Search Results

Search found 14253 results on 571 pages for 'css parsing'.

Page 505/571 | < Previous Page | 501 502 503 504 505 506 507 508 509 510 511 512  | Next Page >

  • 2010 Collaboration Summit Impressions

    - by Elena Zannoni
    It's a bit late, but there you have it anyway. April 14 to 16 I attended the Linux Foundation Collaboration Summit in SFO. I was running two tracks, one on tracing and one on tools. You can see the tracks and the slides here: http://events.linuxfoundation.org/events/collaboration-summit/slides I was pretty busy both days, Thursday with a whole day tracing track, Friday with a half day toolchain track. The sessions were well attended, the rooms were full, with people spilling in the hallways. Some new things were presented, like Kernelshark, by Steve Rostedt, a GUI (yes, believe it or not, a GUI) written in GTK. It is very nice, showing a timeline for traced kernel events, and you can zoom in and filter at will. It works on the latest kernels, and it requires some new things/fixes in GTK. I don't recall exactly what version of GTK though. Dominique Toupin from Ericsson presented something about user requirements for tracing. Mostly though about who's who in the embedded world, and eclipse. Masami and Mathieu presented an update on their work. See their slides. The interesting thing to me was of course the new version of uprobes w/o underlying utrace presented by Jim Keniston. At the end of the session we had a discussion about the future of utrace. Roland wasn't there, butTom Tromey (also from RedHat) collected the feedback. Basically we are at a standstill now that utrace has been rejected yet again. There wasn't much advise that anybody could give, except jokingly, we decided that the only way in is to make it a part of perf events. There needs to be another refactoring, but most of all, this "killer app" that would be enabled because of utrace hasn't materialized yet. We think that having a good debugging story on Linux is enough of a killer app, for instance allowing multiple tracers, and not relying on SIGCHLD etc. I think this wasn't completely clear to the kernel community. Trying to achieve debugging via a gdb stub inside the kernel interfacing to utrace and that is controlled via the gdb remote protocol also lost its appeal (thankfully, since the gdb remote protocol is archaic). Somebody would have to be creative in how to submit utrace. It doesn't have to be called utrace (it was really a random choice, for lack of a letter that was not already used in front of the word "trace"). So basically, I think the ideas behind utrace are sound, and the necessity of a new interface is acknowledged. But I believe the integration/submission process with the kernel folks has to restart from scratch, clean slate. We'll see. There are many conferences and meetings coming up in the near future where things can be discussed further. On the second day, Friday, we had the tools talks. It was interesting to observe the more "kernel" oriented people's behavior towards the gcc etc community. The first talk was by Mark Mitchell, about Gcc and its new plugin architecture. After that, Paolo talked about the new C++1x standard, which will be finalized in 2011. Many features are already implemented in the libstdc++ library and gcc and usable today. We had a few minutes (really, the half day track was quite short) where Bradley Kuhn from the Software Freedom Law Center explained the GPLv3 exception for gcc (due to the new gcc plugin architecture and the availability of the intermediate results from the compilation, which is a new thing). I will not try to explain, but basically you cannot take the result of the preprocessing and then use that in your own proprietary compiler. After, we had a talk by Ian Taylor about the new Gold linker. One good thing in that area is that they are trying to make gold the new default linker (for instance Fedora will use gold as the distro linker). However gold is very different from binutils' old linker. It doesn't use a linker script, for instance. The kernel has been linked with gold many times as an exercise (the ground work was done by Kris Van Hees), but this needs to be constantly tested/monitored because the kernel linker script is very complex, and uses esoteric features (Wenji is now monitoring that each kernel RC can be built with gold). It was positive that people are now aware of gold and the need for it to be ported to more architectures. It seems that the porting is very easy, with little arch dependent code. Finally Tom Tromey presented about gdb and the archer project. Archer is a development branch of gdb mostly done by RedHat, where they are focusing on better c++ printing, c++ expression parsing, and plugins. The archer work is merged regularly in the gdb mainline. In general it was a good conference. I did miss most of the first day, because that's when I flew in. But I caught a couple of talks. Nothing earth shattering, except for Google giving each person registered a free Android phone. Yey.

    Read the article

  • NoSQL Memcached API for MySQL: Latest Updates

    - by Mat Keep
    With data volumes exploding, it is vital to be able to ingest and query data at high speed. For this reason, MySQL has implemented NoSQL interfaces directly to the InnoDB and MySQL Cluster (NDB) storage engines, which bypass the SQL layer completely. Without SQL parsing and optimization, Key-Value data can be written directly to MySQL tables up to 9x faster, while maintaining ACID guarantees. In addition, users can continue to run complex queries with SQL across the same data set, providing real-time analytics to the business or anonymizing sensitive data before loading to big data platforms such as Hadoop, while still maintaining all of the advantages of their existing relational database infrastructure. This and more is discussed in the latest Guide to MySQL and NoSQL where you can learn more about using the APIs to scale new generations of web, cloud, mobile and social applications on the world's most widely deployed open source database The native Memcached API is part of the MySQL 5.6 Release Candidate, and is already available in the GA release of MySQL Cluster. By using the ubiquitous Memcached API for writing and reading data, developers can preserve their investments in Memcached infrastructure by re-using existing Memcached clients, while also eliminating the need for application changes. Speed, when combined with flexibility, is essential in the world of growing data volumes and variability. Complementing NoSQL access, support for on-line DDL (Data Definition Language) operations in MySQL 5.6 and MySQL Cluster enables DevOps teams to dynamically update their database schema to accommodate rapidly changing requirements, such as the need to capture additional data generated by their applications. These changes can be made without database downtime. Using the Memcached interface, developers do not need to define a schema at all when using MySQL Cluster. Lets look a little more closely at the Memcached implementations for both InnoDB and MySQL Cluster. Memcached Implementation for InnoDB The Memcached API for InnoDB is previewed as part of the MySQL 5.6 Release Candidate. As illustrated in the following figure, Memcached for InnoDB is implemented via a Memcached daemon plug-in to the mysqld process, with the Memcached protocol mapped to the native InnoDB API. Figure 1: Memcached API Implementation for InnoDB With the Memcached daemon running in the same process space, users get very low latency access to their data while also leveraging the scalability enhancements delivered with InnoDB and a simple deployment and management model. Multiple web / application servers can remotely access the Memcached / InnoDB server to get direct access to a shared data set. With simultaneous SQL access, users can maintain all the advanced functionality offered by InnoDB including support for Foreign Keys, XA transactions and complex JOIN operations. Benchmarks demonstrate that the NoSQL Memcached API for InnoDB delivers up to 9x higher performance than the SQL interface when inserting new key/value pairs, with a single low-end commodity server supporting nearly 70,000 Transactions per Second. Figure 2: Over 9x Faster INSERT Operations The delivered performance demonstrates MySQL with the native Memcached NoSQL interface is well suited for high-speed inserts with the added assurance of transactional guarantees. You can check out the latest Memcached / InnoDB developments and benchmarks here You can learn how to configure the Memcached API for InnoDB here Memcached Implementation for MySQL Cluster Memcached API support for MySQL Cluster was introduced with General Availability (GA) of the 7.2 release, and joins an extensive range of NoSQL interfaces that are already available for MySQL Cluster Like Memcached, MySQL Cluster provides a distributed hash table with in-memory performance. MySQL Cluster extends Memcached functionality by adding support for write-intensive workloads, a full relational model with ACID compliance (including persistence), rich query support, auto-sharding and 99.999% availability, with extensive management and monitoring capabilities. All writes are committed directly to MySQL Cluster, eliminating cache invalidation and the overhead of data consistency checking to ensure complete synchronization between the database and cache. Figure 3: Memcached API Implementation with MySQL Cluster Implementation is simple: 1. The application sends reads and writes to the Memcached process (using the standard Memcached API). 2. This invokes the Memcached Driver for NDB (which is part of the same process) 3. The NDB API is called, providing for very quick access to the data held in MySQL Cluster’s data nodes. The solution has been designed to be very flexible, allowing the application architect to find a configuration that best fits their needs. It is possible to co-locate the Memcached API in either the data nodes or application nodes, or alternatively within a dedicated Memcached layer. The benefit of this flexible approach to deployment is that users can configure behavior on a per-key-prefix basis (through tables in MySQL Cluster) and the application doesn’t have to care – it just uses the Memcached API and relies on the software to store data in the right place(s) and to keep everything synchronized. Using Memcached for Schema-less Data By default, every Key / Value is written to the same table with each Key / Value pair stored in a single row – thus allowing schema-less data storage. Alternatively, the developer can define a key-prefix so that each value is linked to a pre-defined column in a specific table. Of course if the application needs to access the same data through SQL then developers can map key prefixes to existing table columns, enabling Memcached access to schema-structured data already stored in MySQL Cluster. Conclusion Download the Guide to MySQL and NoSQL to learn more about NoSQL APIs and how you can use them to scale new generations of web, cloud, mobile and social applications on the world's most widely deployed open source database See how to build a social app with MySQL Cluster and the Memcached API from our on-demand webinar or take a look at the docs Don't hesitate to use the comments section below for any questions you may have 

    Read the article

  • Vodacom Call Center Management on the NetBeans Platform

    - by Geertjan
    If you live in South Africa, you know about Vodacom. Vodacom is one of the dominant mobile communication companies in South Africa, and beyond, providing voice, messaging, data, and similar mobile services. Inside Vodacom there's an application named Helios, which is a call centre application that had its inception in 2009 and consists of two parts. Firstly, a web-based front-end that allows a call centre agent to service subscribers using a Google-like search on a knowledge base structured as a collection of FAQs. The web-based front-end uses plain-old HTML + CSS + a good helping of JQuery and JQueryUI. This is delivered via JSR-168 portlets running on a cluster of IBM Portal 6 servers. In turn, the portlets communicate via RMI with several back-end EJB's containing the business logic. These EJB's are deployed on a cluster of Weblogic Application Servers, version 10.3.6. The second part is a NetBeans Platform application used for maintaining and constructing the knowledge base, i.e., the back-end of the web-based front-end. Helios is also used for a number of other maintenance functions, such as access permissions, user maintenance, and news bulletins. Below, in the web-based front-end, call centre agents can enter search terms and are presented with a number of FAQs from the knowledge base. Upon selecting a FAQ article, the agent is presented with the article text, the process to guide the subscriber, system checks that display information specific to the subscriber, and links to related applications and articles: Below, you can see that applications are searchable and can be accessed using the same web-based front-end as shown above. And, as can be seen below, knowledge base FAQs are maintained using the Helios Maintenance Application, which is the Vodacom application built on the NetBeans Platform: Several thousand call centre agent user accounts are administered using the Helios Maintenance Application. Below the main FAQ page is shown, together with the About dialog: Vodacom is happy with the back-end NetBeans Platform application. However, the front-end stack runs on quite old technology. Ideally Vodacom would like to migrate the portlets to Oracle Weblogic Portal or Oracle WebCenter, but this hasn't been accomplished yet. Migrating makes sense as the rest of the application server environment consists entirely of Oracle products.

    Read the article

  • FAT Volume and CE

    - by Kate Moss' Open Space
    Whenever we format a disk volume, it is a good idea to name the label so it will be easier to categorize. To label a volume, we can use LABEL command or UI depends on your preference. Windows CE does provide FAT driver and support various format (FAT12, FAT16,FAT32, ExFAT and TFAT - transaction-safe FAT) and many feature to let you scan and even defrag the volume but not labeling. At any time you format a volume in CE and then mount it on PC, the label is always empty! Of course, you can always label the volume on PC, even it is formatted in CE. So looks like CE does not care about the volume label at all, neither report the label to OS nor changing the label on FAT.So how can we set the volume label in CE? To Answer this question, we need to know how does FAT stores the volume label. Here are some on-line resources are handy for parsing FAT. http://en.wikipedia.org/wiki/File_Allocation_Table http://www.pjrc.com/tech/8051/ide/fat32.html http://www.microsoft.com/whdc/system/platform/firmware/fatgen.mspx You can refer to PUBLIC\COMMON\OAK\DRIVERS\FSD\FATUTIL\MAIN\bootsec.h and dosbpb.h or the above links for the fields we discuss here. The first sector of a FAT Volume (it is not necessary to be the first sector of a disk.) is a FAT boot sector and BPB (BIOS Parameter Block). And at offset 43, bgbsVolumeLabel (or bsVolumeLabel on FAT16) is for storing the volume lable, but note in the spec also indicates "FAT file system drivers should make sure that they update this field when the volume label file in the root directory has its name changed or created.". So we can't just simply update the bgbsVolumeLabel but also need to create a volume lable file in root directory. The volume lable file is not a real file but just a file entry in root directory with zero file lenth and a very special file attribute, ATTR_VOLUME_ID. (defined in public\common\oak\drivers\fsd\fatutil\MAIN\fatutilp.h) Locating and accessing bootsector is quite straight forward, as long as we know the starting sector of a FAT volume, that's it. But where is the root directory? The layout of a typical FAT is like this Boot sector (Volume ID in the figure) followed by Reserved Sectors (1 on FAT12/16 and 32 on FAT32), then FAT chain table(s) (can be 1 or 2), after that is the root directory (FAT12/16 and not shows in the figure) then begining of the File and Directories. In FAT12/16, the root directory is placed right after FAT so it is not hard to caculate the offset in the volume. But in FAT32, this rule is no longer true: the first cluster of the root directory is determined by BGBPB_RootDirStrtClus (or offset 44 in boot sector). Although this field is usually 0x00000002 (it is how CE initial the root directory after formating a volume. Note we should never assume it is always true) which means the first cluster contains data but not like the root directory is contiguous in FAT12/16, it is just like a regular file can be fragmented. So we need to access the root directory (of FAT32) hopping one cluster to another by traversing FAT table. Let's trace the code now. Although the source of FAT driver is not available in CE Shared Source program, but the formatter, Fatutil.dll, is available in public\common\oak\drivers\fsd\fatutil\MAIN\formatdisk.cpp. Be aware the public code only provides formatter for FAT12/16/32 for ExFAT it is still not available. FormatVolumeInternal is the main worker function. With the knowledge here, you should be able the trace the code easily. But I would like to discuss the following code pieces     dwReservedSectors = (fo.dwFatVersion == 32) ? 32 : 1;     dwRootEntries = (fo.dwFatVersion == 32) ? 0 : fo.dwRootEntries; Note the dwReservedSectors is 32 in FAT32 and 1 in FAT12/16. Root Entries is another different mentioned in previous paragraph, 0 for FAT32 (dynamic allocated) and fixed size (usually 512, defined in DEFAULT_ROOT_ENTRIES in public\common\sdk\inc\fatutil.h) And then here   memset(pBootSec->bsVolumeLabel, 0x20, sizeof(pBootSec->bsVolumeLabel)); It sets the Volume Label as empty string. Now let's carry on to the next section - write the root directory.     if (fo.dwFatVersion == 32) {         if (!(fo.dwFlags & FATUTIL_FORMAT_TFAT)) {             dwRootSectors = dwSectorsPerCluster;         }         else {             DIRENTRY    dirEntry;             DWORD       offset;             int               iVolumeNo;             memset(pbBlock, 0, pdi->di_bytes_per_sect);             memset(&dirEntry, 0, sizeof(DIRENTRY));                         dirEntry.de_attr = ATTR_VOLUME_ID;             // the first one is volume label             memcpy(dirEntry.de_name, "TFAT       ", sizeof (dirEntry.de_name));             memcpy(pbBlock, &dirEntry, sizeof(dirEntry));              ...             // Skip the next step of zeroing out clusters             dwCurrentSec += dwSectorsPerCluster;             dwRootSectors = 0;         }     }     // Each new root directory sector needs to be zeroed.     memset(pbBlock, 0, cbSizeBlk);     iRootSec=0;     while ( iRootSec < dwRootSectors) { Basically, the code zero out the each entry in root directory depends on dwRootSectors. In FAT12/16, the dwRootSectors is calculated as the sectors we need for the root entries (512 for most of the case) and in FAT32 it just zero out the one cluster. Please note that, if it is a TFAT volume, it initialize the root directory with special volume label entries for some special purpose. Despite to its unusual initialization process for TFAT, it does provide a example for how to create a volume entry. With some minor modification, we can assign the volume label in FAT formatter and also remember to sync the volume label with bsVolumeLabel or bgbsVolumeLabel in boot sector.

    Read the article

  • Creating a bare bone web-browser: After the html parser, javascript parser, etc have done their work, how do I display the content of the webpage?

    - by aste123
    This is a personal project to learn computer programming. I took a look at this: https://www.udacity.com/course/viewer#!/c-cs262 The following is the approach taken in it: Abstract Syntax Tree is created. But javascript is still not completely broken down in order not to confuse with the html tags. Then the javascript interpreter is called on it. Javascript interpreter stores the text from the write() and document.write() to be used later. Then a graphics library in Python is called which will convert everything to a pdf file and then we convert it into png or jpeg and then display it. My Question: I want to display the actual text in a window (which I will design later) like firefox or chrome does instead of image files so that the data can be selected, copied, etc by the user of the browser. How do I accomplish this? In other words, what are the other elements of a bare bone web browser that I am missing? I would prefer to implement most of the stuff in C++ although if things seem too complicated I might go with Python to save time and create a prototype and later creating another bare bone browser in C++ and add more features. This is a project to learn more. I do realize we already have lots of reliable browsers like firefox, etc. The way I feel it is done: I think after all the broken down contents have been created by the parsers and interpreters, I will need to access them individually from within the window's code (like qt) and then decide upon a good way to display them. I am not sure if it is the way this should be done. Additions after useful comment by Kilian Foth: I found this page: http://friendlybit.com/css/rendering-a-web-page-step-by-step/ 14. A DOM tree is built out of the broken HTML 15. New requests are made to the server for each new resource that is found in the HTML source (typically images, style sheets, and JavaScript files). Go back to step 3 and repeat for each resource. 16. Stylesheets are parsed, and the rendering information in each gets attached to the matching node in the DOM tree 17. Javascript is parsed and executed, and DOM nodes are moved and style information is updated accordingly 18. The browser renders the page on the screen according to the DOM tree and the style information for each node 19. You see the page on the screen I need help with step 18. How do I do that? How much work do Webkit and Gecko do? I want to use a readymade layout renderer for step number 18 and not for anything that comes before that.

    Read the article

  • My thoughts on the future of the web with respect to flash, plugins, etc…

    - by joelvarty
    More than 10 years ago I was coding Java applets.  They were great at the time because I could reasonably expect them to run the same way in Netscape and Internet Explorer.  I could also reliably do asynchronous networking back to the server.  But then, Microsoft pulled their native Java runtime from Windows and Internet Explorer.  It got a lot harder to get applets running in people’s browsers. So I started writing ActiveX controls for IE and Java applets for Netscape. Then I switched to Flash, not for too long, but it was enough for me to see that it was a capable and curious implementation of animation, multimedia and script. I even wrote a few Silverlight controls, but then I stopped. I stepped back from all of the “richness” and “interactivity” and I thought about things like accessibility and SEO.  I wondered how my apps and sites might appear to the greater world.  I wondered how the developers I am working with, or who might be inheriting my code down the road, might interact with it. And I thought to myself, What the hell was I thinking? Those embedded controls are not what the web is about, and they run contrary to nearly all of the things that makes the web exciting and fosters innovation within and around.   Those plugins or controls, or whatever you want to refer to them as, are only stop-gaps that fill a hole in the basic HTML/Script/CSS specifications, and that’s all they should ever be used for.  Full stop.  Period.  For instance, I still make use of a nifty little flash control called SWFUpload because it lets me check file size before an upload starts.  I can do the same thing from a Silverlight control.  But rest assured, if I could do this from native javascript, I would in a second.  In fact, the only reason I chose SWFUpload over a ton of other alternatives is that it has a great javascript API so I can do (nearly) all of the UI in regular HTML.  And I ALWAYS provide a non-flash alternative for uploading, and for the rest of any website where the designer has insisted on some piece of creativity that requires flash (usually because the designer is also the flash developer, but that’s an aside…). The web is about openness, and about exposing that openness in such a way that it can be taken advantage of as a small part of a greater whole.  Sure we need security and authentication and ssl and all that stuff, but for me, its something more profound.  For me, the majority of what the web is, is about exposing something that delivers meaning.  What meaning can we derive from an <object> tag?   more later - joel

    Read the article

  • JavaScript Intellisense Improvements with VS 2010

    - by ScottGu
    This is the twentieth in a series of blog posts I’m doing on the upcoming VS 2010 and .NET 4 release.  Today’s blog post covers some of the nice improvements coming with JavaScript intellisense with VS 2010 and the free Visual Web Developer 2010 Express.  You’ll find with VS 2010 that JavaScript Intellisense loads much faster for large script files and with large libraries, and that it now provides statement completion support for more advanced scenarios compared to previous versions of Visual Studio. [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] Improved JavaScript Intellisense Providing Intellisense for a dynamic language like JavaScript is more involved than doing so with a statically typed language like VB or C#.  Correctly inferring the shape and structure of variables, methods, etc is pretty much impossible without pseudo-executing the actual code itself – since JavaScript as a language is flexible enough to dynamically modify and morph these things at runtime.  VS 2010’s JavaScript code editor now has the smarts to perform this type of pseudo-code execution as you type – which is how its intellisense completion is kept accurate and complete.  Below is a simple walkthrough that shows off how rich and flexible it is with the final release. Scenario 1: Basic Type Inference When you declare a variable in JavaScript you do not have to declare its type.  Instead, the type of the variable is based on the value assigned to it.  Because VS 2010 pseudo-executes the code within the editor, it can dynamically infer the type of a variable, and provide the appropriate code intellisense based on the value assigned to a variable. For example, notice below how VS 2010 provides statement completion for a string (because we assigned a string to the “foo” variable): If we later assign a numeric value to “foo” the statement completion (after this assignment) automatically changes to provide intellisense for a number: Scenario 2: Intellisense When Manipulating Browser Objects It is pretty common with JavaScript to manipulate the DOM of a page, as well as work against browser objects available on the client.  Previous versions of Visual Studio would provide JavaScript statement completion against the standard browser objects – but didn’t provide much help with more advanced scenarios (like creating dynamic variables and methods).  VS 2010’s pseudo-execution of code within the editor now allows us to provide rich intellisense for a much broader set of scenarios. For example, below we are using the browser’s window object to create a global variable named “bar”.  Notice how we can now get intellisense (with correct type inference for a string) with VS 2010 when we later try and use it: When we assign the “bar” variable as a number (instead of as a string) the VS 2010 intellisense engine correctly infers its type and modifies statement completion appropriately to be that of a number instead: Scenario 3: Showing Off Because VS 2010 is psudo-executing code within the editor, it is able to handle a bunch of scenarios (both practical and wacky) that you throw at it – and is still able to provide accurate type inference and intellisense. For example, below we are using a for-loop and the browser’s window object to dynamically create and name multiple dynamic variables (bar1, bar2, bar3…bar9).  Notice how the editor’s intellisense engine identifies and provides statement completion for them: Because variables added via the browser’s window object are also global variables – they also now show up in the global variable intellisense drop-down as well: Better yet – type inference is still fully supported.  So if we assign a string to a dynamically named variable we will get type inference for a string.  If we assign a number we’ll get type inference for a number.  Just for fun (and to show off!) we could adjust our for-loop to assign a string for even numbered variables (bar2, bar4, bar6, etc) and assign a number for odd numbered variables (bar1, bar3, bar5, etc): Notice above how we get statement completion for a string for the “bar2” variable.  Notice below how for “bar1” we get statement completion for a number:   This isn’t just a cool pet trick While the above example is a bit contrived, the approach of dynamically creating variables, methods and event handlers on the fly is pretty common with many Javascript libraries.  Many of the more popular libraries use these techniques to keep the size of script library downloads as small as possible.  VS 2010’s support for parsing and pseudo-executing libraries that use these techniques ensures that you get better code Intellisense out of the box when programming against them. Summary Visual Studio 2010 (and the free Visual Web Developer 2010 Express) now provide much richer JavaScript intellisense support.  This support works with pretty much all popular JavaScript libraries.  It should help provide a much better development experience when coding client-side JavaScript and enabling AJAX scenarios within your ASP.NET applications. Hope this helps, Scott P.S. You can read my previous blog post on VS 2008’s JavaScript Intellisense to learn more about our previous JavaScript intellisense (and some of the scenarios it supported).  VS 2010 obviously supports all of the scenarios previously enabled with VS 2008.

    Read the article

  • User Experience Highlights in Siebel: Direct from George Jacob

    - by mvaughan
    By Misha Vaughan and Kathy Miedema, Oracle Applications User Experience This is the first in a series of blog posts on the user experience (UX) highlights coming in various Oracle product families. You’ll see themes around productivity and efficiency, as well as a thoughtful approach to pushing UX capabilities into the underlying tooling. Of course, you can also expect to get an early look at the latest mobile offerings coming through these product lines.Today’s post is on Siebel. To learn more about what’s ahead, attend Siebel OpenWorld presentations. Our first interview is with George Jacob, the Group Vice President for CRM Applications. George Jacob Q: How would you describe the vision you have for the user experience of Siebel? A: Contemporary: Siebel runs in all browsers and all browser-capable devices using the latest web technology standards, such as Javascript, CSS, and HTML 5.Productive: Siebel is designed for a user experience that reduces clutter and user keystrokes.User-sensitive: The user experience enables Siebel to adapt easily to site and user preferences.Q: How are the UX features you have delivered so far resonating with customers? A:  Customers are very excited about our refresh of the Siebel user interface framework; the Siebel roadmap and user interface sessions at Oracle OpenWorld last year overflowed. We have had to turn back customer requests to participate in the early adopter program because we had more than we could handle. Customers are calling this a game-changer for Siebel.Q: So the UX highlights are popular? A: Yes, the UX highlights are very popular, although to a certain extent we expected this!  Q: What’s coming in Siebel on a mobile platform? A: Our current mobile offering is based on Windows Mobile (native application), and is fairly mature (over 5 years). The new Siebel Open User Interface Framework, by virtue of working on all browsers, will run – when it is released this year – on tablets and smartphones. This is one of the reasons a number of customers are most excited about our UX changes. Views of Siebel data on mobile devices Q: What are you working on now that you think is going to be exciting to customers at OOW? A: We are working on the Siebel Open User Interface Framework, to be released this year in the Siebel 2012 8.1.1.9 & 8.2.2.2 innovation packs. We are also working on Connected Mobile applications for Sales, Service, Consumer Goods and Pharmaceuticals, and Disconnected Mobile applications for Pharmaceuticals in the same release. We are building specialized applications that exploit the new UI framework for Telco Order Capture and for Life Sciences healthcare professional visits. Our 2012 delivery will be the foundation for further user experience enhancements, next year and beyond.Q: What do you want Siebel customers to know? A:  We are excited to be focused on improving the user experience of Siebel applications, and it is encouraging to see the positive feedback from Siebel customers and partners.If you would like to see more in the Siebel user experience, be sure to check out these sessions at OpenWorld: CON9700 - Siebel CRM Overview, Strategy, and Roadmap CON9703 - User Interface Innovations with the New Siebel “Open UI” CON9705 - Unleash the Power of “Open UI” CON9697 - Mobile Solutions for Siebel CRM

    Read the article

  • ASP.NET Web API and Simple Value Parameters from POSTed data

    - by Rick Strahl
    In testing out various features of Web API I've found a few oddities in the way that the serialization is handled. These are probably not super common but they may throw you for a loop. Here's what I found. Simple Parameters from Xml or JSON Content Web API makes it very easy to create action methods that accept parameters that are automatically parsed from XML or JSON request bodies. For example, you can send a JavaScript JSON object to the server and Web API happily deserializes it for you. This works just fine:public string ReturnAlbumInfo(Album album) { return album.AlbumName + " (" + album.YearReleased.ToString() + ")"; } However, if you have methods that accept simple parameter types like strings, dates, number etc., those methods don't receive their parameters from XML or JSON body by default and you may end up with failures. Take the following two very simple methods:public string ReturnString(string message) { return message; } public HttpResponseMessage ReturnDateTime(DateTime time) { return Request.CreateResponse<DateTime>(HttpStatusCode.OK, time); } The first one accepts a string and if called with a JSON string from the client like this:var client = new HttpClient(); var result = client.PostAsJsonAsync<string>(http://rasxps/AspNetWebApi/albums/rpc/ReturnString, "Hello World").Result; which results in a trace like this: POST http://rasxps/AspNetWebApi/albums/rpc/ReturnString HTTP/1.1Content-Type: application/json; charset=utf-8Host: rasxpsContent-Length: 13Expect: 100-continueConnection: Keep-Alive "Hello World" produces… wait for it: null. Sending a date in the same fashion:var client = new HttpClient(); var result = client.PostAsJsonAsync<DateTime>(http://rasxps/AspNetWebApi/albums/rpc/ReturnDateTime, new DateTime(2012, 1, 1)).Result; results in this trace: POST http://rasxps/AspNetWebApi/albums/rpc/ReturnDateTime HTTP/1.1Content-Type: application/json; charset=utf-8Host: rasxpsContent-Length: 30Expect: 100-continueConnection: Keep-Alive "\/Date(1325412000000-1000)\/" (yes still the ugly MS AJAX date, yuk! This will supposedly change by RTM with Json.net used for client serialization) produces an error response: The parameters dictionary contains a null entry for parameter 'time' of non-nullable type 'System.DateTime' for method 'System.Net.Http.HttpResponseMessage ReturnDateTime(System.DateTime)' in 'AspNetWebApi.Controllers.AlbumApiController'. An optional parameter must be a reference type, a nullable type, or be declared as an optional parameter. Basically any simple parameters are not parsed properly resulting in null being sent to the method. For the string the call doesn't fail, but for the non-nullable date it produces an error because the method can't handle a null value. This behavior is a bit unexpected to say the least, but there's a simple solution to make this work using an explicit [FromBody] attribute:public string ReturnString([FromBody] string message) andpublic HttpResponseMessage ReturnDateTime([FromBody] DateTime time) which explicitly instructs Web API to read the value from the body. UrlEncoded Form Variable Parsing Another similar issue I ran into is with POST Form Variable binding. Web API can retrieve parameters from the QueryString and Route Values but it doesn't explicitly map parameters from POST values either. Taking our same ReturnString function from earlier and posting a message POST variable like this:var formVars = new Dictionary<string,string>(); formVars.Add("message", "Some Value"); var content = new FormUrlEncodedContent(formVars); var client = new HttpClient(); var result = client.PostAsync(http://rasxps/AspNetWebApi/albums/rpc/ReturnString, content).Result; which produces this trace: POST http://rasxps/AspNetWebApi/albums/rpc/ReturnString HTTP/1.1Content-Type: application/x-www-form-urlencodedHost: rasxpsContent-Length: 18Expect: 100-continue message=Some+Value When calling ReturnString:public string ReturnString(string message) { return message; } unfortunately it does not map the message value to the message parameter. This sort of mapping unfortunately is not available in Web API. Web API does support binding to form variables but only as part of model binding, which binds object properties to the POST variables. Sending the same message as in the previous example you can use the following code to pick up POST variable data:public string ReturnMessageModel(MessageModel model) { return model.Message; } public class MessageModel { public string Message { get; set; }} Note that the model is bound and the message form variable is mapped to the Message property as would other variables to properties if there were more. This works but it's not very dynamic. There's no real easy way to retrieve form variables (or query string values for that matter) in Web API's Request object as far as I can discern. Well only if you consider this easy:public string ReturnString() { var formData = Request.Content.ReadAsAsync<FormDataCollection>().Result; return formData.Get("message"); } Oddly FormDataCollection does not allow for indexers to work so you have to use the .Get() method which is rather odd. If you're running under IIS/Cassini you can always resort to the old and trusty HttpContext access for request data:public string ReturnString() { return HttpContext.Current.Request.Form["message"]; } which works fine and is easier. It's kind of a bummer that HttpRequestMessage doesn't expose some sort of raw Request object that has access to dynamic data - given that it's meant to serve as a generic REST/HTTP API that seems like a crucial missing piece. I don't see any way to read query string values either. To me personally HttpContext works, since I don't see myself using self-hosted code much.© Rick Strahl, West Wind Technologies, 2005-2012Posted in Web Api   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • Fluid VS Responsive Website Development Questions

    - by Aditya P
    As I understand these form the basis for targeting a wide array of devices based on the browser size, given it would be a time consuming to generate different layouts targeting different/specific devices and their resolutions. Questions: Firstly right to the jargon, is there any actual difference between the two or do they mean the same? Is it safe to classify the current development mainly a html5/css3 based one? What popular frameworks are available to easily implement this? What testing methods used in this regard? What are the most common compatibility issues in terms of different browser types? I understand there are methods like this http://css-tricks.com/resolution-specific-stylesheets/ which does this come under?. Are there any external browser detection methods besides the API calls specific to the browser that are employed in this regard? Points of interest [Prior Research before asking these questions] Why shouldn't "responsive" web design be a consideration? Responsive Web Design Tips, Best Practices and Dynamic Image Scaling Techniques A recent list of tutorials 30 Responsive Web Design and Development Tutorials by Eric Shafer on May 14, 2012 Update Ive been reading that the basic point of designing content for different layouts to facilitate a responsive web design is to present the most relevant information. now obviously between the smallest screen width and the highest we are missing out on design elements. I gather from here http://flashsolver.com/2012/03/24/5-top-commercial-responsive-web-designs/ The top of the line design layouts (widths) are desktop layout (980px) tablet layout (768px) smartphone layout – landscape (480px) smartphone layout – portrait (320px) Also we have a popular responsive website testing site http://resizemybrowser.com/ which lists different screen resolutions. I've also come across this while trying to find out the optimal highest layout size to account for http://stackoverflow.com/questions/10538599/default-web-page-width-1024px-or-980px which brings to light seemingly that 1366x768 is a popular web resolution. Is it safe to assume that just accounting for proper scaling from width 980px onwards to the maximum size would be sufficient to accommodate this? given we aren't presenting any new information for the new size. Does it make sense to have additional information ( which conflicts with purpose of responsive web design) to utilize the top size and beyond?

    Read the article

  • Apache2 "pseudo" doc root

    - by Brent
    I have several folders in my /www folder that contain various applications. To keep things organized, I keep them in their own folders -- this includes my base application. Examples: phpmyadmin = /www/phpmyadmin phpvirtualbox = /www/phpvirtualbox root domain site = /www/Landing The reason I segregate all of my sites is that I actively develop on some of these (my root site) and when I publish via Visual Studio, I choose to delete prior to upload - if I put the Landing page in the base folder, it would be devastating for me. My goal is that when I go to www.example.com - I go to my page. If I go to www.example.com/phpmyadmin, it does not work because of this in the Apache2 folder: <Location "/"> # Error is the "/" Allow from all Order allow,deny MonoSetServerAlias domain SetHandler mono SetOutputFilter DEFLATE SetEnvIfNoCase Request_URI "\.(?:gif|jpe?g|png)$" no-gzip dont-vary </Location> <IfModule mod_deflate.c> AddOutputFilterByType DEFLATE text/html text/plain text/xml text/javascript </IfModule> If I change the location to say "/Other", then the base site is broken, and the aliases are restored for the other sites. If it is "/", then the base site works and no aliases work. What could I do to allow it to treat my /www/Landing as my webroot, but when I go to an alias, it GOES to the alias. Edit: Added in the default VirtualHost info. DocumentRoot /var/www <VirtualHost *:80> ServerAdmin [email protected] ServerName www.example.com ExpiresActive On ExpiresByType image/gif A2592000 ExpiresByType image/png A2592000 ExpiresByType image/jpg A2592000 ExpiresByType image/jpeg A2592000 ExpiresByType text/css "access plus 1 days" MonoServerPath domain "/usr/bin/mod-mono-server4" MonoDebug domain true MonoSetEnv domain MONO_IOMAP=all MonoApplications domain "/:/var/www/Landing" RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME} !-f RewriteRule (.*) /Landing/$1 [L] #Need to watch what the Location is set to. Can cause issues for alias <Location "/"> Allow from all Order allow,deny MonoSetServerAlias domain SetHandler mono SetOutputFilter DEFLATE SetEnvIfNoCase Request_URI "\.(?:gif|jpe?g|png)$" no-gzip dont-vary </Location> <IfModule mod_deflate.c> AddOutputFilterByType DEFLATE text/html text/plain text/xml text/javascript </IfModule> ErrorLog ${APACHE_LOG_DIR}/error.log LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost>

    Read the article

  • SQL SERVER – SSMS: Database Consistency History Report

    - by Pinal Dave
    Doctor and Database The last place I like to visit is always a hospital. With the monsoon season starting, intermittent rains, it has become sort of a routine to get a cycle of fever every other year (seriously I hate it). So when I visit my doctor, it is always interesting in the way he quizzes me. The routine question of – “How many days have you had this?”, “Is there any pattern?”, “Did you drench in rain?”, “Do you have any other symptom?” and so on. The idea here is that the doctor wants to find any anomaly or a pattern that will guide him to a viral or bacterial type. Most of the time they get it based on experience and sometimes after a battery of tests. So if there is consistent behavior to your problem, there is always a solution out. SQL Server has its way to find if the server data / files are in consistent state using the DBCC commands. Back to SQL Server In real life, Database consistency check is one of the critical operations a DBA generally doesn’t give much priority. Many readers of my blogs have asked many times, how do we know if the database is consistent? How do I read output of DBCC CHECKDB and find if everything is right or not? My common answer to all of them is – look at the bottom of checkdb (or checktable) output and look for below line. CHECKDB found 0 allocation errors and 0 consistency errors in database ‘DatabaseName’. Above is a “good sign” because we are seeing zero allocation and zero consistency error. If you are seeing non-zero errors then there is some problem with the database. Sample output is shown as below: CHECKDB found 0 allocation errors and 2 consistency errors in database ‘DatabaseName’. repair_allow_data_loss is the minimum repair level for the errors found by DBCC CHECKDB (DatabaseName). If we see non-zero error then most of the time (not always) we get repair options depending on the level of corruption. There is risk involved with above option (repair_allow_data_loss), that is – we would lose the data. Sometimes the option would be repair_rebuild which is little safer. Though these options are available, it is important to find the root cause to the problem. In standard report, there is a report which can show the history of checkdb executed for the selected database. Since this is a database level report, we need to right click on database, click Reports, click Standard Reports and then choose “Database Consistency History” report. The information in this report is picked from default trace. If default trace is disabled or there is no checkdb run or information is not there in default trace (because it’s rolled over), we would get report like below. As we can see report says it very clearly: Currently, no execution history of CHECKDB is available or default trace is not enabled. To demonstrate, I have caused corruption in one of the database and did below steps. Run CheckDB so that errors are reported. Fix the corruption by losing the data using repair option Run CheckDB again to check if corruption is cleared. After that I have launched the report and below is what we would see. If you are lazy like me and don’t want to run the report manually for each database then below query would be handy to provide same report for all database. This query is runs behind the scenes by the report. All I have done is remove the filter for database name (at the last – highlighted). DECLARE @curr_tracefilename VARCHAR(500); DECLARE @base_tracefilename VARCHAR(500); DECLARE @indx INT; SELECT @curr_tracefilename = path FROM sys.traces WHERE is_default = 1; SET @curr_tracefilename = REVERSE(@curr_tracefilename); SELECT @indx  = PATINDEX('%\%', @curr_tracefilename) ; SET @curr_tracefilename = REVERSE(@curr_tracefilename); SET @base_tracefilename = LEFT( @curr_tracefilename,LEN(@curr_tracefilename) - @indx) + '\log.trc'; SELECT  SUBSTRING(CONVERT(NVARCHAR(MAX),TEXTData),36, PATINDEX('%executed%',TEXTData)-36) AS command ,       LoginName ,       StartTime ,       CONVERT(INT,SUBSTRING(CONVERT(NVARCHAR(MAX),TEXTData),PATINDEX('%found%',TEXTData) +6,PATINDEX('%errors %',TEXTData)-PATINDEX('%found%',TEXTData)-6)) AS errors ,       CONVERT(INT,SUBSTRING(CONVERT(NVARCHAR(MAX),TEXTData),PATINDEX('%repaired%',TEXTData) +9,PATINDEX('%errors.%',TEXTData)-PATINDEX('%repaired%',TEXTData)-9)) repaired ,       SUBSTRING(CONVERT(NVARCHAR(MAX),TEXTData),PATINDEX('%time:%',TEXTData)+6,PATINDEX('%hours%',TEXTData)-PATINDEX('%time:%',TEXTData)-6)+':'+SUBSTRING(CONVERT(NVARCHAR(MAX),TEXTData),PATINDEX('%hours%',TEXTData) +6,PATINDEX('%minutes%',TEXTData)-PATINDEX('%hours%',TEXTData)-6)+':'+SUBSTRING(CONVERT(NVARCHAR(MAX),TEXTData),PATINDEX('%minutes%',TEXTData) +8,PATINDEX('%seconds.%',TEXTData)-PATINDEX('%minutes%',TEXTData)-8) AS time FROM::fn_trace_gettable( @base_tracefilename, DEFAULT) WHERE EventClass = 22 AND SUBSTRING(TEXTData,36,12) = 'DBCC CHECKDB' -- AND DatabaseName = @DatabaseName; Don’t get worried about the logic above. All it is doing is reading the trace files, parsing below entry and getting out information for underlined words. DBCC CHECKDB (CorruptedDatabase) executed by sa found 2 errors and repaired 0 errors. Elapsed time: 0 hours 0 minutes 0 seconds.  Internal database snapshot has split point LSN = 00000029:00000030:0001 and first LSN = 00000029:00000020:0001. Hopefully now onwards you would run checkdb and understand the importance of it. As responsible DBAs I am sure you are already doing it, let me know how often do you actually run them on you production environment? Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL Tagged: SQL Reports

    Read the article

  • How to replace the SharePoint date calendar control with more user friendly jQuery calendar control

    - by ybbest
    When you use the SharePoint date and time type for date of birth field, you will notice that the calendar control is extremely non-user-friendly. You can only navigate month by month as shown below. To resolve the issue, you can customize the list form page using SharePoint designer and replace the OOB calendar control with popular jQuery control. The solution works for both SharePoint 2010,2013 and office365. Here are the steps for how to achieve this. 1. Open SharePoint designer and create a New List Form called customNew and set as default form for the selected type. 2. Open style library in file explorer and copy jQuery and jQuery UI files into the style library in SharePoint site. You can download the jQuery and jQuery UI from the web and the content of the contactPersonCustomNewForm.js is as below. I use the dd/mm/yy format as my locale in Regional Settings is English(New Zealand). You need to change this if you live in another country with different date format $(document).ready(function() { $("img#ctl00_m_g_540b9a50_52dc_4400_a58d_1db99555fddf_ff41_ctl00_ctl00_DateTimeField_DateTimeFieldDateDatePickerImage").parent().hide(); $("img#ctl00_m_g_540b9a50_52dc_4400_a58d_1db99555fddf_ff41_ctl00_ctl00_DateTimeField_DateTimeFieldDateDatePickerImage").hide(); $("input#ctl00_m_g_540b9a50_52dc_4400_a58d_1db99555fddf_ff41_ctl00_ctl00_DateTimeField_DateTimeFieldDate").datepicker({ changeMonth:true, changeYear:true, showOn: "button", buttonImage: "/_layouts/images/calendar.gif", buttonImageOnly: true, defaultDate:"01/01/1970", yearRange: "c-20:c+20", dateFormat: "dd/mm/yy" }); }); In order to get the image and textbox selector above , you can open IE developer toolbar(click F12) and find the control ID as below: 3. Open SharePoint designer and edit the newly created New List Form customNew.aspx in advance mode. Then copy and paste the following links in the PlaceHolderAdditionalPageHead. <SharePoint:CssRegistration name="<%$SPUrl:~SiteCollection/Style Library/themes/ui-lightness/jquery-ui.css%>" runat="server"/> <SharePoint:ScriptLink language="javascript" name="~sitecollection/Style Library/jquery-1.10.2.js" Defer="false" runat="server"/> <SharePoint:ScriptLink language="javascript" name="~sitecollection/Style Library/jquery-ui-1.10.4.custom.min.js" Defer="false" runat="server"/> <SharePoint:ScriptLink language="javascript" name="~sitecollection/Style Library/contactPersonCustomNewForm.js" Defer="false" runat="server"/>   4. Now go to the list and click add, you will see the new calendar control as shown below

    Read the article

  • SQLOS and Cloud Infrastructure sessions at PASS Summit 2012

    - by SQLOS Team
    The SQL Pass Summit 2012, the largest yet, is in full swing. Here's a summary of the sessions this week on cloud infrastructure and SQLOS topics. Some of these were today, and you can catch the recordings. One more session takes place on Friday covering SQL Server solution patterns in Windows Azure VMs... Also, catch Thursday's keynote with Quentin Clark which will feature a cool IaaS demo!   SQL Server in Windows Azure VM Sessions CLD-309-A SQLCAT: Best Practices and Lessons Learned on SQL Server in an Azure VM Steve Howard, Arvind Ranasaria - Wednesday 11/6 10:15 This session looked at some best practices to optimize Networking, Memory, Disk IO and high availability based on lessons learned during SQLCat work with customer deployments. Well worth catching the recording.   SQL Server in Azure VM patterns: Hybrid Disaster Recovery, data movement and BI Guy Bowerman, Peter Saddow, Michael Washam, Ross LoForte - Friday 11/9 9:45 Rm 613 [Note: In the guides this has an outdated title.] This session has a focus on SQL Server Azure VM solutions. Starting with the basics and then going deeper into: - New features in the Microsoft Assessment and Planning Toolkit 8.0 to help plan and size SQL VM migrations.- A Look at a Windows Azure VM SQL Server app making use of load balancing and SQL Server high availability features.- A BI case study running SQL BI components in Azure VMs and making use of Windows 8 tiles.- A training class in a VM case study.   SQLOS Sessions DBA-500-HD Inside SQLOS 2012 (half-day session) Bob Ward - Wednesday 11/6 1:30pm Bob Ward from CSS applies his wealth of experience to look at the internals of SQLOS and what's changed in the various SQL 2012 components, including memory, resource governor, scheduler.   DBA-403-M: SQLCAT: Memory Manager Changes in SQL Server 2012 Gus Apostol, Jerome Halmans - 1:30pm Covers the redesigned SQLOS memory manager in SQL Server 2012 including the new page allocator for any size pages (and all that implies), DMVs, demo's. Not sure why this was placed at the same time as the SQLOS half-day session, but since it's recorded it's available for catch-up.   - Guy   Originally posted at http://blogs.msdn.com/b/sqlosteam/

    Read the article

  • Avoiding Flicker with JQuery Tabs

    - by Damon
    I am a huge fan of JQuery because it seems like every time I want to do something it has a plugin that already does it.  Adding a tabbed interface to a web page was always quite an annoyance, but JQuery UI offers a pretty descent tabs solution (click here to see it).  If you read through the documentation, you'll find that you can create a tabbed interface by calling the tabs() method on an element containing an unordered list.  The only problem that I've experienced with the method is that on slower machines you can see the unordered list render out in its original state before being updated into the final tabbed interface.  A quick way to fix that issues is to set the CSS display property of the element to none, then call the show() method directly after calling the tabs() method.  This keeps the element completely hidden while JQuery sets up the tabs interface and eliminates the flicker. <SCRIPT type="text/javascript">      $(function()      {           $("#tabs").tabs();           $("#tabs").show();      }); </SCRIPT> <div id="tabs" style="display:none;">     <ul>         <li><a href="#tabs-1">First Tab</a></li>         <li><a href="#tabs-2">Second Tab</a></li>         <li><a href="#tabs-3">Third Tab</a></li>     </ul>     ... </div>

    Read the article

  • Goodbye XML&hellip; Hello YAML (part 2)

    - by Brian Genisio's House Of Bilz
    Part 1 After I explained my motivation for using YAML instead of XML for my data, I got a lot of people asking me what type of tooling is available in the .Net space for consuming YAML.  In this post, I will discuss a nice tooling option as well as describe some small modifications to leverage the extremely powerful dynamic capabilities of C# 4.0.  I will be referring to the following YAML file throughout this post Recipe: Title: Macaroni and Cheese Description: My favorite comfort food. Author: Brian Genisio TimeToPrepare: 30 Minutes Ingredients: - Name: Cheese Quantity: 3 Units: cups - Name: Macaroni Quantity: 16 Units: oz Steps: - Number: 1 Description: Cook the macaroni - Number: 2 Description: Melt the cheese - Number: 3 Description: Mix the cooked macaroni with the melted cheese Tooling It turns out that there are several implementations of YAML tools out there.  The neatest one, in my opinion, is YAML for .NET, Visual Studio and Powershell.  It includes a great editor plug-in for Visual Studio as well as YamlCore, which is a parsing engine for .Net.  It is in active development still, but it is certainly enough to get you going with YAML in .Net.  Start by referenceing YamlCore.dll, load your document, and you are on your way.  Here is an example of using the parser to get the title of the Recipe: var yaml = YamlLanguage.FileTo("Data.yaml") as Hashtable; var recipe = yaml["Recipe"] as Hashtable; var title = recipe["Title"] as string; In a similar way, you can access data in the Ingredients set: var yaml = YamlLanguage.FileTo("Data.yaml") as Hashtable; var recipe = yaml["Recipe"] as Hashtable; var ingredients = recipe["Ingredients"] as ArrayList; foreach (Hashtable ingredient in ingredients) { var name = ingredient["Name"] as string; } You may have noticed that YamlCore uses non-generic Hashtables and ArrayLists.  This is because YamlCore was designed to work in all .Net versions, including 1.0.  Everything in the parsed tree is one of two things: Hashtable, ArrayList or Value type (usually String).  This translates well to the YAML structure where everything is either a Map, a Set or a Value.  Taking it further Personally, I really dislike writing code like this.  Years ago, I promised myself to never write the words Hashtable or ArrayList in my .Net code again.  They are ugly, mostly depreciated collections that existed before we got generics in C# 2.0.  Now, especially that we have dynamic capabilities in C# 4.0, we can do a lot better than this.  With a relatively small amount of code, you can wrap the Hashtables and Array lists with a dynamic wrapper (wrapper code at the bottom of this post).  The same code can be re-written to look like this: dynamic doc = YamlDoc.Load("Data.yaml"); var title = doc.Recipe.Title; And dynamic doc = YamlDoc.Load("Data.yaml"); foreach (dynamic ingredient in doc.Recipe.Ingredients) { var name = ingredient.Name; } I significantly prefer this code over the previous.  That’s not all… the magic really happens when we take this concept into WPF.  With a single line of code, you can bind to the data dynamically in the view: DataContext = YamlDoc.Load("Data.yaml"); Then, your XAML is extremely straight-forward (Nothing else.  No static types, no adapter code.  Nothing): <StackPanel> <TextBlock Text="{Binding Recipe.Title}" /> <TextBlock Text="{Binding Recipe.Description}" /> <TextBlock Text="{Binding Recipe.Author}" /> <TextBlock Text="{Binding Recipe.TimeToPrepare}" /> <TextBlock Text="Ingredients:" FontWeight="Bold" /> <ItemsControl ItemsSource="{Binding Recipe.Ingredients}" Margin="10,0,0,0"> <ItemsControl.ItemTemplate> <DataTemplate> <StackPanel Orientation="Horizontal"> <TextBlock Text="{Binding Quantity}" /> <TextBlock Text=" " /> <TextBlock Text="{Binding Units}" /> <TextBlock Text=" of " /> <TextBlock Text="{Binding Name}" /> </StackPanel> </DataTemplate> </ItemsControl.ItemTemplate> </ItemsControl> <TextBlock Text="Steps:" FontWeight="Bold" /> <ItemsControl ItemsSource="{Binding Recipe.Steps}" Margin="10,0,0,0"> <ItemsControl.ItemTemplate> <DataTemplate> <StackPanel Orientation="Horizontal"> <TextBlock Text="{Binding Number}" /> <TextBlock Text=": " /> <TextBlock Text="{Binding Description}" /> </StackPanel> </DataTemplate> </ItemsControl.ItemTemplate> </ItemsControl> </StackPanel> This nifty XAML binding trick only works in WPF, unfortunately.  Silverlight handles binding differently, so they don’t support binding to dynamic objects as of late (March 2010).  This, in my opinion, is a major lacking feature in Silverlight and I really hope we will see this feature available to us in Silverlight 4 Release.  (I am not very optimistic for Silverlight 4, but I can hope for the feature in Silverlight 5, can’t I?) Conclusion I still have a few things I want to say about using YAML in the .Net space including de-serialization and using IronRuby for your YAML parser, but this post is hopefully enough to see how easy it is to incorporate YAML documents in your code. Codeplex Site for YAML tools Dynamic wrapper for YamlCore

    Read the article

  • Cooking with Wessty: HTML 5 and Visual Studio

    - by David Wesst
    The hardest part about using a new technology, such as HTML 5, is getting to what features are available and the syntax. One way to learn how to use new technologies is to adapt your current development to help you use the technology in comfort of your own development environment. For .NET Web Developers, that environment is usually Visual Studio 2010. This technique intends on showing you how to get HTML 5 Intellisense working in your current version of Visual Studio 2008 or 2010, making it easier for you to start using HTML 5 features in your current .NET web development projects. Quick Note According to the Visual Web Developer team at Microsoft, the Visual Studio 2010 SP1 beta has support for both HTML 5 and CSS 3. If you are willing to try out the bleeding edge update from Microsoft, then you won’t need this technique. --- Ingredients Visual Studio 2008 or 2010 Your favourite HTML 5 compliant browser (e.g. Internet Explorer 9) Administrator privileges, or the ability to install Visual Studio Extensions in your development environment. Directions Download the HTML 5 Intellisense for Visual Studio 2008 and 2010 extension from the Visual Studio Extension Gallery. Install it. Open Visual Studio. Open up a web file, such as an HTML or ASPX file. he HTML Source Editing toolbar should have appeared. (Optional) If it did not appear, you can activate it through the main menu by selecting View, then Toolbars, and then select HTML Source Editing if it does not have a checkbox beside it. (NOTE: If there is a checkbox, then the toolbar is enabled) In the HTML Source Editing toolbar, open up the validation schema drop box, and select HTML 5. Et voila! You now have HTML 5 intellisense enabled to help you get started in adding HTML 5 awesomeness to your web sites and web applications. Optional – Setting HTML 5 Validation Options At this point, you may want to select how Visual Studio shows validation errors. You can do that in the Options Menu. To get to the Options Menu… In the main menu select Tools, then Options. In the Options window, select and expand Text Editor, then HTML, followed by selecting Validation. Resources HTML 5 Intellisense for Visual Studio 2008 and 2010 extenstion Visual Studio Extension Gallery Visual Studio 2010 SP1 Beta This post also appears at http://david.wes.st

    Read the article

  • WebCenter Spaces 11g PS2 Template Customization

    - by javier.ductor(at)oracle.com
    Recently, we have been involved in a WebCenter Spaces customization project. Customer sent us a prototype website in HTML, and we had to transform Spaces to set the same look&feel as in the prototype.Protoype:First of all, we downloaded a Virtual Machine with WebCenter Spaces 11g PS2, same version as customer's. The next step was to download ExtendWebCenterSpaces application. This is a webcenter application that customizes several elements of WebCenter Spaces: templates, skins, landing page, etc. jDeveloper configuration is needed, we followed steps described in Extended Guide, this blog was helpful too. . After that, we deployed the application using WebLogic console, we created a new group space and assigned the ExtendedWebCenterSpaces template (portalCentricSiteTemplate) to it. The result was this:As you may see there is a big difference with the prototype, which meant a lot of work to do from our side.So we needed to create a new Spaces template with its skin.Using jDeveloper, we created a new template based on the default template. We removed all menus we did not need and inserted 'include'  tags for header, breadcrumb and footers. Each of these elements was defined in an isolated jspx file.In the beginning, we faced a problem: we had to add code from prototype (in plain HTML) to jspx templates (JSF language). We managed to workaround this issue using 'verbatim' tags with 'CDATA' surrounding HTML code in header, breadcrumb and footers.Once the template was modified, we added css styles to the default skin. So we had some styles from portalCentricSiteTemplate plus styles from customer's prototype.Then, we re-deployed the application, assigned this template to a new group space and checked the result. After testing, we usually found issues, so we had to do some modifications in the application, then it was necessary to re-deploy the application and restart Spaces server. Due to this fact, the testing process takes quite a bit of time.Added to the template and skin customization, we also customized the Landing Page using this application and Members task flow using another application: SpacesTaskflowCustomizationApplication. I will talk about this task flow customization in a future entry.After some issues and workarounds, eventually we managed to get this look&feel in Spaces:P.S. In this customization I was working with Francisco Vega and Jose Antonio Labrada, consultants from Oracle Malaga International Consulting Centre.

    Read the article

  • New Replication, Optimizer and High Availability features in MySQL 5.6.5!

    - by Rob Young
    As the Product Manager for the MySQL database it is always great to announce when the MySQL Engineering team delivers another great product release.  As a field DBA and developer it is even better when that release contains improvements and innovation that I know will help those currently using MySQL for apps that range from modest intranet sites to the most highly trafficked web sites on the web.  That said, it is my pleasure to take my hat off to MySQL Engineering for today's release of the MySQL 5.6.5 Development Milestone Release ("DMR"). The new highlighted features in MySQL 5.6.5 are discussed here: New Self-Healing Replication ClustersThe 5.6.5 DMR improves MySQL Replication by adding Global Transaction Ids and automated utilities for self-healing Replication clusters.  Prior to 5.6.5 this has been somewhat of a pain point for MySQL users with most developing custom solutions or looking to costly, complex third-party solutions for these capabilities.  With 5.6.5 these shackles are all but removed by a solution that is included with the GPL version of the database and supporting GPL tools.  You can learn all about the details of the great, problem solving Replication features in MySQL 5.6 in Mat Keep's Developer Zone article.  New Replication Administration and Failover UtilitiesAs mentioned above, the new Replication features, Global Transaction Ids specifically, are now supported by a set of automated GPL utilities that leverage the new GTIDs to provide administration and manual or auto failover to the most up to date slave (that is the default, but user configurable if needed) in the event of a master failure. The new utilities, along with links to Engineering related blogs, are discussed in detail in the DevZone Article noted above. Better Query Optimization and ThroughputThe MySQL Optimizer team continues to amaze with the latest round of improvements in 5.6.5. Along with much refactoring of the legacy code base, the Optimizer team has improved complex query optimization and throughput by adding these functional improvements: Subquery Optimizations - Subqueries are now included in the Optimizer path for runtime optimization.  Better throughput of nested queries enables application developers to simplify and consolidate multiple queries and result sets into a single unit or work. Optimizer now uses CURRENT_TIMESTAMP as default for DATETIME columns - For simplification, this eliminates the need for application developers to assign this value when a column of this type is blank by default. Optimizations for Range based queries - Optimizer now uses ready statistics vs Index based scans for queries with multiple range values. Optimizations for queries using filesort and ORDER BY.  Optimization criteria/decision on execution method is done now at optimization vs parsing stage. Print EXPLAIN in JSON format for hierarchical readability and Enterprise tool consumption. You can learn the details about these new features as well all of the Optimizer based improvements in MySQL 5.6 by following the Optimizer team blog. You can download and try the MySQL 5.6.5 DMR here. (look under "Development Releases")  Please let us know what you think!  The new HA utilities for Replication Administration and Failover are available as part of the MySQL Workbench Community Edition, which you can download here .Also New in MySQL LabsAs has become our tradition when announcing DMRs we also like to provide "Early Access" development features to the MySQL Community via the MySQL Labs.  Today is no exception as we are also releasing the following to Labs for you to download, try and let us know your thoughts on where we need to improve:InnoDB Online OperationsMySQL 5.6 now provides Online ADD Index, FK Drop and Online Column RENAME.  These operations are non-blocking and will continue to evolve in future DMRs.  You can learn the grainy details by following John Russell's blog.InnoDB data access via Memcached API ("NotOnlySQL") - Improved refresh of an earlier feature releaseSimilar to Cluster 7.2, MySQL 5.6 provides direct NotOnlySQL access to InnoDB data via the familiar Memcached API. This provides the ultimate in flexibility for developers who need fast, simple key/value access and complex query support commingled within their applications.Improved Transactional Performance, ScaleThe InnoDB Engineering team has once again under promised and over delivered in the area of improved performance and scale.  These improvements are also included in the aggregated Spring 2012 labs release:InnoDB CPU cache performance improvements for modern, multi-core/CPU systems show great promise with internal tests showing:    2x throughput improvement for read only activity 6x throughput improvement for SELECT range Read/Write benchmarks are in progress More details on the above are available here. You can download all of the above in an aggregated "InnoDB 2012 Spring Labs Release" binary from the MySQL Labs. You can also learn more about these improvements and about related fixes to mysys mutex and hash sort by checking out the InnoDB team blog.MySQL 5.6.5 is another installment in what we believe will be the best release of the MySQL database ever.  It also serves as a shining example of how the MySQL Engineering team at Oracle leads in MySQL innovation.You can get the overall Oracle message on the MySQL 5.6.5 DMR and Early Access labs features here. As always, thanks for your continued support of MySQL, the #1 open source database on the planet!

    Read the article

  • College Courses through distance learning

    - by Matt
    I realize this isn't really a programming question, but didn't really know where to post this in the stackexchange and because I am a computer science major i thought id ask here. This is pretty unique to the programmer community since my degree is about 95% programming. I have 1 semester left, but i work full time. I would like to finish up in December, but to make things easier i like to take online classes whenever I can. So, my question is does anyone know of any colleges that offer distance learning courses for computer science? I have been searching around and found a few potential classes, but not sure yet. I would like to gather some classes and see what i can get approval for. Class I need: Only need one C SC 437 Geometric Algorithms C SC 445 Algorithms C SC 473 Automata Only need one C SC 452 Operating Systems C SC 453 Compilers/Systems Software While i only need of each of the above courses i still need to take two more electives. These also have to be upper 400 level classes. So i can take multiple in each category. Some other classes I can take are: CSC 447 - Green Computing CSC 425 - Computer Networking CSC 460 - Database Design CSC 466 - Computer Security I hoping to take one or two of these courses over the summer. If not, then online over the regular semester would be ok too. Any help in helping find these classes would be awesome. Maybe you went to a college that offered distance learning. Some of these classes may be considered to be graduate courses too. Descriptions are listed below if you need. Thanks! Descriptions Computer Security This is an introductory course covering the fundamentals of computer security. In particular, the course will cover basic concepts of computer security such as threat models and security policies, and will show how these concepts apply to specific areas such as communication security, software security, operating systems security, network security, web security, and hardware-based security. Computer Networking Theory and practice of computer networks, emphasizing the principles underlying the design of network software and the role of the communications system in distributed computing. Topics include routing, flow and congestion control, end-to-end protocols, and multicast. Database Design Functions of a database system. Data modeling and logical database design. Query languages and query optimization. Efficient data storage and access. Database access through standalone and web applications. Green Computing This course covers fundamental principles of energy management faced by designers of hardware, operating systems, and data centers. We will explore basic energy management option in individual components such as CPUs, network interfaces, hard drives, memory. We will further present the energy management policies at the operating system level that consider performance vs. energy saving tradeoffs. Finally we will consider large scale data centers where energy management is done at multiple layers from individual components in the system to shutting down entries subset of machines. We will also discuss energy generation and delivery and well as cooling issues in large data centers. Compilers/Systems Software Basic concepts of compilation and related systems software. Topics include lexical analysis, parsing, semantic analysis, code generation; assemblers, loaders, linkers; debuggers. Operating Systems Concepts of modern operating systems; concurrent processes; process synchronization and communication; resource allocation; kernels; deadlock; memory management; file systems. Algorithms Introduction to the design and analysis of algorithms: basic analysis techniques (asymptotics, sums, recurrences); basic design techniques (divide and conquer, dynamic programming, greedy, amortization); acquiring an algorithm repertoire (sorting, median finding, strong components, spanning trees, shortest paths, maximum flow, string matching); and handling intractability (approximation algorithms, branch and bound). Automata Introduction to models of computation (finite automata, pushdown automata, Turing machines), representations of languages (regular expressions, context-free grammars), and the basic hierarchy of languages (regular, context-free, decidable, and undecidable languages). Geometric Algorithms The study of algorithms for geometric objects, using a computational geometry approach, with an emphasis on applications for graphics, VLSI, GIS, robotics, and sensor networks. Topics may include the representation and overlaying of maps, finding nearest neighbors, solving linear programming problems, and searching geometric databases.

    Read the article

  • Normal maps red in OpenGL?

    - by KaiserJohaan
    I am using Assimp to import 3d models, and FreeImage to parse textures. The problem I am having is that the normal maps are actually red rather than blue when I try to render them as normal diffuse textures. http://i42.tinypic.com/289ing3.png When I open the images in a image-viewing program they do indeed show up as blue. Heres when I create the texture; OpenGLTexture::OpenGLTexture(const std::vector<uint8_t>& textureData, uint32_t textureWidth, uint32_t textureHeight, TextureType textureType, Logger& logger) : mLogger(logger), mTextureID(gNextTextureID++), mTextureType(textureType) { glGenTextures(1, &mTexture); CHECK_GL_ERROR(mLogger); glBindTexture(GL_TEXTURE_2D, mTexture); CHECK_GL_ERROR(mLogger); glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, textureWidth, textureHeight, 0, glTextureFormat, GL_UNSIGNED_BYTE, &textureData[0]); CHECK_GL_ERROR(mLogger); glGenerateMipmap(GL_TEXTURE_2D); CHECK_GL_ERROR(mLogger); glBindTexture(GL_TEXTURE_2D, 0); CHECK_GL_ERROR(mLogger); } Here is my fragment shader. You can see I just commented out the normal-map parsing and treated the normal map texture as the diffuse texture to display it and illustrate the problem. As for the rest of the code it interacts as expected with the diffuse textures so I dont see a obvious problem there. "#version 330 \n \ \n \ layout(std140) uniform; \n \ \n \ const int MAX_LIGHTS = 8; \n \ \n \ struct Light \n \ { \n \ vec4 mLightColor; \n \ vec4 mLightPosition; \n \ vec4 mLightDirection; \n \ \n \ int mLightType; \n \ float mLightIntensity; \n \ float mLightRadius; \n \ float mMaxDistance; \n \ }; \n \ \n \ uniform UnifLighting \n \ { \n \ vec4 mGamma; \n \ vec3 mViewDirection; \n \ int mNumLights; \n \ \n \ Light mLights[MAX_LIGHTS]; \n \ } Lighting; \n \ \n \ uniform UnifMaterial \n \ { \n \ vec4 mDiffuseColor; \n \ vec4 mAmbientColor; \n \ vec4 mSpecularColor; \n \ vec4 mEmissiveColor; \n \ \n \ bool mHasDiffuseTexture; \n \ bool mHasNormalTexture; \n \ bool mLightingEnabled; \n \ float mSpecularShininess; \n \ } Material; \n \ \n \ uniform sampler2D unifDiffuseTexture; \n \ uniform sampler2D unifNormalTexture; \n \ \n \ in vec3 frag_position; \n \ in vec3 frag_normal; \n \ in vec2 frag_texcoord; \n \ in vec3 frag_tangent; \n \ in vec3 frag_bitangent; \n \ \n \ out vec4 finalColor; " " \n \ \n \ void CalcGaussianSpecular(in vec3 dirToLight, in vec3 normal, out float gaussianTerm) \n \ { \n \ vec3 viewDirection = normalize(Lighting.mViewDirection); \n \ vec3 halfAngle = normalize(dirToLight + viewDirection); \n \ \n \ float angleNormalHalf = acos(dot(halfAngle, normalize(normal))); \n \ float exponent = angleNormalHalf / Material.mSpecularShininess; \n \ exponent = -(exponent * exponent); \n \ \n \ gaussianTerm = exp(exponent); \n \ } \n \ \n \ vec4 CalculateLighting(in Light light, in vec4 diffuseTexture, in vec3 normal) \n \ { \n \ if (light.mLightType == 1) // point light \n \ { \n \ vec3 positionDiff = light.mLightPosition.xyz - frag_position; \n \ float dist = max(length(positionDiff) - light.mLightRadius, 0); \n \ \n \ float attenuation = 1 / ((dist/light.mLightRadius + 1) * (dist/light.mLightRadius + 1)); \n \ attenuation = max((attenuation - light.mMaxDistance) / (1 - light.mMaxDistance), 0); \n \ \n \ vec3 dirToLight = normalize(positionDiff); \n \ float angleNormal = clamp(dot(normalize(normal), dirToLight), 0, 1); \n \ \n \ float gaussianTerm = 0.0; \n \ if (angleNormal > 0.0) \n \ CalcGaussianSpecular(dirToLight, normal, gaussianTerm); \n \ \n \ return diffuseTexture * (attenuation * angleNormal * Material.mDiffuseColor * light.mLightIntensity * light.mLightColor) + \n \ (attenuation * gaussianTerm * Material.mSpecularColor * light.mLightIntensity * light.mLightColor); \n \ } \n \ else if (light.mLightType == 2) // directional light \n \ { \n \ vec3 dirToLight = normalize(light.mLightDirection.xyz); \n \ float angleNormal = clamp(dot(normalize(normal), dirToLight), 0, 1); \n \ \n \ float gaussianTerm = 0.0; \n \ if (angleNormal > 0.0) \n \ CalcGaussianSpecular(dirToLight, normal, gaussianTerm); \n \ \n \ return diffuseTexture * (angleNormal * Material.mDiffuseColor * light.mLightIntensity * light.mLightColor) + \n \ (gaussianTerm * Material.mSpecularColor * light.mLightIntensity * light.mLightColor); \n \ } \n \ else if (light.mLightType == 4) // ambient light \n \ return diffuseTexture * Material.mAmbientColor * light.mLightIntensity * light.mLightColor; \n \ else \n \ return vec4(0.0); \n \ } \n \ \n \ void main() \n \ { \n \ vec4 diffuseTexture = vec4(1.0); \n \ if (Material.mHasDiffuseTexture) \n \ diffuseTexture = texture(unifDiffuseTexture, frag_texcoord); \n \ \n \ vec3 normal = frag_normal; \n \ if (Material.mHasNormalTexture) \n \ { \n \ diffuseTexture = vec4(normalize(texture(unifNormalTexture, frag_texcoord).xyz * 2.0 - 1.0), 1.0); \n \ // vec3 normalTangentSpace = normalize(texture(unifNormalTexture, frag_texcoord).xyz * 2.0 - 1.0); \n \ //mat3 tangentToWorldSpace = mat3(normalize(frag_tangent), normalize(frag_bitangent), normalize(frag_normal)); \n \ \n \ // normal = tangentToWorldSpace * normalTangentSpace; \n \ } \n \ \n \ if (Material.mLightingEnabled) \n \ { \n \ vec4 accumLighting = vec4(0.0); \n \ \n \ for (int lightIndex = 0; lightIndex < Lighting.mNumLights; lightIndex++) \n \ accumLighting += Material.mEmissiveColor * diffuseTexture + \n \ CalculateLighting(Lighting.mLights[lightIndex], diffuseTexture, normal); \n \ \n \ finalColor = pow(accumLighting, Lighting.mGamma); \n \ } \n \ else { \n \ finalColor = pow(diffuseTexture, Lighting.mGamma); \n \ } \n \ } \n"; Why is this? does normal-map textures need some sort of special treatment in opengl?

    Read the article

  • Beginning with first project on game development [closed]

    - by Tsvetan
    Today is the day I am going to start my first real game project. It will be a Universe simulator. Basically, you can build anything from tiny meteor to quazars and universes. It is going to be my project for an olympiad in IT in my country and I really want to make it perfect(at least a bronze medal). So, I would like to ask some questions about organization and development methodologies. Firstly, my plan is to make a time schedule. In it I would write my plans for the next month or two(because that is the time I have). With this exact plan I hope to make my organisation at its best. Of course, if I am doing sth faster than the schedule I would involve more features for the game and/or continue with the tempo I have. Also, for the organisation I would make a basic pseudocode(maybe) and just rewrite it so it is compilable. Like a basic skeleton of everything. The last is an idea I tought of in the moment, but if it is good I will use it. Secondly, for the development methodologies, obviously, I think of making object-oriented code and make everything perfect(a lot of testing, good code, documentation etc.). Also, I am going to make my own menu system(I read that OpenGL hasn't got very good one). Maybe I would implement it with an xml file, holding the info about position of buttons, text boxes, images and everything. Maybe I would do a specific CSS for it and so on. I think that is very good way of doing the menu system, because it makes the presentation layer separate of the logic. But, if there is a better way, I would do it the better way. For the logic, well, I don't have much to say. OO code, testing, debuging, good and fast algorithms and so on. Also, a good documentation must be written and this is the area I need to make some research in. I think that is for now. I hope I have been enough descriptive. If more questions come on my mind, I will ask them. Edit: I think of blogging every part of the project, or at least writing down everything in a file or something like that. My question is: Is my plan of how to do everything around the project good? And if not, what is necessary to be improved and what other things I can involve for making the project good.

    Read the article

  • What is a resonable workflow for designing webapps?

    - by Evan Plaice
    It has been a while since I have done any substantial web development and I'd like to take advantage of the latest practices but I'm struggling to visualize the workflow to incorporate everything. Here's what I'm looking to use: CakePHP framework jsmin (JavaScript Minify) SASS (Synctactically Awesome StyleSheets) Git CakePHP: Pretty self explanatory, make modifications and update the source. jsmin: When you modify a script, do you manually run jsmin to output the new minified code, or would it be better to run a pre-commit hook that automatically generates jsmin outputs of javascript files that have changed. Assume that I have no knowledge of implementing commit hooks. SASS: I really like what SASS has to offer but I'm also aware that SASS code isn't supported by browsers by default so, at some point, the SASS code needs to be transformed to normal CSS. At what point in the workflow is this done. Git I'm terrified to admit it but, the last time I did any substantial web development, I didn't use SCM source control (IE, I did use source control but it consisted of a very detailed change log with backups). I have since had plenty of experience using Git (as well as mercurial and SVN) for desktop development but I'm wondering how to best implement it for web development). Is it common practice to implement a remote repository on the web host so I can push the changes directly to the production server, or is there some cross platform (windows/linux) tool that makes it easy to upload only changed files to the production server. Are there web hosting companies that make it eas to implement a remote repository, do I need SSH access, etc... I know how to accomplish this on my own testing server with a remote repository with a separate remote tracking branch already but I've never done it on a remote production web hosting server before so I'm not aware of the options yet. Extra: I was considering implementing a javascript framework where separate javascript files used on a page are compiled into a single file for each page on the production server to limit the number of file downloads needed per page. Does something like this already exist? Is there already an open source project out in the wild that implements something similar that I could use and contribute to? Considering how paranoid web devs are about performance (and the fact that the number of file requests on a website is a big hit to performance) I'm guessing that there is some wizard hacker on the net who has already addressed this issue.

    Read the article

  • Design review for application facing memory issues

    - by Mr Moose
    I apologise in advance for the length of this post, but I want to paint an accurate picture of the problems my app is facing and then pose some questions below; I am trying to address some self inflicted design pain that is now leading to my application crashing due to out of memory errors. An abridged description of the problem domain is as follows; The application takes in a “dataset” that consists of numerous text files containing related data An individual text file within the dataset usually contains approx 20 “headers” that contain metadata about the data it contains. It also contains a large tab delimited section containing data that is related to data in one of the other text files contained within the dataset. The number of columns per file is very variable from 2 to 256+ columns. The original application was written to allow users to load a dataset, map certain columns of each of the files which basically indicating key information on the files to show how they are related as well as identify a few expected column names. Once this is done, a validation process takes place to enforce various rules and ensure that all the relationships between the files are valid. Once that is done, the data is imported into a SQL Server database. The database design is an EAV (Entity-Attribute-Value) model used to cater for the variable columns per file. I know EAV has its detractors, but in this case, I feel it was a reasonable choice given the disparate data and variable number of columns submitted in each dataset. The memory problem Given the fact the combined size of all text files was at most about 5 megs, and in an effort to reduce the database transaction time, it was decided to read ALL the data from files into memory and then perform the following; perform all the validation whilst the data was in memory relate it using an object model Start DB transaction and write the key columns row by row, noting the Id of the written row (all tables in the database utilise identity columns), then the Id of the newly written row is applied to all related data Once all related data had been updated with the key information to which it relates, these records are written using SqlBulkCopy. Due to our EAV model, we essentially have; x columns by y rows to write, where x can by 256+ and rows are often into the tens of thousands. Once all the data is written without error (can take several minutes for large datasets), Commit the transaction. The problem now comes from the fact we are now receiving individual files containing over 30 megs of data. In a dataset, we can receive any number of files. We’ve started seen datasets of around 100 megs coming in and I expect it is only going to get bigger from here on in. With files of this size, data can’t even be read into memory without the app falling over, let alone be validated and imported. I anticipate having to modify large chunks of the code to allow validation to occur by parsing files line by line and am not exactly decided on how to handle the import and transactions. Potential improvements I’ve wondered about using GUIDs to relate the data rather than relying on identity fields. This would allow data to be related prior to writing to the database. This would certainly increase the storage required though. Especially in an EAV design. Would you think this is a reasonable thing to try, or do I simply persist with identity fields (natural keys can’t be trusted to be unique across all submitters). Use of staging tables to get data into the database and only performing the transaction to copy data from staging area to actual destination tables. Questions For systems like this that import large quantities of data, how to you go about keeping transactions small. I’ve kept them as small as possible in the current design, but they are still active for several minutes and write hundreds of thousands of records in one transaction. Is there a better solution? The tab delimited data section is read into a DataTable to be viewed in a grid. I don’t need the full functionality of a DataTable, so I suspect it is overkill. Is there anyway to turn off various features of DataTables to make them more lightweight? Are there any other obvious things you would do in this situation to minimise the memory footprint of the application described above? Thanks for your kind attention.

    Read the article

  • Tic Tac Toe Winner in Javascript and html [closed]

    - by Yehuda G
    I am writing a tic tac toe game using html, css, and JavaScript. I have my JavaScript in an external .js file being referenced into the .html file. Within the .js file, I have a function called playerMove, which allows the player to make his/her move and switches between player 'x' and 'o'. What I am trying to do is determine the winner. Here is what I have: each square, when onclick(this), references playerMove(piece). After each move is made, I want to run an if statement to check for the winner, but am unsure if the parameters would include a reference to 'piece' or a,b, and c. Any suggestions would be greatly appreciated. Javascript: var turn = 0; a = document.getElementById("topLeftSquare").innerHTML; b = document.getElementById("topMiddleSquare").innerHTML; c = document.getElementById("topRightSquare").innerHTML; function playerMove(piece) { var win; if(piece.innerHTML != 'X' && piece.innerHTML != 'O'){ if(turn % 2 == 0){ document.getElementById('playerDisplay').innerHTML= "X Plays " + printEquation(1); piece.innerHTML = 'X'; window.setInterval("X", 10000) piece.style.color = "red"; if(piece.innerHTML == 'X') window.alert("X WINS!"); } else { document.getElementById('playerDisplay').innerHTML= "O Plays " + printEquation(1); piece.innerHTML = 'O'; piece.style.color = "brown"; } turn+=1; } html: <div id="board"> <div class="topLeftSquare" onclick="playerMove(this)"> </div> <div class="topMiddleSquare" onclick="playerMove(this)"> </div> <div class="topRightSquare" onclick="playerMove(this)"> </div> <div class="middleLeftSquare" onclick="playerMove(this)"> </div> <div class="middleSquare" onclick="playerMove(this)"> </div> <div class="middleRightSquare" onclick="playerMove(this)"> </div> <div class="bottomLeftSquare" onclick="playerMove(this)"> </div> <div class="bottomMiddleSquare" onclick="playerMove(this)"> </div> <div class="bottomRightSquare" onclick="playerMove(this)"> </div> </div>

    Read the article

< Previous Page | 501 502 503 504 505 506 507 508 509 510 511 512  | Next Page >