variable length arguments - Page 518

Password Security: Short and Complex versus ‘Short or Lengthy’ and Less Complex

- by Akemi Iwaya

Creating secure passwords for our online accounts is a necessary evil due to the huge increase in database and account hacking that occurs these days. The problem though is that no two companies have a similar policy for complex and secure password creation, then factor in the continued creation of insecure passwords or multi-site use of the same password and trouble is just waiting to happen. Ars Technica decided to take a look at multiple password types, how users fared with them, and how well those password types held up to cracking attempts in their latest study. The password types that Ars Technica looked at were comprehensive8, basic8, and basic16. The comprehensive type required a variety of upper-case, lower-case, digits, and symbols with no dictionary words allowed. The only restriction on the two basic types was the number of characters used. Which type do you think was easier for users to adopt and did better in the two password cracking tests? You can learn more about how well users did with the three password types and the results of the tests by visiting the article linked below. What are your thoughts on the matter? Are shorter, more complex passwords better or worse than using short or long, but less complex passwords? What methods do you feel work best since most passwords are limited to approximately 16 characters in length? Perhaps you use a service like LastPass or keep a dedicated list/notebook to manage your passwords. Let us know in the comments!

Read the article

Clang warning flags for Objective-C development

- by Macmade

As a C & Objective-C programmer, I'm a bit paranoid with the compiler warning flags. I usually try to find a complete list of warning flags for the compiler I use, and turn most of them on, unless I have a really good reason not to turn it on. I personally think this may actually improve coding skills, as well as potential code portability, prevent some issues, as it forces you to be aware of every little detail, potential implementation and architecture issues, and so on... It's also in my opinion a good every day learning tool, even if you're an experienced programmer. For the subjective part of this question, I'm interested in hearing other developers (mainly C, Objective-C and C++) about this topic. Do you actually care about stuff like pedantic warnings, etc? And if yes or no, why? Now about Objective-C, I recently completely switched to the LLVM toolchain (with Clang), instead of GCC. On my production code, I usually set this warning flags (explicitly, even if some of them may be covered by -Wall): -Wall -Wbad-function-cast -Wcast-align -Wconversion -Wdeclaration-after-statement -Wdeprecated-implementations -Wextra -Wfloat-equal -Wformat=2 -Wformat-nonliteral -Wfour-char-constants -Wimplicit-atomic-properties -Wmissing-braces -Wmissing-declarations -Wmissing-field-initializers -Wmissing-format-attribute -Wmissing-noreturn -Wmissing-prototypes -Wnested-externs -Wnewline-eof -Wold-style-definition -Woverlength-strings -Wparentheses -Wpointer-arith -Wredundant-decls -Wreturn-type -Wsequence-point -Wshadow -Wshorten-64-to-32 -Wsign-compare -Wsign-conversion -Wstrict-prototypes -Wstrict-selector-match -Wswitch -Wswitch-default -Wswitch-enum -Wundeclared-selector -Wuninitialized -Wunknown-pragmas -Wunreachable-code -Wunused-function -Wunused-label -Wunused-parameter -Wunused-value -Wunused-variable -Wwrite-strings I'm interested in hearing what other developers have to say about this. For instance, do you think I missed a particular flag for Clang (Objective-C), and why? Or do you think a particular flag is not useful (or not wanted at all), and why?

Read the article

Creating a dynamic proxy generator with c# – Part 4 – Calling the base method

- by SeanMcAlinden

Creating a dynamic proxy generator with c# – Part 1 – Creating the Assembly builder, Module builder and caching mechanism Creating a dynamic proxy generator with c# – Part 2 – Interceptor Design Creating a dynamic proxy generator with c# – Part 3 – Creating the constructors The plan for calling the base methods from the proxy is to create a private method for each overridden proxy method, this will allow the proxy to use a delegate to simply invoke the private method when required. Quite a few helper classes have been created to make this possible so as usual I would suggest download or viewing the code at http://rapidioc.codeplex.com/. In this post I’m just going to cover the main points for when creating methods. Getting the methods to override The first two notable methods are for getting the methods. private static MethodInfo[] GetMethodsToOverride<TBase>() where TBase : class { return typeof(TBase).GetMethods().Where(x => !methodsToIgnore.Contains(x.Name) && (x.Attributes & MethodAttributes.Final) == 0) .ToArray(); } private static StringCollection GetMethodsToIgnore() { return new StringCollection() { "ToString", "GetHashCode", "Equals", "GetType" }; } The GetMethodsToIgnore method string collection contains an array of methods that I don’t want to override. In the GetMethodsToOverride method, you’ll notice a binary AND which is basically saying not to include any methods marked final i.e. not virtual. Creating the MethodInfo for calling the base method This method should hopefully be fairly easy to follow, it’s only function is to create a MethodInfo which points to the correct base method, and with the correct parameters. private static MethodInfo CreateCallBaseMethodInfo<TBase>(MethodInfo method) where TBase : class { Type[] baseMethodParameterTypes = ParameterHelper.GetParameterTypes(method, method.GetParameters()); return typeof(TBase).GetMethod( method.Name, BindingFlags.Instance | BindingFlags.Public | BindingFlags.NonPublic, null, baseMethodParameterTypes, null ); } /// <summary> /// Get the parameter types. /// </summary> /// <param name="method">The method.</param> /// <param name="parameters">The parameters.</param> public static Type[] GetParameterTypes(MethodInfo method, ParameterInfo[] parameters) { Type[] parameterTypesList = Type.EmptyTypes; if (parameters.Length > 0) { parameterTypesList = CreateParametersList(parameters); } return parameterTypesList; } Creating the new private methods for calling the base method The following method outline how I’ve created the private methods for calling the base class method. private static MethodBuilder CreateCallBaseMethodBuilder(TypeBuilder typeBuilder, MethodInfo method) { string callBaseSuffix = "GetBaseMethod"; if (method.IsGenericMethod || method.IsGenericMethodDefinition) { return MethodHelper.SetUpGenericMethod ( typeBuilder, method, method.Name + callBaseSuffix, MethodAttributes.Private | MethodAttributes.HideBySig ); } else { return MethodHelper.SetupNonGenericMethod ( typeBuilder, method, method.Name + callBaseSuffix, MethodAttributes.Private | MethodAttributes.HideBySig ); } } The CreateCallBaseMethodBuilder is the entry point method for creating the call base method. I’ve added a suffix to the base classes method name to keep it unique. Non Generic Methods Creating a non generic method is fairly simple public static MethodBuilder SetupNonGenericMethod( TypeBuilder typeBuilder, MethodInfo method, string methodName, MethodAttributes methodAttributes) { ParameterInfo[] parameters = method.GetParameters(); Type[] parameterTypes = ParameterHelper.GetParameterTypes(method, parameters); Type returnType = method.ReturnType; MethodBuilder methodBuilder = CreateMethodBuilder ( typeBuilder, method, methodName, methodAttributes, parameterTypes, returnType ); ParameterHelper.SetUpParameters(parameterTypes, parameters, methodBuilder); return methodBuilder; } private static MethodBuilder CreateMethodBuilder ( TypeBuilder typeBuilder, MethodInfo method, string methodName, MethodAttributes methodAttributes, Type[] parameterTypes, Type returnType ) { MethodBuilder methodBuilder = typeBuilder.DefineMethod(methodName, methodAttributes, returnType, parameterTypes); return methodBuilder; } As you can see, you simply have to declare a method builder, get the parameter types, and set the method attributes you want. Generic Methods Creating generic methods takes a little bit more work. /// <summary> /// Sets up generic method. /// </summary> /// <param name="typeBuilder">The type builder.</param> /// <param name="method">The method.</param> /// <param name="methodName">Name of the method.</param> /// <param name="methodAttributes">The method attributes.</param> public static MethodBuilder SetUpGenericMethod ( TypeBuilder typeBuilder, MethodInfo method, string methodName, MethodAttributes methodAttributes ) { ParameterInfo[] parameters = method.GetParameters(); Type[] parameterTypes = ParameterHelper.GetParameterTypes(method, parameters); MethodBuilder methodBuilder = typeBuilder.DefineMethod(methodName, methodAttributes); Type[] genericArguments = method.GetGenericArguments(); GenericTypeParameterBuilder[] genericTypeParameters = GetGenericTypeParameters(methodBuilder, genericArguments); ParameterHelper.SetUpParameterConstraints(parameterTypes, genericTypeParameters); SetUpReturnType(method, methodBuilder, genericTypeParameters); if (method.IsGenericMethod) { methodBuilder.MakeGenericMethod(genericArguments); } ParameterHelper.SetUpParameters(parameterTypes, parameters, methodBuilder); return methodBuilder; } private static GenericTypeParameterBuilder[] GetGenericTypeParameters ( MethodBuilder methodBuilder, Type[] genericArguments ) { return methodBuilder.DefineGenericParameters(GenericsHelper.GetArgumentNames(genericArguments)); } private static void SetUpReturnType(MethodInfo method, MethodBuilder methodBuilder, GenericTypeParameterBuilder[] genericTypeParameters) { if (method.IsGenericMethodDefinition) { SetUpGenericDefinitionReturnType(method, methodBuilder, genericTypeParameters); } else { methodBuilder.SetReturnType(method.ReturnType); } } private static void SetUpGenericDefinitionReturnType(MethodInfo method, MethodBuilder methodBuilder, GenericTypeParameterBuilder[] genericTypeParameters) { if (method.ReturnType == null) { methodBuilder.SetReturnType(typeof(void)); } else if (method.ReturnType.IsGenericType) { methodBuilder.SetReturnType(genericTypeParameters.Where (x => x.Name == method.ReturnType.Name).First()); } else { methodBuilder.SetReturnType(method.ReturnType); } } Ok, there are a few helper methods missing, basically there is way to much code to put in this post, take a look at the code at http://rapidioc.codeplex.com/ to follow it through completely. Basically though, when dealing with generics there is extra work to do in terms of getting the generic argument types setting up any generic parameter constraints setting up the return type setting up the method as a generic All of the information is easy to get via reflection from the MethodInfo. Emitting the new private method Emitting the new private method is relatively simple as it’s only function is calling the base method and returning a result if the return type is not void. ILGenerator il = privateMethodBuilder.GetILGenerator(); EmitCallBaseMethod(method, callBaseMethod, il); private static void EmitCallBaseMethod(MethodInfo method, MethodInfo callBaseMethod, ILGenerator il) { int privateParameterCount = method.GetParameters().Length; il.Emit(OpCodes.Ldarg_0); if (privateParameterCount > 0) { for (int arg = 0; arg < privateParameterCount; arg++) { il.Emit(OpCodes.Ldarg_S, arg + 1); } } il.Emit(OpCodes.Call, callBaseMethod); il.Emit(OpCodes.Ret); } So in the main method building method, an ILGenerator is created from the method builder. The ILGenerator performs the following actions: Load the class (this) onto the stack using the hidden argument Ldarg_0. Create an argument on the stack for each of the method parameters (starting at 1 because 0 is the hidden argument) Call the base method using the Opcodes.Call code and the MethodInfo we created earlier. Call return on the method Conclusion Now we have the private methods prepared for calling the base method, we have reached the last of the relatively easy part of the proxy building. Hopefully, it hasn’t been too hard to follow so far, there is a lot of code so I haven’t been able to post it all so please check it out at http://rapidioc.codeplex.com/. The next section should be up fairly soon, it’s going to cover creating the delegates for calling the private methods created in this post. Kind Regards, Sean.

Read the article

Mapping UrlEncoded POST Values in ASP.NET Web API

- by Rick Strahl

If there's one thing that's a bit unexpected in ASP.NET Web API, it's the limited support for mapping url encoded POST data values to simple parameters of ApiController methods. When I first looked at this I thought I was doing something wrong, because it seems mighty odd that you can bind query string values to parameters by name, but can't bind POST values to parameters in the same way. To demonstrate here's a simple example. If you have a Web API method like this:[HttpGet] public HttpResponseMessage Authenticate(string username, string password) { …} and then hit with a URL like this: http://localhost:88/samples/authenticate?Username=ricks&Password=sekrit it works just fine. The query string values are mapped to the username and password parameters of our API method. But if you now change the method to work with [HttpPost] instead like this:[HttpPost] public HttpResponseMessage Authenticate(string username, string password) { …} and hit it with a POST HTTP Request like this: POST http://localhost:88/samples/authenticate HTTP/1.1 Host: localhost:88 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Content-type: application/x-www-form-urlencoded Content-Length: 30 Username=ricks&Password=sekrit you'll find that while the request works, it doesn't actually receive the two string parameters. The username and password parameters are null and so the method is definitely going to fail. When I mentioned this over Twitter a few days ago I got a lot of responses back of why I'd want to do this in the first place - after all HTML Form submissions are the domain of MVC and not WebAPI which is a valid point. However, the more common use case is using POST Variables with AJAX calls. The following is quite common for passing simple values:$.post(url,{ Username: "Rick", Password: "sekrit" },function(result) {…}); but alas that doesn't work. How ASP.NET Web API handles Content Bodies Web API supports parsing content data in a variety of ways, but it does not deal with multiple posted content values. In effect you can only post a single content value to a Web API Action method. That one parameter can be very complex and you can bind it in a variety of ways, but ultimately you're tied to a single POST content value in your parameter definition. While it's possible to support multiple parameters on a POST/PUT operation, only one parameter can be mapped to the actual content - the rest have to be mapped to route values or the query string. Web API treats the whole request body as one big chunk of data that is sent to a Media Type Formatter that's responsible for de-serializing the content into whatever value the method requires. The restriction comes from async nature of Web API where the request data is read only once inside of the formatter that retrieves and deserializes it. Because it's read once, checking for content (like individual POST variables) first is not possible. However, Web API does provide a couple of ways to access the form POST data: Model Binding - object property mapping to bind POST values FormDataCollection - collection of POST keys/values ModelBinding POST Values - Binding POST data to Object Properties The recommended way to handle POST values in Web API is to use Model Binding, which maps individual urlencoded POST values to properties of a model object provided as the parameter. Model binding requires a single object as input to be bound to the POST data, with each POST key that matches a property name (including nested properties like Address.Street) being mapped and updated including automatic type conversion of simple types. This is a very nice feature - and a familiar one from MVC - that makes it very easy to have model objects mapped directly from inbound data. The obvious drawback with Model Binding is that you need a model for it to work: You have to provide a strongly typed object that can receive the data and this object has to map the inbound data. To rewrite the example above to use ModelBinding I have to create a class maps the properties that I need as parameters:public class LoginData { public string Username { get; set; } public string Password { get; set; } } and then accept the data like this in the API method:[HttpPost] public HttpResponseMessage Authenticate(LoginData login) { string username = login.Username; string password = login.Password; … } This works fine mapping the POST values to the properties of the login object. As a side benefit of this method definition, the method now also allows posting of JSON or XML to the same endpoint. If I change my request to send JSON like this: POST http://localhost:88/samples/authenticate HTTP/1.1 Host: localhost:88 Accept: application/jsonContent-type: application/json Content-Length: 40 {"Username":"ricks","Password":"sekrit"} it works as well and transparently, courtesy of the nice Content Negotiation features of Web API. There's nothing wrong with using Model binding and in fact it's a common practice to use (view) model object for inputs coming back from the client and mapping them into these models. But it can be kind of a hassle if you have AJAX applications with a ton of backend hits, especially if many methods are very atomic and focused and don't effectively require a model or view. Not always do you have to pass structured data, but sometimes there are just a couple of simple response values that need to be sent back. If all you need is to pass a couple operational parameters, creating a view model object just for parameter purposes seems like overkill. Maybe you can use the query string instead (if that makes sense), but if you can't then you can often end up with a plethora of 'message objects' that serve no further purpose than to make Model Binding work. Note that you can accept multiple parameters with ModelBinding so the following would still work:[HttpPost] public HttpResponseMessage Authenticate(LoginData login, string loginDomain) but only the object will be bound to POST data. As long as loginDomain comes from the querystring or route data this will work. Collecting POST values with FormDataCollection Another more dynamic approach to handle POST values is to collect POST data into a FormDataCollection. FormDataCollection is a very basic key/value collection (like FormCollection in MVC and Request.Form in ASP.NET in general) and then read the values out individually by querying each. [HttpPost] public HttpResponseMessage Authenticate(FormDataCollection form) { var username = form.Get("Username"); var password = form.Get("Password"); …} The downside to this approach is that it's not strongly typed, you have to handle type conversions on non-string parameters, and it gets a bit more complicated to test such as setup as you have to seed a FormDataCollection with data. On the other hand it's flexible and easy to use and especially with string parameters is easy to deal with. It's also dynamic, so if the client sends you a variety of combinations of values on which you make operating decisions, this is much easier to work with than a strongly typed object that would have to account for all possible values up front. The downside is that the code looks old school and isn't as self-documenting as a parameter list or object parameter would be. Nevertheless it's totally functionality and a viable choice for collecting POST values. What about [FromBody]? Web API also has a [FromBody] attribute that can be assigned to parameters. If you have multiple parameters on a Web API method signature you can use [FromBody] to specify which one will be parsed from the POST content. Unfortunately it's not terribly useful as it only returns content in raw format and requires a totally non-standard format ("=content") to specify your content. For more info in how FromBody works and several related issues to how POST data is mapped, you can check out Mike Stalls post: How WebAPI does Parameter Binding Not really sure where the Web API team thought [FromBody] would really be a good fit other than a down and dirty way to send a full string buffer. Extending Web API to make multiple POST Vars work? Don't think so Clearly there's no native support for multiple POST variables being mapped to parameters, which is a bit of a bummer. I know in my own work on one project my customer actually found this to be a real sticking point in their AJAX backend work, and we ended up not using Web API and using MVC JSON features instead. That's kind of sad because Web API is supposed to be the proper solution for AJAX backends. With all of ASP.NET Web API's extensibility you'd think there would be some way to build this functionality on our own, but after spending a bit of time digging and asking some of the experts from the team and Web API community I didn't hear anything that even suggests that this is possible. From what I could find I'd say it's not possible primarily because Web API's Routing engine does not account for the POST variable mapping. This means [HttpPost] methods with url encoded POST buffers are not mapped to the parameters of the endpoint, and so the routes would never even trigger a request that could be intercepted. Once the routing doesn't work there's not much that can be done. If somebody has an idea how this could be accomplished I would love to hear about it. Do we really need multi-value POST mapping? I think that that POST value mapping is a feature that one would expect of any API tool to have. If you look at common APIs out there like Flicker and Google Maps etc. they all work with POST data. POST data is very prominent much more so than JSON inputs and so supporting as many options that enable would seem to be crucial. All that aside, Web API does provide very nice features with Model Binding that allows you to capture many POST variables easily enough, and logistically this will let you build whatever you need with POST data of all shapes as long as you map objects. But having to have an object for every operation that receives a data input is going to take its toll in heavy AJAX applications, with a lot of types created that do nothing more than act as parameter containers. I also think that POST variable mapping is an expected behavior and Web APIs non-support will likely result in many, many questions like this one: How do I bind a simple POST value in ASP.NET WebAPI RC? with no clear answer to this question. I hope for V.next of WebAPI Microsoft will consider this a feature that's worth adding. Related Articles Passing multiple POST parameters to Web API Controller Methods Mike Stall's post: How Web API does Parameter Binding Where does ASP.NET Web API Fit?© Rick Strahl, West Wind Technologies, 2005-2012Posted in Web Api Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

Which cloud hosting should I use? [closed]

- by Alyssa Marie Isk

Possible Duplicate: How to find web hosting that meets my requirements? If anyone wants to get some real life karma by giving a tiny non-profit pointers, please advise! I posted a thread about our website with highly variable traffic (www.WorldOceansDay.org). The event is on June 8th, and the traffic goes from 100-400/day in the off-season, to about 200,000 trying to access the site at any one time on June 8th. It's a Wordpress site hosted on GoDaddy shared hosting and predictably crashed horribly. From the internet's feedback, we've decided to move to a cloud server to handle the traffic, but I'm a huge newbie and I don't have very reliable mentorship, so I'm turning to crowdsourcing. We're trying to decide between Amazon Web Services and RackSpace Cloud servers. Our sys admin consultant also suggested GoDaddy's new 4GH but I have had such incredibly bad experiences with GoDaddy thus far that I am hesitant. From what I've read on the internet, RackSpace might be cheaper? Would AWS totally break the bank? We don't have a ton of money to spend on hosting. We'll also be using CloudFlare to cache and serve the pages since they're dynamic. I've found a few AWS & RackSpace calculators but I am not 100% on how to find those numbers... GoDaddy? Google Analytics? AWS calc is here: http://calculator.s3.amazonaws.com/calc5.html Rackspace is on the right: http://www.rackspace.com/cloud/cloud_hosting_products/servers/pricing/?0a313380 If anyone can help, or through some miracle feels like walking me through this, I would be incredibly appreciative.

Read the article

Turn Photos and Home Videos into Movies with Windows Live Movie Maker

- by DigitalGeekery

Are you looking for an easy way to take your digital photos and videos and turn them into a movie or slideshow? Today we’ll take a detailed look at how to do use Windows Live Movie Maker. Installation Windows Live Movie Maker comes bundled as part of the Windows Live Essentials suite (link below). However, you don’t have to install any of the programs you may not want. Take notice of the You’re almost done screen. Before clicking Continue, be sure to uncheck the boxes to set your search provider and homepage. Adding Pictures and Videos Open Windows Live Movie Maker. You can add videos or photos by simply dragging and dropping them onto the storyboard area. You can also click on the storyboard area or on the Add videos and photos button on the Home tab to browse for videos and photos. Windows Live Movie Maker supports most video, image, and audio file types. Select your files and add click Open to add them to Windows Live Movie Maker. By default WLMM doesn’t allow you to add files from network locations…so check out our article on how to add network support to Windows Live MovieMaker if the files you want to add are on a network drive. Layout All of your added clips will appear in the storyboard area on the right, while the currently selected clip will appear in the preview window on the left. You can adjust the size of the two areas by clicking and dragging the dividing line in the middle. Make the clips on the storyboard bigger or smaller by clicking on the thumbnail size icon. The slider at the lower right adjusts the zoom time scale. Previewing your Movie At any time, you can playback your movie and preview how it will look in the Preview window by clicking the space bar, or by pushing the play button under the preview window. You can also manually move the preview bar slider across the storyboard to view the clips as the video progresses. Adjusting Clips on the Storyboard You can click and drag clips on the storyboard to change the order in which the photos and videos appear. Adding Music Nothing brings a movie to life quite like music. Selecting Add music will add your music to the beginning of the movie. Select Add music at the current point to include it in the movie to the current location of your preview bar slider, then browse for your music clip. WLMM supports many common audio files such as WAV, MP3, M4A, WMA, AIFF, and ASF. The music clip will appear above the video / photos clips on the storyboard. You can change the location of music clips by clicking and dragging them to a different location on the storyboard. Add Titles, Captions, and Credits To add a Title screen to your movie, click the Title button on the Home tab. Type your title directly into the text box on the preview screen. The title will be placed at the location of the preview slider on the storyboard. However, you can change the location by clicking and dragging title to other areas of the storyboard. On the Format tab, there are a handful of text settings. You can change the font, color, size, alignment, and transparency. The Adjust group allows you to change the background color, edit the text, and set the length of time the Title will appear in the movie. The Effects group on the Format tab allows you to select an effect for your title screen. By hovering your cursor over each option, you will get a live preview of how each effect will appear in the preview window. Click to apply any of the effects. For captions, select where you want your caption to appear with the preview slider on the storyboard, then click the captions button on the Home tab. Just like the title, you type your caption directly into the text box on the preview screen, and you can make any adjustments by using the Font and Paragraph, Adjust, and Effects groups above. Credits are done the same as titles and captions, except they are automatically placed at the end of the movie. Transitions Go to the Animation tab on the ribbon to apply transitions. Select a clip from the storyboard and hover over one of the transition to see it in the preview window. Click on the transition to apply it to the clip. You can apply transitions separately to clips or hold down Ctrl button while clicking to select multiple clips to which to apply the same transition. Pan and zoom effects are also located on the Animations tab, but can be applied to photos only. Like transition, you can apply them individually to a clip or hold down Ctrl button while clicking to select multiple clips to which to apply the same pan and zoom effect. Once applied, you can adjust the duration of the transitions and pan and zoom effects. You can also click the dropdown for additional transitions or effects. Visual Effects Similar to Pan and Zoom and Transitions, you can apply a variety of Visual Effects to individual or multiple clips. Editing Video and Music Note: This does not actually edit the original video you imported into your Windows Live Movie Maker project, only how it appears in your WLMM project. There are some very basic editing tools located on the Home tab. The Rotate left and Rotate right button will adjust any clip that may be oriented incorrectly. The Fit to music button will automatically adjust the duration of the photos (if you have any in your project) to fit the length of the music in your movie. Audio mix allows you to change the volume level You can also do some slightly more advanced editing from the Edit tab. Select the video clip on the storyboard and click the Trim tool to edit or remove portions of a video clip. Next, click and drag the sliders in the preview windows to select the are you wish to keep. For example, the area outside the sliders is the area trimmed from the movie. The area inside is the section that is kept in the movie. You can also adjust the Start and End points manually on the ribbon. When you are finished, click Save trim. You can also split your video clips. Move the preview slider to the location in the video clip where you’d like to split it, and select Split. Your video will be split into separate sections. Now you can apply different effects or move them to different locations on the storyboard. Editing Music Clips Select the music clip on the storyboard and then the Options tab on the ribbon. You can adjust the music volume by moving the slider right and left. You can also choose to have your music clip fade in or out at the beginning and end of your movie. From the Fade in and Fade out dropdowns, select None, Slow, Medium, or Fast. To adjust the sound of your audio clips, click on the Edit tab, select the Video volume button, and adjust the slider. Move it all the way to the left to mute any background noise in your video clips. AutoMovie As you have seen, Windows Live Movie Maker allows you to add effects, transitions, titles, and more. If you don’t want to do any of that stuff yourself, AutoMovie will automatically add title, credits, cross fade transitions between items, pan and zoom effects to photos, and fit your project to the music. Just select the AutoMovie button on the Home tab. You can go from zero to movie in literally a couple minutes. Uploading to YouTube You can share your video on YouTube directly from Windows Live Movie Maker. Click on the YouTube icon in the Sharing group on the Home tab. You’ll be prompted for your YouTube username and password. Fill in the details about your movie and click Publish. The movie will be converted to WMV before being uploaded to YouTube. As soon as the YouTube conversion is complete, you’re new movie is live and ready to be viewed. Saving your Movie as a Video File Select the icon at the top left, then select Save movie. As you hover your mouse over each of the options, you will see the output display size, aspect ratio, and estimated file size per minute of video. All of these settings will output your movie as a WMV file. (Unfortunately, the only option is to save a movie as a WMV file.) The only difference is how they are encoded based on preset common settings. The Burn to DVD option also outputs a WMV file, but then opens Windows DVD Maker and walks you through the process of creating and burning a DVD. If you choose the Burn to DVD option, close this window when the WMV file conversion is complete and the Windows DVD Maker will prompt you to begin. When your movie is finished, it’s time to relax and enjoy. Conclusion Windows Live Movie Maker makes it easy for the average person to quickly churn out nice looking movies and slideshows from there own pictures and videos. However, long time users of previous editions (formerly called Windows Movie Maker) will likely be disappointed by some features missing in Windows Live Movie Maker that existed in earlier editions. Looking for details on burning your new project to DVD, check out our article on how to create and author DVDs with Windows DVD Maker. Download Windows Live Movie Maker Similar Articles Productive Geek Tips Family Fun: Share Photos with Photo Gallery and Windows Live SpacesCreate and Author DVDs in Windows 7Rotate a Video 90 degrees with VLC or Windows Live Movie MakerInstall Windows Live Essentials In Windows 7How to Make/Edit a movie with Windows Movie Maker in Windows Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup Windows Firewall with Advanced Security – How To Guides Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox) Hyperwords addon (Firefox) Backup Outlook 2010

Read the article

ASP.NET GZip Encoding Caveats

- by Rick Strahl

GZip encoding in ASP.NET is pretty easy to accomplish using the built-in GZipStream and DeflateStream classes and applying them to the Response.Filter property. While applying GZip and Deflate behavior is pretty easy there are a few caveats that you have watch out for as I found out today for myself with an application that was throwing up some garbage data. But before looking at caveats let’s review GZip implementation for ASP.NET. ASP.NET GZip/Deflate Basics Response filters basically are applied to the Response.OutputStream and transform it as data is written to it through the ASP.NET Response object. So a Response.Write eventually gets written into the output stream which if a filter is also written through the filter stream’s interface. To perform the actual GZip (and Deflate) encoding typically used by Web pages .NET includes the GZipStream and DeflateStream stream classes which can be readily assigned to the Repsonse.OutputStream. With these two stream classes in place it’s almost trivially easy to create a couple of reusable methods that allow you to compress your HTTP output. In my standard WebUtils utility class (from the West Wind West Wind Web Toolkit) created two static utility methods – IsGZipSupported and GZipEncodePage – that check whether the client supports GZip encoding and then actually encodes the current output (note that although the method includes ‘Page’ in its name this code will work with any ASP.NET output). /// <summary> /// Determines if GZip is supported /// </summary> /// <returns></returns> public static bool IsGZipSupported() { string AcceptEncoding = HttpContext.Current.Request.Headers["Accept-Encoding"]; if (!string.IsNullOrEmpty(AcceptEncoding) && (AcceptEncoding.Contains("gzip") || AcceptEncoding.Contains("deflate"))) return true; return false; } /// <summary> /// Sets up the current page or handler to use GZip through a Response.Filter /// IMPORTANT: /// You have to call this method before any output is generated! /// </summary> public static void GZipEncodePage() { HttpResponse Response = HttpContext.Current.Response; if (IsGZipSupported()) { string AcceptEncoding = HttpContext.Current.Request.Headers["Accept-Encoding"]; if (AcceptEncoding.Contains("deflate")) { Response.Filter = new System.IO.Compression.DeflateStream(Response.Filter, System.IO.Compression.CompressionMode.Compress); Response.Headers.Remove("Content-Encoding"); Response.AppendHeader("Content-Encoding", "deflate"); } else { Response.Filter = new System.IO.Compression.GZipStream(Response.Filter, System.IO.Compression.CompressionMode.Compress); Response.Headers.Remove("Content-Encoding"); Response.AppendHeader("Content-Encoding", "gzip"); } } } As you can see the actual assignment of the Filter is as simple as: Response.Filter = new DeflateStream(Response.Filter, System.IO.Compression.CompressionMode.Compress); which applies the filter to the OutputStream. You also need to ensure that your response reflects the new GZip or Deflate encoding and ensure that any pages that are cached in Proxy servers can differentiate between pages that were encoded with the various different encodings (or no encoding). To use this utility function now is trivially easy: In any ASP.NET code that wants to compress its Response output you simply use: protected void Page_Load(object sender, EventArgs e) { WebUtils.GZipEncodePage(); Entry = WebLogFactory.GetEntry(); var entries = Entry.GetLastEntries(App.Configuration.ShowEntryCount, "pk,Title,SafeTitle,Body,Entered,Feedback,Location,ShowTopAd", "TEntries"); if (entries == null) throw new ApplicationException("Couldn't load WebLog Entries: " + Entry.ErrorMessage); this.repEntries.DataSource = entries; this.repEntries.DataBind(); } Here I use an ASP.NET page, but the above WebUtils.GZipEncode() method call will work in any ASP.NET application type including HTTP Handlers. The only requirement is that the filter needs to be applied before any other output is sent to the OutputStream. For example, in my CallbackHandler service implementation by default output over a certain size is GZip encoded. The output that is generated is JSON or XML and if the output is over 5k in size I apply WebUtils.GZipEncode(): if (sbOutput.Length > GZIP_ENCODE_TRESHOLD) WebUtils.GZipEncodePage(); Response.ContentType = ControlResources.STR_JsonContentType; HttpContext.Current.Response.Write(sbOutput.ToString()); Ok, so you probably get the idea: Encoding GZip/Deflate content is pretty easy. Hold on there Hoss –Watch your Caching Or is it? There are a few caveats that you need to watch out for when dealing with GZip content. The fist issue is that you need to deal with the fact that some clients don’t support GZip or Deflate content. Most modern browsers support it, but if you have a programmatic Http client accessing your content GZip/Deflate support is by no means guaranteed. For example, WinInet Http clients don’t support GZip out of the box – it has to be explicitly implemented. Other low level HTTP clients on other platforms too don’t support GZip out of the box. The problem is that your application, your Web Server and Proxy Servers on the Internet might be caching your generated content. If you return content with GZip once and then again without, either caching is not applied or worse the wrong type of content is returned back to the client from a cache or proxy. The result is an unreadable response for *some clients* which is also very hard to debug and fix once in production. You already saw the issue of Proxy servers addressed in the GZipEncodePage() function: // Allow proxy servers to cache encoded and unencoded versions separately Response.AppendHeader("Vary", "Content-Encoding"); This ensures that any Proxy servers also check for the Content-Encoding HTTP Header to cache their content – not just the URL. The same thing applies if you do OutputCaching in your own ASP.NET code. If you generate output for GZip on an OutputCached page the GZipped content will be cached (either by ASP.NET’s cache or in some cases by the IIS Kernel Cache). But what if the next client doesn’t support GZip? She’ll get served a cached GZip page that won’t decode and she’ll get a page full of garbage. Wholly undesirable. To fix this you need to add some custom OutputCache rules by way of the GetVaryByCustom() HttpApplication method in your global_ASAX file: public override string GetVaryByCustomString(HttpContext context, string custom) { // Override Caching for compression if (custom == "GZIP") { string acceptEncoding = HttpContext.Current.Response.Headers["Content-Encoding"]; if (string.IsNullOrEmpty(acceptEncoding)) return ""; else if (acceptEncoding.Contains("gzip")) return "GZIP"; else if (acceptEncoding.Contains("deflate")) return "DEFLATE"; return ""; } return base.GetVaryByCustomString(context, custom); } In a page that use Output caching you then specify: <%@ OutputCache Duration="180" VaryByParam="none" VaryByCustom="GZIP" %> To use that custom rule. It’s all Fun and Games until ASP.NET throws an Error Ok, so you’re up and running with GZip, you have your caching squared away and your pages that you are applying it to are jamming along. Then BOOM, something strange happens and you get a lovely garbled page that look like this: Lovely isn’t it? What’s happened here is that I have WebUtils.GZipEncode() applied to my page, but there’s an error in the page. The error falls back to the ASP.NET error handler and the error handler removes all existing output (good) and removes all the custom HTTP headers I’ve set manually (usually good, but very bad here). Since I applied the Response.Filter (via GZipEncode) the output is now GZip encoded, but ASP.NET has removed my Content-Encoding header, so the browser receives the GZip encoded content without a notification that it is encoded as GZip. The result is binary output. Here’s what Fiddler says about the raw HTTP header output when an error occurs when GZip encoding was applied: HTTP/1.1 500 Internal Server Error Cache-Control: private Content-Type: text/html; charset=utf-8 Date: Sat, 30 Apr 2011 22:21:08 GMT Content-Length: 2138 Connection: close ?`I?%&/m?{J?J??t??` … binary output striped here Notice: no Content-Encoding header and that’s why we’re seeing this garbage. ASP.NET has stripped the Content-Encoding header but left our filter intact. So how do we fix this? In my applications I typically have a global Application_Error handler set up and in this case I’ve been using that. One thing that you can do in the Application_Error handler is explicitly clear out the Response.Filter and set it to null at the top: protected void Application_Error(object sender, EventArgs e) { // Remove any special filtering especially GZip filtering Response.Filter = null; … } And voila I get my Yellow Screen of Death or my custom generated error output back via uncompressed content. BTW, the same is true for Page level errors handled in Page_Error or ASP.NET MVC Error handling methods in a controller. Another and possibly even better solution is to check whether a filter is attached just before the headers are sent to the client as pointed out by Adam Schroeder in the comments: protected void Application_PreSendRequestHeaders() { // ensure that if GZip/Deflate Encoding is applied that headers are set // also works when error occurs if filters are still active HttpResponse response = HttpContext.Current.Response; if (response.Filter is GZipStream && response.Headers["Content-encoding"] != "gzip") response.AppendHeader("Content-encoding", "gzip"); else if (response.Filter is DeflateStream && response.Headers["Content-encoding"] != "deflate") response.AppendHeader("Content-encoding", "deflate"); } This uses the Application_PreSendRequestHeaders() pipeline event to check for compression encoding in a filter and adjusts the content accordingly. This is actually a better solution since this is generic – it’ll work regardless of how the content is cleaned up. For example, an error Response.Redirect() or short error display might get changed and the filter not cleared and this code actually handles that. Sweet, thanks Adam. It’s unfortunate that ASP.NET doesn’t natively clear out Response.Filters when an error occurs just as it clears the Response and Headers. I can’t see where leaving a Filter in place in an error situation would make any sense, but hey - this is what it is and it’s easy enough to fix as long as you know where to look. Riiiight! IIS and GZip I should also mention that IIS 7 includes good support for compression natively. If you can defer encoding to let IIS perform it for you rather than doing it in your code by all means you should do it! Especially any static or semi-dynamic content that can be made static should be using IIS built-in compression. Dynamic caching is also supported but is a bit more tricky to judge in terms of performance and footprint. John Forsyth has a great article on the benefits and drawbacks of IIS 7 compression which gives some detailed performance comparisons and impact reviews. I’ll post another entry next with some more info on IIS compression since information on it seems to be a bit hard to come by. Related Content Built-in GZip/Deflate Compression in IIS 7.x HttpWebRequest and GZip Responses © Rick Strahl, West Wind Technologies, 2005-2011Posted in ASP.NET IIS7

Read the article

Mapping a Vertex Buffer in DirectX11

- by judeclarke

I have a VertexBuffer that I am remapping on a per frame base for a bunch of quads that are constantly updated, sharing the same material\index buffer but have different width/heights. However, currently right now there is a really bad flicker on this geometry. Although it is flickering, the flicker looks correct. I know it is the vertex buffer mapping because if I recreate the entire VB then it will render fine. However, as an optimization I figured I would just remap it. Does anyone know what the problem is? The length (width, size) of the vertex buffer is always the same. One might think it is double buffering, however, it would not be double buffering because it only happens when I map/unmap the buffer, so that leads me to believe that I am setting some parameters wrong on the creation or mapping. I am using DirectX11, my initialization and remap code are: Initialization code D3D11_BUFFER_DESC bd; ZeroMemory( &bd, sizeof(bd) ); bd.Usage = D3D11_USAGE_DYNAMIC; bd.ByteWidth = vertCount * vertexTypeWidth; bd.BindFlags = D3D11_BIND_VERTEX_BUFFER; //bd.CPUAccessFlags = 0; bd.CPUAccessFlags = D3D11_CPU_ACCESS_WRITE; D3D11_SUBRESOURCE_DATA InitData; ZeroMemory( &InitData, sizeof(InitData) ); InitData.pSysMem = vertices; mVertexType = vertexType; HRESULT hResult = device->CreateBuffer( &bd, &InitData, &m_pVertexBuffer ); // This will be S_OK if(hResult != S_OK) return false; Remap code D3D11_MAPPED_SUBRESOURCE resource; HRESULT hResult = deviceContext->Map(m_pVertexBuffer, 0, D3D11_MAP_WRITE_DISCARD, 0, &resource); // This will be S_OK if(hResult != S_OK) return false; resource.pData = vertices; deviceContext->Unmap(m_pVertexBuffer, 0);

Read the article

Java Logger API

- by Koppar

This is a more like a tip rather than technical write up and serves as a quick intro for newbies. The logger API helps to diagnose application level or JDK level issues at runtime. There are 7 levels which decide the detailing in logging (SEVERE, WARNING, INFO, CONFIG, FINE, FINER, FINEST). Its best to start with highest level and as we narrow down, use more detailed logging for a specific area. SEVERE is the highest and FINEST is the lowest. This may not make sense until we understand some jargon. The Logger class provides the ability to stream messages to an output stream in a format that can be controlled by the user. What this translates to is, I can create a logger with this simple invocation and use it add debug messages in my class: import java.util.logging.*; private static final Logger focusLog = Logger.getLogger("java.awt.focus.KeyboardFocusManager"); if (focusLog.isLoggable(Level.FINEST)) { focusLog.log(Level.FINEST, "Calling peer setCurrentFocusOwner}); LogManager acts like a book keeper and all the getLogger calls are forwarded to LogManager. The LogManager itself is a singleton class object which gets statically initialized on JVM start up. More on this later. If there is no existing logger with the given name, a new one is created. If there is one (and not yet GC’ed), then the existing Logger object is returned. By default, a root logger is created on JVM start up. All anonymous loggers are made as the children of the root logger. Named loggers have the hierarchy as per their name resolutions. Eg: java.awt.focus is the parent logger for java.awt.focus.KeyboardFocusManager etc. Before logging any message, the logger checks for the log level specified. If null is specified, the log level of the parent logger will be set. However, if the log level is off, no log messages would be written, irrespective of the parent’s log level. All the messages that are posted to the Logger are handled as a LogRecord object.i.e. FocusLog.log would create a new LogRecord object with the log level and message as its data members). The level of logging and thread number are also tracked. LogRecord is passed on to all the registered Handlers. Handler is basically a means to output the messages. The output may be redirected to either a log file or console or a network logging service. The Handler classes use the LogManager properties to set filters and formatters. During initialization or JVM start up, LogManager looks for logging.properties file in jre/lib and sets the properties if the file is provided. An alternate location for properties file can also be specified by setting java.util.logging.config.file system property. This can be set in Java Control Panel ? Java ? Runtime parameters as -Djava.util.logging.config.file = <mylogfile> or passed as a command line parameter java -Djava.util.logging.config.file = C:/Sunita/myLog The redirection of logging depends on what is specified rather registered as a handler with JVM in the properties file. java.util.logging.ConsoleHandler sends the output to system.err and java.util.logging.FileHandler sends the output to file. File name of the log file can also be specified. If you prefer XML format output, in the configuration file, set java.util.logging.FileHandler.formatter = java.util.logging.XMLFormatter and if you prefer simple text, set set java.util.logging.FileHandler.formatter =java.util.logging.SimpleFormatter Below is the default logging Configuration file: ############################################################ # Default Logging Configuration File # You can use a different file by specifying a filename # with the java.util.logging.config.file system property. # For example java -Djava.util.logging.config.file=myfile ############################################################ ############################################################ # Global properties ############################################################ # "handlers" specifies a comma separated list of log Handler # classes. These handlers will be installed during VM startup. # Note that these classes must be on the system classpath. # By default we only configure a ConsoleHandler, which will only # show messages at the INFO and above levels. handlers= java.util.logging.ConsoleHandler # To also add the FileHandler, use the following line instead. #handlers= java.util.logging.FileHandler, java.util.logging.ConsoleHandler # Default global logging level. # This specifies which kinds of events are logged across # all loggers. For any given facility this global level # can be overriden by a facility specific level # Note that the ConsoleHandler also has a separate level # setting to limit messages printed to the console. .level= INFO ############################################################ # Handler specific properties. # Describes specific configuration info for Handlers. ############################################################ # default file output is in user's home directory. java.util.logging.FileHandler.pattern = %h/java%u.log java.util.logging.FileHandler.limit = 50000 java.util.logging.FileHandler.count = 1 java.util.logging.FileHandler.formatter = java.util.logging.XMLFormatter # Limit the message that are printed on the console to INFO and above. java.util.logging.ConsoleHandler.level = INFO java.util.logging.ConsoleHandler.formatter = java.util.logging.SimpleFormatter ############################################################ # Facility specific properties. # Provides extra control for each logger. ############################################################ # For example, set the com.xyz.foo logger to only log SEVERE # messages: com.xyz.foo.level = SEVERE Since I primarily use this method to track focus issues, here is how I get detailed awt focus related logging. Just set the logger name to java.awt.focus.level=FINEST and change the default log level to FINEST. Below is a basic sample program. The sample programs are from http://www2.cs.uic.edu/~sloan/CLASSES/java/ and have been modified to illustrate the logging API. By changing the .level property in the logging.properties file, one can control the output written to the logs. To play around with the example, try changing the levels in the logging.properties file and notice the difference in messages going to the log file. Example --------KeyboardReader.java------------------------------------------------------------------------------------- import java.io.*; import java.util.*; import java.util.logging.*; public class KeyboardReader { private static final Logger mylog = Logger.getLogger("samples.input"); public static void main (String[] args) throws java.io.IOException { String s1; String s2; double num1, num2, product; // set up the buffered reader to read from the keyboard BufferedReader br = new BufferedReader (new InputStreamReader (System.in)); System.out.println ("Enter a line of input"); s1 = br.readLine(); if (mylog.isLoggable(Level.SEVERE)) { mylog.log (Level.SEVERE,"The line entered is " + s1); } if (mylog.isLoggable(Level.INFO)) { mylog.log (Level.INFO,"The line has " + s1.length() + " characters"); } if (mylog.isLoggable(Level.FINE)) { mylog.log (Level.FINE,"Breaking the line into tokens we get:"); } int numTokens = 0; StringTokenizer st = new StringTokenizer (s1); while (st.hasMoreTokens()) { s2 = st.nextToken(); numTokens++; if (mylog.isLoggable(Level.FINEST)) { mylog.log (Level.FINEST, " Token " + numTokens + " is: " + s2); } } } } ----------MyFileReader.java---------------------------------------------------------------------------------------- import java.io.*; import java.util.*; import java.util.logging.*; public class MyFileReader extends KeyboardReader { private static final Logger mylog = Logger.getLogger("samples.input.file"); public static void main (String[] args) throws java.io.IOException { String s1; String s2; // set up the buffered reader to read from the keyboard BufferedReader br = new BufferedReader (new FileReader ("MyFileReader.txt")); s1 = br.readLine(); if (mylog.isLoggable(Level.SEVERE)) { mylog.log (Level.SEVERE,"ATTN The line is " + s1); } if (mylog.isLoggable(Level.INFO)) { mylog.log (Level.INFO, "The line has " + s1.length() + " characters"); } if (mylog.isLoggable(Level.FINE)) { mylog.log (Level.FINE,"Breaking the line into tokens we get:"); } int numTokens = 0; StringTokenizer st = new StringTokenizer (s1); while (st.hasMoreTokens()) { s2 = st.nextToken(); numTokens++; if (mylog.isLoggable(Level.FINEST)) { mylog.log (Level.FINEST,"Breaking the line into tokens we get:"); mylog.log (Level.FINEST," Token " + numTokens + " is: " + s2); } } //end of while } // end of main } // end of class ----------MyFileReader.txt------------------------------------------------------------------------------------------ My first logging example -------logging.properties------------------------------------------------------------------------------------------- handlers= java.util.logging.ConsoleHandler, java.util.logging.FileHandler .level= FINEST java.util.logging.FileHandler.pattern = java%u.log java.util.logging.FileHandler.limit = 50000 java.util.logging.FileHandler.count = 1 java.util.logging.FileHandler.formatter = java.util.logging.SimpleFormatter java.util.logging.ConsoleHandler.level = FINEST java.util.logging.ConsoleHandler.formatter = java.util.logging.SimpleFormatter java.awt.focus.level=ALL ------Output log------------------------------------------------------------------------------------------- May 21, 2012 11:44:55 AM MyFileReader main SEVERE: ATTN The line is My first logging example May 21, 2012 11:44:55 AM MyFileReader main INFO: The line has 24 characters May 21, 2012 11:44:55 AM MyFileReader main FINE: Breaking the line into tokens we get: May 21, 2012 11:44:55 AM MyFileReader main FINEST: Breaking the line into tokens we get: May 21, 2012 11:44:55 AM MyFileReader main FINEST: Token 1 is: My May 21, 2012 11:44:55 AM MyFileReader main FINEST: Breaking the line into tokens we get: May 21, 2012 11:44:55 AM MyFileReader main FINEST: Token 2 is: first May 21, 2012 11:44:55 AM MyFileReader main FINEST: Breaking the line into tokens we get: May 21, 2012 11:44:55 AM MyFileReader main FINEST: Token 3 is: logging May 21, 2012 11:44:55 AM MyFileReader main FINEST: Breaking the line into tokens we get: May 21, 2012 11:44:55 AM MyFileReader main FINEST: Token 4 is: example Invocation command: "C:\Program Files (x86)\Java\jdk1.6.0_29\bin\java.exe" -Djava.util.logging.config.file=logging.properties MyFileReader References Further technical details are available here: http://docs.oracle.com/javase/1.4.2/docs/guide/util/logging/overview.html#1.0 http://docs.oracle.com/javase/1.4.2/docs/api/java/util/logging/package-summary.html http://www2.cs.uic.edu/~sloan/CLASSES/java/

Read the article

Error when compiling FXAA shader

- by mulletdevil

I am getting the following error when compiling the FXAA shader downloaded from here http://timothylottes.blogspot.co.uk/2011/07/fxaa-311-released.html Fxaa3_11.h(934,5): error x4000: Use of potentially uninitialized variable (FxaaPixelShader) Here is the line in the shader if(earlyExit) #if (FXAA_DISCARD == 1) FxaaDiscard; #else return rgbyM; #endif Does anyone know what may be causing this? I have not changed any values in that shader. Here is a snippet from my current pixel shader #define FXAA_GREEN_AS_LUMA 1 #define FXAA_HLSL_4 1 #define FXAA_PC 1 #define FXAA_QUALITY__PRESET 12 #include "Fxaa3_11.h" PS_OUTPUT main(PS_INPUT fragment) { PS_OUTPUT output; const float2 pos = fragment.hPosition.xy; const float4 notUsedFloat4 = float4(0.0f, 0.0f, 0.0f, 0.0f); const float fxaaQualitySubpix = 0; const float fxaaQualityEdgeThreshold = 0.333; const float fxaaQualityEdgeThresholdMin = 0.0833; const float notUsedFloat = 0.0f; FxaaTex fxaaTex; fxaaTex.smpl = SampleType; fxaaTex.tex = inputTexture; output.colour = FxaaPixelShader(pos, //1 notUsedFloat4, //2 fxaaTex, //3 fxaaTex, //4 fxaaTex, //5 rcpFrame, //6 notUsedFloat4, //7 rcpFrameOpt, //8 notUsedFloat4, //9 fxaaQualitySubpix, //10 fxaaQualityEdgeThreshold, //11 fxaaQualityEdgeThresholdMin, //12 notUsedFloat, //13 notUsedFloat, //14 notUsedFloat, //15 notUsedFloat //16 ); return output; } Am I passing a wrong value into the shader?

Read the article

Box Selection and Multi-Line Editing with VS 2010

- by ScottGu

This is the twenty-second in a series of blog posts I’m doing on the VS 2010 and .NET 4 release. I’ve already covered some of the code editor improvements in the VS 2010 release. In particular, I’ve blogged about the Code Intellisense Improvements, new Code Searching and Navigating Features, HTML, ASP.NET and JavaScript Snippet Support, and improved JavaScript Intellisense. Today’s blog post covers a small, but nice, editor improvement with VS 2010 – the ability to use “Box Selection” when performing multi-line editing. This can eliminate keystrokes and enables some slick editing scenarios. [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] Box Selection Box selection is a feature that has been in Visual Studio for awhile (although not many people knew about it). It allows you to select a rectangular region of text within the code editor by holding down the Alt key while selecting the text region with the mouse. With VS 2008 you could then copy or delete the selected text. VS 2010 now enables several more capabilities with box selection including: Text Insertion: Typing with box selection now allows you to insert new text into every selected line Paste/Replace: You can now paste the contents of one box selection into another and have the content flow correctly Zero-Length Boxes: You can now make a vertical selection zero characters wide to create a multi-line insert point for new or copied text These capabilities can be very useful in a variety of scenarios. Some example scenarios: change access modifiers (private->public), adding comments to multiple lines, setting fields, or grouping multiple statements together. Great 3 Minute Box-Selection Video Demo Brittany Behrens from the Visual Studio Editor Team has an excellent 3 minute video that shows off a few cool VS 2010 multi-line code editing scenarios with box selection: Watch it to learn a few ways you can use this new box selection capability to optimize your typing in VS 2010 even further: Hope this helps, Scott P.S. You can learn more about the VS Editor by following the Visual Studio Team Blog or by following @VSEditor on Twitter.

Read the article

Internationalize WebCenter Portal - Content Presenter

- by Stefan Krantz

Lately we have been involved in engagements where internationalization has been holding the project back from success. In this post we are going to explain how to get Content Presenter and its editorials to comply with the current selected locale for the WebCenter Portal session. As you probably know by now WebCenter Portal leverages the Localization support from Java Server Faces (JSF), in this post we will assume that the localization is controlled and enforced by switching the current browsers locale between English and Spanish. There is two main scenarios in internationalization of a content enabled pages, since Content Presenter offers both presentation of information as well as contribution of information, in this post we will look at how to enable seamless integration of correct localized version of the back end content file and how to enable the editor/author to edit the correct localized version of the file based on the current browser locale. Solution Scenario 1 - Localization aware content presentation Due to the amount of steps required to implement the enclosed solution proposal I have decided to share the solution with you in group components for each facet of the solution. If you want to get more details on each step, you can review the enclosed components. This post will guide you through the steps of enabling each component and what it enables/changes in each section of the system. Enable Content Presenter Customization By leveraging a predictable naming convention of the data files used to hold the content for the Content Presenter instance we can easily develop a component that will dynamically switch the name out before presenting the information. The naming convention we have leverage is the industry best practice by having a shared identifier as prefix (ContentABC) and a language enabled suffix (_EN) (_ES). So the assumption is that each file pair in above example should look like following:- English version - (ContentABC_EN)- Spanish version - (ContentABC_ES) Based on above theory we can now easily regardless of the primary version assigned to the content presenter instance switch the language out by using the localization support from JSF. Below java bean (oracle.webcenter.doclib.internal.view.presenter.NLSHelperBean) is enclosed in the customization project available for download at the bottom of the post: 1: public static final String CP_D_DOCNAME_FORMAT = "%s_%s"; 2: public static final int CP_UNIQUE_ID_INDEX = 0; 3: private ContentPresenter presenter = null; 4: 5: 6: public NLSHelperBean() { 7: super(); 8: } 9: 10: /** 11: * This method updates the configuration for the pageFlowScope to have the correct datafile 12: * for the current Locale 13: */ 14: public void initLocaleForDataFile() { 15: String dataFile = null; 16: // Checking that state of presenter is present, also make sure the item is eligible for localization by locating the "_" in the name 17: if(presenter.getConfiguration().getDatasource() != null && 18: presenter.getConfiguration().getDatasource().isNodeDatasource() && 19: presenter.getConfiguration().getDatasource().getNodeIdDatasource() != null && 20: !presenter.getConfiguration().getDatasource().getNodeIdDatasource().equals("") && 21: presenter.getConfiguration().getDatasource().getNodeIdDatasource().indexOf("_") > 0) { 22: dataFile = presenter.getConfiguration().getDatasource().getNodeIdDatasource(); 23: FacesContext fc = FacesContext.getCurrentInstance(); 24: //Leveraging the current faces contenxt to get current localization language 25: String currentLocale = fc.getViewRoot().getLocale().getLanguage().toUpperCase(); 26: String newDataFile = dataFile; 27: String [] uniqueIdArr = dataFile.split("_"); 28: if(uniqueIdArr.length > 0) { 29: newDataFile = String.format(CP_D_DOCNAME_FORMAT, uniqueIdArr[CP_UNIQUE_ID_INDEX], currentLocale); 30: } 31: //Replacing the current Node datasource with localized datafile. 32: presenter.getConfiguration().getDatasource().setNodeIdDatasource(newDataFile); 33: } 34: } With this bean code available to our WebCenter Portal implementation we can start the next step, by overriding the standard behavior in content presenter by applying a MDS Taskflow customization to the content presenter taskflow, following taskflow customization has been applied to the customization project attached to this post:- Library: WebCenter Document Library Service View- Path: oracle.webcenter.doclib.view.jsf.taskflows.presenter- File: contentPresenter.xml Changes made in above customization view:1. A new method invocation activity has been added (initLocaleForDataFile)2. The method invocation invokes the new NLSHelperBean3. The default activity is moved to the new Method invocation (initLocaleForDataFile)4. The outcome from the method invocation goes to determine-navigation (original default activity) The above changes concludes the presentation modification to support a compatible localization scenario for a content driven page. In addition this customization do not limit or disables the out of the box capabilities of WebCenter Portal. Steps to enable above customization Start JDeveloper and open your WebCenter Portal Application Select "Open Project" and include the extracted project you downloaded (CPNLSCustomizations.zip) Make sure the build out put from CPNLSCustomizations project is a dependency to your Portal project Deploy your Portal Application to your WC_CustomPortal managed server Make sure your naming convention of the two data files follow above recommendation Example result of the solution: Solution Scenario 2 - Localization aware content creation and authoring As you could see from Solution Scenario 1 we require the naming convention to be strictly followed, this means in the hands of a user with limited technology knowledge this can be one of the failing links in this solutions. Therefore I strongly recommend that you also follow this part since this will eliminate this risk and also increase the editors/authors usability with a magnitude. The current WebCenter Portal Architecture leverages WebCenter Content today to maintain, publish and manage content, therefore we need to make few efforts in making sure this part of the architecture is on board with our new naming practice and also simplifies the creation of content for our end users. As you probably remember the naming convention required a prefix to be common so I propose we enable a new component that help you auto name the content items dDocName (this means that the readable title can still be in a human readable format). The new component (WCP-LocalizationSupport.zip) built for this scenario will enable a couple of things: 1. A new service where a sequential number can be generate on request - service name: GET_WCP_LOCALE_CONTENTID 2. The content presenter is leveraging a specific function when launching the content creation wizard from within Content Presenter. Assumption is that users will create the content by clicking "Create Web Content" button. When clicking the button the wizard opened is actually running in side of WebCenter Content server, file executed (contentwizard.hcsp). This file uses JSON commands that will generate operations in the content server, I have extend this file to create two identical data files instead of one.- First it creates the English version by leveraging the new Service and a Global Rule to set the dDocName on the original check in screen, this global rule is available in a configuration package attached to this blog (NLSContentProfileRule.zip)- Secondly we run a set of JSON javascripts to create the Spanish version with the same details except for the name where we replace the suffix with (_ES)- Then content creation wizard ends with its out of the box behavior and assigns the Content Presenter instance the English versionSee Javascript markup below - this can be changed in the (WCP-LocalizationSupport.zip/component/WCP-LocalizationSupport/publish/webcenter) 1: //---------------------------------------A-TEAM--------------------------------------- 2: WCM.ContentWizard.CheckinContentPage.OnCheckinComplete = function(returnParams) 3: { 4: var callback = WCM.ContentWizard.CheckinContentPage.checkinCompleteCallback; 5: WCM.ContentWizard.ChooseContentPage.OnSelectionComplete(returnParams, callback); 6: // Load latest DOC_INFO_SIMPLE 7: var cgiPath = DOCLIB.config.httpCgiPath; 8: var jsonBinder = new WCM.Idc.JSONBinder(); 9: jsonBinder.SetLocalDataValue('IdcService', 'DOC_INFO_SIMPLE'); 10: jsonBinder.SetLocalDataValue('dID', returnParams.dID); 11: jsonBinder.Send(cgiPath, $CB(this, function(http) { 12: var ret = http.GetResponseText(); 13: var binder = new WCM.Idc.JSONBinder(ret); 14: var dDocName = binder.GetResultSetValue('DOC_INFO', 'dDocName', 0); 15: if(dDocName.indexOf("_") > 0){ 16: var ssBinder = new WCM.Idc.JSONBinder(); 17: ssBinder.SetLocalDataValue('IdcService', 'SS_CHECKIN_NEW'); 18: //Additional Localization dDocName generated 19: ssBinder.SetLocalDataValue('dDocName', getLocalizedDocName(dDocName, "es")); 20: ssBinder.SetLocalDataValue('primaryFile', 'default.xml'); 21: ssBinder.SetLocalDataValue('ssDefaultDocumentToken', 'SSContributorDataFile'); 22: 23: for(var n = 0 ; n < binder.GetResultSetFields('DOC_INFO').length ; n++) { 24: var field = binder.GetResultSetFields('DOC_INFO')[n]; 25: if(field != 'dID' && 26: field != 'dDocName' && 27: field != 'dID' && 28: field != 'dReleaseState' && 29: field != 'dRevClassID' && 30: field != 'dRevisionID' && 31: field != 'dRevLabel') { 32: ssBinder.SetLocalDataValue(field, binder.GetResultSetValue('DOC_INFO', field, 0)); 33: } 34: } 35: ssBinder.Send(cgiPath, $CB(this, function(http) {})); 36: } 37: })); 38: } 39: 40: //Support function to create localized dDocNames 41: function getLocalizedDocName(dDocName, lang) { 42: var result = dDocName.replace("_EN", ("_" + lang)); 43: return result; 44: } 45: //---------------------------------------A-TEAM--------------------------------------- 3. By applying the enclosed NLSContentProfileRule.zip, the check in screen for DataFile creation will have auto naming enabled with localization suffix (default is English)You can change the default language by updating the GlobalNlsRule and assign preferred prefix.See Rule markup for dDocName field below: <$executeService("GET_WCP_LOCALE_CONTENTID")$><$dprDefaultValue=WCP_LOCALE.LocaleContentId & "_EN"$> Steps to enable above extensions and configurations Install WebCenter Component (WCP-LocalizationSupport.zip), via the AdminServer in WebCenter Content Administration menus Enable the component and restart the content server Apply the configuration bundle to enable the new Global Rule (GlobalNlsRule), via the WebCenter Content Administration/Config Migration Admin New Content Creation Experience Result Content EditingContent editing will by default be enabled for authoring in the current select locale since the content file is selected by (Solution Scenario 1), this means that a user can switch his browser locale and then get the editing experience adaptable to the current selected locale. NotesA-Team are planning to post a solution on how to inline switch the locale of the WebCenter Portal Session, so the Content Presenter, Navigation Model and other Face related features are localized accordingly. Content Presenter examples used in this post is an extension to following post:https://blogs.oracle.com/ATEAM_WEBCENTER/entry/enable_content_editing_of_iterative Downloads CPNLSCustomizations.zip - WebCenter Portal, Content Presenter Customization https://blogs.oracle.com/ATEAM_WEBCENTER/resource/stefan.krantz/CPNLSCustomizations.zip WCP-LocalizationSupport.zip - WebCenter Content, Extension Component to enable localization creation of files with compliant auto naminghttps://blogs.oracle.com/ATEAM_WEBCENTER/resource/stefan.krantz/WCP-LocalizationSupport.zip NLSContentProfileRule.zip - WebCenter Content, Configuration Update Bundle to enable Global rule for new check in naming of data fileshttps://blogs.oracle.com/ATEAM_WEBCENTER/resource/stefan.krantz/NLSContentProfileRule.zip

Read the article

FileNameColumnName property, Flat File Source Adapter : SSIS Nugget

- by jamiet

I saw a question on MSDN’s SSIS forum the other day that went something like this: I’m loading data into a table from a flat file but I want to be able to store the name of that file as well. Is there a way of doing that? I don’t want to come across as disrespecting those who took the time to reply but there was a few answers along the lines of “loop over the files using a For Each, store the file name in a variable yadda yadda yadda” when in fact there is a much much simpler way of accomplishing this; it just happens to be a little hidden away as I shall now explain! The Flat File Source Adapter has a property called FileNameColumnName which for some reason it isn’t exposed through the Flat File Source editor, it is however exposed via the Advanced Properties: You’ll see in the screenshot above that I have set FileNameColumnName=“Filename” (it doesn’t matter what name you use, anything except a non-zero string will work). What this will do is create a new column in our dataflow called “Filename” that contains, unsurprisingly, the name of the file from which the row was sourced. All very simple. This is particularly useful if you are extracting data from multiple files using the MultiFlatFile Connection Manager as it allows you to differentiate between data from each of the files as you can see in the following screenshot: So there you have it, the FileNameColumnName property; a little known secret of SSIS. I hope it proves to be useful to someone out there. @Jamiet Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

Read the article

How to implement RLE into a tilemap?

- by Smallbro

Currently I've been using a 3D array for my tiles in a 2D world but the 3D side comes in when moving down into caves and whatnot. Now this is not memory efficient and I switched over to a 2D array and can now have much larger maps. The only issue I'm having now is that it seems that my tiles cannot occupy the same space as a tile on the same z level. My current structure means that each block has its own z variable. This is what it used to look like: map.blockData[x][y][z] = new Block(); however now it works like this map.blockData[x][y] = new Block(z); I'm not sure why but if I decide to use the same space on say the floor below it wont allow me to. Does anyone have any ideas on how I can add a z-axis to my 2D array? I'm using java but I reckon the concept carries across different languages. Edit: As Will posted, RLE sounds like the best method for achieving a fast 3D array. However I'm struggling to understand how I would even start to implement it? Would I create a 4D array the 4th being something which controls how many to skip? Or would the x-axis simply change altogether and have large gaps in between - for example [5][y][z] would skip 5 tiles? Is there something really obvious here which I am missing? The number of z levels I'm trying to have is around 66, it would be preferably that I can have up to or more than 1000 in x and y.

Read the article

Uploading documents to WSS (Windows Sharepoint Services) using SSIS

- by Randy Aldrich Paulo

Recently I was tasked to create an SSIS application that will query a database, split the results with certain criteria and create CSV file for every result and upload the file to a Sharepoint Document Library site. I've search the web and compiled the steps I've taken to build the solution. Summary: A) Create a proxy class of WSS Copy.asmx. B) Create a wrapper class for the proxy class and add a mechanism to check if the file is existing and delete method. C) Create an SSIS and call the wrapper class to transfer the files. A) Creating Proxy Class 1) Go to Visual Studio Command Prompt type wsdl http://[sharepoint site]/_vti_bin/Copy.asmx this will generate the proxy class (Copy.cs) that will be added to the solution. 2) Add Copy.cs to solution and create another constructor for Copy() that will accept additional parameters url, userName, password and domain. public Copy(string url, string userName, string password, string domain) { this.Url = url; this.Credentials = new System.Net.NetworkCredential(userName, password, domain); } 3) Add a namespace. B) Wrapper Class Create a C# new library that references the Proxy Class. C) Create SSIS SSIS solution is composed of: 1) Execute SQL Task, returns a single column rows containing the criteria. 2) Foreach Loop Container - loops per result from query (SQL Task) and creates a CSV file on a certain folder. 3) Script Task - calls the wrapper class to upload CSV files located on a certain folder to targer WSS Document Library Note: I've created another overload of CopyFiles that accepts a Directory Info instead of file location that loops thru the contents of the folder. Designer View Variable View

Read the article

Java installation problem

- by Zxy

I cannot install java on my ubuntu 12.04: zero@ghostrider:~$ sudo apt-get purge openjdk* [sudo] password for zero: Reading package lists... Done Building dependency tree Reading state information... Done Note, selecting 'openjdk-6-demo' for regex 'openjdk*' Note, selecting 'openjdk-7-jre-headless' for regex 'openjdk*' Note, selecting 'uwsgi-plugin-jwsgi-openjdk-6' for regex 'openjdk*' Note, selecting 'openjdk-jre' for regex 'openjdk*' Note, selecting 'openjdk-7-source' for regex 'openjdk*' Note, selecting 'openjdk-6-dbg' for regex 'openjdk*' Note, selecting 'openjdk7-jdk' for regex 'openjdk*' Note, selecting 'openjdk-6-doc' for regex 'openjdk*' Note, selecting 'openjdk-7-jre-zero' for regex 'openjdk*' Note, selecting 'openjdk-7-demo' for regex 'openjdk*' Note, selecting 'openjdk-6-jre-headless' for regex 'openjdk*' Note, selecting 'openjdk-6-jdk' for regex 'openjdk*' Note, selecting 'openjdk-6-jre' for regex 'openjdk*' Note, selecting 'openjdk-6-jre-lib' for regex 'openjdk*' Note, selecting 'openjdk-6-jre-zero' for regex 'openjdk*' Note, selecting 'openjdk-7-dbg' for regex 'openjdk*' Note, selecting 'openjdk-7-doc' for regex 'openjdk*' Note, selecting 'openjdk-7-jdk' for regex 'openjdk*' Note, selecting 'openjdk-7-jre' for regex 'openjdk*' Note, selecting 'openjdk-6-source' for regex 'openjdk*' Note, selecting 'openjdk-7-jre-lib' for regex 'openjdk*' Note, selecting 'uwsgi-plugin-jvm-openjdk-6' for regex 'openjdk*' Package uwsgi-plugin-jvm-openjdk-6 is not installed, so not removed Package uwsgi-plugin-jwsgi-openjdk-6 is not installed, so not removed Package openjdk-6-dbg is not installed, so not removed Package openjdk-6-demo is not installed, so not removed Package openjdk-6-doc is not installed, so not removed Package openjdk-6-jdk is not installed, so not removed Package openjdk-6-jre is not installed, so not removed Package openjdk-6-jre-headless is not installed, so not removed Package openjdk-6-jre-lib is not installed, so not removed Package openjdk-6-source is not installed, so not removed Package openjdk-6-jre-zero is not installed, so not removed Package openjdk-7-dbg is not installed, so not removed Package openjdk-7-demo is not installed, so not removed Package openjdk-7-doc is not installed, so not removed Package openjdk-7-jdk is not installed, so not removed Package openjdk-7-jre is not installed, so not removed Package openjdk-7-jre-headless is not installed, so not removed Package openjdk-7-jre-lib is not installed, so not removed Package openjdk-7-jre-zero is not installed, so not removed Package openjdk-7-source is not installed, so not removed 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Setting up oracle-java7-installer (7u3-0~eugenesan~precise4) ... Downloading... --2012-06-11 23:56:42-- http://download.oracle.com/otn-pub/java/jdk/7u3-b04/jdk- 7u3-linux-i586.tar.gz Resolving download.oracle.com (download.oracle.com)... 64.209.77.18 Connecting to download.oracle.com (download.oracle.com)|64.209.77.18|:80... connected. HTTP request sent, awaiting response... 302 Moved Temporarily Location: https://edelivery.oracle.com/otn-pub/java/jdk/7u3-b04/jdk-7u3-linux-i586.tar.gz [following] --2012-06-11 23:56:42-- https://edelivery.oracle.com/otn-pub/java/jdk/7u3-b04/jdk-7u3-linux-i586.tar.gz Resolving edelivery.oracle.com (edelivery.oracle.com)... 95.101.122.174 Connecting to edelivery.oracle.com (edelivery.oracle.com)|95.101.122.174|:443... connected. HTTP request sent, awaiting response... 302 Moved Temporarily Location: http://download.oracle.com/errors/download-fail-1505220.html [following] --2012-06-11 23:56:44-- http://download.oracle.com/errors/download-fail-1505220.html Connecting to download.oracle.com (download.oracle.com)|64.209.77.18|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 5307 (5.2K) [text/html] Saving to: `./jdk-7u3-linux-i586.tar.gz' 0K ..... 100% 1007K=0.005s 2012-06-11 23:56:44 (1007 KB/s) - `./jdk-7u3-linux-i586.tar.gz' saved [5307/5307] Download done. sha256sum mismatch jdk-7u3-linux-i586.tar.gz Oracle JDK 7 is NOT installed. dpkg: error processing oracle-java7-installer (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already Errors were encountered while processing: oracle-java7-installer E: Sub-process /usr/bin/dpkg returned an error code (1) zero@ghostrider:~$ sudo add-apt-repository ppa:eugenesan/java You are about to add the following PPA to your system: More info: https://launchpad.net/~eugenesan/+archive/java Press [ENTER] to continue or ctrl-c to cancel adding it Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret- keyring /tmp/tmp.uGcZHfsoNF --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --keyserver hkp://keyserver.ubuntu.com:80/ --recv 4346FBB158F4022C896164EEE61380B28313A596 gpg: requesting key 8313A596 from hkp server keyserver.ubuntu.com gpg: key 8313A596: "Launchpad synergy+" not changed gpg: Total number processed: 1 gpg: unchanged: 1 zero@ghostrider:~$ sudo apt-get update Ign http://tr.archive.ubuntu.com precise InRelease Ign http://tr.archive.ubuntu.com precise-updates InRelease Ign http://tr.archive.ubuntu.com precise-backports InRelease Hit http://tr.archive.ubuntu.com precise Release.gpg Hit http://tr.archive.ubuntu.com precise-updates Release.gpg Hit http://tr.archive.ubuntu.com precise-backports Release.gpg Hit http://tr.archive.ubuntu.com precise Release Ign http://extras.ubuntu.com precise InRelease Ign http://security.ubuntu.com precise-security InRelease Hit http://tr.archive.ubuntu.com precise-updates Release Ign http://ppa.launchpad.net precise InRelease Hit http://tr.archive.ubuntu.com precise-backports Release Hit http://tr.archive.ubuntu.com precise/main Sources Hit http://tr.archive.ubuntu.com precise/restricted Sources Hit http://tr.archive.ubuntu.com precise/universe Sources Hit http://tr.archive.ubuntu.com precise/multiverse Sources Hit http://tr.archive.ubuntu.com precise/main i386 Packages Hit http://tr.archive.ubuntu.com precise/restricted i386 Packages Hit http://tr.archive.ubuntu.com precise/universe i386 Packages Hit http://extras.ubuntu.com precise Release.gpg Hit http://ppa.launchpad.net precise Release.gpg Hit http://security.ubuntu.com precise-security Release.gpg Hit http://tr.archive.ubuntu.com precise/multiverse i386 Packages Hit http://tr.archive.ubuntu.com precise/main TranslationIndex Hit http://tr.archive.ubuntu.com precise/multiverse TranslationIndex Hit http://tr.archive.ubuntu.com precise/restricted TranslationIndex Hit http://tr.archive.ubuntu.com precise/universe TranslationIndex Hit http://tr.archive.ubuntu.com precise-updates/main Sources Hit http://tr.archive.ubuntu.com precise-updates/restricted Sources Hit http://tr.archive.ubuntu.com precise-updates/universe Sources Hit http://tr.archive.ubuntu.com precise-updates/multiverse Sources Hit http://tr.archive.ubuntu.com precise-updates/main i386 Packages Hit http://extras.ubuntu.com precise Release Hit http://ppa.launchpad.net precise Release Hit http://security.ubuntu.com precise-security Release Hit http://tr.archive.ubuntu.com precise-updates/restricted i386 Packages Hit http://tr.archive.ubuntu.com precise-updates/universe i386 Packages Hit http://tr.archive.ubuntu.com precise-updates/multiverse i386 Packages Hit http://tr.archive.ubuntu.com precise-updates/main TranslationIndex Hit http://tr.archive.ubuntu.com precise-updates/multiverse TranslationIndex Hit http://tr.archive.ubuntu.com precise-updates/restricted TranslationIndex Hit http://tr.archive.ubuntu.com precise-updates/universe TranslationIndex Hit http://tr.archive.ubuntu.com precise-backports/main Sources Hit http://tr.archive.ubuntu.com precise-backports/restricted Sources Hit http://tr.archive.ubuntu.com precise-backports/universe Sources Hit http://tr.archive.ubuntu.com precise-backports/multiverse Sources Hit http://tr.archive.ubuntu.com precise-backports/main i386 Packages Hit http://tr.archive.ubuntu.com precise-backports/restricted i386 Packages Hit http://tr.archive.ubuntu.com precise-backports/universe i386 Packages Hit http://tr.archive.ubuntu.com precise-backports/multiverse i386 Packages Hit http://tr.archive.ubuntu.com precise-backports/main TranslationIndex Hit http://extras.ubuntu.com precise/main Sources Hit http://ppa.launchpad.net precise/main Sources Hit http://security.ubuntu.com precise-security/main Sources Hit http://tr.archive.ubuntu.com precise-backports/multiverse TranslationIndex Hit http://tr.archive.ubuntu.com precise-backports/restricted TranslationIndex Hit http://tr.archive.ubuntu.com precise-backports/universe TranslationIndex Hit http://tr.archive.ubuntu.com precise/main Translation-en Hit http://tr.archive.ubuntu.com precise/multiverse Translation-en Hit http://extras.ubuntu.com precise/main i386 Packages Ign http://extras.ubuntu.com precise/main TranslationIndex Hit http://tr.archive.ubuntu.com precise/restricted Translation-en Hit http://tr.archive.ubuntu.com precise/universe Translation-en Hit http://tr.archive.ubuntu.com precise-updates/main Translation-en Hit http://tr.archive.ubuntu.com precise-updates/multiverse Translation-en Hit http://tr.archive.ubuntu.com precise-updates/restricted Translation-en Hit http://ppa.launchpad.net precise/main i386 Packages Ign http://ppa.launchpad.net precise/main TranslationIndex Hit http://security.ubuntu.com precise-security/restricted Sources Hit http://security.ubuntu.com precise-security/universe Sources Hit http://security.ubuntu.com precise-security/multiverse Sources Hit http://security.ubuntu.com precise-security/main i386 Packages Hit http://security.ubuntu.com precise-security/restricted i386 Packages Hit http://tr.archive.ubuntu.com precise-updates/universe Translation-en Hit http://tr.archive.ubuntu.com precise-backports/main Translation-en Hit http://tr.archive.ubuntu.com precise-backports/multiverse Translation-en Hit http://tr.archive.ubuntu.com precise-backports/restricted Translation-en Hit http://tr.archive.ubuntu.com precise-backports/universe Translation-en Hit http://security.ubuntu.com precise-security/universe i386 Packages Hit http://security.ubuntu.com precise-security/multiverse i386 Packages Hit http://security.ubuntu.com precise-security/main TranslationIndex Hit http://security.ubuntu.com precise-security/multiverse TranslationIndex Hit http://security.ubuntu.com precise-security/restricted TranslationIndex Hit http://security.ubuntu.com precise-security/universe TranslationIndex Hit http://security.ubuntu.com precise-security/main Translation-en Hit http://security.ubuntu.com precise-security/multiverse Translation-en Hit http://security.ubuntu.com precise-security/restricted Translation-en Hit http://security.ubuntu.com precise-security/universe Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://extras.ubuntu.com precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://extras.ubuntu.com precise/main Translation-en Reading package lists... Done zero@ghostrider:~$ sudo apt-get install oracle-java7-installer Reading package lists... Done Building dependency tree Reading state information... Done oracle-java7-installer is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? Y Setting up oracle-java7-installer (7u3-0~eugenesan~precise4) ... Downloading... --2012-06-11 23:57:11-- http://download.oracle.com/otn-pub/java/jdk/7u3-b04/jdk- 7u3-linux-i586.tar.gz Resolving download.oracle.com (download.oracle.com)... 64.209.77.18 Connecting to download.oracle.com (download.oracle.com)|64.209.77.18|:80... connected. HTTP request sent, awaiting response... 302 Moved Temporarily Location: https://edelivery.oracle.com/otn-pub/java/jdk/7u3-b04/jdk-7u3-linux-i586.tar.gz [following] --2012-06-11 23:57:11-- https://edelivery.oracle.com/otn-pub/java/jdk/7u3-b04/jdk-7u3-linux-i586.tar.gz Resolving edelivery.oracle.com (edelivery.oracle.com)... 95.101.122.174 Connecting to edelivery.oracle.com (edelivery.oracle.com)|95.101.122.174|:443... connected. HTTP request sent, awaiting response... 302 Moved Temporarily Location: http://download.oracle.com/errors/download-fail-1505220.html [following] --2012-06-11 23:57:12-- http://download.oracle.com/errors/download-fail-1505220.html Connecting to download.oracle.com (download.oracle.com)|64.209.77.18|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 5307 (5.2K) [text/html] Saving to: `./jdk-7u3-linux-i586.tar.gz' 0K ..... 100% 976K=0.005s 2012-06-11 23:57:12 (976 KB/s) - `./jdk-7u3-linux-i586.tar.gz' saved [5307/5307] Download done. sha256sum mismatch jdk-7u3-linux-i586.tar.gz Oracle JDK 7 is NOT installed. dpkg: error processing oracle-java7-installer (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already Errors were encountered while processing: oracle-java7-installer E: Sub-process /usr/bin/dpkg returned an error code (1) zero@ghostrider:~$

Read the article

How to Use USER_DEFINED Activity in OWB Process Flow

- by Jinggen He

Process Flow is a very important component of Oracle Warehouse Builder. With Process Flow, we can create and control the ETL process by setting all kinds of activities in a well-constructed flow. In Oracle Warehouse Builder 11gR2, there are 28 kinds of activities, which fall into three categories: Control activities, OWB specific activities and Utility activities. For more information about Process Flow activities, please refer to OWB online doc. Most of those activities are pre-defined for some specific use. For example, the Mapping activity allows execution an OWB mapping in Process Flow and the FTP activity allows an interaction between the local host and a remote FTP server. Besides those activities for specific purposes, the User Defined activity enables you to incorporate into a Process Flow an activity that is not defined within Warehouse Builder. So the User Defined activity brings flexibility and extensibility to Process Flow. In this article, we will take an amazing tour of using the User Defined activity. Let's start. Enable execution of User Defined activity Let's start this section from creating a very simple Process Flow, which contains a Start activity, a User Defined activity and an End Success activity. Leave all parameters of activity USER_DEFINED unchanged except that we enter /tmp/test.sh into the Value column of the COMMAND parameter. Then let's create the shell script test.sh in /tmp directory. Here is the content of /tmp/test.sh (this article is demonstrating a scenario in Linux system, and /tmp/test.sh is a Bash shell script): echo Hello World! > /tmp/test.txt Note: don't forget to grant the execution privilege on /tmp/test.sh to OS Oracle user. For simplicity, we just use the following command. chmod +x /tmp/test.sh OK, it's so simple that we’ve almost done it. Now deploy the Process Flow and run it. For a newly installed OWB, we will come across an error saying "RPE-02248: For security reasons, activity operator Shell has been disabled by the DBA". See below. That's because, by default, the User Defined activity is DISABLED. Configuration about this can be found in <ORACLE_HOME>/owb/bin/admin/Runtime.properties: property.RuntimePlatform.0.NativeExecution.Shell.security_constraint=DISABLED The property can be set to three different values: NATIVE_JAVA, SCHEDULER and DISBALED. Where NATIVE_JAVA uses the Java 'Runtime.exec' interface, SCHEDULER uses a DBMS Scheduler external job submitted by the Control Center repository owner which is executed by the default operating system user configured by the DBA. DISABLED prevents execution via these operators. We enable the execution of User Defined activity by setting: property.RuntimePlatform.0.NativeExecution.Shell.security_constraint= NATIVE_JAVA Restart the Control Center service for the change of setting to take effect. cd <ORACLE_HOME>/owb/rtp/sql sqlplus OWBSYS/<password of OWBSYS> @stop_service.sql sqlplus OWBSYS/<password of OWBSYS> @start_service.sql And then run the Process Flow again. We will see that the Process Flow completes successfully. The execution of /tmp/test.sh successfully generated a file /tmp/test.txt, containing the line Hello World!. Pass parameters to User Defined Activity The Process Flow created in the above section has a drawback: the User Defined activity doesn't accept any information from OWB nor does it give any meaningful results back to OWB. That's to say, it lacks interaction. Maybe, sometimes such a Process Flow can fulfill the business requirement. But for most of the time, we need to get the User Defined activity executed according to some information prior to that step. In this section, we will see how to pass parameters to the User Defined activity and pass them into the to-be-executed shell script. First, let's see how to pass parameters to the script. The User Defined activity has an input parameter named PARAMETER_LIST. This is a list of parameters that will be passed to the command. Parameters are separated from one another by a token. The token is taken as the first character on the PARAMETER_LIST string, and the string must also end in that token. Warehouse Builder recommends the '?' character, but any character can be used. For example, to pass 'abc,' 'def,' and 'ghi' you can use the following equivalent: ?abc?def?ghi? or !abc!def!ghi! or |abc|def|ghi| If the token character or '\' needs to be included as part of the parameter, then it must be preceded with '\'. For example '\\'. If '\' is the token character, then '/' becomes the escape character. Let's configure the PARAMETER_LIST parameter as below: And modify the shell script /tmp/test.sh as below: echo $1 is saying hello to $2! > /tmp/test.txt Re-deploy the Process Flow and run it. We will see that the generated /tmp/test.txt contains the following line: Bob is saying hello to Alice! In the example above, the parameters passed into the shell script are static. This case is not so useful because: instead of passing parameters, we can directly write the value of the parameters in the shell script. To make the case more meaningful, we can pass two dynamic parameters, that are obtained from the previous activity, to the shell script. Prepare the Process Flow as below: The Mapping activity MAPPING_1 has two output parameters: FROM_USER, TO_USER. The User Defined activity has two input parameters: FROM_USER, TO_USER. All the four parameters are of String type. Additionally, the Process Flow has two string variables: VARIABLE_FOR_FROM_USER, VARIABLE_FOR_TO_USER. Through VARIABLE_FOR_FROM_USER, the input parameter FROM_USER of USER_DEFINED gets value from output parameter FROM_USER of MAPPING_1. We achieve this by binding both parameters to VARIABLE_FOR_FROM_USER. See the two figures below. In the same way, through VARIABLE_FOR_TO_USER, the input parameter TO_USER of USER_DEFINED gets value from output parameter TO_USER of MAPPING_1. Also, we need to change the PARAMETER_LIST of the User Defined activity like below: Now, the shell script is getting input from the Mapping activity dynamically. Deploy the Process Flow and all of its necessary dependees then run the Process Flow. We see that the generated /tmp/test.txt contains the following line: USER B is saying hello to USER A! 'USER B' and 'USER A' are two outputs of the Mapping execution. Write the shell script within Oracle Warehouse Builder In the previous section, the shell script is located in the /tmp directory. But sometimes, when the shell script is small, or for the sake of maintaining consistency, you may want to keep the shell script inside Oracle Warehouse Builder. We can achieve this by configuring these three parameters of a User Defined activity properly: COMMAND: Set the path of interpreter, by which the shell script will be interpreted. PARAMETER_LIST: Set it blank. SCRIPT: Enter the shell script content. Note that in Linux the shell script content is passed into the interpreter as standard input at runtime. About how to actually pass parameters to the shell script, we can utilize variable substitutions. As in the following figure, ${FROM_USER} will be replaced by the value of the FROM_USER input parameter of the User Defined activity. So will the ${TO_USER} symbol. Besides the custom substitution variables, OWB also provide some system pre-defined substitution variables. You can refer to the online document for that. Deploy the Process Flow and run it. We see that the generated /tmp/test.txt contains the following line: USER B is saying hello to USER A! Leverage the return value of User Defined activity All of the previous sections are connecting the User Defined activity to END_SUCCESS with an unconditional transition. But what should we do if we want different subsequent activities for different shell script execution results? 1. The simplest way is to add three simple-conditioned out-going transitions for the User Defined activity just like the figure below. In the figure, to simplify the scenario, we connect the User Defined activity to three End activities. Basically, if the shell script ends successfully, the whole Process Flow will end at END_SUCCESS, otherwise, the whole Process Flow will end at END_ERROR (in our case, ending at END_WARNING seldom happens). In the real world, we can add more complex and meaningful subsequent business logic. 2. Or we can utilize complex conditions to work with different results of the User Defined activity. Previously, in our script, we only have this line: echo ${FROM_USER} is saying hello to ${TO_USER}! > /tmp/test.txt We can add more logic in it and return different values accordingly. echo ${FROM_USER} is saying hello to ${TO_USER}! > /tmp/test.txt if CONDITION_1 ; then ...... exit 0 fi if CONDITION_2 ; then ...... exit 2 fi if CONDITION_3 ; then ...... exit 3 fi After that we can leverage the result by checking RESULT_CODE in condition expression of those out-going transitions. Let's suppose that we have the Process Flow as the following graph (SUB_PROCESS_n stands for more different further processes): We can set complex condition for the transition from USER_DEFINED to SUB_PROCESS_1 like this: Other transitions can be set in the same way. Note that, in our shell script, we return 0, 2 and 3, but not 1. As in Linux system, if the shell script comes across a system error like IO error, the return value will be 1. We can explicitly handle such a return value. Summary Let's summarize what has been discussed in this article: How to create a Process Flow with a User Defined activity in it How to pass parameters from the prior activity to the User Defined activity and finally into the shell script How to write the shell script within Oracle Warehouse Builder How to do variable substitutions How to let the User Defined activity return different values and in what way can we leverage

Read the article

What code smell best describes this code?

- by Paul Stovell

Suppose you have this code in a class: private DataContext _context; public Customer[] GetCustomers() { GetContext(); return _context.Customers.ToArray(); } public Order[] GetOrders() { GetContext(); return _context.Customers.ToArray(); } // For the sake of this example, a new DataContext is *required* // for every public method call private void GetContext() { if (_context != null) { _context.Dispose(); } _context = new DataContext(); } This code isn't thread-safe - if two calls to GetOrders/GetCustomers are made at the same time from different threads, they may end up using the same context, or the context could be disposed while being used. Even if this bug didn't exist, however, it still "smells" like bad code. A much better design would be for GetContext to always return a new instance of DataContext and to get rid of the private field, and to dispose of the instance when done. Changing from an inappropriate private field to a local variable feels like a better solution. I've looked over the code smell lists and can't find one that describes this. In the past I've thought of it as temporal coupling, but the Wikipedia description suggests that's not the term: Temporal coupling When two actions are bundled together into one module just because they happen to occur at the same time. This page discusses temporal coupling, but the example is the public API of a class, while my question is about the internal design. Does this smell have a name? Or is it simply "buggy code"?

Read the article

FileNameColumnName property, Flat File Source Adapter : SSIS Nugget

- by jamiet

I saw a question on MSDN’s SSIS forum the other day that went something like this: I’m loading data into a table from a flat file but I want to be able to store the name of that file as well. Is there a way of doing that? I don’t want to come across as disrespecting those who took the time to reply but there was a few answers along the lines of “loop over the files using a For Each, store the file name in a variable yadda yadda yadda” when in fact there is a much much simpler way of accomplishing this; it just happens to be a little hidden away as I shall now explain! The Flat File Source Adapter has a property called FileNameColumnName which for some reason it isn’t exposed through the Flat File Source editor, it is however exposed via the Advanced Properties: You’ll see in the screenshot above that I have set FileNameColumnName=“Filename” (it doesn’t matter what name you use, anything except a non-zero string will work). What this will do is create a new column in our dataflow called “Filename” that contains, unsurprisingly, the name of the file from which the row was sourced. All very simple. This is particularly useful if you are extracting data from multiple files using the MultiFlatFile Connection Manager as it allows you to differentiate between data from each of the files as you can see in the following screenshot: So there you have it, the FileNameColumnName property; a little known secret of SSIS. I hope it proves to be useful to someone out there. @Jamiet Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

Read the article

Photoshop Retro Vintage Design Tutorials

- by Aditi

Gone are the days when designers only wanted to create high glossy web2.0 gradient rich website designs. Now a days designers are coming up with rugged, retro & vintage themes for their website designs. Colorful or subtle with that worn out look the website seems like a masterpiece. It is not hard to pick up on such Photoshop techniques to master the art of making themes that are retro & vibrant. We have complied a list of tutorials you would like to learn from..rest is in your hands & creativity. Photochrom Vintage Postcard effect Turn your high definition photos into vintage postcards and use them in your website concepts. Learn More Add Retro Look to your Images Give that 1970’s retro look to your images and web concepts. It’s a very easy process using either patterns, brushes, colors or gradients, layer modes and variable opacity. Learn More Brushed metal effect, Just like World War Airplanes texture This is one of a kind photoshop tutorial that teaches how to use noise and blur filters to create a brushed metal effect unlike other gradient based effects, Also it covers a few layer styles to create airplane graphic. Learn More Transform a New Image into Illustration, Retro Poster Style With the help of this tutorial you can create brilliant poster style or illustrative images and concepts for your new website. This tutorial is superb example of image enhancement & creative use of blending options in photoshop. Learn More Retro Neon Style Text Tutorial Just like the old days, the rainbow neon curvy text format that can be seen on many posters etc, can now be made for your use on website. This tutorial gives you a easy step by step procedure. Learn More Retro Dotted Photo Tutorial Find how to make a dotted poster of your image, pure retro feel. Learn More

Read the article

Are you aware of .NET Reflector Pro?

I'm sure many of my readers know Reflector, that tool to decompile the assemblies to see what it contains, maybe investigating what Microsoft has done with the base assemblies in .NET or maybe trying to understand 3rd party assemblies (or maybe just trying to recover the lost source code ;-) ) It's invaluable tool to have in your tool box. One nice scenario where it helps a lot is Sharepoint development in case you are in problems with the API. But are you aware that MS gave the product to Red Gate Software (http://www.red-gate.com) which released a Pro version of Reflector (http://www.red-gate.com/products/reflector/index.htm) a couple of months ago? Have a look at the feature set on top of the free version.Full support for .NET 1.0, 1.1, 2.0, 3.0, 3.5, and 4.0Decompile an entire assembly to either C# or VB to view and debug in Visual Studio Step-through debugging of any assembly in Visual Studio (as long as it's not obfuscated): Step into and set breakpoints anywhere in any assemblyWatch variables in the decompiled codeUse Visual Studio's advanced debugging features in decompiled code: Set Next Statement, modify variable values, and dynamic expression evaluation in the immediate window I strongly encourage you to have a look at .NET Reflector in case you haven't done so already. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

How to work RavenDB Id with ASP.NET MVC Routes

- by shiju

By default RavenDB's Id would be sperated by "/". Let's say that we have a category object, the Ids would be like "categories/1". This will make problems when working with ASP.NET MVC's route rule. For a route category/edit/id, the uri would be category/edit/categories/1. You can solve this problem in two waysSolution 1 - Change Id SeparatorWe can use different Id Separator for RavenDB Ids in order to working with ASP.NET MVC route rules. The following code specify that Ids would be seperated by "-" rather than the default "/" documentStore = new DocumentStore { Url = "http://localhost:8080/" }; documentStore.Initialize(); documentStore.Conventions.IdentityPartsSeparator = "-"; The above IdentityPartsSeparator would be generate Ids like "categories-1"Solution 2 - Modify ASP.NET MVC Route Modify the ASP.NET MVC routes in the Global.asax.cs file, as shown in the following code routes.MapRoute( "WithParam", // Route name "{controller}/{action}/{*id}" // URL with parameters ); We just put "*" in front of the id variable that will be working with the default Id separator of RavenDB

Read the article

Auto-Suggest via ‘Trie’ (Pre-fix Tree)

- by Strenium

Auto-Suggest (Auto-Complete) “thing” has been around for a few years. Here’s my little snippet on the subject. For one of my projects, I had to deal with a non-trivial set of items to be pulled via auto-suggest used by multiple concurrent users. Simple, dumb iteration through a list in local cache or back-end access didn’t quite cut it. Enter a nifty little structure, perfectly suited for storing and matching verbal data: “Trie” (http://tinyurl.com/db56g) also known as a Pre-fix Tree: “Unlike a binary search tree, no node in the tree stores the key associated with that node; instead, its position in the tree defines the key with which it is associated. All the descendants of a node have a common prefix of the string associated with that node, and the root is associated with the empty string. Values are normally not associated with every node, only with leaves and some inner nodes that correspond to keys of interest.” This is a very scalable, performing structure. Though, as usual, something ‘fast’ comes at a cost of ‘size’; fortunately RAM is more plentiful today so I can live with that. I won’t bore you with the detailed algorithmic performance here - Google can do a better job of such. So, here’s C# implementation of all this. Let’s start with individual node: Trie Node /// <summary> /// Contains datum of a single trie node. /// </summary> public class AutoSuggestTrieNode { public char Value { get; set; } /// <summary> /// Gets a value indicating whether this instance is leaf node. /// </summary> /// <value> /// <c>true</c> if this instance is leaf node; otherwise, a prefix node <c>false</c>. /// </value> public bool IsLeafNode { get; private set; } public List<AutoSuggestTrieNode> DescendantNodes { get; private set; } /// <summary> /// Initializes a new instance of the <see cref="AutoSuggestTrieNode"/> class. /// </summary> /// <param name="value">The phonetic value.</param> /// <param name="isLeafNode">if set to <c>true</c> [is leaf node].</param> public AutoSuggestTrieNode(char value = ' ', bool isLeafNode = false) { Value = value; IsLeafNode = isLeafNode; DescendantNodes = new List<AutoSuggestTrieNode>(); } /// <summary> /// Gets the descendants of the pre-fix node, if any. /// </summary> /// <param name="descendantValue">The descendant value.</param> /// <returns></returns> public AutoSuggestTrieNode GetDescendant(char descendantValue) { return DescendantNodes.FirstOrDefault(descendant => descendant.Value == descendantValue); } } Quite self-explanatory, imho. A node is either a “Pre-fix” or a “Leaf” node. “Leaf” contains the full “word”, while the “Pre-fix” nodes act as indices used for matching the results. Ok, now the Trie: Trie Structure /// <summary> /// Contains structure and functionality of an AutoSuggest Trie (Pre-fix Tree) /// </summary> public class AutoSuggestTrie { private readonly AutoSuggestTrieNode _root = new AutoSuggestTrieNode(); /// <summary> /// Adds the word to the trie by breaking it up to pre-fix nodes + leaf node. /// </summary> /// <param name="word">Phonetic value.</param> public void AddWord(string word) { var currentNode = _root; word = word.Trim().ToLower(); for (int i = 0; i < word.Length; i++) { var child = currentNode.GetDescendant(word[i]); if (child == null) /* this character hasn't yet been indexed in the trie */ { var newNode = new AutoSuggestTrieNode(word[i], word.Count() - 1 == i); currentNode.DescendantNodes.Add(newNode); currentNode = newNode; } else currentNode = child; /* this character is already indexed, move down the trie */ } } /// <summary> /// Gets the suggested matches. /// </summary> /// <param name="word">The phonetic search value.</param> /// <returns></returns> public List<string> GetSuggestedMatches(string word) { var currentNode = _root; word = word.Trim().ToLower(); var indexedNodesValues = new StringBuilder(); var resultBag = new ConcurrentBag<string>(); for (int i = 0; i < word.Trim().Length; i++) /* traverse the trie collecting closest indexed parent (parent can't be leaf, obviously) */ { var child = currentNode.GetDescendant(word[i]); if (child == null || word.Count() - 1 == i) break; /* done looking, the rest of the characters aren't indexed in the trie */ indexedNodesValues.Append(word[i]); currentNode = child; } Action<AutoSuggestTrieNode, string> collectAllMatches = null; collectAllMatches = (node, aggregatedValue) => /* traverse the trie collecting matching leafNodes (i.e. "full words") */ { if (node.IsLeafNode) /* full word */ resultBag.Add(aggregatedValue); /* thread-safe write */ Parallel.ForEach(node.DescendantNodes, descendandNode => /* asynchronous recursive traversal */ { collectAllMatches(descendandNode, String.Format("{0}{1}", aggregatedValue, descendandNode.Value)); }); }; collectAllMatches(currentNode, indexedNodesValues.ToString()); return resultBag.OrderBy(o => o).ToList(); } /// <summary> /// Gets the total words (leafs) in the trie. Recursive traversal. /// </summary> public int TotalWords { get { int runningCount = 0; Action<AutoSuggestTrieNode> traverseAllDecendants = null; traverseAllDecendants = n => { runningCount += n.DescendantNodes.Count(o => o.IsLeafNode); n.DescendantNodes.ForEach(traverseAllDecendants); }; traverseAllDecendants(this._root); return runningCount; } } } Matching operations and Inserts involve traversing the nodes before the right “spot” is found. Inserts need be synchronous since ordering of data matters here. However, matching can be done in parallel traversal using recursion (line 64). Here’s sample usage: [TestMethod] public void AutoSuggestTest() { var autoSuggestCache = new AutoSuggestTrie(); var testInput = @"Lorem ipsum dolor sit amet, consectetur adipiscing elit. Integer nec odio. Praesent libero. Sed cursus ante dapibus diam. Sed nisi. Nulla quis sem at nibh elementum imperdiet. Duis sagittis ipsum. Praesent mauris. Fusce nec tellus sed augue semper porta. Mauris massa. Vestibulum lacinia arcu eget nulla. Class aptent taciti sociosqu ad litora torquent per conubia nostra, per inceptos himenaeos. Curabitur sodales ligula in libero. Sed dignissim lacinia nunc. Curabitur tortor. Pellentesque nibh. Aenean quam. In scelerisque sem at dolor. Maecenas mattis. Sed convallis tristique sem. Proin ut ligula vel nunc egestas porttitor. Morbi lectus risus, iaculis vel, suscipit quis, luctus non, massa. Fusce ac turpis quis ligula lacinia aliquet. Mauris ipsum. Nulla metus metus, ullamcorper vel, tincidunt sed, euismod in, nibh. Quisque volutpat condimentum velit. Class aptent taciti sociosqu ad litora torquent per conubia nostra, per inceptos himenaeos. Nam nec ante. Sed lacinia, urna non tincidunt mattis, tortor neque adipiscing diam, a cursus ipsum ante quis turpis. Nulla facilisi. Ut fringilla. Suspendisse potenti. Nunc feugiat mi a tellus consequat imperdiet. Vestibulum sapien. Proin quam. Etiam ultrices. Suspendisse in justo eu magna luctus suscipit. Sed lectus. Integer euismod lacus luctus magna. Quisque cursus, metus vitae pharetra auctor, sem massa mattis sem, at interdum magna augue eget diam. Vestibulum ante ipsum primis in faucibus orci luctus et ultrices posuere cubilia Curae; Morbi lacinia molestie dui. Praesent blandit dolor. Sed non quam. In vel mi sit amet augue congue elementum. Morbi in ipsum sit amet pede facilisis laoreet. Donec lacus nunc, viverra nec."; testInput.Split(' ').ToList().ForEach(word => autoSuggestCache.AddWord(word)); var testMatches = autoSuggestCache.GetSuggestedMatches("le"); } ..and the result: That’s it!

Read the article

ASP.NET MVC Validation Complete

- by Ricardo Peres

OK, so let’s talk about validation. Most people are probably familiar with the out of the box validation attributes that MVC knows about, from the System.ComponentModel.DataAnnotations namespace, such as EnumDataTypeAttribute, RequiredAttribute, StringLengthAttribute, RangeAttribute, RegularExpressionAttribute and CompareAttribute from the System.Web.Mvc namespace. All of these validators inherit from ValidationAttribute and perform server as well as client-side validation. In order to use them, you must include the JavaScript files MicrosoftMvcValidation.js, jquery.validate.js or jquery.validate.unobtrusive.js, depending on whether you want to use Microsoft’s own library or jQuery. No significant difference exists, but jQuery is more extensible. You can also create your own attribute by inheriting from ValidationAttribute, but, if you want to have client-side behavior, you must also implement IClientValidatable (all of the out of the box validation attributes implement it) and supply your own JavaScript validation function that mimics its server-side counterpart. Of course, you must reference the JavaScript file where the declaration function is. Let’s see an example, validating even numbers. First, the validation attribute: 1: [Serializable] 2: [AttributeUsage(AttributeTargets.Property, AllowMultiple = false, Inherited = true)] 3: public class IsEvenAttribute : ValidationAttribute, IClientValidatable 4: { 5: protected override ValidationResult IsValid(Object value, ValidationContext validationContext) 6: { 7: Int32 v = Convert.ToInt32(value); 8: 9: if (v % 2 == 0) 10: { 11: return (ValidationResult.Success); 12: } 13: else 14: { 15: return (new ValidationResult("Value is not even")); 16: } 17: } 18: 19: #region IClientValidatable Members 20: 21: public IEnumerable<ModelClientValidationRule> GetClientValidationRules(ModelMetadata metadata, ControllerContext context) 22: { 23: yield return (new ModelClientValidationRule() { ValidationType = "iseven", ErrorMessage = "Value is not even" }); 24: } 25: 26: #endregion 27: } The iseven validation function is declared like this in JavaScript, using jQuery validation: 1: jQuery.validator.addMethod('iseven', function (value, element, params) 2: { 3: return (true); 4: return ((parseInt(value) % 2) == 0); 5: }); 6: 7: jQuery.validator.unobtrusive.adapters.add('iseven', [], function (options) 8: { 9: options.rules['iseven'] = options.params; 10: options.messages['iseven'] = options.message; 11: }); Do keep in mind that this is a simple example, for example, we are not using parameters, which may be required for some more advanced scenarios. As a side note, if you implement a custom validator that also requires a JavaScript function, you’ll probably want them together. One way to achieve this is by including the JavaScript file as an embedded resource on the same assembly where the custom attribute is declared. You do this by having its Build Action set as Embedded Resource inside Visual Studio: Then you have to declare an attribute at assembly level, perhaps in the AssemblyInfo.cs file: 1: [assembly: WebResource("SomeNamespace.IsEven.js", "text/javascript")] In your views, if you want to include a JavaScript file from an embedded resource you can use this code: 1: public static class UrlExtensions 2: { 3: private static readonly MethodInfo getResourceUrlMethod = typeof(AssemblyResourceLoader).GetMethod("GetWebResourceUrlInternal", BindingFlags.NonPublic | BindingFlags.Static); 4: 5: public static IHtmlString Resource<TType>(this UrlHelper url, String resourceName) 6: { 7: return (Resource(url, typeof(TType).Assembly.FullName, resourceName)); 8: } 9: 10: public static IHtmlString Resource(this UrlHelper url, String assemblyName, String resourceName) 11: { 12: String resourceUrl = getResourceUrlMethod.Invoke(null, new Object[] { Assembly.Load(assemblyName), resourceName, false, false, null }).ToString(); 13: return (new HtmlString(resourceUrl)); 14: } 15: } And on the view: 1: <script src="<%: this.Url.Resource("SomeAssembly", "SomeNamespace.IsEven.js") %>" type="text/javascript"></script> Then there’s the CustomValidationAttribute. It allows externalizing your validation logic to another class, so you have to tell which type and method to use. The method can be static as well as instance, if it is instance, the class cannot be abstract and must have a public parameterless constructor. It can be applied to a property as well as a class. It does not, however, support client-side validation. Let’s see an example declaration: 1: [CustomValidation(typeof(ProductValidator), "OnValidateName")] 2: public String Name 3: { 4: get; 5: set; 6: } The validation method needs this signature: 1: public static ValidationResult OnValidateName(String name) 2: { 3: if ((String.IsNullOrWhiteSpace(name) == false) && (name.Length <= 50)) 4: { 5: return (ValidationResult.Success); 6: } 7: else 8: { 9: return (new ValidationResult(String.Format("The name has an invalid value: {0}", name), new String[] { "Name" })); 10: } 11: } Note that it can be either static or instance and it must return a ValidationResult-derived class. ValidationResult.Success is null, so any non-null value is considered a validation error. The single method argument must match the property type to which the attribute is attached to or the class, in case it is applied to a class: 1: [CustomValidation(typeof(ProductValidator), "OnValidateProduct")] 2: public class Product 3: { 4: } The signature must thus be: 1: public static ValidationResult OnValidateProduct(Product product) 2: { 3: } Continuing with attribute-based validation, another possibility is RemoteAttribute. This allows specifying a controller and an action method just for performing the validation of a property or set of properties. This works in a client-side AJAX way and it can be very useful. Let’s see an example, starting with the attribute declaration and proceeding to the action method implementation: 1: [Remote("Validate", "Validation")] 2: public String Username 3: { 4: get; 5: set; 6: } The controller action method must contain an argument that can be bound to the property: 1: public ActionResult Validate(String username) 2: { 3: return (this.Json(true, JsonRequestBehavior.AllowGet)); 4: } If in your result JSON object you include a string instead of the true value, it will consider it as an error, and the validation will fail. This string will be displayed as the error message, if you have included it in your view. You can also use the remote validation approach for validating your entire entity, by including all of its properties as included fields in the attribute and having an action method that receives an entity instead of a single property: 1: [Remote("Validate", "Validation", AdditionalFields = "Price")] 2: public String Name 3: { 4: get; 5: set; 6: } 7: 8: public Decimal Price 9: { 10: get; 11: set; 12: } The action method will then be: 1: public ActionResult Validate(Product product) 2: { 3: return (this.Json("Product is not valid", JsonRequestBehavior.AllowGet)); 4: } Only the property to which the attribute is applied and the additional properties referenced by the AdditionalFields will be populated in the entity instance received by the validation method. The same rule previously stated applies, if you return anything other than true, it will be used as the validation error message for the entity. The remote validation is triggered automatically, but you can also call it explicitly. In the next example, I am causing the full entity validation, see the call to serialize(): 1: function validate() 2: { 3: var form = $('form'); 4: var data = form.serialize(); 5: var url = '<%: this.Url.Action("Validation", "Validate") %>'; 6: 7: var result = $.ajax 8: ( 9: { 10: type: 'POST', 11: url: url, 12: data: data, 13: async: false 14: } 15: ).responseText; 16: 17: if (result) 18: { 19: //error 20: } 21: } Finally, by implementing IValidatableObject, you can implement your validation logic on the object itself, that is, you make it self-validatable. This will only work server-side, that is, the ModelState.IsValid property will be set to false on the controller’s action method if the validation in unsuccessful. Let’s see how to implement it: 1: public class Product : IValidatableObject 2: { 3: public String Name 4: { 5: get; 6: set; 7: } 8: 9: public Decimal Price 10: { 11: get; 12: set; 13: } 14: 15: #region IValidatableObject Members 16: 17: public IEnumerable<ValidationResult> Validate(ValidationContext validationContext) 18: { 19: if ((String.IsNullOrWhiteSpace(this.Name) == true) || (this.Name.Length > 50)) 20: { 21: yield return (new ValidationResult(String.Format("The name has an invalid value: {0}", this.Name), new String[] { "Name" })); 22: } 23: 24: if ((this.Price <= 0) || (this.Price > 100)) 25: { 26: yield return (new ValidationResult(String.Format("The price has an invalid value: {0}", this.Price), new String[] { "Price" })); 27: } 28: } 29: 30: #endregion 31: } The errors returned will be matched against the model properties through the MemberNames property of the ValidationResult class and will be displayed in their proper labels, if present on the view. On the controller action method you can check for model validity by looking at ModelState.IsValid and you can get actual error messages and related properties by examining all of the entries in the ModelState dictionary: 1: Dictionary<String, String> errors = new Dictionary<String, String>(); 2: 3: foreach (KeyValuePair<String, ModelState> keyValue in this.ModelState) 4: { 5: String key = keyValue.Key; 6: ModelState modelState = keyValue.Value; 7: 8: foreach (ModelError error in modelState.Errors) 9: { 10: errors[key] = error.ErrorMessage; 11: } 12: } And these are the ways to perform date validation in ASP.NET MVC. Don’t forget to use them!

Read the article

Path is too long

- by kaleidoscope

Bugged by the irritating "Path is too long after being fully qualified" error while running in the Development Fabric? The solution is pretty funny and not so obvious unfortunately. The culprit here is not your app, but the Development Fabric. The DevFab accumulates a lot of temporary junk comprising of local storage locations, cached binaries, configuration, diagnostics information and cached compiled web site content files over its lifetime. They are typically stored at C:\Users\<username>\AppData\Local\dftmp. The Azure Tools will periodically clean this up, but some time you have to play janitor and take the law in your hands ;). The csrun.exe has quite a few tricks up its sleeve. One of them is the ability to clean the development fabric's temporary junk accumulated over time. You can do this by running the Azure command prompt with elevated privileges and running csrun.exe /devfabric:shutdown and then csrun.exe /devfabric:clean If the problem still persists then the application directory structure could indeed be too long. A workaround to this is changing the Development Fabric temporary directory to point to a shorter path. The temporary directory path can be addressed by an environment variable _CSRUN_STATE_DIRECTORY. You can try setting its value to something like "C:\WA" or "C:\A" this will reduce some 25+ characters from your path. Do not forget to close Visual Studio and expressly shutdown the dev fab with csrun.exe /devfabric:shutdown (Under elevated privileges of course). Source: http://geekswithblogs.net/IUnknown/archive/2010/02/03/no-more-path-is-too-long.aspx :D Sarang, K

Search Results

Search found 22613 results on 905 pages for 'variable length arguments'.

Page 518/905 | < Previous Page | 514 515 516 517 518 519 520 521 522 523 524 525 | Next Page >

- by Akemi Iwaya

- by Macmade

- by SeanMcAlinden

- by Rick Strahl

- by Alyssa Marie Isk

- by DigitalGeekery

- by Rick Strahl

- by judeclarke

- by Koppar

- by mulletdevil

- by ScottGu

- by Stefan Krantz

- by jamiet

- by Smallbro

- by Randy Aldrich Paulo

- by Zxy

- by Jinggen He

- by Paul Stovell

- by jamiet

- by Aditi

- by shiju

- by Strenium

- by Ricardo Peres

- by kaleidoscope

< Previous Page | 514 515 516 517 518 519 520 521 522 523 524 525 | Next Page >