Search Results

Search found 30117 results on 1205 pages for 'thread specific storage'.

Page 503/1205 | < Previous Page | 499 500 501 502 503 504 505 506 507 508 509 510  | Next Page >

  • Would you re-design completely under .Net?

    - by dboarman
    A very extensive application began as an Access-based system (for database storage). Forms were written in VB5 and/or VB6. As .Net became a fixture in the development community, certain modules have been rewritten. This seems very awkward and potentially costly just to maintain because of the cross-technologies and extra work to keep the two technologies happy with each other. Of course, the application uses a mix of ODBC OleDb and MySql. Would you think spending the time and resources to completely re-develop the application under .Net would be more cost effective? In an effort to develop a more stable application, wouldn't it make sense to use .Net? Or continue chasing Access bugs, adding new features in .Net (which may or may not create new bugs between .Net and Access), and rewriting old Access modules into .Net modules under time constraints that prevent proper design and development? Update The application uses OleDb and MySql - I corrected my previous statement. Also, to lend further support to rewriting: I have since found out that when the "porting" to .Net began, the VBA/VB6 code that existed was basically translated to the .Net equivalent. From my understanding, nothing was done to improve performance, or take advantage of new libraries or technologies. In my opinion, this creates a very fragile and unstable application. With every new update, this becomes more and more visible. As a help desk technician, I have noticed an increase in problems reported. The customers using the software have noticed an increase in problems and are commenting on it.

    Read the article

  • ASP.NET Connections Fall 2011 Slides and Code

    - by Stephen Walther
    Thanks everyone who came to my talks at ASP.NET Connections in Las Vegas!  There was a definite theme to my talks this year…taking advantage of JavaScript to build a rich presentation layer. I gave the following three talks: JsRender Templates – Originally, I was scheduled to give a talk on jQuery Templates.  However, jQuery Templates has been deprecated and JsRender is the new technology which replaces jQuery Templates. In the talk, I give plenty of code samples of using JsRender.  You can download the slides and code samples RIGHT HERE   HTML5 – In this talk, I focused on the features of HTML5 which are the most interesting to developers building database-driven Web applications. In particular, I discussed Web Sockets,  Web workers, Web Storage, Indexed DB, and the Offline Application Cache. All of these features are supported by Safari, Chrome, and Firefox today and they will be supported by Internet Explorer 10. You can download the slides and code samples RIGHT HERE   Ajax Control Toolkit – My company, Superexpert, is responsible for developing and maintaining the Ajax Control Toolkit. In this talk, I discuss all of the bug fixes and new features which the developers on the Superexpert team have added to the Ajax Control Toolkit over the previous six months. We also had a good discussion of the features which people want in future releases of the Ajax Control Toolkit. The slides and code samples for this talk can be downloaded RIGHT HERE   I had a great time in Las Vegas!  Good questions, friendly audience, and lots of opportunities for me to learn new things!      -- Stephen

    Read the article

  • Suggested Web Application Framework and Database for Enterprise, “Big-Data” App?

    - by willOEM
    I have a web application that I have been developing for a small group within my company over the past few years, using Pipeline Pilot (plus jQuery and Python scripting) for web development and back-end computation, and Oracle 10g for my RDBMS. Users upload experimental genomic data, which is parsed into a database, and made available for querying, transformation, and reporting. Experimental data sets are large and have many layers of metadata. A given experimental data record might have a foreign key relationship with a table that describes this data point's assay. Assays can cover multiple genes, which can have multiple transcript, which can have multiple mutations, which can affect multiple signaling pathways, etc. Users need to approach this data from any point in those layers in the metadata. Since all data sets for a given data type can run over a billion rows, this results in some large, dynamic queries that are hard to predict. New data sets are added on a weekly basis (~1GB per set). Experimental data is never updated, but the associated metadata can be updated weekly for a few records and yearly for most others. For every data set insert the system sees, there will be between 10 and 100 selects run against it and associated data. It is okay for updates and inserts to run slow, so long as queries run quick and are as up-to-date as possible. The application continues to grow in size and scope and is already starting to run slower than I like. I am worried that we have about outgrown Pipeline Pilot, and perhaps Oracle (as the sole database). Would a NoSQL database or an OLAP system be appropriate here? What web application frameworks work well with systems like this? I'd like the solution to be something scalable, portable and supportable X-years down the road. Here is the current state of the application: Web Server/Data Processing: Pipeline Pilot on Windows Server + IIS Database: Oracle 10g, ~1TB of data, ~180 tables with several billion-plus row tables Network Storage: Isilon, ~50TB of low-priority raw data

    Read the article

  • Block Fortress is an Awesome Tower Defense Game

    - by Akemi Iwaya
    What do you get when you mix Minecraft, tower defense, and a first-person shooter together? Block Fortress! This awesome game combines the best aspects of three game types into one unique, action-packed romp for survival and victory. Keep in mind that the game has quite a bit going on, so we will only be able to offer a quick glimpse with our post. Also, it may take a few minutes to become familiar with how to maneuver around in the game area using various gestures on your device’s screen. From the Block Fortress homepage: It offers more than 30 different building blocks, 16 different turret blocks, and tons of additional items to build (including mining blocks, lumber blocks, storage crates, power generators, and much more). It also includes many different weapon and item upgrades for your character – all brought to bear against the relentless attacks of the Goblocks! Block Fortress currently comes with three modes of game play: Survival, Quickstart, and Sandbox. As you can see, there should be more modes available at a later date. There are many types of terrain to choose from, or if you wish you can select Random for a nice surprise. For our example we chose Snowy Hills. Time to have a look around and find a nice spot to set up our barracks… This spot looks like it will do rather nicely… Just for fun we set up a castle-style set of walls and entry point for our barracks. Now on to fun and adventure! You can see what the game looks like in action with the official launch trailer… Price: 0.99 (U.S.) Block Fortress [iTunes App Store] Block Fortress Homepage Official Block Fortress Launch Trailer [YouTube]    

    Read the article

  • Path is too long

    - by kaleidoscope
    Bugged by the irritating "Path is too long after being fully qualified" error while running in the Development Fabric? The solution is pretty funny and not so obvious unfortunately. The culprit here is not your app, but the Development Fabric. The DevFab accumulates a lot of temporary junk comprising of local storage locations, cached binaries, configuration, diagnostics information and cached compiled web site content files over its lifetime. They are typically stored at C:\Users\<username>\AppData\Local\dftmp. The Azure Tools will periodically clean this up, but some time you have to play janitor and take the law in your hands ;). The csrun.exe has quite a few tricks up its sleeve. One of them is the ability to clean the development fabric's temporary junk accumulated over time. You can do this by  running the Azure command prompt with elevated privileges and running csrun.exe /devfabric:shutdown and then csrun.exe /devfabric:clean If the problem still persists then the application directory structure could indeed be too long. A workaround to this is changing the Development Fabric temporary directory to point to a shorter path. The temporary directory path can be addressed by an environment variable _CSRUN_STATE_DIRECTORY. You can try setting its value to something like "C:\WA" or "C:\A" this will reduce some 25+ characters from your path. Do not forget to close Visual Studio and expressly shutdown the dev fab with csrun.exe /devfabric:shutdown (Under elevated privileges of course). Source: http://geekswithblogs.net/IUnknown/archive/2010/02/03/no-more-path-is-too-long.aspx  :D   Sarang, K

    Read the article

  • On mobile is there a reason why processes are often short lived and must persist their state explicitly?

    - by Alexandre Jasmin
    Most mobile platforms (such as Android, iOS, Windows phone 7 and I believe the new WinRT) can kill inactive application processes under memory pressure. To prevent this from affecting the user experience applications are expected to save and restore their state as their process is killed and restarted. Having application processes killed in this way makes the developers job harder. On various occasions I've seen a mobile app that would: Return to the welcome screen each time I switch back to it. Crash when I switch back to it (possibly accessing some state that no longer exists after the process was killed) Misbehave when I switch back to it (sometimes requiring a restart or tasks killer to fix) Otherwise misbehave in some hard to reproduce way (e.g. android service killed and restarted at the wrong time) I don't really understand why these mobile operating systems are designed to kill tasks in this way especially since it makes application development more difficult and error prone. Desktop operating systems don't kill processes like that. They swap out unused pages of memory to mass storage. Is there a reason why the same approach isn't used on mobile? Mobile hardware is only a few years behind PC hardware in term of performance. I'm sure there are very good reasons why mobile operating systems are designed this way. If you can point me to a paper or blog post that explain these reasons or can give me some insight I'd very much appreciate it.

    Read the article

  • BI and EPM Landscape

    - by frank.buytendijk
    Most of my blog entries are not about Oracle products, and most of the latest entries are about topics such as IT strategy and enterprise architecture. However, given my background at Gartner, and at Hyperion, I still keep a close eye on what's happening in BI and EPM. One important reason is that I believe there is significant competitive value for organizations getting BI and EPM right. Davenport and Harris wrote a great book called "Competing on Analytics", in which they explain this in a very engaging and convincing way. At Oracle we have defined the concept of "management excellence" that outlines what organizations have to do to keep or create a competitive edge. It's not only in the business processes, but also in the management processes. Recently, Gartner published its 2009 market shares report for BI, Analytics, and Performance Management. Gartner identifies the same three segments that Oracle does: (1) CPM Suites (Oracle refers not to Corporate Performance Management, but Enterprise Performance Management), (2) BI Platform, and (3) Analytic Applications & Performance Management. According to Gartner, Oracle's share is increasing with revenue growing by more than 5%. Oracle currently holds the #2 market share position in the overall BI Software space based on total BI software revenue. Source: Gartner Dataquest Market Share: Business Intelligence, Analytics and Performance Management Software, Worldwide, 2009; Dan Sommer and Bhavish Sood; Apr 2010 Gartner has ranked Oracle as #1 in the CPM Suites worldwide sub-segment based on total BI software revenue, and Oracle is gaining share with revenue growing by more than 6% in 2009. Source: Gartner Dataquest Market Share: Business Intelligence, Analytics and Performance Management Software, Worldwide, 2009; Dan Sommer and Bhavish Sood; Apr 2010 The Analytic Applications & Performance Management subsegment is more fragmented. It has for instance a very large "Other Vendors" category. The largest player traditionally is SAS. Analytic Applications are often meant for very specific analytic needs in very specific industry sectors. According to Gartner, from the large vendors, again Oracle is the one who is gaining the most share - with total BI software revenue growth close to 15% in 2009. Source: Gartner Dataquest Market Share: Business Intelligence, Analytics and Performance Management Software, Worldwide, 2009; Dan Sommer and Bhavish Sood; Apr 2010 I believe this shows Oracle's integration strategy is working. In fact, integration actually is the innovation. BI and EPM have been silo technology platforms and application suites way too long. Management and measuring performance should be very closely linked to strategy execution, which is the domain of other business application areas such as CRM, ERP, and Supply Chain. BI and EPM are not about "making better decisions" anymore, but are part of a tangible action framework. Furthermore, organizations are getting more serious about ecosystem thinking. They do not evaluate single tools anymore for different application areas, but buy into a complete ecosystem of hardware, software and services. The best ecosystem is the one that offers the most options, in environments where the uncertainty is high and investments are hard to reverse. The key to successfully managing such an environment is middleware, and BI and EPM become increasingly middleware intensive. In fact, given the horizontal nature of BI and EPM, sitting on top of all business functions and applications, you could call them "upperware". Many are active in the BI and EPM space. Big players can offer a lot, but there are always many areas that are covered by specialty vendors. Oracle openly embraces those technologies within the ecosystem as well. Complete, open and integrated still accurately describes the Oracle product strategy. frank

    Read the article

  • Webcast: Best Practices for Speeding Virtual Infrastructure Deployment with Oracle VM

    - by Honglin Su
    We announced Oracle VM Blade Cluster Reference Configuration last month, see the blog. The new Oracle VM blade cluster reference configuration can help reduce the time to deploy virtual infrastructure by up to 98 percent when compared to multi-vendor configurations. Customers and partners have shown lots of interests. Join Oracle's experts to learn the best practices for speeding virtual infrastructure deployment with Oracle VM, register the webcast (1/25/2011) here.   Virtualization has already been widely accepted as a means to increase IT flexibility and help IT services align better with changing business needs. The flexibility of a virtualized IT infrastructure enables new applications to be rapidly deployed, capacity to be easily scaled, and IT resources to be quickly redirected. The net result is that IT can bring greater value to the business, making virtualization an obvious win from a business perspective. However, building a virtualized infrastructure typically requires assembling and integrating multiple components (e.g. servers, storage, network, virtualization, and operating systems). This infrastructure must be deployed and tested before applications can even be installed. It can take weeks or months to plan, architect, configure, troubleshoot, and deploy a virtualized infrastructure. The process is not only time-consuming, but also error-prone, making it hard to achieve a timely and profitable return on investment.  Oracle is the only vendor that can offer a fully integrated virtualization infrastructure with all of the necessary hardware and software components. The Oracle VM blade cluster reference configuration is a single-vendor solution that addresses every layer of the virtualization stack with Oracle hardware and software components, see the figure below. It enables quick and easy deployment of the virtualized infrastructure using components that have been tested together and are all supported together by Oracle. To learn more about Oracle's virtualization offerings, visit http://oracle.com/virtualization.

    Read the article

  • IntelliTrace As a Learning Tool for MVC2 in a VS2010 Project

    - by Sam Abraham
    IntelliTrace is a new feature in Visual Studio 2010 Ultimate Edition. I see this valuable tool as a “Program Execution Recorder” that captures information about events and calls taking place as soon as we hit the VS2010 play (Start Debugging) button or the F5 key. Many online resources already discuss IntelliTrace and the benefit it brings to both developers and testers alike so I see no value of just repeating this information.  In this brief blog entry, I would like to share with you how I will be using IntelliTrace in my upcoming talk at the Ft Lauderdale ArcSig .Net User Group Meeting on April 20th 2010 (check http://www.fladotnet.com for more information), as a learning tool to demonstrate the internals of the lifecycle of an MVC2 application.  I will also be providing some helpful links that cover IntelliTrace in more detail at the end of my article for reference. IntelliTrace is setup by default to only capture execution events. Microsoft did such a great job on optimizing its recording process that I haven’t even felt the slightest performance hit with IntelliTrace running as I was debugging my solutions and projects.  For my purposes here however, I needed to capture more information beyond execution events, so I turned on the option for capturing calls in addition to events as shown in Figures 1 and 2. Changing capture options will require us to stop our debugging session and start over for the new settings to take place. Figure 1 – Access IntelliTrace options via the Tools->Options menu items Figure 2 – Change IntelliTrace Options to capture call information as well as events Notice the warning with regards to potentially degrading performance when selecting to capture call information in addition to the default events-only setting. I have found this warning to be sure true. My subsequent tests showed slowness in page load times compared to rendering those same exact pages with the “event-only” option selected. Execution recording is auto-started along with the new debugging session of our project. At this point, we can simply interact with the application and continue executing normally until we decide to “playback” the code we have executed so far.  For code replay, first step is to “break” the current execution as show in Figure 3.   Figure 3 – Break to replay recording A few tries later, I found a good process to quickly find and demonstrate the MVC2 page lifecycle. First-off, we start with the event view as shown in Figure 4 until we find an interesting event that needs further studying.  Figure 4 – Going through IntelliTrace’s events and picking as specific entry of interest We now can, for instance, study how the highlighted HTTP GET request is being handled, by clicking on the “Calls View” for that particular event. Notice that IntelliTrace shows us all calls that took place in servicing that GET request. Double clicking on any call takes us to a more granular view of the call stack within that clicked call, up until getting to a specific line of code where we can do a line-by-line replay of the execution from that point onwards using F10 or F11 just like our typical good old VS2008 debugging helped us accomplish. Figure 5 – switching to call view on an event of interest Figure 6 – Double clicking on call shows a more granular view of the call stack. In conclusion, the introduction of IntelliTrace as a new addition to the VS developers’ tool arsenal enhances development and debugging experience and effectively tackles the “no-repro” problem. It will also hopefully enhance my audience’s experience listening to me speaking about  an MVC2 page lifecycle which I can now easily visually demonstrate, thereby improving the probability of keeping everybody awake a little longer. IntelliTrace References: http://msdn.microsoft.com/en-us/magazine/ee336126.aspx http://msdn.microsoft.com/en-us/library/dd264944(VS.100).aspx

    Read the article

  • Why is IaaS important in Azure&hellip;

    - by Steve Loethen
    Three weeks ago, Microsoft released the next phase of Azure.  I have had several clients waiting on this release.  The fact that they have been waiting and are now more receptive to looking at the cloud.  Customers expressed fear of the unknown.  And a fear of lack of control, even when that lack of control also means a huge degree of flexibility to innovate with concerns about the underlying infrastructure.  I think IaaS will be that “gateway drug” to get customers who have been hesitant to take another look at the cloud.  The dialog can change from the cloud being this big scary unknown to a resource for workloads.  The conversations should have always been, and can know be even stronger, geared toward the following points: 1) The cloud is not unicorns and glitter, the cloud is resources.  Compute, storage, db’s, services bus, cache…..  Like many of the resources we have on-premise.  Not magic, just another resource with advantages and obstacles like any other resource. 2) The cloud should be part of the conversation for any new project.  All of the same criteria should be applied, on-premise or off.  Cost, security, reliability, scalability, speed to deploy, cost of licenses, need to customize image, complex workloads.  We have been having these discussions for years when we talk about on-premise projects.  We make decisions on OS’s, Databases, ESB’s, configuration and products based on a myriad of factors.  We use the same factors but now we have a additional set of resources to consider in our process. 3) The cloud is a great solution looking for some interesting problems.  It is our job to recognize the right problems that fit into the cloud, weigh the factors and decide what to do. IaaS makes this discussion easier, offers more choices, and often choices that many enterprises will find more better than PaaS.  Looking forward to helping clients realize the power of the cloud.

    Read the article

  • Consolidating and Virtualizing with Oracle&rsquo;s Network Fabric

    - by Ferhat Hatay
    Server, storage and operating system virtualization technologies are already widely  deployed within datacenters, and are considered an integral component to drive cost  savings and agility. These technologies are now being combined with network  virtualization to usher in a new era of cloud computing. Oracle provides a networking fabric that delivers cloud-ready network services based on  Ethernet or InfiniBand fabrics that are tightly integrated with application infrastructure. Oracle’s network fabric provides the performance and manageability required for any  Oracle application environment or private cloud infrastructure. Logical architecture of Oracle’s network fabric. Oracle’s unique ability to deliver extreme performance and scale by tightly integrating  network services across application infrastructure is demonstrated in the Oracle Exalogic  Elastic Cloud and the Oracle Exadata Database Machine. These engineered solutions  offer up to 5X and 10X performance gains respectively compared to traditional multivendor architectures where the offerings are not engineered to work together. By integrating advanced networking capabilities across the entire hardware and software  stack, Oracle’s network fabric can help maximize application performance and scale,  reduce the number of network components, and simplify datacenter operations through  integrated network management and orchestration. The resulting business benefits are: Reduced acquisition costs Lower power and cooling costs Reduced management costs Faster deployment Greater agility in meeting changing business needs For more information see the whitepaper: Consolidating and Virtualizing Datacenter Networks with Oracle's Network Fabric.

    Read the article

  • CodePlex Daily Summary for Friday, July 19, 2013

    CodePlex Daily Summary for Friday, July 19, 2013Popular ReleasesuComponents: uComponents v5.5.0: Following on from our 101355 release, we bring you... v5.5.0! Resolved issues The following issues have been resolved in 5.5.0: 14634 14848 DataType Grid 14840 14842 14845 UpgradingThe best way to upgrade uComponents is to re-install via Umbraco's back-office package installer, (either from the package repository or a local package upload). Do not uninstall an existing uComponents package, as this may lead to data loss! Umbraco compatibilityThis release is compatible with Umbraco 4...51Degrees.mobi - Mobile Device Detection and Redirection: 2.1.19.4: One Click Install from NuGet This release introduces the 51Degrees.mobi IIS Vary Header Fix. When Compression and Caching is used in IIS, the Vary header is overwritten, making intelligent caching with dynamic content impossible. Find out more about installing the Vary Header fix. Changes to Version 2.1.19.4Handlers now have a ‘Count’ property. This is an integer value that shows how many devices in the dataset that use that handler. Provider.cs -> GetDeviceInfoByID to address a problem w...SalarDbCodeGenerator: SalarDbCodeGenerator v2.1.2013.0719: Version 2.1.2013.0719 2013/7/19 Pattern Changes: * DapperContext pattern is added. * All patterns are updated to work with one-to-one relations. Changes: * One-to-one relation is supported. * Minor bug fixes.Scryber PDF Generation: Scryber.Installer.v0.8.3: This one has tables! A significant update to the scryber library, with the inclusion of tables. There is no column span, or row span, and nested tables are not fully supported. But - they overflow nicely and are well styled. And they can be data bound. Other updates The Link element has inner components directly as a child, rather than in a Content element. The existing files will still continue to work, but are invalid wrt the schema. Databinding is now supported at the document level, r...Player Framework by Microsoft: Player Framework for Windows and WP (v1.3 beta 2): Includes all changes in v1.3 beta 1 Additional support for Windows 8.1 Preview New API (JS): addTextTrack New API (JS): msKeys New API (JS): msPlayToPreferredSourceUri New API (JS): msSetMediaKeys New API (JS): onmsneedkey New API (Xaml): SetMediaStreamSource method New API (Xaml): Stretch property New API (Xaml): StretchChanged event New API (Xaml): AreTransportControlsEnabled property New API (Xaml): IsFullWindow property New API (Xaml): PlayToPreferredSourceUri proper...Outlook 2013 Add-In: Multiple Calendars: As per popular request, this new version includes: - Support for multiple calendars. This can be enabled in the configuration by choosing which ones to show/hide appointments from. In some cases (public folders) it may time out and crash, and so far it only supports "My Calendars", so not shared ones yet. Also they're currently shown in the same font/color so there are no confusions with color categories, but please drop me a line on any suggestions you'd like to see implemented. - Added fri...GoAgent GUI: GoAgent GUI 1.2.0 ???: *???????,??????????????,?????????????? ????????* ????????(Beta) Beta????:https://goagent.codeplex.com/workitem/list/basic ??????:uygw@outlook.com ????:https://goagent.codeplex.com/documentation ?????????????????。Circuit Diagram: Circuit Diagram 2.0 Beta 2: New in this release: Show grid in editor Cut/copy/paste support Bug fixesAscend 3D: Ascend (2013-07-17): Ascend 2.1 Animation bugfixes and speed/robustness improvements Added compatibility for multiple top-level bones on armatures Ascend Blender Exporter 2.1 Removed need to create parent-child relationship between armature and skinning mesh Added support for exporting multiple top-level bones on armatures AscendViewer 1.0.4 Updated to use latest version of Ascend libraryCommunity TFS Build Extensions: July 2013: The July 2013 release contains VS2010 Activities(target .NET 4.0) VS2012 Activities (target .NET 4.5) VS2013 Activities (target .NET 4.5.1) Community TFS Build Manager VS2012 The Community TFS Build Manager can also be found in the Visual Studio Gallery here where updates will first become available. A version supporting VS2010 is also available in the Gallery here.smoketestgit1: new release: Wiki Markup Guide bold italics underline Heading 1 Heading 2 Bullet List Bullet List 2 Number List Number List 2 http://www.example.com Do not apply formattingsmoketesthg: new release: Wiki Markup Guide bold italics underline Heading 1 Heading 2 Bullet List Bullet List 2 Number List Number List 2 http://www.example.com Do not apply formattingsmoketesttfs: new release: Wiki Markup Guide bold italics underline Heading 1 Heading 2 Bullet List Bullet List 2 Number List Number List 2 http://www.example.com Do not apply formattingdatajs - JavaScript Library for data-centric web applications: datajs version 1.1.1: datajs is a cross-browser and UI agnostic JavaScript library that enables data-centric web applications with the following features: OData client that enables CRUD operations including batching and metadata support using both ATOM and JSON payloads. Single store abstraction that provides a common API on top of HTML5 local storage technologies. Data cache component that allows reading data ranges from a collection and storing them locally to reduce the number of network requests. Changes ...Orchard Project: Orchard 1.7 RC: Planning releasedTerminals: Version 3.1 - Release: Changes since version 3.0:15992 Unified usage of icons in user interface Added context menu in Organize favorites grid Fixed:34219 34210 34223 33981 34209 Install notes:No changes in database (use database from release 3.0) No upgrade of configuration, passwords, credentials or favorites See also upgrade notes for release 3.0Media Companion: Media Companion MC3.573b: XBMC Link - Let MC update your XBMC Library Fixes in place, Enjoy the XBMC Link function Well, Phil's been busy in the background, and come up with a Great new feature for Media Companion. Currently only implemented for movies. Once we're happy that's working with no issues, we'll extend the functionality to include TV shows. All the help for this is build into the application. Go to General Preferences - XBMC Link for details. Help us make it better* Currently only tested on local and ...Wsus Package Publisher: Release v1.2.1307.15: Fix a bug where WPP crash if 'ShowPendingUpdates' is start with wrong credentials. Fix a bug where WPP crash if ArrivalDateAfter and ArrivalDateBefore is equal in the ComputerView. Add a filter in the ComputerView. (Thanks to NorbertFe for this feature request) Add an option, when right-clicking on a computer, you can ask for display the current logon user of the remote computer. Add an option in settings to choose if WPP ping remote computers using IPv4, IPv6 or IPv6 and, if fail, IP...Lab Of Things: vBeta1: Initial release of LoTVidCoder: 1.4.23: New in 1.4.23 Added French translation. Fixed non-x264 video encoders not sticking in video tab. New in 1.4 Updated HandBrake core to 0.9.9 Blu-ray subtitle (PGS) support Additional framerates: 30, 50, 59.94, 60 Additional sample rates: 8, 11.025, 12 and 16 kHz Additional higher bitrates for audio Same as Source Constant Framerate 24-bit FLAC encoding Added Windows Phone 8 and Apple TV 3 presets Introduced process isolation for encodes. Now if HandBrake crashes, VidCoder will ...New Projects[C#]A Complete MySQL Manager Project: An open-source MySQL database manager oriented to multi-threading environments, supporting to create an entire database from scratch and edit it.bCal Javascript Calendar Generator: Using this simple javascript library, you can create simple navigable calendars in your website with just one line of user code.Better Network: Tools to delete network profile and network lists in Windows 8.C# Intellisense for Notepad++: 'CS-Script Intellisense' is a real C# intellisense solution based on CS-Script and ICSharpCode.NRefactory/Mono.Cecil.DARF: Dynamic Application Runtime Framework: A set of tools and libraries which help software developers create fully distributed and component-based applications. FeiXinV5: Just TestFollower Catcher: Game made for the 2012 Windows 8 Megathon. Second place in Madrid's local competition.MeeOS .NET: El primer sistema operativo GNU GPL en español.Music Vault: Music Vault is program to store your favorite music in one place, you can in any time move all your music library by moving only one file.MVC uTorrent: This is an ASP.NET MVC uTorrent front end, that utilises the uTorrent API. The main features: - Single page application - Can be hosted in IISMyTaskManager: This project Related to distribute the task to log in users OO2RDF: OO2RDF is a framework for data triplification. P(y)rotein Subcellular Location Image Database: A library that allows communication with an OMERO database, an open-source software for storage and manipulation of biological images.PE Toolbox: PE Toolbox ? ????? ?? ???????????, ????? ??????? ??? ??????????? ?? ?????. ???? ????? ??????????? ???????: - PE IFE (Importing from Excel) PeGscan: *PeGscan*ScriptZilla: ScriptZilla is an Free Editor for Windows with more Than 23 Languages.Sharepoint : Reconciliate SSRS Reports and Datasets with datasources Powershell: Powershell to link datasources to SSRS reports and datasetsSync-Moped: The idea behind the "Sync-Moped" is to synchronize two directories with backup functionality.System.Time: System.Time provides a type for .NET that allows the managing of a time in System.String, System.DateTime and System.TimeSpan form at the same time.Text Analytics: Project summary will be added later.Tibia Universal MC .NET: This tool was written as an attempt to port the [url:http://code.google.com/p/xenomc/] to the .NET Framework.VRFramework: VR Framework is a system for creating a virtual reality games using your PC, and Android smart phone, and Unity 3D.

    Read the article

  • 3-Tier Architecture in asp.net

    - by Aamir Hasan
    Three-tier (layer) is a client-server architecture in which the user interface, business process (business rules) and data storage and data access are developed and maintained as independent modules or most often on separate platforms. Basically, there are 3 layers, tier 1 (presentation tier, GUI tier), tier 2 (business objects, business logic tier) and tier 3 (data access tier). These tiers can be developed and tested separately. 3 - Tier Architecture is like following : 1. Presentation Layer 2.Data Manager Layer 3. Data Access Layer  The communication between all these layers need to be done using Business Entities. 1. Presentation Layer is the one where the UI comes into picture 2. Data Manager Layer is the one where all the maipulative code is written. Basically in this layer all the functional code needs to mentioned. 3. Data Access Layer is the one which communicates directly to the database. Data from one layer to other needs to be tranformed using Entities.

    Read the article

  • NEC uPD720200 USB 3.0 not working on Ubuntu 12.04

    - by Jagged
    I've recently installed Ubuntu 12.04 64-bit on a HP Envy 15 1104tx. Most stuff appears to be working fine with the exception of the two USB3 ports (USB2 port works fine). I've read a lot of articles but so far have not been able to find a solution. I've tried adding 'pci=nomsi' to '/etc/default/grub' but this made no difference. Some articles suggest booting into Windows and upgrading the firmware on the uPD720200. Any body had any experience of this? Is there a way I can checked the firmware version of the NEC uPD720200 in Linux to see if there is an update available? Any help appreciated. uname -a: Linux HP-ENVY-15-1104tx 3.2.0-26-generic #41-Ubuntu SMP Thu Jun 14 17:49:24 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux lshw: hp-envy-15-1104tx description: Notebook product: HP ENVY 15 Notebook PC (WF591PA#ABG) vendor: Hewlett-Packard version: 0492110000241910001420000 serial: CNF0301C79 width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall32 configuration: boot=normal chassis=notebook family=103C_5335KV sku=WF591PA#ABG uuid=434E4630-3330-3143-3739-60EB6906688F *-core description: Motherboard product: 1522 vendor: Hewlett-Packard physical id: 0 version: 36.35 serial: CNF0301C79 slot: Base Board Chassis Location *-firmware description: BIOS vendor: Hewlett-Packard physical id: 0 version: F.2B date: 10/12/2010 size: 1MiB capacity: 1472KiB capabilities: pci upgrade shadowing cdboot bootselect edd int13floppynec int13floppytoshiba int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int9keyboard int10video acpi usb biosbootspecification *-memory description: System Memory physical id: 13 slot: System board or motherboard size: 16GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 0 serial: E13C4316 slot: Bottom size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 1 serial: E03C3E16 slot: Bottom size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 2 serial: 672279CC slot: On Board size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:3 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 3 serial: 652286CC slot: On Board size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-cpu description: CPU product: Intel(R) Core(TM) i7 CPU Q 820 @ 1.73GHz vendor: Intel Corp. physical id: 1d bus info: cpu@0 version: Intel(R) Core(TM) i7 CPU Q 820 @ 1.73GHz slot: CPU size: 1199MHz capacity: 1199MHz width: 64 bits clock: 1066MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=4 enabledcores=4 threads=8 *-cache:0 description: L3 cache physical id: 1e slot: L3 Cache size: 8MiB capacity: 8MiB capabilities: synchronous internal write-through unified *-cache:1 description: L2 cache physical id: 20 slot: L2 Cache size: 256KiB capacity: 256KiB capabilities: synchronous internal write-through unified *-cache:2 description: L1 cache physical id: 21 slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through instruction *-cache description: L1 cache physical id: 1f slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through data *-pci:0 description: Host bridge product: Core Processor DMI vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 11 width: 32 bits clock: 33MHz *-pci:0 description: PCI bridge product: Core Processor PCI Express Root Port 1 vendor: Intel Corporation physical id: 3 bus info: pci@0000:00:03.0 version: 11 width: 32 bits clock: 33MHz capabilities: pci msi pciexpress pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 ioport:4000(size=4096) memory:d4100000-d41fffff ioport:c0000000(size=268435456) *-display description: VGA compatible controller product: Broadway PRO [Mobility Radeon HD 5800 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=fglrx_pci latency=0 resources: irq:58 memory:c0000000-cfffffff memory:d4100000-d411ffff ioport:4000(size=256) memory:d4140000-d415ffff *-multimedia description: Audio device product: Juniper HDMI Audio [Radeon HD 5700 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0.1 bus info: pci@0000:01:00.1 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:56 memory:d4120000-d4123fff *-pci:1 description: PCI bridge product: Core Processor PCI Express Root Port 3 vendor: Intel Corporation physical id: 5 bus info: pci@0000:00:05.0 version: 11 width: 32 bits clock: 33MHz capabilities: pci msi pciexpress pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 memory:d4000000-d40fffff *-usb description: USB controller product: uPD720200 USB 3.0 Host Controller vendor: NEC Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 03 width: 64 bits clock: 33MHz capabilities: pm msi msix pciexpress xhci bus_master cap_list configuration: driver=xhci_hcd latency=0 resources: irq:16 memory:d4000000-d4001fff *-generic:0 UNCLAIMED description: System peripheral product: Core Processor System Management Registers vendor: Intel Corporation physical id: 8 bus info: pci@0000:00:08.0 version: 11 width: 32 bits clock: 33MHz capabilities: pciexpress cap_list configuration: latency=0 *-generic:1 UNCLAIMED description: System peripheral product: Core Processor Semaphore and Scratchpad Registers vendor: Intel Corporation physical id: 8.1 bus info: pci@0000:00:08.1 version: 11 width: 32 bits clock: 33MHz capabilities: pciexpress cap_list configuration: latency=0 *-generic:2 UNCLAIMED description: System peripheral product: Core Processor System Control and Status Registers vendor: Intel Corporation physical id: 8.2 bus info: pci@0000:00:08.2 version: 11 width: 32 bits clock: 33MHz capabilities: pciexpress cap_list configuration: latency=0 *-generic:3 UNCLAIMED description: System peripheral product: Core Processor Miscellaneous Registers vendor: Intel Corporation physical id: 8.3 bus info: pci@0000:00:08.3 version: 11 width: 32 bits clock: 33MHz configuration: latency=0 *-generic:4 UNCLAIMED description: System peripheral product: Core Processor QPI Link vendor: Intel Corporation physical id: 10 bus info: pci@0000:00:10.0 version: 11 width: 32 bits clock: 33MHz configuration: latency=0 *-generic:5 UNCLAIMED description: System peripheral product: Core Processor QPI Routing and Protocol Registers vendor: Intel Corporation physical id: 10.1 bus info: pci@0000:00:10.1 version: 11 width: 32 bits clock: 33MHz configuration: latency=0 *-multimedia description: Audio device product: 5 Series/3400 Series Chipset High Definition Audio vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:55 memory:d4200000-d4203fff *-pci:2 description: PCI bridge product: 5 Series/3400 Series Chipset PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 05 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:17 ioport:3000(size=4096) memory:d3000000-d3ffffff ioport:d0000000(size=16777216) *-network description: Wireless interface product: Centrino Advanced-N 6200 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 35 serial: 00:27:10:40:e4:68 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-26-generic firmware=9.221.4.1 build 25532 latency=0 link=no multicast=yes wireless=IEEE 802.11abgn resources: irq:54 memory:d3000000-d3001fff *-pci:3 description: PCI bridge product: 5 Series/3400 Series Chipset PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: 05 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 ioport:2000(size=4096) memory:d2000000-d2ffffff ioport:d1000000(size=16777216) *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: c0 serial: 60:eb:69:06:68:8f size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=10.161.0.147 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s resources: irq:57 memory:d2000000-d203ffff ioport:2000(size=128) *-usb description: USB controller product: 5 Series/3400 Series Chipset USB2 Enhanced Host Controller vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:20 memory:d4205800-d4205bff *-pci:4 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: a5 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list *-isa description: ISA bridge product: Mobile 5 Series Chipset LPC Interface Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 05 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: RAID bus controller product: 82801 Mobile SATA Controller [RAID mode] vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 version: 05 width: 32 bits clock: 66MHz capabilities: storage msi pm bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:45 ioport:5048(size=8) ioport:5054(size=4) ioport:5040(size=8) ioport:5050(size=4) ioport:5020(size=32) memory:d4205000-d42057ff *-disk description: ATA Disk product: OCZ-VERTEX3 physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 2.15 serial: OCZ-0350P6H316X5KUQE size: 223GiB (240GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000592dd *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: / version: 1.0 serial: e741f18c-cfc5-4bce-b1e7-f80e517a3a22 size: 207GiB capacity: 207GiB capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2012-06-15 06:49:27 filesystem=ext4 lastmountpoint=/ modified=2012-06-14 21:23:42 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered mounted=2012-07-10 16:18:20 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 15GiB capacity: 15GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 15GiB capabilities: nofs *-serial UNCLAIMED description: SMBus product: 5 Series/3400 Series Chipset SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 05 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:d4205c00-d4205cff ioport:5000(size=32) *-pci:1 description: Host bridge product: Core Processor QuickPath Architecture Generic Non-Core Registers vendor: Intel Corporation physical id: 101 bus info: pci@0000:ff:00.0 version: 04 width: 32 bits clock: 33MHz *-pci:2 description: Host bridge product: Core Processor QuickPath Architecture System Address Decoder vendor: Intel Corporation physical id: 102 bus info: pci@0000:ff:00.1 version: 04 width: 32 bits clock: 33MHz *-pci:3 description: Host bridge product: Core Processor QPI Link 0 vendor: Intel Corporation physical id: 103 bus info: pci@0000:ff:02.0 version: 04 width: 32 bits clock: 33MHz *-pci:4 description: Host bridge product: Core Processor QPI Physical 0 vendor: Intel Corporation physical id: 104 bus info: pci@0000:ff:02.1 version: 04 width: 32 bits clock: 33MHz *-pci:5 description: Host bridge product: Core Processor Integrated Memory Controller vendor: Intel Corporation physical id: 105 bus info: pci@0000:ff:03.0 version: 04 width: 32 bits clock: 33MHz *-pci:6 description: Host bridge product: Core Processor Integrated Memory Controller Target Address Decoder vendor: Intel Corporation physical id: 106 bus info: pci@0000:ff:03.1 version: 04 width: 32 bits clock: 33MHz *-pci:7 description: Host bridge product: Core Processor Integrated Memory Controller Test Registers vendor: Intel Corporation physical id: 107 bus info: pci@0000:ff:03.4 version: 04 width: 32 bits clock: 33MHz *-pci:8 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Control Registers vendor: Intel Corporation physical id: 108 bus info: pci@0000:ff:04.0 version: 04 width: 32 bits clock: 33MHz *-pci:9 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Address Registers vendor: Intel Corporation physical id: 109 bus info: pci@0000:ff:04.1 version: 04 width: 32 bits clock: 33MHz *-pci:10 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Rank Registers vendor: Intel Corporation physical id: 10a bus info: pci@0000:ff:04.2 version: 04 width: 32 bits clock: 33MHz *-pci:11 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers vendor: Intel Corporation physical id: 10b bus info: pci@0000:ff:04.3 version: 04 width: 32 bits clock: 33MHz *-pci:12 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Control Registers vendor: Intel Corporation physical id: 10c bus info: pci@0000:ff:05.0 version: 04 width: 32 bits clock: 33MHz *-pci:13 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Address Registers vendor: Intel Corporation physical id: 10d bus info: pci@0000:ff:05.1 version: 04 width: 32 bits clock: 33MHz *-pci:14 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Rank Registers vendor: Intel Corporation physical id: 10e bus info: pci@0000:ff:05.2 version: 04 width: 32 bits clock: 33MHz *-pci:15 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers vendor: Intel Corporation physical id: 10f bus info: pci@0000:ff:05.3 version: 04 width: 32 bits clock: 33MHz *-battery description: Lithium Ion Battery product: NK06053 vendor: SMP-ATL24 physical id: 1 slot: Primary capacity: 4800mWh configuration: voltage=11.1V lspci: 02:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30 [XHCI]) Subsystem: Hewlett-Packard Company Device 1522 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at d4000000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable+ Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff Capabilities: [150] Latency Tolerance Reporting Kernel driver in use: xhci_hcd lsusb (with thumb drive plugged into USB3 port): Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 5986:01d0 Acer, Inc Bus 001 Device 004: ID 03f0:231d Hewlett-Packard

    Read the article

  • Recover Data Like a Forensics Expert Using an Ubuntu Live CD

    - by Trevor Bekolay
    There are lots of utilities to recover deleted files, but what if you can’t boot up your computer, or the whole drive has been formatted? We’ll show you some tools that will dig deep and recover the most elusive deleted files, or even whole hard drive partitions. We’ve shown you simple ways to recover accidentally deleted files, even a simple method that can be done from an Ubuntu Live CD, but for hard disks that have been heavily corrupted, those methods aren’t going to cut it. In this article, we’ll examine four tools that can recover data from the most messed up hard drives, regardless of whether they were formatted for a Windows, Linux, or Mac computer, or even if the partition table is wiped out entirely. Note: These tools cannot recover data that has been overwritten on a hard disk. Whether a deleted file has been overwritten depends on many factors – the quicker you realize that you want to recover a file, the more likely you will be able to do so. Our setup To show these tools, we’ve set up a small 1 GB hard drive, with half of the space partitioned as ext2, a file system used in Linux, and half the space partitioned as FAT32, a file system used in older Windows systems. We stored ten random pictures on each hard drive. We then wiped the partition table from the hard drive by deleting the partitions in GParted. Is our data lost forever? Installing the tools All of the tools we’re going to use are in Ubuntu’s universe repository. To enable the repository, open Synaptic Package Manager by clicking on System in the top-left, then Administration > Synaptic Package Manager. Click on Settings > Repositories and add a check in the box labelled “Community-maintained Open Source software (universe)”. Click Close, and then in the main Synaptic Package Manager window, click the Reload button. Once the package list has reloaded, and the search index rebuilt, search for and mark for installation one or all of the following packages: testdisk, foremost, and scalpel. Testdisk includes TestDisk, which can recover lost partitions and repair boot sectors, and PhotoRec, which can recover many different types of files from tons of different file systems. Foremost, originally developed by the US Air Force Office of Special Investigations, recovers files based on their headers and other internal structures. Foremost operates on hard drives or drive image files generated by various tools. Finally, scalpel performs the same functions as foremost, but is focused on enhanced performance and lower memory usage. Scalpel may run better if you have an older machine with less RAM. Recover hard drive partitions If you can’t mount your hard drive, then its partition table might be corrupted. Before you start trying to recover your important files, it may be possible to recover one or more partitions on your drive, recovering all of your files with one step. Testdisk is the tool for the job. Start it by opening a terminal (Applications > Accessories > Terminal) and typing in: sudo testdisk If you’d like, you can create a log file, though it won’t affect how much data you recover. Once you make your choice, you’re greeted with a list of the storage media on your machine. You should be able to identify the hard drive you want to recover partitions from by its size and label. TestDisk asks you select the type of partition table to search for. In most cases (ext2/3, NTFS, FAT32, etc.) you should select Intel and press Enter. Highlight Analyse and press enter. In our case, our small hard drive has previously been formatted as NTFS. Amazingly, TestDisk finds this partition, though it is unable to recover it. It also finds the two partitions we just deleted. We are able to change their attributes, or add more partitions, but we’ll just recover them by pressing Enter. If TestDisk hasn’t found all of your partitions, you can try doing a deeper search by selecting that option with the left and right arrow keys. We only had these two partitions, so we’ll recover them by selecting Write and pressing Enter. Testdisk informs us that we will have to reboot. Note: If your Ubuntu Live CD is not persistent, then when you reboot you will have to reinstall any tools that you installed earlier. After restarting, both of our partitions are back to their original states, pictures and all. Recover files of certain types For the following examples, we deleted the 10 pictures from both partitions and then reformatted them. PhotoRec Of the three tools we’ll show, PhotoRec is the most user-friendly, despite being a console-based utility. To start recovering files, open a terminal (Applications > Accessories > Terminal) and type in: sudo photorec To begin, you are asked to select a storage device to search. You should be able to identify the right device by its size and label. Select the right device, and then hit Enter. PhotoRec asks you select the type of partition to search. In most cases (ext2/3, NTFS, FAT, etc.) you should select Intel and press Enter. You are given a list of the partitions on your selected hard drive. If you want to recover all of the files on a partition, then select Search and hit enter. However, this process can be very slow, and in our case we only want to search for pictures files, so instead we use the right arrow key to select File Opt and press Enter. PhotoRec can recover many different types of files, and deselecting each one would take a long time. Instead, we press “s” to clear all of the selections, and then find the appropriate file types – jpg, gif, and png – and select them by pressing the right arrow key. Once we’ve selected these three, we press “b” to save these selections. Press enter to return to the list of hard drive partitions. We want to search both of our partitions, so we highlight “No partition” and “Search” and then press Enter. PhotoRec prompts for a location to store the recovered files. If you have a different healthy hard drive, then we recommend storing the recovered files there. Since we’re not recovering very much, we’ll store it on the Ubuntu Live CD’s desktop. Note: Do not recover files to the hard drive you’re recovering from. PhotoRec is able to recover the 20 pictures from the partitions on our hard drive! A quick look in the recup_dir.1 directory that it creates confirms that PhotoRec has recovered all of our pictures, save for the file names. Foremost Foremost is a command-line program with no interactive interface like PhotoRec, but offers a number of command-line options to get as much data out of your had drive as possible. For a full list of options that can be tweaked via the command line, open up a terminal (Applications > Accessories > Terminal) and type in: foremost –h In our case, the command line options that we are going to use are: -t, a comma-separated list of types of files to search for. In our case, this is “jpeg,png,gif”. -v, enabling verbose-mode, giving us more information about what foremost is doing. -o, the output folder to store recovered files in. In our case, we created a directory called “foremost” on the desktop. -i, the input that will be searched for files. This can be a disk image in several different formats; however, we will use a hard disk, /dev/sda. Our foremost invocation is: sudo foremost –t jpeg,png,gif –o foremost –v –i /dev/sda Your invocation will differ depending on what you’re searching for and where you’re searching for it. Foremost is able to recover 17 of the 20 files stored on the hard drive. Looking at the files, we can confirm that these files were recovered relatively well, though we can see some errors in the thumbnail for 00622449.jpg. Part of this may be due to the ext2 filesystem. Foremost recommends using the –d command-line option for Linux file systems like ext2. We’ll run foremost again, adding the –d command-line option to our foremost invocation: sudo foremost –t jpeg,png,gif –d –o foremost –v –i /dev/sda This time, foremost is able to recover all 20 images! A final look at the pictures reveals that the pictures were recovered with no problems. Scalpel Scalpel is another powerful program that, like Foremost, is heavily configurable. Unlike Foremost, Scalpel requires you to edit a configuration file before attempting any data recovery. Any text editor will do, but we’ll use gedit to change the configuration file. In a terminal window (Applications > Accessories > Terminal), type in: sudo gedit /etc/scalpel/scalpel.conf scalpel.conf contains information about a number of different file types. Scroll through this file and uncomment lines that start with a file type that you want to recover (i.e. remove the “#” character at the start of those lines). Save the file and close it. Return to the terminal window. Scalpel also has a ton of command-line options that can help you search quickly and effectively; however, we’ll just define the input device (/dev/sda) and the output folder (a folder called “scalpel” that we created on the desktop). Our invocation is: sudo scalpel /dev/sda –o scalpel Scalpel is able to recover 18 of our 20 files. A quick look at the files scalpel recovered reveals that most of our files were recovered successfully, though there were some problems (e.g. 00000012.jpg). Conclusion In our quick toy example, TestDisk was able to recover two deleted partitions, and PhotoRec and Foremost were able to recover all 20 deleted images. Scalpel recovered most of the files, but it’s very likely that playing with the command-line options for scalpel would have enabled us to recover all 20 images. These tools are lifesavers when something goes wrong with your hard drive. If your data is on the hard drive somewhere, then one of these tools will track it down! Similar Articles Productive Geek Tips Recover Deleted Files on an NTFS Hard Drive from a Ubuntu Live CDUse an Ubuntu Live CD to Securely Wipe Your PC’s Hard DriveReset Your Ubuntu Password Easily from the Live CDBackup Your Windows Live Writer SettingsAdding extra Repositories on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Awe inspiring, inter-galactic theme (Win 7) Case Study – How to Optimize Popular Wordpress Sites Restore Hidden Updates in Windows 7 & Vista Iceland an Insurance Job? Find Downloads and Add-ins for Outlook Recycle !

    Read the article

  • Keep Oracle VM 3 Up to Date

    - by Honglin Su
    More and more customers turn to Oracle VM 3 to virtualize their enterprise applications. Oracle VM support subscription is an integrated part of their successes. Customers enjoy the benefit of the industry-leading global support 24x7 for their server virtualization implementation, and receive access to patches, fixes, and updates via Unbreakable Linux Network (ULN). For customers running Oracle systems, Oracle VM support is included in Oracle Premium Support for Systems at no extra cost, and customers receive comprehensive systems coverage that includes single point accountability for Oracle server and storage hardware; integrated software (for example, firmware); and operating system software (Oracle Solaris, Oracle Linux, and Oracle VM). To run a successful virtualization infrastructure, it's important to keep Oracle VM 3 environment up to date by leveraging Oracle VM support resources.  Oracle VM Server Updates: You can easily upgrade Oracle VM Server using a Yum repository. You can download the latest server patch updates from ULN. To receive notification on the software update delivered to Oracle ULN for Oracle VM, you can sign up here. For information on setting up an Oracle VM Server Yum repository and using Oracle VM Manager to perform the upgrade of Oracle VM Servers, see Updating and Upgrading Oracle VM Servers in the Oracle VM User's Guide .  Oracle VM Manager Updates: Get the download instructions at OTN, and apply latest Oracle VM Manager patch. Be sure to review the patch README before you apply the patches. Support customers have access to extremely valuable knowledge notes from My Oracle Support. They are the first to receive useful tips to help address issues in Oracle VM deployments. For example, Upgrade to Oracle VM 3.1.1 using Yum Repository may cause network configuration scripts to be renamed causing network failure after reboot (Doc ID 1464126.1) Oracle VM server reboots after network becomes unresponsive due to deep C-State power management setting (Doc ID 1440197.1) For more information about Oracle's virtualization, visit oracle.com/virtualization.

    Read the article

  • ASP.NET MVC Framework

    - by Aamir Hasan
     MVC is a design pattern. A reusable "recipe" for constructing your application. Generally, you don't want your user interface code and data access code to be mixed together, it makes changing either one more difficult. By placing data access code into a "Model" object and user interface code into a "View" object, you can use a "Controller" object to act as a go-between, sending messages/calling methods on the view object when the data changes and vice versa. Model-view-controller (MVC) is an architectural pattern used in software engineering. In complex computer applications that present a large amount of data to the user, a developer often wishes to separate data (model) and user interface (view) concerns, so that changes to the user interface will not affect data handling, and that the data can be reorganized without changing the user interface. The model-view-controller solves this problem by decoupling data access and business logic from data presentation and user interaction, by introducing an intermediate component: the controller.Model:    The domain-specific representation of the information that the application operates. Domain logic adds meaning to raw data (e.g., calculating whether today is the user's birthday, or the totals, taxes, and shipping charges for shopping cart items).    Many applications use a persistent storage mechanism (such as a database) to store data. MVC does not specifically mention the data access layer because it is understood to be underneath or encapsulated by the Model.View:    Renders the model into a form suitable for interaction, typically a user interface element. Multiple views can exist for a single model for different purposes.Controller:    Processes and responds to events, typically user actions, and may invoke changes on the model.    

    Read the article

  • Oracle Database 12 c Training and Certification: What’s in it for Me?

    - by KJones
    Oracle Database 12c has officially launched! Through Oracle University, our expert instructors can introduce you to the features and functions of this new Oracle Database 12c product. Through training courses and certification exam prep seminars, you can build up your database knowledge and apply this knowledge to advance your career. Already an Oracle Database Expert? Why Oracle Database 12c Training is still a Good Idea Oracle is the industry leader for database technology and takes the release of new products very seriously. We continue to listen to customer needs and add features and functionality to address those needs. Oracle Database 12c is no exception. The following areas have been greatly enhanced and should be considered for your additional training or certification: • Database for Cloud Computing • Compression and Information Lifecycle Management (ILM) • Improved Performance & Scalability • Extreme Availability • Security Defense in Depth • Manageability Oracle Certified Database Administrators Reap Career Rewards Becoming an expert user of database technology through Oracle University's certification program widens your skill set to demonstrate your expertise implementing the most advanced database technology available. By doing so, you'll make yourself a more marketable employee and candidate in the job market.  Reasons to Become an Oracle Certified Database Administrator of Oracle Database 12c: • The new Oracle Database 12c certifications emphasize more advanced skills that align with industry standards, resulting in an even more valuable credential for customers and partners. • The Oracle Certified Associate (OCA) for Oracle Database 12c centers upon certification objectives that measure IT professionals' day-to-day skills, along with your ability to manage challenges. • Building upon all of the competencies incorporated into Oracle's Database 12c OCA certification, the Oracle Certified Professional (OCP) for Oracle Database 12c certification includes advanced knowledge and skills required of top-performing database administrators. • The Oracle Certified Master (OCM) for Oracle Database 12c - a very challenging and elite top-level certification - certifies the most highly skilled and experienced database experts. • Oracle offers 12c upgrade paths for existing Oracle Certified Professionals (OCP) and Oracle Certified Masters (OCM). Database 12c Training and Certification: Built with Your Input When creating Oracle Database 12c training courses and certifications, we wanted to know which tasks are most important in a DBA's day-to-day work. Instead of assuming what those tasks might be, we decided to develop a job task analysis survey for DBAs. The response rate from DBAs from around the world was overwhelming! The survey focused on the following key database areas: • DBA Core Essentials • Database Storage • High Availability • Scalability • Networking • Security • Very Large Database Administration • Distributed Databases After conducting this survey, we took this specific feedback and used it to help mold the new Oracle Database 12c training and certification curriculum. The benefit to you? You now have access to Oracle Database 12c courses and certification exams that were created with your specific on-the-job tasks in mind. Explore Oracle Database 12c Training & Certification Today Investing in Oracle Database 12c training courses and certifications will help you develop a great deal of knowledge, experience and expertise. Explore our portfolio of offerings to determine which skills you need as a DBA to get up-to-speed on Oracle Database 12c technology. Questions or comments about the new Oracle Database 12c offerings? Let us know in the comments below. - Diana Gray, Principle Curriculum Product Manager and Raza Siddiqui, Senior Principle Curriculum Product Manager

    Read the article

  • CodePlex Daily Summary for Monday, December 20, 2010

    CodePlex Daily Summary for Monday, December 20, 2010Popular ReleasesLINQ to Twitter: LINQ to Twitter Beta v2.0.18: Silverlight, OAuth, 100% Twitter API coverage, streaming, extensibility via Raw Queries, and added documentation. Bug fixes.ASP.NET MVC Project Awesome (jQuery Ajax helpers): 1.4.3: Helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager new stuff: Improvements for confirm, popup, popup form RenderView controller extension the user experience for crud in live demo has been substantially improved + added search all the features are shown in the live demoSQL Monitor: SQL Monitor 3.0 alpha 6: 1. add alert target with regexp support 2. fix actitivites not getting current server 3. allow to change connection in query 4. fix problem with open data tableGanttPlanner: GanttPlanner V1.0: GanttPlanner V1.0 include GanttPlanner.dll and also a Demo application.EnhSim: EnhSim 2.2.5 ALPHA: 2.2.5 ALPHAThis release supports WoW patch 4.03a at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Added in the new...HD-Trailers.NET Downloader: HD-Trailers.NET Downloader v1.2: A Couple of small changes required to add support for XBMC which requires -trailer be appended to trailer filenames 2. Changed Version Number to 1.2. Leaving it a beta just in case. 3. added assembly.directives.dll (needed that to successfully compile the application. Not sure if it has to be in the distribution package. 4. Leaving Version 1.1N2 CMS: 2.1 release candidate 3: * Web platform installer support available N2 is a lightweight CMS framework for ASP.NET. It helps you build great web sites that anyone can update. Major Changes Support for auto-implemented properties ({get;set;}, based on contribution by And Poulsen) A bunch of bugs were fixed File manager improvements (multiple file upload, resize images to fit) New image gallery Infinite scroll paging on news Content templates First time with N2? Try the demo site Download one of the templ...TweetSharp: TweetSharp v2.0.0.0 - Preview 6: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Note: This code is currently preview quality. Preview 6 ChangesMaintenance release with user reported fixes Preview 5 ChangesMaintenance release with user reported fixes Preview 4 ChangesReintroduced fluent interface support via satellite assembly Added entities support, entity segmentation, and ITweetable/ITweeter interfaces for client development Numer...Team Foundation Server Administration Tool: 2.1: TFS Administration Tool 2.1, is the first version of the TFS Administration Tool which is built on top of the Team Foundation Server 2010 object model. TFS Administration Tool 2.1 can be installed on machines that are running either Team Explorer 2010, or Team Foundation Server 2010.Hacker Passwords: HackerPasswords.zip: Source code, executable and documentationSubtitleTools: SubtitleTools 1.3: - Added .srt FileAssociation & Win7 ShowRecentCategory feature. - Applied UnifiedYeKe to fix Persian search problems. - Reduced file size of Persian subtitles for uploading @OSDB.Facebook C# SDK: 4.1.0: - Lots of bug fixes - Removed Dynamic Runtime Language dependencies from non-dynamic platforms. - Samples included in release for ASP.NET, MVC, Silverlight, Windows Phone 7, WPF, WinForms, and one Visual Basic Sample - Changed internal serialization to use Json.net - BREAKING CHANGE: Canvas Session is no longer support. Use Signed Request instead. Canvas Session has been deprecated by Facebook. - BREAKING CHANGE: Some renames and changes with Authorizer, CanvasAuthorizer, and Authorization ac...NuGet (formerly NuPack): NuGet 1.0 build 11217.102: Note: this release is slightly newer than RC1, and fixes a couple issues relating to updating packages to newer versions. NuGet is a free, open source developer focused package management system for the .NET platform intent on simplifying the process of incorporating third party libraries into a .NET application during development. This release is a Visual Studio 2010 extension and contains the the Package Manager Console and the Add Package Dialog. This new build targets the newer feed (h...WCF Community Site: WCF Web APIs 10.12.17: Welcome to the second release of WCF Web APIs on codeplex Here is what is new in this release. WCF Support for jQuery - create WCF web services that are easy to consume from JavaScript clients, in particular jQuery. Better support for using JsonValue as dynamic Support for JsonValue change notification events for databinding and other purposes Support for going between JsonValue and CLR types WCF HTTP - create HTTP / REST based web services. This is a minor release which contains fixe...LiveChat Starter Kit: LCSK v1.0: This is a working version of the LCSK for Visual Studio 2010, ASP.NET MVC 3 (using Razor View Engine). this is still provider based (with 1 provider Sql) and this is still using WebService and Windows Forms operator console. The solution is cleaner, with an installer to create tables etc. You can also install it via nuget (Install-Package lcsk) Let me know your feedbackOrchard Project: Orchard 0.9: Orchard Release Notes Build: 0.9.253 Published: 12/16/2010 How to Install OrchardTo install the Orchard tech preview using Web PI, follow these instructions: http://www.orchardproject.net/docs/Installing-Orchard-Using-Web-PI.ashx Web PI will detect your hardware environment and install the application. --OR-- Alternatively, to install the release manually, download the Orchard.Web.0.9.253.zip file. The zip contents are pre-built and ready-to-run. Simply extract the contents of the Orch...DotNetNuke® Community Edition: 05.06.01 Beta: This is the initial Beta of DotNetNuke 5.6.1. See the DotNetNuke Roadmap a full list of changes in this release.MSBuild Extension Pack: December 2010: Release Blog Post The MSBuild Extension Pack December 2010 release provides a collection of over 380 MSBuild tasks. A high level summary of what the tasks currently cover includes the following: System Items: Active Directory, Certificates, COM+, Console, Date and Time, Drives, Environment Variables, Event Logs, Files and Folders, FTP, GAC, Network, Performance Counters, Registry, Services, Sound Code: Assemblies, AsyncExec, CAB Files, Code Signing, DynamicExecute, File Detokenisation, GU...mojoPortal: 2.3.5.8: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2358-released.aspx Note that we have separate deployment packages for .NET 3.5 and .NET 4.0 The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code. To download the source code see the Source Code Tab I recommend getting the latest source code using TortoiseHG, you can get the source code corresponding to this release here.Microsoft All-In-One Code Framework: Visual Studio 2010 Code Samples 2010-12-13: Code samples for Visual Studio 2010New Projects.NET Micro Framework Binary Parsing and Processing Extensions: Prototype library and test cases for parsing binary data in the .NET Micro Framework. The goal is to improve processing speed, reduce GC work and simplify code.CarolLib Framework: A common library by Lance Zhang and Carol Xiong Include Helpers, Extensions, Configurations and Windows Service...Copy Document URL to Clipboard: This is a SharePoint 2010 Feature that adds a button in the Ribbon, allowing users to copy document urls (links) to clipboard.exTWEET download: <exTWEET> Download link for application to be downloaded & used from here unless it becomes publicly available. Then, this link will be removed. HandleSpy: Get Object information by its Handle.ibuy: helloLoA: PL: Podstawa gry bez tekstur, modeli, map i skryptów. EN: ---MP3Tunes Locker Windows Phone API: A simple REST client for connecting to your mp3tunes.com locker on your windows mobile phone. You can browse by artist and album and shuffle your songs.Netduino Library: Various useful classes to help develop for netduino.NReports: NReports is a reporting library using RDL file format, aiming at interoperatibility with SQL Reporting Services. It has began as a fork of the latest version 4.1 of fyiReporting (now defunct). Supported platforms are .NET 3.5 (Windows) and Mono 2.6 (Linux).qlink Framework: Qlink FrameWork development application that auto-generates a data layer object model based on your database schema and ...Rapid Image Editor: This is image editor which allows to edit images very rapidly and comfortably. Therefore it's named as Rapid.Serial-test with SHLCN: ?????????????????????????SharePoint Selbstbedienung: This is a project for all Microsoft SharePoint users. Whether you are a developer, administrator or end user, I want to provide you, complete NO-Deployment-solutions to create nice application for SharePoint 2010 or Office 365 plattform easily. TestRepo: test projectUmbraco Live At Education Calendar: Umbraco Live At Education CalendarUSS: Urban Statistical SystemVLBA Web Services: This is our seminar project to demonstrate the implementation and use of web services.Windows Phone 7 Isolated Storage Explorer: Isolated Storage Explorer for Windows Phone 7 emulator or device.Windows Phone 7 Logging Framework: Logging Framework for Windows Phone 7

    Read the article

  • SQL Contest – Win 10 Amazon Gift Cards worth (USD 200) and 10 NuoDB T-Shirts

    - by Pinal Dave
    This month, we have yet not run any contest so we will be running a very interesting contest with the help of good guys at NuoDB. NuoDB has just released version 2.0 and You can download NuoDB from here. NuoDB’s NewSQL distributed database is designed to be a single database that works across multiple servers, which can scale easily, and scale on demand. That’s one system that gives high connectivity but no latency, complexity or maintenance issues. MySQL works in some circumstances, but a period of growth isn’t one of them. So as a company moves forward, the MySQL database can’t keep pace. Data storage and data replication errors creep in. Soon the diaspora of the offices becomes a problem. Your telephone system isn’t just distributed, it is literally all over the place. You can read my detailed article about how Why VoIP Service Providers Should Think About NuoDB’s Geo Distribution. Here is the contest: Contest Part 1: NuoDB R2.0 delivered a long list of improvements and new features. List three of the major features of NuoDB 2.0. Here is the hint1, hint2, hint3. Contest Part 2: Download NuoDB using this link. Once you download NuoDB, leave a comment over here with the name of the platform and installer size. (For example Windows Platform Size abc.dd MB) Here is the what you can win! Giveaways 10 Amazon Gift Card (Each of USD 20 – total USD 200) 10 Amazingly looking NuoDB T-Shirts (For the first 10 downloads) Rules Participate before Oct 28, 2013. All the valid answers will be published after Oct 28, 2013 and winners will receive an email on Nov 1st, 2013. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: NuoDB

    Read the article

  • How to use caching to increase render performance?

    - by Christian Ivicevic
    First of all I am going to cover the basic design of my 2d tile-based engine written with SDL in C++, then I will point out what I am up to and where I need some hints. Concept of my engine My engine uses the concept of GameScreens which are stored on a stack in the main game class. The main methods of a screen are usually LoadContent, Render, Update and InitMultithreading. (I use the last one because I am using v8 as a JavaScript bridge to the engine. The main game loop then renders the top screen on the stack (if there is one; otherwise, it exits the game) - actually it calls the render methods, but stores all items to be rendered in a list. After gathering all this information the methods like SDL_BlitSurface are called by my GameUIRenderer which draws the enqueued content and then draws some overlay. The code looks like this: while(Game is running) { Handle input if(Screens on stack == 0) exit Update timer etc. Clear the screen Peek the screen on the stack and collect information on what to render Actually render the enqueue screen stuff and some overlay etc. Flip the screen } The GameUIRenderer uses as hinted a std::vector<std::shared_ptr<ImageToRender>> to hold all necessary information described by this class: class ImageToRender { private: SDL_Surface* image; int x, y, w, h, xOffset, yOffset; }; This bunch of attributes is usually needed if I have a texture atlas with all tiles in one SDL_Surface and then the engine should crop one specific area and draw this to the screen. The GameUIRenderer::Render() method then just iterates over all elements and renders them something like this: std::for_each( this->m_vImageVector.begin(), this->m_vImageVector.end(), [this](std::shared_ptr<ImageToRender> pCurrentImage) { SDL_Rect rc = { pCurrentImage->x, pCurrentImage->y, 0, 0 }; // For the sake of simplicity ignore offsets... SDL_Rect srcRect = { 0, 0, pCurrentImage->w, pCurrentImage->h }; SDL_BlitSurface(pCurrentImage->pImage, &srcRect, g_pFramework->GetScreen(), &rc); } ); this->m_vImageVector.clear(); Current ideas which need to be reviewed The specified approach works really good and IMHO it is really has a good structure, however the performance could be definitely increased. I would like to know what do you suggest, how to implement efficient caching of surfaces etc so that there is no need to redraw the same scene over and over again? The map itself would be almost static, only when the player moves, we would need to move the map. Furthermore animated entities would either require updates of the whole map or updates of only the specific areas the entities are currently moving in. My first approaches were to include a flag IsTainted which should be used by the GameUIRenderer to decide whether to redraw everything or use cached version (or to not render anything so that we do not have to Clear the screen and let the last frame persist). However this seems to be quite messy if I have to manually handle in my Render method of the screen class if something has changed or not.

    Read the article

  • Drupal Modules for SEO & Content

    - by Aditi
    When we talk about Drupal SEO, there are two things to consider one is about the relevant SEO practices and about appropriate Drupal Modules available. Optimizing your website for search engines is one of the most important aspect of launching & promoting your website especially if ranking matters to you. Understanding SEO For starters, you have begin with Keyword research and then optimize your content according to your findings by tagging, meta tags etc, Drupal modules once installed help you manage a lot of such parameters. Identifying the target keywords Using the Page Title and Token modules PathAuto configuration <H1> heading tags Optimizing Drupal’s default robots.txt file Etc. While Drupal gives you a lot of ability to make your website content worthy & search engine friendly it is important for you to make sure you are not crossing the line or you could get penalized. Modules Overview Drupal Power is at its best when you have these modules & great brain working together. The basic SEO improvements can be achieved easily with the modules enlisted below, but you can win magical rankings if you use them logically & wisely. Understanding your keyword competition & enhancing your content is the basic key to success and ofcourse the modules: Pathauto Automatically create search enging friendly readable URLS from tokens. A token is a piece of data from content, say the author’s username, or the content’s title. For example mysite.com/an-article, rather than mysite.com/node/114 for every node you make. NodeWords Amazingly useful drupal module that allows you to create custom meta tags and descriptions for your nodes, which gives you the ability to target specific keywords and phrases. Page Title Enables you to set an alternative title for the <title></title> tags and for the <h1></h1> tags on a node. Global Redirect Manage content duplication, 301 redirects, and URL validation with this small, but powerful module. Taxonomy manager Make large additions, or changes to taxonomy very easy. This module provides a powerful interface for managing taxonomies. A vocabulary gets displayed in a dynamic tree view, where parent terms can be expanded to list their nested child terms or can be collapsed. robotstxt A robots.txt file is vital for ensuring that search engine spiders don’t index the unwanted areas of your site. This Drupal module gives you the ability to manage your robots.txt file through the CMS admin. xmlsitemap An XML Sitemap lets the search engines index your website content. This module helps in generating and maintaining a complete sitemap for your website and gives you control over exactly which parts of the site you want to be included in the index. It even gives you the ability to automatically submit your sitemap to Google, Yahoo!, Ask.com and Windows Live every time you update a node or at specific interval. Node Import This module allows you to import a set of nodes from a Comma Seperated Values (CSV) or Tab Seperated Values (TSV) text file. Makes it easy to import hundreds-thousands of csv rows and you get to tie up these rows to CCK fields (or locations), and it can file it under the right taxonomy hierarchy. This is Super life saver module.

    Read the article

  • What’s the use of code reuse?

    - by Tony Davis
    All great developers write reusable code, don’t they? Well, maybe, but as with all statements regarding what “great” developers do or don’t do, it’s probably an over-simplification. A novice programmer, in particular, will encounter in the literature a general assumption of the importance of code reusability. They spend time worrying about DRY (don’t repeat yourself), moving logic into specific “helper” modules that they can then reuse, agonizing about the minutiae of the class structure, inheritance and interface design that will promote easy reuse. Unfortunately, writing code specifically for reuse often leads to complicated object hierarchies and inheritance models that are anything but reusable. If, instead, one strives to write simple code units that are highly maintainable and perform a single function, in a concise, isolated fashion then the potential for reuse simply “drops out” as a natural by-product. Programmers, of course, care about these principles, about encapsulation and clean interfaces that don’t expose inner workings and allow easy pluggability. This is great when it helps with the maintenance and development of code but how often, in practice, do we actually reuse our code? Most DBAs and database developers are familiar with the practical reasons for the limited opportunities to reuse database code and its potential downsides. However, surely elsewhere in our code base, reuse happens often. After all, we can all name examples, such as date/time handling modules, which if we write with enough care we can plug in to many places. I spoke to a developer just yesterday who looked me in the eye and told me that in 30+ years as a developer (a successful one, I’d add), he’d never once reused his own code. As I sat blinking in disbelief, he explained that, of course, he always thought he would reuse it. He’d often agonized over its design, certain that he was creating code of great significance that he and other generations would reuse, with grateful tears misting their eyes. In fact, it never happened. He had in his head, most of the algorithms he needed and would simply write the code from scratch each time, refining the algorithms and tailoring the code to meet the specific requirements. It was, he said, simply quicker to do that than dig out the old code, check it, correct the mistakes, and adapt it. Is this a common experience, or just a strange anomaly? Viewed in a certain light, building code with a focus on reusability seems to hark to a past age where people built cars and music systems with the idea that someone else could and would replace and reuse the parts. Technology advances so rapidly that the next time you need the “same” code, it’s likely a new technique, or a whole new language, has emerged in the meantime, better equipped to tackle the task. Maybe we should be less fearful of the idea that we could write code well suited to the system requirements, but with little regard for reuse potential, and then rewrite a better version from scratch the next time.

    Read the article

  • CodePlex Daily Summary for Tuesday, May 04, 2010

    CodePlex Daily Summary for Tuesday, May 04, 2010New ProjectsAlbum photo de club - Club's Photos Album: Un album photos permettant d'afficher les photos et le détails des membres d'un club - Photo album allowing to view photos and details of the membersBlog.Net Blogging Components: Blog.Net server-side blogging components to add a blog to your current ASP.NET website.FilePirate - Really Advanced LAN File Sharing: Really Advanced, yet super easy, LAN Party File Sharing written using the .Net Framework and C#. Ditch DirectConnect or Windows File Sharing at y...Fisiogest: Programa de gestión de una clínica de fisioterapiaIdeaNMR: An online repository of NMR experiment automated setups with wiki type documentation library and client program providing automated experiment setu...Introducción a Unity: Código de ejemplo del uso de Unity en diferentes situaciones. - Registro de clases, instancias e interfaces. - Resolución de clases, instancias e...Iowa City .NET Developers: This is the project site for the Iowa City .NET Developers.isanywhere: A command line utility to see if one or more files (given a filemask) are to be found anywhere inside a specific directory, or elsewhere inside one...LczCode: lczLog4net udp logs viewer: UdpLogViewer is a .NET 4 WinForm application that receives udp messages from log4net and shows them in a grid. It is possible to filter them or sh...New Silverlight XPS Viewer (In Sl4): New Silverlight XPS viewer Novuz: Novuz is a usenet indexer and reporter. It's developed both in Visual Studio 2010 and MonoDevelop, one of the key features of Novuz is that it sho...PodSnatch: PodSnatch is a podcast client that makes it easy to download rss-enclosures. Multiple simultaneous downloads enabled by threading. GUI is built wi...Robot Shootans: A simple top down shooter game where the player has to kill robots running at them. Written in C++ using SDL with various extentionsSharePoint Rsync List: This program will syncronize files and directories from and unc/local/sharepoint to a SharePoint 2007 or 2010 server. Supports of to 2GB files and ...SignInAndStorageLib: SignInAndStorageLib makes properly handling both sign in and storage issues in Xbox 360 XBLIG XNA games simple. Written in C#, SignInAndStorageLib...SilverBBS: ANSI-style bbs experience delivered via Silverlight. Silverlight flip-down counter: A Silverlight widget that enables you to count down towards a preconfigured event on a configured date.SmartieFly: Smartie Fly is a quiz software program written in C# using Silverlight. It uses SQL Server as a backend database. VS2010 Framework Driven Testing: CodedUITests generate a lot of code, and they break on every change to the object under test. Goals: - write new tests manually, but with as litt...WMediaCatalog: Advanced multimedia cataloguer. Allows users to keep their musical collections well organized and provides flexible methods of filtering, serarching WPathFinder: A simple path management application for windows. Functionality includes: - Add/remove/change path entries easily. - Search for all instances of a...Yasminoku: Yasminoku is an open source "Sudoku" alike game totally written in DHTML (JavaScript, CSS and HTML) that uses mouse. Includes sudoku solver. This c...New ReleasesAlbum photo de club - Club's Photos Album: App - version 0.4: version 0.4 - Critère d'affichage des membres : nom, année, ville - Navigation entre les images d'un membres - Navigation entre les membres - Affi...Album photo de club - Club's Photos Album: Code - Version 0.4: Code source de la version 0.4BigDecimal: Concept Evaluation Release 2 (BigDecimals): This in the second updates release of BigDecimals. It has the four simple arithmetic rules Addition, Subtract, Multiple and Division.CBM-Command: 2010-05-03: New features in this build Keyboard Shortcuts Panel Swapping Panel Toggling On/Off Toggling 40/80 Columns Confirming Quit Confirming GO64...Directory Linker: Directory Linker 2: This release introduces Undo Support and Symbolic File Link support. More details can be found here http://www.humblecoder.co.uk/?p=141DotNetNuke Skins Pack: DotNetNuke 80 Skins Pack: This released is the first for DNN 4 & 5 with Skin Token Design (legacy skin support on DNN 4 & 5)DTLoggedExec: 1.0.0.0: -FIRST NON-BETA RELEASE! :) -Code cleaned up -Added SetPackageInfo method to ILogProvider interface to make easier future improvements -Deprecated...GenerateTypedBamApi: Version 2.1: Changes in this release: NEW: Support for Office Data Connectivity Components 2010 NEW: Include both x86 and x64 EXE's due to lack of support in ...HobbyBrew Mobile: Beta 1 Refresh: Risolto bug circa il salvataggio di ricette (veniva impostato scorrettamente che si trattava di Mash Design "infusione" se ri-aperte con hobbyBrew)...Home Access Plus+: v4.2: Version 4.2 Added Overrides into the Booking System Some slight CSS changes to the Help Desk Updated the config tool to work anywhere on the LA...Hubble.Net - Open source full-text search database: V0.8.3.0: V0.8.3.0 Show server version in about dialog. Fix a bug of deleting querycache files. V0.8.2.9 Change sql client to support userid and password Ch...IdeaNMR: IdeaNMR Client: This is a client program with an example package.kdar: KDAR 0.0.21: KDAR - Kernel Debugger Anti Rootkit - signature's bases updated - usability increased - NDIS6 MINIPORT_BLOCK checks addedLightWeight Application Server: 0.4.1: One step further to beta - yet another release for c# developers audience only. Changes: 1. API - added a LWAS.Infrastructure.Storage service to d...Log4net udp logs viewer: UdpLogViewer 1.0: First release of UdpLogViewer, version 1.0.MDownloader: MDownloader-0.15.11.58370: Fixed minor bugs.Metabolite Enterprise Libraries for EPiServer CMS using Page Type Builder: Metabolite Enterprise Libraries 1.2 Beta 2: This is the beta release of the Metabolite Enterprise Libraries 1.2 Beta 2 for use with EPiServer 6 and Page Type Builder 1.2 Beta 2.Microsoft Silverlight Analytics Framework: Version 1.4.3 Installer: Pre-release Installer for Visual Studio 2010 and Expression Blend 4 RCSupports both Silverlight 3 and Silverlight 4 Release NotesFixed null referen...MultipointTUIO: Multipoint SDK v1.5 Release: Rebuilt against v1.5 of the Microsoft Multipoint SDK, this mean Windows 7 support (and 64bit I think!)My Notepad: My Notepad: This is the status of My Notepad until now. This is many built in features but has to undergo a lot of modifications. The release does not include ...New Silverlight XPS Viewer (In Sl4): Silverlight XPS Viewer: Background: During my development last week I was working on a Silverlight based XPS viewer. During this viewer we came to a situation in which the...NSIS Autorun: NSIS Autorun 0.1.6: This release includes source code, executable binary, files and example materials.Open Diagram: Open Diagram 5.0 Beta May 2010: This is the first beta release of Open Diagram 5.0. Select Crainiate.Diagramming.Examples.Forms as the startup project to view the current Class D...Pocket Wiki: PC Wiki (zip) 1.0.1: PC Version of Pocket Wiki. Unzip and run. Requires .NET Framework 2.0Pocket Wiki: Pocket Wiki 1.0.1 (cab): Pocket Wiki cab installation - requires DotNet 2.0 or greater. Default wiki language is "slash" - a syntax I created that is easy to type on keyboa...Pocket Wiki: Pocket Wiki.sbp: Pocket Wiki Source Code (version .72) - Basic4PPCPublish to Photo Frame: 1.0.2.0: This version adds: add borders to portrait images, for photo frames that crop them incorrectly.Reflection Studio: Reflection Studio 0.1: First download release, it contains a lot of things but allways in beta version. Hope you will like the preview.SharePoint 2010 PowerShell Scripts & Utilities: PSSP2010 Utils 0.1: This is the initial release with SPInstallUtils.psm1 module. This module includes Get-SPPrerequisites and New-SPInstallPackage cmdlets. Refer to th...Silverlight 4.0 Popup Menu: Context Menu for Silverlight 4.0 v1.1 Beta: Multilevel menus are now supported. Added design time support for the PopupMenuItem elements. The project is now under Subversion.Silverlight flip-down counter: FlipDownCounter v1.0: The final release of the Silverlight flip-down counter. Please refer to the included readme file for information on how to use the counter.Stratosphere: Stratosphere 1.0.0.1: Moved scalable block file system implementation to Stratosphere.FileSystemSystem.AddIn Pipeline Builder: Pipeline Builder 1.2: Lots of improvements from the CTP, version 1.0: - Added dialogue for possible overwrite if the file has changed: possibility of ignoring changes (p...ThoughtWorks Cruise Notification Interceptor: 1.0.1: Fixed an issue with the regex that parses the incoming notification. This issue would send failure messages when the build was "fixed".ThreadSafeControls: ThreadSafeControls v0.1: This is the first binary release of the ThreadSafeControls library. I'll call it a pre-alpha release.TracerX Logger/Viewer for .NET: 4.0: View this CodeProject article for documentation on how to use the latest version of the Logger. About the DownloadsVersion: 4.0.1005.1163 Changese...VCC: Latest build, v2.1.30503.0: Automatic drop of latest buildVisual Studio DSite: Lottery Game (Visual C++ 2008): An advanced lottery game made in visual c 2008.VivoSocial: VivoSocial 7.1.3: Version 7.1.3 of VivoSocial has been released. If you experienced any issues with the previous version, please update your modules to the 7.1.3 rel...Xrns2XMod: Xrns2XMod 1.0: Features added Conversion of all possible convertible features between Renoise and MOD / XM. FlacBox lib updated (thanks to Yuri) NAudio lib in...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: Databasepatterns & practices – Enterprise LibrarySilverlight ToolkitiTuner - The iTunes CompanionWindows Presentation Foundation (WPF)ASP.NETDotNetNuke® Community EditionMost Active ProjectsIonics Isapi Rewrite Filterpatterns & practices – Enterprise LibraryRawrHydroServer - CUAHSI Hydrologic Information System ServerAJAX Control Frameworkpatterns & practices: Azure Security GuidanceNB_Store - Free DotNetNuke Ecommerce Catalog ModuleBlogEngine.NETTinyProjectDambach Linear Algebra Framework

    Read the article

  • How can I transfer files to a Kindle Fire with a Micro-USB cable?

    - by Jeff
    I'm running Ubuntu 11.10, and when I connect my Kindle Fire to my computer via micro usb, it is not recognized automatically. Other usb devices, such as my ipod and digital camera, are recognized just fine. It does not appear to be a usb power issue, since the Kindle Fire wakes up from sleeping when it is plugged in. I never get the message on the Kindle telling me it is ready to accept files from the computer, though. Here are the last 15 lines of dmesg after plugging the kindle in: jeff@prime:~$ dmesg | tail -n 15 [45918.269671] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) [45929.072149] wlan0: no IPv6 routers present [46743.224217] usb 1-1: new high speed USB device number 5 using ehci_hcd [46743.364623] scsi8 : usb-storage 1-1:1.0 [46744.366102] scsi 8:0:0:0: Direct-Access Amazon Kindle 0001 PQ: 0 ANSI: 2 [46744.366356] scsi: killing requests for dead queue [46744.372494] scsi: killing requests for dead queue [46744.384510] scsi: killing requests for dead queue [46744.392348] scsi: killing requests for dead queue [46744.392731] scsi: killing requests for dead queue [46744.396853] scsi: killing requests for dead queue [46744.397214] scsi: killing requests for dead queue [46744.400795] scsi: killing requests for dead queue [46744.401589] sd 8:0:0:0: Attached scsi generic sg2 type 0 [46744.407520] sd 8:0:0:0: [sdb] Attached SCSI removable disk And here are my mounted filesystems: jeff@prime:~$ df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 298594984 174663712 108763480 62% / udev 1407684 4 1407680 1% /dev tmpfs 566924 896 566028 1% /run none 5120 0 5120 0% /run/lock none 1417308 300 1417008 1% /run/shm /home/jeff/.Private 298594984 174663712 108763480 62% /home/jeff I should note that, since I got Dropbox working on my Kindle, the usb is no longer strictly necessary, but as a matter of principle I'd love to get it working.

    Read the article

< Previous Page | 499 500 501 502 503 504 505 506 507 508 509 510  | Next Page >