Search Results

Search found 21331 results on 854 pages for 'require once'.

Page 515/854 | < Previous Page | 511 512 513 514 515 516 517 518 519 520 521 522  | Next Page >

• Class Loading Deadlocks

  - by tomas.nilsson

  Mattis follows up on his previous post with one more expose on Class Loading Deadlocks As I wrote in a previous post, the class loading mechanism in Java is very powerful. There are many advanced techniques you can use, and when used wrongly you can get into all sorts of trouble. But one of the sneakiest deadlocks you can run into when it comes to class loading doesn't require any home made class loaders or anything. All you need is classes depending on each other, and some bad luck. First of all, here are some basic facts about class loading: 1) If a thread needs to use a class that is not yet loaded, it will try to load that class 2) If another thread is already loading the class, the first thread will wait for the other thread to finish the loading 3) During the loading of a class, one thing that happens is that the <clinit method of a class is being run 4) The <clinit method initializes all static fields, and runs any static blocks in the class. Take the following class for example: class Foo { static Bar bar = new Bar(); static { System.out.println("Loading Foo"); } } The first time a thread needs to use the Foo class, the class will be initialized. The <clinit method will run, creating a new Bar object and printing "Loading Foo" But what happens if the Bar object has never been used before either? Well, then we will need to load that class as well, calling the Bar <clinit method as we go. Can you start to see the potential problem here? A hint is in fact #2 above. What if another thread is currently loading class Bar? The thread loading class Foo will have to wait for that thread to finish loading. But what happens if the <clinit method of class Bar tries to initialize a Foo object? That thread will have to wait for the first thread, and there we have the deadlock. Thread one is waiting for thread two to initialize class Bar, thread two is waiting for thread one to initialize class Foo. All that is needed for a class loading deadlock is static cross dependencies between two classes (and a multi threaded environment): class Foo { static Bar b = new Bar(); } class Bar { static Foo f = new Foo(); } If two threads cause these classes to be loaded at exactly the same time, we will have a deadlock. So, how do you avoid this? Well, one way is of course to not have these circular (static) dependencies. On the other hand, it can be very hard to detect these, and sometimes your design may depend on it. What you can do in that case is to make sure that the classes are first loaded single threadedly, for example during an initialization phase of your application. The following program shows this kind of deadlock. To help bad luck on the way, I added a one second sleep in the static block of the classes to trigger the unlucky timing. Notice that if you uncomment the "//Foo f = new Foo();" line in the main method, the class will be loaded single threadedly, and the program will terminate as it should. public class ClassLoadingDeadlock { // Start two threads. The first will instansiate a Foo object, // the second one will instansiate a Bar object. public static void main(String[] arg) { // Uncomment next line to stop the deadlock // Foo f = new Foo(); new Thread(new FooUser()).start(); new Thread(new BarUser()).start(); } } class FooUser implements Runnable { public void run() { System.out.println("FooUser causing class Foo to be loaded"); Foo f = new Foo(); System.out.println("FooUser done"); } } class BarUser implements Runnable { public void run() { System.out.println("BarUser causing class Bar to be loaded"); Bar b = new Bar(); System.out.println("BarUser done"); } } class Foo { static { // We are deadlock prone even without this sleep... // The sleep just makes us more deterministic try { Thread.sleep(1000); } catch(InterruptedException e) {} } static Bar b = new Bar(); } class Bar { static { try { Thread.sleep(1000); } catch(InterruptedException e) {} } static Foo f = new Foo(); }

  Read the article

• Why does CTFontCreateWithName != NULL on iPhone OS 3.1.3?

  - by Tony

  I am following the instructions in the Apple dev docs: http://developer.apple.com/iphone/library/documentation/DeveloperTools/Conceptual/cross_development/Using/using.html#//apple_ref/doc/uid/20002000-1114537 In this case, I'm trying to conditionally execute code, depending on whether or not CTFontCreateWithName is defined. Here is what I've reduced my test case down to: if (CTFontCreateWithName != NULL) NSLog(@"CTFontCreateWithName = %p", CTFontCreateWithName); This prints "CTFontCreateWithName = 0x0", which suggests that it's both NULL and not NULL at the same time. Even though CTFontCreateWithName != NULL evaluates to true, I get an error saying it can't resolve the symbol _CTFontCreateWithName once it gets to the line that uses it. Any ideas? Is %p not the correct way to print out the address of a function? For what it's worth, the example in their docs, UIGraphicsBeginPDFPage != NULL, evaluates to false, so it works for that one.

  Read the article

• Objective-C "miscasting" a string/int using stringWithFormat and %d

  - by user141146

  Hi, I think this is a relatively simple question, but I don't precisely know what's happening. I have a method that tries to build a string using NSString's stringWithFormat It looks like this: NSString *line1 = [NSString stringWithFormat:@"the car is %d miles away", self.ma]; In the above line "self.ma" should be an int, but in my case, I made an error and "self.ma" actually points to a NSString. So, I understand that the line should read NSString *line1 = [NSString stringWithFormat:@"the car is %@ miles away", self.ma]; but my question is what is the %d in the first example doing to my NSString? If I use the debugger, I can see that in once case, "self.ma" equals "32444", but somehow the %d converts it to 1255296. I would've guessed that the conversion of 32444 = 1255296 is some type of base-numbering conversion (hex to dec or something), but that doesn't appear to be the case. Any idea as to what %d is doing to my string? TIA

  Read the article

• Issit possible to load a UIVIewcontroller from uiview of another UIViewController

  - by chako89

  Guys, need your advise here. I have: an UIViewController A UIView B: I added subview which is a UIView to the UIViewController A an UIViewController C What I did is: in UIViewController A's viewDidLoad's method, I call this: UIView *subviewB = [[Subview alloc] initWithFrame:CGRectMake(0, 0, 1024, 768)]; [subviewB subviewBMethod]; // [self.view addSubview:rsubviewB]; SubviewBMethod code is to create an view, inside this view have a button. Once this button is clicked, it will change to UIViewController C. I tried this: [self presentModalViewController:self.UIViewControllerC animated:YES]; And I got this error message: warning: incompatible Objective-C types 'struct UIViewControllerC *', expected 'struct UIViewController *' when passing argument 1 of 'presentModalViewController:animated:' from distinct Objective-C type When I run the app, it terminates immediately when I click the button, I opened the console bug, there is no any error message. My method must be wrong, thus my question is: Issit possible to load a UIVIewcontroller from uiview of another UIViewController? If: Yes: How to do it? No: What should I do? THank you =)

  Read the article

• MVVM in Task-It

  As I'm gearing up to write a post about dynamic XAP loading with MEF, I'd like to first talk a bit about MVVM, the Model-View-ViewModel pattern, as I will be leveraging this pattern in my future posts. Download Source Code Why MVVM? Your first question may be, "why do I need this pattern? I've been using a code-behind approach for years and it works fine." Well, you really don't have to make the switch to MVVM, but let me first explain some of the benefits I see for doing so. MVVM Benefits Testability - This is the one you'll probably hear the most about when it comes to MVVM. Moving most of the code from your code-behind to a separate view model class means you can now write unit tests against the view model without any knowledge of a view (UserControl). Multiple UIs - Let's just say that you've created a killer app, it's running in the browser, and maybe you've even made it run out-of-browser. Now what if your boss comes to you and says, "I heard about this new Windows Phone 7 device that is coming out later this year. Can you start porting the app to that device?". Well, now you have to create a new UI (UserControls, etc.) because you have a lot less screen real estate to work with. So what do you do, copy all of your existing UserControls, paste them, rename them, and then start changing the code? Hmm, that doesn't sound so good. But wait, if most of the code that makes your browser-based app tick lives in view model classes, now you can create new view (UserControls) for Windows Phone 7 that reference the same view model classes as your browser-based app. Page state - In Silverlight you're at some point going to be faced with the same issue you dealt with for years in ASP.NET, maintaining page state. Let's say a user hits your Products page, does some stuff (filters record, etc.), then leaves the page and comes back later. It would be best if the Products page was in the same state as when they left it right? Well, if you've thrown away your view (UserControl or Page) and moved off to another part of the UI, when you come back to Products you're probably going to re-instantiate your view...which will put it right back in the state it was when it started. Hmm, not good. Well, with a little help from MEF you can store the state in your view model class, MEF will keep that view model instance hanging around in memory, and then you simply rebind your view to the view model class. I made that sound easy, but it's actually a bit of work to properly store and restore the state. At least it can be done though, which will make your users a lot happier! I'll talk more about this in an upcoming blog post. No event handlers? Another nice thing about MVVM is that you can bind your UserControls to the view model, which may eliminate the need for event handlers in your code-behind. So instead of having a Click handler on a Button (or RadMenuItem), for example, you can now bind your control's Command property to a DelegateCommand in your view model (I'll talk more about Commands in an upcoming post). Instead of having a SelectionChanged event handler on your RadGridView you can now bind its SelectedItem property to a property in your view model, and each time the user clicks a row, the view model property's setter will be called. Now through the magic of binding we can eliminate the need for traditional code-behind based event handlers on our user interface controls, and the best thing is that the view model knows about everything that's going on...which means we can test things without a user interface. The brains of the operation So what we're seeing here is that the view is now just a dumb layer that binds to the view model, and that the view model is in control of just about everything, like what happens when a RadGridView row is selected, or when a RadComboBoxItem is selected, or when a RadMenuItem is clicked. It is also responsible for loading data when the page is hit, as well as kicking off data inserts, updates and deletions. Once again, all of this stuff can be tested without the need for a user interface. If the test works, then it'll work regardless of whether the user is hitting the browser-based version of your app, or the Windows Phone 7 version. Nice! The database Before running the code for this app you will need to create the database. First, create a database called MVVMProject in SQL Server, then run MVVMProject.sql in the MVVMProject/Database directory of your downloaded .zip file. This should give you a Task table with 3 records in it. When you fire up the solution you will also need to update the connection string in web.config to point to your database instead of IBM12\SQLSERVER2008. The code One note about this code is that it runs against the latest Silverlight 4 RC and WCF RIA Services code. Please see my first blog post about updating to the RC bits. Beta to RC - Part 1 At the top of this post is a link to a sample project that demonstrates a sample application with a Tasks page that uses the MVVM pattern. This is a simplified version of how I have implemented the Tasks page in the Task-It application. Youll notice that Tasks.xaml has very little code to it. Just a TextBlock that displays the page title and a ContentControl. <StackPanel>     <TextBlock Text="Tasks" Style="{StaticResource PageTitleStyle}"/>     <Rectangle Style="{StaticResource StandardSpacerStyle}"/>     <ContentControl x:Name="ContentControl1"/> </StackPanel> In List.xaml we have a RadGridView. Notice that the ItemsSource is bound to a property in the view model class call Tasks, SelectedItem is bound to a property in the view model called SelectedItem, and IsBusy is bound to a property in the view model called IsLoading. <Grid>     <telerikGridView:RadGridView ItemsSource="{Binding Tasks}" SelectedItem="{Binding SelectedItem, Mode=TwoWay}"                                  IsBusy="{Binding IsLoading}" AutoGenerateColumns="False" IsReadOnly="True" RowIndicatorVisibility="Collapsed"                IsFilteringAllowed="False" ShowGroupPanel="False">         <telerikGridView:RadGridView.Columns>             <telerikGridView:GridViewDataColumn Header="Name" DataMemberBinding="{Binding Name}" Width="3*"/>             <telerikGridView:GridViewDataColumn Header="Due" DataMemberBinding="{Binding DueDate}" DataFormatString="{}{0:d}" Width="*"/>         </telerikGridView:RadGridView.Columns>     </telerikGridView:RadGridView> </Grid> In Details.xaml we have a Save button that is bound to a property called SaveCommand in our view model. We also have a simple form (Im using a couple of controls here from Silverlight.FX for the form layout, FormPanel and Label simply because they make for a clean XAML layout). Notice that the FormPanel is also bound to the SelectedItem in the view model (the same one that the RadGridView is). The two form controls, the TextBox and RadDatePicker) are bound to the SelectedItem's Name and DueDate properties. These are properties of the Task object that WCF RIA Services creates. <StackPanel>     <Button Content="Save" Command="{Binding SaveCommand}" HorizontalAlignment="Left"/>     <Rectangle Style="{StaticResource StandardSpacerStyle}"/>     <fxui:FormPanel DataContext="{Binding SelectedItem}" Style="{StaticResource FormContainerStyle}">         <fxui:Label Text="Name:"/>         <TextBox Text="{Binding Name, Mode=TwoWay}"/>         <fxui:Label Text="Due:"/>         <telerikInput:RadDatePicker SelectedDate="{Binding DueDate, Mode=TwoWay}"/>     </fxui:FormPanel> </StackPanel> In the code-behind of the Tasks control, Tasks.xaml.cs, I created an instance of the view model class (TasksViewModel) in the constructor and set it as the DataContext for the control. The Tasks page will load one of two child UserControls depending on whether you are viewing the list of tasks (List.xaml) or the form for editing a task (Details.xaml). // Set the DataContext to an instance of the view model class var viewModel = new TasksViewModel(); DataContext = viewModel;   // Child user controls (inherit DataContext from this user control) List = new List(); // RadGridView Details = new Details(); // Form When the page first loads, the List is loaded into the ContentControl. // Show the RadGridView first ContentControl1.Content = List; In the code-behind we also listen for a couple of the view models events. The ItemSelected event will be fired when the user clicks on a record in the RadGridView in the List control. The SaveCompleted event will be fired when the user clicks Save in the Details control (the form). Here the view model is in control, and is letting the view know when something needs to change. // Listeners for the view model's events viewModel.ItemSelected += OnItemSelected; viewModel.SaveCompleted += OnSaveCompleted; The event handlers toggle the view between the RadGridView (List) and the form (Details). void OnItemSelected(object sender, RoutedEventArgs e) {     // Show the form     ContentControl1.Content = Details; }   void OnSaveCompleted(object sender, RoutedEventArgs e) {     // Show the RadGridView     ContentControl1.Content = List; } In TasksViewModel, we instantiate a DataContext object and a SaveCommand in the constructor. DataContext is a WCF RIA Services object that well use to retrieve the list of Tasks and to save any changes to a task. Ill talk more about this and Commands in future post, but for now think of the SaveCommand as an event handler that is called when the Save button in the form is clicked. DataContext = new DataContext(); SaveCommand = new DelegateCommand(OnSave); When the TasksViewModel constructor is called we also make a call to LoadTasks. This sets IsLoading to true (which causes the RadGridViews busy indicator to appear) and retrieves the records via WCF RIA Services.         public LoadOperation<Task> LoadTasks()         {             // Show the loading message             IsLoading = true;             // Get the data via WCF RIA Services. When the call has returned, called OnTasksLoaded.             return DataContext.Load(DataContext.GetTasksQuery(), OnTasksLoaded, false);         } When the data is returned, OnTasksLoaded is called. This sets IsLoading to false (which hides the RadGridViews busy indicator), and fires property changed notifications to the UI to let it know that the IsLoading and Tasks properties have changed. This property changed notification basically tells the UI to rebind. void OnTasksLoaded(LoadOperation<Task> lo) {     // Hide the loading message     IsLoading = false;       // Notify the UI that Tasks and IsLoading properties have changed     this.OnPropertyChanged(p => p.Tasks);     this.OnPropertyChanged(p => p.IsLoading); } Next lets look at the view models SelectedItem property. This is the one thats bound to both the RadGridView and the form. When the user clicks a record in the RadGridView its setter gets called (set a breakpoint and see what I mean). The other code in the setter lets the UI know that the SelectedItem has changed (so the form displays the correct data), and fires the event that notifies the UI that a selection has occurred (which tells the UI to switch from List to Details). public Task SelectedItem {     get { return _selectedItem; }     set     {         _selectedItem = value;           // Let the UI know that the SelectedItem has changed (forces it to re-bind)         this.OnPropertyChanged(p => p.SelectedItem);         // Notify the UI, so it can switch to the Details (form) page         NotifyItemSelected();     } } One last thing, saving the data. When the Save button in the form is clicked it fires the SaveCommand, which calls the OnSave method in the view model (once again, set a breakpoint to see it in action). public void OnSave() {     // Save the changes via WCF RIA Services. When the save is complete, call OnSaveCompleted.     DataContext.SubmitChanges(OnSaveCompleted, null); } In OnSave, we tell WCF RIA Services to submit any changes, which there will be if you changed either the Name or the Due Date in the form. When the save is completed, it calls OnSaveCompleted. This method fires a notification back to the UI that the save is completed, which causes the RadGridView (List) to show again. public virtual void OnSaveCompleted(SubmitOperation so) {     // Clear the item that is selected in the grid (in case we want to select it again)     SelectedItem = null;     // Notify the UI, so it can switch back to the List (RadGridView) page     NotifySaveCompleted(); } Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• the best method for google indexing text content in images?

  - by dnuske

  Hi everybody, I have a webpage where I put 1 image once in a while, this is just like xkcd.com I would like to know how to let google know the text in my images. My approach is to put the text in alt html attribute, like this: <img src="http://myapokalips.com/public/cartoons/021_Robot_Tattoo.png" alt="RETARD - aw, that's a sick tattoo! - yea, bro, it means 'strength'" /> is that right? or should I put the text in some random metatag? thank you in advance.

  Read the article

• Visual Studio 2010 - Export Template menu option grayed out

  - by Jakobud

  In Visual Studio, I want to make a simple C++ project and export it out as a template, so I can use the template to start new projects to save me time. But the Export Template menu option is always grayed out. I've not once been able to click it. Anyone know why? Anyone know how to accomplish what I need (besides the obvious "make a copy of an existing project in explorer")? It seems like project templates should be a no-brainer feature for VS. This seems to be the case for Visual Studio 2005, 2010 (I probably 2008 as well I haven't checked).

  Read the article

• Should we use Visual Studio 2010 for all SQL Server Database Development?

  - by Luke

  Our company currently has seven dedicated SQL Server 2008 servers each running an average of 10 databases. All databases have many stored procedures and UDFs that commonly reference other databases both on the same server and also across linked servers. We currently use SSMS for all database related administration and development but we have recently purchased Visual Studio 2010 primarily for ongoing C# WinForms and ASP.NET development. I have used VS2010 to perform schema comparisons when rolling out changes from a development server into production and I'm finding it great for this task. We would like to consider using VS2010 for all database development going forward but as far as I understand, we would have to set up ALL databases as projects because of the dependencies on linked servers etc. My question is, do you have any experience using VS2010 for database development in a similar environment? Is it easy to use in tandem with SSMS or is it a one way street once VS2010 projects have been set up for all databases? Can you make any recommendations/impart any experience with a similar scenario? Thanks, Luke

  Read the article

• Toggle Wifi On/Off using MobileWifi private framework

  - by Ben Williams

  Hello, For a private project using the iPhone SDK (not for the app store), I would like to toggle wifi on & off. I've done something similar for Bluetooth, but can't find the required information for Wifi. I assume I need to use the MobileWifi framework. Can anyone give some directions and/or code? Most likely I expect I need a header file for the MobileWifi framework as well. Note once again, this is not for the app store, as Apple will not allow apps that use private frameworks such as this.

  Read the article

• File upload iis7

  - by maxwell

  Hi, I have a website and my users can browse the website for general information. If user wants to post any data, they need to register in the website. At the time of registration (in registration form) they can upload their photo. Once registration process is completed they can even modify the previously uploaded photo. My users are facing problem while they uploading their photo at the time of registration. I have given write permission to uploading files folder. But it is giving "Access denied" error. There should be a provision to upload files with or without logging into application. How can we achieve this?

  Read the article

• ListView FocusedItem Becomes NULL

  - by Andy and Tyler

  When the program runs, there is a series of ListView forms. We populated one of them with items (as strings) and we check whether the state of selection has changed. Once it's changed, we grab the text of the selected item using FocusedItem.Text. The first time works just fine but when another selection is made, the selected item returns as null. The only way we can temporarily get around this issue is to clear and repopulate the form. The disadvantage is that we lose the highlighted item. There got to be another way around this. Maybe we're not clear on how ListView really works? Any ideas?

  Read the article

• Database change management tools?

  - by zodeus

  We are currently in the process of solidifying a database change management process. We run MySql 5 running on RedHat 5. I have selected LiquiBase as the tool because it's open source and allows us to expand its functionality later if needed. It also seems to be one of the few free projects that are still active. Has anyone here had any experience using LiquiBase or other Db versioning tools? Company Background: We are an SaaS company providing a 7/24 hosted application. There are dozens of instances running different versions of the same database and we need a way to manage the deploy process as it's starting to get out of control. The databases have hundreds of tables and we typically do releases once every 3 months.

  Read the article

• How to get the data for intra-day candlestick charts for stocks on eg Nasdaq

  - by Chris

  Hi, For a learning exercise, i'm wanting to create candlestick (stock) graphs for stocks using zedgraph. Now on google finance, i can get daily open-high-low-close data which is perfect for making these graphs, but i'm wanting to create intra-day graphs, eg open-high-low-close data for an hour (or 5 mins, or 1 min even). Is there any way to get that kind of data without having to subscribe to any expensive service? I've heard opentick mentioned in an old SO question, but their site is defunct now. I was thinking of polling google finance once a minute to get the latest stock price, then with an hour's worth of 60 prices, i could then roughly calculate the open-high-low-close, but this is a bit of an estimation and i'm open to other suggestions. Cheers all.

  Read the article

• How should one import large amounts of data for FIT/Fitnesse tests?

  - by Lachlan

  We have a scheduling engine with large amounts of test data to test all the scenarios, so test automation is critical. We're currently hoping to use FIT/Fitnesse. However a single test has quite a large table of test data, so it doesn't fit very well into the mould of "two or three inputs, one or more outputs" that Fitnesse uses in its examples. Hopefully the other functionality of Fitnesse makes it worth using it. I hear that there is a way to initialize an application for a FIT test with an Excel spreadsheet - not the Spreadsheet to Fitness function, mind you - but I haven't been able to find it so far. Once the whole spreadsheet is loaded into the application, and the application does its thing, we plan to compare either a number of output rows, or perhaps just the last row, to see if the test passes. The application is currently pulling test data from a database for manual tests, but writing to a database, then initializing from it, is not preferred because of the performance impact. The application is written in C#.

  Read the article

• Local Declaration "x" hides instance variable xcode warning

  - by Michael Robinson

  I've been have trouble understand this problem. If I change the variable name fifthViewController the error goes away but the view controller doesn't load. Lost. Once again it's probably something simple. Thanks in advance. Here is the code: { FifthViewController *fifthViewController = [[FifthViewController alloc] initWithNibName:@"FifthView" bundle:nil]; fifthViewController.transactionID = transactionID; [self.navigationController pushViewController:fifthViewController animated:NO]; [fifthViewController release]; }

  Read the article

• Scripting with the Sun ZFS Storage 7000 Appliance

  - by Geoff Ongley

  The Sun ZFS Storage 7000 appliance has a user friendly and easy to understand graphical web based interface we call the "BUI" or "Browser User Interface".This interface is very useful for many tasks, but in some cases a script (or workflow) may be more appropriate, such as:Repetitive tasksTasks which work on (or obtain information about) a large number of shares or usersTasks which are triggered by an alert threshold (workflows)Tasks where you want a only very basic input, but a consistent output (workflows)The appliance scripting language is based on ECMAscript 3 (close to javascript). I'm not going to cover ECMAscript 3 in great depth (I'm far from an expert here), but I would like to show you some neat things you can do with the appliance, to get you started based on what I have found from my own playing around.I'm making the assumption you have some sort of programming background, and understand variables, arrays, functions to some extent - but of course if something is not clear, please let me know so I can fix it up or clarify it.Variable Declarations and ArraysVariablesECMAScript is a dynamically and weakly typed language. If you don't know what that means, google is your friend - but at a high level it means we can just declare variables with no specific type and on the fly.For example, I can declare a variable and use it straight away in the middle of my code, for example:projects=list();Which makes projects an array of values that are returned from the list(); function (which is usable in most contexts). With this kind of variable, I can do things like:projects.length (this property on array tells you how many objects are in it, good for for loops etc). Alternatively, I could say:projects=3;and now projects is just a simple number.Should we declare variables like this so loosely? In my opinion, the answer is no - I feel it is a better practice to declare variables you are going to use, before you use them - and given them an initial value. You can do so as follows:var myVariable=0;To demonstrate the ability to just randomly assign and change the type of variables, you can create a simple script at the cli as follows (bold for input):fishy10:> script("." to run)> run("cd /");("." to run)> run ("shares");("." to run)> var projects;("." to run)> projects=list();("." to run)> printf("Number of projects is: %d\n",projects.length);("." to run)> projects=152;("." to run)> printf("Value of the projects variable as an integer is now: %d\n",projects);("." to run)> .Number of projects is: 7Value of the projects variable as an integer is now: 152You can also confirm this behaviour by checking the typeof variable we are dealing with:fishy10:> script("." to run)> run("cd /");("." to run)> run ("shares");("." to run)> var projects;("." to run)> projects=list();("." to run)> printf("var projects is of type %s\n",typeof(projects));("." to run)> projects=152;("." to run)> printf("var projects is of type %s\n",typeof(projects));("." to run)> .var projects is of type objectvar projects is of type numberArraysSo you likely noticed that we have already touched on arrays, as the list(); (in the shares context) stored an array into the 'projects' variable.But what if you want to declare your own array? Easy! This is very similar to Java and other languages, we just instantiate a brand new "Array" object using the keyword new:var myArray = new Array();will create an array called "myArray".A quick example:fishy10:> script("." to run)> testArray = new Array();("." to run)> testArray[0]="This";("." to run)> testArray[1]="is";("." to run)> testArray[2]="just";("." to run)> testArray[3]="a";("." to run)> testArray[4]="test";("." to run)> for (i=0; i < testArray.length; i++)("." to run)> {("." to run)>    printf("Array element %d is %s\n",i,testArray[i]);("." to run)> }("." to run)> .Array element 0 is ThisArray element 1 is isArray element 2 is justArray element 3 is aArray element 4 is testWorking With LoopsFor LoopFor loops are very similar to those you will see in C, java and several other languages. One of the key differences here is, as you were made aware earlier, we can be a bit more sloppy with our variable declarations.The general way you would likely use a for loop is as follows:for (variable; test-case; modifier for variable){}For example, you may wish to declare a variable i as 0; and a MAX_ITERATIONS variable to determine how many times this loop should repeat:var i=0;var MAX_ITERATIONS=10;And then, use this variable to be tested against some case existing (has i reached MAX_ITERATIONS? - if not, increment i using i++);for (i=0; i < MAX_ITERATIONS; i++){ // some work to do}So lets run something like this on the appliance:fishy10:> script("." to run)> var i=0;("." to run)> var MAX_ITERATIONS=10;("." to run)> for (i=0; i < MAX_ITERATIONS; i++)("." to run)> {("." to run)>    printf("The number is %d\n",i);("." to run)> }("." to run)> .The number is 0The number is 1The number is 2The number is 3The number is 4The number is 5The number is 6The number is 7The number is 8The number is 9While LoopWhile loops again are very similar to other languages, we loop "while" a condition is met. For example:fishy10:> script("." to run)> var isTen=false;("." to run)> var counter=0;("." to run)> while(isTen==false)("." to run)> {("." to run)>    if (counter==10) ("." to run)>    { ("." to run)>            isTen=true;   ("." to run)>    } ("." to run)>    printf("Counter is %d\n",counter);("." to run)>    counter++;    ("." to run)> }("." to run)> printf("Loop has ended and Counter is %d\n",counter);("." to run)> .Counter is 0Counter is 1Counter is 2Counter is 3Counter is 4Counter is 5Counter is 6Counter is 7Counter is 8Counter is 9Counter is 10Loop has ended and Counter is 11So what do we notice here? Something has actually gone wrong - counter will technically be 11 once the loop completes... Why is this?Well, if we have a loop like this, where the 'while' condition that will end the loop may be set based on some other condition(s) existing (such as the counter has reached 10) - we must ensure that we  terminate this iteration of the loop when the condition is met - otherwise the rest of the code will be followed which may not be desirable. In other words, like in other languages, we will only ever check the loop condition once we are ready to perform the next iteration, so any other code after we set "isTen" to be true, will still be executed as we can see it was above.We can avoid this by adding a break into our loop once we know we have set the condition - this will stop the rest of the logic being processed in this iteration (and as such, counter will not be incremented). So lets try that again:fishy10:> script("." to run)> var isTen=false;("." to run)> var counter=0;("." to run)> while(isTen==false)("." to run)> {("." to run)>    if (counter==10) ("." to run)>    { ("." to run)>            isTen=true;   ("." to run)>            break;("." to run)>    } ("." to run)>    printf("Counter is %d\n",counter);("." to run)>    counter++;    ("." to run)> }("." to run)> printf("Loop has ended and Counter is %d\n", counter);("." to run)> .Counter is 0Counter is 1Counter is 2Counter is 3Counter is 4Counter is 5Counter is 6Counter is 7Counter is 8Counter is 9Loop has ended and Counter is 10Much better!Methods to Obtain and Manipulate DataGet MethodThe get method allows you to get simple properties from an object, for example a quota from a user. The syntax is fairly simple:var myVariable=get('property');An example of where you may wish to use this, is when you are getting a bunch of information about a user (such as quota information when in a shares context):var users=list();for(k=0; k < users.length; k++){     user=users[k];     run('select ' + user);     var username=get('name');     var usage=get('usage');     var quota=get('quota');...Which you can then use to your advantage - to print or manipulate infomation (you could change a user's information with a set method, based on the information returned from the get method). The set method is explained next.Set MethodThe set method can be used in a simple manner, similar to get. The syntax for set is:set('property','value'); // where value is a string, if it was a number, you don't need quotesFor example, we could set the quota on a share as follows (first observing the initial value):fishy10:shares default/test-geoff> script("." to run)> var currentQuota=get('quota');("." to run)> printf("Current Quota is: %s\n",currentQuota);("." to run)> set('quota','30G');("." to run)> run('commit');("." to run)> currentQuota=get('quota');("." to run)> printf("Current Quota is: %s\n",currentQuota);("." to run)> .Current Quota is: 0Current Quota is: 32212254720This shows us using both the get and set methods as can be used in scripts, of course when only setting an individual share, the above is overkill - it would be much easier to set it manually at the cli using 'set quota=3G' and then 'commit'.List MethodThe list method can be very powerful, especially in more complex scripts which iterate over large amounts of data and manipulate it if so desired. The general way you will use list is as follows:var myVar=list();Which will make "myVar" an array, containing all the objects in the relevant context (this could be a list of users, shares, projects, etc). You can then gather or manipulate data very easily.We could list all the shares and mountpoints in a given project for example:fishy10:shares another-project> script("." to run)> var shares=list();("." to run)> for (i=0; i < shares.length; i++)("." to run)> {("." to run)>    run('select ' + shares[i]);("." to run)>    var mountpoint=get('mountpoint');("." to run)>    printf("Share %s discovered, has mountpoint %s\n",shares[i],mountpoint);("." to run)>    run('done');("." to run)> }("." to run)> .Share and-another discovered, has mountpoint /export/another-project/and-anotherShare another-share discovered, has mountpoint /export/another-project/another-shareShare bob discovered, has mountpoint /export/another-projectShare more-shares-for-all discovered, has mountpoint /export/another-project/more-shares-for-allShare yep discovered, has mountpoint /export/another-project/yepWriting More Complex and Re-Usable CodeFunctionsThe best way to be able to write more complex code is to use functions to split up repeatable or reusable sections of your code. This also makes your more complex code easier to read and understand for other programmers.We write functions as follows:function functionName(variable1,variable2,...,variableN){}For example, we could have a function that takes a project name as input, and lists shares for that project (assuming we're already in the 'project' context - context is important!):function getShares(proj){        run('select ' + proj);        shares=list();        printf("Project: %s\n", proj);        for(j=0; j < shares.length; j++)        {                printf("Discovered share: %s\n",shares[i]);        }        run('done'); // exit selected project}Commenting your CodeLike any other language, a large part of making it readable and understandable is to comment it. You can use the same comment style as in C and Java amongst other languages.In other words, sngle line comments use://at the beginning of the comment.Multi line comments use:/*at the beginning, and:*/ at the end.For example, here we will use both:fishy10:> script("." to run)> // This is a test comment("." to run)> printf("doing some work...\n");("." to run)> /* This is a multi-line("." to run)> comment which I will span across("." to run)> three lines in total */("." to run)> printf("doing some more work...\n");("." to run)> .doing some work...doing some more work...Your comments do not have to be on their own, they can begin (particularly with single line comments this is handy) at the end of a statement, for examplevar projects=list(); // The variable projects is an array containing all projects on the system.Try and Catch StatementsYou may be used to using try and catch statements in other languages, and they can (and should) be utilised in your code to catch expected or unexpected error conditions, that you do NOT wish to stop your code from executing (if you do not catch these errors, your script will exit!):try{  // do some work}catch(err) // Catch any error that could occur{ // do something here under the error condition}For example, you may wish to only execute some code if a context can be reached. If you can't perform certain actions under certain circumstances, that may be perfectly acceptable.For example if you want to test a condition that only makes sense when looking at a SMB/NFS share, but does not make sense when you hit an iscsi or FC LUN, you don't want to stop all processing of other shares you may not have covered yet.For example we may wish to obtain quota information on all shares for all users on a share (but this makes no sense for a LUN):function getShareQuota(shar) // Get quota for each user of this share{        run('select ' + shar);        printf("  SHARE: %s\n", shar);        try        {                run('users');                printf("    %20s        %11s    %11s    %3s\n","Username","Usage(G)","Quota(G)","Quota(%)");                printf("    %20s        %11s    %11s    %4s\n","--------","--------","--------","----");                                users=list();                for(k=0; k < users.length; k++)                {                        user=users[k];                        getUserQuota(user);                }                run('done'); // exit user context        }        catch(err)        {                printf("    SKIPPING %s - This is NOT a NFS or CIFs share, not looking for users\n", shar);        }        run('done'); // done with this share}Running Scripts Remotely over SSHAs you have likely noticed, writing and running scripts for all but the simplest jobs directly on the appliance is not going to be a lot of fun.There's a couple of choices on what you can do here:Create scripts on a remote system and run them over sshCreate scripts, wrapping them in workflow code, so they are stored on the appliance and can be triggered under certain circumstances (like a threshold being reached)We'll cover the first one here, and then cover workflows later on (as these are for the most part just scripts with some wrapper information around them).Creating a SSH Public/Private SSH Key PairLog on to your handy Solaris box (You wouldn't be using any other OS, right? :P) and use ssh-keygen to create a pair of ssh keys. I'm storing this separate to my normal key:[geoff@lightning ~] ssh-keygen -t rsa -b 1024Generating public/private rsa key pair.Enter file in which to save the key (/export/home/geoff/.ssh/id_rsa): /export/home/geoff/.ssh/nas_key_rsaEnter passphrase (empty for no passphrase): Enter same passphrase again: Your identification has been saved in /export/home/geoff/.ssh/nas_key_rsa.Your public key has been saved in /export/home/geoff/.ssh/nas_key_rsa.pub.The key fingerprint is:7f:3d:53:f0:2a:5e:8b:2d:94:2a:55:77:66:5c:9b:14 geoff@lightningInstalling the Public Key on the ApplianceOn your Solaris host, observe the public key:[geoff@lightning ~] cat .ssh/nas_key_rsa.pub ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEAvYfK3RIaAYmMHBOvyhKM41NaSmcgUMC3igPN5gUKJQvSnYmjuWG6CBr1CkF5UcDji7v19jG3qAD5lAMFn+L0CxgRr8TNaAU+hA4/tpAGkjm+dKYSyJgEdMIURweyyfUFXoerweR8AWW5xlovGKEWZTAfvJX9Zqvh8oMQ5UJLUUc= geoff@lightningNow, copy and paste everything after "ssh-rsa" and before "user@hostname" - in this case, geoff@lightning. That is, this bit:AAAAB3NzaC1yc2EAAAABIwAAAIEAvYfK3RIaAYmMHBOvyhKM41NaSmcgUMC3igPN5gUKJQvSnYmjuWG6CBr1CkF5UcDji7v19jG3qAD5lAMFn+L0CxgRr8TNaAU+hA4/tpAGkjm+dKYSyJgEdMIURweyyfUFXoerweR8AWW5xlovGKEWZTAfvJX9Zqvh8oMQ5UJLUUc=Logon to your appliance and get into the preferences -> keys area for this user (root):[geoff@lightning ~] ssh [email protected]: Last login: Mon Dec  6 17:13:28 2010 from 192.168.0.2fishy10:> configuration usersfishy10:configuration users> select rootfishy10:configuration users root> preferences fishy10:configuration users root preferences> keysOR do it all in one hit:fishy10:> configuration users select root preferences keysNow, we create a new public key that will be accepted for this user and set the type to RSA:fishy10:configuration users root preferences keys> createfishy10:configuration users root preferences key (uncommitted)> set type=RSASet the key itself using the string copied previously (between ssh-rsa and user@host), and set the key ensuring you put double quotes around it (eg. set key="<key>"):fishy10:configuration users root preferences key (uncommitted)> set key="AAAAB3NzaC1yc2EAAAABIwAAAIEAvYfK3RIaAYmMHBOvyhKM41NaSmcgUMC3igPN5gUKJQvSnYmjuWG6CBr1CkF5UcDji7v19jG3qAD5lAMFn+L0CxgRr8TNaAU+hA4/tpAGkjm+dKYSyJgEdMIURweyyfUFXoerweR8AWW5xlovGKEWZTAfvJX9Zqvh8oMQ5UJLUUc="Now set the comment for this key (do not use spaces):fishy10:configuration users root preferences key (uncommitted)> set comment="LightningRSAKey" Commit the new key:fishy10:configuration users root preferences key (uncommitted)> commitVerify the key is there:fishy10:configuration users root preferences keys> lsKeys:NAME     MODIFIED              TYPE   COMMENT                                  key-000  2010-10-25 20:56:42   RSA    cycloneRSAKey                           key-001  2010-12-6 17:44:53    RSA    LightningRSAKey                         As you can see, we now have my new key, and a previous key I have created on this appliance.Running your Script over SSH from a Remote SystemHere I have created a basic test script, and saved it as test.ecma3:[geoff@lightning ~] cat test.ecma3 script// This is a test script, By Geoff Ongley 2010.printf("Testing script remotely over ssh\n");.Now, we can run this script remotely with our keyless login:[geoff@lightning ~] ssh -i .ssh/nas_key_rsa root@fishy10 < test.ecma3Pseudo-terminal will not be allocated because stdin is not a terminal.Testing script remotely over sshPutting it Together - An Example Completed Quota Gathering ScriptSo now we have a lot of the basics to creating a script, let us do something useful, like, find out how much every user is using, on every share on the system (you will recognise some of the code from my previous examples): script/************************************** Quick and Dirty Quota Check script ** Written By Geoff Ongley            ** 25 October 2010                    **************************************/function getUserQuota(usr){        run('select ' + usr);        var username=get('name');        var usage=get('usage');        var quota=get('quota');        var usage_g=usage / 1073741824; // convert bytes to gigabytes        var quota_g=quota / 1073741824; // as above        var quota_percent=0        if (quota > 0)        {                quota_percent=(usage / quota)*(100/1);        }        printf("    %20s        %8.2f           %8.2f           %d%%\n",username,usage_g,quota_g,quota_percent);        run('done'); // done with this selected user}function getShareQuota(shar){        //printf("DEBUG: selecting share %s\n", shar);        run('select ' + shar);        printf("  SHARE: %s\n", shar);        try        {                run('users');                printf("    %20s        %11s    %11s    %3s\n","Username","Usage(G)","Quota(G)","Quota(%)");                printf("    %20s        %11s    %11s    %4s\n","--------","--------","--------","--------");                                users=list();                for(k=0; k < users.length; k++)                {                        user=users[k];                        getUserQuota(user);                }                run('done'); // exit user context        }        catch(err)        {                printf("    SKIPPING %s - This is NOT a NFS or CIFs share, not looking for users\n", shar);        }        run('done'); // done with this share}function getShares(proj){        //printf("DEBUG: selecting project %s\n",proj);        run('select ' + proj);        shares=list();        printf("Project: %s\n", proj);        for(j=0; j < shares.length; j++)        {                share=shares[j];                getShareQuota(share);        }        run('done'); // exit selected project}function getProjects(){        run('cd /');        run('shares');        projects=list();                for (i=0; i < projects.length; i++)        {                var project=projects[i];                getShares(project);        }        run('done'); // exit context for all projects}getProjects();.Which can be run as follows, and will print information like this:[geoff@lightning ~/FISHWORKS_SCRIPTS] ssh -i ~/.ssh/nas_key_rsa root@fishy10 < get_quota_utilisation.ecma3Pseudo-terminal will not be allocated because stdin is not a terminal.Project: another-project  SHARE: and-another                Username           Usage(G)       Quota(G)    Quota(%)                --------           --------       --------    --------                  nobody            0.00            0.00        0%                 geoffro            0.05            0.00        0%                   Billy            0.10            0.00        0%                    root            0.00            0.00        0%            testing-user            0.05            0.00        0%  SHARE: another-share                Username           Usage(G)       Quota(G)    Quota(%)                --------           --------       --------    --------                    root            0.00            0.00        0%                  nobody            0.00            0.00        0%                 geoffro            0.05            0.49        9%            testing-user            0.05            0.02        249%                   Billy            0.10            0.29        33%  SHARE: bob                Username           Usage(G)       Quota(G)    Quota(%)                --------           --------       --------    --------                  nobody            0.00            0.00        0%                    root            0.00            0.00        0%  SHARE: more-shares-for-all                Username           Usage(G)       Quota(G)    Quota(%)                --------           --------       --------    --------                   Billy            0.10            0.00        0%            testing-user            0.05            0.00        0%                  nobody            0.00            0.00        0%                    root            0.00            0.00        0%                 geoffro            0.05            0.00        0%  SHARE: yep                Username           Usage(G)       Quota(G)    Quota(%)                --------           --------       --------    --------                    root            0.00            0.00        0%                  nobody            0.00            0.00        0%                   Billy            0.10            0.01        999%            testing-user            0.05            0.49        9%                 geoffro            0.05            0.00        0%Project: default  SHARE: Test-LUN    SKIPPING Test-LUN - This is NOT a NFS or CIFs share, not looking for users  SHARE: test-geoff                Username           Usage(G)       Quota(G)    Quota(%)                --------           --------       --------    --------                 geoffro            0.05            0.00        0%                    root            3.18           10.00        31%                    uucp            0.00            0.00        0%                  nobody            0.59            0.49        119%^CKilled by signal 2.Creating a WorkflowWorkflows are scripts that we store on the appliance, and can have the script execute either on request (even from the BUI), or on an event such as a threshold being met.Workflow BasicsA workflow allows you to create a simple process that can be executed either via the BUI interface interactively, or by an alert being raised (for some threshold being reached, for example).The basics parameters you will have to set for your "workflow object" (notice you're creating a variable, that embodies ECMAScript) are as follows (parameters is optional):name: A name for this workflowdescription: A Description for the workflowparameters: A set of input parameters (useful when you need user input to execute the workflow)execute: The code, the script itself to execute, which will be function (parameters)With parameters, you can specify things like this (slightly modified sample taken from the System Administration Guide):          ...parameters:        variableParam1:         {                             label: 'Name of Share',                             type: 'String'                  },                  variableParam2                  {                             label: 'Share Size',                             type: 'size'                  },execute: ....};  Note the commas separating the sections of name, parameters, execute, and so on. This is important!Also - there is plenty of properties you can set on the parameters for your workflow, these are described in the Sun ZFS Storage System Administration Guide.Creating a Basic Workflow from a Basic ScriptTo make a basic script into a basic workflow, you need to wrap the following around your script to create a 'workflow' object:var workflow = {name: 'Get User Quotas',description: 'Displays Quota Utilisation for each user on each share',execute: function() {// (basic script goes here, minus the "script" at the beginning, and "." at the end)}};However, it appears (at least in my experience to date) that the workflow object may only be happy with one function in the execute parameter - either that or I'm doing something wrong. As far as I can tell, after execute: you should only have a basic one function context like so:execute: function(){}To deal with this, and to give an example similar to our script earlier, I have created another simple quota check, to show the same basic functionality, but in a workflow format:var workflow = {name: 'Get User Quotas',description: 'Displays Quota Utilisation for each user on each share',execute: function () {        run('cd /');        run('shares');        projects=list();                for (i=0; i < projects.length; i++)        {                run('select ' + projects[i]);                shares=list('filesystem');                printf("Project: %s\n", projects[i]);                for(j=0; j < shares.length; j++)                {                        run('select ' +shares[j]);                        try                        {                                run('users');                                printf("  SHARE: %s\n", shares[j]);                                printf("    %20s        %11s    %11s    %3s\n","Username","Usage(G)","Quota(G)","Quota(%)");                                printf("    %20s        %11s    %11s    %4s\n","--------","--------","--------","-------");                                users=list();                                for(k=0; k < users.length; k++)                                {                                        run('select ' + users[k]);                                        username=get('name');                                        usage=get('usage');                                        quota=get('quota');                                        usage_g=usage / 1073741824; // convert bytes to gigabytes                                        quota_g=quota / 1073741824; // as above                                        quota_percent=0                                        if (quota > 0)                                        {                                                quota_percent=(usage / quota)*(100/1);                                        }                                        printf("    %20s        %8.2f   %8.2f   %d%%\n",username,usage_g,quota_g,quota_percent);                                        run('done');                                }                                run('done'); // exit user context                        }                        catch(err)                        {                        //      printf("    %s is a LUN, Not looking for users\n", shares[j]);                        }                        run('done'); // exit selected share context                }                run('done'); // exit project context        }        }};SummaryThe Sun ZFS Storage 7000 Appliance offers lots of different and interesting features to Sun/Oracle customers, including the world renowned Analytics. Hopefully the above will help you to think of new creative things you could be doing by taking advantage of one of the other neat features, the internal scripting engine!Some references are below to help you continue learning more, I'll update this post as I do the same! Enjoy...More information on ECMAScript 3A complete reference to ECMAScript 3 which will help you learn more of the details you may be interested in, can be found here:http://www.ecma-international.org/publications/files/ECMA-ST-ARCH/ECMA-262,%203rd%20edition,%20December%201999.pdfMore Information on Administering the Sun ZFS Storage 7000The Sun ZFS Storage 7000 System Administration guide can be a useful reference point, and can be found here:http://wikis.sun.com/download/attachments/186238602/2010_Q3_2_ADMIN.pdf

  Read the article

• Adding UCM as a search source in Windows Explorer

  - by kyle.hatlestad

  A customer recently pointed out to me that Windows 7 supports federated search within Windows Explorer. This means you can perform searches to external sources such as Google, Flickr, YouTube, etc right from within Explorer. While we do have the Desktop Integration Suite which offers searching within Explorer, I thought it would be interesting to look into this method which would not require any client software to implement. Basically, federated searching hooks up in Windows Explorer through the OpenSearch protocol. A Search Connector Descriptor file is run and it installs the search provider. The file is a .osdx file which is an OpenSearch Description document. It describes the search provider you are hooking up to along with the URL for the query. If those results can come back as an RSS or ATOM feed, then you're all set. So the first step is to install the RSS Feeds component from the UCM Samples page on OTN. If you're on 11g, I've found the RSS Feeds works just fine on that version too. Next, you want to perform a Quick Search with a particular search term and then copy the RSS link address for that search result. Here is what an example URL might looks like: http://server:16200/cs/idcplg?IdcService=GET_SCS_FEED&feedName=search_results&QueryText=%28+%3cqsch%3eoracle%3c%2fqsch %3e+%29&SortField=dInDate&SortOrder=Desc&ResultCount=20&SearchQueryFormat= Universal&SearchProviders=server& Now you want to create a new text file and start out with this information: <?xml version="1.0" encoding="UTF-8"?><OpenSearchDescription xmlns:ms-ose="http://schemas.microsoft.com/opensearchext/2009/"> <ShortName></ShortName> <Description></Description> <Url type="application/rss+xml" template=""/> <Url type="text/html" template=""/> </OpenSearchDescription> Enter a ShortName and Description. The ShortName will be the value used when displaying the search provider in Explorer. In the template attribute for the first Url element, enter the URL copied previously. You will then need to convert the ampersand symbols to '&' to make them XML compliant. Finally, you'll want to switch out the search term with '{searchTerms}'. For the second Url element, you can do the same thing except you want to copy the UCM search results URL from the page of results. That URL will look something like: http://server:16200/cs/idcplg?IdcService=GET_SEARCH_RESULTS&SortField=dInDate&SortOrder=Desc&ResultCount=20&QueryText=%3Cqsch%3Eoracle%3C%2Fqsch%3E&listTemplateId= &ftx=1&SearchQueryFormat=Universal&TargetedQuickSearchSelection= &MiniSearchText=oracle Again, convert the ampersand symbols and replace the search term with '{searchTerms}'. When complete, save the file with the .osdx extension. The completed file should look like: <?xml version="1.0" encoding="UTF-8"?> <OpenSearchDescription xmlns="http://a9.com/-/spec/opensearch/1.1/" xmlns:ms-ose="http://schemas.microsoft.com/opensearchext/2009/"> <ShortName>Universal Content Management</ShortName> <Description>OpenSearch for UCM via Windows 7 Search Federation.</Description> <Url type="application/rss+xml" template="http://server:16200/cs/idcplg?IdcService=GET_SCS_FEED&amp;feedName=search_results&amp;QueryText=%28+%3Cqsch%3E{searchTerms}%3C%2fqsch%3E+%29&amp;SortField=dInDate&amp;SortOrder=Desc&amp;ResultCount=200&amp;SearchQueryFormat=Universal"/> <Url type="text/html" template="http://server:16200/cs/idcplg?IdcService=GET_SEARCH_RESULTS&amp;SortField=dInDate&amp;SortOrder=Desc&amp;ResultCount=20&amp;QueryText=%3Cqsch%3E{searchTerms}%3C%2Fqsch%3E&amp;listTemplateId=&amp;ftx=1&amp;SearchQueryFormat=Universal&amp;TargetedQuickSearchSelection=&amp;MiniSearchText={searchTerms}"/> </OpenSearchDescription> After you save the file, simply double-click it to create the provider. It will ask if you want to add the search connector to Windows. Click Add and it will add it to the Searches folder in your user folder as well as your Favorites. Now just click on the search icon and in the upper right search box, enter your term. As you are typing, it begins executing searches and the results will come back in Explorer. Now when you double-click on an item, it will try and download the web viewable for viewing. You also have the ability to save the search, just as you would in UCM. And there is a link to Search On Website which will launch your browser and go directly to the search results page there. And with some tweaks to the RSS component, you can make the results a bit more interesting. It supports the Media RSS standard, so you can pass along the thumbnail of the documents in the results. To enable this, edit the rss_resources.htm file in the RSS Feeds component. In the std_rss_feed_begin resource include, add the namespace 'xmlns:media="http://search.yahoo.com/mrss/' to the rss definition: <rss version="2.0" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:sy="http://purl.org/rss/1.0/modules/syndication/" xmlns:media="http://search.yahoo.com/mrss/"> Next, in the rss_channel_item_with_thumb include, below the closing image element, add this element: </images> <media:thumbnail url="<$if strIndexOf(thumbnailUrl, "@t") > 0 or strIndexOf(thumbnailUrl, "@g") > 0 or strIndexOf(thumbnailUrl, "@p") > 0$><$rssHttpHost$><$thumbnailUrl$><$elseif dGif$><$HttpWebRoot$>images/docgifs/<$dGif$><$endif$>" /> <description> This and lots of other tweaks can be done to the RSS component to help extend it for optimum use in Explorer. Hopefully this can get you started. *Note: This post also applies to Universal Records Management (URM).

  Read the article

• get img src from an img loaded dynamically using jQuery

  - by Lee

  Hey Guys (and Ladies) I am looking at getting the image name from an image with a src loaded dynamically. Basically what I am doing is using the Google chat badge on a site to live chatting. And else where on the page, I have an image saying Live Chat:Online or Live Chat:Offline. And I want this to change depending on whether I am available to chat or not. Does this make sense? Anyway, the easiest way I figure to do this would be check the img url. If the img is offline.gif then obviously I am offline. An example of a dynamically loaded img would be something like <img src="http://www.google.com/talk/service/badge/Show?encrypted_acount_id_here" /> Once this image has loaded, it loads one of the following images "http://www.google.com/talk/service/resources/offlinef.gif" "http://www.google.com/talk/service/resources/idlef.gif" "http://www.google.com/talk/service/resources/onlinef.gif" Hopefully this make sense now. Thanks heaps

  Read the article

• OpenStreetMap and Hadoop

  - by portoalet

  Hi, I need some ideas for a weekend project about Hadoop and OpenStreetMap. I have access to AWS EC2 instance with OpenStreetMap snapshot in my EBS volume. The OpenStreetMap data is in a PostgreSQL database. What kind of MapReduce function can be run on the OpenStreetMap data, assuming I can export them into xml format, and then place into HDFS ? In other words, I am having a brain cramp at the moment, and cannot think what kind of MapReduce operation that can extract valuable insight from the OpenStreetMap xml? (i.e. extract all the places designated as park or golf course. But this needs to be done once only, not continuously) Many Thanks

  Read the article

• Changing UIImageView animation speed

  - by Nikolas Stephan

  I am using the UIImageView to animate a bunch of images. I know that I can change the speed by altering animationDuration, but that doesn't seem to take effect until the animation is restarted. My problem is that beside not really wanting to have to restart the animation as this limits me to only being able to change the speed once per cycle, there also doesn't seem to be a way to find out what frame is currently being shown and I would therefore have to rely on a timer to "guess" which one it is. So my question is whether there is a way to change the speed without restarting the animation and if not is there some way I could avoid the aforementioned problem? I'm not too keen to write my own animation class, but may end up having to if there isn't a nicer solution.

  Read the article

• DIV overlap on top of submit order INPUT button not working right in IE7

  - by Lauren

  I created a test account at www.avaline.com: username: [email protected] pass:test02 I'll keep the account around so you can see what's going on with this submit button without going through the registration process (and needing to fill in a fake address, etc). If logging in doesn't work, you can create your own test account though. Make sure at least one item is in your shopping cart, hit "proceed to checkout", and check off "PayPal" as your payment method (this way the payment won't go through for testing purposes). Once you're on the "review and submit" page, in IE7 (at least), hover over the "pay with Paypal" button, and you'll see that the cursor is a hand when you hover over the text or the button border, but it's a regular arrow when you hover over the button part. If you try clicking on the arrow-cursor area, you'll get the error that you should see...but if you click on the hand-cursor area, you get redirected to the paypal page. In FF, the #hidSubm DIV covers the "Pay with Paypal" button. Why isn't it working in IE7?

  Read the article

• Can I split an IEnumerable into two by a boolean criteria without two queries?

  - by SFun28

  Folks, Is it possible to split an IEnumerable into two IEnumerables using LINQ and only a single query/linq statement? In this way, I would avoid iterating through the IEnumerable twice. For example, is it possible to combine the last two statements below so allValues is only traversed once? IEnumerable<MyObj> allValues = ... List<MyObj> trues = allValues.Where( val => val.SomeProp ).ToList(); List<MyObj> falses = allValues.Where( val => !val.SomeProp ).ToList();

  Read the article

• Check for Block Ads/Scripts (Browser Addons, Compatibility)

  - by acidzombie24

  I'm conflicted. you guys decide if this should migrate to SU or not. I would like to test my site against popular browser ad ons. ATM i have tested against noscript and adblock plus for firefox. What other popular ad ons should i check compatibility with? By compatibility i mean to work as intent on browsers i support (opera, firefox, chrome, IE 7/8) which include ads. NoScript broke my site and for adblock plus i ask once per week to consider allowing ads. When i see IE6 i notify the user the site is known to be unusable with that browser (The site is script heavy by nature and i wouldnt want to accidentally serve ads to infect users of IE6 with a virus).

  Read the article

• System.Threading.Tasks - Limit the number of concurrent Tasks

  - by James

  I have just started to look at the new "System.Threading.Tasks" goodness in .Net 4.0, and would like to know if there is any build in support for limiting the number of concurrent tasks that run at once, or if this should be manually handled. E.G: If I need to call a calculation method 100 times, is there a way to set up 100 Tasks, but have only 5 execute simultaneously? The answer may just be to create 5 tasks, call Task.WaitAny, and create a new Task as each previous one finishes. I just want to make sure I am not missing a trick if there is a better way to do this. Thanks for any help.

  Read the article

• atomic writes to ehcache

  - by Jacques René Mesrine

  Context I am storing a java.util.List inside ehcache. Key(String) --> List<UserDetail> The ordered List contains a Top 10 ranking of my most active users. Problem Concurrent 3rd party clients might be requesting for this list. I have a requirement to be as current as possible with regards to the ranking. Thus if the ranking is changed due the activities of users, the ordered List in the cache must not be left stale for very long. Once I've recalculated a new List, I want to replace the one in cache immediately. Consider a busy scenario whereby multiple concurrent clients are requesting for the ranking; how can I replace the cache item in an fashion such that: Clients can continue to pull a possibly stale snapshot. They should never get a null value. There will only be 1 server thread that writes to the cache.

  Read the article

< Previous Page | 511 512 513 514 515 516 517 518 519 520 521 522  | Next Page >