Search Results

Search found 18842 results on 754 pages for 'machine'.

Page 502/754 | < Previous Page | 498 499 500 501 502 503 504 505 506 507 508 509  | Next Page >

  • Why is my ftp connection timing out?

    - by NEPatriot
    This is the log info: Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (173,201,145,1,199,43) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing The strange thing is that I've set the transfer mode to active... I've called my hosting company support and they're able to connect to this server using my ftp credentials. I've also tried to connect on another machine on my network and have the same issue. Could it be the firewall? My ISP?

    Read the article

  • Stop Windows 7 from forcefully shutting itself down when waiting to update

    - by Kenneth
    I have had this happen to me twice now. I'll be in the middle of working on something that has resulted in me not rebooting my machine for several days. If Windows 7 is waiting to install updates it'll eventually get to a point where it forces a restart to install the updates. The problem is that it doesn't notify me or tell me that its going to do this and I've lost work as a result and most recently had a VM become corrupt and unusable. Is there a way to at least get it to prompt me before doing this? It used to...

    Read the article

  • X won't start, root filesystem mounted read only

    - by TK Kocheran
    I just experienced a very strange and puzzling problem on my machine that I can't seem to get sorted out. I was running Windows on a second partition, and everything was working great. I then went to restart into Linux, and noticed that X wouldn't start. Everything was displayed in super-low resolution, so I tried reinstalling my NVIDIA driver. I started seeing all of these I/O error problems, so I figured that my SSD was bad. After a bit more playing around, I ran fsck on the drive when mounted from a startup disk as well as badsectors and everything looked great. The SMART drive tests all passed and again, everything was looking good, so I rebooted again and still, no joy. I started then getting some weird USB errors, so I followed someone's advice and unplugged my computer's power supply, then started back up again and my graphics looked a lot better in the BIOS and in the boot logo, but X still wouldn't start. I then found out that my main boot drive was being mounted read-only for some reason. What's going wrong? I've done some pretty extensive tests on the SSD from a startup disk such as writing massive files, reading big files, running filesystem checks on the entire disk, and everything is looking great, until I try to boot. Whenever I try installing the drivers with apt-get, I get a ton of ata error messages looking like this: How can I diagnose what's going wrong and fix it so I can get back to work?

    Read the article

  • recommendation for configuration for a multi-core guestOS

    - by reidLinden
    Hi there, I've just received an upgraded Host machine, and am looking to push some of those advances to my workstations Guest OS(s). In particular, I used to have a single processor, with 2 cores, so my guestOS only had 1/1. Now, I've got a single processor with 8 cores, so I'm curious about what would be recommended for my GuestOS now? 1 processor/4 cores? 2 processors/2Cores? 4 processors/1 core? My instinct says to stick with the number of physical processors (or less), but, is that based on reality? I spent a good while looking for an answer to this, but perhaps my google-karma isn't in my favor today. Suggestions?

    Read the article

  • How to make Windows 7 Network show Samba share after VM is rebooted/restored?

    - by lackey
    On Windows 7, I have VirtualBox running Linux (Ubuntu 8.04), with Samba set up so that the Windows host can access it. But if the virtual machine is shut down & restored, or rebooted, the Windows Network no longer shows it. I've tried refreshing many times, restarting Samba, disabling/enabling the virtual network adapter, and running the succession of commands ipconfig /release, ipconfig /flushdns, & ipconfig /renew, but none worked. As a last resort I could restart the host itself, but is there a better way?

    Read the article

  • Create samba shortcut from command line

    - by neurolysis
    I'm currently wanting to deploy a setup to around 300 Macs. I have most of it scripted, but I'm having trouble creating a working alias to a samba share from the command line. I tried copying it from one Mac to another, but it loses its status as an alias, and instead OSX opens it in TextEdit. From a hexdump, it also looks like it has machine-specific information. So, say I wanted to create an alias to 'smb://server/share' on the desktop from the command line, how would I do that? I have also tried a tell in AppleScript, but it complained about the syntax (specifically, too many slashes, seemingly taking about smb://). Thanks.

    Read the article

  • How to prevent people taking software home?

    - by Robert MacLean
    Most companies I have worked at have had either a collection of disks or a network share with the installs of the commonly used software in them. This is to allow the IT dept and skilled users to install the software they need on their work machines very easily. However some users would see this as an opportunity to get "free" software for their home machines. I've seen the draconian approach of locking the machine down completely, but that does not work well (in my view - if you disagree feel free to comment on it) because You add so much extra work to IT Users get that big brother feeling So how do you find a way to prevent users from taking home software but still allowing them to install what they need? You can make the assumption that most of the users in the organisations I work in are smart enough to install software, I'm not worried about the tea lady here.

    Read the article

  • Creating a Scheduled Task that runs forever on Windows XP

    - by Mike Fiedler
    When I create a scheduled task, I do so via command line: schtasks.exe /Create /TN "startup-script" /TR "C:\startup.bat" /RU taskuser /RP taskpasswd /SC ONLOGON The idea is that this task run forever. The batch opens a java process that is never meant to end. I've used ONLOGON, as the machine auto-logs in as taskuser. All this works fine, for about 72 hours, after which the Duration flag kicks in and ends the process. Windows XP doesn't have the /DU flag on command line - is there an alternative method to creating a task that is meant to run from a system startup (doesn't even require logon) and runs forever, without touching a GUI?

    Read the article

  • Getting More Performance out of a MacBook Pro

    - by 5arx
    So I've got a mid-2009 MacBook Pro 13". Integrated GPU so not a games machine but fast enough for doing .Net development in VMs. I love the little thing and wanted to give it a Christmas present so thought I'd mod it up a bit and give it a boost. I'm thinking of swapping out the stock 5400rpm HD with a faster hybrid drive (has 4GB RAM and spins at 7200rpm) but was wondering if any of you had tried or knew of anything else I could change/upgrade/mod to squeeze more out of my laptop. Before you answer though, please be aware that I'm not sure I can run to putting in the 8GB of RAM Apple have suggested :-( Thanks in advance.

    Read the article

  • misaligned raid partition in Ubuntu 10.04

    - by Linux Jedi
    I attached two identical hard drives to my linux machine. Then using gparted I formated the first 1024 mb at the beginning of each drive as linux swap space. Then I went into system-administration-disk utility. In there I went to file-create-RAID array. I selected the remaining space in each of the two identical hard drives and created a striped raid array. After the array was created, a warning message appeared. It said "The partition is misaligned by 522240 bytes. This may result in very poor performance. Repartitioning is suggested." What do I do now? As far as I can tell, the partitions are identical.

    Read the article

  • How did Google get on my Mac?

    - by SamGoody
    Am running a MacBook Pro, and have never installed Chrome, Google Earth, or anything blatantly Google. Just installed Little Snitch (are there no good free firewalls for Mac?) and see that CURL is sending to Google every few minutes, as is a request to Google update and more. Little Snitch doesn't say what program setup these requests. So, how do I find out how G got on my machine, why is it sending so many requests (every minute or so) and how do I remove it (and is it there for reasons other than to help G spy on me)?

    Read the article

  • Transfer Win8 user settings between profiles [closed]

    - by GlennFerrieLive
    Possible Duplicate: How do I sync grouped Windows Store apps between devices? Is there a way for me to copy/save/transfer my "start menu" configuration, meaning the grouping and ordering of the elements on the Start screen, between user profiles? Is it in the registry? I am open to manual or "coded" suggestions. UPDATE: I'd like to VETO this closing. I am aware of the "roaming" profile behavior. I want to COPY my configuration BETWEEN profiles on the same machine.... DIFFERENT profile DIFFERENT person. I like the way my start screen is set up. i want to set my wife up with the same layout.

    Read the article

  • Configuring php with apache

    - by R11
    I managed to thoroughly confuse myself with php configuration in my apache install (on a mac). I am trying to get xdebug to work in eclipse and noticed that there are two different installs of php on my machine. The one (v5.4.5) in the apache install directory /opt/local/apache2/ and another one (v5.3) in the default system directory /usr/bin. My questions are: The php in the apache install directory was installed by me from source. But it does not have a php.ini file, instead it has PEAR.conf and other bunch of conf files. What are they and did I install something wrong? Can I compile apache with php support and have it use the php from the system directory right? How do I know which php its using? httpd -M is the only command i can see. Can I force apache to use a different php?

    Read the article

  • why doesn't my computer resume after sleeping overnight?

    - by bamdad
    i'm having a weird, weird bug that's been haunting me since 11.10. if i listen to music or watch a video and my computer automatically goes to sleep at night, it won't properly resume in the morning. otherwise, suspend and resume works just fine. what happens is that the wi-fi and bluetooth indicator (that turns from white to orange when suspending) stays orange, the display doesn't turn on, and the only option i have is to hard reset the machine. here's what i've tried so far: installing (and uninstalling and reinstalling) laptop-mode-tools switching the proprietary wireless driver (broadcom-wl) to the open source one (brcmsmac & bcma) and back unloading (and blacklisting) all bluetooth modules (rfcomm, btusb, bnep, bluetooth) and stopping (# stop bluetooth) and disabling (# echo 'manual' /etc/init/bluetooth.override) the bluetooth service creating a custom pm sleep action as suggested here: http://ubuntuforums.org/showthread.php?p=11926504 not watching youtube / any stuff that uses flash before going to sleep (i have flashblock, and i checked $ ps aux | grep flash) because i suspected flash to be the culprit trying out different versions of fglrx (the one from the repos, then installing the latest one from amd's site via generated .deb files, then back to the official ones) none of these worked. i remember back in the days of 10.04, there was a gconf key called network sleep: i thought about disabling that, since re-enabling the wireless card seems to be the problem (according to the indicator led), but the option appears to be missing from gnome 3 (unity-2d, whatever). does anyone have any ideas? thanks, bamdad

    Read the article

  • ubuntu 12.04 - keep getting "Server not found" for some websites

    - by android developer
    ever since last week , i've noticed that many websites cannot be accessed , and it doesn't matter if i use firefox or chromium as a web browser . as an example of such a website is: http://tutorials-android.blogspot.co.il/2011/05/layout-animation-in-android.html all i get is a "Server not found" error page . sometimes after a few refreshes it works just fine . i've checked it on a windows OS machine that is connected to the exact same LAN network , and the website is shown just fine . i've also checked the /etc/hosts file and it doesn't contain anything suspicious . what is going on? how can i fix it?

    Read the article

  • Fix two-finger Trackpad Scrolling on a Macbook running Bootcamp

    - by roryok
    This is an issue that's annoyed me for some time. About a year ago, the two-finger scrolling in Windows 7 on my Macbook Pro stopped working. I discovered that a fix for this is to open Bootcamp from the control panel, go to the Trackpad tab, tick and untick "Tap to click" and click ok. This has to be done every time the machine is woken from sleep or rebooted. I'm now using Windows 8 and encountering the same issue. I've tried several different driver revisions, and none have helped. I'm sick of going through the motions. Has anyone got a solution for this?

    Read the article

  • Own hosting, own domain on Virtualbox Ubuntu server - dynamic IP

    - by Pawel
    Hi, I have bought my TLD domain, say domain.com. What I'd like to do is to host the website available under this address on my own computer. I'm assigned a dynamic IP, and I'm also behind a router in my local network. I'd run sites on my ubuntu server on a virtualbox machine which is available in my local network. Preferably, I'd like to have my own domain on some server, with which I could experiment as much as I need (so it's only for educational purposes), but I can't afford to buy such a service. Is it feasible? Can you provide steps I'd need to take to configure it (could be just general explanation). I'd need some guidance, please.

    Read the article

  • Set origin for forwarder based on virtual domain in Postfix

    - by Andrew Koester
    I currently have a machine set up to operate with two domains. The main name uses the standard Unix-user delivery, and the second domain is entirely virtual (using virtual_alias_domains and virtual_alias_maps), with the second domain only forwarding mail. However, when mail is forwarded, it still appears to be delivered by the host of the primary domain (presumably set by myorigin.) Is it possible to get it so when mail is forwarded to the virtual domain, it appears to be delivered by it as well? That domain is on another IP and I'd like to use it so the mail stays consistent. Thanks.

    Read the article

  • Cannot connect to IIS 7 from localhost

    - by Wout
    I cannot connect to the local IIS 7 using "http://localhost" in IE. "http://127.0.0.1" doesn't work either. The strange thing is that if I add a binding on e.g. port 81, then I can reach "http://localhost:81". Also turning off the firewall on the local machine doesn't help. The site is reachable from the internet. The local requests don't seem to hit IIS (no entries in the IIS log files). IIS is hosted on Windows Server 2008 R2 from behind a hardware firewall device. Note that I'm a programmer, not a network administrator, so I'm having a hard time trouble shooting this.

    Read the article

  • Likelihood of a hard drive PCB replacement working?

    - by Grant Limberg
    I have a 1.5TB Seagate 7200.11 that died. The platter still spins up initially when attached to a machine, but then the drive clicks and spins down. Then the cycle repeats. I've found a few sites that sell replacement PCBs, however I don't know if the PCB is the issue, or something else. Given the symptoms above, is it at all likely that a PCB replacement would help? If not, I won't waste my money on the PCB replacement. Note: I put the drive in an external ESATA controller and tried hooking it up to a Linux box here at work and got some error messages in the logs. I can post them if anyone thinks it will help in determining whether a PCB swap would fix the problem I'm running into.

    Read the article

  • CentOS, CUPS - printer managment

    - by HTF
    I'm using CentOS 6.3, and trying to get a printer PIXMA iP4950 to work. The printer is attached via USB. I've downloaded and installed the drivers from the Cannon website, and have the printer installed in CUPS. However, when I print anything (even the test page), the job is completed successfully (according to CUPS-log), but the printer does not print a thing. I don't know how to debug this. Have tried to change logging to debug, but I don't see any errors in the error_log and the access_log says: Returning IPP successful-ok for Get-Jobs (ipp://localhost:631/printers/Canon_iP4900_series) from localhost Please note that I was able to print on another CentOS machine however with GNOME Desktop.

    Read the article

  • Displaying Datamatrix in application error screen

    - by DaveNay
    Quite often we will get a report from a user in the field saying there was an error in our application. Frequently this leads to the typical round of "What was the error?" "I don't know, it was just an error." We of course log these faults to the log files, and we can even enable detailed debug logs, but this involves the end user changing a setting in the configuration file and then finding the correct files and then emailing them to us. As I'm sure you can all imagine, there are plenty of pitfalls and alligators in this methodology. Recently a couple of people have used their cell phone to email me a "screen capture" of the fault, and while this helps, we still have to scrutinize the image to find the exact fault, and if enabled, the stack trace. So this evening, I had the brilliant idea (IMHO) to encode the fault into a Datamatrix barcode image and then encourage users to send me a picture from their cell phone. I can then decode the datamatrix and get a parse-able error message! Our core technology is machine vision, so the decoding of the datamatrix image would be trivial, I just need to find a method of generating the actual image to display in the fault handler. Thoughts?

    Read the article

  • Create Report in Microsoft Excel - Permissions Issue in Team Foundation Server 2010

    - by sammarcow
    I am trying to use the feature "Create a Report in Microsoft Excel" for Visual Studio TFS 2010. I am being prompted for a username and password in Excel for any given Team Project when right clicking the item "Active Tasks", selecting "Create a Report in Microsoft Excel," found in the following path within the Team Explorer pane, from Visual Studio 2010: 'Collection Name' | 'Project Name' | Work Items | Iteration 1 | Active Tasks I am a Team Project Administrator and Collection Administrator. I checked The SharePoint site: http :// 'serverName'/Reports/Pages/Folder.aspx and have full sitewide and project permissions on this site. I loaded SQL Server Management Studio on the machine running the instance of TFS (and also the SQL backend for TFS) and ensured that I had roles "serveradmin" and "sysadmin". How do I run this report? Specifically, what permissions are required?

    Read the article

  • Tomcat 5.5 - second application returs 404

    - by Tomas Tintera
    There are two versions of web application. Want to have both on one machine so I can test upgrade. If there is one of them copied to Tomcat's webapplications directory and then Tomcat is started, it works fine. So if there is only have only ...webapplicatios\ROOT\... ...webapplicatios\myApp25\... it works fine. Or when there is only ...\webapps\ROOT\... ...\webapps\myApp26\... it works fine too. If I upload both ...\webapps\ROOT and ...\webapps\myApp25 ...\webapps\myApp26 only one of the apps will work. The other one returns 404, page not found. It's running on Windows7 and I use Tomcat 5.5. Tomcat is just default installation. Any idea what to check? How to make both running both apps? Thank you in advance for any help. I'm beginner regarding TC.

    Read the article

  • Opening firewall to incoming port 443

    - by jrdioko
    I recently set up the ufw firewall on a Linux machine so that outgoing connections are allowed, incoming connections are denied, and denied connections are logged. This seems to work fine for most cases, but I see many denied connections that are incoming on port 443 (many with IPs associated with Facebook). I can open that port to incoming connections, but first wanted to ask what these could be. Shouldn't HTTPS requests be initiated by me and be treated as outbound, not inbound connections? Is it typical to open incoming port 443 on consumer firewalls?

    Read the article

< Previous Page | 498 499 500 501 502 503 504 505 506 507 508 509  | Next Page >