Search Results

Search found 15605 results on 625 pages for 'cached exchange mode'.

Page 507/625 | < Previous Page | 503 504 505 506 507 508 509 510 511 512 513 514  | Next Page >

• Configuring https access on HP A5120 Switch

  - by GerryEgan

  I am trying to configure HTTPS management on a HP a5120 switch running Version 5.20.99, Release 2215 and not having much luck. I have followed the manual by creating an SSL policy first and then enabling the HTTPS server with the SSL policy: ssl server-policy sslpol ip https ssl-server-policy sslpol ip https enable When I try and log onto the switch with Google Chrome I get the following error: Error 107 (net::ERR_SSL_PROTOCOL_ERROR): SSL protocol error. When I look this up I have found references to errors due to TLS being used in SSL. I can find no way to specify the SSL version in the server policy. The manual has a configuration example that uses MSCEP to retrieve a certificate but in Windows 2008 R2 that feature is only available in Enterprise and Datacentre editions which I don't have. I have SSH configured and it is using a locally generated certificate so I'm not sure if I can use that but I'd like to if possible. Has anybody been able to setup HTTPS management on HP A series switches without MSCEP? Any and all help appreciated! here is a copy of my config with the interfaces removed: version 5.20.99, Release 2215 # sysname MYSYSNAME # irf domain 10 irf mac-address persistent timer irf auto-update enable undo irf link-delay # domain default enable system # telnet server enable # vlan 1 # vlan 100 description Management # radius scheme system primary authentication 127.0.0.1 1645 primary accounting 127.0.0.1 1646 user-name-format without-domain # domain system access-limit disable state active idle-cut disable self-service-url disable # user-group system group-attribute allow-guest # local-user admin password cipher authorization-attribute level 3 service-type ssh telnet terminal service-type web # stp enable # ssl server-policy sslpol pki-domain MYDOMAIN # interface NULL0 # interface Vlan-interface199 ip address 192.168.199.140 255.255.255.0 # interface GigabitEthernet1/0/1 poe enable stp edged-port enable # interface Ten-GigabitEthernet2/1/2 # dhcp-snooping # ntp-service unicast-server 192.168.1.71 # ssh server enable # ip https ssl-server-policy sslpol ip https enable # load xml-configuration # user-interface aux 0 1 user-interface vty 0 15 authentication-mode scheme

  Read the article

• Why is OpenSSH not using the user specified in ssh_config?

  - by Jordan Evens

  I'm using OpenSSH from a Windows machine to connect to a Linux Mint 9 box. My Windows user name doesn't match the ssh target's user name, so I'm trying to specify the user to use for login using ssh_config. I know OpenSSH can see the ssh_config file since I'm specifying the identify file in it. The section specific to the host in ssh_config is: Host hostname HostName hostname IdentityFile ~/.ssh/id_dsa User username Compression yes If I do ssh username@hostname it works. Trying using ssh_config only gives: F:\>ssh -v hostname OpenSSH_5.6p1, OpenSSL 0.9.8o 01 Jun 2010 debug1: Connecting to hostname [XX.XX.XX.XX] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug1: identity file /cygdrive/f/progs/OpenSSH/home/.ssh/id_rsa type -1 debug1: identity file /cygdrive/f/progs/OpenSSH/home/.ssh/id_rsa-cert type -1 debug1: identity file /cygdrive/f/progs/OpenSSH/home/.ssh/id_dsa type 2 debug1: identity file /cygdrive/f/progs/OpenSSH/home/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3p1 Debia n-3ubuntu5 debug1: match: OpenSSH_5.3p1 Debian-3ubuntu5 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.6 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'hostname' is known and matches the RSA host key. debug1: Found key in /cygdrive/f/progs/OpenSSH/home/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Trying private key: /cygdrive/f/progs/OpenSSH/home/.ssh/id_rsa debug1: Offering DSA public key: /cygdrive/f/progs/OpenSSH/home/.ssh/id_dsa debug1: Authentications that can continue: publickey debug1: No more authentication methods to try. Permission denied (publickey). I was under the impression that (as outlined in this question: How to make ssh log in as the right user?) specifying User username in ssh_config should work. Why isn't OpenSSH using the username specified in ssh_config?

  Read the article

• Get Illegal Instruction error when booting Linux in VirtualBox, works fine when booted directly

  - by rkjnsn

  I have a computer on which I am dual booting Windows 7 and Gentoo Linux (both 64-bit). I want to be able to load up my Linux installation in a VM while I am booted into Windows. I have installed VirtualBox and followed the instructions for creating a raw disk VMDK. When I start the VM, Linux starts booting, but then fails with the following error when unlocking my root partition: truecrypt[441] trap invalid opcode ip:373615538e0 sp:3dd0e0dfb60 error:0 in libpixman-1.so.0[373614d6000+8d000] Everything works fine when I boot into Linux directly. What could cause an illegal instruction to be hit in libpixman only when booting in VirtualBox? Update: As a troubleshooting step, I recompiled pixman without "-march", and no longer get an illegal instruction error in that library. (The boot fails in the same spot with the same error in a different library, however.) How can I determine the specific opcode that isn't working in VirtualBox so I can disable it in my CFLAGS without having to disable all CPU-specific optimizations? I am still confused as to why there would be any user-mode instruction that would fail to work in a VM. Is this a known limitation? My CPU is an Intel Core i7 3720QM, and I have hardware virtualization support enabled.

  Read the article

• Blinking power button

  - by Mike Ramsey

  A friend asked me to look at his Gateway DX4640 desktop. When he presses the power button, power goes to the mobo (NVIDIA nForce 630i MCP73PV, GeForce 7100 chipset) and the CPU fan starts spinning. The power button slowely blinks on and off (blue) and the screen briefly says no signal and then goes black. And nothing else; no post code beeps. My initial two conjectures were: 1. Vista was stuck in sleep/hibernation mode, or 2. A power off had left the mobo in a bad state. The fix for both is to: a) Unplug the AC power cord b) hold the power button for 30 second to fully discharge the mobo It didn't help. I left the system unplugged from AC power for an hour. No change. I am out of ideas. Has anybody seen anything like this before? What does a blinking blue power button mean? How can I get more data points to guide trouble shooting? --Thank you, --Mike

  Read the article

• Enabling hardware acceleration and Xinerama for multi-monitor/multi-GPU in Linux

  - by mynameiscoffey

  My current setup is three monitors connected as follows (monitors listed from left to right): GPU0 (nVidia GTX 280): - Dell 2405FPW (1920x1200) - Dell U2410 (1920x1200) GPU1 (nVidia 210): - Dell 2405FPW (1920x1200) Works like a charm in Windows 7, not so much in Linux. I seem to only have three real options: Run all three monitors as a seperate X screen, I get hardware acceleration but as they are all independent X sessions I cannot move windows between them and can only have firefox open on one at any given time. Run the two on GPU0 in TwinView mode and have GPU1 as a seperate X screen. Same limitation as 1 but at least two monitors work together ok. I did have an issue where occasionally Linux saw both monitors on GPU0 as a single large monitor however. Enable Xinerama and have everything work as I want it to but hardware acceleration is gone and the display is Windows 95 style choppy. My ideal solution would be to have all screens working as they do under Xinerama without the limitation of having hardware acceleration disabled. I don't even care if that means rendering all three on GPU0 and somehow farming out the display of the third monitor to GPU1, whatever works. My question is this: is there any way to accomplish this? I don't feel like my use case is so out there that there shouldn't be at least some form of support (beyond the three limited options presented above), or is my best option going to be to just suck it up and pick up a better card to replace both that can handle three outputs by itself?

  Read the article

• Error when starting .Net-Application from ThinApp-Application

  - by user50209

  one of our customers uses SAP through VMWare ThinApp. In SAP there is a button that launches an .Net application from a server. When starting the .Net-application directly, there is no error. If the user tries to start the application by clicking the button in the ThinApp-Application, it displays the following errors: Microsoft Visual C++ Runtime Library R6034 An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information. After clicking "OK" it displays: Microsoft Visual C++ Runtime Library Runtime Error! R6030 - CRT not initialized So, does the customer have to install some components into his ThinApp (if yes, which?) to get things working? Regards, inno ----- [EDIT] ----- @Sean: It's installed the following way: The .exe of the .Net-Application is on a mapped drive on a server. All clients have the requirements installed (.Net-framework for example) and start the .exe from the mapped drive. The ThinApp-Application tries to start this application and throws the mentioned exceptions. AFAIK there are no entry points for this application configured. What I should also mention is: The .Net-Application crashes during execution. That means, we have a debug mode implemented that shows what the application is doing. The application shows what it's doing and after some steps it crashes. The interesting point is: It's a .Net-application, not a C++ Application.

  Read the article

• How do I use a Minitel terminal as a linux dumb terminal

  - by Pawz

  I recently purchased a US version of the Alcatel Minitel terminal. I think it's a 1B version. Pictures of it here: I tried connecting a null modem to the 25 pin port on the back and plugging it into a linux box running agetty but I couldn't get it to show any signs of being connected. I used Google Translate to translate this document into English: http://mirabellug.org/wikini/upload/Documentations_minitel.pdf As far as I can tell, you take it out of videotex mode by typing Fcnt-T A, then turn off local echo with Fcnt-T E, then set it to 4800 baud with Fcnt-P 4. I presume Fcnt refers to the "CTRL" key on my terminal. But I think I'm doing something wrong, because it doesn't look like it's recognising the keystrokes, because "Fcnt-T A" just prints the letter A to the screen, which is not what you'd expect a function key combo to do. Has anyone used these minitel terminals as a linux terminal, and if so, please can you share how to configure the minitel to run as a terminal ? Is the 25 pin plug even the correct port to use ? I read something online that indicated you're supposed to use the 5 pin DIN plug instead, is that right ? If so, what's the 25 pin plug for ? If I am supposed to use the DIN plug, does anyone know the pinouts so I can make a cable ?

  Read the article

• Wget save cookies not working

  - by TrymBeast

  I've been trying to login in the pyload through the web api, but wget is not saving the cookies and I don't understand why. I'm using the following command: wget --delete-after --keep-session-cookies --save-cookies=my_cookies.txt --post-data="username=USERNAME&password=PASSWORD" http://localhost:8000/api/login But the content of my_cookies.txt is: # HTTP cookie file. # Generated by Wget on 2012-06-23 22:31:33. # Edit at your own risk. When I run the same command but in debug mode I get the following output that includes the set cookie in the header response: DEBUG output created by Wget 1.10.2 (Red Hat modified) on linux-gnueabi. --22:31:11-- http://localhost:8000/api/login Resolving localhost... 127.0.0.1 Caching localhost => 127.0.0.1 Connecting to localhost|127.0.0.1|:8000... connected. Created socket 3. Releasing 0x000504d0 (new refcount 1). ---request begin--- POST /api/login HTTP/1.0 User-Agent: Wget/1.10.2 (Red Hat modified) Accept: */* Host: localhost:8000 Connection: Keep-Alive Content-Type: application/x-www-form-urlencoded Content-Length: 32 ---request end--- [POST data: username=USERNAME&password=PASSWORD] HTTP request sent, awaiting response... ---response begin--- HTTP/1.1 200 OK Content-Length: 34 Content-Type: application/json Cache-Control: no-cache, must-revalidate Set-cookie: beaker.session.id=405390ddc809efed54820638c95d7997; expires=Tue, 19-Jan-2038 04:14:07 GMT; Path=/ Connection: Keep-Alive Date: Sat, 23 Jun 2012 21:31:11 GMT Server: CherryPy/3.1.2 WSGI Server ---response end--- 200 OK hs->local_file is: login (not existing) Registered socket 3 for persistent reuse. TEXTHTML is on. Length: 34 [application/json] Saving to: `login' 100%[=======================================>] 34 --.-K/s in 0s 22:31:11 (1.28 MB/s) - `login' saved [34/34] Removing file due to --delete-after in main(): Removing login. Saving cookies to my_cookies.txt. Done saving cookies. Can anyone tell me what am I doing wrong? Thanks in advance!

  Read the article

• Regular Windows 7 BSOD with Shrew VPN client

  - by Junto

  The Shrew VPN client appears to be a good alternative to the Cisco VPN Client on x64 Windows 7. However, since installing it I've seen fairly regular BSODs. Minidump attached: Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [D:\Temp\020810-23431-01.dmp] Mini Kernel Dump File: Only registers and stack trace are available Symbol search path is: SRV*d:\symbols*http://msdl.microsoft.com/download/symbols Executable search path is: Windows 7 Kernel Version 7600 MP (8 procs) Free x64 Product: WinNt, suite: TerminalServer SingleUserTS Built by: 7600.16385.amd64fre.win7_rtm.090713-1255 Machine Name: Kernel base = 0xfffff800`0285f000 PsLoadedModuleList = 0xfffff800`02a9ce50 Debug session time: Mon Feb 8 18:08:12.887 2010 (GMT+1) System Uptime: 0 days 7:52:06.120 Loading Kernel Symbols ............................................................... ................................................................ .............. Loading User Symbols Loading unloaded module list .... ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck A, {0, 2, 0, fffff800028d50b6} Unable to load image \SystemRoot\system32\DRIVERS\vfilter.sys, Win32 error 0n2 *** WARNING: Unable to verify timestamp for vfilter.sys *** ERROR: Module load completed but symbols could not be loaded for vfilter.sys Probably caused by : vfilter.sys ( vfilter+29a6 ) Followup: MachineOwner Machine is a brand spanking new Dell Precision T5500. Superuser appears to have several recommendations for the Shrew VPN Client as an alternative to the Cisco VPN client on 64 bit machines, so I wondered if anyone here has seen this problem and possibly found a solution to the problem? I've decided to run the VPN client under Windows 7 compatibility mode for the moment (Vista SP2) with administrator privileges to see if it makes a difference. Oddly, the VPN doesn't necessarily need to be connected. I've noticed it when browsing using Google Chrome and Internet Explorer, usually when I open up a new tab. If it carries on I think I'll be forced to shell out the 120 EUR for the NCP Client instead.

  Read the article

• Windows 7, network shares, and authentication via local group instead of local user

  - by Donovan

  I have been doing some troubleshooting of my home network lately and have come to an odd conclusion that I was hoping to get some clarification on. I'm used to managing share permissions in a domain environment via groups instead of individual user accounts. I have a box at home running windows 7 ultimate and I decided to share some directories on that machine. I set it up to disallow guest access and require specifically granted permissions. (password moe?). Anyway, after a whole bunch of time i figured out that even though the shares I created were allowed via a local group i could not access them until i gave specific allowance to the intended user. I just didn't think i would have to do that. So here is the breakdown. Network is windows workgroup, not homegroup or nt domain PC_1 - win 7 ultimate - sharing in classic mode - user BOB - groups Admins PC_2 - win 7 starter - client - user BOB - groups admins PC_3 - win xp pro - client - user BOB - groups admins the share on PC_1 granted permission to only the local group administrators. local user BOB on PC_1 was a member of administrators. Both PC_2 and PC_3 could not browse the intended share on PC_1 because they were denied access. Also, no challenge was presented. They were simply denied. After adding BOB specifically to the intended share everything works just fine. Remember, its not an nt domain just a workgroup. But still, shouldn't i be able to manage share permissions via groups instead of individual user accounts? D.

  Read the article

• How do I keep my Mac from constantly going to sleep?

  - by David

  The system is a PowerPC Mac Mini running MacOS Tiger 10.4.11. When I login (I'm the admin), everything seems fine - until about 10-15 minutes later. Then the system goes into sleep mode. Each time I try to wake the system up - I can barely log in before it goes to sleep again. Sometimes I don't have enough time to enter my password (from the screen saver). If I shut down and restart, then I have that 10-15 mins again - until it again goes to sleep. I checked the settings in the Displays and Energy System Prefs. I looked at Accounts and at Screen Saver System Prefs; no times seemed to be present. I've already reset the PROM and other things (as part of an earlier problem shooting session). If I don't log in at the desktop, things seem to be fine. Nothing in .profile, /etc/profile, or /etc/bashrc seems to stand out. Right now, the system is hardly usable; can someone help? Many thanks...

  Read the article

• How do I keep my Mac from constantly going to sleep?

  - by David

  The system is a PowerPC Mac Mini running MacOS Tiger 10.4.11. When I login (I'm the admin), everything seems fine - until about 10-15 minutes later. Then the system goes into sleep mode. Each time I try to wake the system up - I can barely log in before it goes to sleep again. Sometimes I don't have enough time to enter my password (from the screen saver). If I shut down and restart, then I have that 10-15 mins again - until it again goes to sleep. I checked the settings in the Displays and Energy System Prefs. I looked at Accounts and at Screen Saver System Prefs; no times seemed to be present. I've already reset the PROM and other things (as part of an earlier problem shooting session). If I don't log in at the desktop, things seem to be fine. Nothing in .profile, /etc/profile, or /etc/bashrc seems to stand out. Right now, the system is hardly usable; can someone help? Many thanks...

  Read the article

• FreeBSD ZFS RAID-Z2 performance issues

  - by Axel Gneiting

  I'm trying to build my own network attached storage based on FreeBSD+ZFS+standard components, but there are strange performance issues. The hardware specs are: AMD Athlon II X2 240e processor ASUS M4A78LT-M LE mainboard 2GiB Kingston ECC DDR3 (two sticks) Intel Pro/1000 CT PCIe network adapter 5x Western Digital Caviar Green 1.5TB I created a RAID-Z2 zpool from all disks. I installed FreeBSD 8.1 on that zpool following the tutorial. The SATA controllers are running in AHCI mode. Output of zpool status: pool: zroot state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM zroot ONLINE 0 0 0 raidz2 ONLINE 0 0 0 gptid/7ef815fc-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 gptid/80344432-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 gptid/81741ad9-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 gptid/824af5cb-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 gptid/82f98a65-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 The problem is that write performance on the pool is very very bad (<10 MB/s) and every application that is accessing the disk is unresponsive every few seconds when writing. It seems like writing is fine until the ZFS ark cache is full and then ZFS stalls the entire system I/O till it's finished writing that data. Also I'm getting kmem_malloc to small kernel panics. I've already tried to put vm.kmem_size="1500M" vm.kmem_size_max="1500M" into /boot/loader.conf, but it doesn't help. Does anyone know what's going on here? Am I really not having enough memory for ZFS to handle this RAID-Z2?

  Read the article

• Software mirroring (RAID1) versus "Fake Raid" for new Windows 7 install

  - by kquinn

  I've just ordered two new hard drives for my main desktop and a copy of Windows 7 Professional 64-bit. I'd like to do a clean install of Win7 onto the new drives (leaving my old XP Pro boot partition around for a while in case something goes disastrously wrong, etc.). I want to have them set up in mirrored (RAID-1) mode. My understanding is that Win7 Pro can do software mirroring, but can I set this up directly at install time? If so, how? Note that I'd like the disk to be split into three partitions (OS/Apps&Data/Bulk data), all of which should be mirrored. Would it be better (more reliable or faster) to use my motherboard's hardware RAID support? My motherboard is an older nVidia nForce 680i SLI, which is not the most stable of motherboards, and I'm not sure how trustworthy its RAID1 configuration might be (or if Win7 could even detect and install onto a hardware-mirrored volume). Also, the performance characteristics of RAID1 are rather different than RAID0 or RAID5, and I'm wondering if Win7's software mirroring might actually be faster than hardware RAID1 (for example, I'm more of a Unix admin when I have to wear the sysadmin hat, and I've had great success deploying ZFS; most hardware RAID1 implementations have to read both disks and compare results to look for data errors, but ZFS can read from only one disk in the mirror and just use the built-in checksum, meaning it can have up to 2x the number of reads in-flight, as long as there's no data corruption). Edit: Okay, my question about whether Windows 7 can do software mirroring has been answered, and it can. I'm still unsure whether Windows software RAID or my motherboard's hardware "fake RAID" function is a better choice, though. Remember, I'm only interested in mirroring -- not the more complicated striping or parity operations that generally show the poor performance of crappy motherboard RAID solutions.

  Read the article

• During Vista Repair - No operating system is listed.

  - by Jack Marchetti

  After a Windows update, my brother's Gateway computer loads to the "Step 3 of 3: 0%" and reboots. Safe Mode does not work. I placed a Vista DVD in the drive, and re-booted. (Note, this is my Vista DVD, not the Recovery/System disc that would come with a computer. Gateway does not give you CD's anymore. I believe they store recovery on a partition, but that partition has been wiped out). I chose "Repair Your Computer" I get a dialog box, but no operating system is listed. I'm then prompted to "Load Drivers". What drivers am I supposed to be loading here and where from? I placed a CD in the drive to "load drivers" but I don't see my DVD drive listed. All I saw where X:/Sources along with several Removable Media slots that were empty. On another screen I tried Startup Repair, which didn't do anything. I attempted to use System Restore - but it doesn't detect the hard drive. I'm guessing that I'm missing some sort of SATA driver and that is why the hard disk is not being found. Any ideas on this?

  Read the article

• CPU / Affinity mask problem in SQL 2005

  - by Robert Moir

  Hi folks, Having a problem with a SQL Server which was virtualised. The CPU mask was set on the physical host for some reason and now advanced options are not available. So I need to reconfigure the CPU affinity mask settings - which are advanced options, so this is blocked because of the affinity mask issue. I've tried doing this from the SQL server in single user command line mode, I've googled and found lots of people with similar problems but no real solution. I'm stumped. Any ideas? Sample commands and output from query analyser below. sp_configure 'show advanced options', 1 GO RECONFIGURE WITH OVERRIDE GO sp_configure 'affinity mask', 0x00000000 GO RECONFIGURE GO ----------------------------------------- Configuration option 'show advanced options' changed from 0 to 1. Run the RECONFIGURE statement to install. Msg 5832, Level 16, State 1, Line 1 The affinity mask specified does not match the CPU mask on this system. Msg 15123, Level 16, State 1, Procedure sp_configure, Line 51 The configuration option 'affinity mask' does not exist, or it may be an advanced option.

  Read the article

• Acer LCD says "no signal"

  - by Ken

  I have an Acer 24" LCD (model "AL2423WDR") that's about 3 years old. It worked perfectly for most of its lifetime so far. Recently it started giving problems. When I turn it on, it either says "no signal" on the display, or the power light goes yellow (as if in power-saving mode). This happens with both DVI and VGA (both of which worked fine before), and stranger still, the 4 buttons on the front, for accessing the on-screen menus, don't do anything. I've also tried different computer hardware and software (PC/Mac, Linux/MacOS), but nothing has worked. I've tried power-cycling it (with both the power button and the power switch), and also unplugging it entirely. The nonworking buttons suggest to me an issue with the firmware. I found a place on Acer's website that says I can send it in to have it fixed, at my expense, but I'll avoid that if I can. Is there a way to fully reset it manually? Or is there something else I can try?

  Read the article

• Xinerama creates a panning viewport

  - by iblue

  EDIT: I've created a bug report: https://bugs.freedesktop.org/show_bug.cgi?id=48458 My Setup I have 4 monitors, 1920x1080, which are in portrait mode (rotated left). They are connected to two radeon graphic cards. As usual, a picture says more than a thousand words. The problem Everything works fine, when Xinerama is disabled. But when I enable Xinerama, things get weird. When I move the mouse of the screen and return, the screen contents begin to move with the mouse, only on this monitor. It seems like the virtual display size does not match the real screen size, which activates a panning viewport. Any idea how to stop this? The video I created a video to demonstrate the issue: http://www.youtube.com/watch?v=zq_XHji1P24 xorg.conf This is my xorg.conf: Section "ServerLayout" ##################[ Evilness begins here ]############# Option "Xinerama" "on" # <--- Makes it go b0rked! ##################[ End of all evil ]############# Identifier "BOFH Console of Doom" Screen 0 "Screen-0" 0 0 Screen 1 "Screen-1" RightOf "Screen-0" Screen 2 "Screen-2" RightOf "Screen-1" Screen 3 "Screen-3" RightOf "Screen-2" EndSection Section "ServerFlags" Option "RandR" "false" EndSection Section "Module" Load "dbe" Load "dri" Load "extmod" Load "dri2" Load "record" Load "glx" EndSection Section "Monitor" Identifier "Monitor-0" Option "Rotate" "left" EndSection Section "Monitor" Identifier "Monitor-1" Option "Rotate" "left" EndSection Section "Monitor" Identifier "Monitor-2" Option "Rotate" "left" EndSection Section "Monitor" Identifier "Monitor-3" Option "Rotate" "left" EndSection Section "Device" Identifier "Radeon-0-0" Driver "radeon" BusID "PCI:9:0:0" Option "ZaphodHeads" "DVI-0" Screen 0 EndSection Section "Device" Identifier "Radeon-0-1" Driver "radeon" BusID "PCI:9:0:0" Option "ZaphodHeads" "DVI-1" Screen 1 EndSection Section "Device" Identifier "Radeon-1-0" Driver "radeon" BusID "PCI:4:0:0" Option "ZaphodHeads" "DVI-2" Screen 0 EndSection Section "Device" Identifier "Radeon-1-1" Driver "radeon" BusID "PCI:4:0:0" Option "ZaphodHeads" "DVI-3" Screen 1 EndSection Section "Screen" Identifier "Screen-0" Device "Radeon-0-0" Monitor "Monitor-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen-1" Device "Radeon-0-1" Monitor "Monitor-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen-2" Device "Radeon-1-0" Monitor "Monitor-2" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen-3" Device "Radeon-1-1" Monitor "Monitor-3" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• Debian - starting UFW (Uncomplicated Firewall) before network interfaces are operational

  - by Tomasz Zielinski

  I want to install UFW on Debian Lenny. Everything looks straightforward except that I don't know where to plug UFW startup script so that it configures iptables before hax0rs can break in. I've reviewed runlevel directories and in /etc/rc0.d, /etc/rc6.d and /etc/rcS.d there are items like these: S35networking -> ../init.d/networking S36ifupdown -> ../init.d/ifupdown Runlevel 0 and 6 are for shutdown and reboot so I guess nothing should be changed there, but runlevel S advertises itself (in README) like something for me: The scripts in this directory whose names begin with an 'S' are executed once when booting the system, even when booting directly into single user mode. The following sequence points are defined at this time: * After the S40 scripts have executed, all local file systems are mounted and networking is available. All device drivers have been initialized. (What bothers me is that both rc0/6.d and rcS.d point to the same networking and ifupdown scripts, but after looking at sources I believe those scripts are smart enough to figure out where to start and where to stop networking.) Now, I think that I should plug my /lib/ufw/ufw-init into /etc/rcS.d, with priority higher that the one of ifupdown and networking, i.e. <= 38 for my /etc/rcS.d. Am I right in this "analysis" ?

  Read the article

• Tcpreplaying using VMware

  - by Methos

  This is more like a testbed setup question. I want to use VMware to debug some networking code in the linux kernel in the VM. My VM has two network interfaces. What I want to do is replay the capture file in the host and receive the packets in the VM. My problem is I do not see replayed packets in the VM. I am running VMware and tcpreplay on the host as sudo. Hence I think there should not be any problem access devices files. I am running VMware workstation 7.0 a. I first began with Custom networking as that provides option of creating your own virtual network name. I wrote /dev/vmnet3 and /dev/vmnet4 for the two interfaces respectively. However, after booting the guest, I did not see any of these interfaces or devices files (in /dev) created on the host. b. Then I tried 'Host Only', but that does not show what bridge/device file is associated with the interface. c. Finally I tried bridged networking mode. I see vmnet1, vmnet8 and vboxnet0 on the host. I have tcpreplayed the capture file on each of these interfaces, for all the above three cases. I tried to capture packets in the VM using "tcpdump -i any". However, I do not see any packets. Any ideas/pointers?

  Read the article

• Shrink a Volume Group in LVM / Linux in order to install Windows on the freed space

  - by Stephan Kristyn

  I have a Volume Group with Unused space. This 40Gig should become an entidy in order to install Microsoft windows 7 on it. I do not have extra space on the drive - that is why I want to shrink the VG! LVG berta resides on sda2 and consists of lv_root lv_swap unused_space I want it to become lv_root lv_swap and have a seperate entidy made out of unused_space. Microsoft Windows 7 has to get installed on this entidy. I do not understand why Linux made simple things complicated. I utterly hate LVM and think its absolute bollocks. Useful Sources: http://www.centos.org/docs/5/html/Deployment_Guide-en-US/s1-system-config-lvm.html Edit: I found the answer. The necessary steps depict how complicated LVM really is. In my opinion it is best to avoiding LVM until pvresize matures as promised in its man pages. Answer: http://fedorasolved.org/Members/zcat/shrink-lvm-for-new-partition If you run into problems when you want to remove lvswap even if in resuce mode, then try swapoff /dev/vg_1/lv_swap lvchange -an /dev/vg_1/lv_swap

  Read the article

• How to configure IIS 7.5 to allow special chars in Url for ASP.NET 3.5?

  - by Sebastian P.R. Gingter

  I'm trying to configure my IIS 7.5 to allow specials chars in the url for ASP.NET. This is important to support wide-spread legacy url's on a new system. Sample url: http://mydomain.com/FileWith%inTheName.html This would be encoded in the url and requested as http://mydomain.com/FileWith25%inTheName.html This simply works, when creating a new web in IIS 7.5, placing a file with the percentage sign in the file name in the web root and pointing the browser to it. This does not work, however, when the web site is an ASP.NET application. ASP.NET always returns a 400.0 - Bad Request error in the WindowsAuthentication module from the StaticFile handler, when pointing to that url. It however displays the requested url correctly and also resolves correctly to the correct physical file (the information from the field 'Physical Path' from the Server error page points to the physically available file). There are hints on how to enable this, so I followed the instructions on these websites step by step: http://dirk.net/2008/06/09/ampersand-the-request-url-in-iis7/ http://adorr.net/2010/01/configure-iis-to-accept-url-with-special-characters.html The second one actually sums up the information from the first post and adds some more information about x64 systems (we're running x64) and on an additional web.config change for this. I tried all that, and still can't get this running from an asp.net web application. And yes: I rebooted after applying the registry changes. So, what do I have to do in addition to the settings described in above posts, to support the legacy url's which contain percentage characters? Additional info: Application Pool mode is integrated. Push after some days. No idea anyone?

  Read the article

• Active FTP client blocked on Windows XP

  - by Ian Hannah

  Summary We have a FTP server (running in active mode). We have an FTP client which is connecting to the server, carrying out a task and then closing the connection. The FTP Client can perform this operation on multiple threads. Problem We have a situation where customers are experiencing occasional failures to carry out operations on a FTP connection. The actual connection has been made to the server but when the server attempts to return data on the data port if fails. Observations We have a simple test FTP client which is running two separate threads. Each thread is performing a recursive listing of files from a root directory. With the firewall running on the client machine the hang happens within a few minutes. If the firewall is turned off on the client machine, the test application seems to run correctly. This does point to a potential firewall issue. However, with the firewall on we can list files on our company FTP server without any issues. If the simple test FTP client runs a single thread then we do not experience any problems whether or not the firewall is turned on. We have another simple test FTP client which was running 4 threads (with each opening a new FTP connection, doing a directory listing and closing the FTP connection as fast as possible) overnight with the firewall turned off. With the firewall turned on it fails in a short space of time. The confusing thing is that if the test FTP client and the FTP server are run on the same machine the failure occurs even though the firewall is turned off. This means that the problem may not be firewall related. Any help with what this could be would be much appreciated. Thanks Ian

  Read the article

• HAProxy is caching the forwarding?

  - by shadow_of__soul

  i'm trying to set up a server structure for an application i'm building in Node.js with socket.io. My setup is: HAProxy frontend forward to -> apache2 as default backend (or nginx, is apache in this local test) -> node.js app if the url has socket.io in the request AND a domain name i have something like: global log 127.0.0.1 local0 log 127.0.0.1 local1 notice maxconn 4096 user haproxy group haproxy daemon defaults log global mode http maxconn 2000 contimeout 5000 clitimeout 50000 srvtimeout 50000 frontend all 0.0.0.0:80 timeout client 5000 default_backend www_backend acl is_soio url_dom(host) -i socket.io #if the request contains socket.io acl is_chat hdr_dom(host) -i chaturl #if the request comes from chaturl.com use_backend chat_backend if is_chat is_soio backend www_backend balance roundrobin option forwardfor # This sets X-Forwarded-For timeout server 5000 timeout connect 4000 server server1 localhost:6060 weight 1 maxconn 1024 check #forwards to apache2 backend chat_backend balance roundrobin option forwardfor # This sets X-Forwarded-For timeout queue 50000 timeout server 50000 timeout connect 50000 server server1 localhost:5558 weight 1 maxconn 1024 check #forward to node.js app The problem comes when i made a request to something like www.chaturl.com/index.html it load perfectly but fails to loads the socket.io files (www.chaturl.com/socket.io/socket.io.js) why it redirect to apache (and should redirect to the node.js app that serve the files). The weird thing is that if i access directly to the socket.io file, after refreshing a few times, it loads, so i suppose is "caching" the forwarding for the client when it makes the first request and reach the apache server. Any suggestion of how this can be solved? or what i can try or look about this?

  Read the article

• rsync general question

  - by CaptnLenz

  I'm trying to use rsync. At first, everything looks very good: rsync -Pniahv -e ssh /home/xxx/Videos/ [email protected]:"/shares/Public/Shared\ Videos/" --stats ... <f+++++++++ Serien/blah.avi <f+++++++++ Serien/blah S01E01 <f+++++++++ Serien/blah - S01E02 <f+++++++++ Serien/blah - S01E03 <f+++++++++ Serien/blah - S01E04 <f+++++++++ Serien/blah - S01E05 <f+++++++++ Serien/blah - S01E06 <f+++++++++ Serien/blah - S01E07 ... Number of files: 232 Number of files transferred: 223 Total file size: 118.24G bytes Total transferred file size: 117.51G bytes Literal data: 0 bytes Matched data: 0 bytes File list size: 9.46K File list generation time: 0.001 seconds File list transfer time: 0.000 seconds Total bytes sent: 10.18K Total bytes received: 712 After that, i copied some of the files manually and runned rsync again in dry mode: rsync -Pniahv -e ssh /home/xxx/Videos/ [email protected]:"/shares/Public/Shared\ Videos/" --stats ... <f..tpo.... Serien/blah.avi <f..tpo.... Serien/blah S01E01 <f..tpo.... Serien/blah - S01E02 <f..tpo.... Serien/blah - S01E03 <f..tpo.... Serien/blah - S01E04 <f..tpo.... Serien/blah - S01E05 <f..tpo.... Serien/blah - S01E06 <f..tpo.... Serien/blah - S01E07 ... Number of files: 232 Number of files transferred: 223 Total file size: 118.24G bytes Total transferred file size: 117.51G bytes Literal data: 0 bytes Matched data: 0 bytes File list size: 9.46K File list generation time: 0.001 seconds File list transfer time: 0.000 seconds Total bytes sent: 10.18K Total bytes received: 712 Why hasn't changed something in the --stats, although only the permissions and the timestamp have to be updated and not the full files need to be copied?

  Read the article

< Previous Page | 503 504 505 506 507 508 509 510 511 512 513 514  | Next Page >