Search Results

Search found 15228 results on 610 pages for 'comment action'.

Page 509/610 | < Previous Page | 505 506 507 508 509 510 511 512 513 514 515 516  | Next Page >

  • directory resource does not create directory

    - by Dan Tenenbaum
    I have a Vagrantfile that provisions a VM by running a chef recipe. The first resource in the chef recipe is: directory "/downloads" do owner "root" group "root" mode "0755" action :create end # check that it worked: raise "/downloads doesn't exist!" unless File.exists? "/downloads" When I run this at work, it works fine. When I run it at home, it fails, the exception is raised when I check to see if /downloads exists. I'm not sure why this is happening. I would expect it to behave identically, since the underlying Vagrant box is the same both at work and at home. I am a chef newb so perhaps there is something I am not understanding about the order in which the resources are run within my recipe? I would expect them to run in sequential order... I also tried putting a notifies call inside the directory block, where I call another execute block :immediately. That works, but inside the second execute block I test to see whether /downloads has been created and it hasn't. Clearly I'm missing something very basic.

    Read the article

  • AngularJS - $routeParams Empty on $locationChangeSuccess

    - by Marc M.
    I configure my app in the following run block. Basically I want to preform an action that requires me to know the $routeParams every $locationChangeSuccess. However $routeParams is empty at this point! Are there any work rounds? What's going on? app.run(['$routeParams', function ($routeParams) { $rootScope.$on("$locationChangeSuccess", function () { console.log($routeParams); }); }]); UPDATE function configureApp(app, user) { app.config(['$routeProvider', function ($routeProvider) { $routeProvider. when('/rentroll', { templateUrl: 'rent-roll/rent-roll.html', controller: 'pwRentRollCtrl' }). when('/bill', { templateUrl: 'bill/bill/bill.html', controller: 'pwBillCtrl' }). when('/fileroom', { templateUrl: 'file-room/file-room/file-room.html', controller: 'pwFileRoomCtrl' }). when('/estate-creator', { templateUrl: 'estate/creator.html' }). when('/estate-manager', { templateUrl: 'estate/manager.html', controller: 'pwEstateManagerCtrl' }). when('/welcomepage', { templateURL: 'welcome-page/welcome-page.html', controller: 'welcomePageCtrl' }). otherwise({ redirectTo: '/welcomepage' }); }]); app.run(['$rootScope', '$routeParams', 'pwCurrentEstate','pwToolbar', function ($rootScope, $routeParams, pwCurrentEstate, pwToolbar) { $rootScope.user = user; $rootScope.$on("$locationChangeSuccess", function () { pwToolbar.reset(); console.log($routeParams); }); }]); } Accessing URL: http://localhost:8080/landlord/#/rentroll?landlord-account-id=ahlwcm9wZXJ0eS1tYW5hZ2VtZW50LXN1aXRlchwLEg9MYW5kbG9yZEFjY291bnQYgICAgICAgAoM&billing-month=2014-06

    Read the article

  • IOS : BAD ACCESS when trying to add a new Entity object

    - by Maverick447
    So i'm using coredata to model my relationships . This is the model in brief Type A can have one or more types of type B Type B has a inverse relationship of being associated with one of type A Type B can have one or more types of type C Type C has a inverse relationship of being associated with one of type B From a UI standpoint , I have a Navigation controller with controllers that successively sets up the first A object (VC-1) , then another viewcontroller (VC-2) creates a B object ( I pass in the A object to this controller) and the B object is added to the A object . Similarly the same thing happens with B and C . The third Viewcontroller (VC3) first creates a C object and assigns it to the passed B Object . Also between these viewcontrollers the managedObjectCOntext is also passed . SO my use case is such that while viewcontroller (VC-3) is the top controller a button action will keep creating multiple objects of type C and add them to the same type B object that was passed . Also as part of this function I save the managedObject context after saving each type C . e.g. code in viewcontroller 3 - (void) SaveNewTypeC { TypeC *newtypeC = (Question*)[NSEntityDescription insertNewObjectForEntityForName:@"TypeC" inManagedObjectContext:managedObjectContext]; [newtypeC setProp1:] ; [newtypeC setProp2:] .. .. **[typeBObject addTypeCInTypeBObject:newtypeC];** [section setTotalCObjectCount:[ NSNumber numberWithInt:typeCIndex++]]; NSError *error = nil; if (![managedObjectContext save:&error]) { // Handle error NSLog(@"Unresolved error %@, %@, %@", error, [error userInfo],[error localizedDescription]); exit(-1); // Fail } [newtypeC release]; } - (IBAction)selectedNewButton:(id)sender { [self SaveNewTypeC]; [self startRepeatingTimer]; } The BAD ACCESS seems to appear when the bold line above executes Relating to some HashValue . Any clues on resolving this would be helpful .

    Read the article

  • Wrapping text and div as a unit

    - by mathee
    I have the following that I would like wrapped as units. <div class='tag-box'> <a href=#>Axe Committee</a> <div class='circle'><a href=#>x</a></div> </div> The CSS for these classes are: .tag-box { display:inline; } .circle { display:inline; padding-left:4px; padding-right:4px; background:rgb(196,15,24); /*dark red*/ -moz-border-radius:10px; -webkit-border-radius:10px; } .circle a { font-size:10px; text-decoration:none; color:#fff; position:relative; top:-2px; } I can have upwards of 20 or 30 of these tag-boxes displayed inline. The problem is that the wrapping will break the words from each other or even break the red circle from the link. This makes it hard to differentiate which circle belongs to which link. (In the future, each circle corresponds to a different action with respect to the link.) See below. How do I prevent this kind of wrapping from occurring?

    Read the article

  • Submit button on nested form submits the outer form in IE7

    - by Mike Christensen
    I have the following code on my Home.aspx page: <form id="frmJump" method="post" action="Views/ViewsHome.aspx"> <input name="JumpProject" /><input type="submit" value="Go" /> </form> However, when I click the "Go" button, the page posts back to Home.aspx rather than going to ViewsHome.aspx. I even tried adding some script to force the form to submit: <input name="JumpProject" onkeypress="if(event.keyCode == 13) { this.form.submit(); return false; }" /> But still even if I press ENTER, the Home.aspx page is reloaded. The only thing I can see that might be borking things is this form is actually a child form of the main POSTBACK form that ASP.NET injects into the page. I'm sure there's something stupid I'm missing and this post will get 800 downvotes instantly banishing me back into the n00b realm, but perhaps I haven't gotten enough sleep lately and I'm missing something stupid. This is on IE7 and an ASP.NET 4.0 backend. I also have jQuery libraries loaded on the page incase jQuery can improve this somehow. Thanks!

    Read the article

  • Blackberry (Java) - Can't get KeyListener to work

    - by paullb
    I am trying to get the KeyListener working for Blackberry, but none of the Dialogs pop up indicating that a key has been pressed (see code below, each action has a dialog popup in them). Any ideas on what i might be doing wrong? public class CityInfo extends UiApplication implements KeyListener { static CityInfo application; public static void main(String[] args) { //create a new instance of the application //and start the application on the event thread application.enterEventDispatcher(); } public CityInfo() { //display a new screen application = new CityInfo(); pushScreen(new WorkflowDisplayScreen()); this.addKeyListener(this); } public boolean keyChar(char arg0, int arg1, int arg2) { // TODO Auto-generated method stub Dialog.alert("key pressed : " + arg0); return true; } public boolean keyDown(int keycode, int time) { // TODO Auto-generated method stub Dialog.alert("keyDown : " + keycode); return false; } public boolean keyRepeat(int keycode, int time) { // TODO Auto-generated method stub Dialog.alert("keyRepeat : " + keycode); return false; } public boolean keyStatus(int keycode, int time) { // TODO Auto-generated method stub Dialog.alert("keyStatus : " + keycode); return false; } public boolean keyUp(int keycode, int time) { Dialog.alert("keyUp : " + keycode); // TODO Auto-generated method stub return false; } } I also tried implementing keyChar on the MainScreen class but that did not yield any results either.

    Read the article

  • Compatibility jquery with IE - click function and fade

    - by Julien Fotnaine
    Here my script : http://jsfiddle.net/3XwZv/153/ HTML <div id="box1" class="choice" style="background:blue;"> <div class="selection ordinateur"> <div class="choix1"><a class="link1" href="#"></a></div> </div> </div> <div id="box2" class="choice" style="display:none;background:red;"> <div class="selection ordinateur"> <div class="choix1"><a class="link2" href="#"></a></div> </div> </div> <div id="box3" class="choice" style="display:none;background:green;"> <div class="selection ordinateur"> <div class="choix1"><a href="#"></a></div> </div> </div> JS $(".link1").click(function() { $('#box1').fadeOut("slow", function(){ $('#box2').css("display","block"); $('#box2').replaceWith(div); $('#box1').fadeIn("slow"); }); $('.link1').fadeOut("slow"); return false; }); $(".link2").click(function() { $('#box2').fadeOut("slow", function(){ $('#box3').css("display","block"); $('#box3').replaceWith(div); $('#box2').fadeIn("slow"); }); $('.link2').fadeOut("slow"); return false; }); The main goal is that when you click on the giant square, I have three differents action. However, in Internet Explorer I block to the second. (the red square does not go to the green square). Please I need your help guys!

    Read the article

  • Castle Windsor: Reuse resolved component in OnCreate, UsingFactoryMethod or DynamicParameters

    - by shovavnik
    I'm trying to execute an action on a resolved component before it is returned as a dependency to the application. For example, with this graph: public class Foo : IFoo { } public class Bar { IFoo _foo; IBaz _baz; public Bar(IFoo foo, IBaz baz) { _foo = foo; _baz = baz; } } When I create an instance of IFoo, I want the container to instantiate Bar and pass the already-resolved IFoo to it, along with any other dependencies it requires. So when I call: var foo = container.Resolve<IFoo>(); The container should automatically call: container.Resolve<Bar>(); // should pass foo and instantiate IBaz I've tried using OnCreate, DynamicParameters and UsingFactoryMethod, but the problem they all share is that they don't hold an explicit reference to the component: DynamicParameters is called before IFoo is instantiated. OnCreate is called after, but the delegate doesn't pass the instance. UsingFactoryMethod doesn't help because I need to register these components with TService and TComponent. Ideally, I'd like a registration to look something like this: container.Register<IFoo, Foo>((kernel, foo) => kernel.Resolve<Bar>(new { foo })); Note that IFoo and Bar are registered with the transient life style, which means that the already-resolved instance has to be passed to Bar - it can't be "re-resolved". Is this possible? Am I missing something?

    Read the article

  • Using fopen and str_replace to auto fill a select option

    - by Anders Kitson
    Hi Everyone, I have this file 'gardens.php', which pulls data from a table called 'generalinfo' and I use fopen to send that data to a file called 'index.html'. Here is the issue, only one option is filled. I have a demo running here Garden Demo <-- this is a new updated page and location, there are more errors than I have locally If anyone could help me fix them Username:stack1 Password:stack1 Is there a better way to achieve what I want to? Thanks! Always. GARDENS.PHP <?php include("connect.php"); $results = mysql_query("SELECT * FROM generalinfo"); while($row = mysql_fetch_array($results)){ $country = $row['country']; $province = $row['province']; $city = $row['city']; $address = $row['address']; //echo $country; //echo $province; //echo $city; //echo $address; } $fd = fopen("index.html","r") or die ("Can not fopen the file"); while ($buf =fgets($fd, 1024)){ $template .= $buf; } $template = str_replace("<%country%>",$country,$template); echo $template; ?> INDEX.PHP SNIPPET <form name="filter" method="get" action="filter.php"> <select class="country" name="country"> <option><%country%></option> </select> </form>

    Read the article

  • ASP.NET MVC - Wrong redirecting, how to debug?

    - by Xorty
    I am stuck with redirecting problem in ASP.NET MVC project. I have mapped tables via LINQtoSQL and each has unique ID as primary key. I am implementing functionallity of 'CREATE'. Basically, after new value is added into SQL table (which means I pressed Save button), I want to be redirected to Details of this freshly added item. Here's little code how I am doing it : [AcceptVerbs(HttpVerbs.Post), Authorize] public ActionResult Create(Item item) { .... return RedirectToAction("Details", new { id = item.ItemID }); Trouble is, I am never redirected to Details view (I have Details.aspx view for items). When I check CallHierarchy in Visual Studio (2010 pro) the hierarchy is indeed little strange, like this : RedirectToAction(string,object) Calls To 'RedirectToAction' Create Calls To Create (no results) Calls From Create (methods of created instance. From there I'll get back to 'RedirectToAction' and to 'Calls to Create' and 'Calls From Create' etc. etc. - loop Edit Calls From 'RedirectToAction' Not supported I am looking for some tools or more specifically 'know how' (since VS probably has some tools) to debug this kind of situations. PS: rooting is default :"{controller}/{action}/{id}", Thanks

    Read the article

  • How to fix Java Image Fetcher error ?

    - by Frank
    My code looks like this : private static JFileChooser fc; if (fc==null) { fc=new JFileChooser(Image_Dir); fc.addChoosableFileFilter(new Image_Filter()); // Add a custom file filter and disable the default (Accept All) file filter. fc.setAcceptAllFileFilterUsed(false); fc.setAccessory(new Image_Preview(fc)); // Add the preview pane. } int returnVal=fc.showDialog(JFileChooser_For_Image.this,"Get Image"); // Show it. After I select an image from the panel, I got the following error message : Exception in thread "Image Fetcher 0" java.lang.UnsatisfiedLinkError: Native Library C:\Program Files (x86)\Java\jre6\bin\jpeg.dll already loaded in another classloader at java.lang.ClassLoader.loadLibrary0(Unknown Source) at java.lang.ClassLoader.loadLibrary(Unknown Source) at java.lang.Runtime.loadLibrary0(Unknown Source) at java.lang.System.loadLibrary(Unknown Source) at sun.security.action.LoadLibraryAction.run(Unknown Source) at java.security.AccessController.doPrivileged(Native Method) at sun.awt.image.JPEGImageDecoder.<clinit>(Unknown Source) at sun.awt.image.InputStreamImageSource.getDecoder(Unknown Source) at sun.awt.image.FileImageSource.getDecoder(Unknown Source) at sun.awt.image.InputStreamImageSource.doFetch(Unknown Source) at sun.awt.image.ImageFetcher.fetchloop(Unknown Source) at sun.awt.image.ImageFetcher.run(Unknown Source) When I run it from an executable Jar file, it works fine, but after I wrapped it into an exe file, I got the above error, why ? How to fix it ?

    Read the article

  • PHP: MySQL query duplicating update for no reason

    - by ThinkingInBits
    The code below is first the client code, then the class file. For some reason the 'deductTokens()' method is calling twice, thus charging an account double. I've been programming all night, so I may just need a second pair of eyes: if ($action == 'place_order') { if ($_REQUEST['unlimited'] == 200) { $license = 'extended'; } else { $license = 'standard'; } if ($photograph->isValidPhotographSize($photograph_id, $_REQUEST['size_radio'])) { $token_cost = $photograph->getTokenCost($_REQUEST['size_radio'], $_REQUEST['unlimited']); $order = new ImageOrder($_SESSION['user']['id'], $_REQUEST['size_radio'], $license, $token_cost); $order->saveOrder(); $order->deductTokens(); header('location: account.php'); } else { die("Please go back and select a valid photograph size"); } } ######CLASS CODE####### <?php include_once('database_classes.php'); class Order { protected $account_id; protected $cost; protected $license; public function __construct($account_id, $license, $cost) { $this->account_id = $account_id; $this->cost = $cost; $this->license = $license; } } class ImageOrder extends Order { protected $size; public function __construct($account_id, $size, $license, $cost) { $this->size = $size; parent::__construct($account_id, $license, $cost); } public function saveOrder() { //$db = Connect::connect(); //$account_id = $db->real_escape_string($this->account_id); //$size = $db->real_escape_string($this->size); //$license = $db->real_escape_string($this->license); //$cost = $db->real_escape_string($this->cost); } public function deductTokens() { $db = Connect::connect(); $account_id = $db->real_escape_string($this->account_id); $cost = $db->real_escape_string($this->cost); $query = "UPDATE accounts set tokens=tokens-$cost WHERE id=$account_id"; $result = $db->query($query); } } ?> When I die("$query"); directly after the query, it's printing the proper statement, and when I run that query within MySQL it works perfectly.

    Read the article

  • Nested Resource testing RSpec

    - by Joseph DelCioppio
    I have two models: class Solution < ActiveRecord::Base belongs_to :owner, :class_name => "User", :foreign_key => :user_id end class User < ActiveRecord::Base has_many :solutions end with the following routing: map.resources :users, :has_many => :solutions and here is the SolutionsController: class SolutionsController < ApplicationController before_filter :load_user def index @solutions = @user.solutions end private def load_user @user = User.find(params[:user_id]) unless params[:user_id].nil? end end Can anybody help me with writing a test for the index action? So far I have tried the following but it doesn't work: describe SolutionsController do before(:each) do @user = Factory.create(:user) @solutions = 7.times{Factory.build(:solution, :owner => @user)} @user.stub!(:solutions).and_return(@solutions) end it "should find all of the solutions owned by a user" do @user.should_receive(:solutions) get :index, :user_id => @user.id end end And I get the following error: Spec::Mocks::MockExpectationError in 'SolutionsController GET index, when the user owns the software he is viewing should find all of the solutions owned by a user' #<User:0x000000041c53e0> expected :solutions with (any args) once, but received it 0 times Thanks in advance for all the help. Joe

    Read the article

  • asp.net MVC ActionMethod causing null exception on parameter

    - by David Liddle
    I am trying to add filter functionality that sends a GET request to the same page to filter records in my table. The problem I am having is that the textbox complains about null object reference when a parameter is not passed. For example, when the person first views the page the url is '/mycontroller/myaction/'. Then when they apply a filter and submit the form it should be something like 'mycontroller/myaction?name=...' Obviously the problem stems from when the name value has not been passed (null) it is still trying to be bound to the 'name' textbox. Any suggestions on what I should do regarding this problem? UPDATE I have tried setting the DefaultValue attribute but I am assuming this is only for route values and not query string values ActionResult MyAction([DefaultValue("")] string name) //Action - /mycontroler/myaction ActionResult MyAction(string name) { ...do stuff } //View <div id="filter"> <% Html.BeginForm("myaction", "mycontroller", FormMethod.Get); %> Name: <%= Html.TextBox("name") %> .... </div> <table>...my list of filtered data

    Read the article

  • ASP.NET - Accessing copied content

    - by James Kolpack
    I have a class library project which contains some content files configured with the "Copy if newer" copy build action. This results in the files being copied to a folder under ...\bin\ for every project in the solution. In this same solution, I've got a ASP.NET web project (which is MVC, by the way). In the library I have a static constructor load the files into data structures accessible by the web project. Previously I've been including the content as an embedded resource. I now need to be able to replace them without recompiling. I want to access the data in three different contexts: Unit testing the library assembly Debugging the web application Hosting the site in IIS For unit testing, Environment.CurrentDirectory points to a path containing the copied content. When debugging however, it points to C:\Program Files\Microsoft Visual Studio 9.0\Common7\IDE. I've also looked at Assembly.GetExecutingAssembly().Location which points to C:\Windows\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files\root\c44f9da4\9238ccc\assembly\dl3\eb4c23b4\9bd39460_f7d4ca01\. What I need is to the physical location of the webroot \bin folder, but since I'm in a static constructor in the library project, I don't have access to a Request.PhysicalApplicationPath. Is there some other environment variable or structure where I can always find my "Copy if newer" files?

    Read the article

  • Drupal: allowing users to sign up to content using a form

    - by james6848
    My apologies if this is a little broad, but I'm struggling to know where to start here! OK, so I have a Drupal site and I need users to be able to sign up for certain content, here is the workflow in detail: I need a form within a block consisting of the following elements: First Name (required) Last Name (required) Organisation (optional) Email Address (required) Then there will be a choice of content to sign up to (using checkboxes): Policy Bulletin Action News eBulletin (which only members can sign up to) Then the usual submit button of course! Upon submission, users will: 1) Be taken to a confirmation page, or 2) Be informed about incorrectly filled in fields, and/or the need to become a user to be able to sign up for the eBulletin. Users will then receive an email when new content of the type(s) they signed up to is created, along with a link to the node. There should be details about how to unsubscribe within this email. I have used the Subscriptions module in the past, but I am not sure if it is possible to use a sign-up form with it. Plus, there is the added complexity that one of the content types, eBulletin, is only available for site members. Like I say, I'm struggling to know where to start, and any ideas would be gratefully received!

    Read the article

  • removing mouse events/controls from swing components with glasspane

    - by Deger
    Hi all, I have a client-server application and i am using swing in the client side. My swing client has one main window (jframe) and lots of panels, toolbars and menubar in it. I want to remove all client action/mouse events (or simply grab and do nothing) while client is waiting response from server by means of glasssPane. Here is the code i wrote: private final static MouseAdapter mouseAdapter = new MouseAdapter() { public void mouseClicked(MouseEvent e) { System.out.println("MouseClicked..!"); } }; private static Cursor WAIT_CURSOR = Cursor.getPredefinedCursor(Cursor.WAIT_CURSOR); private static Cursor DEFAULT_CURSOR = Cursor.getPredefinedCursor(Cursor.DEFAULT_CURSOR); and public static void startWaitCursor(JComponent comp) { MainWindow root = ((MainWindow) comp.getTopLevelAncestor()); root.getGlassPane().setCursor(WAIT_CURSOR); root.getGlassPane().addMouseListener(mouseAdapter); root.getGlassPane().setVisible(true); } public static void stopWaitCursor(JComponent comp) { MainWindow root = ((MainWindow) comp.getTopLevelAncestor()); root.getGlassPane().setCursor(DEFAULT_CURSOR); root.getGlassPane().setVisible(false); } but i am not able to manage the grab mouse events. Changing cursors at the glassPane is working fine but either i am not able to add mouseAdapter or am not able to make glasssPane become to the top level component. Any idea? Thanks.

    Read the article

  • How to link different Servlet together?

    - by Harry Pham
    First of all, I did not use Spring MVC. :) :) Just want to get it out first. Now what I have is different JSP pages that making calls to different Servlets. All the pieces work great individually but I kind of need to link them together. If all of jsp pages make GET request then it would be easy, since I would just pass a type via the web address, and on my servlet side, I would just enumerated through all the parameter, determine which type is it, and delegate to the right servlet. But not all jsp pages make GET request, some make POST request via form. Let see example A.jsp $.getJSON('GenericServlet?type=A', ... GenericServlet.java String type = request.getParameter("type"); if(type.equals("A")){ //Somehow delegate to Servlet A (Not sure how to do that yet :)) } but in B.jsp I would have something like this B.jsp <form action="GenericServlet" method="post"> <table border=0 cellspacing=10 cellpadding=0> <tr> <td>User Name:</td> <td><input type="text" name="username" size=22/></td> </tr> <tr> <td>Password:</td> <td><input type="password" name="password" size=22/></td> </tr> </table> <input type="submit" value="Create User" /> </form> It kind of hard for me to determine in GenericServlet.java that this need to go to servletB

    Read the article

  • JQuery Ajax Get passing parameters

    - by George
    Hi, I am working on my first MVC application and am running into a bit of a problem. I have a data table that when a row is clicked, I want to return the detail from that row. I have a function set up as: function rowClick(item) { $("#detailInfo").data("width.dialog", 800); $.ajax({ type: "GET", contentType: "application/json; charset=utf-8", url: "<%= Url.Action("GetDetails", "WarningRecognition")%>", data: "", dataType: "json", success: function(data) {//do some stuff...and show results} } The problem I am running into is the passing of the "item". I calls the Controller function that looks like this: public JsonResult GetDetails(string sDetail) { Debug.WriteLine(Request.QueryString["sDetail"]); Debug.WriteLine("sDetail: " + sDetail); var myDetailsDao = new WarnRecogDetailsDao(); return new JsonResult { Data = myDetailsDao.SelectDetailedInfo(Convert.ToInt32(sDetail)) }; } But it never shows anything as the the "sDetail". It does hit the function but nothing is passed to it. So, I have read where you pass the parameter via the data but I have tried every combination I can think of and it never shows up. Tried: data: {"item"} data: {sDetail[item]} data: {sDetail[" + item + "]} Any help is greatly appreciated. Thanks in advance. Geo...

    Read the article

  • Semi-generic function

    - by Fredrik Ullner
    I have a bunch of overloaded functions that operate on certain data types such as int, double and strings. Most of these functions perform the same action, where only a specific set of data types are allowed. That means I cannot create a simple generic template function as I lose type safety (and potentially incurring a run-time problem for validation within the function). Is it possible to create a "semi-generic compile time type safe function"? If so, how? If not, is this something that will come up in C++0x? An (non-valid) idea; template <typename T, restrict: int, std::string > void foo(T bar); ... foo((int)0); // OK foo((std::string)"foobar"); // OK foo((double)0.0); // Compile Error Note: I realize I could create a class that has overloaded constructors and assignment operators and pass a variable of that class instead to the function.

    Read the article

  • Problem with checkboxes, sql select statements & php

    - by smokey20
    I am trying to display some rows from a database table based on choices submitted by the user. Here is my form code <form action="choice.php" method="POST" > <input type="checkbox" name="variable[]" value="Apple">Apple <input type="checkbox" name="variable[]" value="Banana">Banana <input type="checkbox" name="variable[]" value="Orange">Orange <input type="checkbox" name="variable[]" value="Melon">Melon <input type="checkbox" name="variable[]" value="Blackberry">Blackberry From what I understand I am placing the values of these into an array called variable. Two of my columns are called receipe name and ingredients(each field under ingredients can store a number of fruits). What I would like to do is, if a number of checkboxes are selected then the receipe name/s is displayed. Here is my php code. <?php // Make a MySQL Connection mysql_connect("localhost", "*****", "*****") or die(mysql_error()); mysql_select_db("****") or die(mysql_error()); $variable=$_POST['variable']; foreach ($variable as $variablename) { echo "$variablename is checked"; } $query = "SELECT receipename FROM fruit WHERE $variable like ingredients"; $row = mysql_fetch_assoc($result); foreach ($_POST['variabble'] as $ingredients) echo $row[$ingredients] . '<br/>'; ?> I am very new to php and just wish to display the data, I do not need to perform any actions on it. I have tried many select statements but I cannot get any results to display. My db connection is fine and it does print out what variables are checked. Many thanks in advance.

    Read the article

  • PHP question about global variables and form requests

    - by user220201
    Hi, This is probably a stupid question but will ask anyway sine I have no idea. I have written basic php code which serve forms. Say I have a login page and I serve it using the login.php page and it will be called in the login.html page like this - <form action="login.php" method="post"> By this it is also implied that every POST needs its own php file, doesn't it? This kind of feels weird. Is there a way to have a single file, say code.php, and just have each of the forms as functions instead? EDIT: Specifically, say I have 5 forms that are used one after the other in my application. Say after login the user does A, B, C and D tasks each of which are sent to the server as a POST request. So instead of having A.php, B.php, C.php and D.php I would like to have a single code.php and have A(), B(), C() and D() as functions. Is there a way to do this? Also on the same note, how do I deal with say a global array (e.g. an array of currently logged in users) across multiple forms? I want to do this without writing to a DB. I know its probably better to write to a DB and query but is it even possible to do it with a global array? The reason I was thinking about having all the form functions in one file is to use a global array. Thanks, - Pav

    Read the article

  • hy i dont get the check value in check box?

    - by udaya
    Hi I have a check box when check that check box the id corresponding to the check box is placed on a text box ... but when there is only single value in the database i cant get the check value why? here is my code <? if(isset($AcceptFriend)) {?> <form action="<?=site_url()?>friends/Accept_Friend" name="orderform" id="orderform" method="post" style="background:#CCCC99"> <input type="text" name="chId" id="chId" > <table border="0" height="50%" id="chkbox" width="50%" > <tr> <? foreach($AcceptFriend as $row) {?> <tr> <td>Name</td><td><?=$row['dFrindName'].'</br>';?></td> <td> <input type="checkbox" name="checkId" id="checkId" value="<? echo $row['dMemberId']; ?>" onClick="get_check_value()" ></td> </tr> <? }}?> </tr> <tr> <td width="10px"><input type="submit" name="submit" id="submit" class="buttn" value="AcceptFriend"></td></tr> </table> </form> This is the script i am using function get_check_value() { var c_value = ""; for (var i=0; i < document.orderform.checkId.length; i++) { if (document.orderform.checkId[i].checked) { c_value = c_value + document.orderform.checkId[i].value + "\n"; } } alert(c_value); document.getElementById('chId').value= c_value; }

    Read the article

  • Is DOM not being loaded ?

    - by Daniel
    I went through episode 88 (Dynamic menus) of the railscasts and when I try to load my *js.erb file in the browser shows me that my fetched data from the controller is getting there Controller def dynamic_departments @departments = Department.all end localhost:3000/javascripts/dynamic_departments.js var departments = new Array(); departments.push(new Array(1,'????',1)); departments.push(new Array(2,'???-???',2)); function facultySelected(){ faculty_id = $('falculty_id').getValue(); options = $('department_id').options; options.length = 1; departments.each(function(department){ if(department[0] == faculty_id){ options[options.length] = new Option(department[1],department[2]) } }); if(options.length == 1){ $('department_field').hide(); } else { $('department_field').show(); } } document.observe('dom:loaded', function(){ alert("DOM loaded"); //$('department_field').hide(); //$('faculty_id').observe('change',facultySelected); }); My routes.rb has the match ':controller/:action.:format' Still...after the page's loaded and I change the value of my collection_select or select nothing happens.What am I missing? *I called the 'alert' and commented the rest to test it....still nothing.

    Read the article

  • Laravel - Mail class Exception

    - by Christian Giupponi
    I need to send email within my app and this is my code: if( $agent->save() ) { //Preparo la mail da inviare con i dati di login $data = [ 'nome' => $input['nome'], 'cognome' => $input['cognome'], 'email' => $input['email'], 'password' => $input['password'] ]; //ATTENZIONE //Questo è da rimuovere in produzione, finge di inviare la mail Mail::pretend(); //Recuero il template e passo alla funzione i dati Mail::send('emails.agents.registration', $data, function($message) use ($data) { $message->to( $data['email'], $data['nome'].' '.$data['cognome'] )->subject('Benvenuto!'); }); return Redirect::action('admin.agents.index')->with('positive_flash_message', 'Agente inserito correttamente.'); } As you can see I have use the Mail::pretend to avoid the email send in development, the problem is that I get this error every time I try to send an email: Undefined property: Illuminate\Mail\Message::$email (View: /var/www/progetti/app/views/emails/agents/registration.blade.php) nd this is my blade view: Email: {{ $message->email }} Password: {{ $message->password }} What's wrong with $message?

    Read the article

< Previous Page | 505 506 507 508 509 510 511 512 513 514 515 516  | Next Page >