Search Results

Search found 28747 results on 1150 pages for 'switch case'.

Page 5/1150 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12 | Next Page >

PC case and PSU screw question....

- by user32569

Hi, I have maybe a funny one to ask.... To this Christmass I bought new PC. When I started to asseble it, I found that my case (Artic Cooling Silentium T11) has 12 screws for HDD, DVD etc, and 6 screws for the expansion cards. Well, first thing that surprised me was, why only 6 screws for expansion card, when case has actually 7 slots. And second, what are PSU screws supposed to some with? The PSU, Case or nothing? Becouse neighter PSU or Case had them. PSU is Evolve Storm 600W. Well, I know case and PSU are not some high end devices, but still, would it hurt them to add 1 screw for expansion cards and 4 for PSU? So, my question is, is this situation normall, or which one (Case or PSU) does normally screws come with? Thanks.

Read the article
MRTG: Switch Port Throughput

- by amazinghorse24

I currently have MRTG running in a Debian box. It currently polls a Netgear Switch for the speeds of 7 or so ports and then makes the graphs of them. It currently only records the bits/sec. I would like to set up MRTG to record and display the total amount of data that has gone through the port, not just the speed of it. I am somewhat new to MIBS and SNMP and so I need some help. The switch is a Netgear GS748AT and am not quite sure where to find the MIBS for it, or which MIBS I need to accomplish my task. Any and all help is appreciated!

Read the article
How to route local traffic over switch?

- by Franz Kafka

I'm just cabled up at home but haven't got any way of verifying that gigabit speed can be reached. As I've only got one laptop with one network card, one cable, and one switch, I'm kind of stuck. I'm using a tool that you can start as a server or as a client to send data from one box to another. I would like to send and receive on the same Windows box. I guess if I use my network local IP address, my Windows 8.1 PC will just route traffic internally. Is there some way of forcing the traffic to go to the switch and back again?

Read the article
Teaming/Spanning Switch Ports

- by KTech

I like to team NICs on my servers. Since most workstations are giga-bit anymore I want to provide my servers a bit more bandwidth. I've read various things that say I am/am not supposed to bond the ports on the switch. I see benefit in doing it as I'm not sure how the switch ARP table handles the same MAC address on multiple ports. Suggestions on the "ideal" way to do it? If it matters, I have mix (various locations) of Dell and HP, web managed, Layer 2 switches. Servers are mostly Dell with Broadcom NICs.

Read the article
Looking for a virtual switch for windows

- by DawnOfLight

I'm looking for a virtual switch for windows, just like vde (http://vde.sourceforge.net/). thx.

Read the article
Strange behavior of Switch Case statement in Java

- by supernova

I understand that Java switch case are designed this way but why is this behavior in Java int x = 1; switch(x){ case 1: System.out.println(1); case 2: System.out.println(2); case 3: System.out.println(3); default: System.out.println("default"); } output : 1 2 3 default My question is why case 2 and 3 are executed? I know I omitted break statement but x was never 2 or 3 but case 2 and case 3 still executes?

Read the article
Is it possible to run an ng-switch directly on a select > option

- by Asok

Has anyone been able to run an ng-switch on a <select> -> <option> tag, like so?: <select ng-model="form.permitLocality" ng-switch on="localityTypeRadio"> <option ng-switch-when="County" ng-repeat="county in countyList"> {{ county.name }} </option> <option ng-switch-when="City" ng-repeat="city in cityList"> {{ city.name }} </option> <option ng-switch-when="Town" ng-repeat="town in townList"> {{ town.name }} </option> </select> I am not getting any errors or any options (all values verified), I just thought it would save me a couple lines and thought I'd try it. Here is my selector, in case you're curious (value verified): <label class="radio inline"> <input type="radio" name="localityTypeRadio" ng-model="localityTypeRadio" value="County"> County </label> <label class="radio inline"> <input type="radio" name="localityTypeRadio" ng-model="localityTypeRadio" value="City"> City </label> <label class="radio inline"> <input type="radio" name="localityTypeRadio" ng-model="localityTypeRadio" value="Town"> Town </label> This is not a big deal, just didn't know if this was a limitation / not recommended with an ng-switch EDIT I was mistaken when I initially said that nothing was happening (browser caching), there appears to be the correct number of options but the source code shows nothing but white space: <select ng-model="form.permitLocality" class="input-block-level ng-pristine ng-valid" ng-switch="" on="localityTypeRadio" ng-hide="form.permitLocality.length"><option value="? string: ?"></option>  <option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option>  </select>

Read the article
LAN network (switch?)

- by guywhoneedsahand

I am working on setting up the network for a small LAN party (less than 16 people). Most of them do not have wireless cards in their rigs, so I need to set up some way for everyone to a) play LAN games and b) access the internet. The LAN party will probably take place in my basement, where I have enough space. However, the basement is not wired up with the router which is actually on the floor above. I make a cantenna a while back that can boost the wireless performance of my computer significantly. How can I use this to provide internet and LAN to guests? My hope was that I could use a switch like this http://www.newegg.com/Product/Product.aspx?Item=N82E16833181166 for the LAN - but how can I give people access to the internet? Is there such thing as a network extender / 16-port switch? Obviously, the internet performance doesn't need to be super stellar, because the games will be using LAN - so I am looking to provide some usable internet for web browsing, and very high speed LAN for games. Thanks!

Read the article
Configuring https access on HP A5120 Switch

- by GerryEgan

I am trying to configure HTTPS management on a HP a5120 switch running Version 5.20.99, Release 2215 and not having much luck. I have followed the manual by creating an SSL policy first and then enabling the HTTPS server with the SSL policy: ssl server-policy sslpol ip https ssl-server-policy sslpol ip https enable When I try and log onto the switch with Google Chrome I get the following error: Error 107 (net::ERR_SSL_PROTOCOL_ERROR): SSL protocol error. When I look this up I have found references to errors due to TLS being used in SSL. I can find no way to specify the SSL version in the server policy. The manual has a configuration example that uses MSCEP to retrieve a certificate but in Windows 2008 R2 that feature is only available in Enterprise and Datacentre editions which I don't have. I have SSH configured and it is using a locally generated certificate so I'm not sure if I can use that but I'd like to if possible. Has anybody been able to setup HTTPS management on HP A series switches without MSCEP? Any and all help appreciated! here is a copy of my config with the interfaces removed: version 5.20.99, Release 2215 # sysname MYSYSNAME # irf domain 10 irf mac-address persistent timer irf auto-update enable undo irf link-delay # domain default enable system # telnet server enable # vlan 1 # vlan 100 description Management # radius scheme system primary authentication 127.0.0.1 1645 primary accounting 127.0.0.1 1646 user-name-format without-domain # domain system access-limit disable state active idle-cut disable self-service-url disable # user-group system group-attribute allow-guest # local-user admin password cipher authorization-attribute level 3 service-type ssh telnet terminal service-type web # stp enable # ssl server-policy sslpol pki-domain MYDOMAIN # interface NULL0 # interface Vlan-interface199 ip address 192.168.199.140 255.255.255.0 # interface GigabitEthernet1/0/1 poe enable stp edged-port enable # interface Ten-GigabitEthernet2/1/2 # dhcp-snooping # ntp-service unicast-server 192.168.1.71 # ssh server enable # ip https ssl-server-policy sslpol ip https enable # load xml-configuration # user-interface aux 0 1 user-interface vty 0 15 authentication-mode scheme

Read the article
cheap gigabit switch for small business

- by neoice

my friend's business is currently borrowing my Adtran 1224R and is very happy with it. it's configured with a few VLANs to segment customers, internal traffic and public wifi. port 1 is a "trunk" port to the router, a chunky Linux box with iptables+NAT. they push a lot of traffic over the LAN (data backups) and really need gigabit. besides, I'd like my Adtran back :P my goal is to find a cheap(ish) switch that can function as a drop-in replacement. it looks like VLAN trunking is actually part of the 802.1q spec, so anything with VLAN support should cover the current trunk-to-router setup. it's nice to have both a web interface and SSH, but I can configure it either way if needed. things like the Netgear GS724T have caught my eye, but it seems like none of the hardware in the $300-500 range have really solid reviews. I'm concerned that "cheaper" hardware might not work for a network full of power users. does anyone have a recommendation for the Netgear GS724T or a switch that will meet my needs?

Read the article
Customize TortoiseSVN to warn to commit before switch

- by m.bagattini

I use TortoiseSVN and frequently switch between a branch and the trunk, using the switch command. I noticed that if I don't commit before the switch, local modified copy gets merged. Is there a way to customize the tool to, say, warn me to commit local changes before switch?

Read the article
rename file names from lower case to upper case

- by Adnan

Hello, I have about 2k of file that are currently in lower case like: file_one.cfr file_two.cfr .... I am searching for a fast way to rename them to upper case so they would be like; FILE_ONE.cfr FILE_TWO.cfr .... If I use from my shell; for i in *; do mv $i `echo $i | tr [:lower:] [:upper:]`; done I can get all file and the file extensions to upper case. But the extension should remain in lowercase, so my approach does not work. Any programming language is welcome.

Read the article
iPad 3 and the case for Android tablet [closed]

- by ucas

I have here a case for Android tablet of 10/10.2 inches. I want to know whether I can fit iPad 3 into that case. In fact, I am concerned about the thickness of iPad because that case got grasps which keeps the tablet steady. So, whether iPad is as slim as Android tablet? In the description of the case is written-"Compatible With Android 10" and 10.2" Tablet PCs (aPad/ePad)." What are these: aPad/ePad? Cheers

Read the article
How to switch user from a command line

- by www.openidfrance.frpszwarc

XP, Vista or Windows 7: Is there a command to use the "switch user" feature, the same way there is one to lock the workstation?

Read the article
Layer 3 switch routing

- by Yoshiwaan

I need help moving over to using our layer 3 switch as the inter vlan routing device rather than our cisco router. I've mostly got it working but I've got stuck near the end and need some advice (I think I just need a bit of education on the subject really). Cur I have a Dell PowerConnect 7048 connecting to a Cisco 1841 router. I've got a few key excerpts from the configs to provide the key information. On the powerconnect I have the following: ip routing ip default-gateway 172.31.14.1 ip route 0.0.0.0 0.0.0.0 172.31.14.1 253 ! interface vlan 1 ip address 172.31.14.254 255.255.255.0 exit interface vlan 2 ip address 172.31.19.254 255.255.255.0 exit interface vlan 4 ip address 172.31.16.254 255.255.255.0 ! interface Gi1/0/1 description 'Link to L7Router01' switchport mode trunk switchport trunk allowed vlan except 3,7-4093 exit ! and on the Cisco the following: interface FastEthernet0/0 ip address 172.31.14.1 255.255.255.0 ip nat inside ip virtual-reassembly ! interface FastEthernet0/0.2 description Accounts VLAN encapsulation dot1Q 2 ip address 172.31.19.1 255.255.255.0 ip nat inside ip virtual-reassembly ! interface FastEthernet0/0.4 description Voice VLAN encapsulation dot1Q 4 ip address 172.31.16.1 255.255.255.0 ip nat inside ip virtual-reassembly ! So what I'm doing is moving clients over so that their default gateway is a 172.31.x.254 address rather than a 172.31.x.1 address. This works great for inter-vlan routing, I have no issues with this. The switch can also access the router no worries, and users on the 172.31.14.0/24 network can access all interfaces and sub-interfaces on the router, including 172.31.14.1. They can also access all of the interfaces that the router connects off to, no worries there. The problem I have is that users on the 172.31.16.0/24 and 172.31.19.0/24 subnets cannot access either 172.31.14.1 or any of the subnets the router connects to. They can, however, connect to BOTH of the sub interfaces on the router from either subnet. What am I missing here? Why can't the vlans connect to the non-sub interface on the router? Are tagged packets being sent to this interface?

Read the article
Router, switch configuration in linux

- by Algorist

Hi, Can someone suggest a good back for router and switch configuration in linux. I also want to configure dhcp, dns and other stuff. Regards Bala

Read the article
Can I connect a switch to a router?

- by jasondavis

Ok sorry if this is the most basic question in the world but for years I have needed more ethernet ports in my room and my whole house is wired with 1 ethernet port in each room, I also wanted to be able to plug into the room ethernet port with another router to get more plugins and that wasn't possibe I don't think. So can you plug a switch into this and have more ports with just as much speed?

Read the article
RV042 - switch needed

- by David

I have a Cisco RV042 4-port but unfortunately I ran out of ports and I need to connect 2 more servers to it. I'm planning to get a SOHO switch, but I would like some recommendations before getting one. I was thinking a Dell PowerConnect. Any ideas will be appreciate it.

Read the article
Connecting to a switch?

- by Kravlin

I have a managed switch that i liberated from our school's surplus goods store for $10 that has a serial based console. I have a serial cable and a computer with a serial port, but i have no idea what protocal to use to connect between the two. I'm running Arch Linux on the computer with the serial port. Thanks

Read the article
Looking for an unmanaged 4/8-port GBit Ethernet switch with a GBIC port

- by Aaron Digulla

I'm looking for a simple unmanaged switch with 4-8 GBit Ethernet ports and a fiber port (either as a GBIC slot or pre-installed with a 1000BASE-SX port). Anything you can recommend?

Read the article
Simple switch ports state monitoring tool

- by Florent Courtay

My users keep unplugging our meeting rooms computers network connection. As i can't check the computers every time a meeting ends, i'd like to find a tool, preferably running on windows, that can monitor some cisco switch ports state, and every time a cable is being unplugged, send me an email. I know that some monitoring solutions can do that already, but i wonder if something simplier (and preferably cheap / free of course !) exists.

Read the article
Local and public IPs on the same switch?

- by Andrew

It's all pretty much in the title. Is it possible to assign both local and public IPs to different nodes connected to the same switch? I have 4 servers with 2 gigabit ethernet ports each. I want one of each to have a public IP, and the remaining ports to have local IPs for server-to-server traffic. Sorry if it's a dumb question. I didn't see anything about it on here already.

Read the article
What's the difference between a Layer 2 & Layer 3 switch

- by Jon Rhoades

What's the difference between a Layer 2 & Layer 3 switch? I've always wondered and never needed to know until now.

Read the article
Why use an OO approach instead of a giant "switch" statement?

- by James P. Wright

I am working in a .Net, C# shop and I have a coworker that keeps insisting that we should use giant Switch statements in our code with lots of "Cases" rather than more object oriented approaches. His argument consistently goes back to the fact that a Switch statement compiles to a "cpu jump table" and is therefore the fastest option (even though in other things our team is told that we don't care about speed). I honestly don't have an argument against this...because I don't know what the heck he's talking about. Is he right? Is he just talking out his ass? Just trying to learn here.

Read the article
Switch-Case for strings in Javascript not working as expected

- by Coltin

So I have this problem with strings and switch-case, and I'll try to keep it as simple as possible. Here event.keyCode has the value "65", and is the result of a keydown event of 'a' (using JQuery). if (event.keyCode == "65") { alert("hmmmm"); } That works, but: switch (event.keyCode) { case '65': alert("Yay!"); break; } That doesn't. However this will work: switch ('65') { case '65': alert("Yay!"); break; } And if I do this: var t = '65'; switch (t) { case '65': alert("Yay!"); break; } It works. And then I tried this: var t = event.keyCode; switch (t) { case '65': alert("Yay!"); break; } But it fails! So why does it match in the if-block at the beginning, but not for the switch-case?

Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12 | Next Page >