually. I've checked the events log, but nothing is shown except for the unexpected reboot. I've tested the RAM with Memtest86+ 4.20, and the graphics card with FurMark 1.10.3, no errors have been found. I've updated the graphic drivers and openned the case to remove dust, but the issue is still there. Also, the problem doesn't seem to arise when I'm playing games fullscreen, but when I'm surfing the web, using itunes, or coding. My hardware is as follows : intel core i5 750 CPU, ATI Radeon HD 5670 graphics card, ASUSTeK P7P55D motherboard, two 2Gb KINGSTON DDR3 ram sticks, 2 SATA hard drives, a Netgear dongle for wifi.

  Read the article

• DVI vs HDMI graphics card output

  - by Shack

  Asking on behalf of someone: I want to buy a new graphics card but do not know which would be best in terms of output, DVI or HDMI, the sound part of the HDMI is not really required, I just need something to go to my new 32 inch hd tv. It accepts both DVI and HDMI. I only need it for basic gaming but mostly as a media center to watch movies and tv shows on. Also for windows media center's TV application, I need a tv card, should I get a graphics card with bult in tv card, or a usb dongle??

  Read the article

• starting command automaticaly [closed]

  - by aaa

  playing with Debian on raspberry pi. I have a 3g dongle modem on the system and there is a software called sakis3g to connect to internet. I want system to connect to internet automatically every time it starts. It takes about 30-40 seconds to get connected. copied sakis3g to /sbin folder. This command has to be run as root: sakis3g connect parameters blah blah blah I tried to put it in the /etc/rc.local and rebooted system, but no luck. I tried to put it in the crontab as: @reboot sakis3g connect parameters blah blah blah What am I missing here?

  Read the article

• How do I connect my NetXtreme BCM5755M Gigabit Ethernet PCI Express in y Dell latitude d630?

  - by Stanton.Sculpture

  Trying to get my 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5755M Gigabit Ethernet PCI Express (rev 02) working with my wifi. I just installed Raring Ringtail on this dell latitude D630 and I can't get it to connect without a wifi dongle. This is what I got when I typed sudo lshw -c network: *-network description: Ethernet interface product: NetXtreme BCM5755M Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: 02 serial: 00:21:70:98:04:32 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.128 firmware=5755m-v3.29 latency=0 link=no multicast=yes port=twisted pair resources: irq:44 memory:fe8f0000-fe8fffff *-network description: Wireless interface physical id: 2 bus info: usb@2:1 logical name: wlan0 serial: 7c:dd:90:11:a0:10 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2800usb driverversion=3.8.0-31-generic firmware=0.29 ip=10.0.0.8 link=yes multicast=yes wireless=IEEE 802.11bgn Also, when I go to additional drivers in the software and updates settings, no proprietary drivers show up. I've tried sudo apt-get install b43-fwcutter firmware-b43-installer because it worked on a bunch of old Dell laptops that I converted over before, but it didn't work on this one. Is this driver even compatible with wifi? Please help.

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8  | Next Page >