Search Results

Search found 18926 results on 758 pages for 'systems programming'.

Page 500/758 | < Previous Page | 496 497 498 499 500 501 502 503 504 505 506 507  | Next Page >

• Red Hat 6.5- sysctl -w net.ipv6.conf.default.accept_redirects=0

  - by kjbradley

  I am in the process of writing a Red Hat 6.5 Kickstart disc with hardened security. I have run a program to determine where the weaknesses are in my system, and apparently there is a medium severity problem by accepting IPV6 redirects. When I implement the following line in my post script in my kickstart, I can't access any websites externally with wget, or ssh/scp in from my computer. sysctl -w net.ipv6.conf.default.accept_redirects=0 Is there a workaround to this so that the system will still be hardened but I will be able to access systems that are external?

  Read the article

• What's a worthwhile test for a new HD?

  - by Michael Kohne

  I work for a company that uses standard 2.5" SATA HD's in our product. We presently test them by running the Linux 'badblocks -w' command on them when we get them - but they are 160 gig drives, so that takes like 5 hours (we boot parted magic onto a PC to do the scan). We don't actually build that many systems at a time, so this doable, but seriously annoying. Is there any research or anecdotal evidence on what a good incoming test for a hard drive should be? I'm thinking that we should just wipe them with all zeros, write out our image, and do a full drive read back. That would end up being only about 1 hour 45 minutes total. Given that drives do block remapping on their own, would what I've proposed show up any infant mortality just as well as running badblocks?

  Read the article

• How to achieve in-folder discussions with IMAP (skip SMTP send, Thunderbird)?

  - by lkraav

  Does anyone know a good way to achieve replying to a message into the same IMAP folder without sending another duplicate copy over SMTP? This is to be achieved with a conventional GUI mail client, especially Thunderbird. Goal is to have an in-folder conversation. This is possible with shared IMAP folders, with per-user Seen indices, where subscribed recipients are guaranteed to see the new messages without them arriving from internet. Thunderbird is capable of storing a copy of a reply in the same folder as original message (Account Options), which is half way there. Just pressing Save sends the message into Drafts and that is probably an even bigger patch to try to put a "draft message" into the same folder as original. All options, client, server or logic-wise are an acceptable answer, including programming i.e. patching/creating add-on for Thunderbird.

  Read the article

• kernel 2.6.36 not booting

  - by Saumitra

  Hi, I m a newbie to kernel programming. I am trying to boot the kernel 2.6.36 on my ECG machine.It was working perfectly on 2.6.33.2. It is getting stuck on this step: ## Booting kernel from Legacy Image at 81000000 ... Image Name: Created: 2010-12-27 5:55:56 UTC Image Type: MIPS Linux Kernel Image (gzip compressed) Data Size: 1974278 Bytes = 1.9 MB Load Address: 80100000 Entry Point: 80104730 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Starting kernel ... After this the system either resets or it hangs. I have also checked the configuration & set it properly.Please let me know.

  Read the article

• How do communcations through ports works

  - by user71866

  I was studying socket programming and certain questions came to my mind. These are some beginner level doubts Is it mandatory to to use well known port for a particular application. For example if i am using ssl, can i design a server to listen on 1000 rather than 443. For http we are connecting to port 80 from some other arbitrary port. Whys no port 80 to port 80 communcation. how a server responds to connections coming to it from different ports to its port 80. how many connections are possible to a particul

  Read the article

• Synergy stopped moving cursor over to client computer (config worked previously)

  - by crazedgremlin

  I am using QuickSynergy on OSX on my client computer and the standard Synergy program on Windows. I had a configuration that worked two days ago when I last used it, but today I came into work and it wasn't working. The odd thing is that the server shows that the client connects: NOTE: started server, waiting for clients NOTE: accepted client connection NOTE: client "danbook.local" has connected It's just that the cursor won't move to the other screen. The only change in either of my systems was that I added 4GB of RAM to the client, though that seems unimportant. What might cause this to happen?

  Read the article

• Does multi-platter hard-drive use all of their heads to read simultaneously?

  - by WiSaGaN

  Suppose we have a harddisk with 2 platters with characteristics below: Rotational rate: 10, 000 RPM Avg sectors/track: 1000 Surfaces: 4 Sector size: 512 bytes I was reading "Computer Systems: A Programmer's Perspective 2ed" when I found that it calculates transfer time as if it only uses ONE head to read a sector. If that's the case, why not use 4 heads to write(read) on 4 surfaces? So when I write a 2K bytes file, each head should only need to wait for the platters to rotate just one sector length instead of 4, thus reducing the transfer time by a factor of 4. Or even redesign sector to make each sector on one cylinder but on 4 tracks residing same position respectively on 4 surfaces. Each one of (512/4) bytes. So when the hd needs to read a sector of 512 bytes, we only need the disk to rotate roughly 1/4 compare to original time. The idea looks like RAID 0.

  Read the article

• Remote Desktop Multi Monitor Connection

  - by user196039

  This question may be a bit unusual but I think it's an interesting angle: Why does a remote desktop connection to my server with all four of my 30 inch (@2560x1600) monitors work, even though the server doesn't have a graphics card installed? I guess the graphics are perhaps not really rendered on the server? What exactly happens there so that this works? Searching for this I mostly found "how to enable multi monitor support" but not an answer to my question yet. Any links/documentation I can read to understand this better? (To get all four monitors working well on my local machine the one graphics card I had wasn't even enough, so I have two graphics cards on the local machine now) The operating systems are Windows 7 home premium and it's a Windows Server 2008 R2.

  Read the article

• Access Denied of a folder on a Drive

  - by kanchan bor gohain

  I wanted to restrict access of other people in a certain drive of my computer. What I did was go to the Security Tab (under Drive Properties) and remove the All Users entry. My account is an administrator account. I left only Systems and Administrator on the list. However, when I tried to access drive D, I got an Access Denied error, and Security Tab is already missing.i resolved the problem using safe mode way but i got another problem, I'd used command prompt to hide(attrib) a folder in drive D but i can't access it, though i can access all other files. I used cmd to unhide but access denied

  Read the article

• Nightly backups (and maybe other tasks) causing server alerts

  - by J. Pablo Fernández

  I have two independent alert notification systems for my servers. The server is a virtual machine on Linode and one of the alerts comes from Linode. The other monitoring system we use is New Relic. They are both watching out for IO utilization. Every night I get alerts from both of them as the server is using too much IO. I run quite a few tasks in the middle of the night but the one I confirmed that can cause IO-warnings is running the backups. The backup is done by s3cmd sync. I tried ionice but it still generates the warnings. Getting warnings every night reduces the efficacy of warnings when they happen for real. For Linode I could raise the level at which a warning is issued, but it might mean making the whole thing useless as the level is too high. What would be the proper solution for this?

  Read the article

• How to reference or vlookup a list of values based on a comma separated list of column references within a cell in excel?

  - by glallen

  I want to do a vlookup (or similar) against a column which is a list of values. This works fine for looking up a value from a single row, but I want to be able to look up multiple rows, sum the results, and divide by the number of rows referenced. For example: A B C D E F G [----given values----------------] [Work/Auth] [sum(vlookup(each(G),table,5)) /count(G)] [given vals] 1 Item Authorized OnHand Working Operational% DependencyOR% Dependencies 2 A 1 1 1 1 .55 B 3 B 10 5 5 .50 .55 C,D 4 C 100 75 50 .50 .60 D 5 D 10 10 6 .60 1 I want to be able to show an Operational Rate, and an operational rate of the systems each system depends on (F). In order to get a value for F, I want to sum over each value in column-E that was referenced by a dependency in column-G then divide by the number of dependencies in G. Column-G can have varying lengths, and will be a comma separated list of values from column-A. Is there any way to do this in excel?

  Read the article

• Does programmable hardware exist to allow hardware to be programmed by computers?

  - by agentbanks217

  I am a programmer and I have never really dealt with the hardware of anything, only software. I want to start building things that I can control from my computer using programming. My question is are there such devices on the market that have a programmable interface or API? For example, I want to build an automated window blinds opening/closing device, and I would like to be able to control it from my computer e.g. writing an app or some code to schedule them when to open and close. I would like to know if there are any devices that can be programmed to do that (the computer part)?

  Read the article

• Register a domain with NIC

  - by tandu

  I recently bought a .es domain for the purpose of creating a domain hack. I registered the domain with esreg.com (SANE Systems, apparently). My card was charged, but the domain is listed as not registered. I have not yet been able to get in contact with them. Their website seems to have a small form to register the site and to specify the nameservers, but when I fill it out it says "You have to specify the NIC handles first." I don't know how to get those. They have for example a box that says "Owner" with an example of SK86-ESNIC-F4. I have another website so I may have this information, but I don't know how to get it.

  Read the article

• Proxy server modifying request/response upon pass through

  - by jamiei

  I would like to set up a non-transparent proxy server that will selectively modify HTTP requests and responses as it passes them through. The motivation for wanting to modify the data on the fly and not at the original source are not part of the question. I'm hoping there is a solution which allows the modification scripts to be written in a mainstream programming language. I am aware of guides for Squid which allow you to flip images etc on the way through but I was hoping for a slightly more established and less hackish solution. Does anyone know of an established open source project or environment (Any major platform) which would allow me to script in arbitrary modifications to the data being passed through?

  Read the article

• 1 tera flop cluster?

  - by Adobe

  I want to buy a $40000 1 tera flop cluster to keep it in a room. What are the standard configurations? Cluster is supposed to do molecular dynamics simulations on biological systems. I'm proposed a 4 pc with 8 cores each by the selling company I'm deadling with. It looks like I also need infiniband. Does some one has an experience -- what phisical memory should I buy etc? I know things change very quickly... Still there might be a point or two to state. Edit: Custer is supposed to run linux, and gromacs in it.

  Read the article

• What data should I (can I) gather to prove a .net bug in third party software?

  - by gef05

  Our users are using a third-party system and every so often - a user might go all day without this happening, other days they may see it two or three times in seven hours - a red x will appear on screen rather than a button, field, or control. This is a .net system. Looking online I can see that this is a .net error. Problem is, our devs didn't write it, and the vendor wants proof that the problem resides with their system, not our PCs. What can we do to gather information on such an issue that would allow us to make our case to the vendor and get them to create a fix? I'm thinking of data to gather - anything from OS, memory. .net version installed etc. But I'd also like to know about error logging - if it's possible to log errors that occur in third-party systems.

  Read the article

• mirror sql server 2008 to AWS instance from our datacenter?

  - by Alex

  We are currenlty running on hosted pos system locally and would like to mirror to AWS. We are new to AWS and would like to know the most cost effective way to do this? We have 2 DB and 2 web servers right now in one cabinet in CA. One tape drive, one firewall, one SNA. We are thinking to replicate our system in AWS (using sql server 2008) and just mirror both systems and use a witness server between them to keep the data in sync? The goal is, if CA datacenter goes down, AWS keeps running. User see no downtime. All data is synced. Is anyone doing something similar? Would this be practical to just use AWS in this fashion? Thanks

  Read the article

• How to redirect a specific url through a proxy for multiple services?

  - by CrystalFire

  I have a website hosted on 000webhost.com for free. I am unable to connect directly to the site because Comcast has blocked a portion of 000webhost's servers for free accounts due to other people hosting malicious content. In order to maintain my website, I cannot use my computer to directly connect to the server. I am wondering if there is a way by which I can specifically forward attempts to access the server through a proxy, transparently. The current system that I am on is Windows, but I also have systems running Mac OSX and Linux, so solutions for any system could be fine. I've found answers which work for http, but I'm looking for a solution which will let me use all the other functions as well, such as ftp and ssh.

  Read the article

• Creating a new PC, need suggestions on parts [closed]

  - by zilentworld

  I want to build a new PC and went around PC Stores to ask for quotations with only some parts that i want and the rest are filled up by them. Here is the "best" i got Core i5 3550 4gb ram ddr3 (planning to get 8,no brand yet) 500gb hdd (no brand yet) GTX550Ti 1g DDR5 Asus P8H61 ATX Casing Here is what i have from my last PC: Huntkey green power 500w Hyper TX3 Evo I want a dual monitor pc which will be used mostly for gaming,programming and i do a lot of multitasking. Im not planning YET to OC my cpu but i will in the near future. So can i ask for suggestions on what to change on my list? my budget is about 800$ (including 2nd monitor)

  Read the article

• sync two huge filesystems

  - by guettli

  I need to sync two huge file systems. Both sides run linux with full root access. My preferred solution: I can read the list of changed files and directories and sync only the changed files. Here are some solutions and why they don't fit: rsync: Needs to check recursively all files. There are some million files and only little changes. The check takes too long. unison: the same: needs to check all files. inotify: I need a handler for every directory and there too many. Inotify was not build for "watch all files" scenarios. DRDB: Both sides should run independent.

  Read the article

• USB Permission - Write protection

  - by dekhadmai

  I have an external harddisk and my friends asked for it. The point is I don't trust in his anti-virus software. Is there anyway to allow some folders (I prepare hdd space for him) to write-able and all others is read-only ? or is there a software that can do like this ? And it would be great if I can have full access on my computer ONLY (may be with some specific software on my PC) and without having to modify anything. I don't ask for hdd-encryption since I only want to limit the area of write-able folder (and allow my friend to read through all my data), later I can scan for virus myself only in that area ... scanning entire hdd with 500gb/friend is not fun at all ! Sorry if this doesn't seems like the programming questions. Any help would be appreciate, Thank you.

  Read the article

• How to contact an Email Administrator at a large company?

  - by Brett G

  Before I've had to deal with other larger companies, client of ours, when we have had e-mail issues with them. Most of the time it's when our messages have been tagged as spam, although right now it's because one of their systems has gone haywire and is repeatedly sending us e-mails. Anyway, my question is how do you get in touch with the email administrator. I've found at some larger companies unless you have the name of the person, the receptionist will refuse to connect you to them (I'd imagine they're acting as the gatekeeper from salespeople asking for "the person responsible for dealing with your printers"). I know we could always try to deal with our contact at the company, but sometimes that can be slow and difficult and these issues are usually time sensitive.

  Read the article

• How do I get transparent, efficient, file system snapshotting or versioning on ext3/4?

  - by shovas

  I've long thought about versioning file systems. This is a killer feature and I've looked at Wayback, ext3cow, zfs, fuse solutions, or just cvs/svn/git overlays. I consider ext3cow the model for my requirements. Transparent, efficient, but I can do without the extra ls abc@timestamp feature. As long as I somehow get automated, transparent versioning of my files. It could be instantaneous or it could be based on snapshots on intervals of 10s, 30s, 1m, 5m, 15m, etc. Just something that will efficiently deal with thousands of files in a given directory all of various sizes, most small, but some upwards of 100m to 1gb. ZFS isn't really an option as I'm on linux (and would prefer not to use it through fuse as I already have an ext3 setup I want to version, not something new). What solutions are out there?

  Read the article

• Using windows 7 and fedora

  - by vedant1811

  I need to partition my hard disk for windows and fedora (root, swap, users). I thought of creating 3 (primary drives). 2 small ones (~5GB) each for win7 and fedora and a large (~700GB) for common files (pictures, vidoes, documents, etc.) one. Please Tell me which file systems to use in each case and the set-up of primary and extended partitions. Also I want to know, where and on which file system should the Linux Grub (my choice of OS chooser) be installed. I have just a bought a new Asus K53S and using the Fedora Installer Partitioner (Anaconda). Your help is greatly appreciated.

  Read the article

• What monitor specifications should be taken into consideration to avoid eye problems? [closed]

  - by coding crow

  I spent time programming on my 13.3" laptop for 8 to 10 hours a day. I was planning to buy a good monitor. Now that I have developed CVS buying a monitor has became an immediate priority. I have spend some time trying to understand what I should buy and why. I could only zero down on the size (20") and LED. So, I'm looking for advice on many other factors like resolution, pixel density, panel technology and so forth. What should I look for in a computer monitor to avoid further eye problems? Why?

  Read the article

< Previous Page | 496 497 498 499 500 501 502 503 504 505 506 507  | Next Page >