Search Results

Search found 18677 results on 748 pages for 'current'.

Page 517/748 | < Previous Page | 513 514 515 516 517 518 519 520 521 522 523 524  | Next Page >

• Benchmarking a file server

  - by Joel Coel

  I'm working on building a new file server... a simple Windows Server box with a few terabytes of disk space to share on the LAN. Pain for current hard drive prices aside :( -- I would like to get some benchmarks for this device under load compared to our old server. The old server was installed in 2005 and had 5 136GB 10K disks in RAID 5. The new server has 8 1TB disks in two RAID 10 volumes (plus a hot spare for each volume), but they're only 7.2K rpm, and of course with a much larger cache size. I'd like to get an idea of the performance expectations of the new server relative to the old. Where do I get started? I'd like to know both raw potential under different kinds of load for each server, as well an idea of what our real-world load looks like and how it will translate. Will disk load even matter, or will performance be more driven by the network connection? I could probably fumble through some disk i/o and wait counters in performance monitor, but I don't really know what to look for, which counters to watch, or for how long and when. FWIW, I'm expecting a nice improvement because of the benefits of having two different volumes and the better RAID 10 performance vs RAID 5, in spite of using slower disks... but I'd like to get an idea of how much.

  Read the article

• Unexplained CPU and Disk activity spikes in SQL Server 2005

  - by Philip Goh

  Before I pose my question, please allow me to describe the situation. I have a database server, with a number of tables. Two of the biggest tables contain over 800k rows each. The majority of rows are less than 10k in size, though roughly 1 in 100 rows will be 1 MB but <4 MB. So out of the 1.6 million rows, about 16000 of them will be these large rows. The reason they are this big is because we're storing zip files binary blobs in the database, but I'm digressing. We have a service that runs constantly in the background, trimming 10 rows from each of these 2 tables. In the performance monitor graph above, these are the little bumps (red for CPU, green for disk queue). Once ever minute we get a large spike of CPU activity together with a jump in disk activity, indicated by the red arrow in the screenshot. I've run the SQL Server profiler, and there is nothing that jumps out as a candidate that would explain this spike. My suspicion is that this spike occurs when one of the large rows gets deleted. I've fed the results of the profiler into the tuning wizard, and I get no optimisation recommendations (i.e. I assume this means my database is indexed correctly for my current workload). I'm not overly worried as the server is coping fine in all circumstances, even under peak load. However, I would like to know if there is anything else I can do to find out what is causing this spike? Update: After investigating this some more, the CPU and disk usage spike was down to SQL server's automatic checkpoint. The database uses the simple recovery model, and this truncates the log file at each checkpoint. We can see this demonstrated in the following graph. As described on MSDN, the checkpoints will occur when the transaction log becomes 70% full and we are using the simple recovery model. This has been enlightening and I've definitely learned something!

  Read the article

• ubuntu 9.10 cups server cupsd.conf

  - by aaron

  i have a cups server running on ubuntu 9.10 on my home network. right now i can access it at 192.168.1.101:631, but when i try to access it at myservername.local:631 i get a 400 Bad Request. here's the relevant section from my current cupsd.conf: ServerName 192.168.1.101 # Only listen for connections from the local machine. Listen localhost:631 Listen /var/run/cups/cups.sock # any of the below 'Listen' directives all yield the same result Listen 192.168.1.101:631 #Listen *:631 #Listen myservername.local:631 # Show shared printers on the local network. Browsing On BrowseOrder allow,deny BrowseAllow all BrowseLocalProtocols CUPS dnssd BrowseAddress 192.168.1.255 # Default authentication type, when authentication is required... DefaultAuthType Basic # Restrict access to the server... <Location /> Order deny,allow Deny from All Allow from 127.0.0.1 Allow from 192.168.1.* </Location> # Restrict access to the admin pages... <Location /admin> Order deny,allow Deny from All #Allow from 127.0.0.1 #Allow from 192.168.1.* </Location> # Restrict access to configuration files... <Location /admin/conf> AuthType Default Require user @SYSTEM Order deny,allow Deny from All #Allow from 127.0.0.1 #Allow from 192.168.1.* </Location> i get the following in /var/log/cups/error_log: E [03/Jan/2010:18:33:41 -0600] Request from "192.168.1.100" using invalid Host: field "myservername.local:631" what do i need to do to be able to access the cups server at both 192.168.1.101:631 and myservername.local:631?

  Read the article

• lftp cannot connecto to IIS

  - by ruyrocha

  Hello, I can not connect to IIS using lftp as you can see here: <--- 200 Language is now English, UTF-8 encoding. ---> OPTS UTF8 ON <--- 200 OPTS UTF8 command successful - UTF8 encoding now ON. ---> HOST x.x.x.x <--- 504 Server cannot accept argument. ---> USER bla <--- 331 Password required for hgtrf. ---> PASS blabla <--- 230 User logged in. ---> PWD <--- 257 "/" is current directory. ---> PBSZ 0 <--- 200 PBSZ command successful. ---> PROT P <--- 534 Policy denies SSL. ---> PASV <--- 227 Entering Passive Mode (x.x.x.x,194,118). ---- Connecting data socket to (x.x.x.x) port 49782 **** Socket error (Connection refused) - reconnecting ---> LIST ---> ABOR ---- Closing aborted data socket ---- Closing control socket I could connect, list, retrieve and send files using standard ftp command. Do you have any suggestion?

  Read the article

• Why can't “knife data bag from file” find existing json file on chef server?

  - by ellisera

  Summary: I'm running into a problem with "knife data bag from file", where knife doesn't recognize the .json data bag file pulled down from a remote git repo. Background: I'm currently trying to transition from chef-solo use to chef server while using the cookbooks, data bags and other chef info from our remote git repo. I've currently pulled down a copy of our git repo and set the cookbook path and data bag path in knife.rb. I also loaded the cookbooks, made adjustments, etc. Details: When trying to load our .json data bags by doing "knife data bag add from file FOLDER FILE" it looks like it worked until I do "knife data bag list" and it comes up blank. So I decided to try adding the edit option at the end to see what's being loaded, if it is. This is the error I get: knife data bag from file local_settings test.json -e nano ERROR: Could not find or open file 'test.json' in current directory or in 'data_bags/local_settings/test.json' The data bag file does exist, in the proper location, in a tested, working json file. I've also sometimes gotten an error saying "could not open data bag "local_settings". I would obviously like to keep the data bag path within the appropriate git repo folder to be able to keep track of changes in a more centralized location (our git repo, as opposed to the chef server). Any solutions, advice or pointers in the right direction are appreciated.

  Read the article

• Authentication on Exchange using EWS managed API

  - by Jacob Proffitt

  I'm having a weird issue with the Exchange Web Services. The operation I'm attempting is pretty simple—pull a user's calendar items for the current week on our internal website. When testing locally, the ews managed API pulls the calendar information just fine. When deployed to the web server (using integrated windows authentication), it chokes. My trace is telling me that access is denied in the Exchange call. Initially, I thought this was a double-hop NTLM permissions issue, but it turns out that the service actually works for some internal users, but not for most. The only thing I can find that the functioning users have in common is that they are blackberry users and I surmise that their exchange permissions are setup differently. Or are their active directory accounts setup differently? I don't know and it's driving me crazy. I surmise that the blackberry app runs some scripts when a user is added to the application, but I'm completely unfamiliar with what may be going on behind the scenes there. So. Is there a way to duplicate the permissions those users enjoy (either AD or Exchange permissions)? And/or how exactly does one fix the double-hop credentials situation?

  Read the article

• cPanel web servers mounting home partition to a NAS or SAN

  - by Scott

  Hello, I currently have 2 cPanel web servers that are little 1RU dual cpu quad core xeons. They have a lot of resources for processing and handling web requests, and never exceed more than 10% cpu usage. They also have plenty of RAM. The problem is though that they both have RAID 1 160Gb SAS hard disk drives in them that are 75% full, and growing by the day. I didnt think that the amount of disk usage would be so high, but due to the nature of the sites hosted, this has become an issue. The easy fix would be just to upgrade the hard drives to something bigger (probably not of the SAS variety), but I am thinking of keeping the current machines as "processing servers" and buying a central "storage server" with about 12TB of storage. The /home/ partition on each of the 1RU servers would be mounted to a NAS or SAN point on this central storage server. My questions are: - Has anyone got a cPanel setup where they mount /home/ to a NAS or SAN elsewhere? If so, can you provide details as to what you did and how it went :) - Any recommendations on networking? Is gigabit ethernet enough? Is TCP/IP going to be a noticable performance problem? Anyone used a TOE key? - Anyone benchmarked or had any performance issues with SAN over NAS? Any help greatly appreciated. Scott

  Read the article

• How do I locate the app generating this network traffic?

  - by Christopher Bartels

  I don't know what this process is doing on my computer. I run Windows 7 Professional w/ all its updates running current non-free antivirus. I only see it in Resource Monitor, where you can see the Network Service process connected to bitum.nnov.ru. When my PC's network traffic generating apps are idle, this process is using the most of all the idle processes using the network. Screenshot hosted here: http://sss.proinbox.com/bitum-nnov-ru.jpg Does anyone recognize this? The page source mentions a control port & a stream port: Page Source for http://bitum.nnov.ru : <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <title>DVR WebViewer</title> <meta http-equiv="Content-Type" content="text/html; charset=euc-kr"> </head> <body topmargin="0" leftmargin="0"> <OBJECT classid="clsid:EE479A40-C128-40DD-93DA-000556AF9607" codebase="CtrWeb.cab#version=1,0,2,2" width=875 height=585 align=center hspace=0 vspace=0 > <param name="CmdPort" value="5920"> <param name="StreamPort" value="5921"> </body> </html> When I google this page's title, I see a number of other domains that host the same page. Whois: domain: NNOV.RU nserver: ns.kis.ru. nserver: ns.nnov.ru. 78.25.80.210 nserver: ns1.kis.ru. nserver: ns2.kis.ru. state: REGISTERED, DELEGATED, VERIFIED org: "Agentstvo Delovoj Svjazi", Ltd registrar: RU-CENTER-REG-RIPN admin-contact: https://www.nic.ru/whois created: 1996.10.23 paid-till: 2012.11.01 free-date: 2012.12.02 source: TCI Last updated on 2012.06.16 04:20:46 MSK

  Read the article

• Apache log rotation: logrotate vs rotatelogs vs chronolog

  - by Enrico

  I have been researching log rotation for my server which hosts ~5 fairly high traffic sites. From what I can tell, my options are to use logrotate or to use piped logging with either rotatelogs or chronolog. logrotate requires a restart of apache and both SIGHUP and SIGUSR1 restarts are less than ideal on high traffic sites, because either you drop a bunch of connections or you need to delay compressing the old log until all child processes have died naturally. Also, downtime can be quite significant if compression is enabled. Would using logrotate - without compression and with graceful restart - and compressing old logs after the fact be the best way to minimize downtime? chronolog and rotatelogs sound promising, but are not well documented. I couldn't find examples of using either in combination with vhost specific logs. The chronolog website says, "when the expanded filename changes, the current file is closed and a new one opened". Is this globally? Or is that per AccessLog, CustomLog or ErrorLog directive? Is there a significant difference between chronolog and rotatelogs?

  Read the article

• Spreadsheet RDBMS

  - by John Nilsson

  I'm looking for a software (or set of software) that will let me combine spreadsheet and database workflows. Data entry in spreadsheet to enable simple entry from clipboard, analysis based on joins, unions and aggregates and pivot/data pilot summaries. So far I've only found either spreadsheets OR db applications but no good combination. OO base with calc for tables doesn't support aggregates f.ex. Google Spreadsheet + Visualizaion API doesn't support unions or joins, zoho db doesn't let me paste from clipboard. Any hints on software that could be used? Basically I'm trying to do some analysis of my personal bank transactions. Problem 1, ETL. The data has to be moved from my bank to a database. My current solution is to manually copy and paste the data into one spread sheet per account from my internet bank. Pains: Not very scriptable. Lots of scrolling to reach the point to paste. Have to apply sorting and formatting to the pasted data each time. Problem 2, analysis. I then want to aggregate the different accounts in one sweep to track transfers per type of transfer over all accounts. The actual aggregation is still unsolved because I can't find a UNION equivalent in the spreadsheets I've tried.

  Read the article

• Getting 401 when using client certificate with IIS 7.5

  - by Jacob

  I'm trying to configure a web site hosted under IIS 7.5 so that requests to a specific location require client certificate authentication. With my current setup, I still get a "401 - Unauthorized: Access is denied due to invalid credentials" when accessing the location with my client cert. Here's the web.config fragment that sets things up: <location path="MyWebService.asmx"> <system.webServer> <security> <access sslFlags="Ssl, SslNegotiateCert"/> <authentication> <windowsAuthentication enabled="false"/> <anonymousAuthentication enabled="false"/> <digestAuthentication enabled="false"/> <basicAuthentication enabled="false"/> <iisClientCertificateMappingAuthentication enabled="true" oneToOneCertificateMappingsEnabled="true"> <oneToOneMappings> <add enabled="true" certificate="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"/> </oneToOneMappings> </iisClientCertificateMappingAuthentication> </authentication> </security> </system.webServer> </location> The client certificate I'm using in my web browser matches what I've placed in the web.config. What am I doing wrong here?

  Read the article

• SSH Tunnel for Remote Desktop via Intermediary Server Part II

  - by Mihai Todor

  I asked previously how to configure 2 SSH tunnels using an intermediary server in order to run Remote Desktop through them and I managed to make it work. Now, I'm trying to do the same, using the same machines, but in reverse order. Here's the setup: Windows 7 PC in a private network, sitting behind a firewall. Public access Linux server, which has access to the PC. Windows 7 laptop, at home, on which I wish to do Remote Desktop from the PC. I use Putty on the laptop to create a reverse tunnel from it to the Linux server: R60666 localhost:3389. I use Putty on the PC to create a regular tunnel from it to the Linux server: L60666 localhost:60666. I SSH to the Linux sever and I run telnet localhost 60666 and it seems to produce the expected output, as described in the debugging tips that I received here. I try to connect Remote Desktop from the PC to the laptop: localhost:60666. It asks for my username and password, I click OK and it locks my current session on the laptop (so I see the welcome screen on the laptop instead of my desktop), it shows the "Welcome" message in the Remote Desktop screen and then it just goes black. It doesn't disconnect, it doesn't provide any error and I'm not able to perform any actions in the Remote Desktop screen. I tried the same setup with a Windows XP laptop and I'm experiencing the same symptoms. I also tried to use different ports than 60666, but nothing changed. Does anybody have any idea what I'm doing wrong? Update: As pointed out by @jwinders, I'm not able to run telnet PC 3389 from the Linux server directly. Since Windows Firewall has a rule to allow all connections on port 3389, I have no idea what is blocking it. Fortunately, I'm able to create a SSH tunnel from the Linux machine to the PC ssh 3389:localhost:3389 'domain\user'@PC.

  Read the article

• SSL on nginx + unicorn got "Error 102 (net::ERR_CONNECTION_REFUSED)"

  - by panggi

  I tried to deploy my app on EC2 (opened port: 22, 80, 443) App: Rails 3.2.2 Server: nginx 1.2.1 unicorn gem (latest) ubuntu 12.04 Deployer: Capistrano I tried to follow the instruction in Railscasts : http://railscasts.com/episodes/335-deploying-to-a-vps (Sorry, it's a Pro Episode) Anything fine with normal port 80 http but i got Error 102 after trying to use SSL, here is the nginx.conf content: upstream unicorn { server unix:/tmp/unicorn.frontend.sock fail_timeout=0; } server { server_name beta.sukeru.com; listen 443 default; root /home/deployer/apps/appname/current/public; ssl on; ssl_certificate server.crt; ssl_certificate_key server.key; ssl_session_timeout 5m; ssl_protocols SSLv2 SSLv3 TLSv1; ssl_ciphers HIGH:!aNULL:!MD5; ssl_prefer_server_ciphers on; location / { proxy_set_header Host $host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-Forwarded-Proto https; proxy_redirect off; proxy_pass http://unicorn; } error_page 500 502 503 504 /500.html; } In production.rb i set: config.force_ssl = true Can anyone give a solution for this? :)

  Read the article

• How can I fix my corrupted RAID1 ext4 partition on a Synology DS212 NAS?

  - by Neil

  I have two identical 3 TB disks that were in a RAID1 array, where one disk crashed. I replaced the failed disk, but not after the RAID partitions got messed up. I need to figure out how to restore the RAID array and get at my ext4 partition. Here are the properties of the surviving disk: # fdisk -l /dev/sda fdisk: device has more than 2^32 sectors, can't use all of them Disk /dev/sda: 2199.0 GB, 2199023255040 bytes 255 heads, 63 sectors/track, 267349 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 1 267350 2147483647+ ee EFI GPT # parted /dev/sda print Model: ATA ST3000DM001-9YN1 (scsi) Disk /dev/sda: 3001GB Sector size (logical/physical): 512B/512B Partition Table: gpt Disk Flags: Number Start End Size File system Name Flags 1 131kB 2550MB 2550MB ext4 raid 2 2550MB 4698MB 2147MB linux-swap(v1) raid 5 4840MB 3001GB 2996GB raid I replaced the failed drive, and cloned the surviving drive to it so I have something to work with. I cloned the drives with dd if=/dev/sdb of=/dev/sda conv=noerror bs=64M, and now /dev/sda and /dev/sdb are identical. Here is the RAID information: # cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] md1 : active raid1 sdb2[1] 2097088 blocks [2/1] [_U] md0 : active raid1 sdb1[1] 2490176 blocks [2/1] [_U] unused devices: <none> It seems that md2 is missing. Here is what testdisk 6.14-WIP finds: Disk /dev/sda - 3000 GB / 2794 GiB - CHS 364801 255 63 Current partition structure: Partition Start End Size in sectors 1 P Linux Raid 256 4980735 4980480 [md0] 2 P Linux Raid 4980736 9175039 4194304 [md1] Invalid RAID superblock 5 P Linux Raid 9453280 5860519007 5851065728 5 P Linux Raid 9453280 5860519007 5851065728 # After a quick search Disk /dev/sda - 3000 GB / 2794 GiB - CHS 364801 255 63 Partition Start End Size in sectors D MS Data 256 4980607 4980352 [1.41.12-2197] D Linux Raid 256 4980735 4980480 [md0] D Linux Swap 4980736 9174895 4194160 D Linux Raid 4980736 9175039 4194304 [md1] >P MS Data 9481056 5858437983 5848956928 [1.41.12-2228] And listing the files on the last partition in the list shows all of my files intact. What should I do?

  Read the article

• Dell Poweredge 2600 RAID Transfer How-to

  - by DCookie

  Help, please! Hardware: Dell Poweredge 2600 PERC 4 SCSI Drives, 1 standalone 3 in a RAID 5 configuration OS: Windows 2000 Server In other words, a fairly old system. Anyway, we are in the process of taking over support for this site. The current tech wants out and is fading from view fast, so we need to solve this problem: The standalone disk (where the OS was) failed. We've replaced the disk, installed the OS, but need to know exactly how to proceed from here. I've never worked with a RAID system before, so I don't want to touch anything without knowing what I'm doing. We are not certain if the site will want us to attempt to recover the array or wait for the old tech to become available. We have replaced the server with a temporary box, and recovered MOST of the data from an online backup service. However, the other tech failed to backup a part of the data and the only copy of it is on this RAID array. Hence, our caution. We have poked minimally around in the boot-up PERC config utility, and it seems to me that that's where we'll need to be to reclaim the array. Another possibility is that there is some Dell software for the RAID controller we need to acquire. Can anyone provide clues as to how to proceed from here? Any help GREATLY appreciated.

  Read the article

• Parsing the output of "uptime" with bash

  - by Keek

  I would like to save the output of the uptime command into a csv file in a Bash script. Since the uptime command has different output formats based on the time since the last reboot I came up with a pretty heavy solution based on case, but there is surely a more elegant way of doing this. uptime output: 8:58AM up 15:12, 1 user, load averages: 0.01, 0.02, 0.00 desired result: 15:12,1 user,0.00 0.02 0.00, current code: case "`uptime | wc -w | awk '{print $1}'`" in #Count the number of words in the uptime output 10) #e.g.: 8:16PM up 2:30, 1 user, load averages: 0.09, 0.05, 0.02 echo -n `uptime | awk '{ print $3 }' | awk '{gsub ( ",","" ) ; print $0 }'`","`uptime | awk '{ print $4,$5 }' | awk '{gsub ( ",","" ) ; print $0 }'`","`uptime | awk '{ print $8,$9,$10 }' | awk '{gsub ( ",","" ) ; print $0 }'`"," ;; 12) #e.g.: 1:41pm up 105 days, 21:46, 2 users, load average: 0.28, 0.28, 0.27 echo -n `uptime | awk '{ print $3,$4,$5 }' | awk '{gsub ( ",","" ) ; print $0 }'`","`uptime | awk '{ print $6,$7 }' | awk '{gsub ( ",","" ) ; print $0 }'`","`uptime | awk '{ print $10,$11,$12 }' | awk '{gsub ( ",","" ) ; print $0 }'`"," ;; 13) #e.g.: 12:55pm up 105 days, 21 hrs, 2 users, load average: 0.26, 0.26, 0.26 echo -n `uptime | awk '{ print $3,$4,$5,$6 }' | awk '{gsub ( ",","" ) ; print $0 }'`","`uptime | awk '{ print $7,$8 }' | awk '{gsub ( ",","" ) ; print $0 }'`","`uptime | awk '{ print $11,$12,$13 }' | awk '{gsub ( ",","" ) ; print $0 }'`"," ;; esac

  Read the article

• Drive XML returning Windows Volume Shadow Service Error

  - by Ssvarc

  I'm trying to image a SATA laptop hard drive, using DriveImageXML, that is attached to my computer via a USB adapter. I'm running Win7 Ultimate 64 bit. DriveXML is returning: Could not initialize Windows Volume Shadow Service (VSS). ERROR C:\Program Files (x86)\Runtime Software\Drivelmage XML\vss64.exe failed to start. ERROR TIMEOUT Make sure VSSVC.EXE is running in your task manager. Click Help for more information. VSSVC.EXE is running in Task Manager, as is VSS64.exe. Looking at the FAQ on the Runtime webpage this turned up: Please verify in Settings-Control Panel-Administrative Tools-Services that the following services are enabled: MS Software Shadow Copy Provider Volume Shadow Copy Also make sure you are able to stop and start these services. Possible reasons for VSS failures: For VSS to work, at least one volume in your computer must be NTFS. If you use only FAT drives, VSS will not function. The required NTFS volume does not need to be identical with the volume you want to image. You should make sure that VSSVC.EXE is running in your task manager. If the problems persist, registering "oleaut.dll" and "oleaut32.dll" using "regsvr32" might help. Both of those services are running and can be started and stopped without issue. Using "regsvr32" to register ""oleaut32.dll" returns successful, but "oleaut.dll" returns: The module "oleaut.dll" failed to load. Make sure the binary is stored at the specified path or debug it to check for problems with the binary or dependent .DLL files. The specified module could not be found. Some other information that might be relevant. Browsing to the drive is successful, but accessing certain folders returns an "access" error. Windows runs a permissions adder that adds the current user profile to the NFTS permissions. Could this be the cause of the issue? DriveImage XML is running as Administrator. Thoughts?

  Read the article

• mysql weird connection problem

  - by santiago.basulto

  Hi guys! I've a weird problem. I've mysql 5.1 installed on my ubuntu 9.04. I've used it a long time (say 3 month) and everything was going right. Until i faced this really weird problem. When i want to connect to a random database i get this message: ERROR 2006 (HY000): MySQL server has gone away No connection. Trying to reconnect... Connection id: 1 Current database: test_cake ERROR 2006 (HY000): MySQL server has gone away No connection. Trying to reconnect... ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (111) ERROR: Can't connect to the server It only happens with some databases, while others are totally usefull and healthy. After that, if i try to restart the server i get this. shell /etc/init.d/mysql restart * Stopping MySQL database server mysqld cat: /var/run/mysqld/mysqld.pid: Permiso denegado [fail] * Starting MySQL database server mysqld cat: /var/run/mysqld/mysqld.pid: Permiso denegado cat: /var/run/mysqld/mysqld.pid: Permiso denegado cat: /var/run/mysqld/mysqld.pid: Permiso denegado cat: /var/run/mysqld/mysqld.pid: Permiso denegado cat: /var/run/mysqld/mysqld.pid: Permiso denegado cat: /var/run/mysqld/mysqld.pid: Permiso denegado cat: /var/run/mysqld/mysqld.pid: Permiso denegado cat: /var/run/mysqld/mysqld.pid: Permiso denegado cat: /var/run/mysqld/mysqld.pid: Permiso denegado cat: /var/run/mysqld/mysqld.pid: Permiso denegado cat: /var/run/mysqld/mysqld.pid: Permiso denegado cat: /var/run/mysqld/mysqld.pid: Permiso denegado cat: /var/run/mysqld/mysqld.pid: Permiso denegado cat: /var/run/mysqld/mysqld.pid: Permiso denegado cat: /var/run/mysqld/mysqld.pid: Permiso denegado cat: /var/run/mysqld/mysqld.pid: Permiso denegado [fail] ("permiso denegado" is "permission denied"). I don't know what to do. I change the /var/run/mysqld/mysqld.pid attributes but still not working. Can anybody help me ?

  Read the article

• Recommended motherboard with hardware raid for Linux

  - by luison

  Hi. We want to setup an internal office server for testing jobs (LAMP), email and samba. Only about 5-10 users. We are also considering starting to virtualize, initially by a base Ubuntu Server with Xen or VMWare Open Source server. Our current system runs with a Linux Raid which has worked great but it's always been complicated to recover the boot sector when one the drives fail and therefore I would prefer using now a hardware raid instead, but ideally with some kind of software monitoring. For this reason and considering we don't want to spend a fortune a I would appreciate any comments on the following options. Motherboard with RAID with linux support... which could you recommend. Motherboard + Hardware Raid card... Adaptec does not seem to have great Linux suppport. 3Ware seems to have a tc soft controller which we've used on a hosting company, but hard to find here in Spain. HP Proliant type basic server, which? Dell Small Servers... any good for Linux? Thanks in advance for any feedback.

  Read the article

• SAN Replication for Fault tolerance using EVA4400

  - by Sergei

  Hi Everyone, I hope that someone would point me in the correct direction - it looks like I have no enough konwledge in the subject and timeframes are too tight for me to explore different scenarios in depth.. We have two datacenters few miles away from each other connected by 100 Mbps link.Each datacenter will have 5 BL490 blades with ESX Standard hosting about 50 VMs. Eac hsite has HP eva4400 SAN with SAN replication set up.VC is going to be in the first datacenter and both datacenter are networked. SAN Replication is block level so it seems like I cannot just replicate changes but all writes would have to be replicated.This should not be a problem as link can sustain about 1.8 TB a dayand data can be buffered. I am having trouble however visioning how recovery would work in this case.We don't need instant recovery , I would say 4 hours recovery time is accepted so fancy automatic SRM like DR scenario would not be easily accepted due to the financial reasons, however any comments are welcomed. Current idea is following: replicate LUNs from primary site to the secondary.When disaster strikes, IT personnel switches on ESX hosts on the remote side and connects replicated LUNS to them, then registers VMs and changes IP address. I understand that this seems like horribly manual process and I almost sure I have missed some obvious pitfalls here. Could someone let me know what direction should I go?An articles regarding the subject? This is a brand new setup and we would rather build up basic recovery process and scale it later.I just need to have a right direction to allow for such scalability. Thank you very much in advance!

  Read the article

• How can I make my PCI-E graphics card visible to Ubuntu when the motherboard has integrated graphics

  - by Norman Ramsey

  I have a Gigabyte GA-MA74GM-S2 motherboard with integrated graphics that shows up on lspci as an ATI Radeon 2100. I also bought a PCI-Express Nvidia graphics card so I could use the VDPAU feature on Linux (plays H.264 in hardware). The BIOS has three settings about which display to initialize first: Integrated graphics PCI graphics PCI-Express graphics (PEG) I set the BIOS on PEG, but I cannot get anything, not even a splash screen or POST messages, to emerge from the PCI-Express graphics card. (I'm using a DVI connector; the card also has an HDMI output.) I cannot get the kernel lspci to see the graphics card; the only VGA controller it acknowledges is the integrated one. Running dmidecode acknowledges the existence of an x16 PCI Express slot, and it says Current usage: Unknown There is an additional BIOS setting called "Internal Graphics Mode" which is normally set to "Auto" which means it is supposed to prefer a PCI Express VGA card. I set it to "Disabled" which now means I'm getting no output at all. I will soon be learning how to do a BIOS reset! Other information: The PCI-E card is a MSI N210-MD512H GeForce 210. This is a fanless card. Although there are no fans to see turning, the heat sink on the PCI-E card is definitely getting hot, so the card is getting some sort of power. It gets all its power from the PCI-E slot; there is no external power connector. The BIOS is an AMI Award BIOS. My question: how can I make the PCI Express graphics card visible to Ubuntu?

  Read the article

• Advice needed: ADSL and VPN for a small company

  - by Saajid Ismail

  Hi. I need advice on purchasing an ADSL modem/router for a small company. At the moment, we are using the iBurst Wireless service for internet connectivity. I have the iBurst desktop modem, which connects to my Netgear WNR2000 router via ethernet. I am using the Netgear WNR2000 to deploy a wireless network as well. I have also set up a VPN using Windows Server 2003, and enabled the VPN Passthrough settings on the Netgear router. I am able to connect to the office network remotely without difficulty. However the problem that I've read is that the Netgear WNR2000 only supports VPN passthrough for a single session. This is simply not good enough. I need to be able to support at least 3 concurrent VPN connections immediately, and up to 5 in the near future. Now I am cancelling my iBurst Wireless service and have just got my ADSL line installed. I have to purchase an ADSL modem, and now is a good time to think of future proofing my investment. I need a good ADSL modem, that will allow me to support at least 5 concurrent VPN connections, or more, without breaking the bank. My budget is about 150-200 USD. I believe that my current Netgear WNR2000 router will be useless, except maybe to extend my wireless network in the future by a bit. Is there a solution where I can still use my Netgear WNR2000 for WiFi, for e.g., by connecting a cheaper non-WiFi ADSL modem to the Netgear router? If not, then which WiFi-enabled ADSL modem/router that supports at least 5 VPN passthroughs can you recommend? To sum it up, I need an ADSL modem/router that is: ADSL & ADSL2+ compatible has built-in 802.11n 270/300mbps WiFi (if having this feature doesn't push the price up too much) supports at least 5 VPN connections using VPN passthrough EDIT: Answer 2.10 in the following FAQ has me a bit worried - What is VPN/multiple VPN Pass-through?

  Read the article

• Errors when attempting to update source files, Server 2012R2 (errors 80073701 and 14081)

  - by jeremy

  I have a Windows Server 2012R2 machine that I installed with Server Core, and then decided that I wanted to switch to GUI. I'll make the long story short: I ran windows updates, and now the source files are older/out of sync with the operating system, and I need to update the source files. Here are a couple of articles that outline how this is supposed to work: http://blog.coretech.dk/kaj/why-i-cant-convert-my-windows-server-2012-r2-core-to-gui/ http://blogs.technet.com/b/joscon/archive/2012/11/14/how-to-update-local-source-media-to-add-roles-and-features.aspx I have followed these instructions, but the updates are not successfully updating the source. I get errors like: "An error occurred - Package_for_KB29671203 Error: 0x80073701, Error: 14081, The referenced assembly could not be found." or "add-windowspackage failed. error code = 0x80073701, add-windowspackage: the referenced assembly could not be found" I've extensively searched for help on those error codes related to Server 2012 and windows updates, but my google-fu is failing me. I am using windows update packages found in c:\Windows\SoftwareDistribution\Download How can I get these updates to bring my source files up to current? Thanks!

  Read the article

• Problem with switch dell 6224

  - by Matias

  Hello, we just have upgraded the firmware of a dell 6224 power connect switch and it won't reload. These are the symptons: - I power up the switch having the serial cable connected to it and the switch outputs nothing. The configuration of the serial console is fine: 9600 bds, etc... In fact, before the upgrade, I was connected to the switch through the very same cable. - Reseting the switch with its reset pinhole does not reset the switch: the power and fan lights powers off while I keep pressed the pinhole, but the switch itself does not resets. - When I connect an UTP cable to one of the switches port, the green lights don't flash, but ''mii-tool eth0'' in my laptop shows there is link!! The only thing I see in the output, different from other upgrades I've done, is this line at the end: Erasing Boot Flash.....^^^^Done. Any help or idea will be more than welcome!! Thanks!! console#show version Image Descriptions image1 : image2 : Images currently available on Flash -------------------------------------------------------------------- unit image1 image2 current-active next-active 1 <none> 3.0.0.8 image2 image2 console#boot system image2 Activating image image2 .. console#update bootcode Update bootcode and reset (Y/N)? Updating boot code ... Extracting boot code from image... Erasing Boot Flash.....^^^^Done.

  Read the article

• VMWare Fusion: "No Permission to access this virtual machine"

  - by Craig Walker

  I had a VMWare Fusion VM backed up on my home network file server (Ubuntu). I wanted to run it again, so I copied it back to my Macbook. When I tried to launch it in VMWare, I got an error message: No permission to access this virtual machine. Configuration file: /Users/craig/WinXP Clean + Scanner.vmwarevm/WinXP Pro Test.vmx The permissions look fine to me: The bundle directory is 777 The bundle files (including the listed .vmx) are all 666 User is craig (my current user); group is staff. I changed the group to wheel at the suggestion of this page, but that didn't help. Finder shows read & write for craig, staff, and everyone on the bundle directory The bundle dir is also not locked Finder also shows rw and unlocked for the .vmx file The parent directory is also rw & unlocked Disk Utility permissions check doesn't show any problems with any of the associated files It sure looks like I should have wide open access to run this VM; why is Fusion complaining?

  Read the article

< Previous Page | 513 514 515 516 517 518 519 520 521 522 523 524  | Next Page >