Search Results

Search found 21005 results on 841 pages for 'disk format'.

Page 509/841 | < Previous Page | 505 506 507 508 509 510 511 512 513 514 515 516  | Next Page >

• Ubuntu on an XPS 14 Ultrabook with mSATA cache and 500GB HD - how to partition for dual boot?

  - by JDS

  I am getting an XPS 14 ( http://www.dell.com/us/p/xps-14-l421x/pd ) and I want to dual-boot Windows and Ubuntu. This thing has a 500GB standard HD and a 32GB mSATA that can be used as cache. Does anyone know how this thing is partitioned? Is the OS installed on the mSATA drive and data is on the big HD? Is there a BIOS controller or maybe even a Windows driver that makes the mSATA drive and 500GB HD appear contiguous? I get the impression that something makes the mSATA be used invisibly as cache, but I can't find any technical documentation how that works. My primary concern here is wrt dual-booting Ubuntu. I want to know if I need to partition the mSATA separately, or the big HD, or just partition the "magic" contiguous disk space that appears available to the OS.

  Read the article

• How do I tell if my firewire connection is running as 400 or 800?

  - by Tom

  I have a MacBook Pro with FireWire 800 and a freecom external harddrive that has USB3, FireWire 400 and 800. I am using a Nikkai FireWire 800 cable that has 800 connector on one end and a 400 connector on the other end. The 800 connector is attached to the MacBook pro and the 400 connector is attached to the freecom drive. Is there any way to tell what connection has been established? I looked at disk utility and it simply said 'FireWire'. Is there a command-line tool that would give more information? If it's 400, I plan to swap the cable for 800 connector at both ends.

  Read the article

• Is it possible to change the default scan folder on an Eye-Fi Wireless SD Card

  - by MichaelPh

  By default Eye-Fi cards scan the DCIM folder (and subfolders) used by most digital cameras for new images to upload. Is there a way of changing this to a different folder? In my particular case I'm using a Kodak photo scanner (P461) that uses a PHOTO(N) folder format to store the scanned images, as far as I know the device has no configuration interface to alter this setting so that doesn't seem to be an option. This topic on the Eye-Fi forums is the closest I've come to a solution, but a perfunctory investigation of Disk Probe doesn't make it obvious what needs to be modified on the card.

  Read the article

• How to extract .raw backup of Windows to a partition?

  - by JamerTheProgrammer

  I have a backup of a Windows 7 drive (virtualbox install) made in .raw format and I want to extract it to my empty partition ready for Windows. Im using OSX. Any ideas? I have tried this: sudo dd if=/Volumes/DATA/bootcamp.raw of=/dev/disk0s6 Which works fine but when I reboot (im on a hackintosh so im using the Chameleon boot loader) I get the normal Chameleon boot menu but with an unknown GPT partition (thats what its called) and If I select that it says: Missing Operating system. Is the MBR broken on that partition?

  Read the article

• Tool to bulk speed up/convert an audio file

  - by User1

  I want to listen to certain podcasts on my phone but I have two common problems: The audio is in some weird format (some don't play on my phone). The audio is slow. I want to use something like sox or avconv to bulk convert the files. Since this is just voice and going on a cell phone, small low-quality files would be best for me. I had some good success using avconv: avconv -i weird.wma normal.ogg Unforunately, this command creates an enormous ogg file and I can't get it play faster. Ideally, this particular file would play at 170% of the original speed.

  Read the article

• Changing encryption settings for Microsoft Office 2010/2013

  - by iridescent

  Although there are Office 2013 settings to change how encryption is performed, when you encrypt Open XML Format files (.docx, .xslx, .pptx, and so on) the default values — AES (Advanced Encryption Standard), 128-bit key length, SHA1, and CBC (cipher block chaining) — provide strong encryption and should be fine for most organizations. Quoted from http://technet.microsoft.com/en-us/library/cc179125.aspx . I can't figure out where is the setting to change how encryption is performed. Is there any possible to change the encryption algorithm being used instead of the default AES-128 ? Thanks.

  Read the article

• Best practice for scaling a single application source to multiple nodes

  - by Andrew Waters

  I have an application which needs to scale horizontally to cover web and service nodes (at the moment they're all on one) but interact with the same set of databases and source files (both application code and custom assets). Database is no problem, it's handled already with replication in MongoDB. Also, the configuration of the servers are the same (100% linux). This question is literally about sharing a filesystem between machines so that its content is always correct, regardless of the node accessing it. My two thoughts have so far been NFS and SAN - SAN being prohibitively expensive and NFS seeing some performance issues on the second node with regards to glob()ing in PHP. Does anyone have recommended strategies or other techniques that don't involved sharding data across nodes or any potential gotchas in NFS that may cause slow disk seek times? To give you an idea of the scale, the main node initialises it's application modules in ~ 0.01 seconds. The secondary is taking ~2.2 seconds. They're VM's inside a local virtual network in ESXi and ping time between them is ~0.3ms

  Read the article

• Identify SATA hard drive

  - by Rob Nicholson

  Very similar question to: Physically Identify the failed hard drive But for Windows 2003 this time. Scenario: Four identical SATA hard drives plugged into motherboard (no RAID controller here) Configured as single drive in Windows as a spanned volume One of them is starting to fail with error "The driver detected a controller error on \Device\Harddisk3" How do you cross-reference Harddisk3 to the physical SATA connection on the motherboard so you know which drive to replace? I know replacing this drive will trash the spanned array requiring it to be rebuilt anyway so my rough and ready solution is: Delete the spanned partition Create individual partitions on each drive labelled E: F: G: and H: and work out which one is Harddisk3 Power down, remove each disk one at a time, power-up until the drive letter disappears But this seems a rather crude method of identifying the drive. The SATA connectors will be numbered on the motherboard but I appreciate this might not cross-match to what Windows calls them. Thanks, Rob.

  Read the article

• How can I split a stereo audio track of a movie into two separate audio tracks?

  - by pesche

  I often record TV shows with a hard disk recorder/DVD writer, burn them as VRO file and convert to MP4 with Handbrake. The shows are bilingual broadcasts with two mono audio channels instead of a stereo one: dubbed voice on the left, original voice on the right. The TV set and VLC are both perfectly capable to play only the left or the right channel, but other video players may just offer to select between different stereo audio tracks (like they are present on many DVDs). I'd like to have an easy process to create MP4 or MKV files of these shows where the two audio channels are split into two separate audio tracks. The only way that I know of is to extract the audio track (e.g. using MPEG Streamclip), split it into two tracks using an audio tool like Audacity and then merge the audio tracks back (using a DVD authoring software, don't remember all details). Clearly not a thing to repeat regularly. Preferably a solution should run on Mac OS X, but Linux or Windows solutions are very welcome, too.

  Read the article

• customized xkb layouts not working (in KDE?) after upgrade from Ubuntu 9.10 to 10.04

  - by Alan

  I customised my keyboard layout in 9.10 by editing the appropriate /usr/share/X11/xkb/symbols/ file. After upgrading to 10.04 I noticed it had overwritten all my modifications, so I recovered the layout and overwrote the symbol file's base entry. Sadly KDE (and, presumably, the entire OS) seems to ignore the files altogether. The help files don't mention anything about modifying layouts anyway (and the layout switcher seems to be using setxkbmap, which uses the above path according to its man page), so I'm at a bit of a loss. Do I need to compile this into some other format somehow or how do I get it to work?

  Read the article

• Switching to Linux, Need backup help

  - by Stephen

  I have an existing Vista installation on my thinkpad x200 and I want to install Linux on my machine. I've done this several times already but I usually format the whole disk and dual boot on Windows and Linux. Which means I have to reinstall and reconfigure everything I had on Windows. What I want to do is backup my windows installation (into an image) and start a clean Linux installation, and run the windows image thru Vmware or Virtualbox. Whats the easiest way to do this? any free tools available? I've seen acronis but dont wanna buy it for a 1 time session only.

  Read the article

• auspex LFS backups

  - by user1250465

  I have some backup tapes which existed on an AUSPEX file server. The backups were written to tape with the SunOs version of the CPIO command. Now that I need to restore them, (of course there are no more auspex servers in existance), the backups won't restore because the headers are not standard. I have dumped the tape images to disk. PAX, CPIO, and TAR cannot read the images. I've tried all of the CPIO format options. The errors I get are "name too long", "byte swapped in header", or just junk output. I can open up the images and read the contents of the files, but cannot restore the images. I have found that SunOs had a special header in CPIO V2.5 images. I have found the source for cpio, now I need definition of the SunOs header inside CPIO?

  Read the article

• fsck: FILE SYSTEM WAS MODIFIED after each check with -c, why?

  - by Chris

  I use a script to partition and format CF cards (connected with a USB card writer) in an automated way. After the main process I check the card again with fsck. To check bad blocks I also tried the '-c' switch, but I always get a return value != 0 and the message "FILE SYSTEM WAS MODIFIED" (see below). I get the same result when checking the very same drive several times... Does anyone know why a) the file system is modified at all and b) why this seems to happen every time I check and not only in case of an error (like bad blocks)? Here's the output: linux-box# fsck.ext3 -c /dev/sdx1 e2fsck 1.40.2 (12-Jul-2007) Checking for bad blocks (read-only test): done Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Pass 5: Checking group summary information Volume (/dev/sdx1): ***** FILE SYSTEM WAS MODIFIED ***** Volume (/dev/sdx1): 5132/245760 files (1.2% non-contiguous), 178910/1959896 blocks

  Read the article

• How can I disable logging in Tomcat 7?

  - by WilliamMayor

  I have a Tomcat 7 server running in a VM that has very little disk space (20G). Over the course of a few days Tomcat will fill the space with logging info (usually about 15G before it runs out). I've tried turning down the log level (from INFO to SEVERE) in the logging.properties file, I've also tried sending the log info to /dev/null. It doesn't seem to work as I still get a full log directory after no time at all. Can I put a file size limit on the log files? Is something overriding the properties I'm setting? Where can I find this information? My Google Fu just returns information about logging from within an application using JULI.

  Read the article

• remove disks or other media press any key to restart

  - by Sam I am

  I'm having an issue regarding a disk imaging process. I have a WinPE image that will re-partition, the hard drive, and put a boot-able image on it. When I run the imaging process from an initial state, I get the following error remove disks or other media press any key to restart If I run the process subsequent times, It will work as desired, but I'm still interested in getting the process to work the first time. How do I figure out what's going on here? what should I be looking at? I'm a little bit out of my depth here, I don't know what to do next

  Read the article

• Allow READ access to local folders in 2003SBS AD

  - by Dan M.

  Have a SBS2003 client with a mess of a domain that is in process of being cleaned. But, for the life of me I cannot find a setting that will allow write access to the local hard disk for domain users with redirected profiles(to the server). This is needed only for one program that will not follow a symbolic link to the network path, instead it seems to be hard coded to the %appdata% folder but only on the c: drive.... So question is how can I allow "Domain users" write access to the local %appdata% directory? I have tried setting it manually on a machine but it kept resetting to RO no matter how many times I tried. Everytime I would uncheck the RO property it would reset sometime right after i hit OK. Thanks in advance! Dan

  Read the article

• How can I improve performance over SMB/CIFS for an application that has poor write speeds?

  - by Jeremy

  I have a third party application that reads several large files and generates a third large file. Its performance is quite good when the generated file is stored on "local storage", i.e. either a direct attached or iSCSI-based disk. The source files that are read can be stored remotely on our NAS and accessed via SMB with little effect on performance. However, if we attempt to write the target file to any kind of SMB/CIFS share (Samba or Windows Server) the performance drops almost ten-fold. This is unacceptably slow in our case. Writing files to network shares is not otherwise slow. I can copy large files to SMB shares and get great performance - near what I would expect is possible given the disks and network in question. I have a theory that this application's problem with SMB shares has something to do with a lack of write caching over the share and perhaps lots of network roundtrips. Is this possible and is there anything that can be done about it?

  Read the article

• Network backup for Macs and PCs - formatting question

  - by neilfein

  I'm trying to use a LaCie 2TB drive as an AirPort drive, for backup on a home network. We have one mac and two PC laptops. My plan is to create a Mac partition and a Windows partition. However, Disk Utility won't let me set the windows partition to Windows format; there's no option in the menu for it in the partition tab. Am I doing something wrong? Alternatively, is there a way to partition the drive with one partition that all three machines can see? We have a Mac G5 with 10.4 and two laptops with Windows 7. Thanks!

  Read the article

• Why does diskpart set the volume attributes on all volumes?

  - by Nick

  I was trying to migrate a Win7 OS from a HDD to a SSD. I've created 2 partition with 1024KB offset, with diskpart: 100MB System Reserved and a 60GB for C:. I've cloned their contents using Easeus Disk Copy. I've loaded the Windows 7 Boot DVD, and wanted to use diskpart to drop the letter for the System Reserved partition and make it hidden. select volume 0 detail volume attribute volume set nodefaultdriveletter attribute volume set hidden These 2 attribute set commands actioned on both volumes (0 and 1, MSR and C:) instead of the selected one, and viceversa. I've tried to clear these attributes from volume 1, but it cleared them also from volume 0. Why does DiskPart have this behaviour?

  Read the article

• my sweet old VHS collection

  - by microspino

  Which is the best procedure and digital format to resurrect my old VHS library i a way I can see It on my LCD TV? I have a not so big collection 100 VHS I have plenty of storage I have a network media tank (A110 popcorn Hour but I can also purchase a new media center if needed) I have an old working VCR (but again I can pick a specific one new if you think It's better to save quality) The VHS cassette collection seems to have retained a good quality over the years. Of course I have some computer (either mac and pc) to do the process. Which software do I need/miss? Please give me some advice.

  Read the article

• Windows XP , HP , IntelInside Trobelshooting

  - by Jamil Hneini

  My Windows XP PC has stopped booting. On start up, before Windows boots a screen appears saying: Windows Could Not Boot: Could Not Find or Corrupted file <Windows root>\Sytem32\Hal.dll Please Reinstall the file... From that I understand that I have to reinstall the OS but my computer is so old that I have lost the backup and recovery disk. My Computer's Info: 32Bit Computer Pentium 4 Windows XP Service Pack 2 HP History: My Computer has 4 hard drives 2 internal 40 GB drives (C And D) 2 external 8GB drives (E And F) Additional Info: I need the files inside C And E The computer reads my flash drive as a hard drive (8.45GB)(I have never booted while my USB pluged in while I was troubleshooting) With some test I discovered that the C drive wasn't detected by the computer I have already configured the boot order of BiOS I have Set The SATA to IDE The Question: I have a setup for windows 8 32 bit how can I boot from my USB to run that setup? If that isn't the proper way to handle this problem please tell me the proper way.

  Read the article

• CPU fan turns on and off repeatedly without booting

  - by rnso

  My PC has suddenly stopped starting up. On checking with case open, the CPU fan starts running when the power is turned on, but it stops after about 2-3 seconds, restarts again after about 2-3 seconds and the loop is repeated. There is no beep and nothing appears on the screen. On searching the internet, I found there could be several reasons for this. I tried removing hard-disk, CD drive, tightening connections etc but of no avial. I also tried using a new power supply but the response is the same. Where could be the problem and how can it be solved? Thanks in advance.

  Read the article

• Reverse lookup of inode/file from offset in raw device on linux and ext3/4?

  - by lilinjn

  In linux, given an offset into a raw disk device, is it possible to map back to an partition + inode? For example, suppose I know that string "xyz" is contained at byte offset 1000000 on /dev/sda: (e.g. xxd -l 100 -s 1000000 /dev/sda shows a dump that begins with "xyz") 1) How do I figure out which partition (if any) offset 1000000 is located in?(I imagine this is easy, but am including it for completeness) 2) Assuming the offset is located in a partition, how do I go about finding which inode it belongs to (or determine that it is part of free space) ? Presumably this is filesystem specific, in which case does any one know how to do this for ext4 and ext3?

  Read the article

• VMWare Server lck file keeps coming back

  - by muncherelli

  I am running VMWare Server 2.0 on a Debian Lenny system as a host OS. I am getting this error when I try to start a Virtual Machine Cannot open the disk '/var/lib/vmware/Virtual Machines//.vmdk' or one of the snapshot disks it depends on. Reason: Failed to lock the file. So I looked around on the web and found that I need to delete the .lck folder and file in order to get this error This seems to happen any time I reboot my Debian Server. The Virtual Machines sometimes do not recover and this lck file is causing problems. Should I create a cron script that does a rm *.lck on each of my machines on reboot? Looking for any direction on how to resolve this. It seems when i do a "reboot" command it is maybe not gracefully shutting down the VMware containers so the lock files are still intact?

  Read the article

• rsyslog appears to act on old configuration

  - by Jeff Lee

  I'm using a template to dynamically generate rsyslog filenames. I've made some changes from my original format, but rsyslog still appears to be using both the new template and the old after restarting. My filename template went from this: $template RemoteDailyLog,"/var/log/remote/%hostname%/%$year%/%$month%/%$day%.log" To this: $template RemoteDailyLog,"/var/log/remote/%hostname%/%fromhost-ip%/%$year%/%$month%/%$day%.log" I stopped rsyslogd using service rsyslog stop, deleted all of my log files using rm -rf /var/log/remote/*, and then restarted rsyslogd with service rsyslog start. The problem is rsyslog seems to be building folder structures of the type "/var/log/remote/%hostname%/%$year%/%$month%/%$day%.log" (i.e., without the remote IP), which no longer appears anywhere in my configuration. Is it possible that old log or config data have been cached somewhere and are being preserved through the server restart? This is creeping me out a little.

  Read the article

< Previous Page | 505 506 507 508 509 510 511 512 513 514 515 516  | Next Page >