Search Results

Search found 6373 results on 255 pages for 'dvd ram'.

Page 5/255 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Developer's PC - worth getting more than 8GB RAM?

  - by Borek

  I'm building a developer PC and am wondering whether to get 8GB or 12GB. It's a Core-i7 860 system, i.e., 1156 motherboards with 4 slots for RAM sticks, dual channel, usually up 16GB (as opposed to 1366 sockets where 6 banks / triple-channel are used). 8GB would be cheaper to get especially because price per GB is lower with 4x2GB compared to 2x4GB. Also the availability is worse for 4GB DIMMs here where I live; those are the main practical advantages of 8GB. (Edit: I should have stressed the price difference more - in the eshop I'm buying from, the difference between 12GB and 8GB is so big that I could almost buy a whole new netbook for it.) However, I understand that more RAM can never do harm which is the point of this question - how much of a difference will 12GB make as opposed to 8GB? Honestly, I've always been on 3.2GB systems (4GB but 32bit system) and never felt much pain from having too little memory - of course there could be more but for instance compiler's performance was usually held back by slow I/O or not utilizing multiple cores on my CPU. Still, I'm not questioning that 8GB will be useful, however, I'm not sure about the additional 4GB difference between 8 and 12 gig. Anyone has experience with 8GB / 12GB systems? The software I usually run all the time: Visual Studio or Eclipse (both should be fine with ~2GB RAM, after that I feel their performance is I/O bound) Firefox (it can never have enough RAM can it? :) Office (~500MB RAM should be enough) ... and then some smaller apps like Skype, other browsers, some background services etc.

  Read the article

• ram monitoring on linux

  - by user40157

  I would like to monitor the ram of two linux systems (Ubuntu and Red Hat). I realize I can run memtest86 from boot to diagnose bad ram. But are there are any solutions to monitor ram while the system is still running. I'm sort of thinking a daemon that writes and reads back from random unused memory. Anybody seen something like this before?

  Read the article

• RAM modules compadibility

  - by teejmya

  My current laptop has 3GB (1x2GB, 1x1GB) of DDR2 RAM installed, and they run at 667MHz. I just ordered a new laptop, that comes with 2GB (2x1GB) of DDR3 RAM that runs at 1066MHz. Is there any compatibility with the two? Can I install the 2GB stick in my old laptop in the new laptop, and have both DDR2/DDR3 and 667MHz/1066MHz operating together? Or should I buy a new RAM stick for my new laptop?

  Read the article

• CentOS only detecting 50% of ram

  - by Devator

  I have 16GB ram in my machine. Before, free -m outputted the normal 16 GB ram, however now (after a reboot) it only detects 8 GB ram. Is one ram module damaged? grep -i memory /var/log/dmesg outputs Memory: 15621184k/16017200k available (2535k kernel code, 387120k reserved, 1748k data, 196k init). (Which looks like 16 GB to me). Free -m outputs: total used free shared buffers cached Mem: 7484 7415 68 0 6104 524 -/+ buffers/cache: 786 6697 Swap: 2055 0 2054 Anything I might be missing? Thanks in advance.

  Read the article

• Error burning DVD using Devede on Ubuntu 9.04

  - by tim-myers

  I'm trying to burn a DVD in DeVeDe under ubuntu -- on my computer it's already in DVD format (a VIDEO_TS folder) but when I try and drag it into DeVeDe it says "Some files weren't video files. None added." From looking at it, all the files look like they belong there, just from doing this a few times already and seeing all the files contained in a DVD. The file extensions in the folder are: VOB BUP IFO and the files are all named like VTS_02_1.VOB. I have tried excluding the IFO files when dragging them into DeVeDe but get the same error. Is the problem in the types of files in the DVD data or is the DVD corrupt?

  Read the article

• CD/DVD cataloging software?

  - by NoCanDo

  I'm looking for freeware, or preferably open source CD/DVD cataloging applications. Right now I'm testing http://www.gentibus.com/us/Download.htm, anyone got any other suggestions? I'd like the software to be actively maintained and not released and left behind. I'm looking for software which allows me to catalog, sort, search my DVDs/CDs into databases. Like I've 1 group of 10 dvds only with Fonts etc. I want to read the content into a Database called "Fonts'". Another group of 5 DVD's with Stockimages, and I want to read all 5 DVDs into the Database "Stock Images". Then I want this software to be able to open Database "Stock Images", I want to be able to browse DVD 1 - 5 and to see DVD 1 - 5's contents without having the DVD's in the optical drive.

  Read the article

• Why RAM and processor's capacity always display less than its actual capacity..Ex 512MB RAM shows 50

  - by Kajal

  Why RAM and processor's capacity always display less than its actual capacity..Ex 512MB RAM shows 506MB..

  Read the article

• overusage of RAM in Hypervm VPS

  - by Mac Taylor

  hey guys I have a VPS running on hypervm in proceses list i have something like this > /usr/libexec/mysqld --basedir=/usr > --datadir=/var/lib/mysql --user=mysql --pid-file=/var/run/mysqld/ user : mysql which takes 150 mb RAM and then /usr/sbin/named -u named -t /var/named/chroot user : Named 50 mb RAM taken by this process how can i solve this overusage of RAM and reduce it . I have access to root and SSH

  Read the article

• Can't burn 8.1G iso onto 8.4GB DVD - "Media does not have enough free space"

  - by Max Williams

  I'm trying to burn a dvd on a mac with an external (firewire-connected) dvd drive. I'm checking the size of the iso thus: DVD-4:dvd_files macbook$ ls -l /tmp/hybrid.iso -rw-r--r-- 1 macbook wheel 8700884992 Aug 22 10:57 /tmp/hybrid.iso DVD-4:dvd_files macbook$ ls -lh /tmp/hybrid.iso -rw-r--r-- 1 macbook wheel 8.1G Aug 22 10:57 /tmp/hybrid.iso The "human-readable" size is 8.1 Gig but when i try to burn, onto an 8.4G dual-layer dvd, it says "Media does not have enough free space" The definition of a "Gigabyte" according to Wikipedia is 1 billion bytes, so the iso size should actually be 8.7 Gig according to this definition, in which case the disk definitely isn't big enough, and it's just that the -h option to ls is misleading. Is the discrepancy just due to the ls command using a different definition of "G" (eg 1024 Meg aka 1.07 Gig? This comes out as 8.103 which fits what ls is displaying)

  Read the article

• Windows 7 doesn't recognize DVD drive

  - by adrianboimvaser

  I reinstalled Windows 7 (x64) because DVD drive stoped being recognized. At first it worked, I even got to burn a dvd. Some time later it misteriously dissapeared again. This question has been asked and answered many times on the Internet, but no proposed solution works for me. Please help! Any clues are gratefuly accepted! EDIT: I booted a live CD and succesfuly tried to burn a DVD. When I rebooted back to windows 7 the DVD drive was there. I burnt another DVD and it also works... I don't know how much it's gonna last... The drive is a TSSTcorp CDDVDW TS-L632H. FW Revision: HS02. It's parallel ATA.

  Read the article

• please take a look at my server's ram usage

  - by user66779

  Hi, i am a noob with servers. I have a centos5.5 vps with 512mb ram. My goal is to have it host just one magento store. I've installed Magento on the server without any control panel, by just installing lamp myself and whatever php extensions were necessary to get Magento to install. As soon as i visit my magento store, suddenly the ram on the vps is almost completely used, with only about 100mb left. Please see this screenshot of htop taken after just myself visited the website. http://img714.imageshack.us/img714/1944/screenouv.png As you can see there's only around 100mb left. Is that normal? I'm wondering if i might have done something stupid with the server that makes it very resource hungry. I installed apache from the centos base repo, php version 5.3 from the ius repository and mysql 5.1 also from ius repo. I haven't changed any of the default config files for any of these except to make memory_minimum 256 in php.ini. Is there anything i can do to make more ram free? I'm clueless but i see each Apache daemon is using 8% of available ram, and AFAIK each visitor needs one Apache daemon. So i would run out of ram with just a handful of visitors. Thanks for your advice.

  Read the article

• Computer won't boot from a bootable DVD

  - by JohnB

  My friend gave me his old computer that used to have WinXP on it. I'm trying to load Win7 on it and I thought there was something wrong because it wouldn't boot off a bootable disc, even though I setup the BIOS boot settings properly (I've done this sort of thing a million times). However, this closely related post helped me realize that I can boot off a bootable CD (WinXP), just not a DVD (Win7) Computer won’t boot from CD/DVD drive That might be the answer to my question, however, this motherboard is still pretty current technology. It's a good quality Gigabyte board, and judging from this product page, it came out in 2004. If I can't figure out a solution to my DVD boot problem, I'll have to try something like this: Boot and Install Windows from a USB thumb drive I guess it's possible that this motherboard doesn't allow booting from a DVD, but I still think that I might be missing something. It wouldn't be the DVD rom drive would it? I did try another drive and had the same results. However, I didn't try booting a DVD in the computer that the other test drive came out of, I'll do that later today. Any other advice? Thanks.

  Read the article

• If I install Ubuntu 12.04, will it recognize all of my RAM?

  - by user91048

  I have a question that's been bugging me since a long time. A friend of mine told me that when he had Ubuntu 11.10 installed the OS only recognized 3.4GB instead of 8GB. In the next week I'll be buying a new computer and I'll have 8GB of RAM, does the Video Card need to have it's own video memory for the OS to recognize the RAM entirely?. If you could give me some advise on how to configure my PC before I buy it it would be great. Thanks. Tengo una duda que me ronda de hace tiempo. Un amigo mio me comento que con ubuntu 11.10 tenia 8 gb de RAM y que solo le reconocia 3.4. Dentro de unos 5 dias me comprare un ordenador nuevo a base de componentes y voy a meterle 8 gb de RAM. ¿Hace falta que la tarjeta gráfica tenga Gb dedicados para que el sistema me reconozca la RAM entera? Si podeis darme algunos consejillos sobre como configurar el PC antes de comprarmelo para que ese problema no me pase, Muchisimas Gracias.

  Read the article

• How can I run a complete application from RAM?

  - by pico

  When I do some stuff in background (unpacking, compiling, backup, etc.) my hdd is under load and for example, Firefox and Chromium take very long to start and react very slow. While my hdd is under load I have still plenty of free RAM and free CPU. How can I copy the whole Firefox or Chromium including all dependencies into RAM? I don't care about persistence, I just want to view some websites, videos, etc. There are instructions putting the cache into /dev/shm, but that didn't speed up so much. Getting the profile into the RAM drive might also be easy... But how to get the binaries with all dependencies into RAM?

  Read the article

• MySQL reserves too much RAM

  - by Buddy

  I have a cheap VPS with 128Mb RAM and 256Mb burst. MySQL starts and reserves about 110Mb, but uses not more than 20Mb of them. My VPS Control Panel shows, that I use 127Mb (I also running nginx and sphinx), I know, that it shows reserved RAM, but when I reach over 128Mb, my VPS reboots automatically every 4 hours. So I want to force MySQL to reserve less RAM. How can i do that? I did some tweaks with my.conf but it helped not so much. top output: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1 root 15 0 2156 668 572 S 0.0 0.3 0:00.03 init 11311 root 15 0 11212 356 228 S 0.0 0.1 0:00.00 vzctl 11312 root 18 0 3712 1484 1248 S 0.0 0.6 0:00.01 bash 11347 root 18 0 2284 916 732 R 0.0 0.3 0:00.00 top 13978 root 17 -4 2248 552 344 S 0.0 0.2 0:00.00 udevd 14262 root 15 0 1812 564 472 S 0.0 0.2 0:00.03 syslogd 14293 sphinx 15 0 11816 1172 672 S 0.0 0.4 0:00.07 searchd 14305 root 25 0 7192 1036 636 S 0.0 0.4 0:00.00 sshd 14321 root 25 0 2832 836 668 S 0.0 0.3 0:00.00 xinetd 15389 root 18 0 3708 1300 1132 S 0.0 0.5 0:00.00 mysqld_safe 15441 mysql 15 0 113m 16m 4440 S 0.0 6.4 0:00.15 mysqld 15489 root 21 0 13056 1456 340 S 0.0 0.6 0:00.00 nginx 15490 nginx 18 0 13328 2388 992 S 0.0 0.9 0:00.06 nginx 15507 nginx 25 0 19520 5888 4244 S 0.0 2.2 0:00.00 php-cgi 15508 nginx 18 0 19636 4876 2748 S 0.0 1.9 0:00.12 php-cgi 15509 nginx 15 0 19668 4872 2716 S 0.0 1.9 0:00.11 php-cgi 15518 root 18 0 4492 1116 568 S 0.0 0.4 0:00.01 crond MySQL tuner: >> MySQLTuner 1.0.1 - Major Hayden <[email protected]> >> Bug reports, feature requests, and downloads at http://mysqltuner.com/ >> Run with '--help' for additional options and output filtering Please enter your MySQL administrative login: root Please enter your MySQL administrative password: -------- General Statistics -------------------------------------------------- [--] Skipped version check for MySQLTuner script [OK] Currently running supported MySQL version 5.0.77 [OK] Operating on 32-bit architecture with less than 2GB RAM -------- Storage Engine Statistics ------------------------------------------- [--] Status: -Archive -BDB -Federated +InnoDB -ISAM -NDBCluster [--] Data in InnoDB tables: 1M (Tables: 1) [OK] Total fragmented tables: 0 -------- Performance Metrics ------------------------------------------------- [--] Up for: 38m 43s (37 q [0.016 qps], 20 conn, TX: 4M, RX: 3K) [--] Reads / Writes: 100% / 0% [--] Total buffers: 28.1M global + 832.0K per thread (100 max threads) [OK] Maximum possible memory usage: 109.4M (42% of installed RAM) [OK] Slow queries: 0% (0/37) [OK] Highest usage of available connections: 1% (1/100) [OK] Key buffer size / total MyISAM indexes: 128.0K/64.0K [OK] Query cache efficiency: 42.1% (8 cached / 19 selects) [OK] Query cache prunes per day: 0 [!!] Temporary tables created on disk: 27% (3 on disk / 11 total) [!!] Thread cache is disabled [OK] Table cache hit rate: 57% (8 open / 14 opened) [OK] Open file limit used: 1% (12/1K) [OK] Table locks acquired immediately: 100% (22 immediate / 22 locks) [!!] Connections aborted: 10% [OK] InnoDB data size / buffer pool: 1.5M/8.0M -------- Recommendations ----------------------------------------------------- General recommendations: MySQL started within last 24 hours - recommendations may be inaccurate Enable the slow query log to troubleshoot bad queries When making adjustments, make tmp_table_size/max_heap_table_size equal Reduce your SELECT DISTINCT queries without LIMIT clauses Set thread_cache_size to 4 as a starting value Your applications are not closing MySQL connections properly Variables to adjust: tmp_table_size (> 32M) max_heap_table_size (> 16M) thread_cache_size (start at 4) I think if I do what MySQLtuner says, MySQL will use more RAM.

  Read the article

• Maximum RAM on Biostar P4M8PM7 Socket775 mATX board

  - by Alex Balashov

  I have a server with a Biostar P4M8PM7 ("Pro-M7") board based on a VIA chipset. It's a strange board to put in a server because it seems like more of a desktop board to me, but alas! It takes DDR2-667 (PC5300) RAM. What I can't figure out is the maximum amount I can put in it, as I cannot find the manual anywhere online. I've found a few marketing broadsheets from online retailers that say, "up to 2 GB of RAM!" but I am not sure whether to believe them. They also do not seem to be quite for the same board, as they indicate DDR2 400/533 RAM, for example: http://www.geeks.com/details.asp?invtid=P4M8P-M7. The manufacturer's web site says the same thing, but does not elaborate. It's a 64-bit CPU and board; is there a technical reason why the board would not be able to address more than 2 GB? Can someone tell me what sort of that reason that would be? I bought this server from someone really hoping I could put 8 to 16 in it, and wanted to do some research before I gave up. On a related note, it's not indicated anywhere whether it can take ECC RAM; the existing chips are not ECC, but most memory sold in the range I'm looking for (e.g. DIMMs with enough chip density to do 8 GB) seems to be server-class and for that reason ECC. Any ideas? Thank you very much for your consideration in advance!

  Read the article

• after building in more ram, bios/debian does nothing [closed]

  - by derty

  My private server has 2x1gb Ram working with a 64bit Debian and an Q6600 Intel. This runs 2 virtual mashines on it each one recives 512mb RAM. Which you can immagine is a bit tight for the hole system. Now i got 2x2gb ram from a friend. I'm not sure if thery are clocking at the same speed, but i'm sure my power adaptor is not on his limit and can handle that. So there are 2 ram sockets left at the mainboard. I shuted down the system and build in the 4 gigs and looked what happen. After pressing the start button, everything gets noisy as known BUT the screen shows nothing, not even the bios stuff it usally does. Why isn't the system booting? I can immagine that it does not direkt link between booting debian and the bios not showing a thing. Or is it Grub? I mounted the system disk, and i can see it, switch folders write stuff with "vim" it does not seems like there is a problem.

  Read the article

• MacBookPro RAM: CL7 or CL9

  - by chris_l

  Hi, I want to increase the RAM in my MacBookPro 15", 2.53 GHz, Mid-2009. I currently have 4GB, and I want 6GB (and upgrade to 8GB later - I think this should work with my model: http://forums.macrumors.com/showthread.php?t=573906) Now I see two offers: 1x4GB DDR3 1333 CL9 9-9 (149 EUR) 1x4GB DDR3 1066 CL7 7-7 (192 EUR). Both are from the same brand (Transcend), both are labeled "For MacBook/MacBookPro". Now I have no idea, which of these would work better with the 2GB RAM module from my currently installed memory (Running at 1067 MHz, according to System Profiler - but with what CL setting?) Would the 1333 CL9 RAM be set to CL7 when running at 1066 MHz? Thanks, Chris PS Should I expect problems when I later upgrade to 8GB with a different module (in case the same module won't be produced anymore)?

  Read the article

• ASUS P6X58D and 12 GB of RAM

  - by Hunter

  I just assembled my new PC and it screams, BUT it's only recognizing 8 GB of RAM in BIOS and OS rather than the installed 12 GB. In the BIOS the RAM was registering at 1066 MHz so I set it to 1600 MHz. I updated the BIOS to the latest non-beta release. http://www.asus.com/product.aspx?P_ID=wurRaDZ8lo4Ckukj OS: Windows 7 Ultimate 64-bit Motherboard: ASUS P6X58D Premium CPU: Intel Core i7 920 RAM: CORSAIR XMS3 12 GB (6 x 2 GB) 240-Pin DDR3 SDRAM DDR3 1600 HDD: Intel 80 GB SSD SATA II Power supply: Kingwin 1000 W Modular I've installed the Beta BIOS 0808 but no luck!

  Read the article

• Asus P6X58D & 12GB of RAM

  - by Hunter

  I just assembled my new PC and it screams, BUT it's only recognizing 8GB of ram in BIOS and OS rather than the installed 12GB. In the BIOS the RAM was registering at 1066 so I set it to 1600MHz. I update the BIOS to the latest non-beta release. http://www.asus.com/product.aspx?P_ID=wurRaDZ8lo4Ckukj OS = Windows 7 Ultimate 64-bit Mobo = Asus P6X58D Premium CPU = Intel Core i7 920 RAM = CORSAIR XMS3 12GB (6 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 HDD = Intel 80GB SSD SATA II PS = Kingwin 1000W Modular I've installed the Beta BIOS 0808 but no luck!

  Read the article

• Database server: Small quick RAM or large slow RAM?

  - by Josh Smeaton

  We are currently designing our new database servers, and have come up with a trade off I'm not entirely sure of how to answer. These are our options: 48GB 1333MHz, or 96GB 1066MHz. My thinking is that RAM should be plentiful for a Database Server (we have plenty and plenty of data, and some very large queries) rather than as quick as it could be. Apparently we can't get 16GB chips at 1333MHz, hence the choices above. So, should we get lots of slower RAM, or less faster RAM? Extra Info: Number of DIMM Slots Available: 6 Servers: Dell Blades CPU: 6 core (only single socket due to Oracle licensing).

  Read the article

• Best 2x 4GB RAM for a Thinkpad X200s

  - by Tommy Jakobsen

  Hi, I need 2x 4GB RAM, a total of 8GB, in my upcoming Thinkpad X200s laptop. Before buying, I would like your advice on which modules to choose. I've been looking at Corsair's Value Select (P/N: CM3X4GSD1066) RAM, because in my experience they produce good RAM modules. However, Corsair lists 7 clock cycles for their modules while Lenovo lists 5 clock cycles. What do you think? Is Lenovo modules the best choice? Are they the fastest/most stable, or is it the Corsair modules? Or modules from a third vendor? Thanks in advance!

  Read the article

• Mixing RAM brands

  - by Andy

  Hey guys, I'm scheduled to install a server at a colo facility tomorrow, but I've hit a snag. ESXi doesn't like the fact that I have 12GB ram in my server (8gb on one side of CPU, 4gb on the other). I currently have 3xCrucial 4gb ECC DDR3 1333mhz sticks (http://www.amazon.com/gp/product/B001TGT7EE/ref=oss_product) and I'm planning on stopping by Fry's on the way to the colo facility so I can pick up another stick so that ESXi will install. Problem is, Fry's doesn't stock Crucial RAM. They do have a stick that I think is identical to my crucial one: http://www.frys.com/product/5915524?site=sr:SEARCH:MAIN_RSLT_PG Will this be dangerous to use in my server? The specs on the RAM are the same as far as I know (ecc registered, 1333mhz, ddr3, 4gb).

  Read the article

• Motherboard RAM question.

  - by winterwindz

  Firstly I'm new at this. Not a very computer-ish person. So I very much apologize if this is not the right place, but here it goes.. My Motherboard is an Asus P5LD2-SE. I'm running in Win 7 Ultimate 32-bit(x86) OS, 1GB RAM (2x512 MB). I'm planning to upgrade my OS to 64-bit and because I know my Motherboard is a dual-channel, I bought a dual-channel 2 GB RAM (2 pcs). My question is; am I still able use my old RAM ones, since it is 4 slots..? Which in the end will show 5GB. Is it possible? Thank you for your time. =)

  Read the article

• How much RAM on a windows VPS (2003, 2008, 2008R2)

  - by Pietro

  Right now I'm running Windows Server 2003 on a VPS with 640mb RAM and it works fine. I would like to upgrade OS to Windows Web Server 2008 or Windows Web Server 2008 R2. I understand that it is difficult to say how much RAM is needed, but can you make a comparison between 2003 and the two new 2008 versions? RAM on VPS is by far the most expensive item, so I wonder if I can get similar performances with 1GB and 2008 or 2008R2 compared to 640MB and 2003. Basically I run IIS, SQL Server and MailEnable.

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >