Search Results

Search found 1691 results on 68 pages for 'brand'.

Page 50/68 | < Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >

• Seagate 3TB ST3000DM001 hard drive not recognized by Linux, causes fdisk to hang

  - by MountainX

  I'm running Kubuntu 12.04. I have a brand new, never used Seagate 3TB ST3000DM001 hard drive. It's an internal drive. I installed it in a USB enclosure. When I connect it to my PC, nothing happens automatically. When I run sudo fdisk -l, fdisk hangs (without reporting this drive) until I disconnect this drive from the USB port. blkid won't report it either. I tried connecting it to both USB 2.0 and USB 3.0 ports on my PC. I got the same result either way. I tried two different USB enclosures with the same result. If I take the same drive, same enclosure and connect it to a Windows 7 laptop, it is recognized automatically as a USB mass storage device. I want to format the drive (probably ext4) and copy files to it. I have another drive, also in a USB enclosure, that is connected via USB 3.0 to this PC and it works fine. It's a 2.0 TB Samsung HDD. I plan to copy files from the 2TB to the 3TB drive, once I get this issue resolved. My motherboard is an Asus Asus P8B WS LGA1155/ Intel C206/ Quad CrossFireX/ SATA3&USB3.0/ A&2GbE/ ATX. What is the resolution?

  Read the article

• How come my Intel 520 180GB SSD performs extremely poorly?

  - by Willem

  I recently installed a new Intel 520 series 180GB SSD in my brand new MacBook Pro. The system is as follows: Model: MacBook Pro 15-inch, Late 2011 (MacBookPro8,2) Processor: 2.4 GHz Intel Core i7 Memory: 16 GB 1333 MHz DDR3 Graphics: AMD Radeon HD 6770M 1024 MB Software: Mac OS X Lion 10.7.3 Main Drive Bay: Intel 520-series 180GB SATA-3 (6GB/s negotiated link) SSD (Firmware: 400i) [80GB free] Optical Bay: Toshiba 5400 RPM 750GB SATA-2 HDD Trim: Enabled (according to Trim Enabler App) And here are the speeds I'm getting: Read: 412 MB/s Write: 186 MB/s What have I done wrong? Results expected: Read/write both 500MB/s I have seen benchmarks with lesser SSD:s (SATA-2 even) outperform my write-speeds by far. Also, Intel 520 SSD:s are supposed to be the top class of SSD:s. Trim Enabler report: This looks a bit odd compared to screenshots from their site: These is the defined S.M.A.R.T attributes (taken from Intel): And here are my S.M.A.R.T attributes read using smartctl tool from smartmontools: They don't seem very compatible. I'm going to try and look for a S.M.A.R.T attributes reader tool for OS X which might support Intel 520 series.

  Read the article

• No video signal and server shuts down

  - by Ilya

  I have a brand new server. The motherboard is Intel S2600CP4, two 8-core Intel E5-2600 processors. RAM is 8 DIMM slots of 8 GB each (KVR1600D3D4R11SK4/32GI, I installed them into the blue slots), Power supply is 1050W Corsair. Most of the time the server won't start up - the fans are spinning, but I don't have video signal. And it keeps restarting on its own every 3 mins. But maybe after 30 mins it will eventually load and show something on the screen. I even was able to install ESXi 5.0 (vSphere) on it. It recognizes both CPUs and all of the 64GB of RAM. But even then it worked only for around 5 hours and then restarted on its own. What's the problem? That's a very expensive peace of hardware and I can't afford purchasing a new motherboard/CPU. By the way, on the front panel the "System Status" LED is constantly amber (not blinking), even when the server started successfully. And also in the BIOS I can see lots of "processor 01 unable to apply microcode update 8160" fatal errors. Please help me with issue, I will really appreciate this!

  Read the article

• Scroll wheel causes browsers + Windows explorer to go back

  - by KaptajnKold

  I use Windows 7 on a VirtualBox VM on a Mac. Lately, when I'm using any browser (IE9, Chrome or FireFox or even Windows Explorer), use of the scroll wheel followed by any movement of the mouse cursor causes the browser to go back. Very annoying. This happens when I use the scroll wheel on a USB connected mouse (brand/model unknown, since I don't have it in front of me as I write this) or when I use two-finger scrolling on the trackpad when no mouse is connected. When I connect from my VM to a remote Windows box (Windows Server 2008), I experience the same problem. I have tried rebooting the VM to no avail. I am not sure when the problem started exactly. It may or may not have been after I connected the USB mouse for the first time, but trying to unplug it and then rebooting didn't help. I have tried to google for a solution, but all I've found are people who accidentally pressed the shift key while scrolling, which will cause the browser to go backward or forward in the browser history. This however is not the problem I'm having. To be clear, in my case the browser only goes back when I move the mouse after I've used the scroll wheel. I'm at my wits end :(

  Read the article

• Constant crashes in windows 7 64bit when playing games

  - by yx

  I've tried everything I can possibly think of in trying to fix this problem and I'm totally out of ideas, so any help would be appreciated: The problem: whenever I fire up a game, it works for a short while with no problems and then it would crash. Either its a hard crash, forcing me to reboot, or windows would report that the display driver has stopped working and recovered. Here is a list of things I've already tried: Drivers - tried the latest drivers (catalyst 9.12) as well as the stock drivers that came with the video card. Also have the latest BIOS/chipset Memtest - Ran Memtest86+ overnight, had no problems, the windows diagnostic tool also does not find any problems. Overheating - Video card/cpu temperatures are well below peak (42 and 31 Celsius receptively) PSU Voltage - CPUID shows that the voltage levels are all above what they should be. The PSU itself is only roughly 16 months old and is a good model. HDD - No errors when checked GPU - Brand new (replaced previous card since I thought it was the problem, apparently not) Overclocking - Everything is at stock levels, memory voltage is set to manufacturer's standard Specs: Motherboard: ASUS P5Q Pro CPU: Core 2 Duo E8400 3.0 ghz OS: Windows 7 home premium 64 bit Memory: Mushkin Enhanced 4GB DDR2 GPU: Sapphire HD 5850 1GB PSU: SeaSonic M12 600W ATX12V DirectX: DX11 Event Viewer after a crash always has these logged: A fatal hardware error has occurred. Reported by component: Processor Core Error Source: Machine Check Exception Error Type: Bus/Interconnect Error Processor ID: 1 The details view of this entry contains further information. A fatal hardware error has occurred. Reported by component: Processor Core Error Source: Machine Check Exception Error Type: Bus/Interconnect Error Processor ID: 0 The details view of this entry contains further information. A previous card that I had (4850x2) also had these errors, so I changed video cards, but the same thing is happening.

  Read the article

• Can't Start SQL Server 2005 Agent - Start/Stop Are Not Enabled

  - by DaveB

  We have a brand new install of SQL Server 2005 on a Windows 2008 Server. When using the SQL Server Management Studio (2005 or 2008) from my Windows XP Professional workstation, if I right click on the SQL Server Agent, I get the context menu but the Start and Stop options are not enabled(grayed out). I am using Windows authentication, I am a member of the SysAdmin and Public SQL Server roles. Also, when right clicking on Maintenance Plans and selecting New Maintenance Plan, nothing happens. I was able to create a maintenance plan with the wizard but now am unable to execute it because SQL Server Agent isn't running? From what I was told by an admin who had access to the server, he was able to login to the box using the domain administrator account and start the SQL Server Agent service from the services applet or from the local instance of SQL Server 2005 Management Studio. Even after he started the service, it still didn't appear to be running from my workstation view through the management studio. What do I need to change to allow me to administer the agent and maintenance plans from my workstation? If I wasn't clear about anything, feel free to ask for clarification.

  Read the article

• PC shut downs automatically after 10-20 second. No POST screen, no beeps

  - by emzero

  I have this not-so-old computer that's not being used for a year or so. Specs: Motherboard: ASUS PN5-E SLI CPU: Intel Core2Duo E4300 RAM:2x2GB SuperTalent DDR2-800 VGA: Zogis GeForce 7950GT PSU: Vitsuba San-55-S 550w HD: No hardrives yet When I power on the computer, everything seem to start, but right away the whole system shuts down. I've removed and changed the RAM sticks, take out the VGA, everything I could think of. So what could it be causing this? The PSU? The motherboard is dead? The CPU? Any help to isolate the problem will be useful. Thanks PS: Please don't close the question, this could be helpful to anybody having a similar problem, even with different hardware. UPDATE I've removed the old thermal paste and apply a brand new one. I also cleaned every dust using a high pressure gas dust remover. Checked for bad capacitors, all of them seem ok. Opened the PSU, removed big giant dust balls, cleaned with high pressure dust remover. Still the same problem, but now it stays powered on for almost 20 seconds maybe. But no POST screen, no beeps at all, nothing. So I suspect it's a motherboard or PSU failure. Unfortunately I don't have an energy tester to test the PSU... Don't know what else to try. I don't have another 775-motherboard to test the CPU, RAM and VGA with it.

  Read the article

• Troubleshooting: Monitor never turns on, system fans running, DVD-ROM does not open.

  - by Wesley

  Hi all, Here are my specs beforehand: ECS P4VXASD2+ (V5.0) motherboard FSB 533MHz Intel Pentium 4 2.40A GHz Prescott Socket 478 2x 256MB PC2100 DDR RAM, 2x 256MB PC133 SDRAM CoolMax 350W PSU DVD-ROM - will edit with brand & model 128MB ATi Radeon 9800 Pro AGP No hard drive So, I just put those parts together today and I tried to power it up, with the monitor connected to the Radeon 9800 in the AGP slot (mobo does not have VGA port). After turning it on, the CPU fan, graphics fan and system fan go on. However, the monitor remains in standby mode, despite being plugged in. Also, after pushing the button on the DVD-ROM drive, it does not open. I've used the DVD-ROM drive before with absolutely no issues. The graphics card was slightly buggy when I put it on another machine, which was left outside in winter weather for 3 months. (Still that computer's integrated graphics worked fine.) CMOS battery was replaced and jumpers are all set correctly. Now, I'm wondering whether the motherboard, CPU, PSU or GPU is the problem. What can I do to test which part is the problem? Just to clarify, I don't have a hard drive, so I usually boot Ubuntu from the disc drive. Anyways, thanks in advance!

  Read the article

• Deleting certain files sits at "preparing to recycle" on Windows 7?

  - by Rachel

  We recently setup one of our users with a brand new Windows 7 computer, however she is unable to delete certain files. With some testing, I found I cannot move, rename, or view properties of these files either. When trying to delete the file, it just sits at the "Preparing to recycle" popup, however the "from" section says "Discovering items..." Clicking "More Details" on the popup shows me that it can't find the file name or where it's recycling from: Other notes... All the affected files are .pdf files that get created via a scanner. Other pdf files are fine. Opening the files works fine. I can open the file, Save As a new file, and delete the new one just fine Trying to delete the file via command prompt just sits there Rebooting the computer will let me manipulate the files like normal, however this user is responsible for scanning hundreds of documents a day and I'd rather not have to tell her to reboot her computer to delete files. The user is part of the administrator group on the computer The Owner of the affected files is the user attrib of files is just A

  Read the article

• Stop the constant random reboots of my GIGABYTE GA-B75M-D3V

  - by Frederic

  I've got some issues with a new system. It's rebooting constantly. The system consists of a: brand new: Gigabyte GA-B75M-D3V with F9 BIOS (latest) Intel Core i5-3470 Ivy Bridge 2x 8GB G.SKILL Ripjaws 1600MHz memory (mem-tested x-86) coming from a stable system: Creative Soundcard X-FI Titanium Asus Radeon HD4850 OCZ Vertex 3 120G SSD Sata 3 Hard disk 1TB Sata 2 ASUS Blu-ray Drive PSU 400w Connected peripherals : Toshiba tv (displayport on dvi of MB or HD4850) Wired mouse, wireless keyboard (logitech) Bluetooth usb key Azio main problem : it's not possible to read the errors from the MB. nothing on the manual neither on internet. At the beginning, I received a MB with graphic problems and the problem of rebooting. I RMA'd it. The new one doesn't have any graphic problems. but it's still constantly rebooting. I removed everything except the HD, the sound-card, the blu-ray drive and the wireless keyboard. It's still unexpectdly rebooting. I'm running a test with just the motherboard and the HD. I will update this text after the test. I've got some questions : Somebody have an idea of a test? The PSU could cause that problem? I used it a lot of years with the stable system. Update 1: BTW, if anyone has the same problem, the manual won't say it but you'll need to reset the bios between two tests (the screwdriver on the two pins) if you suspect a problem of compatibility .

  Read the article

• Why won't IIS serve my website? - 404 Page Not Found

  - by Giffyguy

  Built a brand new server, with a fresh copy of Windows Server 2003 Enterprise x86 Edition. Installed the .NET Framework 1.1, 2.0, 3.5, and 4.0 Added the "Domain Controller" and "Application Server" roles. Created a new website, pointed it to a local directory: C:\Inetpub\angryoctopus.net\ Added the appropriate headers: angryoctopus.net, www.angryoctopus.net, TCP port 80, all IPs Moved the website content into the local directory. Configured the default document in IIS: Default.aspx Enabled ASP.NET for this website, and set it to the correct version: 2.0.50727 Configured the zone angryoctopus.net in DNS. Tested DNS lookup here to ensure DNS was functional. Opened website in VS 2008 and re-built (and debugged) to ensure the content was functional. I can clearly see that IIS is responding normally, by browsing directly to my server's IP address. Since this does not use the angryoctopus HTTP header, the default website is displayed instead: the "Under Construction" page. And yet, after all of this, angryoctopus.net still returns 404. Does anybody know what could be wrong? What troubleshooting steps have I forgotten? Is there a command-line diagnostic that might provide more information?

  Read the article

• sata hard drive failed

  - by M. Shehryar

  Dear friend, initially my dual core PC started shutdown and re-start by itself after adding 1 GB ram and up-grading the graphic card. Then refused to boot. I restored the window ghost but failed to boot. I tried to install new window but installation failed after coping the window files. tried to install old vista lonhorn. It inspected found errors, fixed them but ultimatly failed to be installed. Once again restored the ghost through acronis but failed to boot. At the end attached as slave with another pc but it was not visible. Even acronis could not see it or its partitions. Only bios can see it. It seems that no file system is available on the drive. My data on drive is very important. Please help me how to revover my data. Drive brand is Samsung, cap is 160 GB and file system was NTFS.

  Read the article

• sata hard drive failed

  - by M. Shehryar

  Dear friend, initially my dual core PC started shutdown and re-start by itself after adding 1 GB ram and up-grading the graphic card. Then refused to boot. I restored the window ghost but failed to boot. I tried to install new window but installation failed after coping the window files. tried to install old vista lonhorn. It inspected found errors, fixed them but ultimatly failed to be installed. Once again restored the ghost through acronis but failed to boot. At the end attached as slave with another pc but it was not visible. Even acronis could not see it or its partitions. Only bios can see it. It seems that no file system is available on the drive. My data on drive is very important. Please help me how to revover my data. Drive brand is Samsung, cap is 160 GB and file system was NTFS.

  Read the article

• Drivers and firmware for the LiteOn ihap-122-9 DVD drive

  - by Sandy

  I'm trying to replace the DVD drive in my old PC. LiteOn.com is a mess and I can't find a single working driver or firmware update there, or anywhere. Windows XP tries to use a default, generic driver dated 2001. (About 9 years before this drive even existed.) http://www.firmwarehq.com/download_1..._6L0H.EXE.html This correctly finds my LiteOn ihap-122-9 DVD Drive. It correctly finds that I'm currently using firmware 6L0F. It correctly tries to install 6L0H. It completes 100% but then just fails and says "contact your vendor". Does anyone know why? Where can I actually get drivers... and firmware updates... that actually work for the ihap-122-9? Apparently, the newest driver IS the 1 made 9 years before the drive existed. (Unbelievable.) And the latest firmware is the 1 that is already in the drive. (Common.) No other drive I've had in this computer ever had a problem. This brand new LiteOn is doing this: Opening MY COMPUTER now takes 60 seconds. MY COMPUTER marking the drive as "DVD F:" takes another 30 seconds. MY COMPUTER showing "Batman II" title takes another 15 seconds. Clicking and running the movie will take another 30 seconds for the main-menu to appear. The movie starts about 20 seconds later. The movie runs fine for 1-2 seconds... then stops for 5 seconds.... then starts again and plays for 1-2 seconds. Repeats for 2 hours. (It happens with all store-bought DVDs and all home-made DVDs.)

  Read the article

• Debian, How to convert filesystem from ISO-8859-1 into UTF-8?

  - by Johan

  I have a old pc that is running Debian stable, that is in need of a upgrade. The problem is that it is using latin1 (ISO-8859-1) for everything, and since the rest of the world has moved to UTF-8 I plan to convert this computer as well. And for this question I will focus in on the files that are served with Samba, and some has some latin1 characters in the filenames (like åäö). Now my plan is to move all data of this old computer onto and a brand new one that is running Debian stable (but with UTF-8). Does anybody have a good idea? Thanks Johan Note: later I plan to use iconv to convert the content of some files with something like this: iconv --from-code=ISO-8859-1 --to-code=UTF-8 iso.txt > utf.txt However I don't know of a good way to convert the filesystem it self. Note: Normally I usaly just scp from one computer to the next, but then I end up with latin1 characters in the utf-8 filesystem... Update: Did a small test round with a hand full of files (with funny chars) in the filenames, and that seemed like it could work. convmv -r -f ISO-8859-1 -t UTF-8 * So it was only to execute with the --notest convmv -r -f ISO-8859-1 -t UTF-8 --notest * Nothing more to it.

  Read the article

• Windows 7 Aero theme's "greyed out" - no found fix

  - by Robsta

  Brand new machine that was working fine then randomly it changed the theme when I booted into a sort of "basic" theme (white task bar, no see through windows etc) I've done and attempted many fixes and I still don't understand why it doesn't work. I've tried these two solutions: "How to enable Windows 7 Aero Theme" and "Windows 7 Aero Themes Greyed out" These solutions included registy changes, stopping/starting services, and force starting the aero theme. The closest I got seems to be when I went into: Control panel (category view) Find and fix problems (System and Security) Display Aero Desktop Effects I follow through the wizard and let it do its thing and then I get an error window that pops up: Personalization - "This theme can't be applied to the desktop. Try clicking a diffrent theme." That's what I get from the wizard. What can I do? My drivers are all up to date, there are no viruses on the computer, directx is installed and updated, and the registry is all correct. EDIT: When I boot the computer, I get a notification stating that windows failed to communicate with the windows desktop services.

  Read the article

• Win7 System folder contains infinitely looping SYSTEM(!) directory

  - by Matt

  My Windows 7 Enterprise computer has been crashing fairly frequently recently, so I decided to boot up in safe mode and run the TrendMicro client I have installed. It froze about 10 minutes into the full system scan, so in the spirit of http://whathaveyoutried.com, I started scanning each folder individually. When I got to ProgramData, the AV failed with an uncaught exception. I then went down a level and tried scanning Application Data, which failed as well. Imagine my surprise when I open the folder just to see the same folder again! As far as I can tell, this folder loop continues indefinitely. (If you are trying to recreate this, keep in mind that ProgramData is a hidden folder.) I'm actually a bit concerned that these are system folders, as this is a brand-new computer with a clean installation. I guess I have three questions: Has anyone else seen/experienced this before? I'm running Win7 SP1. How do I fix this? I've run CHKDSK \F with no success (although it was incredibly slow). What are the ramifications of an infinitely recursive directory? Theoretically speaking, each link takes up memory, so shouldn't I have no space available on my hard drive? (I've got about 180GB left.) I noticed that the tree view on the left only shows the "linked folder" icon on the deeper folders--does this mean anything special? (I've circled the icons or lack thereof in red.) How can the OS even resolve this aberration? And above all, what would happen if I were to select "Expand all folders"??? :P Matt

  Read the article

• How To Replace Laptop HDD Without Losing Data?

  - by Ishan

  Hello, I recently went to Dell Service center and they tell that HDD is faulty and needs to be replaced. I have a Studio 1457 laptop with 500 GB HDD and don't want to lose the data(purchased in May 2010, still under warranty). I have searched a bit and I think it may be best to use a disk imaging software for this task. However, I don't know about a good software. I have following steps in mind: Get a 1 TB External HDD. Make an image of existing 500 GB HDD and store data on external disk. Install new HDD and install a brand new Windows copy and then install the software on it. Using the same software I used to make image, restore the old HDD image on new one. However, I have some questions in mind. First, is this possible? Second, I live in a country where piracy is a big issue and I am sure the support executive who will come to change HDD will have a pirated copy. But I have genuine Windows 7 Pro and don't want to lose it. Now, Dell does not supply and OS disks, so I can't install it on new HDD! If I follow above steps, which version of Windows 7 will be retained? One in the image(authentic) or one in the new HDD(pirated). I am ready to purchase a good software for this task and my budget is $50-60. Since laptop is under warranty, new HDD will be free. One last thing, I have created a Windows Migration file whose size is 70 GB. Can it be used to move from Windows 7 Pro to Windows 7 Pro?(In case I get a genuine copy of Windows 7!) Any other method to save all the data? Thanks in advance.

  Read the article

• Why is my Drupal Registration email considered spam by gmail? (headers included)

  - by Jasper

  I just created a Drupal website on a uni.cc subdomain that is brand-new also (it has barely had the 24 hours to propagate). However, when signing up for a test account, the confirmation email was marked as spam by gmail. Below are the headers of the email, which may provide some clues. Delivered-To: *my_email*@gmail.com Received: by 10.213.20.84 with SMTP id e20cs81420ebb; Mon, 19 Apr 2010 08:07:33 -0700 (PDT) Received: by 10.115.65.19 with SMTP id s19mr3930949wak.203.1271689651710; Mon, 19 Apr 2010 08:07:31 -0700 (PDT) Return-Path: <[email protected]> Received: from bat.unixbsd.info (bat.unixbsd.info [208.87.242.79]) by mx.google.com with ESMTP id 12si14637941iwn.9.2010.04.19.08.07.31; Mon, 19 Apr 2010 08:07:31 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of [email protected] designates 208.87.242.79 as permitted sender) client-ip=208.87.242.79; Authentication-Results: mx.google.com; spf=pass (google.com: best guess record for domain of [email protected] designates 208.87.242.79 as permitted sender) [email protected] Received: from nobody by bat.unixbsd.info with local (Exim 4.69) (envelope-from <[email protected]>) id 1O3sZP-0004mH-Ra for *my_email*@gmail.com; Mon, 19 Apr 2010 08:07:32 -0700 To: *my_email*@gmail.com Subject: Account details for Test at YuGiOh Rebirth MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8; format=flowed; delsp=yes Content-Transfer-Encoding: 8Bit X-Mailer: Drupal Errors-To: info -A T- yugiohrebirth.uni.cc From: info -A T- yugiohrebirth.uni.cc Message-Id: <[email protected]> Date: Mon, 19 Apr 2010 08:07:31 -0700 X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - bat.unixbsd.info X-AntiAbuse: Original Domain - gmail.com X-AntiAbuse: Originator/Caller UID/GID - [99 500] / [47 12] X-AntiAbuse: Sender Address Domain - bat.unixbsd.info X-Source: X-Source-Args: /usr/local/apache/bin/httpd -DSSL X-Source-Dir: gmh.ugtech.net:/public_html/YuGiOhRebirth

  Read the article

• HP Proliant DL380 G4 - Can this server still perform in 2011?

  - by BSchriver

  Can the HP Proliant DL380 G4 series server still perform at high a quality in the 2011 IT world? This may sound like a weird question but we are a very small company whose primary business is NOT IT related. So my IT dollars have to stretch a long way. I am in need of a good web and database server. The load and demand for a while will be fairly low so I am not looking nor do I have the money to buy a brand new HP Dl380 G7 series box for $6K. While searching around today I found a company in ATL that buys servers off business leases and then stripes them down to parts. They clean, check and test each part and then custom "rebuild" the server based on whatever specs you request. The interesting thing is they also provide a 3-year warranty on all their servers they sell. I am contemplating buying two of the following: HP Proliant DL380 G4 Dual (2) Intel Xeon 3.6 GHz 800Mhz 1MB Cache processors 8GB PC3200R ECC Memory 6 x 73GB U320 15K rpm SCSI drives Smart Array 6i Card Dual Power Supplies Plus the usual cdrom, dual nic, etc... All this for $750 each or $1500 for two pretty nicely equipped servers. The price then jumps up on the next model up which is the G5 series. It goes from $750 to like $2000 for a comparable server. I just do not have $4000 to buy two servers right now. So back to my original question, if I load Windows 2008 R2 Server and IIS 7 on one of the machines and Windows 2008 R2 server and MS SQL 2008 R2 Server on another machine, what kind of performance might I expect to see from these machines? The facts is this series is now 3 versions behind the G7's and this series of server was built when Windows 200 Server was the dominant OS and Windows 2003 Server was just coming out. If you are running Windows 2008 R2 Server on a G4 with similar or less specs I would love to hear what your performance is like.

  Read the article

• bootmgr image is corrupt

  - by bacord

  I just replaced my HD with a SSD. I did a brand new install on the SSD and I received the following error after booting BOOTMGR image is corrupt. The system cannot boot. A little configuration for your knowledge. The system used to be a dual boot with XP & windows 7. After replacing the original startup HD with my SSD I changed a setting in the bios to AHCI (I have tested changing it back but this did not help). When I look at the stats on the drive in the bios, it claims that the SSD is in a raid configuration despite the settings not being configured that way. Related System Information: Intel 320 Series 80 GB Sata II SSD JetWay JPA78VM3-H-LF AM2+/AM2 AMD 780V HDMI Micro ATX AMD Motherboard AMD Athlon 64 X2 7 GB ram I have performed 2 fresh installs to no avail. Also, followed this guide and performed option 1 and 2. I have done bootsec/fixmbr and /fixboot. So.. any suggestions?

  Read the article

• What is the sysadmin's dream network printer? 6-8k pg/mo. Xerox, OkiData, Lexmark and HP are all fail

  - by Jacob

  How do I find out what printer brand and/or type doesn't suck? This information is hard to find and manufacturer's websites won't reveal any issues with certain printers. After 10 years of dealing with network shared printers, I can't say that I have been impressed with any of the printer brands I've seen. Brother's little laser MFPs have been close to ideal for low volume, but that is it, period. OkiData, Lexmark, HP, Xerox solid ink printers, they all sucked in one way or another. Currently I'm looking to replace a Xerox ColorQube 8570 because it fails to print on a regular basis. Sometimes it doesn't even boot VxWorks fully - it just hangs at 2% or whatever. I've used Xerox 8860MFPs and they sucked just as bad. I won't talk about ink jets here, that's most likely not what I'm looking for. We currently spend about $4k on paper and ink per year for this printer at up to 6-8k pages per month, letter, mostly black and white, low color usage. I want the printer to feed paper correctly, not crash and burn when a PDF isn't according to its taste (my favorite Xerox problem here) and with decent drivers for Windows and OS X. Print quality is not of the utmost importance but paper does get sent to customers.

  Read the article

• Cant kill process on Windows Server 2008!! - Thread in Wait:Executive State

  - by adrian

  I hope someone can help me with our issue we are having. We have a major issue with a process that we can not kill and the only way to get rid of the process is to reboot the machine. I have tried killing it from the normal task manager but no joy. I have tried killing it using the taskkill /F command from a command prompt and no joy. The command reports as sucessful but the process remains. I have tried to start task manager with system rights by calling "psexec -s -i -d taskmgr" and attempting to kill the process but no joy I have tried killing it from Process Explorer but again the process remains. I have tried creating a scheduled task that runs under the SYSTEM name to kill the task but that also does not kill it : schtasks /create /ru system /sc once /st 13:16 /tn test1 /tr "taskkill /F /PID 1576" /it Nothing I do will kill this process. Even logging off and logging back on will not kill this process. Using Process Explorer I notice that there is on stubborn thread that is in the Wait:Executive state. I have tried to kill this thread using Process Explorer but again no joy. We are using Windows Server 2008 R2 64-Bit. The server is brand new and windows is freshly installed. Now heres the thing. We have brought two identical servers from Dell with the same specs and the same OS installed and I can not replicate this issue on the other server. Only on this server, under certain circumstances does this server process hang and can not be restarted! I have also changed the compatability mode by setting it the process to "Windows 2003" but this has not helped. I have noticed in Process Explorer that DEP is turned on but im not sure this has got any bearing on the issue ot not. Please, can someone help??

  Read the article

• Windows 7 hangs after going into sleep a second time

  - by Brian Stephenson

  I've searched everywhere around Google and can't figure out why this is happening so I decide to ask here to see if anyone has a problem like this. Like it says in the title, whenever I sleep ONCE I'm able to wake the system, but going back to sleep again AFTER waking up for the first time results in it hanging on no input and no output, with the fan spinning as fast as possible and alot of heat being spewed out by the fan as well. I've tried various things like setting all USB Hub Root's to not get switched off for power saving, disabling USB selective suspend, disabling PCI-e link state power management, and even unplugging ALL USB devices and it wont wake up after the second attempt. And I've even waited up to a full hour of the CPU fan spinning loudly and it's still stuck trying to wake up. The only USB devices I use are a Microsoft USB Comfort Curve Keyboard 2000 (IntelliType Pro) and a generic HID compliant mouse from Creative model number OMC90S "CREATIVE MOUSE OPTICAL LITE". My other devices like external drives and controllers are unplugged when I'm not using them as having too many USB devices plugged in at a time causes a deadlock on almost all of the ports I have. Here's my system specifications (Most of these are from CPU-Z): Brand: Gateway DX4300-19 Mainboard: Gateway RS780 Chipset: AMD 780G Rev 00 Southbridge: AMD SB700 Rev 00 LPCIO: ITE IT8718 BIOS: American Megatrends Inc. ver P01-A4 09/15/2009 CPU: AMD Phenom II X4 810 at 2.60 GHz RAM: 8.0 GB DDR2 Dual Channel Ganged Mode at 400 MHz GPU: ATI Radeon HD3200 Graphics Intergrated - RS780 OS: Windows 7 Home Premium x64 OEM (Acer Group) HDD: WDC WD10EADS-22M2B0 1.0 TB (Western Digital Green Caviar) My BIOS has absolutely no control over how I setup the sleep mode to be either S1 or S3. So I can't check these settings or even change them. Hybrid sleep is also disabled, I can successfully go into hibernation and wake from hibernation but this is painfully slow due to a harddrive problem I'm having with this "Green Drive". (Hibernation takes over ~3 minutes to complete) Any help would be appreciated, thanks.

  Read the article

• Window 7 Computer name changing on its own?

  - by DC

  Very odd problem... I have a Dell Latitude D830 with XP Pro that has been running on my local domain for many years. I recently Installed Windows 7 Enterprise on the D830 using a brand new HDD so that I could still use XP if I needed by just swapping out the HDD's. I added the W7 installed system to my domain using a completely different machine name than that used for the XP system and everything seemed to be functioning as it should. On boot up over the last 2 weeks or so I occasionally (3 times now) get to the login screen and try to login to the domain only to get an error saying that the Computer name is not a trusted machine in the domain I'm trying to log in to. Come to find out that the machine name on the W7 system has been changed somehow to that of my old XP system. If on the W7 system I then change the name back to the correct name, disjoin the domain, reboot, add the machine back into the domain … all is well for an unknown period of time until this happens again. This last time, I know for a fact that everything was fine the day before when I shut down the system. I came in today, powered up the system and the machine name had been changed to that of my old XP system again. Has anybody else seen this behavior or hav any ideas on what could be causing it? Thanks!

  Read the article

< Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >