Search Results

Search found 176 results on 8 pages for 'dongle'.

Page 6/8 | < Previous Page | 2 3 4 5 6 7 8  | Next Page >

• Huawei E3276 LTE uplink slow in the routing Ubuntu, but not with other devices in the LAN

  - by Mytomi

  I have a Huawei E3276 LTE dongle (12d1:14fe - 12d1:1506) and a problem with the upstream speed. The problem is not only present with Ubuntu 14.04 LTS (64 bit workstation, kernel 3.16), but also with Raspbian Jessie for Raspberry PI (kernel 3.14). Upstream seems to be always limited to 5 Mbit/s whenever I check the speed from the Linux computer that I use as a LTE router. The other computers in the LAN always get about 10-15 Mbit/s upstream, even though the traffic is routed through the same Linux computer suffering from seemingly capped uplink. Downstream speed is always fine, 25 Mbit/s. I even installed Windows 7 in the same computer as Ubuntu and the speeds are 25 Mbit/s down, 15 Mbit/s up. So the problem is not with E3276 device itself or in the mobile subscription, but in the Huawei E3276 Linux compatibility. Maybe something in the kernel? I have made sure that the matter is not with iptables rules: the speed does not noticeably increase when iptables is disabled. Turning off IPv4 forwarding does not improve speed either. I'm not sure what settings and logs do help in debugging the situation. Please ask for more details, if you have a clue what might be wrong. Thanks, Mytomi

  Read the article

• How to use the Raring/Saucy netboot installer to install Precise?

  - by mikepurvis

  We have a Haswell motherboard with onboard ethernet controllers which are not supported in the Precise (3.2) kernel. However, we're using netboot installation, and we'd really like to stick with the LTS version. Once the Precise install is completed, we can install the linux-generic-lts-saucy package, which gets us the ethernet hardware support which is ultimately required. So, our options are: Plug in a USB-Ethernet (or even wifi) dongle, perform the install that way. Modify the Precise installer to somehow include the required driver (a udeb, or some early_command invocation?) Modify the Raring installer (3.8 kernel, which supports the device) to instead install Precise. If it's possible the third option seems like the simplest and most logical to me. Now, we are already using the precise-updates installer (Aug 2013), as opposed to the original April 2012 installer. However, the precise-updates installer still appears to use the 3.2 kernel. I'm already comfortable with preseeding and modifying the netboot initrd. So my question is, can I somehow modify the Raring/Saucy netboot initrd to instead install Precise? Thanks.

  Read the article

• Microsoft IntelliMouse episodic pauses

  - by Rob Hills

  I have a Microsoft IntelliMouse connected via USB to a computer (directly, NOT via hub) currently running Ubuntu 11.10, but this problem also existed before we upgraded from 10.10. Every now and then (apparently randomly) the computer "pauses" for anything up to a few seconds. This usually occurs after a mouse movement and during the pause, the computer is completely unresponsive to mouse or keyboard. lsusb shows: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0409:0058 NEC Corp. HighSpeed Hub Bus 001 Device 004: ID 05e3:0605 Genesys Logic, Inc. USB 2.0 Hub [ednet] Bus 003 Device 013: ID 045e:001e Microsoft Corp. IntelliMouse Explorer Bus 001 Device 005: ID 04a9:1097 Canon, Inc. PIXMA iP5000 Bus 001 Device 006: ID 0a5c:200a Broadcom Corp. Bluetooth dongle Bus 001 Device 007: ID 0911:1c57 Philips Speech Processing Bus 001 Device 008: ID 04a9:2219 Canon, Inc. CanoScan 9950F so the mouse appears to be correctly identified. Syslog episodically shows the following sequence: Jan 15 11:48:32 kayes-computer kernel: [10588.512036] usb 3-1: USB disconnect, device number 10 Jan 15 11:48:33 kayes-computer kernel: [10589.248026] usb 3-1: new low speed USB device number 11 using uhci_hcd Jan 15 11:48:33 kayes-computer mtp-probe: checking bus 3, device 11: "/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1" Jan 15 11:48:33 kayes-computer kernel: [10589.448596] input: Microsoft Microsoft IntelliMouse® Explorer as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input11 Jan 15 11:48:33 kayes-computer kernel: [10589.448706] generic-usb 0003:045E:001E.000B: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Explorer] on usb-0000:00:1d.1-1/input0 Jan 15 11:48:33 kayes-computer mtp-probe: bus: 3, device: 11 was not an MTP device though I can't confirm if these are directly associated with the "pauses". Any thoughts on what might be causing this or what else I can do to diagnose the problem?

  Read the article

• My card reader doesn't show up at all, but previously did in 10.10

  - by Nathan J. Brauer

  I bought a pin-based-USB powered internal media card reader and it worked perfectly when I first installed Ubuntu 10.10 a month ago. I used it a few times since and today I booted up the computer and it's not working. Here's how it used to work: In nautilus->computer, 5 "drives" would display even when no card was inserted. One for each slot (SD, XD, CF/MS, etc). Opening one w/o a card would initiate a "Please insert card." dialog. Inserting a card would automatically open nautilus. Now: No drives display at all whether cards are inserted or not. lsusb lists the following (which seems to indicate that it's not being detected) Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 002: ID 046d:c52e Logitech, Inc. (my keyboard/mouse) Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub (A side note, all of my USB ports are 2.0 + 1 USB port which is 3.0, why does everything say 1.1/2.0?) I tried using ubuntu-bug but for USB devices it expects you to be able to remove and insert them while the computer is running -- obviously something you probably shouldn't be doing when you're dealing with devices plugged straight into the USB pins. Thanks in advance!

  Read the article

• Mouse click events are delayed when moving the cursor in xubuntu 12.04

  - by bobbaluba

  I am trying out live xubuntu on my samsung n150 (netbook, similar to eeepc). So far everything seems perfect, except for this one thing. When I am clicking the mouse while moving the cursour, the click event is delayed. This is extremely annoying when i try to to move windows, because i end up clicking the window behind the window i am trying to move and thereby changing focus. This goes for all applications. I.e selecting text is difficult. There is no lag in the cursor movement, just the click event. The click event is registered with the new mouse position, not the one when the mouse was clicked. I tried searching for the problem, but all the other cases where either kind of different, or had no solution. EDIT: After testing some more, here are some more information. The click doesn't occur until i stop moving the cursor. If I move the cursor smoothly around, the click never gets through. I have ubuntu netbook remix 10.04 installed, and have no problems with the mouse there. EDIT2: Once I connected a usb-mouse, the problem dissappeared. Dragging now works perfectly with both the track pad and the usb mouse. I will update once I have installed xubuntu and figured out if this is a persistant problem. EDIT3: I have installed, and the problem is still there. It dissappears when I have a second mouse connected however, and after I resume from suspend. My solution for now, is just to keep the dongle connected all the time.

  Read the article

• My wireless has suddenly became disabled by hardware switch, BIOS, rfkill, fn+f8 do nothing

  - by cwwk

  I have a toshiba l655d-s5145. There is no physical toggle for the wireless, although the f8 key is supposed to do the trick. It doesn't. The wireless has been working since October, and suddenly, nothing. RFKILL reports that the wireless is hard blocked, but unblock wifi, unblock 0, unblock all do nothing. I inserted a usb dongle, and that is also disabled by hardware switch, although rfkill reports that it is neither hard nor soft blocked. My onboard wireless is 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) according to lspci. Lsmod reports that these drivers are loaded. rtl8192c_common 75767 1 rtl8192ce rtlwifi 110972 1 rtl8192ce I resorted to reformatting the drive and reinstalling, but that also did not work. In BIOS I restored system defaults as there is no specific entry for wifi. Before reinstalling a pure xubuntu I went into Unity and saw that the airplane mode was on and despite being toggled off, it returned to the on position. I'm not sure where to find airplane mode in Xubuntu. What else can I do? I need my wireless.

  Read the article

• ifconfig can't see USB wireless

  - by Alex

  I have a wifi USB dongle which I have previously used on a Raspberry Pi (this it is what it is target at). I am trying to get it working on an Nvidia Jetson TK1, however I am having some problems. When I run ifconfig I can't see the wifi, only the ethernet and local loopback. iwconfig reports no wireless extensions on all devices. lsusb does find the device: Bus 002 Device 008: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter So I am not sure why the network tools can't see it. I have tried logging on with a GUI and opening up the network settings through Unity, but cannot see any wireless devices either. Not sure if this is useful, but output of lsmod: Module Size Used by nvhost_vi 2940 0 How can I enable wireless networking on this computer? Command line approach is preferred, but either is fine. UPDATE I don't have the kernel module rt2800usb anywhere on my system. If I do an apt-file search for rt2800usb it lists a number of packages of the pattern: linux-image-3.13.0-*. Perhaps installing one of these will do the trick, but can anyone tell me if its safe to do so?

  Read the article

• Ubuntu 12.04 + Bluetooth problems with maintaining connection

  - by ifndefx

  I have an Apple Wireless Mouse, Apple Wireless Keyboard, Apple Wireless Trackpad, and a pair of headphones. All of these connect to the computer via a Bluetooth dongle. After several hours I've managed to get the devices paired (all except the headphones) with the computer. However, I'm facing a problem where a connection can't be maintained even with one device. I first started with the gnome bluetooth applet, this couldn't even pick up devices, so I installed blueman, and this at least detected the devices but it couldn't keep the connection going. Then i read somewhere to get hidd installed and use the command line using the mac address of the device (which I got from blueman) and this worked really well, the connection was stable, but there's still a couple of issues that I need help with: If I am to use hidd I need to execute this via terminal, which means for the keyboard and the mouse I need to have two of each. This doesn't make sense. I need the bluetooth daemon to have started with the devices picked up a lot earlier, and especially at grub bootloader. The mouse and the trackpad both work if i use hidd, however, I cannot get the right mouse to work nor the scroll wheel to work. The headphones don't work period, they don't work with any of the bluetooth applets, and with hidd either. When I use blueman aplet, it attempts to pair and states 'Authentication Rejected". The headphone is Phillips SHB9100. If someone can help me with this, I would be grateful.

  Read the article

• Device driver with generic communication media layer

  - by Tom

  Greetings all, I'm trying to implement driver for an embedded device with generic communication media layer. Not sure what is the best way to do it so I'm seeking an advice from more experienced stackoverflow users:). Basically we've got devices around the country communicating with our head office. Usual form of communication is over TCP/IP, but could be also using usb, RF dongle, IR, etc. The plan is to have object corresponding with each of these devices, handling the proprietary protocol on one side and requests/responses from other internal systems on the other. The thing is how create something generic in between the media and the handling objects. I had a play around with the TCP dispatcher using boost.asio but trying to create something generic seems like a nightmare :). Anybody tried to do something like that? What is the best way how to do it? Cheers, Tom

  Read the article

• Error in java code.

  - by user243680

  I am getting the following error when i try to use a blue tooth dongle to transfer a video file from pc to mobile phone. does anyone know run: BlueCove log redirected to log4j log4j:WARN No appenders could be found for logger (com.intel.bluetooth). log4j:WARN Please initialize the log4j system properly. BlueCove version 2.1.0 on bluesoleil java.io.IOException: Device not discovered BlueCove stack shutdown completed at com.intel.bluetooth.BluetoothStackBlueSoleil.connectionRfOpenClientConnection(BluetoothStackBlueSoleil.java:361) at com.intel.bluetooth.BluetoothRFCommClientConnection.<init>(BluetoothRFCommClientConnection.java:37) at com.intel.bluetooth.MicroeditionConnector.openImpl(MicroeditionConnector.java:379) at com.intel.bluetooth.MicroeditionConnector.open(MicroeditionConnector.java:162) at javax.microedition.io.Connector.open(Connector.java:83) at de.avetana.obexsolo.OBEXConnector.open(OBEXConnector.java:103) at OBEXTest.main(OBEXTest.java:23)

  Read the article

• BlueCove failing to associate with Bluetooth device in Java.

  - by user243680

  I am getting the following error when i try to use a blue tooth dongle to transfer a video file from pc to mobile phone. does anyone know run: BlueCove log redirected to log4j log4j:WARN No appenders could be found for logger (com.intel.bluetooth). log4j:WARN Please initialize the log4j system properly. BlueCove version 2.1.0 on bluesoleil java.io.IOException: Device not discovered BlueCove stack shutdown completed at com.intel.bluetooth.BluetoothStackBlueSoleil.connectionRfOpenClientConnection(BluetoothStackBlueSoleil.java:361) at com.intel.bluetooth.BluetoothRFCommClientConnection.<init>(BluetoothRFCommClientConnection.java:37) at com.intel.bluetooth.MicroeditionConnector.openImpl(MicroeditionConnector.java:379) at com.intel.bluetooth.MicroeditionConnector.open(MicroeditionConnector.java:162) at javax.microedition.io.Connector.open(Connector.java:83) at de.avetana.obexsolo.OBEXConnector.open(OBEXConnector.java:103) at OBEXTest.main(OBEXTest.java:23)

  Read the article

• Licensing your code in Mono

  - by Jerry

  I'm working with some code in Visual Studio. My parter-in-crime fellow developer has suggested that the code also be available to work under Mono. I'm impresed witht he work that is already done in Mono, but I'm very new to Mono, so I don't know what it can/cannot do. I've already written a class in C# using the .NET LicenseManager object. It writes to the windows registry, so I know I'll have to modify it so that it will use some compiler flags like #if Win32 or #if MONO. My question is two-fold: 1) Does Mono implement the same LicenseManager class structure? 2) If so, how do you guys lock down your code using LicenseManager in Linux? (i.e. Write to files, use a hardware dongle, compare to hardware serials, etc??)

  Read the article

• Connecting PC via Bluetooth SNP

  - by Nicholas

  Hi, I have a widcomm example BluChat "WIDCOMM SDK RFComm Service" running on my PC with an USB dongle (BT-2400P). I would like to connect this chat from my HTC Desire. So I stared with the Java example http://developer.android.com/resources/samples/BluetoothChat/index.html. This is also using BT RFComm. If I'm using my HTC as a server it work's fine, but I would like to use my PC as a server. Then .connect() comes back with "Service Discovery Failure". I have modified the UUID string in the Java example to match the PC-application mmSocket = mmDevice.createRfcommSocketToServiceRecord(UUID.fromString("5fc2a42e-144e-4bb5-b43f-4e61711d1c32")); mmSocket.connect(); What is missing? Any help appreciated. Nicholas

  Read the article

• Acer Allionone Z5810 Touchscreen Issues 12.04

  - by Johannes

  I have an Acer Allionone Z5810, and I can't get the touchscreen to work after I install 12.04. Here is the lsusb output: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 0596:0508 MicroTouch Systems, Inc. Bus 001 Device 004: ID 04b8:0005 Seiko Epson Corp. Printer Bus 001 Device 005: ID 07ca:1336 AVerMedia Technologies, Inc. Bus 002 Device 003: ID 04ca:0058 Lite-On Technology Corp. Bus 002 Device 004: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 002 Device 005: ID 04f2:b23f Chicony Electronics Co., Ltd xinput --list Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Lite-On Technology Corp. Wireless Device id=9 [slave pointer (2)] ? ? Lite-On Technology Corp. Wireless Device id=10 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Power Button id=7 [slave keyboard (3)] ? Lite-On Technology Corp. Wireless Device id=8 [slave keyboard (3)] ? USB 2.0 camera id=11 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=12 [slave keyboard (3)] My xorg.conf contains: nvidia-xconfig: X configuration file generated by nvidia-xconfig nvidia-xconfig: version 304.48 (buildmeister@swio-display x86-rhel47-04.nvidia.com) Sun Sep 9 21:31:39 PDT 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" InputDevice "TouchScreen" EndSection Section "Files" EndSection Section "InputDevice" Identifier "TouchScreen" Driver "microtouch" Option "Type" "finger" Option "Device" "/dev/ttyS3" Option "ScreenNo" "0" Option "MinX" "0" Option "MaxX" "16383" Option "MinY" "0" Option "MaxY" "16383" Option "SendCoreEvents" "yes" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Looking for USB Network Attached Storage (NAS) Adapter that supports multiple drives, NTFS/FAT32 fil

  - by braveterry

  I'm looking for a NAS Adapter that supports attaching multiple USB devices to the network. Here's what I'd like to see in a NAS adapter: Under $100.00. Support for multiple devices. This can be through a USB hub or through multiple USB connectors on the device itself. Bittorrent support would be nice, but this isn't a deal-breaker. Filesystem support for at least NTFS or FAT32. I'd prefer to not have to reformat to use the device, but this is also not a deal-breaker. Here is what I am NOT looking for: I'm NOT looking for a NAS enclosure. I already have a couple of spare external USB drives that I'd like to use. I'm NOT looking for a networked USB hub like the one mentioned here. Network USB hubs only allow access to a drive from one PC at a time. I'm NOT looking for a wireless router with a NAS built in. I already have a wireless router, and I'd rather not go through the hassle of replacing it if possible. What I've looked at so far PogoPlug: This supports multiple devices via a USB hub, but there's not Bittorrent support. It's $99.00, so I may end up going with this and hope that they patch in Bittorrent support later. Addonics NAS Adapter: This supports only one device per adapter, so it's a non-starter. SimpleNET NAS Head USB 2.0 Portable Dongle: I'm not 100% sure this supports multiple devices. Plus there doesn't seem to be any Bittorrent support. I'll try to update this post as I explore other devices.

  Read the article

• access an IP restricted service from a dynamic IP (Broadband modem) on a windows machine

  - by Joel Alenchery

  Hi, I dont know if this is the correct place to ask this question but here goes .. (please note that I am pretty much a newbie in terms of networking and I work primarily on the windows platform) I have been working on accessing and consuming some web services in C#/ASP.Net, these web services that I consume are IP restricted. Currently they allow access only from my work network (we have a static ip set up through which all our internet requests are routed). Every now and then we have people who go out and about and are stuck with using a usb dongle based internet connection and hence are not able to now access these web services that they are working on. What I would like to do is to provide some way for these remote workers to access the IP restricted web services using the static ip at our office. For example when the remote worker tries to access a service say http://exampleService.com .. the request gets routed to some box at our office and then out to the actual service. That way the service always sees the static ip of the office and not the dynamic ip that the remote user is actually using. I have done a fair bit of googling and its difficult to search for it as most of the results come back for dynamic DNS which is not really what I am looking for. I have also looked at a couple of posts on here namely Accessing IP restricted server from dynamic IP which does provide some insight but the fellow seems to have access to the source that does the ip restriction and is able to change the restrictions. In my case i dont have that access. another one that looked interesting was Static IP for dynamic IP the first answer seems exactly what I need but I dont know how I would go about doing the same on a windows machine. any help would be really appreciated. (am sorry about being soo noob-ish) PS: Right now everyone is using RDC/LogMeIn to access an internet connected machine in the office to manually check the webservice and getting work done. Which is a very tedious process.

  Read the article

• access an IP restricted service from a dynamic IP (Broadband modem) on a windows machine

  - by Joel Alenchery

  Hi, I dont know if this is the correct place to ask this question but here goes .. (please note that I am pretty much a newbie in terms of networking and I work primarily on the windows platform) I have been working on accessing and consuming some web services in C#/ASP.Net, these web services that I consume are IP restricted. Currently they allow access only from my work network (we have a static ip set up through which all our internet requests are routed). Every now and then we have people who go out and about and are stuck with using a usb dongle based internet connection and hence are not able to now access these web services that they are working on. What I would like to do is to provide some way for these remote workers to access the IP restricted web services using the static ip at our office. For example when the remote worker tries to access a service say http://exampleService.com .. the request gets routed to some box at our office and then out to the actual service. That way the service always sees the static ip of the office and not the dynamic ip that the remote user is actually using. I have done a fair bit of googling and its difficult to search for it as most of the results come back for dynamic DNS which is not really what I am looking for. I have also looked at a couple of posts on here namely http://serverfault.com/questions/187231/accessing-ip-restricted-server-from-dynamic-ip which does provide some insight but the fellow seems to have access to the source that does the ip restriction and is able to change the restrictions. In my case i dont have that access. another one that looked interesting was http://serverfault.com/questions/136806/static-ip-for-dynamic-ip the first answer seems exactly what I need but I dont know how I would go about on a windows machine. any help would be really appreciated. (am sorry about being soo noob-ish) PS: Right now everyone is using RDC/LogMeIn to access an internet connected machine in the office to manually check the webservice and getting work done. Which is a very tedious process.

  Read the article

• Weird connectivity issue wtih USB Wifi stick.

  - by Carlos Nunez

  Hi, all! I'm not sure if this is the appropriate place to throw this question out there, but I'll give it a shot. I'm setting up two PCs, and I've been having massive troubles getting a USB wireless dongle working. I have two Sony VAIOs (Windows XP, SP2) that I found second-hand, and since they will be in a location too far to connect by Ethernet (no, can't do patch panels here :p), I need to connect them by wireless. Easiest and cheapest way to do that at the moment is by using two USB wireless sticks that I've had for a while, but never used. One of the computers is using a SMC-manufactured card, whereas the other is using a Belkin F5D7050. The box with the SMC card can see and authenticate with my router just fine, and has no problem obtaining a DHCP lease. The box with the Belkin, on the other hand, isn't so lucky. While it can see my router and associate with it, it will not obtain a DHCP-issued address. Worse, when I assign a static IP address to the NIC, it can ping the entire network and access the internet (meaning it can authenticate with the router), but no computer can ping to it UNLESS that computer pinged the computer that's pinging it first. Confused? Well, so am I. Has anyone had this issue before? Is this just a sign of a bad card? (For the moment, I have it connected by Ethernet, as I haven't moved it yet. However, this will be a problem when I set it up in its new home later.) Thanks! -Carlos Nunez

  Read the article

• How to restore broken Ethernet functionality on Mac G5 running Mac OS 10.4.11 (Tiger)

  - by willc2

  I had a disk error that rendered my Mac unbootable. I repaired it with Tech Tool 4, but now networking does not work. Network Preferences reports that my Ethernet cable is unplugged. I know this is bogus because when I boot from an emergency partition, networking works correctly. Furthermore, wireless networking is also broken, which I tested with a known-good Wi-Fi dongle. Whenever I try to change Network Port Configurations by creating a New or Renaming an existing one, example: I get this message in the console: Error - PortScanner - setDevice, device == nil! Error - PortScanner - setDevice, device == nil! In sets of two as shown. When I try to invoke the Network Diagnostics app, it immediately crashes. My first thought is to reinstall Tiger with the Archive and Install method so I don't have to reinstall all my applications but I have lost my Tiger installer disk. My next thought is to buy Leopard for $107 on Amazon. If there is any way I can just repair my Tiger install I would be happy to save that money, though. This is not my main machine and I am loathe to put more money into it. How can I recover my network functionality? UPDATE: I found my Tiger install disk and tried an Archive and Install. It failed with an unhelpful error message along the lines of "Can't install, try again". I tried again but had the same error. My guess is, some corrupt or missing file in my User folder is preventing migration. I have a backup created with Super Duper that is a bit out of date but will startup the machine (with functional networking). I would love to just copy over the file(s) that got messed up but I don't even know where to look. What is the likely location of the System files that would cause the aforementioned symptoms?

  Read the article

• Converting DisplayPort and/or HDMI to DVI-D?

  - by Jeff Atwood

  Newer Radeon video cards come with four ports standard: DVI (x2) HDMI DisplayPort If I want to run three 24" monitors, all of which are DVI only, from this video card -- is it possible to convert either the HDMI or DisplayPort to DVI? If so, how? And which one is easier/cheaper to convert? I did a little research and it looks like there isn't a simple "dongle" method. I found this DisplayPort to DVI-D Dual Link Adapter but it's $120; almost cheaper to buy a new monitor that supports HDMI or DisplayPort inputs at that point! There's also a HDMI to DVI-D adapter at Monoprice but I'm not sure it will work, either. AnandTech seems to imply that you do need the DisplayPort-to-DVI: The only catch to this specific port layout is that the card still only has enough TMDS transmitters for two ports. So you can use 2x DVI or 1x DVI + HDMI, but not 2x DVI + HDMI. For 3 DVI-derived ports, you will need an active DisplayPort-to-DVI adapter.

  Read the article

• How can I find files added to the system within X minutes of a specific time?

  - by Jack W-H

  I have done a fresh install of Mac OS X Mountain Lion today on a new MacBook. Because this was a new install, when I finally got round to configuring some of my own developer things, I was surprised to find some app had installed a binary into /usr/local/bin - a single binary called galileod. Interestingly, I can't find anything online about galileod. I had only installed the bare minimum of software at this point. Looking in the file columns I can see Date Modified was 9th November 2012, but Date Added to the system was today at 17:01. It's now 10:20PM and I can't remember which software I was installing at that point. So how do I find out which other files were installed to the system within, say, 5 minutes either side of 17:01? EDIT: I found out what galileod was by running galileod --help - it is a binary used with Fitbit to communicate with the USB dongle. So that's the mystery solved - but it would still be interesting to know how to find files added within X minutes of a timeframe for future reference.

  Read the article

• Vista laptop 1 connects to network but Vista laptop 2 doesn't

  - by Jaips

  (Sorry if this is a dulipcate. I did a hunt but couldn't find matching question) We recently got a new router for our network (thomson TG585v8). It was already pre-configured by the ISP and was easy to setup. Both Vista laptops in this home network connected without trouble as well a iPod touch, all via wifi. In the last two days one of the laptops has been unable to connect cleanly to the network (connects as unidentified network). The other laptop, and iPod have not had any issues. I can't think of anything that has changed to make this happen now. I have rebooted the laptop and the router. I have updated the laptop wireless driver I have checked the laptop is set to automatically get IP I have logged into the router which correctly identifies all three wireless devices. The problem laptop connects via LAN without issue. Some things that may or may not matter: The problem laptop also sometimes uses a 3G dongle Both laptops use Windows Live Mesh to sync folders Laptop is usually set to go to sleep NB: it seems this is an intermittent issue, after an hour (since i noticed it) it seems to have fixed itself. Would love ideas though to solve this problem for good.

  Read the article

• Two parts: linux startup script to connect to bluetooth and cron to keep it connected

  - by D.R.

  I have a mini bluetooth keyboard and a Raspberry Pi running a Debian-based distro. I know the MAC address of the keyboard but for this question, let's just use AA:BB:CC:DD:EE:FF. Right now I have to have a wired keyboard connected as well as my bluetooth dongle for the mini-keyboard and on the wired keyboard, I have to run the following when the device boots up: sudo hidd --connect AA:BB:CC:DD:EE:FF If the device goes idle for too long, then the bluetooth disconnects and I have to pull out my wired keyboard and retype that same command. What I'm looking for it a way to have that command run at startup and a way to sense if it gets disconnected so that it will auto reconnect. The annoying thing is that they keyboard has to be in pairing mode (even though it has already been paired) when I run that command, otherwise it tells me the host is down. So perhaps the script needs to prevent it from disconnecting due to inactivity, otherwise I'll have to put it back in pairing mode to reconnect. So to recap: - A script to connect at startup (I can make sure to put the keyboard into pairing mode before turning it on) - A script to prevent it from disconnecting (maybe some sort of signal to send to it every 60 seconds or something?) Any help with this is greatly appreciated! StackOverflow is always the best place to find answers to weird questions! I've been searching long and hard for an answer, but finally had to resort to coming here! Thanks!

  Read the article

• Wireless connection drops when wired computer starts a game.

  - by Skadlig

  Starting this week I have had a strange problem on my network. Some background of my setup: Internet is provided by a adsl-modem. A D-link Dir-600 router is hooked up to to adsl-modem. My computer is hooked up to the router using a cat-5 cable. My wife's computer is hooked up using a wireless usb dongle, TP-Link TL-WN821N. Both computers use windows 7 64-bit home premium. Up until this week everything was normal, we could for instance play Dungeons & Dragons Online together without any network issues. Now every time I start DDO or any other network game, for instance L4D, the whole wireless network drops. I have confirmed that it's not just her computer using an Samsung Galaxy Spica android phone. Shutting down the game on my end restores the wireless connection automagicly. My wife can start DDO without the net dropping but if I plug in a wireless network card in my computer and start up the game the connection drops. So it seems like something my computer, and my computer only, does when starting a game makes the wireless connection write a sad note and kill it self but for the life of me I can't figure out what that might be. I could hook her computer up using cat-5 but I would prefer not to do that. Does anyone have any suggestions as to what the problem might be, what I can do to fix it or what I should do to get more data regarding what is happening?

  Read the article

• Debugging Windows PC freeze

  - by Violet Giraffe

  I have a problem with my computer, would appreciate any hints/ideas. It usually begins not immediately after booting Windows, but at some unpredictable point in time, which doesn't seem to correlate with any specific actions of mine. First sign of a problem is process System starting to consume 25% CPU time steadily. I have a quad-core CPU, so it might be one thread working non-stop. At this point micro-freezes start to occur - screen stops refreshing, but if I have, say, music player running - it continues playing. If I try to do something between the freezes, like open Start menu, it will freeze completely and forever. If I press reset button the PC will shut down and then start cold, as opposed to usual reset behavior (which doesn't include PC shutting down). I have noticed that full restart upon reset is usual for hardware problems, but I think this problem isn't related to at least motherboard-CPU-RAM-videoadapter. It certainly isn't caused by overheating. One very important not is that it seems to be related to Windows hosted WLAN network: I have USB Wi-Fi dongle and have configured a hosted network to share cable Internet connection with Wi-Fi devices. I am not 100% certain there's a strong connection, but in 9 or 10 cases when I enabled the network (by executing netsh wlan start hostednetwork), it did freeze eventually (sometimes within minutes of starting the network, sometimes within hours), and on at least 10 days when I didn't start the network it never froze, no matter how I used the computer). There are no critical/error entries in the events log that I can suspect as being related, only regular stuff like "driver not loaded". I have found no critical/error events that are being logged around the time of freeze occurring and are not logged during normal boot without starting the WLAN.

  Read the article

< Previous Page | 2 3 4 5 6 7 8  | Next Page >