Search Results

Search found 15651 results on 627 pages for 'setup'.

Page 510/627 | < Previous Page | 506 507 508 509 510 511 512 513 514 515 516 517  | Next Page >

• cheap gigabit switch for small business

  - by neoice

  my friend's business is currently borrowing my Adtran 1224R and is very happy with it. it's configured with a few VLANs to segment customers, internal traffic and public wifi. port 1 is a "trunk" port to the router, a chunky Linux box with iptables+NAT. they push a lot of traffic over the LAN (data backups) and really need gigabit. besides, I'd like my Adtran back :P my goal is to find a cheap(ish) switch that can function as a drop-in replacement. it looks like VLAN trunking is actually part of the 802.1q spec, so anything with VLAN support should cover the current trunk-to-router setup. it's nice to have both a web interface and SSH, but I can configure it either way if needed. things like the Netgear GS724T have caught my eye, but it seems like none of the hardware in the $300-500 range have really solid reviews. I'm concerned that "cheaper" hardware might not work for a network full of power users. does anyone have a recommendation for the Netgear GS724T or a switch that will meet my needs?

  Read the article

• Is it possible to update Lenovo T500 hybrid graphics driver?

  - by Shiki

  Hope someone had the same problem before. My laptop comes with two video "cards". Intel MHD4500 and ATI Radeon HD3650 (mobility). I can switch between them with the "Lenovo Battery Manager" from the taskbar. All good, but Lenovo provides the driver for this. The problem with that driver is they are a bit old. (Both Intel and ATI). For example I doubt I have any gpu accel in flash, and I experience some problem with dual display setup, which the new ATI driver would solve. Basically I want to create a new driver (I read a topic where a guy said its possible... baaack then when I was searching for something else). One needs a special ATI driver creation utility or what... sorry I can't recall the name of it. Thanks in advance. (Ah yes I forgot: The OS is a Windows 7 x64 Ultimate.)

  Read the article

• Does cloud computing offer this? [closed]

  - by TheBlackBenzKid

  I have some newb questions I want answering please about cloud hosting - we are currently looking at Rackspace and getting a windows box. This is the situation: We have 15 computers in our office. We have 3 printers, some wifi and some network plugged. We have a standard router and the office share things via dropbox. The computers are not on Windows SBS or something similar. We want a cloud hosting solution that will offer User can login on any machine in the office and see the machine software User can login on any machine in the office and open Outlook and their emails and signature will be on exchange automatically A shared company folder on the network All printers automatically installed on the network Users can login remotely to access emails via the web At the moment we have a network company saying we need Xeon server in house with backup and psu and Windows SBS with license for each machine and also we need cabinets and cabling setup and also load balancers and modification of our DNS for emails. My question is this. Can cloud offer this? Can we have a server in the cloud that does this? Is it possible I mean the computers would be wireless connected to this cloud and you turn the machine on and its hosted?

  Read the article

• No Network Connection in WinXP image from Microsoft running on VirtualBox 3.1.6 OSE (Ubuntu 10.04) due to missing CD Rom

  - by Bevor

  I'd like to test local websites in IE7 and IE8.To do that I thought about using the free Microsoft images: http://www.microsoft.com/windowsxp/using/networking/setup/default.mspx I converted the VHDs to VDIs to make them run in VirtualBox. ( http://www.qc4blog.com/?p=721 ) This works fine. The problem is that in this Windows XP installation there is no Network Adapter configured. Actually nothing at all is configured because it needs the Windows XP CD Rom to do that. If I would have a Windows XP CD Rom, I would not need to run the Microsoft image, so is there some kind of workaround to get an internet connection? Meanwhile I set "bridged" in VirtualBox. But this doesn't help because "ipconfig /all" in the guest system doesn't show any data because nothing is configured. How can I get a connection to my local Apache (Host system). http://localhost would be enough. By the way: I can't install the "Guest additions". When I do that, the 3 days trial period of the guest system is suddenly gone, so I can't use it anymore and it is senseless. Any ideas? Update: I've tried the Vista image and it gets an internet connection. From Vista image I can get to my site with 192.168.1.3/mywebsite in the browser url. So actually I don't care about the WinXP issue anymore but I would be glad if anyone still knows a solution.

  Read the article

• Enterprise level Ticketing and inventory system reccomendations [closed]

  - by TrackingSystem

  My company is sort off at a stand still when it comes to our technician ticketing and inventory system. We currently use Numara TrackIt! - which isn't cutting it to say the least. Dell recommended KACE, but it's web based which is what we would like to avoid. We need a good ticketing and inventory system with the following: Server/Client setup Client supports XP/Windows 7 Ent. Web Based as well as Client is a plus Technician ticketing Active Directory integration Inventory System (Asset tag tracking etc/PO tracking) Exchange integrated - when tickets are made you have an option to send to the requester. Something that will scale well Please, if anyone is a Systems Admin or has knowledge regarding use of a great ticketing system please let me know. We have a large international corporation - price honestly isn't an issue. Keep in mind this will be mainly used for technicians to create tickets, enter inventory(track PCS) and possible even an option to track purchase orders. We want an enterprise level ticketing system with these capabilities please help! Thank you.

  Read the article

• Debian 7 and PHP 5.4.4 error reporting

  - by milovan

  I use default php.ini and then in my PHP script (local.settings.php in Drupal) I simply set ini_set('error_reporting', 'E_ALL & ~E_NOTICE & ~E_STRICT'); According to documentation this means "show all messages minus notice and strict warnings". But in my case it still shows strict warnings! I have no idea why, because I clearly stated "~E_STRICT". If I comment it out then I see strict warnings. So it means that default from php.ini "E_ALL & ~E_DEPRECATED & ~E_STRICT" didn't do its job as it also has "~E_STRICT" but I still see strict warnings. On Debian 6 there was Suhoshin patch which was controlling usage of php_ini in PHP scripts. Especially when you try to get more memory than defined cap. Now on debian 7 there is no Suhoshin nor any other security element that might control php_ini. So what might cause php_ini not to be executed? Is there some new variable / setup / other that needs to be checked?

  Read the article

• Windows 7 system freezes: would like to know if they could be related to MrxSmb, Event ID 8003 errors

  - by lifegoeson

  First, this question centers around a home network. Is it okay to ask here? Or should I go to SuperUser? (I see less answers over there, but I'll go there if that would be more appropriate.) Network setup: 1 Machine running XP Pro 1 Machine running Win7 Ultimate Comcast router Linksys WRT610N Wireless router The Win7 machine goes into a total, unrecoverable system freeze frequently. I was tearing out my hair trying to ascertain a cause, but I noticed that it usually seems to correspond with performing operations on the shared folders on the XP machine. The last 2 occasions that the Win7 machine froze, I saw this entry for Event ID 8003 from source MrxSmb in the Event log of the XP machine: The master browser has received a server announcement from the computer WIN7_COMPUTER that believes that it is the master browser for the domain on transport NetBT_Tcpip_{320B32A7-FED9. The master browser is stopping or an election is being forced. My question is twofold: Could this cause a Win7 system freeze? If so, what could I configure differently on my network to stop these conflicts over who is the master browser? Thank you for your help!

  Read the article

• Older monitor not working with HDMI to DVI cable (from ultrabook)

  - by ShellfishGene

  I have a Lenovo Yoga ultrabook which only has a HDMI port. I bought an HDMI to DVI cable, and it works as expected with a LG monitor in my office. As soon as I plug it in the screen is cloned. At home I have an older Dell UltraSharp 2005fp, and for that one it does not work. When I plug the cable in "something" happens, the monitor goes from the "no signal" screen to black. On the laptop however nothing happens. In the Windows 8 display setup I don't have another monitor, clicking "detect" does not find one either. I can manually set a second display for cloning or extending, but never get a picture on the Dell. Connecting my media player thing with the cable to the Dell monitor works for when the player displays it's logo at a low resolution, but when it goes into 750p mode after booting the picture also goes away. Mabye that's due to HDCP though. Any ideas? Something to do with Windows 8, or DVI versions?

  Read the article

• Redirect without changing URL

  - by Coobadivin

  Here's the setup. We have a hardware load balancer with an http virtual cluster. Let's call this virtual cluster example1.com. This virtual cluster load balances between two squid reverse proxies which are also on the same physical servers as the web servers. Squid listens on 80 and points to itself as the cache_peer web server which listens on 81. We also have a standalone web server which we will call example2.com. What we are trying to do is create a subdirectory on example1.com called example1.com/example2. This will point to example2.com, but we want our users to stay at example1.com/example2 in their browser. So, it's like a redirect without actually being a redirect. How the hell do I go about doing this? Is this even possible? I'm looking at squid docs in the meantime. example1.com is running a proprietary web server - not Apache :( We can't host example2.com's content in example1.com's file system. These are two very different platforms.

  Read the article

• Subversion: Secure connection truncated

  - by Nick

  Hi, I'm trying to set-up a subversion server with apache2/webdav access. I've created the repository and configure Apache according to the official book, and I can see the repository in a webbrowser. The browser shows: conf/ db/ hooks/ locks/ Although clicking any of those links gives an empty xml document like: <D:error> <C:error/> <m:human-readable errcode="2"> Could not open the requested SVN filesystem </m:human-readable> </D:error> I've never used subversion before so I assume this is correct? Anyway, when I try to connect via a command line client, it asks for my password, I give it, then I get the (useless) error message: svn: OPTIONS of 'https://svn.mysite.com': Could not read status line: Secure connection truncated (https://svn.mysite.com) The command I'm using is: svn checkout https://svn.mysite.com/ svn.mysite.com Subversion was installed using Ubuntu's package manager. It's version 1.6.6 on Ubuntu 10.04. My Virtualhost Cofiguration: <VirtualHost 123.123.12.12:443> ServerAdmin [email protected] ServerName svn.mysite.com <Location /> DAV svn SVNParentPath /var/svn/repos SVNListParentPath On AuthType Basic AuthName "Subversion Repository" AuthUserFile /etc/subversion/passwd Require valid-user </Location> # Setup The SSL Certificate Paths SSLEngine On SSLCertificateFile /etc/ssl/certs/mysite.com.crt SSLCertificateKeyFile /etc/ssl/private/dmysite.com.key </VirtualHost>

  Read the article

• Windows 8 Killed my SSDs

  - by SLaks

  I have a computer running 2 256GB Crucial M4's (CT256M4SSD2) in a RAID 0 (striped) array on an ASUS P9X79 Pro using Intel's (built-in) RAID system. I recently installed Windows 8 Pro as UEFI on this RAID array. (wiping a fully-function Windows 7 non-UEFI installation) Now, whenever the computer is left running for about an hour, the system no longer sees those drives. Since those drives contain Windows, this leads to various forms of BSODs. If I Intel RSTe (RAID manager) is running at the time, it will say that the disk backing that RAID array has been removed. Once this happens, if I reset the computer, it will no longer boot. Entering BIOS setup shows that the SATA 3 (6Gbps) ports that those disks are connected to are both empty. If I then power down the system completely, then turn it on again, the drives reappear, but the problem repeats after another hour or so. I have inconclusively determined that the problem occurs even if Windows is not running (booted into the installation environment from a UEFI flash drive) I don't think there has been any data corruption since this started happening, although I have had two strange issues with a GIT repo on that disk. sfc /ScanNow and Intel's disk check (in RSTe) both do not find anything. Does anyone know what might cause this?

  Read the article

• Server down at 23:26 every night

  - by miccet

  We are having a big problem with our sites stability the last couple of weeks and after endless hours of troubleshooting I don't get anywhere. So I turn to you dear community. Setup: 2 x VPS servers - Front end, 8 core, 8G RAM. - Database, 5 core, 3G RAM. Both running Ubuntu. Ruby on Rails EE with Passenger 3 and Rails 2.3.11. MySQL 5.1.67. The problem is that each night, at the exact same time (23:26) the SQL server suddenly shows a processlist full of COMMIT with an increasing Time. After 30-40 seconds (can go longer) a wave seems processed and the site responds for a few seconds before it repeats. During this hick up the database server load spikes while the front end is relaxing. I have looked at slow queries, but is not finding any locks or other unusual queries ran at this time. I have looked at iotop at the time of the halt and there is no activity from mysql. I also tried turning off query_cache and messed around with the mysql configuration file without much change. Any ideas?

  Read the article

• How are large companies handling the storing and cataloging of software installation disks?

  - by CT

  I just started working in the IT department of a small-medium sized construction company with about 200 users. One of my responsibilities is to setup and configure all new machines that come in. I would like suggestions on how to best manage the installation disks and licenses of the software that comes with them. Plus any additional licensed software such as Autocad, Photoshop, etc as well as peripheral driver disks such as printers and scanners. Right now every machine is associated and labeled with an asset id. All asset ids are kept in a spreadsheet with applicable serial numbers, current user, warranty info, and software licenses. The physical disks are then kept within a folder in a cabinet. Each folder is marked with the asset id number as well as the current user. My problems with this is that the system was not maintained very completely before I came to the company. There are plenty of software folders with no asset ids labeled on them. Plenty of missing software folders (most likely are a lot of the unlabeled folders). Folders with names but not asset ids. Machines get switched to different users without the folders and spreadsheet being updated. I am not saying this method would necessarily be bad if it was better implemented and managed, but if I am going to have to take a lot of time to fix this system currently in place. I thought I would ask the community first on how others manage this process in case there are easier, more efficient ways of doing so. Thank you.

  Read the article

• Is is possible to guide installation of new programs using %ProgramFiles%? [closed]

  - by ??????? ???????????

  The purpose of this is to have the default "program files" (32 and 64 bit) folders located under an arbitrary path, possibly on a drive separate from where windows lives. Initially I thought that this may be done using a system environment variable through the dialog located under Control Panel - System - Advanced - Environment Variables. These variables turned out to be set in the registry under the key HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion. However, one particular entry is confusing. The ProgramFilesPath entry seems to point at an environment variable that is not defined under the same registry key. I could assume that the difference between ProgramFilesDir and ProgramFilesPath is none and that one of them exists as a backwards compatibility, but having some legitimate resource from Microsoft to look at would be better than guessing. After receiving some worrying feedback about having both 32 and 64bit applications in the same folder, I have decided not to ask about the feasibility of this to avoid discussion. The real question is if the desired effect is possible to attain by "cutting into" the windows setup process and modifying those registry entries as early as possible. These settings should be system wide and not only for software installed by a particular user. If this is indeed something that can be done, I wonder if there are any subtle pitfalls. Programs that expect libraries and other resources to be in default locations can probably be dealt with using the same technique as employed by Windows to re-map the "Documents and Settings" folders and the like (i.e. breaking legacy applications is not real concern).

  Read the article

• Exchange 2007 Backup - For a newbie

  - by mew3900

  I am trying to setup an exchange 2007 backup solution. After doing a lot of reading, Microsoft have decided in server 2008 unless you are willing to spend a great deal on a 3rd party solution you are pretty stuck! Essentially what I have been asked to do is perform an off-line file backup of our current exchange server and replicate this onto a new 2nd server. The reasoning behind this is that we need to upgrade our current installation of exchange 2007 to SP2 so that the exchange plug-in for windows server backup will be available to us. From this I can then actually take an exchange aware backup weekly and take it off site. Ideally then also we can migrate to this new server and keep the old one as a fail over. Is there a way I can copy across the files required onto a second server, although I doubt very much it is that simple. I may be barking up completely the wrong tree, however I have very limited knowledge with Exchange and any help and advice on how I would resolve this would be much appreciated. Thanks in advance

  Read the article

• VLAN across a router to give wireless access to remote sites?

  - by Don

  I've been looking online for this answer, but getting conflicting information. I was under the impression that you couldn't use a VLAN across a router, but maybe it's possible (according to some documentation I see online)? I was hoping someone could clear it up for me. Here's what I'm working with: We have a remote site with a handful of users. We recently gave them an access point (Cisco 1142n) for internal wireless. It's plugged into a switch and working fine (getting IPs from the same DHCP scope as the wired users are getting). Private wireless is set on VL50. At the home office we have private wireless for our internal network working and on VL50, with a test VLAN setup for VL60, which points to our DSL line for the time being. Both private and public wireless works fine internally (not crossing a router). VL50 is named the same at both sites for consistency in naming. If we wanted to give the remote site access to the public wireless (VL60), would that be possible across the routers? For more information, currently the site is connected to the home office via a T1 connection, Cisco routers on both ends. I didn't think it was possible due to the nature of VLANS being layer 2. But, I am from from an expert on this and would appreciate any instruction as to the actual truth of the matter. The end result I'm going for is, how to get our remote sites access to a public (outside) connection along with their private connection, without actually having a DSL (or similar type line) dropped at their location? Thanks in advance for your thoughts.

  Read the article

• Nginx vhost configuration

  - by user101494

  I am attempting to setup a new server with Nginx 1.0.10 on debian 6. The config below works perfectly on a server with nginx 0.8.36 on Ubuntu 10.04.3 but not on the new box. The desired result is to: Redirect non-www request on the tld to www, but not not subdomains Use the the folder structure /var/www/[domain]/htdocs /var/www/[domain]/subdomains/[subdomain]/htdocs Serve files any host for which files exist in this structure On the new server domains are matching correctly but subdomains are matching to /var/www/[subdomain].[domain]/htdocs not /var/www/[domain]/subdomains/[subdomain]/htdocs server { listen 80; server_name _________ ~^[^.]+\.[^.]+$; rewrite ^(.*)$ $scheme://www.$host$1 permanent; } server { listen 80; server_name _ ~^www\.(?<domain>.+)$; server_name_in_redirect off; location / { root /var/www/$domain/htdocs; index index.html index.htm index.php; fastcgi_index index.php; } location ~ \.php$ { include /etc/nginx/fastcgi_params; keepalive_timeout 0; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } location ~ /\.ht { deny all; } } server { listen 80; server_name __ ~^(?<subdomain>\.)?(?<domain>.+)$$; server_name_in_redirect off; location / { root /var/www/$domain/subdomains/$subdomain/htdocs; index index.html index.htm index.php; fastcgi_index index.php; } location ~ \.php$ { include /etc/nginx/fastcgi_params; keepalive_timeout 0; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } location ~ /\.ht { deny all; } }

  Read the article

• Inexpensive (used) hardware for Xen virtualization test?

  - by Jason Antman

  Virtualization is one of the areas where I could really use some experience. I also run quite a few services (web, mail, dns, etc.) out of my home. Since most of my hardware is getting a bit old (I'm running on stuff that was surplused years ago...) I decided that it's about time I start renewing some things, and also play around with virtualization a bit more. My plan is to setup a SAN box (simple iSCSI target, relatively inexpensive gigE switch), get a pair (for starters) of new servers, and start building some new stuff with Xen, specifically planning on playing with live migration and full virtualization. Does anyone have recommendations for used, older "servers" (really anything in a rack-mount form factor, I'm not too worried about things like iLO/iLOM for the test nodes) that support VT-x/AMD-V? I'm biased to HP, but it looks like they didn't make Proliants with VT-x/Vanderpool processors until G6 (for the DL360) or so, which is way out of my price range. I'm looking in the sub-$300 range (or less, if possible), used, probably Ebay. Any recommendations are greatly appreciated. Edit:And, to catch this before the comments start coming - these are personal systems. I have first-generation Proliants still in use (I got them as corporate surplus in 05, they've been running since then, and probably were running since 01 or 02 prior to being sold). I don't need anything shiny and new - I've got a bunch of old boxes, at least one complete replacement for every model in use, and that's fine for me (and easy on the wallet).

  Read the article

• How to diagnose computer freezing problem

  - by reinierpost

  I have a laptop (a Medion from Aldi) that tends to hang quite often - so often, in fact, that several attempts to install Windows XP or Ubuntu on it have all failed. However, I am able to boot and run Ubuntu as found on the standard Ubuntu 10.10 installation image. I have done this two times thus far. The first time everything was running smoothly, until at some point the GUI (i.e. X) became unresponsive. The cursor kept moving with the mouse, but menus would no longer show and clicking things no longer produced any response. So I switched to the consoles (Ctrl-F1, Ctrl-F2, etc., which in this setup automatically run shells. The shells were still responsive, and the cd command would still work, but any command that invoked an executable (e.g. /bin/ls or cd /bin; ./find caused the shell to hang up uninterruptibly. My hypothesis was that all attempts at disk access were hanging up, but I didn't actually try a command like echo /proc/$$ or while read line; do echo $line; done < /var/log/syslog to verify this. Another possibility is that an essential system library is cached in memory and somehow failing to function properly. The second time I left the system running overnight and it didn't hang itself spontaneously. I'm not sure I have the patience to just twiddle with the running system until the condition reappears, and I'm, not sure what to do once it does. Clearly we can rule out a software cause. It seems disk access related, but clearly it's not permanent hard disk failure because the system will reboot just fine. What kind of hardware problem might produce these symptoms? Can it be a memory problem?

  Read the article

• CentOS and OpenSSH [on hold]

  - by Stephen

  I've recently installed CentOS 6 on an old Dell PC. I'm trying to setup OpenSSH at the moment, I been following some tutorials (http://www.youtube.com/watch?v=QKafb0koJEg) on You Tube, while they have been very helpful I'm at the point where I need to ask some questions. My goal here is to be able to access the server from my work computer and from my personal laptop (which will be on the same home network as the server). I've installed OpenSSH with no issues. So the first thing I was advised to do was port forwarding. So in the sshd_config file, I've changed Port 22 to Port xxxx (where xxxx is a obviously a four digit value). I then restart the sshd service. I've also configured my router for forward port 22 onto xxxx. Is there anything else I need to do? I've generated the keys on my laptop, and I'm trying to copy them to the server as follows: scp id_rsa.pub xxxxxxxx@localhost:.ssh/authorized_keys but this command fails with the following error message: ssh: connect to host localhost port 22: Connection refused lost connection Any help appreciated. Regards...

  Read the article

• mod_rewrite and Apache questions

  - by John

  We have an interesting situation in relation to some help desk software that we are trying to setup. This is a web based software application that allows customers and staff to log into it and access tickets and supply updates, etc. The challenge we are having deals with the two different domains that we use and the mod_rewrite rules to make it all work with our SSL certificate that is only bound to one of the domains. I will list the use case scenarios below and the challenges that we are having. If you access http://support.domain1.com/support then it redirects fine to https://support.domain2.com/support If you access http://support.domain2.com/support then it redirects fine to https://support.domain2.com/support If you access https://support.domain1.com/support then it throws an error of "server cannot be found" If you access https://support.domain1.com/support/ after having visited https://support.domain2.com/support then you are presented with a "this connection is untrusted" error about the certificate only being valid for the domain2 domain instead of the domain1 domain name I have tried just about every mod_rewrite rule that I can think of to help make this work and I have not been able to locate the correct combination. I was curious if anyone had some ideas on how to make the redirects work correctly. In the end, we are needing all customers and staff to land at https://support.domain2.com/support regardless of the previous URL combinations that they enter, like listed above. Thanks in advance for your help with this.

  Read the article

• Hosting options for data-enabled web application

  - by Hertfordian

  I am independently developing an asp.net business application with a MySQL database. I currently have a Windows web hosting account which includes MySQL and MS SQL as installed supported options. I am not yet finally committed to using MySQL and I want to keep my options open to evaluate MS SQL and possibly other options such as PostGreSQL later when more of the business logic is in place - my data access layer will handle the database connectivity. The web hosting setup I have now is fine for development purposes, but if in future I want to use, say, PostGreSQL Server, and a level of usage of, say, 10,000 hits per day concentrated in business hours, I'm assuming I'll need a dedicated server. But in that case, should I just install PostGreSQL on the dedicated server, or is best practice to have a separate database server - perhaps locked down so that it can only be accessed through the web server? And supposing it was only 2000 hits a day - how would that change things? I'd appreciate it if anyone could point me in the direction of a useful guide to these sorts of issues. Naturally if I start paying for separate servers, I would like to know exactly why I'm doing it and what the performance issues and thresholds are.

  Read the article

• Virtual host Alias not routing properly

  - by Jacob

  I apologize if this question has been asked many times in the past. I am not 100% sure of the exact cause of my issue and am out of google magic right now. Basically I have a virtual host file setup with an Alias record that points to a different directory other the document root. It basically looks like this <VirtualHost *:80> ServerName iBusinessCentral.com ServerAdmin [email protected] DocumentRoot /var/www/marketingsites/ ServerAlias iBusinessCentral.com *.iBusinessCentral.com Alias /unsub "/var/www/unsub/site_index/" </VirtualHost> When I navigate to ibusinesscentral.com/unsub/?randomquerystring I am directed to the correct folder. If I remove the query string and navigate to ibusinesscentral.com/unsub/ I am taken to the directory in the document root. The unsub directory is a zend application and I need to be able to navigate to different url paths like ibusinesscentral.com/unsub/unenroll?querystring I have tried using AliasMatch instead of Alias. I have also tried adding a slash after the unsub portion of the Alias record, and have not had any luck to this point. Thanks in advance for any assistance

  Read the article

• Why can I not edit, delete directories inside of this directory

  - by user43053

  Hello there, First, I thought this was PHP related, but maybe it isn't. My original post, which may be irrelevant now is located at the bottom. The problem is I have a directory : /articles/. In it are 10 sub directories. I have been changing the permissions lately, but now it seems all the permissions of the parent folder, sub-folders and files are either chmod 755 or 777. I cannot move, delete or edit files inside of this parent directory or sub-directories with my FTP-client. I can however edit, delete, create new files and directories and change them with PHP-functions without problems. What may the problem be? OLD POST. Ignore everything below this line: If I create a directory with mkdir(), or create a file with fopen(), file_put_contents() or SimpleXMLElement::asXML(), I am unable to access the file with my FTP-client or c-Panel File Manager. If I try to delete or edit them, I get errors. Dreamweaver suggests it is a permission problem or a network or filesystem fault (but I've set the permissions with chmod() to 0777, and when I check the cPanel, it confirms chmod 777. I also tried to use fileowner() and the function returns int(99), the same owner as those files that I could access with my FTP-client. It seems files and directories created with PHP can only be modified or be deleted with PHP. I thought this must be a server setup related issue, so I write it here. I am on a shared server, and I have no idea about setting up servers. EDIT: It seems the problem is different. I cannot move files with FTP-client to the parent, or sub-directories either. This problem may not be PHP related, then. It seems the problem applies to any directory, regardless of whether it was created by PHP. EDIT 2: The parent directory has chmod 755. Thank you for your time. Kind regards Marius

  Read the article

• SATA disks boot order?

  - by kire

  I have a computer with 4 SATA disks connected, 2 to the motherboard and 2 to a PCI-card. I've moved all the disks from other computers so 2 of them already has windows installed, the other 2 has just had data on them. I know one of the windows installations works and i want to use this install. If i only have this disk connected the computer boots fine. The problem is that when i boot with all 4 disks connected i get an error message about not being able to boot. This message is in swedish(the wrong windows installation is swedish) so it has to come from that installation. Ok, that means it is trying to boot from wrong disk, i try to pull out that disk but then i get the same error in english. I pull out the fourth disk instead I get another error about NTLDR not being able to load. If i disconnect all drives except the one with the correct windows installation, windows boots fine and i can also connect the other drives while windows is running and browse around in them without any problems. I have no clue what to do. In my BIOS setup i can only select SATA as boot-option, not the order of the disks. I also tried to remove what's left of windows on the other disk by simply deleting everything in explorer(got hidden- and sytstem-files visible). Both windows installations are XP btw. Edit: I switched the cables around and now it magically works. :)

  Read the article

< Previous Page | 506 507 508 509 510 511 512 513 514 515 516 517  | Next Page >