Search Results

Search found 92087 results on 3684 pages for 'usb server'.

Page 50/3684 | < Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >

• USB 3.0 not functioning fully

  - by Simon Sheehan

  After installing GNU/Linux today onto my Lenovo Y570 laptop, I ran into an issue quickly - the USB 3.0 support. 2/3 of my USB ports are 3.0 so I kind of need them. The ports are powered at the very least - my phone is charging from one, however, plugging in external drives, USB drives, or even a mouse gives no response. The drives spin up, etc, but they do nothing more than that. So there is power, but no information flowing to them. What am I missing here? What can I try to enable to make things work?

  Read the article

• Is it possible to make a persistent USB serial port regardless ofthe existence of the USB device?

  - by Keith Nicholas

  USB serial ports, especially devices which emulate serial ports, don't quite behave the same as old serial ports, which causes a few problems with some software. old serial ports, always existed, they never come and go out of existence. With USB devices that emulate serial ports, they come and go depending on whether they are powered / reset etc. Is there a way under windows to make the USB serial port permanently exist regardless of the presence of the device? (not just come back as the same name as it was before).

  Read the article

• Need to boot into chkdsk from USB on Windows netbook

  - by Gaz Davidson

  While attempting to install Ubuntu on a 32-bit Windows XP netbook, the partition resize operation failed due to inconsistencies in the NTFS filesystem (lesson learned: run chkdsk /f in Windows before trying to resize a partition in Linux). Now the installer only gives the option to replace Windows with Ubuntu, the partition can't be resized in gparted, which displays a red exclamation mark and an error log when you click it. To make matters worse, we're also unable to reboot into Windows to get at chkdsk. We get a BSoD when choosing any of the options (including the DOS recovery console thing). The netbook has no CD-ROM drive, contains no recovery image and our only connection to the Internet is via the hotspot on my mobile device. We don't have Windows recovery CDs, but we do have a USB flash drive. We have a 64-bit laptop running Ubuntu 12.04 and Windows 7 (both 64-bit). So, on to the question: Is anyone aware of a way to get into a DOS recovery console and run chkdsk from a USB disk drive, without having to pirate Windows XP or download hundreds and hundreds of megabytes of crap? If it was my device I'd just flatten it, but it isn't. Please help!

  Read the article

• How to create an "hybrid" usb stick?

  - by rdesign

  Hey guys, I was wondering how to make an hybrid usb stick. That means a usb stick that runs under mac and windows and displays specific content. Example: Plug in on win : index.html opens. Mac os X files are invisible. Plug in on mac: indexMac.html opens. Win files are invisible. I know that every usb stick can be read by both platforms. The Apple Mac os X CD is something which inspired me. thanks a lot.

  Read the article

• Fedora12 Slow USB 2.0 Write Speed, ehci_hcd module is missing

  - by MA1

  I am using Fedora 12, the problem I am facing is USB 2.0 write speed. I have a dual boot system with Windows XP and Fedora 12. USB 2.0 write speed in Windows XP is much faster then what I am getting in Fedora 12. After searching Google I came to know that ehci_hcd module is missing/not present in my system. ehci_hcd module is neither loaded nor it is present in the available list of modules. Can someone guide me how to fix this issue? Does ehci_hcd have something to do with USB 2.0 write speed? Do I have to recompile the kernel and add/enable the ehci_hcd module?

  Read the article

• How to disable power to USB ports when laptop is in sleep mode

  - by Greg

  I have a Windows7 laptop with two external 2.5" HDDs and a cooling pad connected through USB ports. When I put the laptop to sleep, these devices are still powered on - the fan in the cooling pad is still spinning, the drives are still spinning. I want to set it all up so that they power down when in sleep. I tried setting the Allow the computer to turn off this device to save power option in the USB Root Hubs' Properties in Device Manager and enabling USB selective suspend in power options - it didn't work. As it's a laptop, BIOS options are extremely locked down, so I can't even see anything relevant to sleep in there. Is it even possible to do this?

  Read the article

• USB driver problems (Windows 8.1)

  - by HelloWorld

  Every time I turn on my laptop the USB ports don't work and the drivers have an error. In order to fix this I'm forced to start the Device Manager, uninstall all the USB drivers, open the Control Panel, click Find and fix problems (under System and Security), click Configure a device (under Hardware and Sound) and then when that window pops up just hit Next until I can see my USB drivers reinstalled and working in the Device Manager window under Universal Serial Bus controllers. I found this way to fix it but I would like a permanent solution so that I don't have to do this every time I turn on the machine. Any ideas? When I bought the machine it had Window 7 installed but I later upgraded it to Windows 8.0 and then 8.1 after that.

  Read the article

• CPU load, USB connection vs. NIC

  - by T.J. Crowder

  In general, and understanding the answer may vary by manufacturer and model (and driver, and...), in consumer-grade workstations with integrated NICs, does the NIC rely on the CPU for a lot of help (as is typically the case with a USB controller, for instance), or is it fairly intelligent and capable on its own (like, say, the typical Firewire controller)? Or is the question too general to answer? (If it matters, you can assume Linux.) Background: I'm looking at connecting a device (digital television capture) that will be delivering ~20-50 Mbit/sec of data to a somewhat under-powered workstation. I can get a USB 2 High-speed device, or a network-attached device, and am interested in avoiding impacting the CPU where possible. Obviously, if it's a 100Mbit NIC, that's roughly half its theoretical inbound bandwidth, whereas it's only roughly a tenth of the 480 Mbit/second the USB 2 "High Speed" interface. But if the latter requires a lot of CPU support and the former doesn't...

  Read the article

• why is usb disk corrupted by Vista restore

  - by Martin

  I have a laptop with Vista Business on an 80GB disk. I have created a full backup and stored that on the original 80GB drive. On my new 320GB disk, I have created a partition with exactly the same number of bytes as the original 80GB disk. I swap the disks so that the 320GB is internal, and the 80GB is in a USB caddy. I boot from the NEO restore CD and everything looks fine: I select the dump on the USB drive, target is drive C:, start the restore. After a few seconds, the restore fails with "not enough disks in machine or disk not large enough" error (I did note the exact phrase). I then swap the 80GB disk back to the internal drive, but the thing is unbootable. Why has the restore process scrubbed the boot status of the USB drive ?

  Read the article

• How to create a bootable Ubuntu Linux (10.04) USB installation for Macintosh

  - by vdavidovski

  I tried searching the Internet, but could not find a decent tutorial explaining how to create a bootable Ubuntu Linux (10.04) USB installation that could be run not only on a PC but also on Macs and MacBook Pros. In addition, I tried refit, but ended with "Missing operating system" error. Here is basically the layout of my bootable under PC Ubuntu USB drive (using MBR): Partition 1 (ext3, bootable) - Ubuntu Linux 32 bit, contains also grub2 bootloader. Partition 2 (ext3) - Ubuntu Linux 64 bit. Partition 3 (fat32) - contains data. What would be the best way to enable this drive to boot under Mac OS X? And if refit has to be used, could I simply have one more partition on the USB drive containing it? Thanks!

  Read the article

• How can you tell a USB cable version?

  - by Keltari

  Here is a question a student asked me in one of my A+ certification classes: How can you tell a USB cable version? I honestly dont know the answer, I cant find one either. USB cables are rated for versions 1, 1.1, 2, and now 3. I have seen their versions on the packaging, but never marked on the cable itself. Since the respective versions are manufactured differently, there is a difference between them. So, how can you tell? On Wikipedia: USB cables v.2 and earlier do use a "twisted pair" method, but doesnt specify if the cables themselves are the same or different. Is the cable rating system for v.2 and earlier just marketing hype?

  Read the article

• Terminal Server in Windows Server 2003

  - by Hemal

  I have a confusion regarding what I am doing here. At present I have a Windows Server 2003 server with SP2. I have assigned RAS/VPN server role to it (through Manage my server wizard) and in my router, I setup the IP address of my RAS/VPN server as PPTP server. Staff leave their workstations ON all the time and access them from home through RDP. They first connect thorugh VPN & in the RDC they simply type their respective IP or computer name to access the office network from home. Everything works fine so far except: Staff have to leave compuers always ON in the office Speed is very slow depend how many staff members access the VPN network I was told to install and configure Terminal service to improve this situation. I already added TS Role in the server but I don't know how to clients can access the TS server from home or remote location. I really appreciate any good links or guidence from the experts in this group regarding this. Thank you in advance for any replies!

  Read the article

• USB port not recognising mouse on first bootup

  - by Pacifika

  On a computer here when first powered on the USB wired mouse is not recognised. The light under the mouse is not lit up. Other usb hub's and keyboards work fine. Disconnecting it and reconnecting it fixes the issue, even after a restart - after the pc is switched off for a length of time (for example overnight) the problem reappears. I swapped the mouse, updated the bios and installed updated intellimouse drivers, turned of power saving on the usb ports. Any ideas?

  Read the article

• How to create a bootable Ubuntu Linux (10.04) USB installation for Macintosh

  - by vdavidovski

  I tried searching the Internet, but could not find a decent tutorial explaining how to create a bootable Ubuntu Linux (10.04) USB installation that could be run not only on a PC but also on Macs and MacBook Pros. In addition, I tried refit, but ended with "Missing operating system" error. Here is basically the layout of my bootable under PC Ubuntu USB drive (using MBR): Partition 1 (ext3, bootable) - Ubuntu Linux 32 bit, contains also grub2 bootloader. Partition 2 (ext3) - Ubuntu Linux 64 bit. Partition 3 (fat32) - contains data. What would be the best way to enable this drive to boot under Mac OS X? And if refit has to be used, could I simply have one more partition on the USB drive containing it? Thanks!

  Read the article

• Bootable ISO to USB stick xp wuickest method

  - by brux

  My dog took a leak on my PC when I went out (ye funny), now it reandomly restarts - im convinced the HDD is failing because the Windows seagate diagnostic program fails on a few tests. I want to run this prior to windows in an attempt to try and recover sectors, the program includes an iso which can be written to cd and booted, but i dont have any cd's. I tried using unetbootin to create the bootable usb from the iso file (SeaToolsDOS222ALL.576.ISO) but it doesnt work. When i boot from the usb hdd unetbootin loads with "default" in the menu. No joy booting though. I checked the usb hdd in windows and all the files are there, extracted from the iso file, wont boot though. Any ideas? Im using windows xp, or

  Read the article

• How to create one additional hidden partition in a USB drive

  - by backslash17

  For security purposes I need to locate a additional hidden partition on USB flash drive. The USB drive contains a security application that will check (in code) if the hidden partition exists. If not I will assume that the application is a non valid copy. Any idea about it? Thanks in advance. EDIT: There is already a programmed secure method to check if the USB drive is correct using the WMI Win32_drive class. The idea is to locate the drive info into the hidden partition and to check if it correct for anti-tampering procedures.

  Read the article

• Linux: disbale USB without disabling power

  - by Ergot

  TLDR I want toggle between the following usages of a usb-port via the terminal: use like a normal usb-port only supply energy to charge Story I recently got me something like a magna doodle that can save your drawings to pdf, which can be moved to your computer via usb afterwards. Now the thing is that you can't save anything while it's plugged in. Because it's the only way to charge it, it bugs me that I can't find a software solution and laziness I want to keep it plugged in and toggle the connection to the computer only when needed. I noticed that it's charging and usable when it is plugged in and the computer is shut down or suspened. So I guess that there's a way to do it. Tech info computer: ThinkPad X201 Linux Kernel: 3.14.5-1-ARCH "Magna doodle": Boogie Board Sync

  Read the article

• USB 3 adapter for a dell 2850 with PCI (or PCIX) ports

  - by Don Dickinson

  Does anyone know if there is a plain PCI (or PCIX) USB 3 adapter. i understand the bandwidth of PCI < USB3, but it still beats the heck out of USB 2. i have some older dell 2850s that do not have the PCI E ports that most USB 3 adapters require. i'd really like to get usb3 in those servers. i searched the internet but didn't see any. the local computer store said they only had pcie adapters. tia, don

  Read the article

• Wireless controllers vs wireless usb hub

  - by David Jensen

  For my htpc i currently only have a steerin wheel as a controller. This is wired and it looks really bad having extended usb wires from the tv to the table. However im thinking of bying some new Gamepads and now comes the question. Should i buy wireless ones or wired and connect them to a wireless usb hub? Having a wireless hub would let me manage my gamepads easily from the couch. A wireless hub also allows me to connect other things that are not input devices from the couch. However im wondering if wireless usb hubs may not be made for input devices in the way that they may not have 100% uptime and probably some delay. Am i right about this?

  Read the article

• Problems with USB-Devices using VDR

  - by emmsinator

  Hey Guys, I'm using VDR on vSphere4. It works sucessfully. I've already backuped several VMs with VDR and I like it very much. But now we got a problem. We have 2 VMs, using an USB-Device Server with a stick plugged in, which is definetely need by these 2 VMs for Licensing and so. Every time, I start the Backup process, the VMs lost the communication to the USB-Server and its stick after building the snapshot and while online. Because of that, the software on these VMs can't work correctly. I have to restart both Machines to solve this problem. These fact is bad for an automatic backup. Does VDR have a special function for those cases or is something like this already known? It would be no problem, to shutdown the servers for building snapshots on Saturday or Sunday. Can VDR initiate a shutdown before starting the backup process? Otherwise I must try to use scripts, but that wouldn't be so nice. Thanks a lot for your help.

  Read the article

• optimal folder structure for storing 100k files on a USB drive

  - by cherouvim

  I need to store 100k files (around 40GB) in a USB drive. Each file has a unique int id (e.g 45000). Option one is to put all files in a single folder: root/ root/1.pdf root/2.pdf root/3.pdf ... root/567.pdf root/568.pdf root/569.pdf ... root/10001.pdf root/10002.pdf root/10003.pdf ... root/99998.pdf root/99999.pdf root/100000.pdf Option two is to create a [1-9][0-9]* folder hierarchy based on that id: root/ root/1/file.pdf root/2/file.pdf root/3/file.pdf ... root/5/6/7/file.pdf root/5/6/8/file.pdf root/5/6/9/file.pdf ... root/1/0/0/0/1/file.pdf root/1/0/0/0/2/file.pdf root/1/0/0/0/3/file.pdf ... root/9/9/9/9/8/file.pdf root/9/9/9/9/9/file.pdf root/1/0/0/0/0/0/file.pdf Which option will scale better? I can understand that the second option will require tons of folders but each folder will at most contain 10 folders and 1 file. Maintenance will not be an issue since everything will be controlled by an application. Note that this is a USB drive on linux and based on the above I'd also like to know whether I should go with FAT32 or NTFS.

  Read the article

• MacBook Pro USB port provides more current in Mac OS X than in Windows

  - by AngryHacker

  I have a MacBook Pro with both Mac OS X Lion and Windows (under BootCamp) installed. While in Windows, I tried to charge my iPad 3 via the USB port. The iPad says "Not charging", but really, it does, just super slow (4-5% per hour). The reason for this is that the iPad requires 2.1 A of current, but a standard USB port provides 0.5 A. However, if I switch to Mac OS X, the iPad states that it is charging and it does at a rate of about 10% per hour. The only takeaway from this is that either OS X puts out more current on the USB port or that it recognizes the iPad and acts accordingly. Can someone provide more information on what is actually happening?

  Read the article

• Autoplay for USB drive keeps popping up

  - by Adam Haile

  I have a Seagate external 2TB USB drive that when I leave it plugged in, the Autoplay dialog asking what to do with the drive pops up about once every 30-60 minutes. No matter how many times I tell it to go away, it keeps coming back. I have tried multiple power supplies, USB cables, and all the USB ports on my machine...but it keeps doing the same thing. Also, this does not happen with the same drive on a different computer. Could this be some power or configuration setting that is causing this? I'm running Windows 7 x64 (the computer it works on is x86)

  Read the article

• Creating a command that compress a file and save it on a usb, but cannot detect the usb in linux.

  - by Lance

  First of all I can't detect the USB on linux using the command line. I check the directory dev and still cannot find the usb. used the df command to check the usb. I plug and typed df and then unplug and typed df again and nothing changed. We are using a server(telnet) to use the command line of linux on a windows 7 OS. The second problem I have is how can I execute the bash script that I have made. It seems that I cant put my .sh file in /usr/bin/ I would like to make my command executable in all directories like a normal command. Sorry, im still newbie at this things. This is what I get on staying on Windows too much. Sorry for my english. Thank you in advance.

  Read the article

• Wi-Fi or Bluetooth to USB converter

  - by yerzhik

  Is there a device, that works without a driver, you just connect it as usb, and receive any signal sent to it as if it were COM Port wired connection? For example, such a device that gets data sent to it by Wi-Fi network or Bluetooth and resends it to the USB. Of course it has to be set up once (network name, password etc) and for this purpose you need a driver, but once it is set up, you can use it at any computer without a driver. I have a Bluetooth USB, but I think it can't work without a driver. By just connecting it to any computer you can't find it in device list on another bluetooth device (as phone, etc).

  Read the article

< Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >