virtual host - Page 516

Where can I configure wireless to be passed on to the Virtualbox guest?

- by huahsin68

I have WinXP install in virtualbox which host in Linux. I have a TP-Link (TP-WN321G) USB wifi adapter and have the driver installed inside WinXP. When I plug-in the wifi adapter, there is an option show "Ralink 802.11g WLAN [0101]" in the virtualbox's USB icon, tick on that option, the Device Manager able to detect the hardware which shows TP-Link, but when look into the properties, it says there is no driver was install. I did try to install Ralink driver but still no luck. Just curious why my wifi adapter is TP-Link, but the option show Ralink? May I know how can I emulate the wireless network inside WindowsXP?

Read the article

Setting a wireless access point on Ubuntu server 11.10

- by Solignis

I am trying to setup a wifi access point with my Ubuntu server. I have managed to get my phone to connect the wireless and now it get a DHCP lease. Though it still cannot ping out or get pinged by anything on my network. I am prety sure my problem is iptables, but I not sure what would be wrong. Here is what my rules look like. (The ones pertaining to the bridge interface) # Allow traffic to / from wireless bridge interface iptables -A INPUT -i br0 -j ACCEPT iptables -A OUTPUT -o br0 -j ACCEPT I am guessing my rules are a little lean, the bridge exists on the same subnet as everything else on my network, I am using a 10.0.0.0/24 subnet. EDIT Oh yeah I should mention also, when I do a ping test, I get Destination Host Unreachable as the error.

Read the article

TCP/IP performance tuning under KVM/Qemu

- by vpetersson

With more and more companies switching to public cloud services, I'm curious what you guys' thoughts are on TCP/IP tuning in the cloud. Is it worth bothering with? Given that you don't have access to the host-server, you're somewhat limited I presume Let's say for the sake of the argument that you're running three MongoDB-servers in a replica-set on FreeBSD or Linux that all sync over an internal network. I'd also be curious if anyone made any actual performance benchmarks to back up their arguments. I benchmarked the various network drivers available for KVM/Qemu here, but I'm curious what the gurus here suggest to tune further. I started playing around a bit with the tuning-recommendations as suggested over here, but interestingly enough I saw a decrease in performance, rather than an increase, but perhaps I didn't fully understand the tweaks. Update: I did a few more benchmarks and posted the result here. Unfortunately the result wasn't really what I expected.

Read the article

What is a preferred method for automatically configuring and setting up an Ubuntu instance?

- by sutch

I am tired of manually configuring instances of Ubuntu for testing web applications and for setting up workstations. I'm even more frustrated by the issues caused by inconsistent configurations. Is there a method (hopefully not too time consuming to learn and setup) that allows for automation of the setup and configuration of an Ubuntu server or workstation from an ISO. This is primarily for virtual machine instances, but it would be helpful to also create instances on hardware. I am specifically looking for a method to automate the installation of libraries (apt-get), configure services (such as Apache and MySQL), add 3rd party software (download, extract and build), and add libraries to scripting languages (for example, Ruby Gems or CPAN packages for Perl).

Read the article

Instructions to setup domain controller

- by Robert Koritnik

Where could I get best step by step instructions (with some simple explanations) how to setup domain controller on Windows Server 2008 R2 Server Core? I don't know what do I need? Do I need DNS as well and AD and so on and so forth. I don't know enough about these things, but I need to set them up to prepare development environment. I would also like to know how to configure firewall on DC machine, to make it visible on other machines because I've setup DC somehow but I can't connect to it... This is my HW config: Linksys internet router with DHCP my dev machine is Windows 7 my DC machine is a VM in my dev machine my dev machine has a network adapter to linksys and a virtual adapter to DC DC machine has two network adapters: one to linksys (to be inetrnet connected) and one to host (my dev Win7 machine)

Read the article

vsFTPd and iptables - how to configure them in CentOS 5.5?

- by Vincenzo

I've installed vsFTPd in CentOS 5.5, on TWO servers, and added this rule to their iptable-s: -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 21 -j ACCEPT Looks like this is not enough, since when I'm trying to upload a file from one server to another, I'm getting this result (IP address is masked): # ftp 99.99.99.99 Connected to …com (99.99.99.99). 220 (vsFTPd 2.0.5) Name (99.99.99.99:root): vinny 331 Please specify the password. Password: 230 Login successful. Remote system type is UNIX. Using binary mode to transfer files. ftp> ls 227 Entering Passive Mode (99,99,99,99,107,74) ftp: connect: No route to host I've found a few articles in the net about the second rule I have to add to iptables, but I didn't find the right syntax for it. Could you please help?

Read the article

can not connect via SSH to a remote Postgresql database

- by tartox

I am trying to connect via pgAdmin3 GUI to a Postgresql database on a remote server myHost on port 5432. Server side : I have a Unix myUser that match a postgresql role. pg_hba.conf is : local all all trust host all all 127.0.0.1/32 trust Client side : I open an ssh tunnel : ssh -L 3333:myHost:5432 myUser@myHost I connect to the server via pgAdmin3 ( or via psql -h localhost -p 3333 ). I get the following error message : server closed the connection unexpectedly This probably means the server terminated abnormally before or while processing the request. I have tried to access a specific database with the superuser role using psql -h localhost -p 3333 --dbname=myDB --user=mySuperUser with no more success. What did I forget in the setup ? Thank you

Read the article

AWStats log format for tomcat access logs which has X-Forwarded-For

- by Nix

What should be the AWStats log format for below tomcat access logs ? I tried these formats but the external IP addresses are not coming into AWStats reports. LogFormat="%host %other %logname %time1 %methodurl %code %bytesd %refererquot %uaquot %referer %other %other" LogFormat="%other %other %logname %time1 %methodurl %code %bytesd %refererquot %uaquot %host_proxy" tomcat valve settings: pattern="%h %l %{USER_ID}s %t "%r" %s %b "%{Referer}i" "%{User-Agent}i" "X-Forwarded-For=%{X-Forwarded-For}i" "JSESSIONID=%{JSESSIONID}c" %D" Log entry: 127.0.0.1 - - [04/Nov/2013:13:39:55 +0000] "GET / HTTP/1.1" 200 12345 "https://www.google.com/url?some_url" "Mozilla/5.0 (Windows NT 6.3; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/30.0.1599.101 Safari/537.36" "X-Forwarded-For=real_ip, proxy_server_internal_ip" "JSESSIONID=-" 12345

Read the article

Connecting to FileZilla FTP Server on XAMPP localhost with Dreamweaver

- by Keyslinger

I am running XAMPP 1.7.4. I've installed the FileZilla FTP server and I'm running it as a service. I created a user and when I connect as that user with the FileZilla client, I have no trouble connecting. However, in Dreamweaver CS5 when I create a site using the Manage Sites dialog and go to configure its FTP settings, I get a message that reads An FTP error occurred - cannot make connection to host. and goes on to list some possible causes and solutions. I have tried setting the connection as passive to no avail. I understand that it is not necessary to use FTP when I am editing the site locally, but it is for a Dreamweaver class I am teaching and I want my students to learn to use Dreamweaver's FTP tools. How can I make my localhost FTP connection work in Dreamweaver?

Read the article

windows 7 frequently crashes when running 64 bit debian on virtualbox

- by erin c

I've been having some hard times with Virtualbox. I use it to run 64-bit Debian guest on a Windows 7 host to be able to code for linux systems. It generally crashes when I build my code in eclipse cdt, or if I am doing some intensive operations. Should I lower the memory and core usage? Is this some sort of virtualbox problem? I upgraded to virtualbox v4.1.8 and the problem still occurs. My virtual machine instance uses 1736MB out of 4GB of ram, and I use 2 out of 8 processor cores. But still, the whole thing crashes 1 or 2 times every single day.

Read the article

dhclient and dhcpcd the real difference

- by rubixibuc

I can't figure out the difference from just the man pages. I can see what is a daemon and one is a client, but what does that mean practically when using the commands? Also what is the difference between the client and daemon in this case, not just the terms (client and daemon) but functionally wise? EDIT: How are the tasks divided, if the client updates the information on the client, what is the purpose of the daemon. I'm talking about the client daemon in this case dhcpcd not dhcpd. Both come installed by default with some versions of Linux and seem to share the duties of the dhcp client. NAME dhcpcd - DHCP client daemon Name dhclient - Dynamic Host Configuration Protocol Client

Read the article

How can I force Firefox to select the tab to the right on tab close?

- by Philip

I'm using TMP 0.3.8.2 and a host of other extensions on FF 3.6.3 on OSX 10.6. I've tried disabling all other extensions that might interfere with tab settings but it's hard to keep track of everything because I have literally 60 (about 30 are disabled though) that are on and off in various configurations. I'm wondering if there's a way to FORCE Firefox to select the tab to the right on closing a tab, in such a way that it overrides any other setting anywhere else. I realize the prospects for this are dim. Thanks.

Read the article

fail2ban on server with LXC Containers

- by RoboTamer

The issue is modprobe and iptables don't work inside an LXC Container. LXC is the userspace control package for Linux Containers, a lightweight virtual system mechanism sometimes described as “chroot on steroids”. iptables error inside the container is: # iptables -I INPUT -s 122.129.126.194 -j DROP > iptables v1.4.8: can't initialize iptables table `filter': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. I am guessing that it can't work because the LXC containers share one kernel, the main server kernel. How do I do fail2ban in this case. modprobe and iptables work in the main server so I could install it there and link to the logfiles somehow, my guess? Any suggestions?

Read the article

How to enable RDP to a Server 2008 R2 on another network? VM network

- by Saariko

I have a W2008 R2 installed on a different network (I am on 192.168.0.x - new server on 192.168.3.x) I had trouble ping and RDP to it. I disabled the firewall to test the connection: and that opened the ping feature but I still can not RDP to that machine. the allow remote access is enabled As per sinni80 idea - Here is the error message The networks are divided by a Fortigate 60-B router - 2ndy interface for the gateway is 192.168.3.254 (and pingable from all) any to any rule on both networks is in place. As per Joe Schmoe idea - I am able to RDP to 192.168.3.1 from 192.168.3.3 (which is on the same network) Data to add: - The servers are on a VM host, each of the servers has 2 nics one is DHCP enabled into the 192.168.0.x network 2nd is static IP in the 192.168.3.x -- Further information: The network 192.168.0.x - are on a domain network (active Directory) The network 192.168.3.x - are grouped in a workgroup What should I check more please?

Read the article

How to to specify network address for a dhcp client

- by drecute

I have setup and configured a DHCP server on a sparc running Solaris 10. Now I want to test the DHCP server by creating a DHCP client on another computer running Solaris 11. I would like to know, how do I specify a network address for a dhcp client such that its generated ip address is within a specific subnet. For example: The DHCP server host = 172.1.1.1 So I want the client machine to have an IP Address in the range of 172.1.1.1 255.255.255.0. Please help me.

Read the article

how to create xampp mysql remote connection within my office ,

- by Ranjit Kumar

Before asking this question : i have gone through this link How do I allow remote access to mysql using xampp? But i couldnt make it up !!! i have installed xampp using xamppinstaller.exe and its version is 3.1.0. i am heidisql Gui for database managament i tried the same by changing the # bind-address from "127.0.0.1" to my system ip address as # bind-address to "192.168.1.69" After changing and restarting my xampp mysql i went to other system and tried to login (hedisql) with the hostname 192.168.1.69 and it gave me an error saying Error 1130(0000): host' ....' is not allowed to connect to this mysql server. what should i do please help me !!

Read the article

apache, shibboleth, load balancing aliase, ssl

- by Nikolaidis Fotis

Good morning folks Could you give me a bit of help with the following problem ? I have a dns load balancing mechanism and an alias (hostAlias) which may point to host01, or host02 I want to configure apache and shibboleth to work with that alias. What happens is ... User types : https://hostAlias (it points to host01) apache host01 : redirect to shibboleth shibboleth host01 : redirect to **https://hostAlias.cern.ch/Shibboleth.sso/ADFS** Now, there are two cases. Either this time hostAlias will point again to host01 , or it will point to host02. If it points to host02, host01 will not get the anwser and the authentication fails. Also, about ssl certificates, I guess that each host will need its own certificate. right ? Should I need a certificate with DNS aliases ? Thanks in advance !

Read the article

ASA 5505 Vlan question

- by Wayne

I am setting up a cisco asa 5505 with the base license. I can communicate from inside-outside, outside-inside, inside-home, which is my desired traffic security. I can get http, ssh, and other access from inside-home, but I can't ping from inside-home (192.168.110.0 host to 192.168.7.1 or 192.168.7.0 host). Can someone explain. My config is listed below interface Vlan1 nameif inside security-level 100 ip address 192.168.110.254 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 pppoe client vpdn group birdie ip address removedIP 255.255.255.255 pppoe ! interface Vlan3 no forward interface Vlan1 nameif home security-level 50 ip address 192.168.7.1 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 switchport access vlan 3 ! interface Ethernet0/5 shutdown ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! ftp mode passive clock timezone EST -5 clock summer-time EDT recurring access-list Outside-In extended permit icmp any any access-list Outside-In extended permit tcp any any eq www access-list Outside-In extended permit tcp any any eq https access-list Outside-In extended permit tcp any any eq 5969 access-list inside_nat0_outbound extended permit ip any 192.168.111.0 255.255.255.224 access-list standardUser_splitTunnelAcl1 extended permit ip 192.168.111.0 255.255.255.0 any access-list standardUser_splitTunnelAcl1 extended permit ip 192.168.110.0 255.255.255.0 any access-list inside_in extended permit icmp any any access-list inside_in extended permit ip any any access-list home_in extended permit icmp any any access-list home_in extended permit ip any any pager lines 24 logging enable logging asdm informational mtu inside 1492 mtu outside 1492 mtu home 1500 ip local pool vpnuser 192.168.111.5-192.168.111.20 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-524.bin no asdm history enable arp timeout 14400 nat-control global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 nat (home) 1 192.168.7.0 255.255.255.0 static (inside,outside) tcp interface https 192.168.110.6 https netmask 255.255.255.255 static (inside,outside) tcp interface www 192.168.110.6 www netmask 255.255.255.255 static (inside,outside) tcp interface 5969 192.168.110.12 5969 netmask 255.255.255.255 static (inside,home) 192.168.110.0 192.168.110.0 netmask 255.255.255.0 access-group inside_in in interface inside access-group Outside-In in interface outside access-group home_in in interface home route outside 0.0.0.0 0.0.0.0 RemovedIP 1

Read the article

What hardware is at physical address 0x80000000 on powerpc New World Macintosh?

- by tinkerer

Open Firmware device tree gives no clue what device might decode at physical address 0x80000000 to 0x8008200 on a G4 New World Macintosh. The mmu has three adjacent Virtual=Real translations for that block. They are the only address translations reported between the top or physical dram at 20000000 and the start of the PCI bridges at f0000000. (A possible clue is that frame-buffer-addr is reported as 9c008000 by Open Firmware, and that is not in the reported translation table either). I believe the architecture has been around since about 1999.

Read the article

Apache https configurations

- by sissonb

I am trying to setup my domain name with a self signed cert. I created the cert and placed the server.key and server.crt files into C:/apache/config/ Then I updated my httpd.confg host to include the following, <VirtualHost 192.168.5.250:443> DocumentRoot C:/www ServerName mydomain.com:443 ServerAlias www.mydomain.com:443 SSLEngine on SSLCertificateFile C:/apache/conf/server.crt SSLCertificateKeyFile C:/apache/conf/server.key SSLVerifyClient none SSLProxyEngine off SetEnvIf User-Agent ".*MSIE.*" \ nokeepalive ssl-unclean-shutdown \ downgrade-1.0 force-response-1.0 CustomLog logs/ssl_request_log \ "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b" </VirtualHost> Now when I go to https://mydomain.com I get the following error. SSL connection error Unable to make a secure connection to the server. This may be a problem with the server, or it may be requiring a client authentication certificate that you don't have. Error 107 (net::ERR_SSL_PROTOCOL_ERROR): SSL protocol error. Can anyone see what I'm doing wrong? Thanks!

Read the article

How do I set up a bridge on Ubuntu GNOME 14.04

- by NJRandy

I found a guide for setting up a bridge in Fedora and was trying this: $ nmcli connection delete p33p1 $ nmcli connection add con-name br0 type bridge ifname br0 autoconnect yes $ nmcli connection add con-name p33p1 type bridge-slave ifname p33p1 master br0 autoconnect yes I found that $ nmcli con delete uuid [uuid here] accomplished the first step. nmcli connection does not have an 'add' action in this distribution. Please help me do the 2nd and 3rd steps. Context: I am trying to set up a virtual machine. I believe this is a necessary step for the VM to access my network and the internet. Please feel free to correct me if I am wrong! BTW, I am a linux newbie, tech oldie. Thank you.

Read the article

kloxo setup error

- by ron

Hi, i've just purchased vps from 2host, its unmanaged. the support told me to install kloxo. However i got the ff errors in step 1: --begin-- root@vpshostingtips:~# wget http:// download.lxlabs . com/download/kloxo/production/kloxo-install-master.sh --2010-05-06 04:17:04-- http:// download.lxlabs . com/download/kloxo/production/kloxo-inst all-master.sh Resolving download.lxlabs.com... failed: Temporary failure in name resolution. wget: unable to resolve host address `download.lxlabs.com' root@vpshostingtips:~# --end-- Note: i split the hyperlinks intentionally to post here can somebody tell me whats the reason for error? sorry so new to vps.

Read the article

Keepalived with apache unable to bind interface on Backup server

- by davideagle

I have two debian 6 servers running keepalived 1.1.20 with one server acting as a Master and the other as a Backup. Both servers host apache 2.4 that have a global Listener on all interfaces on port 80 (Listen *:80) how ever I have some sites that require a listener for port 443 (SSL) and that is configured for each VirtualHost in the Apache config since I do not want every VirtualHost to listen on port 443. The problem is when I try to start Apache on the Backup machine that does not hold the virtual interface the VirtualHost is supposed to be listening on, I get AH00072: make_sock: could not bind to address 1.1.1.1:443. I know this is expected behavior of Apache. The real question is are there any known workarounds or solutions to this scenario?

Read the article

Postfix/dovecot remove LDAP user

- by dove221

I have to remove or blacklist an LDAP/dovecot user. The authentication is setup from active directory what I cannot manage so I thought there should be a way at least to disable this specific user on the mailserver locally. # Virtual Accoutns - LDAP - MS AD virtual_mailbox_maps = ldap:/etc/postfix/ldap_mailbox_maps.cf virtual_alias_maps = ldap:/etc/postfix/ldap_alias_maps_redirect_true.cf ldap:/etc/postfix/ldap_alias_maps_redirect_false.cf ldap:/etc/postfix/ldap_mailbox _groups.cf virtual_mailbox_domains = domain.com virtual_uid_maps = static:1000 virtual_gid_maps = static:1000 virtual_transport = dovecot dovecot_destination_recipient_limit = 1 Anybody knows how to do it? I followed this guide for disabling 1 user through postfixes access file: http://www.cyberciti.biz/faq/howto-blacklist-reject-sender-email-address/ Unfortunately it doesn't work. It's like the settings stored in LDAP are overruling the access rule. Instead of postfix rejecting the mail it keeps accepting it. Thanks!

Read the article

OpenVPN Permission Denied Error

- by LordCover

I am setting OpenVPN up, and I'm in the state of adding users. Details: Host System: Windows Server 2003 32-bit. Guest System: Ubuntu Linux (with OpenVPN installed already), actually I downloaded it from OpenVPN.Net. Virtualization: VMWare v7.0 Problem: I can access the Access Server web portal (on the port 5480), but when I login to http://host_ip:943/admin and enter my (correct) login info, it shows me a page saying that "You don't have enough permissions". I am the (root) user!!!! that is really weird!!! Note: if I enter wrong login it will denote an incorrect login, this means that I am logging in successfully but the problem comes after the login process. What I tried: I tried to create another user after (root) logging in to Linux Bash using (useradd) command, but the same resulted.

Search Results

Search found 20099 results on 804 pages for 'virtual host'.

Page 516/804 | < Previous Page | 512 513 514 515 516 517 518 519 520 521 522 523 | Next Page >

- by huahsin68

- by Solignis

- by vpetersson

- by sutch

- by Robert Koritnik

- by Vincenzo

- by tartox

- by Nix

- by Keyslinger

- by erin c

- by rubixibuc

- by Philip

- by RoboTamer

- by Saariko

- by drecute

- by Ranjit Kumar

- by Nikolaidis Fotis

- by Wayne

- by tinkerer

- by sissonb

- by NJRandy

- by ron

- by davideagle

- by dove221

- by LordCover

< Previous Page | 512 513 514 515 516 517 518 519 520 521 522 523 | Next Page >