Search Results

Search found 343 results on 14 pages for 'lenny marnham'.

Page 5/14 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Can my PowerMac G3 B&W really take a harddrive larger than 128GB?

    - by Josh Calvetti
    So it's a well known fact that the PowerMacs manufactured before 2002 cannot take a harddrive larger than 128GB. I have an old B&W that was running 10.4, and upon putting a 250GB drive inside, it told me that I had inserted a 128GB. That was expected. However, I recently decided to turn that machine into a Debian home file server. I shoved the 250GB drive inside, did some formatting, and now it tells me that it is a 250GB drive. Is this safe to use? Will all my data go corrupt after I've added more than 128GB of stuff? In case the specs are helpful to have, it's a 400MHz B&W, 1GB RAM, Rev. B.

    Read the article

  • Nagios3 gives a warning on HTTP service monitoring

    - by Dez
    Already set up my local net configuration to be monitored by Nagios3. I found a problem that Nagios3 reports a warning in the HTTP monitoring service of a Debian server set at ip 192.168.1.52, that has an individual virtual host and a mass virtual host for application development. I get this status message: HTTP WARNING: HTTP/1.1 404 Not Found I used the Nagios tools to check. servername is the name of the vhost server name I used in the Apache configuration. /usr/lib/nagios/plugins/check_http -H servername -I 192.168.1.52 receiving this status message: HTTP OK HTTP/1.1 200 OK - 37900 bytes in 0.504 seconds |time=0.503946s;;;0.000000 size=37900B;;;0 But when I check like this: /usr/lib/nagios/plugins/check_http -I 192.168.1.52 I get the same status message as the warning, so I assume that I don't have Nagios completely well set up because doesn't recognize the vhosts for that server, how it should be as the check_http service shows. Where should I look to fix that warning?

    Read the article

  • Sending email with exim and extrnal sender address

    - by Tronic
    hi. i have following problem: i want to send emails with an rails webapp. i set up an exim server and when looking into the logs, the sending works, but the emails aren't sent really. i had the same problem with another isp. the sender address is hosted on another mailserver, other isp. i think the problem is, that sending doesn't work because the sener address isn't hosted on the same server. do you have any advice on this? the logs (exim) tell me the following: 2011-01-01 14:38:06 1PZ1eo-0000Ga-38 <= <> R=1PZ1eo-0000GY-1p U=Debian-exim P=local S=1778 2011-01-01 14:38:08 1PZ1eo-0000Ga-38 => [email protected] R=dnslookup T=remote_smtp H=mx1.emailsrvr.com [98.129.184.131] X=TLS1.0:RSA_AES_256_CBC_SHA1:32 DN="C=US,O=mx1.emailsrvr.com,OU=GT21850092,OU=See www.geotrust.com/resources/cps (c)08,OU=Domain Control Validated - QuickSSL(R),CN=mx1.emailsrvr.com" 2011-01-01 14:38:08 1PZ1eo-0000Ga-38 Completed [email protected] is the external sender-address! thank you!

    Read the article

  • /dev/fuse "permission denied" even when member of fuse group

    - by steeef
    I have a backup script scheduled on a Debian 5.0 x86 server, via sshfs. However, when I attempt to mount the remote directory, I receive: failed to open /dev/fuse: Permission denied ls -l /dev/fuse returns: crwxrwxr-x 1 root fuse 10, 229 2010-11-12 09:08 /dev/fuse id backup returns: uid=501(backup) gid=501(backup) groups=501(backup),46(plugdev),108(fuse) The only way I can get the directory to mount is if I run chmod a+w /dev/fuse, but this is reset at some point during the day. It's a kludge though, and I'd rather figure out why the group permissions aren't working.

    Read the article

  • Apt-Get "sources.list needs at least 1 source-URI" error when building dependecies for Xen

    - by Entity_Razer
    What i'm trying to do is install Xen in a test environment, now I am trying to run the: apt-get build-dep xen-3.3 command, but it keep throwing a error which literally translated from dutch (installed the debian OS in Dutch) say's: E: your sourcelist (/etc/apt/sources.list) has to contain at least 1 source-URI I've googled it but I can't seem to find a definitive solid answer on how to fix this. By default a source-URI (read man page of apt-get) states it needs to be something along the lines of deb ftp://ftp.debian.org/debian stable contrib Now I've got 2 HTTP sources (default Debian ones) up & running so far and they've been working flawlessly for the better part of a few days now. Only now its starting to act up. Anyone able to help me out ? Much obliged !

    Read the article

  • Sending email with exim and external sender address

    - by Tronic
    i have following problem: i want to send emails with an rails webapp. i set up an exim server and when looking into the logs, the sending works, but the emails aren't sent really. i had the same problem with another isp. the sender address is hosted on another mailserver, other isp. i think the problem is, that sending doesn't work because the sener address isn't hosted on the same server. do you have any advice on this? the logs (exim) tell me the following: 2011-01-01 14:38:06 1PZ1eo-0000Ga-38 <= <> R=1PZ1eo-0000GY-1p U=Debian-exim P=local S=1778 2011-01-01 14:38:08 1PZ1eo-0000Ga-38 => [email protected] R=dnslookup T=remote_smtp H=mx1.emailsrvr.com [98.129.184.131] X=TLS1.0:RSA_AES_256_CBC_SHA1:32 DN="C=US,O=mx1.emailsrvr.com,OU=GT21850092,OU=See www.geotrust.com/resources/cps (c)08,OU=Domain Control Validated - QuickSSL(R),CN=mx1.emailsrvr.com" 2011-01-01 14:38:08 1PZ1eo-0000Ga-38 Completed [email protected] is the external sender-address! thank you! Edit with more details when sending a mail from command line with echo "Test" | mail -s Testmail [email protected] the logs says 2011-01-01 20:45:24 1PZ7OG-0001Vp-Rx <= root@gustav U=root P=local S=360 2011-01-01 20:45:26 1PZ7OG-0001Vp-Rx => [email protected] R=dnslookup T=remote_smtp H=gmail-smtp-in.l.google.com [209.85.229.27] X=TLS1.0:RSA_ARCFOUR_MD5:16 DN="C=US,ST=California,L=Mountain View,O=Google Inc,CN=mx.google.com" 2011-01-01 20:45:26 1PZ7OG-0001Vp-Rx Completed and i get the mail on my gmail account. but when sending by webapp (when testing locally with sendmail it works fine) i only get this log output 2011-01-01 20:50:08 1PZ7Sq-0001X9-L4 <= <> R=1PZ7Sq-0001X7-Jo U=Debian-exim P=local S=1780 2011-01-01 20:50:11 1PZ7Sq-0001X9-L4 => [email protected] R=dnslookup T=remote_smtp H=mx1.emailsrvr.com [98.129.184.3] X=TLS1.0:RSA_AES_256_CBC_SHA1:32 DN="C=US,O=mx1.emailsrvr.com,OU=GT21850092,OU=See www.geotrust.com/resources/cps (c)08,OU=Domain Control Validated - QuickSSL(R),CN=mx1.emailsrvr.com" 2011-01-01 20:50:11 1PZ7Sq-0001X9-L4 Completed

    Read the article

  • mount error 5 = Input/output error

    - by alharaka
    I am running out of ideas. After a long period of testing this morning, I cannot seem to get this to work, and I have no idea why. I want to mount a Windows SMB/CIFS share with a Debian 5.0.4 VM, and it is not cooperating. This the command I am using. debianvm:/home/me# whoami root debianvm:/home/me# smbclient --version Version 3.2.5 debianvm:/home/me# mount -t cifs //hostname.domain.tld/share /mnt/hostname.domain.tld/share --verbose -o user=SUBADDOMAIN.ADDOMAIN.DOMAIN.TLD/username mount.cifs kernel mount options: unc=//hostname.domain.tld\share,ip=10.212.15.53,domain=SUBADDOMAIN.ADDOMAIN.DOMAIN.TLD,ver=1,rw,user=username,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,pass=*********mount error 5 = Input/output error Refer to the mount.cifs(8) manual page (e.g.man mount.cifs) debianvm:/home/me# The word on the nets has not been very specific, and unfortunately it is almost always environment-specific. I receive no authentication errors. I have tried mount -t smbfs and mount -t cifs, along with smbmount and such. I get the same error before. I doubt it is a problem with DNS resolution, because logging shows the correct IP address. dmesg | tail -f no longer shows authentication errors when I format the domain and username accordingly. I have played a little with iocharset=utf8, file_mode, and dir_mode as described here. That did not help either. I have also tried ntlm and ntlmv2 assuming it might be a minimum auth method problem, but not forcing sec=ntlmv2 it can still authenticate without errors anymore. smbclient -L hostname.domain.tld -W SUBADDOMAIN.ADDOMAIN.DOMAIN.TLD -U username correctly lists all the shares and shows it as the following. Domain=[SUBADDOMAIN] OS=[Windows 5.0] Server=[Windows 2000 LAN Manager] Sharename Type Comment --------- ---- ------- IPC$ IPC Remote IPC ETC$ Disk Remote Administration C$ Disk Remote Administration Share Disk Connection to hostname.domain.tld failed (Error NT_STATUS_CONNECTION_REFUSED) NetBIOS over TCP disabled -- no workgroup available I find the last line intriguing/alarming. Does anyone have any pointers!? Maybe I misread the effin manual.

    Read the article

  • How to make an ISO copy of Linux-filesystem and user files of VPS Debian based?

    - by moogeek
    Hello! I have a Debian-Based VPS on some hosting. I want to migrate from it and i need to make a full copy of all Linux-filesystem (and installed packages) + all home directory with website files. And then pack/convert it to ISO image so that to use it on cloud hostings like Amazon. The problem is that i have only ssh root access. Hosting support can't do that for me. Another part of the question - is it possible to enlarge the Linux-filesystem by not re-installing it and using the free space of home directory? Is it possible to do? I guess it is possible with rsync or something like that. Will my Mysql databes copy together with all other data? Thanks in advance!

    Read the article

  • Sending email with exim and external sender address

    - by Tronic
    hi. i have following problem: i want to send emails with an rails webapp. i set up an exim server and when looking into the logs, the sending works, but the emails aren't sent really. i had the same problem with another isp. the sender address is hosted on another mailserver, other isp. i think the problem is, that sending doesn't work because the sener address isn't hosted on the same server. do you have any advice on this? the logs (exim) tell me the following: 2011-01-01 14:38:06 1PZ1eo-0000Ga-38 <= <> R=1PZ1eo-0000GY-1p U=Debian-exim P=local S=1778 2011-01-01 14:38:08 1PZ1eo-0000Ga-38 => [email protected] R=dnslookup T=remote_smtp H=mx1.emailsrvr.com [98.129.184.131] X=TLS1.0:RSA_AES_256_CBC_SHA1:32 DN="C=US,O=mx1.emailsrvr.com,OU=GT21850092,OU=See www.geotrust.com/resources/cps (c)08,OU=Domain Control Validated - QuickSSL(R),CN=mx1.emailsrvr.com" 2011-01-01 14:38:08 1PZ1eo-0000Ga-38 Completed [email protected] is the external sender-address! thank you!

    Read the article

  • Is there a "standard" way to make daemon in Debian?

    - by Kuroki Kaze
    I need to create a daemon from the application in Debian. Is there any standard tool for this in Debian like "upstart" in Ubuntu? I need only start-stop commands, to start a program as a daemon with some options and a pid file and kill it with pid file. I looked at init.d but it seems these are for boot-time launch. I want to start my daemon manually.

    Read the article

  • Can't set up Usermin correctly to allow users to login outside of local network, what am I missing?

    - by thecraic
    I'm fairly new at creating a server, but the biggest problem I am currently having at the moment is getting Usermin set up to be accessible from outside the LAN. I talked to other people that use it and was told that all I need to do is type the url:20000 to access the login screen, but that doesn't work. I have also tried the ip:20000 and that doesn't lead to anything. Instead I get the error message: Error - Bad Request This web server is running in SSL mode. Try the URL https://hostname:10000/ instead. (where hostname is my server's hostname) I know it must be a configuration issue, but I have checked all my settings and as far as I can tell I don't have the ports blocked anywhere. I have the correct ports forwarded on my router and my server firewall doesn't have the port block either. Is there anything I am missing? Any help would be appreciated and I will add more information upon request. Thank You.

    Read the article

  • Log Problem and bash script

    - by GvWorker
    Hello Guys, I have 11 Debian servers running on rackspace cloud hosting. All running VHCS2 for hosting management. 1 server is used for application and 10 are used for only smtp. My question is regarding smtp servers. Each server hosted 1 domain. My problem is when my client use smtp there's a log created in this directory /var/log/ but within 24 hours drives are full and server refuse all smtp connections. Then I deleted the logs and ran following command to check the disk space. df -h but it shows hdd still full and server is still refusing the smtp connections. Then I ran following command to see the truth du --max-depth=1 -h It shows the truth. The real disk space used. Then I rebooted the server and now server working fine. But after few hours same situation happened. Then I created the following script. #!/bin/sh rm -fr /var/log/* rm -fr /var/log/apache2/*.log rm -fr /var/log/apache2/*.log.* rm -fr /var/log/apache2/users/* rm -fr /var/log/apache2/backup/* reboot It worked for days but after that logs are again filling the hdd. Now I want the following solutions. If anybody can help me. When I delete files from server hdd will free up without rebooting Log should be in specific range. Like a specific size of file where old data overwrite with new data

    Read the article

  • permissions destroyed

    - by n00b32
    yes yes i know im stupid but while i was veeeery late i tried to fix one thing asap and ended up doing chmod 777 -R /* it chmoded dr-xr-xr-x 2 root root 4096 2011-02-15 13:12 bin drwx------ 3 root root 4096 2010-09-07 15:57 boot d-wx-wx-wx 15 root root 13680 2010-12-11 05:48 dev drwx------ 3 root root 4096 2010-09-09 05:24 emul d-wx-wx-wx 110 root root 4096 2011-03-07 07:12 etc drwx------ 2 root root 4096 2010-09-10 04:35 firewall because of spelling mistake... can some send me a tree of permissions for those on debian so ill have a lot less work ? is there another way i can fix them ?

    Read the article

  • Why do some servers have so many processes running?

    - by Xeoncross
    I have two VPS servers but they have drastically different amounts of memory usage and processes running. I'm still new to running linux servers so I'm having trouble figuring out what is going on and what I can do to fix it. Both are Debian 5 32bit installs. On one server with 128MB of ram and a single CPU core I have a full server running in only 84MB of RAM. The other server has 512MB (quad core CPU) and it has nothing running but core processes yet its still using 94MB of RAM. Does one have a different kind of virtualization technology that requires more linux core processes or what?

    Read the article

  • How do I install MySQLdb on a Python 2.6 source build, on Debian Lenny?

    - by nbolton
    I've installed Python 2.6 from source on my Debian Lenny server, as Lenny does not have the python2.6 package. So, my Python 2.5 has MySQLdb installed and working just fine because I installed the python-mysqldb package. I figured I could just install MySQLdb from source, but because I have the Lenny python-dev package, it builds against 2.5: # python setup.py build running build running build_py copying MySQLdb/release.py -> build/lib.linux-x86_64-2.5/MySQLdb running build_ext building '_mysql' extension gcc -pthread -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -fPIC -Dversion_info=(1,2,3,'final',0) -D__version__=1.2.3 -I/usr/include/mysql -I/usr/include/python2.5 -c _mysql.c -o build/temp.linux-x86_64-2.5/_mysql.o -DBIG_JOINS=1 -fPIC gcc -pthread -shared -Wl,-O1 -Wl,-Bsymbolic-functions build/temp.linux-x86_64-2.5/_mysql.o -L/usr/lib/mysql -lmysqlclient_r -o build/lib.linux-x86_64-2.5/_mysql.so I don't want to run python setup.py install, because I'm afraid it's going to screw up MySQLdb on 2.5 -- should I? I imagine it'd just overwrite 2.5 and do nothing to 2.6 -- maybe there's an argument I can use to install to 2.6? I imagine that I would need also to build against 2.6, so how do I do this?

    Read the article

  • Swiftfox(A variant of Firefox i.e getswiftfox.com ) is taking ages to load in Debian Lenny.

    - by unixbhaskar
    As I mentioned the problem in the Title line..so no stating here once more.I have been using swiftfox for all other partition os without any problem i.e it works flawlessly on Arch,Fedora,Gentoo( my other OSes) ..but giving trouble in Debian Lenny.... Not yet find any clue. Please throw some light on it.The point is that I have had periodically prune swiftfox/firefox internal database; as well as upgrade and update empirically . I am bemused with this problem in Debian Lenny. Cheers! Bhaskar

    Read the article

  • Where to find URLs for sources.list for debian for running apt-get update?

    - by Boda Cydo
    Can anyone tell me where to find URLs to put in /etc/apt/sources.list for debian so that I could run apt-get update? I couldn't find the precise answer by searching Google. When I currently try running apt-get update I get: W: Failed to fetch ftp://ftp.debian.org/debian/dists/lenny/contrib/binary-i386/Packages Unable to fetch file, server said 'Failed to open file. ' [IP: 130.89.148.12 21] W: Failed to fetch ftp://ftp.debian.org/debian/dists/lenny/non-free/binary-i386/Packages Unable to fetch file, server said 'Failed to open file. ' [IP: 130.89.148.12 21] I have no idea how to solve this. Here is how my current sources.list looks like: deb ftp://ftp.debian.org/debian lenny main contrib non-free deb-src ftp://ftp.debian.org/debian lenny main contrib non-free deb ftp://ftp.debian.org/debian lenny/updates main contrib non-free deb-src ftp://ftp.debian.org/debian lenny/updates main contrib non-free I'm running debian_version 5.0.8: # cat /etc/debian_version 5.0.8 Thanks!

    Read the article

  • Is there a version of Debian-Lenny that is legal for export from the US?

    - by molecules
    I wanted to bundle my application in a Debian-Lenny Virtual Machine so others could download it and run it without having to configure anything. However, I don't want to have to worry about US legal issues. Many of the packages in a default Debian installation include encryption algorithms. Are all default versions export-safe?    If not, is there an export-safe version?       If not, is there an easy way to make one?

    Read the article

  • Is there a version of Debian-Lenny that is legal for export from the US?

    - by molecules
    I wanted to bundle my application in a Debian-Lenny Virtual Machine so others could download it and run it without having to configure anything. However, I don't want to have to worry about US legal issues. Many of the packages in a default Debian installation include encryption algorithms. Are all default versions export-safe?    If not, is there an export-safe version?       If not, is there an easy way to make one?

    Read the article

  • Is there a debian lenny patch to allow apt-get to work with sftp?

    - by MiniQuark
    I would like to write things like this in /etc/apt/sources.list: deb sftp://[email protected]/path other stuff When I try this, apt-get complains that there is no sftp method for apt: # apt-get update E: The method driver /usr/lib/apt/methods/sftp could not be found. Has anyone written a patch to add the sftp method for apt? All I could find in Google was this spec for Ubuntu. Thanks for your help.

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >