Search Results

Search found 23449 results on 938 pages for 'browser close'.

Page 510/938 | < Previous Page | 506 507 508 509 510 511 512 513 514 515 516 517  | Next Page >

• Disabling certain JBoss ports

  - by Rich

  We are trying to configure JBoss 5.1.0 to be as lightweight and as secure as possible. One of the parts of this process is to identify and close any ports we do not need. Three ports that we have outstanding but don't believe we need are: 4457 - bisocket 4712 - JBossTS Recovery Manager 4713 - JBossTS Transaction Status Manager We don't think we need any of these features (but could be wrong). Bisocket seems to be a way for JMS clients behind a firewall to communicate with JBoss. We hardly use JMS now and when we do, it is very unlikely that we will need this firewall traversing ability. I am less sure about whether we need the two JBossTS ports - I am guessing these are used in a clustered environment - we aren't clustered. So my question is, how do we disable these ports (and associated processes where possible), or if we need these ports, why do we need to keep them open?

  Read the article

• What's the advantage of using a bash script for cron jobs?

  - by AlxVallejo

  From my understanding you can write your crons by editing crontab -e I've found several sources that instead refer to a bash script in the cron job, rather than writing a job line for line. Is the only benefit that you can consolidate many tasks into one cron job using a bash script? Additional question for a newbie: Editing crontab -e refers to one file correct? I've noticed that if I open crontab -e and close without editing, when I open the file again there is a different numerical extension such as: "/tmp/crontab.XXXXk1DEaM" 0L, 0C I though the crontab is stored in /var/spool/cron or /etc/crontab ?? Why would it store the cron in the tmp folder?

  Read the article

• Is it possible to group chrome extension processes?

  - by Shajirr

  I have a problem with Chrome - most extensions, even those which consume merely 5-10 MB of memory, each have their own process, and because of that Chrome uses a single process for all the tabs, which consume a lot more memory compared to extensions, even with --proccess-per-tab switch. This behavior seemes illogical - why do you need extensions in separate processes if you can't use your browser properly when it takes 5-10 seconds just to load a tab and freezes constantly? Is it possible somehow to limit the number of processes which can be used for extensions, maybe group them to 10 extensions per 1 process?

  Read the article

• Emacs: Prevent TRAMP connection closing

  - by Josh

  I'm using emacs with TRAMP ( C-x C-f /ftp:[email protected]:/ ), and randomly, sometimes ten minutes, sometimes, ~12 seconds (no exaggerating) my connection will close (I think). I'll try to type, or list a dir, and it will say "Opening FTP connection to site.com...". Is there a way to tell it to just keep the connection open until I exit? Or is it the webserver killing the connection? I'm just using standard FTP. Thanks.

  Read the article

• Set up new dedicated server

  - by aldo

  I'm a newbie. I just bought a new dedicated server which running windows server 2008 r2 and have an ip for example 128.98.34.112. I bought a domain xyz.com without hosting from godaddy.com and i want to host it to my new server. in godaddy.com i already follow this steps http://www.webhostingtalk.com/showthread.php?t=237604. i also have installed plesk in my new server and create a domain with the name xyz.com and set the A record for xyz.com to 128.98.34.112, and set the NS record to ns1.xyz.com and ns2.xyz.com. But until now i still can not open the xyz.com from browser. Whats wrong? Do I need to install active directory to host a domain? thanks

  Read the article

• Connect to server in VMWare player while host is not connected to a network

  - by blockcipher

  Hello, I have a linux server VM on my host machine using VMWare player and if I'm on a network, I can connect to the web server on the VM via a web browser. However, I tried to do the same while I was disconnected from a network and I couldn't. The networking is set to Host-only and I did use dhclient/ifconfig to make sure that yes, I did have an IP address assigned to the VM. While I can work around this, the purpose of the VM is to allow us to demo our app from any machine and that machine may not be connected to a network. Thanks.

  Read the article

• How to secure a VM while allowing customer RDS (or equivalent) access to its desktop

  - by ChrisA

  We have a Windows Client/(SQL-)Server application which is normally installed at the customer's premises. We now need to provide a hosted solution, and browser-based isn't feasible in the short term. We're considering hosting the database ourselves, and also hosting the client in a VM. We can set all this up easily enough, so we need to: ensure that the customer can connect easily, and also ensure that we suitably restrict access to the VM (and its host, of course) We already access the host and guest machines across the internet via RDS, but we restrict access to it to only our own internal, very small, set of static IPs, and of course theres the 2 (or 3?)-user limit on RDS connections to a remote server. So I'd greatly appreciate ideas on how to manage: the security the multi-user aspect. We're hoping to be able to do this initially without a large investment in virtualisation infrastructure - it would be one customer only to start with, with perhaps two remote users. Thanks!

  Read the article

• Network connection via USB

  - by Fco

  Can I get my Nexus One/Android on my local network over USB instead of WiFi and browse to my computer's IP address, the one to which the phone would be connected to, via USB? For instance, let's say my computer has an IP address 100.1.1.1 and when I go to it from the computer I would go to my localhost and see a website I've set up locally in the computer. Then, I connect my phone to that computer via USB. Can I then go to 100.1.1.1 from the browser and see the same website? All this through the USB, no WiFi?

  Read the article

• Access server by hostname without domain

  - by projectshave

  I want to access services on other machines on my home network with just their hostname. In every browser, "http://machine" fails, but adding a period in "http://machine./" works. Is there a way to avoid adding that extra period? My setup is a router with DD-WRT w/ DNSmasq turned on, Win7 machines and several Ubuntu VMs. nslookup works fine with just hostname. Remote desktop works, but TightVNC needs the extra period. ssh needs the period. As I said, all my browsers need the extra period. I'd prefer a solution that doesn't require manually maintaining the hosts file. Thanks.

  Read the article

• How to stop LDAP authentication in ubuntu?

  - by Kery

  My OS is Ubuntu 12.04 and use LDAP authentication. Now I meet a problem that another people want to access my system. But he is in another domain so he can't login. And I have no right to change this configuration in LDAP server. So I have to choose a workaround to solve this problem, for example close the LDAP authentication and use local authentication (I have root right in my system) or create another account which is not registered in LDAP server (I did this but can't change the created account password. The error is 'password reset by root is not supported'). Of course any other suggestion is appreciated! Than you in advance!

  Read the article

• software to view logs on remote server

  - by Tarun

  I have configured syslog server on my linux machine like this Linux Machine (syslog client) -- Linux Machine (syslog server) I have configured it and its working properly. Now, the problem is I want to look at the logs located on remote server in a particular directory for example /var/log/host-ip/httpd.log. One way is that I use ssh for that and then see those logs using commands like tail etc. So is there any Browser based graphical utility which I can use on my machine in which I just give the remote folder location, ip-address etc. and the software shows me the logs present on that remote server. Thanks.

  Read the article

• node.js server not running

  - by CMDadabo

  I am trying to learn node.js, but I'm having trouble getting the simple server to run on localhost:8888. Here is the code for server.js: var http = require("http"); http.createServer(function(request, response) { response.writeHead(200, {"Content-Type": "text/plain"}); response.write("Hello World"); response.end(); }).listen(8888); server.js runs without errors, and trying netstat -an | grep 8888 from terminal returns tcp4 0 0 *.8888 *.* LISTEN However, when I go to localhost:8888 in a browser, it says that it cannot be found. I've looked at all the related questions, and nothing has worked so far. I've tried different ports, etc. I know that my router blocks incoming traffic on port 8888, but shouldn't that not matter if I'm trying to access it locally? I've run tomcat servers on this port before, for example. Thanks so much for your help! node.js version: v0.6.15 OS: Mac OS 10.6.8

  Read the article

• Website ocasionally does not load on first click

  - by tfe

  Today I noticed that my website hosted on a virtual server ocasionally does not load on first click. I click on some link, browser starts loading page but nothing loads and does not not appear any error message (like "connection reset by peer etc). Nothing. When I click the same link again, page loads immediately. The same situation on 2 computers in different browsers. It happends not always, maybe on each 20... or 30 click. Sites from other servers load without this problem. Any ideas what can cause this problem?

  Read the article

• Git: get back my commited data from a messed up local repo

  - by Karussell

  I am a newbie to git so I think I made something stupid (will move back to hg soon ;-)) Assume I'm at version A and I commited a change but didn't want that. Now assume we have version B. I didn't found a good solution how to cleanly roll B back to A but went back to A via checkout and continued commiting - assume I have version C. A--->B \-->C Now the problem is that those commits were successfull (I can see the SHA's and the msg in .git/logs/HEAD) but the commits do not show up in the log and I couldn't push them to github. Before detecting the mess I checkout to 'master' ... and git rolled all back to B. How can I get my version C back or are my changes lost? Is this the same problem as described here? Please close. I posted it here. On stackoverflow seems to be more questions related to that ...

  Read the article

• Java Applets fail to launch in Windows 7 64bit

  - by Steve

  Hi can you help? I'm having great trouble launching Java applets using Windows 7 64 bit. I have the 32 bit version of Java installed (as recommended, for use with 32 bit browsers). When I click on an Java applet to open it the Java logo shows with a circular progress bar, but the process goes no further, just the progress bar going round and round. There are no error messages. The computer is a few months old and Java has never worked properly. I've tried with both IE9 and Chrome, followed the suggested fixes, uninstall then reinstall, check certain browser settings (all were in order), check Java control panel settings (again all was in order) delete the internet cache etc, tried 32bit & 64bit Java side by side. All to no avail. I'm baffled Is there anything else to try, or do I have to accept a computer without Java (Very inconvenient!) Thanks

  Read the article

• Help: My SSL Certificate expired but I can't renew this weekend, is there a way I can disable SSL through IIS?

  - by shogun

  Or perhaps force redirect to HTTP when they request HTTPS? I tried removing the SSL port settings under 'Advanced' but it broke the login page. I don't want to do a deploy/recompile right now but I am able to edit the VIEWS. However I am thinking there may be a way for IIS to do this, but then again I think the .NET code tries to force SSL. Crap. This is bull crap because I was bugging people about getting the new certificate since December and they were like oh we will take care of it... I think it may have even gotten to the point where they were getting annoyed with me hassling them about it! (rant over.) And yes, the key is that more support tickets will be caused by the browser giving a security error than if SSL was removed entirely for one day. Becaues they wouldn't very very likely not notice it being gone.

  Read the article

• Shockwave not responding in Google Chrome

  - by Nithish Inpursuit Ofhappiness

  When browsing in Google chrome, I get an error message The exception unknown software exception (0x40000015) occurred in the application at location 0x0025bf18. I get a pop-up message later saying that the shockwave plugin is not responding. I've tried uninstalling and re-installing Chrome (even by clearing my browsing data while uninstalling) and still the error persists. There are 2 instances of shockwave that I could see in my chrome by typing chrome://plugins. I've tried disabling either of those alternatively too. This prevents me from browsing a lot of sites including FB and Stackoverflow through my favorite browser. I dont have any problem when I work from Internet Explorer. Please help!

  Read the article

• Outlook 2010 stopped marking messages as read after reading them

  - by dunxd

  Yesterday I noticed that Outlook 2010 had stopped marking messages as read unless I right click and select Mark as Read. I have checked the Reading Panel settings (it's set to 0 seconds), but I don't use the reading panel to read my mail. When I open a message by doubleclicking it, then close it again, the message is still marked as Read. Outlook 2010 is connecting to Exchange Server 2003. This was working fine until yesterday. As far as I know there have been no config changes at either the client or server end.

  Read the article

• Page loading hangs and never times out (Apache)

  - by Lucas -luky- N.

  I have set up Apache2 on a guest Ubuntu 10.04 OS (virtualbox). I have created a "big" HTML file (4MB) with only plain text and when I access a page through my local IP address such as http://192.168.0.100 it successfully loads the entire page. However, when I try to access it through my public IP address the browser loads part of the page and then hangs forever on "loading". I can load a simple webpage though. I'm not sure whether it's an issue with my Apache configuration, Virtualbox, Router or Modem. Any clues? Tried enabling Debug and mod_status but didn't find any useful information.

  Read the article

• Can a mapped network drive be reconnected from the command line?

  - by Stephen Jennings

  On a daily basis I find myself in the Windows command prompt needing to access a network drive that is mapped but disconnected. I have yet to find a command that will reconnect this drive without unmapping and remapping (which leads to a password guessing game, since I don't own these computers). I would also like to be able to script this so every night the drive is reconnected if it has become disconnected somehow. The fastest solution I currently have is to: Type "start." to open explorer, Alt-D to focus the address bar, type the drive letter I want and press enter, and wait for it to display the drive contents, then finally, close explorer and go back to the command prompt. I know it's a minor inconvenience, but I'm often doing this through a slow VNC or PCAnywhere connection where doing anything through GUI is awful, so I'm just wondering if there's a better solution.

  Read the article

• Is there a way to watch EyeTV in alarm-clock style "sleep" mode on your iMac?

  - by Mark S.

  My wife likes to watch TV to go to sleep, the only trouble is that the only TV we have in our house is the iMac with the EyeTV Hybrid. I'd like to have the TV turn off after 1.5 hours of watching without changing the channels/volume--sortof like an alarm clock 'sleep' function. Do you know of a way to do this either with an EyeTV plugin or an App that might be able to try to detect such conditions and shut down the display? Right now EyeTV overrides the screensaver. The Power saver functions don't really work because she doesn't start watching at the same time every night and periodically she will want to record a 2 or 3 AM show. All I want to do is "close" (but not quit) EyeTV and shut off the display.

  Read the article

• How do I prevent my swf files being hotlinked, downloaded etc.

  - by undefined

  I have swf files that are embedded in a PHP page using SWFObject. These swf files are in the same directory as my PHP files. for example www.myurl.com/index.php embeds www.myurl.com/flashfile.swf, index.php and flashfile.swf are in the same directory. However I want to prevent people from being able to type in www.myurl.com/flashfile.swf and viewing the swf. I want the browser to deny access to this file unless it has been embedded by the PHP file. Should I move my swfs to another folder and protect this folder somehow - is this with the .htaccess file? I am running Apache on a linux machine. While my main concern is for swf files I would like to protect graphics used on the site too. all help appreciated thanks

  Read the article

• Recommend a web file sharing software please

  - by Baczek

  I'm looking for a web platform to put company files at. My requirements are: should be accessible via a browser should be open source must be installable (dropbox is a no-go) must have an option to put a access time limit on a file must perform garbage collection automatically after a file expires must be able to mark files as public or private an option to protect a file via a pin-code for users without accounts in the system would be nice to have The problem is I don't even know what to search for - all my googling results in either complete groupware solutions or p2p file sharing software. If such a thing doesn't exist, please don't hestitate to say so, so I can crawl to a corner and cry myself to sleep. TIA

  Read the article

• Disable address bar in Internet Explorer 9

  - by token

  I'm trying to disable the address bar in IE9. I've done a significant amount of searching on this and just can't seem to find a way to make it happen. A lot of web resources discuss how to do it in IE8, but not IE9. The reason you might ask? I have an application being hosted in a remote desktop farm that links to web pages outside of the application into Internet Explorer. I need to ensure users are limited to just going to the pages the program pushes them to. I realize I could use a proxy server to limit where they can go, but I'm trying to find a really simple way to just disable the address bar instead. I can't use Kiosk mode because it puts the browser into full screen mode. This won't work for my situation as I need to give users what appears to be a regular browsing experience without an address bar.

  Read the article

• Error when starting Outlook 2007 on Windows 7

  - by Jared

  Every time I start Outlook 2007 SP2 on my Windows 7 box Outlook will look like its loading fine, then I get this error message: cannot start microsoft office outlook. cannot open the outlook window and outlook will close. I was able to get outlook to start by using outlook.exe /resetnavpane in the Start-Search box, a nice tip which I got from this social.microsoft.com page. But it didn't fix the problem since outlook is still complaining when it starts after a reboot. What can I do to get outlook to startup normally?

  Read the article

< Previous Page | 506 507 508 509 510 511 512 513 514 515 516 517  | Next Page >