Search Results

Search found 14184 results on 568 pages for 'peter small'.

Page 512/568 | < Previous Page | 508 509 510 511 512 513 514 515 516 517 518 519  | Next Page >

• PASS: Board Q&amp;A at the Summit

  - by Bill Graziano

  The last two years we’ve put the Board in front of the members and taken questions.  We’re going to do that again this year.  It will be in Room 307/308 from 12:15 to 1:30 on Friday. Yes, this time overlaps with the Birds of a Feather Lunch and the start of afternoon sessions – but only partially.  You can attend the Q&A and still get to parts of both of those.  There just isn’t a great time to do this.  Every time overlaps with something. We can’t do it after the last session on Friday.  We can’t fit it between the last session and the evening events on Wednesday or Thursday.  We had some discussion around breakfast time but I didn’t think that was realistic.  This is the least bad time we could come up with. Last year we had 60-70 people attend.  These are the items that were specific things that I could work on: The first question was whether to increase transparency around individual votes of Board members.  We approved this at the Board meeting the following day.  The only caveat was that if the Board is given confidential information as a basis for their vote then we may not be able to disclose individual votes.  Putting a Director in a position where they can’t publicly defend the reason for their vote is a difficult situation.  Thanks Kendal! Can we have a Board member discretionary fund?  As background, I took a couple of people to lunch so we could have a quiet place to talk.  I bought lunch but wasn’t able to expense it back to PASS.  We just don’t have a budget item for things like this.  I think we should.  I would guess the entire Board would like it also.  It was in an earlier version of the budget but came out as part of a cost-cutting move to balance the budget.  I’d like to see it added back in but we’ll have to see. I know there were a comments about the elections.  At this point we had created the Election Review Committee.  I’ve already written at length about this process. Where does IT work go?  PASS started to publish our internal management reports starting in December 2010.  You can find them on our Governance page.  These aren’t filtered at all and include a variety of information about IT projects.  The most recent update had roughly a page of updates related to IT.  Lots of the work was related to Summit and the Orator tool that we use to manage speaker submissions. There were numerous requests that Tina Turner not be repeated.  Done.  I don’t think we’ll do anything quite like that again.  We had a request for a payment plan for Summit.  We looked into this briefly but didn’t take any action.  We didn’t think the effort was worth the small number of people that would use it.  If you disagree, submit this on our Summit Feedback site and get some votes. There were lots of suggestions around the first-timers events – especially from first timers.  You can find all our current activities related to first-timers at the First Timers page on the Summit web site.  Plus links to 34 (!) blog posts on suggestions for first-timers.  And a big THANK YOU to Confio and Red Gate for sponsoring this. I hope you get the chance to attend.  These events are very helpful to me as a Board member.  I like being able to look around the room as comments are being made and see the audience reaction.  It helps me gauge the interest in an idea. I’d also like to direct you to the Summit Feedback site.  You can submit and vote on ideas to make the Summit a better experience.  As of right now we have the suggestions from last year still up.  We may reset these prior to the Summit though.

  Read the article

• 5 Android Keyboard Replacements to Help You Type Faster

  - by Chris Hoffman

  Android allows developers to replace its keyboard with their own keyboard apps. This has led to experimentation and great new features, like the gesture-typing feature that’s made its way into Android’s official keyboard after proving itself in third-party keyboards. This sort of customization isn’t possible on Apple’s iOS or even Microsoft’s modern Windows environments. Installing a third-party keyboard is easy — install it from Google Play, launch it like another app, and it will explain how to enable it. Google Keyboard Google Keyboard is Android’s official keyboard, as seen on Google’s Nexus devices. However, there’s a good chance your Android smartphone or tablet comes with a keyboard designed by its manufacturer instead. You can install the Google Keyboard from Google Play, even if your device doesn’t come with it. This keyboard offers a wide variety of features, including a built-in gesture-typing feature, as popularized by Swype. It also offers prediction, including full next-word prediction based on your previous word, and includes voice recognition that works offline on modern versions of Android. Google’s keyboard may not offer the most accurate swiping feature or the best autocorrection, but it’s a great keyboard that feels like it belongs in Android. SwiftKey SwiftKey costs $4, although you can try it free for one month. In spite of its price, many people who rarely buy apps have been sold on SwiftKey. It offers amazing auto-correction and word-prediction features. Just mash away on your touch-screen keyboard, typing as fast as possible, and SwiftKey will notice your mistakes and type what you actually meant to type. SwiftKey also now has built-in support for gesture-typing via SwiftKey Flow, so you get a lot of flexibility. At $4, SwiftKey may seem a bit pricey, but give the month-long trial a try. A great keyboard makes all the typing you do everywhere on your phone better. SwiftKey is an amazing keyboard if you tap-to-type rather than swipe-to-type. Swype While other keyboards have copied Swype’s swipe-to-type feature, none have completely matched its accuracy. Swype has been designing a gesture-typing keyboard for longer than anyone else and its gesture feature still seems more accurate than its competitors’ gesture support. If you use gesture-typing all the time, you’ll probably want to use Swype. Swype can now be installed directly from Google Play without the old, tedious process of registering a beta account and sideloading the Swype app. Swype offers a month-long free trial and the full version is available for $1 afterwards. Minuum Minuum is a crowdfunded keyboard that is currently still in beta and only supports English. We include it here because it’s so interesting — it’s a great example of the kind of creativity and experimentation that happens when you allow developers to experiment with their own forms of keyboard. Minuum uses a tiny, minimum keyboard that frees up your screen space, so your touch-screen keyboard doesn’t hog your device’s screen. Rather than displaying a full keyboard on your screen, Minuum displays a single row of letters.  Each letter is small and may be difficult to hit, but that doesn’t matter — Minuum’s smart autocorrection algorithms interpret what you intended to type rather than typing the exact letters you press. Just swipe to the right to type a space and accept Minuum’s suggestion. At $4 for a beta version with no trial, Minuum may seem a bit pricy. But it’s a great example of the flexibility Android allows. If there’s a problem with this keyboard, it’s that it’s a bit late — in an age of 5″ smartphones with 1080p screens, full-size keyboards no longer feel as cramped. MessagEase MessagEase is another example of a new take on text input. Thankfully, this keyboard is available for free. MessagEase presents all letters in a nine-button grid. To type a common letter, you’d tap the button. To type an uncommon letter, you’d tap the button, hold down, and swipe in the appropriate direction. This gives you large buttons that can work well as touch targets, especially when typing with one hand. Like any other unique twist on a traditional keyboard, you’d have to give it a few minutes to get used to where the letters are and the new way it works. After giving it some practice, you may find this is a faster way to type on a touch-screen — especially with one hand, as the targets are so large. Google Play is full of replacement keyboards for Android phones and tablets. Keyboards are just another type of app that you can swap in. Leave a comment if you’ve found another great keyboard that you prefer using. Image Credit: Cheon Fong Liew on Flickr     

  Read the article

• Telerik Releases a new Visual Entity Designer

  Love LINQ to SQL but are concerned that it is a second class citizen? Need to connect to more databases other than SQL Server? Think that the Entity Framework is too complex? Want a domain model designer for data access that is easy, yet powerful? Then the Telerik Visual Entity Designer is for you. Built on top of Telerik OpenAccess ORM, a very mature and robust product, Teleriks Visual Entity Designer is a new way to build your domain model that is very powerful and also real easy to use. How easy? Ill show you here. First Look: Using the Telerik Visual Entity Designer To get started, you need to install the Telerik OpenAccess ORM Q1 release for Visual Studio 2008 or 2010. You dont need to use any of the Telerik OpenAccess wizards, designers, or using statements. Just right click on your project and select Add|New Item from the context menu. Choose Telerik OpenAccess Domain Model from the Visual Studio project templates. (Note to existing OpenAccess users, dont run the Enable ORM wizard or any other OpenAccess menu unless you are building OpenAccess Entities.) You will then have to specify the database backend (SQL Server, SQL Azure, Oracle, MySQL, etc) and connection. After you establish your connection, select the database objects you want to add to your domain model. You can also name your model, by default it will be NameofyourdatabaseEntityDiagrams. You can click finish here if you are comfortable, or tweak some advanced settings. Many users of domain models like to add prefixes and suffixes to classes, fields, and properties as well as handle pluralization. I personally accept the defaults, however, I hate how DBAs force underscores on me, so I click on the option to remove them. You can also tweak your namespace, mapping options, and define your own code generation template to gain further control over the outputted code. This is a very powerful feature, but for now, I will just accept the defaults.   When we click finish, you can see your domain model as a file with the .rlinq extension in the Solution Explorer. You can also bring up the visual designer to view or further tweak your model by double clicking on the model in the Solution Explorer.  Time to use the model! Writing a LINQ Query Programming against the domain model is very simple using LINQ. Just set a reference to the model (line 12 of the code below) and write a standard LINQ statement (lines 14-16).  (OpenAccess users: notice the you dont need any using statements for OpenAccess or an IObjectScope, just raw LINQ against your model.) 1: using System; 2: using System.Linq; 3: //no need for anOpenAccess using statement 4:   5: namespace ConsoleApplication3 6: { 7: class Program 8: { 9: static void Main(string[] args) 10: { 11: //a reference tothe data context 12: NorthwindEntityDiagrams dat = new NorthwindEntityDiagrams(); 13: //LINQ Statement 14: var result = from c in dat.Customers 15: where c.Country == "Germany" 16: select c; 17:   18: //Print out the company name 19: foreach (var cust in result) 20: { 21: Console.WriteLine("CompanyName: " + cust.CompanyName); 22: } 23: //keep the consolewindow open 24: Console.Read(); 25: } 26: } 27: } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Lines 19-24 loop through the result of our LINQ query and displays the results. Thats it! All of the super powerful features of OpenAccess are available to you to further enhance your experience, however, in most cases this is all you need. In future posts I will show how to use the Visual Designer with some other scenarios. Stay tuned. Enjoy! Technorati Tags: Telerik,OpenAccess,LINQ Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Scripting Part 1

  - by rbishop

  Dynamic Scripting is a large topic, so let me get a couple of things out of the way first. If you aren't familiar with JavaScript, I can suggest CodeAcademy's JavaScript series. There are also many other websites and books that cover JavaScript from every possible angle.The second thing we need to deal with is JavaScript as a programming language versus a JavaScript environment running in a web browser. Many books, tutorials, and websites completely blur these two together but they are in fact completely separate. What does this really mean in relation to DRM? Since DRM isn't a web browser, there are no document, window, history, screen, or location objects. There are no events like mousedown or click. Trying to call alert('hello!') in DRM will just cause an error. Those concepts are all related to an HTML document (web page) and are part of the Browser Object Model or Document Object Model. DRM has its own object model that exposes DRM-related objects. In practice, feel free to use those sorts of tutorials or practice within your browser; Many of the concepts are directly translatable to writing scripts in DRM. Just don't try to call document.getElementById in your property definition!I think learning by example tends to work the best, so let's try getting a list of all the unique property values for a given node and its children. var uniqueValues = {}; var childEnumerator = node.GetChildEnumerator(); while(childEnumerator.MoveNext()) { var propValue = childEnumerator.GetCurrent().PropValue("Custom.testpropstr1"); print(propValue); if(propValue != null && propValue != '' && !uniqueValues[propValue]) uniqueValues[propValue] = true; } var result = ''; for(var value in uniqueValues){ result += "Found value " + value + ","; } return result;  Now lets break this down piece by piece. var uniqueValues = {}; This declares a variable and initializes it as a new empty Object. You could also have written var uniqueValues = new Object(); Why use an object here? JavaScript objects can also function as a list of keys and we'll use that later to store each property value as a key on the object. var childEnumerator = node.GetChildEnumerator(); while(childEnumerator.MoveNext()) { This gets an enumerator for the node's children. The enumerator allows us to loop through the children one by one. If we wanted to get a filtered list of children, we would instead use ChildrenWith(). When we reach the end of the child list, the enumerator will return false for MoveNext() and that will stop the loop. var propValue = childEnumerator.GetCurrent().PropValue("Custom.testpropstr1"); print(propValue); if(propValue != null && propValue != '' && !uniqueValues[propValue]) uniqueValues[propValue] = true; } This gets the node the enumerator is currently pointing at, then calls PropValue() on it to get the value of a property. We then make sure the prop value isn't null or the empty string, then we make sure the value doesn't already exist as a key. Assuming it doesn't we add it as a key with a value (true in this case because it makes checking for an existing value faster when the value exists). A quick word on the print() function. When viewing the prop grid, running an export, or performing normal DRM operations it does nothing. If you have a lot of print() calls with complicated arguments it can slow your script down slightly, but otherwise has no effect. But when using the script editor, all the output of print() will be shown in the Warnings area. This gives you an extremely useful debugging tool to see what exactly a script is doing. var result = ''; for(var value in uniqueValues){ result += "Found value " + value + ","; } return result; Now we build a string by looping through all the keys in uniqueValues and adding that value to our string. The last step is to simply return the result. Hopefully this small example demonstrates some of the core Dynamic Scripting concepts. Next time, we can try checking for node references in other hierarchies to see if they are using duplicate property values.

  Read the article

• Cloud to On-Premise Connectivity Patterns

  - by Rajesh Raheja

  Do you have a requirement to convert an Opportunity in Salesforce.com to an Order/Quote in Oracle E-Business Suite? Or maybe you want the creation of an Oracle RightNow Incident to trigger an on-premise Oracle E-Business Suite Service Request creation for RMA and Field Scheduling? If so, read on. In a previous blog post, I discussed integrating TO cloud applications, however the use cases above are the reverse i.e. receiving data FROM cloud applications (SaaS) TO on-premise applications/databases that sit behind a firewall. Oracle SOA Suite is assumed to be on-premise with with Oracle Service Bus as the mediation and virtualization layer. The main considerations for the patterns are are security i.e. shielding enterprise resources; and scalability i.e. minimizing firewall latency. Let me use an analogy to help visualize the patterns: the on-premise system is your home - with your most valuable possessions - and the SaaS app is your favorite on-line store which regularly ships (inbound calls) various types of parcels/items (message types/service operations). You need the items at home (on-premise) but want to safe guard against misguided elements of society (internet threats) who may masquerade as postal workers and vandalize property (denial of service?). Let's look at the patterns. Pattern: Pull from Cloud The on-premise system polls from the SaaS apps and picks up the message instead of having it delivered. This may be done using Oracle RightNow Object Query Language or SOAP APIs. This is particularly suited for certain integration approaches wherein messages are trickling in, can be centralized and batched e.g. retrieving event notifications on an hourly schedule from the Oracle Messaging Service. To compare this pattern with the home analogy, you are avoiding any deliveries to your home and instead go to the post office/UPS/Fedex store to pick up your parcel. Every time. Pros: On-premise assets not exposed to the Internet, firewall issues avoided by only initiating outbound connections Cons: Polling mechanisms may affect performance, may not satisfy near real-time requirements Pattern: Open Firewall Ports The on-premise system exposes the web services that needs to be invoked by the cloud application. This requires opening up firewall ports, routing calls to the appropriate internal services behind the firewall. Fusion Applications uses this pattern, and auto-provisions the services on the various virtual hosts to secure the topology. This works well for service integration, but may not suffice for large volume data integration. Using the home analogy, you have now decided to receive parcels instead of going to the post office every time. A door mail slot cut out allows the postman can drop small parcels, but there is still concern about cutting new holes for larger packages. Pros: optimal pattern for near real-time needs, simpler administration once the service is provisioned Cons: Needs firewall ports to be opened up for new services, may not suffice for batch integration requiring direct database access Pattern: Virtual Private Networking The on-premise network is "extended" to the cloud (or an intermediary on-demand / managed service offering) using Virtual Private Networking (VPN) so that messages are delivered to the on-premise system in a trusted channel. Using the home analogy, you entrust a set of keys with a neighbor or property manager who receives the packages, and then drops it inside your home. Pros: Individual firewall ports don't need to be opened, more suited for high scalability needs, can support large volume data integration, easier management of one connection vs a multitude of open ports Cons: VPN setup, specific hardware support, requires cloud provider to support virtual private computing Pattern: Reverse Proxy / API Gateway The on-premise system uses a reverse proxy "API gateway" software on the DMZ to receive messages. The reverse proxy can be implemented using various mechanisms e.g. Oracle API Gateway provides firewall and proxy services along with comprehensive security, auditing, throttling benefits. If a firewall already exists, then Oracle Service Bus or Oracle HTTP Server virtual hosts can provide reverse proxy implementations on the DMZ. Custom built implementations are also possible if specific functionality (such as message store-n-forward) is needed. In the home analogy, this pattern sits in between cutting mail slots and handing over keys. Instead, you install (and maintain) a mailbox in your home premises outside your door. The post office delivers the parcels in your mailbox, from where you can securely retrieve it. Pros: Very secure, very flexible Cons: Introduces a new software component, needs DMZ deployment and management Pattern: On-Premise Agent (Tunneling) A light weight "agent" software sits behind the firewall and initiates the communication with the cloud, thereby avoiding firewall issues. It then maintains a bi-directional connection either with pull or push based approaches using (or abusing, depending on your viewpoint) the HTTP protocol. Programming protocols such as Comet, WebSockets, HTTP CONNECT, HTTP SSH Tunneling etc. are possible implementation options. In the home analogy, a resident receives the parcel from the postal worker by opening the door, however you still take precautions with chain locks and package inspections. Pros: Light weight software, IT doesn't need to setup anything Cons: May bypass critical firewall checks e.g. virus scans, separate software download, proliferation of non-IT managed software Conclusion The patterns above are some of the most commonly encountered ones for cloud to on-premise integration. Selecting the right pattern for your project involves looking at your scalability needs, security restrictions, sync vs asynchronous implementation, near real-time vs batch expectations, cloud provider capabilities, budget, and more. In some cases, the basic "Pull from Cloud" may be acceptable, whereas in others, an extensive VPN topology may be well justified. For more details on the Oracle cloud integration strategy, download this white paper.

  Read the article

• Cloud to On-Premise Connectivity Patterns

  - by Rajesh Raheja

  Do you have a requirement to convert an Opportunity in Salesforce.com to an Order/Quote in Oracle E-Business Suite? Or maybe you want the creation of an Oracle RightNow Incident to trigger an on-premise Oracle E-Business Suite Service Request creation for RMA and Field Scheduling? If so, read on. In a previous blog post, I discussed integrating TO cloud applications, however the use cases above are the reverse i.e. receiving data FROM cloud applications (SaaS) TO on-premise applications/databases that sit behind a firewall. Oracle SOA Suite is assumed to be on-premise with with Oracle Service Bus as the mediation and virtualization layer. The main considerations for the patterns are are security i.e. shielding enterprise resources; and scalability i.e. minimizing firewall latency. Let me use an analogy to help visualize the patterns: the on-premise system is your home - with your most valuable possessions - and the SaaS app is your favorite on-line store which regularly ships (inbound calls) various types of parcels/items (message types/service operations). You need the items at home (on-premise) but want to safe guard against misguided elements of society (internet threats) who may masquerade as postal workers and vandalize property (denial of service?). Let's look at the patterns. Pattern: Pull from Cloud The on-premise system polls from the SaaS apps and picks up the message instead of having it delivered. This may be done using Oracle RightNow Object Query Language or SOAP APIs. This is particularly suited for certain integration approaches wherein messages are trickling in, can be centralized and batched e.g. retrieving event notifications on an hourly schedule from the Oracle Messaging Service. To compare this pattern with the home analogy, you are avoiding any deliveries to your home and instead go to the post office/UPS/Fedex store to pick up your parcel. Every time. Pros: On-premise assets not exposed to the Internet, firewall issues avoided by only initiating outbound connections Cons: Polling mechanisms may affect performance, may not satisfy near real-time requirements Pattern: Open Firewall Ports The on-premise system exposes the web services that needs to be invoked by the cloud application. This requires opening up firewall ports, routing calls to the appropriate internal services behind the firewall. Fusion Applications uses this pattern, and auto-provisions the services on the various virtual hosts to secure the topology. This works well for service integration, but may not suffice for large volume data integration. Using the home analogy, you have now decided to receive parcels instead of going to the post office every time. A door mail slot cut out allows the postman can drop small parcels, but there is still concern about cutting new holes for larger packages. Pros: optimal pattern for near real-time needs, simpler administration once the service is provisioned Cons: Needs firewall ports to be opened up for new services, may not suffice for batch integration requiring direct database access Pattern: Virtual Private Networking The on-premise network is "extended" to the cloud (or an intermediary on-demand / managed service offering) using Virtual Private Networking (VPN) so that messages are delivered to the on-premise system in a trusted channel. Using the home analogy, you entrust a set of keys with a neighbor or property manager who receives the packages, and then drops it inside your home. Pros: Individual firewall ports don't need to be opened, more suited for high scalability needs, can support large volume data integration, easier management of one connection vs a multitude of open ports Cons: VPN setup, specific hardware support, requires cloud provider to support virtual private computing Pattern: Reverse Proxy / API Gateway The on-premise system uses a reverse proxy "API gateway" software on the DMZ to receive messages. The reverse proxy can be implemented using various mechanisms e.g. Oracle API Gateway provides firewall and proxy services along with comprehensive security, auditing, throttling benefits. If a firewall already exists, then Oracle Service Bus or Oracle HTTP Server virtual hosts can provide reverse proxy implementations on the DMZ. Custom built implementations are also possible if specific functionality (such as message store-n-forward) is needed. In the home analogy, this pattern sits in between cutting mail slots and handing over keys. Instead, you install (and maintain) a mailbox in your home premises outside your door. The post office delivers the parcels in your mailbox, from where you can securely retrieve it. Pros: Very secure, very flexible Cons: Introduces a new software component, needs DMZ deployment and management Pattern: On-Premise Agent (Tunneling) A light weight "agent" software sits behind the firewall and initiates the communication with the cloud, thereby avoiding firewall issues. It then maintains a bi-directional connection either with pull or push based approaches using (or abusing, depending on your viewpoint) the HTTP protocol. Programming protocols such as Comet, WebSockets, HTTP CONNECT, HTTP SSH Tunneling etc. are possible implementation options. In the home analogy, a resident receives the parcel from the postal worker by opening the door, however you still take precautions with chain locks and package inspections. Pros: Light weight software, IT doesn't need to setup anything Cons: May bypass critical firewall checks e.g. virus scans, separate software download, proliferation of non-IT managed software Conclusion The patterns above are some of the most commonly encountered ones for cloud to on-premise integration. Selecting the right pattern for your project involves looking at your scalability needs, security restrictions, sync vs asynchronous implementation, near real-time vs batch expectations, cloud provider capabilities, budget, and more. In some cases, the basic "Pull from Cloud" may be acceptable, whereas in others, an extensive VPN topology may be well justified. For more details on the Oracle cloud integration strategy, download this white paper.

  Read the article

• Quicktips 1: Windows 7 Libraries; New website

  - by Michael B. McLaughlin

  I’m working on several large posts right now. So in the interim, I’ve decided to do shorter posts that contain something I find very helpful. This is the first. I’ve been using Windows 7 since April 2010. It’s the first OS I’ve ever worked with that I actually enjoy. I’ve used many over the years (KERNAL; PC DOS; MS-DOS 3.x+; Windows 3.0, 3.11, 95, 98, 98 SE, Me, NT 3.51, NT 4, 2000, XP, Vista, 7; various GNU/Linux distros starting with Debian 1.2 – most recently Ubuntu 10.04; ProDOS, Mac OS 9.X, Mac OS X (through 10.4); SunOS, Solaris; AIX, z/OS; OpenVMS). Some were frustrating. Some tolerable. Some were “nice except for…”. OS X actually started out as seemingly “nice” until every single release contained a breaking change to some major API and they then decided to flip-off everyone who had bought a Mac as little as two years earlier with the release of Snow Leopard without PPC support. Windows 7 is the first one that’s just “nice” without any qualifiers. There are so many little features that add up to make it nice. Today’s Quicktip is one of them. Quicktip 1: Create a Library for your Code One thing I particularly like about Windows 7 is the Libraries feature in Explorer. Specifically the fact that you can create custom ones. I used to spend a lot of time opening new Explorer windows and navigating my various Visual Studio projects folders. Custom libraries allowed me to simplify that whole process. I now simply go to my “Code” library and there it all is. Adding a new library is easy. Open an Explorer window. If you aren’t in your Libraries when it opens, navigate to Libraries. Click the “New library” button. Give it a name. Then right click on the new library you created and go to “Properties”. Click the “Include a folder…” button. Choose the folder you want and press “Include folder”. Voilà! If you wish to add more, simply click “Include a folder…” again and repeat. It’s true that this is just a small time saver. But it’s one of those things that just adds a really nice touch. ------------------------ In a separate note, just before Christmas I finally finished and published my new website: http://www.bobtacoindustries.com/ . I waited to post here about it until I found time to incorporate a few things I hadn’t had the time to do when I pushed it out for its “soft open”. Most of them are now done and so my site is now formally open. I have no plans or intentions of moving my blog ( http://blog.bobtacoindustries.com/ points here). I quite like it here, both in terms of the interface and also in terms of the concept (and realization thereof) of pooling geek bloggers to create a pool of knowledge and helpful tips, tricks, techniques, and advice. I created it simply because I felt that it was time to have a website as I venture further into my return to the land of software development. The “For Devs” section should hopefully be useful to developers, particularly the links section. It’s my curated list of sites that I regularly visit to solve problems, to help answer questions on Twitter and the AppHub forums, and to learn new things. I’ll be adding links to it periodically and will be including topic areas as I become acquainted with them enough to form a proper list. WPF will likely be the first topic area added. If there are any links you think I should add to the existing topics, let me know! I warn in advance that I’m less inclined to add blogs; there are simply too many good blogs and I do not want to have hundreds per topic area. So blogs are limited primarily, though not exclusively, to acknowledged experts in the subject area who generally blog regularly about it and who usually are part of the team that develops the product or technology in question. I’m much more amenable to including individual blogs posts in the techniques subcategory in the appropriate topic area. Ultimately, it’s a collection of things I find interesting and helpful. So please no hard feelings if I don’t add a link you think is awesome. I may well think it’s awesome too, but conclude that it doesn’t fit with my goals for the dev links area.

  Read the article

• Poor Customer Service Example

  - by MightyZot

  Lately I have been frustrated by examples of poor customer service. At least one is worth writing about because I don’t think companies realize the effects of their service policies on loyal customers. Bad Customer Service Example #1 Recently, I received an offer in the mail from my cable company, suddenLink. The offer was for an updated TiVo for $12/mo. Normally I ignore offers like this one because I already have the service they’re offering and many times advertisers are offering alternatives to what is already an excellent product offering. I tend to exhibit a high level of loyalty to the products and brands that I use. In this case, we were looking to upgrade our TiVo and this deal is attractive for several reasons: I don’t want to pay a huge amount up-front for the device, so paying a monthly amount for the device is attractive to me. My entertainment is almost all on a single invoice. I’m no longer going to be billed by suddenLink and TiVo. TiVo is still involved, so I am still loyal to the brand I love. I have resisted moving to other DVRs and services for over a decade. I called suddenLink to order the new TiVo and was rewarded with great customer service. In fact, I can’t remember ever getting poor customer service from suddenLink. They are always there to answer my technical support questions and they are very responsive to outages. Then I called TiVo. First of all, I chose the option on the phone system to change or cancel my service, which was consequently met by an inordinate hold time. (I’m calling this time inordinate because I get through very quickly if I want to purchase something.) This is a trend that I’ve noticed with companies – if you want me to be loyal to you, it should be just as easy to cancel your service as it is to purchase it. Because, I should never be cancelling because I am unhappy. And, if you ever want my business again, or more importantly a reference, then you’d better make the exit door open just as easy as the enter door. After quite some time on hold, I talked to “Victor” who was very courteous. Victor canceled my service and then told me that I could keep my current TiVo and transfer recorded programs to it from the new TiVo.  Cool I said, but what about the cost?  He said there was no extra cost.  This was also attractive to me because I paid for my TiVo and it would be good to use it for something at least.  That was four months ago. This month I noticed that TiVo was still charging me for my original service. I was a little upset, but I decided to give them the benefit of the doubt. After all, I am a loyal TiVo customer and I have resisted moving to other solutions for over a decade. I’m sure they will do whatever it takes to keep my business, through TiVo or through suddenLink. After quite some time on hold, I was able to talk to a customer service representative, “Les”. I explained that I am a loyal TiVo customer, but I purchased this deal through my cable provider. I’m still with TiVo, I just wanted a single bill and to take advantage of the pay-over-time option. “Les” told me that he was very sorry to hear that I’m leaving TiVo, to which I responded again that I wasn’t leaving TiVo, I just want one invoice, and to take advantage of the pay-over-time. So, after explaining that I requested a termination of the non-suddenLink account (TiVo can see both of course), I was put on hold again for quite some time while my refund was “approved”.  “Les” said that he could see my cancellation request back in July. Note that it is now November, so they have billed me inappropriately four times. After quite some time, he came back on the line and told me that he was able to “get me most of my money back.” He got approval to refund 90 days. Even though I requested cancellation of one of my accounts, TiVo has that cancellation request on file and they admit overbilling me, I am going to get “most” of my money back. To top this experience off, when we were ready to hang up, “Les” told me that he was sorry to see me go and that he hoped I would come back to TiVo again. Again, I explained to “Les” that I have not left TiVo. I am just paying them through suddenLink. At that point, he went into a small dissertation about how this is a special arrangement they have with suddenLink and very few others. He made me feel like I was doing something wrong. Why should I feel that way? TiVo made the deal with suddenLink, not me, and the deal seemed like a good compromise for me to be able to get what I need. Here is what TiVo Customer Service accomplished on those two calls – I no longer feel like I need to be loyal to the TiVo brand or service. If I had been treated better on these two calls, I would still be recommending TiVo to my friends. They would still be getting revenue from a loyal customer, who paid the same rate for over a decade, and this article wouldn’t be here for you to read. Interesting… In my opinion, if you want brand loyalty, be loyal to your customers!

  Read the article

• A*, Tile costs and heuristic; How to approach

  - by Kevin Toet

  I'm doing exercises in tile games and AI to improve my programming. I've written a highly unoptimised pathfinder that does the trick and a simple tile class. The first problem i ran into was that the heuristic was rounded to int's which resulted in very straight paths. Resorting a Euclidian Heuristic seemed to fixed it as opposed to use the Manhattan approach. The 2nd problem I ran into was when i tried added tile costs. I was hoping to use the value's of the flags that i set on the tiles but the value's were too small to make the pathfinder consider them a huge obstacle so i increased their value's but that breaks the flags a certain way and no paths were found anymore. So my questions, before posting the code, are: What am I doing wrong that the Manhatten heuristic isnt working? What ways can I store the tile costs? I was hoping to (ab)use the enum flags for this The path finder isnt considering the chance that no path is available, how do i check this? Any code optimisations are welcome as I'd love to improve my coding. public static List<Tile> FindPath( Tile startTile, Tile endTile, Tile[,] map ) { return FindPath( startTile, endTile, map, TileFlags.WALKABLE ); } public static List<Tile> FindPath( Tile startTile, Tile endTile, Tile[,] map, TileFlags acceptedFlags ) { List<Tile> open = new List<Tile>(); List<Tile> closed = new List<Tile>(); open.Add( startTile ); Tile tileToCheck; do { tileToCheck = open[0]; closed.Add( tileToCheck ); open.Remove( tileToCheck ); for( int i = 0; i < tileToCheck.neighbors.Count; i++ ) { Tile tile = tileToCheck.neighbors[ i ]; //has the node been processed if( !closed.Contains( tile ) && ( tile.flags & acceptedFlags ) != 0 ) { //Not in the open list? if( !open.Contains( tile ) ) { //Set G int G = 10; G += tileToCheck.G; //Set Parent tile.parentX = tileToCheck.x; tile.parentY = tileToCheck.y; tile.G = G; //tile.H = Math.Abs(endTile.x - tile.x ) + Math.Abs( endTile.y - tile.y ) * 10; //TODO omg wtf and other incredible stories tile.H = Vector2.Distance( new Vector2( tile.x, tile.y ), new Vector2(endTile.x, endTile.y) ); tile.Cost = tile.G + tile.H + (int)tile.flags; //Calculate H; Manhattan style open.Add( tile ); } //Update the cost if it is else { int G = 10;//cost of going to non-diagonal tiles G += map[ tile.parentX, tile.parentY ].G; //If this path is shorter (G cost is lower) then change //the parent cell, G cost and F cost. if ( G < tile.G ) //if G cost is less, { tile.parentX = tileToCheck.x; //change the square's parent tile.parentY = tileToCheck.y; tile.G = G;//change the G cost tile.Cost = tile.G + tile.H + (int)tile.flags; // add terrain cost } } } } //Sort costs open = open.OrderBy( o => o.Cost).ToList(); } while( tileToCheck != endTile ); closed.Reverse(); List<Tile> validRoute = new List<Tile>(); Tile currentTile = closed[ 0 ]; validRoute.Add( currentTile ); do { //Look up the parent of the current cell. currentTile = map[ currentTile.parentX, currentTile.parentY ]; currentTile.renderer.material.color = Color.green; //Add tile to list validRoute.Add( currentTile ); } while ( currentTile != startTile ); validRoute.Reverse(); return validRoute; } And my Tile class: [Flags] public enum TileFlags: int { NONE = 0, DIRT = 1, STONE = 2, WATER = 4, BUILDING = 8, //handy WALKABLE = DIRT | STONE | NONE, endofenum } public class Tile : MonoBehaviour { //Tile Properties public int x, y; public TileFlags flags = TileFlags.DIRT; public Transform cachedTransform; //A* properties public int parentX, parentY; public int G; public float Cost; public float H; public List<Tile> neighbors = new List<Tile>(); void Awake() { cachedTransform = transform; } }

  Read the article

• Silverlight Cream Monday WP7 App Review # 2

  - by Dave Campbell

  Today's Review (alphabetic order): GooNews, Grocery Shopping List, Need for Speed, SurfCube, and United Nations News. I'm a day late if these are going to be 'Monday' posts, but there are lots of apps, lots of goodness, and lots of email, so I might try to do 2 a week, we'll see. So once again I've got a small review of 5 apps that are either on my phone or have been. Disclaimers at the end. In this Issue:   GooNews is a very cool app from Shawn Wildermuth (AgiliTrain). I don't know if he uses this as a demo during his instruction, but it definitely serves a purpose... wanna pick up the top news items from Google on a never-ending basis? ... this is it. You can add your own keyword searches, and send stories to InstaPaper or share via email. I like this because it brings me the news quickly and updated, and works great. GooNews is by AgiliTrain and is Free This was a request by the author, and actually surprised me. I'm a big one for lists, but I would have just done a OneNote list to SkyDrive and to my phone. This app is a lot more than that, but will take you some setup to make it be 'yours'. For obvious reasons, there are no unit prices on things, so you have to set that up to get some idea of the cost of what you're shopping for. But if you do that, you'll get a nice total. Lots of thought went into the various categories and you can add your own. There's a bit of animation on the category selection that's nice. He seems to have covered all the bases necessary to use this, even shopping 'plans' that can be saved, and emailing of lists. As I said, I'm more of a raw list person, but if you take the time to set this up, it should work very nicely for you. Grocery Shopping List is by Grocery Shopper and is $0.99 ($1.99 after Feb 1) with a free trial. This was my 2nd commercial game I bought, and the one I've played the most. I ran the trial, thought it worked great, and bought it. I've had a lot of fun with this... there's no gas pedal.. your foot is in the carbeurator from the GO!, and unless you wanna tap the screen and brake like a little girl, just hang onto the steering wheel (the phone), and guide your way through. Hours of fun and challenges here. I like this because it's got some challenge to it, and the cars seem to be very realistic in their reactions. Need for Speed Undercover is by Electronic Arts is $4.99 and has a free trial. SurfCube Browser is another app by the folks that did the GuitarTuner I reviewed on Monday. You have to see SurfCube to believe it. You've probably seen the YouTube video, if not check SilverlightCream number 1017. The app works very solid, and just as the video demonstrates. I downloaded and tried this, and it immediately did 2 things: bought it, and pinned it to my start page. I like this because it's fun to work with, and it works great as a browser. I'm about *this* close to replacing the IE tile on my front page with SurfCube. SurfCube Browser is by Kinabalu Innovation Limited and is $1.99 and has a free trial. Coming in with another News app is United Nations News by Justin Angel. This is definitely a news aggregator for 'grown ups'... news, photos, videos, and radio broadcsts from the international community all in one very slick app. This is an amazingly well thought-out and complete app. Even better yet, Justin has the code on CodePlex. A very well-done International news aggregator. United Nations News is by Justin Angel and is Free. A few disclaimers: Feel free to write me about your app and tell me about it. While it would be very cool to receive a whole bunch of xap files to review, at this point, for technical reasons, I'm unable to side-load my device. Since I plan on only doing this one day a week (twice if I find time), and only 5, I may never get caught up, so if you send me some info, be patient. Re: games ... remember I'm old... I'm from the era of Colossal Cave and Zork. Duke-Nukem 2D and Captain Comic were awesome. I don't own an XBOX or any other game system, so take game reviews from my perspective -- who knows, it may be refreshing :) I won't pay for an app or game just to try it. If you expect me to test-drive your app, it's going to have to have a Free Trial. I'm still playing with the format, comments are welcome. I decided I should alphabetize the list today... so there's no order implied Let me know what you think of the idea of doing reviews, or the layout/whatever, and Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• ROracle support for TimesTen In-Memory Database

  - by Sam Drake

  Today's guest post comes from Jason Feldhaus, a Consulting Member of Technical Staff in the TimesTen Database organization at Oracle.  He shares with us a sample session using ROracle with the TimesTen In-Memory database.  Beginning in version 1.1-4, ROracle includes support for the Oracle Times Ten In-Memory Database, version 11.2.2. TimesTen is a relational database providing very fast and high throughput through its memory-centric architecture.  TimesTen is designed for low latency, high-volume data, and event and transaction management. A TimesTen database resides entirely in memory, so no disk I/O is required for transactions and query operations. TimesTen is used in applications requiring very fast and predictable response time, such as real-time financial services trading applications and large web applications. TimesTen can be used as the database of record or as a relational cache database to Oracle Database. ROracle provides an interface between R and the database, providing the rich functionality of the R statistical programming environment using the SQL query language. ROracle uses the OCI libraries to handle database connections, providing much better performance than standard ODBC.The latest ROracle enhancements include: Support for Oracle TimesTen In-Memory Database Support for Date-Time using R's POSIXct/POSIXlt data types RAW, BLOB and BFILE data type support Option to specify number of rows per fetch operation Option to prefetch LOB data Break support using Ctrl-C Statement caching support Times Ten 11.2.2 contains enhanced support for analytics workloads and complex queries: Analytic functions: AVG, SUM, COUNT, MAX, MIN, DENSE_RANK, RANK, ROW_NUMBER, FIRST_VALUE and LAST_VALUE Analytic clauses: OVER PARTITION BY and OVER ORDER BY Multidimensional grouping operators: Grouping clauses: GROUP BY CUBE, GROUP BY ROLLUP, GROUP BY GROUPING SETS Grouping functions: GROUP, GROUPING_ID, GROUP_ID WITH clause, which allows repeated references to a named subquery block Aggregate expressions over DISTINCT expressions General expressions that return a character string in the source or a pattern within the LIKE predicate Ability to order nulls first or last in a sort result (NULLS FIRST or NULLS LAST in the ORDER BY clause) Note: Some functionality is only available with Oracle Exalytics, refer to the TimesTen product licensing document for details. Connecting to TimesTen is easy with ROracle. Simply install and load the ROracle package and load the driver. > install.packages("ROracle") > library(ROracle) Loading required package: DBI > drv <- dbDriver("Oracle") Once the ROracle package is installed, create a database connection object and connect to a TimesTen direct driver DSN as the OS user. > conn <- dbConnect(drv, username ="", password="", dbname = "localhost/SampleDb_1122:timesten_direct") You have the option to report the server type - Oracle or TimesTen? > print (paste ("Server type =", dbGetInfo (conn)$serverType)) [1] "Server type = TimesTen IMDB" To create tables in the database using R data frame objects, use the function dbWriteTable. In the following example we write the built-in iris data frame to TimesTen. The iris data set is a small example data set containing 150 rows and 5 columns. We include it here not to highlight performance, but so users can easily run this example in their R session. > dbWriteTable (conn, "IRIS", iris, overwrite=TRUE, ora.number=FALSE) [1] TRUE Verify that the newly created IRIS table is available in the database. To list the available tables and table columns in the database, use dbListTables and dbListFields, respectively. > dbListTables (conn) [1] "IRIS" > dbListFields (conn, "IRIS") [1] "SEPAL.LENGTH" "SEPAL.WIDTH" "PETAL.LENGTH" "PETAL.WIDTH" "SPECIES" To retrieve a summary of the data from the database we need to save the results to a local object. The following call saves the results of the query as a local R object, iris.summary. The ROracle function dbGetQuery is used to execute an arbitrary SQL statement against the database. When connected to TimesTen, the SQL statement is processed completely within main memory for the fastest response time. > iris.summary <- dbGetQuery(conn, 'SELECT SPECIES, AVG ("SEPAL.LENGTH") AS AVG_SLENGTH, AVG ("SEPAL.WIDTH") AS AVG_SWIDTH, AVG ("PETAL.LENGTH") AS AVG_PLENGTH, AVG ("PETAL.WIDTH") AS AVG_PWIDTH FROM IRIS GROUP BY ROLLUP (SPECIES)') > iris.summary SPECIES AVG_SLENGTH AVG_SWIDTH AVG_PLENGTH AVG_PWIDTH 1 setosa 5.006000 3.428000 1.462 0.246000 2 versicolor 5.936000 2.770000 4.260 1.326000 3 virginica 6.588000 2.974000 5.552 2.026000 4 <NA> 5.843333 3.057333 3.758 1.199333 Finally, disconnect from the TimesTen Database. > dbCommit (conn) [1] TRUE > dbDisconnect (conn) [1] TRUE We encourage you download Oracle software for evaluation from the Oracle Technology Network. See these links for our software: Times Ten In-Memory Database,  ROracle.  As always, we welcome comments and questions on the TimesTen and  Oracle R technical forums.

  Read the article

• The Sound of Two Toilets Flushing: Constructive Criticism for Virgin Atlantic Complaints Department

  - by Geertjan

  I recently had the experience of flying from London to Johannesburg and back with Virgin Atlantic. The good news was that it was the cheapest flight available and that the take off and landing were absolutely perfect. Hence I really have no reason to complain. Instead, I'd like to offer some constructive criticism which hopefully Richard Branson will find sometime while googling his name. Or maybe someone from the Virgin Atlantic Complaints Department will find it, whatever, just want to put this information out there. Arrangement of restroom facilities. Maybe next time you design an airplane, consider not putting your toilets at a right angle right next to your rows of seats. Being able to reach, without even needing to stretch your arm, from your seat to close, yet again, a toilet door that someone, someone obviously sitting very far from the toilets, carelessly forgot to close is not an indicator of quality interior design. Have you noticed how all other airplanes have their toilets in a cubicle separated from the rows of seats? On those airplanes, people sitting in the seats near the toilets are not constantly being woken up throughout the night whenever someone enters/exits the toilet, whenever the light in the toilet is suddenly switched on, and whenever one of the toilets flushes. Bonus points for Virgin Atlantic passengers in the seats adjoining the toilets is when multiple toilets are flushed simultaneously and multiple passengers enter/exit them at the same time, a bit like an unasked for low budget musical of suddenly illuminated grumpy people in crumpled clothes. What joy that brings at 3 AM is hard to describe. Seats with extra leg room. You know how other airplanes have the seats with the extra leg room? You know what those seats tend to have? Extra leg room. It's really interesting how Virgin Atlantic's seats with extra leg room actually have no extra leg room at all. It should have been a give away, the fact that these special seats are found in the same rows as the standard seats, rather than on the cusp of real glory which is where most airlines put their extra leg room seats, with the only actual difference being that they have a slightly different color. Had you called them "seats with a different color" (i.e., almost not quite green, rather than something vaguely hinting at blue), at least I'd have known what I was getting. Picture the joy at 3 AM, rudely awakened from nightmarish slumber, partly grateful to have been released from a grayish dream of faceless zombies resembling one or two of those in a recent toilet line, by multiple adjoining toilets flushing simultaneously, while you're sitting in a seat with extra leg room that has exactly as much leg room as the seats in neighboring rows. You then have a choice of things to be sincerely annoyed about. Food from the '80's. In the '80's, airplane food came in soggy containers and even breakfast, the most important meal of the day, was a sad heap of vaguely gray colors. The culinary highlight tended to be a squashed tomato, which must have been mashed to a pulp with a brick prior to being regurgitated by a small furry animal, and there was also always a piece of immensely horrid pumpkin, as well as a slice of spongy something you'd never seen before. Sausages and mash at 6 AM on an airplane was always a heavy lump of horribleness. Thankfully, all airlines throughout the world changed from this puke inducing strategy around 1987 sometime. Not Virgin Atlantic, of course. The fatty sausages and mash are still there, bringing you flashbacks to Duran Duran, which is what you were listening to (on your walkman) the last time you saw it in an airplane. Even the golden oldie "squashed tomato attached by slime to three wet peas" is on the menu. How wonderful to have all this in a cramped seat with a long row of early morning bleariness lined up for the toilets, right at your side, bumping into your elbow, groggily, one by one, one after another, more and more, fumble-open-door-silence-flush-fumble-open-door, and on and on, while you tentatively push your fork through a soggy pile of colorless mush, fighting the urge to throw up on the stinky socks of whatever nightmarish zombie is bumping into your elbow at the time. But, then again, the plane landed without a hitch, in fact, extremely smoothly, so I'm certainly not blaming the pilots.

  Read the article

• Which of these algorithms is best for my goal?

  - by JonathonG

  I have created a program that restricts the mouse to a certain region based on a black/white bitmap. The program is 100% functional as-is, but uses an inaccurate, albeit fast, algorithm for repositioning the mouse when it strays outside the area. Currently, when the mouse moves outside the area, basically what happens is this: A line is drawn between a pre-defined static point inside the region and the mouse's new position. The point where that line intersects the edge of the allowed area is found. The mouse is moved to that point. This works, but only works perfectly for a perfect circle with the pre-defined point set in the exact center. Unfortunately, this will never be the case. The application will be used with a variety of rectangles and irregular, amorphous shapes. On such shapes, the point where the line drawn intersects the edge will usually not be the closest point on the shape to the mouse. I need to create a new algorithm that finds the closest point to the mouse's new position on the edge of the allowed area. I have several ideas about this, but I am not sure of their validity, in that they may have far too much overhead. While I am not asking for code, it might help to know that I am using Objective C / Cocoa, developing for OS X, as I feel the language being used might affect the efficiency of potential methods. My ideas are: Using a bit of trigonometry to project lines would work, but that would require some kind of intense algorithm to test every point on every line until it found the edge of the region... That seems too resource intensive since there could be something like 200 lines that would have each have to have as many as 200 pixels checked for black/white.... Using something like an A* pathing algorithm to find the shortest path to a black pixel; however, A* seems resource intensive, even though I could probably restrict it to only checking roughly in one direction. It also seems like it will take more time and effort than I have available to spend on this small portion of the much larger project I am working on, correct me if I am wrong and it would not be a significant amount of code (100 lines or around there). Mapping the border of the region before the application begins running the event tap loop. I think I could accomplish this by using my current line-based algorithm to find an edge point and then initiating an algorithm that checks all 8 pixels around that pixel, finds the next border pixel in one direction, and continues to do this until it comes back to the starting pixel. I could then store that data in an array to be used for the entire duration of the program, and have the mouse re-positioning method check the array for the closest pixel on the border to the mouse target position. That last method would presumably execute it's initial border mapping fairly quickly. (It would only have to map between 2,000 and 8,000 pixels, which means 8,000 to 64,000 checked, and I could even permanently store the data to make launching faster.) However, I am uncertain as to how much overhead it would take to scan through that array for the shortest distance for every single mouse move event... I suppose there could be a shortcut to restrict the number of elements in the array that will be checked to a variable number starting with the intersecting point on the line (from my original algorithm), and raise/lower that number to experiment with the overhead/accuracy tradeoff. Please let me know if I am over thinking this and there is an easier way that will work just fine, or which of these methods would be able to execute something like 30 times per second to keep mouse movement smooth, or if you have a better/faster method. I've posted relevant parts of my code below for reference, and included an example of what the area might look like. (I check for color value against a loaded bitmap that is black/white.) // // This part of my code runs every single time the mouse moves. // CGPoint point = CGEventGetLocation(event); float tX = point.x; float tY = point.y; if( is_in_area(tX,tY, mouse_mask)){ // target is inside O.K. area, do nothing }else{ CGPoint target; //point inside restricted region: float iX = 600; // inside x float iY = 500; // inside y // delta to midpoint between iX,iY and tX,tY float dX; float dY; float accuracy = .5; //accuracy to loop until reached do { dX = (tX-iX)/2; dY = (tY-iY)/2; if(is_in_area((tX-dX),(tY-dY),mouse_mask)){ iX += dX; iY += dY; } else { tX -= dX; tY -= dY; } } while (abs(dX)>accuracy || abs(dY)>accuracy); target = CGPointMake(roundf(tX), roundf(tY)); CGDisplayMoveCursorToPoint(CGMainDisplayID(),target); } Here is "is_in_area(int x, int y)" : bool is_in_area(NSInteger x, NSInteger y, NSBitmapImageRep *mouse_mask){ NSAutoreleasePool * pool = [[NSAutoreleasePool alloc] init]; NSUInteger pixel[4]; [mouse_mask getPixel:pixel atX:x y:y]; if(pixel[0]!= 0){ [pool release]; return false; } [pool release]; return true; }

  Read the article

• Microsoft Forcing Dev/Partners Hands on Win 8 Through Certification

  - by D'Arcy Lussier

  I remember 2.5 years ago when Microsoft dropped a bomb on the Microsoft Partner community: all Gold competencies would require .NET 4 based premiere certifications (MCPD). Problem was, this gave a window of about 6 months for partners to update their employees’ certifications. At the place I was working, I put together an aggressive plan and we were able to attain the certs needed. Microsoft is always open that the certification requirements will change as the industry changes. .NET 1.0 certifications are useless here in 2012, and rightfully so they’ve been retired for a long time now. But now we’re seeing a new tactic by Microsoft – shifting gears away from certifications that speak to what industry needs and more to the Windows 8 agenda. Consider that currently the premiere development certification is the Microsoft Certified Professional Developer, which comes in three flavours – Web, Windows, and Azure. All require WCF and Data Access exams, as well as one that deals with the associated base technologies (ASP.NET, WinForms/WPF, Azure), and one that ties all three together in a solution-based exam. For Microsoft-based organizations, these skills aren’t just valid but necessary in building Microsoft applications. But the MCPD is being replaced with our old friend Microsoft Certified Solutions Developer (MCSD). So far, Microsoft has only released two types of MCSD – Web and Windows Store Apps. Windows Store Apps?! In a push to move developers to create WinRT-based applications, desktop development is now considered a second-class citizen in the eyes of Redmond. Also interesting are the language options for the exams: HTML5 and C#. Sorry VB folks, its time to embrace curly braces whether they be JavaScript or C#. Consider too the skills being assessed for the Windows Store Apps: Get your MCSD: Windows Store Apps Using HTML5 Get your MCSD: Windows Store Apps Using C# *Image Source: http://www.microsoft.com/learning/en/us/certification/mcsd-windows-store-apps.aspx Nov 21/2012 If you look at the skills being tested in each exam, you’ll find that skills like WCF and Data Access are downplayed compared to things like integrating Charms, facilitating Search, programming for the microphone and camera – all very Windows 8 focussed items. Where this becomes maddening is that Microsoft is still pushing Windows 7 with enterprise clients. According to a ZDNet article, Microsoft wants to see Windows 7 on 70% of enterprise desktops by mid 2013. Assuming they somehow meet that (its a pretty lofty goal), there’s years of traditional desktop-based development that will still be required at some level. For those thinking they’ll just write and stick with the MCPD certification, note that most exams that go towards that certification will be retired at the end of July 2013! (Read the small print). And while details haven’t been finalized, its a safe bet that MCPD certifications eventually won’t count towards Gold-level competencies in the Microsoft Partner program. What this means for Microsoft Partners and Developers is that certification for desktop development is going to be limited to Windows Store Apps unless Microsoft re-introduces a traditional desktop (WPF) based MCSD cert. Web Application Development – It’s Not All Bad There’s big changes on the web side of certification, but I actually see these changes as being for the good! Check out the new exam requirements for MCSD – Web Applications: Get your MCSD: Web Applications certification *Image Source: http://www.microsoft.com/learning/en/us/certification/cert-mcsd-web-applications.aspx Nov 21, 2012 We now *start* with HTML5, JavaScript, and CSS3! Now I’m sure that these will be slanted towards web development in IE, and I can hear designers everywhere bemoaning the CSS/IE combination. Still, I applaud Microsoft for adopting HTML5 as the go-to web technology and requiring certified developers to prove they have skills in the basics of web dev. The fact that the second exam clearly states “MVC Web Applications” shows that Web Forms is truly legacy and deprecated. That’s not to say there aren’t those out there that are still supporting or (for whatever reason) doing new dev with Web Forms, but this move by Microsoft is telling the community they better get on the MVC bandwagon if they want to stay current. Fantastic! And of course Azure needs to be here as well, and this is where the Microsoft agenda fits in. It’s no secret that there’s been a huge push in getting developers on to Azure. I don’t see this as being a bad thing either, as cloud computing (whether Azure, private, or 3rd party) is a necessary skill for developers to have here in 2012. The cynic in me realizes that the HTML5/JavaScript/CSS push wouldn’t be as prominent though if not for the Windows 8 Store App play, where HTML5 is a first class citizen (and an available language for the MCSD Windows Store App cert). In this case, the desktop developers loss is the web developers gain. Get Ready for Changes In addition to the changes in certifications, the Microsoft Partner competencies are going through changes as well. Web and Software Development are being merged into a single competency, meaning that licenses you would have received from having both as Gold are reduced. Other competencies are either being removed or changed, as are the exam requirements. In the same way that we’re seeing faster release cycles from Microsoft, so too will we see the Microsoft Partner Program and MS Certifications evolve faster than ever before. Many of us got caught in the last wave of changes, but this time we can see the wave coming – and it looks pretty big!

  Read the article

• Nodemanager Init.d Script

  - by john.graves(at)oracle.com

  I’ve seen many of these floating around.  This is my favourite on an Ubuntu based machine. Just throw it into the /etc/init.d directory and update the following lines: export MW_HOME=/opt/app/wls10.3.4 user='weblogic' Then run: update-rc.d nodemanager default Everything else should be ok for 10.3.4. #!/bin/sh # ### BEGIN INIT INFO # Provides: nodemanager # Required-Start: # Required-Stop: # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: WebLogic Nodemanager ### END INIT INFO # nodemgr Oracle Weblogic NodeManager service # # chkconfig: 345 85 15 # description: Oracle Weblogic NodeManager service # ### BEGIN INIT INFO # Provides: nodemgr # Required-Start: $network $local_fs # Required-Stop: # Should-Start: # Should-Stop: # Default-Start: 3 4 5 # Default-Stop: 0 1 2 6 # Short-Description: Oracle Weblogic NodeManager service. # Description: Starts and stops Oracle Weblogic NodeManager. ### END INIT INFO # Source function library. . /lib/lsb/init-functions # set Weblogic environment defining CLASSPATH and LD_LIBRARY_PATH # to start/stop various components. export MW_HOME=/opt/app/wls10.3.4 # # Note: # The setWLSEnv.sh not only does a good job of setting the environment, # but also advertises the fact explicitly in the console! Silence it. # . $MW_HOME/wlserver_10.3/server/bin/setWLSEnv.sh > /dev/null # set NodeManager environment export NodeManagerHome=$WL_HOME/common/nodemanager NodeManagerLockFile=$NodeManagerHome/nodemanager.log.lck # check JAVA_HOME if [ -z ${JAVA_HOME:-} ]; then export JAVA_HOME=/opt/sun/products/java/jdk1.6.0_18 fi exec=$MW_HOME/wlserver_10.3/server/bin/startNodeManager.sh prog='nodemanager' user='weblogic' is_nodemgr_running() { local nodemgr_cnt=`ps -ef | \ grep -i 'java ' | \ grep -i ' weblogic.NodeManager ' | \ grep -v grep | \ wc -l` echo $nodemgr_cnt } get_nodemgr_pid() { nodemgr_pid=0 if [ `is_nodemgr_running` -eq 1 ]; then nodemgr_pid=`ps -ef | \ grep -i 'java ' | \ grep -i ' weblogic.NodeManager ' | \ grep -v grep | \ tr -s ' ' | \ cut -d' ' -f2` fi echo $nodemgr_pid } check_nodemgr_status () { local retval=0 local nodemgr_cnt=`is_nodemgr_running` if [ $nodemgr_cnt -eq 0 ]; then if [ -f $NodeManagerLockFile ]; then retval=2 else retval=3 fi elif [ $nodemgr_cnt -gt 1 ]; then retval=4 else retval=0 fi echo $retval } start() { ulimit -n 65535 [ -x $exec ] || exit 5 echo -n $"Starting $prog: " su $user -c "$exec &" retval=$? echo return $retval } stop() { echo -n $"Stopping $prog: " kill -s 9 `get_nodemgr_pid` &> /dev/null retval=$? echo [ $retval -eq 0 ] && rm -f $NodeManagerLockFile return $retval } restart() { stop start } reload() { restart } force_reload() { restart } rh_status() { local retval=`check_nodemgr_status` if [ $retval -eq 0 ]; then echo "$prog (pid:`get_nodemgr_pid`) is running..." elif [ $retval -eq 4 ]; then echo "Multiple instances of $prog are running..." else echo "$prog is stopped" fi return $retval } rh_status_q() { rh_status >/dev/null 2>&1 } case "$1" in start) rh_status_q && exit 0 $1 ;; stop) rh_status_q || exit 0 $1 ;; restart) $1 ;; reload) rh_status_q || exit 7 $1 ;; force-reload) force_reload ;; status) rh_status ;; condrestart|try-restart) rh_status_q || exit 0 restart ;; *) echo -n "Usage: $0 {" echo -n "start|" echo -n "stop|" echo -n "status|" echo -n "restart|" echo -n "condrestart|" echo -n "try-restart|" echo -n "reload|" echo -n "force-reload" echo "}" exit 2 esac exit $? .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; }

  Read the article

• BizTalk: Sample: Context routing and Throttling with orchestration

  - by Leonid Ganeline

  The sample demonstrates using orchestration for throttling and using context routing. Usually throttling is implemented on the host level (in BizTalk 2010 we can also using the host instance level throttling). Here is demonstrated the throttling with orchestration convoy that slows down message flow from some customers. Sample implements sort of quality service agreement layer for different kind of customers. The sample demonstrates the context routing between orchestrations. It has several advantages over the content routing. For example, we don’t have to create the property schema and promote properties on the schemas; we don’t have to change the message content to change routing. Use case:  The BizTalk application has a main processing orchestration that process all input messages. The application usually works as an OLTP application. Input messages came in random order without peaks, typical scenario for the on-line users. But sometimes the big data batch payloads come. These batches overload processing orchestrations. All processes, activated by on-line users after the payload, come to the same queue and are processed only after the payload. Result is on-line users can see significant delay in processing. It can be minutes or hours, depending of the batch size. Requirements: On-line user’s processing should work without delays. Big batches cannot disturb on-line users. There should be higher priority for the on-line users and the lower priority for the batches. Design: Decision is to divide the message flow in two branches, one for on-line users and second for batches. Branch with batches provides messages to the processing line with low priority, and the on-line user’s branch – with high priority. All messages are provided by hi-speed receive port. BTS.ReceivePortName context property is used for routing. The Router orchestration separates messages sent from on-line users and from the batch messages. But the Router does not use the BizTalk provided value of this property, the Router set up this value by itself. Router uses the content of the messages to decide if it is from on-line users or from batches. The message context property the BTS.ReceivePortName is changed respectively, its value works as a recipient address, as the “To” address for the next recipient orchestrations. Those next orchestrations are the BatchBottleneck and the MainProcess orchestrations. Messages with context equal “ToBatch” are filtered up by the BatchBottleneck orchestration. It is a unified convoy orchestration and it throttles the message flow, delaying the message delivery to the MainProcess orchestration. The BatchBottleneck orchestration changes the message context to the “ToProcess” and sends messages one after another with small delay in between. Delay can be configured in the BizTalk config file as:                 <appSettings>                                 <add key="GLD_Tests_TwoWayRouting_BatchBottleneck_DelayMillisec" value="100"/>                 </appSettings>   Of course, messages with context equal “ToProcess” are filtered up by the MainProcess orchestration.   NOTES: Filters with string values: In Orchestrations (the first Receive shape in orchestration) use string values WITH quotes; in Send Ports use string values WITHOUT quotes. Filters on the Send Ports are dynamic; we can change them in run-time. Filters on the Orchestrations are static; we can change them only in design-time. To check the existence of the promoted property inside orchestration use the Expression shape with construction like this:       if (BTS.ReceivePortName exists myMessage) { …; } It is not possible in the Message Assignment shape because using the “if” statement inside Message Assignment is prohibited. Several predefined context properties can behave in specific way. Say MessageTracking.OriginatingMessage or XMLNORM.DocumentSpecName, they are required some internal rules should be applied to the format or usage of this properties. MessageTracking.* parameters require you have to use tracking and you can get unexpected run-time errors in some cases. My recommendation is - use very limited set of the predefined context properties. To “attach” the new promoted property to the message, we have to use correlation. The correlation type should include this property. [Here is a good explanation by Saravana ] The sample code is here [sorry, temporary trubles with CodePlex].

  Read the article

• A Visual Studio Release Grows in Brooklyn

  - by andrewbrust

  Yesterday, Microsoft held its flagship launch event for Office 2010 in Manhattan.  Today, the Redmond software company is holding a local launch event for Visual Studio (VS) 2010, in Brooklyn.  How come information workers get the 212 treatment and developers are relegated to 718? Well, here’s the thing: the Brooklyn Marriott is actually a great place for an event, but you need some intimate knowledge of New York City to know that.  NBC’s Studio 8H, where the Office launch was held yesterday (and from where SNL is broadcast) is a pretty small venue, but you’d need some inside knowledge to recognize that.  Likewise, while Office 2010 is a product whose value is apparent.  Appreciating VS 2010’s value takes a bit more savvy.  Setting aside its year-based designation, this release of VS, counting the old Visual Basic releases, is the 10th version of the product.  How can a developer audience get excited about an integrated development environment when it reaches double-digit version numbers?  Well, it can be tough.  Luckily, Microsoft sent Jay Schmelzer, a Group Program Manager from the Visual Studio team in Redmond, to come tell the Brooklyn audience why they should be excited. Turns out there’s a lot of reasons.  Support fro SharePoint development is a big one.  In previous versions of VS, that support has been anemic, at best.  Shortage of SharePoint developers is a huge issue in the industry, and this should help.  There’s also built in support for Windows Azure (Microsoft’s cloud platform) and, through a download, support for the forthcoming Windows Phone 7 platform.  ASP.NET MVC, a “close-to-the-metal” Web development option that does away with the Web Forms abstraction layer, has a first-class presence in VS.  So too does jQuery, the Open Source environment that makes JavaScript development a breeze.  The jQuery support is so good that Microsoft now contributes to that Open Source project and offers IntelliSense support for it in the code editor. Speaking of the VS code editor, it now supports multi-monitor setups, zoom-in, and block selection.  If you’re not a developer, this may sound confusing and minute.  I’ll just say that for people who are developers these are little things that really contribute to productivity, and that translates into lower development costs. The really cool demo, though, was around Visual Studio 2010’s new debugging features.  This stuff is hard to showcase, but I believe it’s truly breakthrough technology: imagine being able to step backwards in time to see what might have caused a bug.  Cool?  Now imagine being able to do that, even if you weren’t the tester and weren’t present while the testing was being done.  Then imagine being able to see a video screen capture of what the tester was doing with your app when the bug occurred.  VS 2010 allows all that.  This could be the demise of the IWOMM (“it works on my machine”) syndrome. After the keynote, I asked Schmelzer if any of Microsoft’s competitors have debugging tools that come close to VS 2010’s.  His answer was an earnest “we don’t think so.”  If that’s true, that’s a big deal, and a huge advantage for developer teams who adopt it.  It will make software development much cheaper and more efficient.  Kind of like holding a launch event at the Brooklyn Marriott instead of 30 Rock in Manhattan! VS 2010 (version 10) and Office 2010 (version 14) aren’t the only new product versions Microsoft is releasing right now.  There’s also SQL Server 2008 R2 (version 10.5), Exchange 2010 (version 8, I believe), SharePoint 2010 (version 4) and, of course, Windows 7.  With so many new versions at such levels of maturity, I think it’s fair to say Microsoft has reached middle-age.  How does a company stave off a potential mid-life crisis, especially when with young Turks like Google coming along and competing so fiercely?  Hard to say.  But if focusing on core value, including value that’s hard to play into a sexy demo, is part oft the answer, then Microsoft’s doing OK.  And if some new tricks, like Windows Phone 7, can gain some traction, that might round things out nicely. Are the legacy products old tricks, or are they revised classics?  I honestly don’t know, because it’s the market’s prerogative to pass that judgement.  I can say this though: based on today’s show, I think Microsoft’s been doing its homework.

  Read the article

• How-to populate different select list content per table row

  - by frank.nimphius

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} A frequent requirement posted on the OTN forum is to render cells of a table column using instances of af:selectOneChoices with each af:selectOneChoice instance showing different list values. To implement this use case, the select list of the table column is populated dynamically from a managed bean for each row. The table's current rendered row object is accessible in the managed bean using the #{row} expression, where "row" is the value added to the table's var property. <af:table var="row">   ...   <af:column ...>     <af:selectOneChoice ...>         <f:selectItems value="#{browseBean.items}"/>     </af:selectOneChoice>   </af:column </af:table> The browseBean managed bean referenced in the code snippet above has a setItems and getItems method defined that is accessible from EL using the #{browseBean.items} expression. When the table renders, then the var property variable - the #{row} reference - is filled with the data object displayed in the current rendered table row. The managed bean getItems method returns a List<SelectItem>, which is the model format expected by the f:selectItems tag to populate the af:selectOneChoice list. public void setItems(ArrayList<SelectItem> items) {} //this method is executed for each table row public ArrayList<SelectItem> getItems() {   FacesContext fctx = FacesContext.getCurrentInstance();   ELContext elctx = fctx.getELContext();   ExpressionFactory efactory =          fctx.getApplication().getExpressionFactory();          ValueExpression ve =          efactory.createValueExpression(elctx, "#{row}", Object.class);      Row rw = (Row) ve.getValue(elctx);         //use one of the row attributes to determine which list to query and   //show in the current af:selectOneChoice list  // ...  ArrayList<SelectItem> alsi = new ArrayList<SelectItem>();  for( ... ){      SelectItem item = new SelectItem();        item.setLabel(...);        item.setValue(...);        alsi.add(item);   }   return alsi;} For better performance, the ADF Faces table stamps it data rows. Stamping means that the cell renderer component - af:selectOneChoice in this example - is instantiated once for the column and then repeatedly used to display the cell data for individual table rows. This however means that you cannot refresh a single select one choice component in a table to change its list values. Instead the whole table needs to be refreshed, rerunning the managed bean list query. Be aware that having individual list values per table row is an expensive operation that should be used only on small tables for Business Services with low latency data fetching (e.g. ADF Business Components and EJB) and with server side caching strategies for the queried data (e.g. storing queried list data in a managed bean in session scope).

  Read the article

• What Can We Learn About Software Security by Going to the Gym

  - by Nick Harrison

  There was a recent rash of car break-ins at the gym. Not an epidemic by any stretch, probably 4 or 5, but still... My gym used to allow you to hang your keys from a peg board at the front desk. This way you could come to the gym dressed to work out, lock your valuables in your car, and not have anything to worry about. Ignorance is bliss. The problem was that anyone who wanted to could go pick up your car keys, click the unlock button and find your car. Once there, they could rummage through your stuff and then walk back in and finish their workout as if nothing had happened. The people doing this were a little smatter then the average thief and would swipe some but not all of your cash leaving everything else in place. Most thieves would steal the whole car and be busted more quickly. The victims were unaware that anything had happened for several days. Fortunately, once the victims realized what had happened, the gym was still able to pull security tapes and find out who was misbehaving. All of the bad guys were busted, and everyone can now breathe a sigh of relieve. It is once again safe to go to the gym. Except there was still a fundamental problem. Putting your keys on a peg board by the front door is just asking for bad things to happen. One person got busted exploiting this security flaw. Others can still be exploiting it. In fact, others may well have been exploiting it and simply never got caught. How long would it take you to realize that $10 was missing from your wallet, if everything else was there? How would you even know when it went missing? Would you go to the front desk and even bother to ask them to review security tapes if you were only missing a small amount. Once highlighted, it is easy to see how commonly such vulnerability may have been exploited. So the gym did the very reasonable precaution of removing the peg board. To me the most shocking part of this story is the resulting uproar from gym members losing the convenient key peg. How dare they remove the trusted peg board? How can I work out now, I have to carry my keys from machine to machine? How can I enjoy my workout with this added inconvenience? This all happened a couple of weeks ago, and some people are still complaining. In light of the recent high profile hacking, there are a couple of parallels that can be drawn. Many web sites are riddled with vulnerabilities are crazy and easily exploitable as leaving your car keys by the front door while you work out. No one ever considered thanking the people who were swiping these keys for pointing out the vulnerability. Without a hesitation, they had their gym memberships revoked and are awaiting prosecution. The gym did recognize the vulnerability for what it is, and closed up that attack vector. What can we learn from this? Monitoring and logging will not prevent a crime but they will allow us to identify that a crime took place and may help track down who did it. Once we find a security weakness, we need to eliminate it. We may never identify and eliminate all security weaknesses, but we cannot allow well known vulnerabilities to persist in our system. In our case, we are not likely to meet resistance from end users. We are more likely to meet resistance from stake holders, product owners, keeper of schedules and budgets. We may meet resistance from integration partners, co workers, and third party vendors. Regardless of the source, we will see resistance, but the weakness needs to be dealt with. There is no need to glorify a cracker for bringing to light a security weakness. Regardless of their claimed motives, they are not heroes. There is also no point in wasting time defending weaknesses once they are identified. Deal with the weakness and move on. In may be embarrassing to find security weaknesses in our systems, but it is even more embarrassing to continue ignoring them. Even if it is unpopular, we need to seek out security weaknesses and eliminate them when we find them. http://www.sans.org has put together the Common Weakness Enumeration http://cwe.mitre.org/ which lists out common weaknesses. The site navigation takes a little getting used to, but there is a treasure trove here. Here is the detail page for SQL Injection. It clearly states how this can be exploited, in case anyone doubts that the weakness should be taken seriously, and more importantly how to mitigate the risk.

  Read the article

• Namespaces are obsolete

  - by Bertrand Le Roy

  To those of us who have been around for a while, namespaces have been part of the landscape. One could even say that they have been defining the large-scale features of the landscape in question. However, something happened fairly recently that I think makes this venerable structure obsolete. Before I explain this development and why it’s a superior concept to namespaces, let me recapitulate what namespaces are and why they’ve been so good to us over the years… Namespaces are used for a few different things: Scope: a namespace delimits the portion of code where a name (for a class, sub-namespace, etc.) has the specified meaning. Namespaces are usually the highest-level scoping structures in a software package. Collision prevention: name collisions are a universal problem. Some systems, such as jQuery, wave it away, but the problem remains. Namespaces provide a reasonable approach to global uniqueness (and in some implementations such as XML, enforce it). In .NET, there are ways to relocate a namespace to avoid those rare collision cases. Hierarchy: programmers like neat little boxes, and especially boxes within boxes within boxes. For some reason. Regular human beings on the other hand, tend to think linearly, which is why the Windows explorer for example has tried in a few different ways to flatten the file system hierarchy for the user. 1 is clearly useful because we need to protect our code from bleeding effects from the rest of the application (and vice versa). A language with only global constructs may be what some of us started programming on, but it’s not desirable in any way today. 2 may not be always reasonably worth the trouble (jQuery is doing fine with its global plug-in namespace), but we still need it in many cases. One should note however that globally unique names are not the only possible implementation. In fact, they are a rather extreme solution. What we really care about is collision prevention within our application. What happens outside is irrelevant. 3 is, more than anything, an aesthetical choice. A common convention has been to encode the whole pedigree of the code into the namespace. Come to think about it, we never think we need to import “Microsoft.SqlServer.Management.Smo.Agent” and that would be very hard to remember. What we want to do is bring nHibernate into our app. And this is precisely what you’ll do with modern package managers and module loaders. I want to take the specific example of RequireJS, which is commonly used with Node. Here is how you import a module with RequireJS: var http = require("http"); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } This is of course importing a HTTP stack module into the code. There is no noise here. Let’s break this down. Scope (1) is provided by the one scoping mechanism in JavaScript: the closure surrounding the module’s code. Whatever scoping mechanism is provided by the language would be fine here. Collision prevention (2) is very elegantly handled. Whereas relocating is an afterthought, and an exceptional measure with namespaces, it is here on the frontline. You always relocate, using an extremely familiar pattern: variable assignment. We are very much used to managing our local variable names and any possible collision will get solved very easily by picking a different name. Wait a minute, I hear some of you say. This is only taking care of collisions on the client-side, on the left of that assignment. What if I have two libraries with the name “http”? Well, You can better qualify the path to the module, which is what the require parameter really is. As for hierarchical organization, you don’t really want that, do you? RequireJS’ module pattern does elegantly cover the bases that namespaces used to cover, but it also promotes additional good practices. First, it promotes usage of self-contained, single responsibility units of code through the closure-based, stricter scoping mechanism. Namespaces are somewhat more porous, as using/import statements can be used bi-directionally, which leads us to my second point… Sane dependency graphs are easier to achieve and sustain with such a structure. With namespaces, it is easy to construct dependency cycles (that’s bad, mmkay?). With this pattern, the equivalent would be to build mega-components, which are an easier problem to spot than a decay into inter-dependent namespaces, for which you need specialized tools. I really like this pattern very much, and I would like to see more environments implement it. One could argue that dependency injection has some commonalities with this for example. What do you think? This is the half-baked result of some morning shower reflections, and I’d love to read your thoughts about it. What am I missing?

  Read the article

• Top Questions and Answers for Pluging into Oracle Database as a Service

  - by David Swanger

  Yesterday we hosted a comprehensive online forum that shared a comprehensive path to help your organization design, deploy, and deliver a Database as a Service cloud. If you missed the online forum, you can watch it on demand by registering here. We received numerous questions.  Below are highlights of the most informative: DBaaS requires a lengthy and careful design efforts. What is the minimum requirements of setting up a scaled-down environment and test it out? You should have an OEM 12c environment for DBaaS administration and then a target database deployment platform that has the key characteristics of what your production environment will look like. This could be a single server or it could be a small pool of hosts if your production DBaaS will be larger and you want to test a more robust / real world configuration with Zones and Pools or DR capabilities for example. How does this benefit companies having their own data center? This allows companies to transform their internal IT to a service delivery model for the database. The benefits to the company are significant cost savings, improved business agility and reduced risk. The benefits to the consumers (internal) of services if much fast provisioning, and response to change in business requirements. From a deployment perspective, is DBaaS's job solely DBA's job? The best deployment model enables the DBA (or end-user) to control the entire process. All resources required to deploy the service are pre-provisioned, and there are no external dependencies (on network, storage, sysadmins teams). The service is created either via a self-service portal or by the DBA. The purpose of self service seems to be that the end user does not rely on the DBA. I just need to give him a template. He decides how much AMM he needs. Why shall I set it one by one. That doesn't seem to be the purpose of self service. Most customers we have worked with define a standardized service catalog, with a few (2 to 5) different classes of service. For each of these classes, there is a pre-defined deployment template, and the user has the ability to select from some pre-defined service sizes. The administrator only has to create this catalog once. Each user then simply selects from the options offered in the catalog.  Looking at DBaaS service definition, it seems to be no different from a service definition provided by a well defined DBA team. Why do you attribute it to DBaaS? There are a couple of perspectives. First, some organizations might already be operating with a high level of standardization and a higher level of maturity from an ITIL or Service Management perspective. Their journey to DBaaS could be shorter and their Service Definition will evolve less but they still might need to add capabilities such as Self Service and Metering/Chargeback. Other organizations are still operating in highly siloed environments with little automation and their formal Service Definition (if they have one) will be a lot less mature today. Therefore their future state DBaaS will look a lot different from their current state, as will their Service Definition. How database as a service impact or help with "Click to Compute" or deploying "Database in cloud infrastructure" DBaaS enables Click to Compute. Oracle DBaaS can be implemented using three architecture models: Oracle Multitenant 12c, native consolidation using Oracle Database and consolidation using virtualization in infrastructure cloud. As Deploy session showed, you get higher consolidating density and efficiency using Multitenant and higher isolation using infrastructure cloud. Depending upon your business needs, DBaaS can be implemented using any of these models. How exactly is the DBaaS different from the traditional db? Storage/OS/DB all together to 'transparently' provide service to applications? Will there be across-databases access by application/user. Some key differences are: 1) The services run on a shared platform. 2) The services can be rapidly provisioned (< 15 minutes). 3) The services are dynamic and can be relocated, grown, shrunk as needed to meet business needs without disruption and rapidly. 4) The user is able to provision the services directly from a standardized service catalog.. With 24x7x365 databases its difficult to find off peak hrs to do basic admin tasks such as gathering stats, running backups, batch jobs. How does pluggable database handle this and different needs/patching downtime of apps databases might be serving? You can gather stats in Oracle Multitenant the same way you had been in regular databases. Regarding patching/upgrading, Oracle Multitenant makes patch/upgrade very efficient in that you can pre-provision a new version/patched multitenant db in a different ORACLE_HOME and then unplug a PDB from its CDB and plug it into the newer/patched CDB in seconds.  Thanks for all the great questions!  If you'd like to learn more and missed the online forum, you can watch it on demand here.

  Read the article

• Project of Projects with team Foundation Server 2010

  - by Martin Hinshelwood

  It is pretty much accepted that you should use Areas instead of having many small Team Projects when you are using Team Foundation Server 2010. I have implemented this scenario many times and this is the current iteration of layout and considerations. If like me you work with many customers you will find that you get into a grove for how to set these things up to make them as easily understandable for everyone, while giving the best functionality. The trick is in making it as intuitive as possible for both you and the developers that need to work with it. There are five main places where you need to have the Product or Project name in prominence of any other value. Area Iteration Source Code Work Item Queries Build Once you decide how you are doing this in each of these places you need to keep to it religiously. Evan if you have one source code file to keep, make sure it is in the right place. This makes your developers and others working with the format familiar with where everything should go, as well as building up mussel memory. This prevents the neat system degenerating into a nasty mess. Areas Areas are traditionally used to separate out parts of your product / project so that you can see how much effort has gone into each. Figure: The top level areas are for reporting and work item separation There are massive advantages of using this method. You can: move work from one project to another rename a project / product It is far more likely that a project or product gets renamed than a department. Tip: If you have many projects, over 100, you should consider categorising them here, but make sure that the actual project name always sits at the same level so you know which is which. Figure: Always keep things that are the same at the same level Note: You may use these categories only at the Area/Iteration level to make it easier to select on drop down lists. You may not want to use them everywhere. On the other hand, for consistency it would be better to. Iterations Iterations are usually used to some sort of time based consideration. Here I am splitting into Iterations with periodic releases. Figure: Each product needs to be able to have its own cadence The ability to have each project run at its own pace and to enable them to have their own release schedule is often of paramount importance and you don’t want to fix your 100+ projects to all be released on the same date. Source Code Having a good structure for your source even if you are not branching or having multiple products under the same structure is always a good idea. Figure: Separate out your products source You need to think about both your branches as well as the structure of your source. All your code should be under “Source” and everything you need to build your solution including Build Scripts and 3rd party tools should be under your “Main” (branch) folder. This should them be branched by “Quality”, “Release” or both to get the most out of your branching structure. The important thing is to make sure you branch (or be able to branch) everything you need to build, test and deploy your application to an environment. That environment may be development, test or even production, but I can’t stress the importance of having everything your need. Note: You usually will not be able to install custom software on your build server. Store any *.dll’s or *.exe’s that you need under the “Tools\Tool1” folder. Note: Consult the Branching Guidance for Team Foundation Server 2010 for more on branching Figure: Adding category may be a necessary evil Even if you have to have a couple of categories called “Default”, it is better than not knowing the difference between a folder, Product and Branch. Work Item Queries Queries are used to load lists of Work Items out of TFS so you can see what work you have. This means that you want to also separate queries out by Product / project to make it easier to Figure: Again you have the same first level structure Having Folders also in Work Item Tracking we do the same thing. We put all the queries under a folder named for the Product / Project and change each query to have “AreaPath=[TeamProject]\[ProductX]” in the query instead of the standard “Project=@Project”. Tip: Don’t have a folder with new queries for each iteration. Instead have a single “Current” folder that has queries that point to the current iteration. Just change the queries as you move from one iteration to another. Tip: You can ctrl+drag the “Product1” folder to create your “Product2” folder. Builds You may have many builds both for individual products but also for different quality's. This can be further complicated by having some builds that action “Gated Check-In” and others that are specifically for “Release”, “Test” or another purpose. Figure: There are no folders, yet, for the builds so you need a good naming convention Its a pity that there are no folders under builds, some way to categorise would be nice. In lue of that at the moment you can use a functional naming convention that at least allows you to find what you want. Conclusion It is really easy to both achieve and to stick to this format if you take the time to do it. Unless you have 1000+ builds or 100+ Products you are unlikely run into any issues. Even then there are things you can do to mitigate the issues and I have describes some of them above. Let me know if you can think of any other things to make this easier.

  Read the article

• Data management in unexpected places

  - by Ashok_Ora

  Normal 0 false false false EN-US X-NONE X-NONE Data management in unexpected places When you think of network switches, routers, firewall appliances, etc., it may not be obvious that at the heart of these kinds of solutions is an engine that can manage huge amounts of data at very high throughput with low latencies and high availability. Consider a network router that is processing tens (or hundreds) of thousands of network packets per second. So what really happens inside a router? Packets are streaming in at the rate of tens of thousands per second. Each packet has multiple attributes, for example, a destination, associated SLAs etc. For each packet, the router has to determine the address of the next “hop” to the destination; it has to determine how to prioritize this packet. If it’s a high priority packet, then it has to be sent on its way before lower priority packets. As a consequence of prioritizing high priority packets, lower priority data packets may need to be temporarily stored (held back), but addressed fairly. If there are security or privacy requirements associated with the data packet, those have to be enforced. You probably need to keep track of statistics related to the packets processed (someone’s sure to ask). You have to do all this (and more) while preserving high availability i.e. if one of the processors in the router goes down, you have to have a way to continue processing without interruption (the customer won’t be happy with a “choppy” VoIP conversation, right?). And all this has to be achieved without ANY intervention from a human operator – the router is most likely to be in a remote location – it must JUST CONTINUE TO WORK CORRECTLY, even when bad things happen. How is this implemented? As soon as a packet arrives, it is interpreted by the receiving software. The software decodes the packet headers in order to determine the destination, kind of packet (e.g. voice vs. data), SLAs associated with the “owner” of the packet etc. It looks up the internal database of “rules” of how to process this packet and handles the packet accordingly. The software might choose to hold on to the packet safely for some period of time, if it’s a low priority packet. Ah – this sounds very much like a database problem. For each packet, you have to minimally · Look up the most efficient next “hop” towards the destination. The “most efficient” next hop can change, depending on latency, availability etc. · Look up the SLA and determine the priority of this packet (e.g. voice calls get priority over data ftp) · Look up security information associated with this data packet. It may be necessary to retrieve the context for this network packet since a network packet is a small “slice” of a session. The context for the “header” packet needs to be stored in the router, in order to make this work. · If the priority of the packet is low, then “store” the packet temporarily in the router until it is time to forward the packet to the next hop. · Update various statistics about the packet. In most cases, you have to do all this in the context of a single transaction. For example, you want to look up the forwarding address and perform the “send” in a single transaction so that the forwarding address doesn’t change while you’re sending the packet. So, how do you do all this? Berkeley DB is a proven, reliable, high performance, highly available embeddable database, designed for exactly these kinds of usage scenarios. Berkeley DB is a robust, reliable, proven solution that is currently being used in these scenarios. First and foremost, Berkeley DB (or BDB for short) is very very fast. It can process tens or hundreds of thousands of transactions per second. It can be used as a pure in-memory database, or as a disk-persistent database. BDB provides high availability – if one board in the router fails, the system can automatically failover to another board – no manual intervention required. BDB is self-administering – there’s no need for manual intervention in order to maintain a BDB application. No need to send a technician to a remote site in the middle of nowhere on a freezing winter day to perform maintenance operations. BDB is used in over 200 million deployments worldwide for the past two decades for mission-critical applications such as the one described here. You have a choice of spending valuable resources to implement similar functionality, or, you could simply embed BDB in your application and off you go! I know what I’d do – choose BDB, so I can focus on my business problem. What will you do? /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;}

  Read the article

• Seizing the Moment with Mobility

  - by Divya Malik

  Empowering people to work where they want to work is becoming more critical now with the consumerisation of technology. Employees are bringing their own devices to the workplace and expecting to be productive wherever they are. Sales people welcome the ability to run their critical business applications where they can be most effective which is typically on the road and when they are still with the customer. Oracle has invested many years of research in understanding customer's Mobile requirements. “The keys to building the best user experience were building in a lot of flexibility in ways to support sales, and being useful,” said Arin Bhowmick, Director, CRM, for the Applications UX team. “We did that by talking to and analyzing the needs of a lot of people in different roles.” The team studied real-life sales teams. “We wanted to study salespeople in context with their work,” Bhowmick said. “We studied all user types in the CRM world because we wanted to build a user interface and user experience that would cater to sales representatives, marketing managers, sales managers, and more. Not only did we do studies in our labs, but also we did studies in the field and in mobile environments because salespeople are always on the go.” Here is a recent post from Hernan Capdevila, Vice President, Oracle Fusion Apps which was featured on the Oracle Applications Blog.  Mobile devices are forcing a paradigm shift in the workplace – they’re changing the way businesses can do business and the type of cultures they can nurture. As our customers talk about their mobile needs, we hear them saying they want instant-on access to enterprise data so workers can be more effective at their jobs anywhere, anytime. They also are interested in being more cost effective from an IT point of view. The mobile revolution – with the idea of BYOD (bring your own device) – has added an interesting dynamic because previously IT was driving the employee device strategy and ecosystem. That's been turned on its head with the consumerization of IT. Now employees are figuring out how to use their personal devices for work purposes and IT has to figure out how to adapt. Blurring the Lines between Work and Personal Life My vision of where businesses will be five years from now is that our work lives and personal lives will be more interwoven together. In turn, enterprises will have to determine how to make employees’ work lives fit more into the fabric of their personal lives. And personal devices like smartphones are going to drive significant business value because they let us accomplish things very incrementally. I can be sitting on a train or in a taxi and be productive. At the end of any meeting, I can capture ideas and tasks or follow up with people in real time. Mobile devices enable this notion of seizing the moment – capitalizing on opportunities that might otherwise have slipped away because we're not connected. For the industry shapers out there, this is game changing. The lean and agile workforce is definitely the future. This notion of the board sitting down with the executive team to lay out strategic objectives for a three- to five-year plan, bringing in HR to determine how they're going to staff the strategic activities, kicking off the execution, and then revisiting the plan in three to five years to create another three- to five-year plan is yesterday's model. Businesses that continue to approach innovating in that way are in the dinosaur age. Today it's about incremental planning and incremental execution, which requires a lot of cohesion and synthesis within the workforce. There needs to be this interweaving notion within the workforce about how ideas cascade down, how people engage, how they stay connected, and how insights are shared. How to Survive and Thrive in Today’s Marketplace The notion of Facebook isn’t new. We lived it pre-Internet days with America Online and Prodigy – Facebook is just the renaissance of these services in a more viral and pervasive way. And given the trajectory of the consumerization of IT with people bringing their personal tooling to work, the enterprise has no option but to adapt. The sooner that businesses realize this from a top-down point of view the sooner that they will be able to really drive significant innovation and adapt to the marketplace. There are a small number of companies right now (I think it's closer to 20% rather than 80%, but the number is expanding) that are able to really innovate in this incremental marketplace. So from a competitive point of view, there's no choice but to be social and stay connected. By far the majority of users on Facebook and LinkedIn are mobile users – people on iPhones, smartphones, Android phones, and tablets. It's not the couch people, right? It's the on-the-go people – those people at the coffee shops. Usually when you're sitting at your desk on a big desktop computer, typically you have better things to do than to be on Facebook. This is a topic I'm extremely passionate about because I think mobile devices are game changing. Mobility delivers significant value to businesses – it also brings dramatic simplification from a functional point of view and transforms our work life experience. Hernan Capdevila Vice President, Oracle Applications Development

  Read the article

• JPRT: A Build & Test System

  - by kto

  DRAFT A while back I did a little blogging on a system called JPRT, the hardware used and a summary on my java.net weblog. This is an update on the JPRT system. JPRT ("JDK Putback Reliablity Testing", but ignore what the letters stand for, I change what they mean every day, just to annoy people :\^) is a build and test system for the JDK, or any source base that has been configured for JPRT. As I mentioned in the above blog, JPRT is a major modification to a system called PRT that the HotSpot VM development team has been using for many years, very successfully I might add. Keeping the source base always buildable and reliable is the first step in the 12 steps of dealing with your product quality... or was the 12 steps from Alcoholics Anonymous... oh well, anyway, it's the first of many steps. ;\^) Internally when we make changes to any part of the JDK, there are certain procedures we are required to perform prior to any putback or commit of the changes. The procedures often vary from team to team, depending on many factors, such as whether native code is changed, or if the change could impact other areas of the JDK. But a common requirement is a verification that the source base with the changes (and merged with the very latest source base) will build on many of not all 8 platforms, and a full 'from scratch' build, not an incremental build, which can hide full build problems. The testing needed varies, depending on what has been changed. Anyone that was worked on a project where multiple engineers or groups are submitting changes to a shared source base knows how disruptive a 'bad commit' can be on everyone. How many times have you heard: "So And So made a bunch of changes and now I can't build!". But multiply the number of platforms by 8, and make all the platforms old and antiquated OS versions with bizarre system setup requirements and you have a pretty complicated situation (see http://download.java.net/jdk6/docs/build/README-builds.html). We don't tolerate bad commits, but our enforcement is somewhat lacking, usually it's an 'after the fact' correction. Luckily the Source Code Management system we use (another antique called TeamWare) allows for a tree of repositories and 'bad commits' are usually isolated to a small team. Punishment to date has been pretty drastic, the Queen of Hearts in 'Alice in Wonderland' said 'Off With Their Heads', well trust me, you don't want to be the engineer doing a 'bad commit' to the JDK. With JPRT, hopefully this will become a thing of the past, not that we have had many 'bad commits' to the master source base, in general the teams doing the integrations know how important their jobs are and they rarely make 'bad commits'. So for these JDK integrators, maybe what JPRT does is keep them from chewing their finger nails at night. ;\^) Over the years each of the teams have accumulated sets of machines they use for building, or they use some of the shared machines available to all of us. But the hunt for build machines is just part of the job, or has been. And although the issues with consistency of the build machines hasn't been a horrible problem, often you never know if the Solaris build machine you are using has all the right patches, or if the Linux machine has the right service pack, or if the Windows machine has it's latest updates. Hopefully the JPRT system can solve this problem. When we ship the binary JDK bits, it is SO very important that the build machines are correct, and we know how difficult it is to get them setup. Sure, if you need to debug a JDK problem that only shows up on Windows XP or Solaris 9, you'll still need to hunt down a machine, but not as a regular everyday occurance. I'm a big fan of a regular nightly build and test system, constantly verifying that a source base builds and tests out. There are many examples of automated build/tests, some that trigger on any change to the source base, some that just run every night. Some provide a protection gateway to the 'golden' source base which only gets changes that the nightly process has verified are good. The JPRT (and PRT) system is meant to guard the source base before anything is sent to it, guarding all source bases from the evil developer, well maybe 'evil' isn't the right word, I haven't met many 'evil' developers, more like 'error prone' developers. ;\^) Humm, come to think about it, I may be one from time to time. :\^{ But the point is that by spreading the build up over a set of machines, and getting the turnaround down to under an hour, it becomes realistic to completely build on all platforms and test it, on every putback. We have the technology, we can build and rebuild and rebuild, and it will be better than it was before, ha ha... Anybody remember the Six Million Dollar Man? Man, I gotta get out more often.. Anyway, now the nightly build and test can become a 'fetch the latest JPRT build bits' and start extensive testing (the testing not done by JPRT, or the platforms not tested by JPRT). Is it Open Source? No, not yet. Would you like to be? Let me know. Or is it more important that you have the ability to use such a system for JDK changes? So enough blabbering on about this JPRT system, tell me what you think. And let me know if you want to hear more about it or not. Stay tuned for the next episode, same Bloody Bat time, same Bloody Bat channel. ;\^) -kto

  Read the article

< Previous Page | 508 509 510 511 512 513 514 515 516 517 518 519  | Next Page >