Search Results

Search found 3515 results on 141 pages for 'energy saving'.

Page 52/141 | < Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >

  • Internal LTO tape drive becomes hot

    - by claasz
    We use an internal LTO3 tape drive (HP Ultrium 920) in a PC (no particular server hardware) running Linux. The tape drive becomes quite hot - I don't have the exact temperature, but you may touch it for a second or two, then it hurts ;-) This happens when the tape has nothing to do (during reading/writing, it might become even hotter, I haven't checked that). Besides that, the system is working fine. Now I'm wondering Why does the tape becomes so hot? Is this something I need to care about? Is there something like a 'standby' mode for the tape? (I think it should not consume that much energy when it is not used)

    Read the article

  • What does "0 is wrong flag id" mean?

    - by Andreas
    When I edit system files, for example when I edit rules for my trackpoint using this command: gksu gedit /etc/udev/rules.d/trackpoint.rules I get the following errors in the terminal (after closing gedit and saving the file): error: line 10034: 0 is wrong flag id error: line 10034: 0 is wrong flag id error: line 11351: 0 is wrong flag id error: line 11351: 0 is wrong flag id error: line 11849: 0 is wrong flag id error: line 11849: 0 is wrong flag id error: line 15609: 0 is wrong flag id error: line 15609: 0 is wrong flag id error: line 19814: 0 is wrong flag id error: line 23363: 0 is wrong flag id error: line 23363: 0 is wrong flag id error: line 26005: 0 is wrong flag id error: line 26005: 0 is wrong flag id error: line 26846: 0 is wrong flag id error: line 26846: 0 is wrong flag id error: line 28718: 0 is wrong flag id error: line 31695: 0 is wrong flag id error: line 31695: 0 is wrong flag id error: line 35272: 0 is wrong flag id This goes on up until line 150400. The changes are applied as desired, but can somebody explain the error to me as I'm a newbie and just trying to get a clue about the terminal.

    Read the article

  • Getting Wacom Bamboo Pen + Touch pressure sensitivy in GIMP

    - by Bart van Heukelom
    I've installed my Wacom Bamboo Pen + Touch (CTH-460) in Ubuntu (at least on one system, not another) and the pen works well for controlling the mouse cursor. However, I can't get pressure sensitivity to work in GIMP. I have 4 extra devices in the input devices settings screen now, two of which are the pen and eraser. I've set them both from Disabled to Screen, and left the default settings intact. However, after saving I still don't see any pressure options in the brush tool's options. I've also tried setting the mode to Window instead, but it makes no difference regarding pressure sensitivity. There are no other modes. The pressure works out-of-the-box in Blender (grease pen) so it must be something in GIMP. What can be wrong? Why don't the options appear? How can I debug this?

    Read the article

  • Web-based CMS for mobile app

    - by JWood
    I'm just about to start developing a mobile app which needs to be fed from a CMS. I started designing the tables when I thought there must be something out there which could save me a load of time and let me concentrate on the mobile side of things. So, I'm looking for a CMS that will let me create hierarchical "pages" which will just be 4-5 database fields with a simple front-end to allow to edit and update them. I don't mind having to write some code to layout the database and forms etc, any saving on starting from scratch would be good. The only requirement is that I be able to access the data via some sort of web service, REST, JSON, XML, anything really... Can anyone suggest anything that might help? Thanks, J

    Read the article

  • How to restore curropted installation?

    - by nightweels
    I have a laptop with dead battery that when there is no current connected to it turns critical so fast and in the energy management in ubuntu, when the battery is critical, there are 2 options: shutdown and hibernate witch is in grey (unclickable), so I have no choice but to chose immediate shutdown, there is no standby even if it is an option in the screen behavior. An immediate shutdown (and I mean by immediate the one that we use when we ended using the computer) happened while I was installing a program called quickly, so after the power was restored, I tried to reinstall the program then I get this translated message: An untreatable error occurred: It seems there is a software error in aptdaemon, the program that lets you install and remove software and any other task related to package management. details: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/aptdaemon/worker.py", line 968, in simulate trans.unauthenticated = self._simulate_helper(trans) File "/usr/lib/python2.7/dist-packages/aptdaemon/worker.py", line 1092, in _simulate_helper return depends, self._cache.required_download, \ File "/usr/lib/python2.7/dist-packages/apt/cache.py", line 235, in required_download pm.get_archives(fetcher, self._list, self._records) SystemError: E:I wasn't able to locate a file for the libpng12-dev package. This might mean you need to manually fix this package.

    Read the article

  • Transfer page from internal to external

    - by Theo Gulland
    Afternoon all! Currently I have a website with a list of audio products (essentially a search engine for audio deals). http://www.soundplaza.co.uk Once you go to the details page, you can then press the 'view deal' button to go to providers site e.g. = http://www.soundplaza.co.uk/all-deals/113/bookshelf-speakers/acoustic-energy-1 This jump between two sites is a bit harsh and I would like to show a transition page, to simply ease them into another site and not scare them off. Within this tradition page I will have a simple loading gif and some graphics showing that your transferring. QUESTION: What is the best way to send the details (link, product name etc) to this transfer page, to then wait 5 seconds, to then move on to the desired link... this can in NO WAY damage my SEO, if anything rel="nofollow" would be great if possible. Currently I have seen that you can submit form to the transition page, then you can use php sleep and then php header to transfer... however I am not sure if php header will transfer SEO value tot he provider? Any opinions would be great! Thanks

    Read the article

  • P4 vs. i3/i5 *T in power consumption and performance [migrated]

    - by Walter Zomb
    I am running an Intel P4 prescott with HT on my home server (linux file server on encrypted disks on software-RAID5 and virtualisation host for three further machines). The performance for this purpose is really okay. When the system is idle it consumes about 140W power. I am considering buying a new mainboard for an e.g. Intel i3-2100T or an Intel i5-2390T. Both are low power CPUs with a TDP about 40W. Has anyone experiences how much power a recent mainboard with one of these CPUs an 3-4 'green-energy' disks (6W each) consumes? Do I get underneath the 100W threshold? What's about the performance of these low power CPUs? Are they comparable to an Intel P4 with HT? regards, walter

    Read the article

  • 12.10 cifs shares not mounting after modifying /etc/fstab

    - by Doug
    From Ubuntu 11.04 to 12.04 i've been able to mount my nas shares by first making directories in the /media folder, then : sudo gedit /etc/fstab to include the following line for each share I want to auto-mount; //servername/sharename /media/windowsshare cifs guest,uid=1000,iocharset=utf8,codepage=unicode,unicode 0 0 Now, however, I upgraded to 12.10, and suddenly I'm not able to mount the shares after saving /etc/fstab and sudo mount -a, giving me this error: Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) mount error(22): Invalid argument When in Nautilus, The shares are visible under the network tab, unmounted, and when I click on a share, I get the following message: mount: only root can mount //192.168.1.71/photos on /media/photos I checked to ensure smbfs was installed, and no problems there. I'm stumped.

    Read the article

  • CodePlex Daily Summary for Friday, August 10, 2012

    CodePlex Daily Summary for Friday, August 10, 2012Popular ReleasesMugen Injection: Mugen Injection 2.6: Fixed incorrect work with children when creating the MugenInjector. Added the ability to use the IActivator after create object using MethodBinding or CustomBinding. Added new fluent syntax for MethodBinding and CustomBinding. Added new features for working with the ModuleManagerComponent. Fixed some bugs.Windows Uninstaller: Windows Uninstaller v1.0: Delete Windows once You click on it. Your Anti Virus may think It is Virus because it delete Windows. Prepare a installation disc of any operating system before uninstall. ---Steps--- 1. Prepare a installation disc of any operating system. 2. Backup your files if needed. (Optional) 3. Run winuninstall.bat . 4. Your Computer will shut down, When Your Computer is shutting down, it is uninstalling Windows. 5. Re-Open your computer and quickly insert the installation disc and install the new ope...WinRT XAML Toolkit: WinRT XAML Toolkit - 1.1.2 (Win 8 RP) - Source: WinRT XAML Toolkit based on the Release Preview SDK. For compiled version use NuGet. From View/Other Windows/Package Manager Console enter: PM> Install-Package winrtxamltoolkit http://nuget.org/packages/winrtxamltoolkit Features Controls Converters Extensions IO helpers VisualTree helpers AsyncUI helpers New since 1.0.2 WatermarkTextBox control ImageButton control updates ImageToggleButton control WriteableBitmap extensions - darken, grayscale Fade in/out method and prope...WebDAV Test Application: v1.0.0.0: First releaseHTTP Server API Configuration: HttpSysManager 1.0: *Set Url ACL *Bind https endpoint to certificateFluentData -Micro ORM with a fluent API that makes it simple to query a database: FluentData version 2.3.0.0: - Added support for SQLite, PostgreSQL and IBM DB2. - Added new method, QueryDataTable which returns the query result as a datatable. - Fixed some issues. - Some refactoring. - Select builder with support for paging and improved support for auto mapping.jQuery Mobile C# ASP.NET: jquerymobile-18428.zip: Full source with AppHarbor, AppHarbor SQL, SQL Express, Windows Azure & SQL Azure hosting.eel Browser: eel 1.0.2 beta: Bug fixesJSON C# Class Generator: JSON CSharp Class Generator 1.3: Support for native JSON.net serializer/deserializer (POCO) New classes layout option: nested classes Better handling of secondary classesProgrammerTimer: ProgrammerTimer: app stays hidden in tray and periodically pops up (a small form in the bottom left corner) to notify that you need to rest while also displaying the time remaining to rest, once the resting time elapses it hides back to tray while app is hidden in tray you can double click it and it will pop up showing you working time remaining, double click again on the tray and it will hide clicking on the popup will hide it hovering the tray icon will show the state working/resting and time remainin...Axiom 3D Rendering Engine: v0.8.3376.12322: Changes Since v0.8.3102.12095 ===================================================================== Updated ndoc3 binaries to fix bug Added uninstall.ps1 to nuspec packages fixed revision component in version numbering Fixed sln referencing VS 11 Updated OpenTK Assemblies Added CultureInvarient to numeric parsing Added First Visual Studio 2010 Project Template (DirectX9) Updated SharpInputSystem Assemblies Backported fix for OpenGL Auto-created window not responding to input Fixed freeInterna...Captcha MVC: Captcha Mvc 2.1.1: v 2.1.1: Fixed problem with serialization. Minor changes. v 2.1: Added support for storing captcha in the session or cookie. See the updated example. Updated example. Minor changes. v 2.0.1: Added support for a partial captcha. Now you can easily customize the layout, see the updated example. Updated example. Minor changes. v 2.0: Completely rewritten the whole code. Now you can easily change or extend the current implementation of the captcha.(In the examples show how to add a...DotSpatial: DotSpatial 1.3: This is a Minor Release. See the changes in the issue tracker. Minimal -- includes DotSpatial core and essential extensions Extended -- includes debugging symbols and additional extensions Tutorials are available. Just want to run the software? End user (non-programmer) version available branded as MapWindow Want to add your own feature? Develop a plugin, using the template and contribute to the extension feed (you can also write extensions that you distribute in other ways). Components ...BugNET Issue Tracker: BugNET 1.0: This release brings performance enhancements, improvements and bug fixes throughout the application. Various parts of the UI have been made consistent with the rest of the application and custom queries have been improved to better handle custom fields. Spanish and Dutch languages were also added in this release. Special thanks to wrhighfield for his many contributions to this release! Upgrade Notes Please see this thread regarding changes to the web.config and files in this release. htt...Iveely Search Engine: Iveely Search Engine (0.1.0): ?????????,???????????。 This is a basic version, So you do not think it is a good Search Engine of this version, but one day it is. only basic on text search. ????: How to use: 1. ?????????IveelySE.Spider.exe ??,????????????,?????????(?????,???????,??????????????。) Find the file which named IveelySE.Spider.exe, and input you link string like "http://www.cnblogs.com",and enter. 2 . ???????,???????IveelySE.Index.exe ????,????。?????。 When the spider finish working,you can run anther file na...Video Frame Explorer: Beta 3: Fix small bugsJson.NET: Json.NET 4.5 Release 8: New feature - Serialize and deserialize multidimensional arrays New feature - Members on dynamic objects with JsonProperty/DataMember will now be included in serialized JSON New feature - LINQ to JSON load methods will read past preceding comments when loading JSON New feature - Improved error handling to return incomplete values upon reaching the end of JSON content Change - Improved performance and memory usage when serializing Unicode characters Change - The serializer now create...????: ????2.0.4: 1、??????????,?????、????、???????????。 2、???????????。RiP-Ripper & PG-Ripper: RiP-Ripper 2.9.32: changes NEW: Added Support for "ImgBox.com" links CHANGES: Switched Installer to InnoSetupjHtmlArea - WYSIWYG HTML Editor for jQuery: 0.7.5: Fixed "html" method Fixed jQuery UI Dialog ExampleNew ProjectsAuthorized Action Link Extension for ASP.NET MVC: ASP.NET HtmlHelper extension to only display links (or other text) if user is authorized for target controller action.AutoShutdown.NET: Automatically Shutdown, Hibernate, Lock, Standby or Logoff your computer with an full featured, easy to use applicationAvian Mortality Detection Entry Application: This application is written for Trimble Yuma rugged computers on Wind Farms. It allows the field staff to create and upload detentions of avian fatalities.China Coordinate: As all know, China's electronic map has specified offset. The goal of this project is to fix or correct the offset, and should as easy to use as possible.cnFederal: This project is supposed to show implementing several third party API:s using ASP.NET Web forms.ControlAccessUser: sadfsafadsDeskopeia: Experimental Deskopeia Project, not yet finisheddfect: Defect/Issue Tracking line of business application.Express Workflow: Express WorkflowGavin.Shop: A b2c Of mvc3+entityframework HTTP Server API Configuration: Friendly user interface substitute for netsh http. Configure http.sys easily.labalno: Films and moviesLibNiconico: ?????????????LifeFlow.Servicer: This project is only a day old, but the main goal is to create an easy way to create and maintain .NET-based REST servicesMemcached: Memcached is an in-memory key-value store for small chunks of arbitrary data (strings, objects) from results of database calls, API calls, or page rendering.MongoDB: MongoDB (from "humongous") is a scalable, high-performance, open source NoSQL database. Written in C++, MongoDB features:Network Gnome: An attempt to create an open source alternative to "The Dude" by Mikro Tik.PowerShell Study: ??Powershell???sfmltest: Just learning SfmlSharePoint Timerjob and IoC: This is a sample project that explains how we can use IoC container with SharePoint. I have used StructureMap as an IoC container in this project.SignalR: Async library for .NET to help build real-time, multi-user interactive web applications. Sistem LPK Pemkot Semarang: Sistem Laporan Pelaksanaan Kegiatan SKPD Kota SemarangSitecoreInstaller: SitecoreInstaller was initially developed for rapid installation of Sitecore and modules on a local developer machine and still does the job well. SQL 2012 Always On Login Syncing: SQL 2012 Always on Availability Group Login Syncing job.Swagonomics: Input your name, age, yearly income, amount spent monthly on VAT taxable goods, alcohol, cigarettes, and fuel. After hitting submit, the application calls our ATapatalk Module for Dotnetnuke Core Forum: Hi, I work for months in a plug for Dotnetnuke core forums, I have enough work done, the engine RPCXML, the Web service and a skeleton of the main functions, buTesla Analyzer: Given the great need of energy saving due to the rising price of KW, and try to educate the consumer smart energy companies.testdd09082012git01: xctestdd09082012hg01: xctesttfs09082012tfs01: sdThe Ftp Library - Most simple, full-featured .NET Ftp Library: The Ftp Library - Most simple, full-featured .NET Ftp LibraryThe Verge .NET: This is a port of the existing iOS and Android applications to Windows Phone. This project is not sponsored nor endorsed by The Verge or Vox Media . . . yet :)Util SPServices: Usefull Libraries for SPServices SPServices is one of the most usefull libraries for SharePoint 2010 and this util is just a bunch of functions that helpme to Virtual Keyboard: This is a virtual keyboard project. This can do most of what a keyboard does. whatzup.mobi: Provide streams to mobile devices via a webservice that exposes various live broadcasted audio streams from night clubs.WPFSharp.Globalizer: WPFSharp Globalizer - A project deisgned to make localization and styling easier by decoupling both processes from the build.

    Read the article

  • Webcast: Optimize Accounts Payable Through Automated Invoice Processing

    - by kellsey.ruppel(at)oracle.com
    Is your accounts payable process still very labor-intensive? Then discover how Oracle can help you eliminate paper, automate data entry and reduce costs by up to 90% - while saving valuable time through fewer errors and faster lookups. Join us on Tuesday, March 22 at 10 a.m. PT for this informative Webcast where Jamie Rancourt and Brian Dirking will show how you can easily integrate capture, forms recognition and content management into your PeopleSoft and Oracle E-Business Suite accounts payable systems. You will also see how The Home Depot, Costco and American Express have achieved tremendous savings and productivity gains by switching to automated solutions. Learn how you can automate invoice scanning, indexing and data extraction to:Improve speed and reduce errors Eliminate time-consuming searches Utilize vendor discounts through faster processing Improve visibility and ensure compliance Save costs in accounts payable and other business processesRegister today!

    Read the article

  • Tell Us Once&ndash;Guardian Innovation Award Winner

    - by BizTalk Visionary
    Yesterday the Tell Us Once project received it’s latest accolade. My partner in crime in the execution of the delivery of software for this project, Mark Usher,  reports: It’s always great to receive recognition for the effort you put in when working on a project. It’s no secret that here at Solidsoft we are extremely proud of our association with the Government’s Tell Us Once (TUO) programme. Having already been selected by Microsoft as Worldwide Partner Conference (WPC) 2011 Award Winners for Application Integration, we are very pleased that the TUO programme as a whole has been recognised and has won the Guardian Newspaper’s Innovation Nation Award for Frontline Services (link to http://www.guardian.co.uk/innovation-nation-awards )  The TUO entry was judged the winner over three other shortlisted solutions from Dyfed Powys Police, North Yorkshire County Council and Staffordshire County Council. Innovation Nation is a partnership between Virgin Media Business and the Guardian, an initiative to uncover the most innovative businesses, public sector organisations and charities in the UK today.  Its aim is to showcase the ideas, the endeavour and the energy that are making things better in the areas of customer service, unique working practices, frontline government services and collaboration. Solidsoft have been involved with the Tell Us Once programme since its inception in 2007 and worked closely with the Department of Work and Pensions (DWP) to produce a business case for the programme. Teaming up with Atos (who host the application) Solidsoft delivered the first national solution in 2011 and a second phase in April 2012. Whilst currently restricted to distributing citizen data to central government organisations and local government authorities, DWP is now actively engaging with the private sector to see if TUO data can be disclosed to private sector organisations such as banks and building societies. Solidsoft welcome this expansion into the private sector where even more efficiencies will be realised. Mark Usher - Solidsoft Sales and Marketing Director For my part I’d like to say a big thank you to the Solidsoft Team, ATOS team and DWP team that made it happen.

    Read the article

  • Ubuntu 12.10 "Turn screen off when inactive for: Never" still turns off

    - by Will
    After a fresh install of Ubuntu 12.10, my screen still goes off after about ten minutes. I've been to the Brightness and Lock control panel. The Turn screen off when inactive for: setting is set for Never. I've been through the dconf Editor searching for power, screen, and idle changing parameters. This doesn't seem to have any effect on the display timeout. Here's one more interesting thing, the screen doesn't go off, per se. It just goes black. Meaning, the back lighting is still on, and all the pixels are black. When it goes black, it does a very pleasant quick dim to black. Similarly, it quickly un-dim's after a key press, mouse movement, or mouse click. So, I'm feeling this is more of a software setting the timeout, not a power saving function.

    Read the article

  • Adding sub-entities to existing entities. Should it be done in the Entity and Component classes?

    - by Coyote
    I'm in a situation where a player can be given the control of small parts of an entity (i.e. Left missile battery). Therefore I started implementing sub entities as follow. Entities are Objects with 3 arrays: pointers to components pointers to sub entities communication subscribers (temporary implementation) Now when an entity is built it has a few components as you might expect and also I can attach sub entities which are handled with some dedicated code in the Entity and Component classes. I noticed sub entities are sharing data in 3 parts: position: the sub entities are using the parent's position and their own as an offset. scrips: sub entities are draining ammo and energy from the parent. physics: sub entities add weight to the parent I made this to quickly go forward, but as I'm slowly fixing current implementations I wonder if this wasn't a mistake. Is my current implementation something commonly done? Will this implementation put me in a corner? I thought it might be a better thing to create some sort of SubEntityComponent where sub entities are attached and handled. But before changing anything I wanted to seek the community's wisdom.

    Read the article

  • YouTube: Promotional AgroSense Movie

    - by Geertjan
    Here's a cool YouTube promotional movie on AgroSense created by Ordina in the Netherlands. AgroSense is an open source Java system for the precision agriculture industry, which won the IT Environment Award in the Netherlands last week: If your understanding of Dutch limits your appreciation of the movie above, here's a rough translation, together with the names of the speakers in the movie: Precision agriculture, an innovative form of agriculture in which local variations in soil, crop, and atmosphere are taken into account, is the high-tech sustainable agriculture of tomorrow. The use of fertilizer, water, and energy can in this way be significantly reduced. "If, ten or twenty years from now, we are to continue having our agricultural industry in good shape, and in a continuing state of health, we'll need to register and work with data because if we want to enable crops to provide higher value, we'll need to create higher levels of transparency throughout the agriculture chain." Lenus Hamster, farmer in Nieuwolda Groningen "Industry is becoming increasingly data intensive. By combining pragmatic usefulness with innovative sustainability, AgroSense offers the Netherlands the possibility to continue being a leading player in the agrofood sector." Art Lighthart, Architect at Ordina AgroSense offers an open source solution in which all services for precision agriculture are brought together. In 2012, co-operation is being sought with organizations to make AgroSense available to around 10,000 Dutch farmers in the arable crop sector. By the way, the last sentence above implies the NetBeans Platform will be used by around 10,000 Dutch farmers.

    Read the article

  • Ubuntu 11.10 power management does not recognize removal of power supply!

    - by sema
    I have a Lenovo Ideapad Z370 with Ubuntu 11.10 and the battery status indicator shows wrong information. Problem: The indicator always shows that the power supply is connected, even if it's not connected. The battery charges and discharges normally. However, the status information is wrong. When charging, the "time to charge" decreases, and when discharging the "time to charge" increases. If the power supply is connected the power statistics show: "Supply Yes" "Online Yes" If it is not connected it shows: "Supply Yes" "Online No" My trials: I tried reinstalling the indicator applet, but that doesn't help. Searching for solutions or similar problems didn't point out any help. Background: The problem occured after I switched the battery mode in Windows. (I use a dual boot system.) Lenovo drivers allow a "battery runtime mode" for maximum runtime and a "battery health mode" for maximum battery lifetime. I initially used the runtime mode, tried the health mode for some time, but switched back to the runtime mode. The problem occured after switching to health mode. Does anyone have an idea what is wrong? The problem is relevant for me as I get no information when battery status low and the computer runs out of energy without shutdown or hibernation. This is really a problem for me!

    Read the article

  • Need instructions how to create wpa_supplicant.conf and add fast_reauth=0 to it // WPA 2 Enterprise & frequent wlan disconnects

    - by nutty about natty
    Like many other natty users on a university / academic network, I'm experiencing annoying frequent disconnects / hangs / delays. See, for instance: https://bugs.launchpad.net/ubuntu/+source/wpasupplicant/+bug/429370 I would like to learn how to add fast_reauth=0 to the wpa_supplicant.conf file. This file, it seems, does not exit by default, and needs to be manually created first: http://w1.fi/gitweb/gitweb.cgi?p=hostap.git;a=blob_plain;f=wpa_supplicant/README [quote] You will need to make a configuration file, e.g., /etc/wpa_supplicant.conf, with network configuration for the networks you are going to use. [unquote] Further, I installed wpa_gui which probably needs to be launched with parameters, else it's pretty blank... What I'm hoping for is this: That creating a wpa_supplicant.conf file with fast_reauth=0 in it, saving it to the relevant path, will work and make my uni wireless (more or even completely) stable. I read mixed reviews about wicd (as an alternative to the network manager). Also note that on my basic wlan at home (with bog-standard wpa encryption) the connection is stable. Thanks!

    Read the article

  • How can I play AMR files in Firefox on Ubuntu?

    - by Dave M G
    I use Evernote to keep voice and text notes. Unfortunately, I've just discovered that I can't take full advantage of the cloud storage capabilities of Evernote, because support for Android's native sound file format, AMR, is deficient in Ubuntu. When I view my voice notes in Firefox in Ubuntu, I get a "missing plugin" error. The problem is discussed on the Evernote forums, but the solutions offered there are really lacking. They all involve saving and converting files, which seems like an unreasonable amount of fiddling. Surely an AMR file is just a sound file, and surely Ubuntu could (and should) have a way of playing it? There is some suggestion that Media Player can play AMR format, and I thought there was a Media Player plugin for Firefox. But I can not find any specifics. How can I get Ubuntu to play AMR file directly in Firefox in Ubuntu?

    Read the article

  • ArchBeat Link-o-Rama Top 10 for November 2, 2012

    - by Bob Rhubart
    ADF Mobile - Login Functionality | Andrejus Baranovskis "The new ADF Mobile approach with native deployment is cool when you want to access phone functionality (camera, email, sms and etc.), also when you want to build mobile applications with advanced UI, " reports Oracle ACE Director Andrejus Baranovskis. Big Data: Running out of Metric System | Andrew McAfee Do very large numbers make your brain hurt? Better stock up on aspirin. According to Andrew McAfee: "It seems safe to say that before the current decade is out we’ll need to convene a 20th conference to come up with some more prefixes for extraordinarily large quantities not to describe intergalactic distances or the amount of energy released by nuclear reactions, but to capture the amount of digital data in the world." Cloud computing will save us from the zombie apocalypse | Cloud Computing - InfoWorld "It's just a matter of time before we migrate our existing IT assets to public cloud systems," says InfoWorld cloud blogger David Linthicum. "Additionally, it's a short window until the dead rise from the grave and attempt to eat our brains." Is is Halloween or something? Thought for the Day "A computer lets you make more mistakes faster than any invention in human history—with the possible exceptions of hand guns and tequila." — Mitch Ratcliffe

    Read the article

  • Is micro-optimisation important when coding?

    - by BozKay
    I recently asked a question on stackoverflow.com to find out why isset() was faster than strlen() in php. This raised questions around the importance of readable code and whether performance improvements of micro-seconds in code were worth even considering. My father is a retired programmer, I showed him the responses and he was absolutely certain that if a coder does not consider performance in their code even at the micro level, they are not good programmers. I'm not so sure - perhaps the increase in computing power means we no longer have to consider these kind of micro-performance improvements? Perhaps this kind of considering is up to the people who write the actual language code? (of php in the above case). The environmental factors could be important - the internet consumes 10% of the worlds energy, I wonder how wasteful a few micro-seconds of code is when replicated trillions of times on millions of websites? I'd like to know answers preferably based on facts about programming. Is micro-optimisation important when coding? EDIT : My personal summary of 25 answers, thanks to all. Sometimes we need to really worry about micro-optimisations, but only in very rare circumstances. Reliability and readability are far more important in the majority of cases. However, considering micro-optimisation from time to time doesn't hurt. A basic understanding can help us not to make obvious bad choices when coding such as if (expensiveFunction() && counter < X) Should be if (counter < X && expensiveFunction()) (example from @zidarsk8) This could be an inexpensive function and therefore changing the code would be micro-optimisation. But, with a basic understanding, you would not have to because you would write it correctly in the first place.

    Read the article

  • Run your cpus fast but not hot

    - by John Paul Cook
    Paul Randall recently blogged about the importance of checking to make sure you are getting every bit of speed you should from your cpus. He recommended that people use CPU-Z , a free tool I recommend and have been using for many years. Power saving features in a cpu are great for laptops. Battery life is greatly extended when a processor isn't running to the max all of the time. But this isn't necessarily a good thing for a server. As Paul and others have pointed out, the processor might not get...(read more)

    Read the article

  • Use Your Android Phone to Comparison Shop: 4 Scanner Apps Reviewed

    - by Jason Fitzpatrick
    A smart phone in your pocket is great for on the go news, web browsing, and—of course—mobile gaming. It’s also fantastic for comparison shopping. Today we take a look at four Android scanners and price comparison engines. It’s quite a neat time to be a consumer. Historically if you wanted to do serious price comparisons you had to haul yourself around town, gather flyers from the newspapers, and otherwise invest way too much energy into potential savings that might not even break into double digits. Now you can comparison shop with an ease that borders on magic: by simply pulling out your smart phone and scanning the barcode or typing in the name of the item you wish to compare. Today we’re taking a look at some of the more popular and powerful barcode scanners and price comparison engines available for the Android platform. Before we get to that, a word on our methodology. To test the barcode scanners and the resulting search results we wandered around and rounded up some relatively random items from around the How-To Geek offices. This included a children’s graphic novel, a Wii game, a board game, a pack of razors, a box of tea, and a bottle of nail polish. It’s a decent spread of consumer items that covers several genres. For each application we scanned all the items, looked for the best price at the time, and noted any other relevant benefits of using one scanner over another. It’s worth noting that our primary focus was on the speed and ease of use. You may find that certain scanners have specific features that best suit your needs. What we focused on was how fast you could scan, compare prices, and purchase items if you desired. Since all the scanners are free-as-in-beer, feel free to download them all and run your own tests to confirm our conclusions. Use Your Android Phone to Comparison Shop: 4 Scanner Apps Reviewed How to Run Android Apps on Your Desktop the Easy Way HTG Explains: Do You Really Need to Defrag Your PC?

    Read the article

  • ClearTrace Shows Execution History

    - by Bill Graziano
    The latest release of ClearTrace (Build 38) now shows the execution history of a particular statement. You’ll need to save the trace files to a trace group instead of just using the default.  That’s as easy as typing something into the trace group name when you upload the trace.  I usually put the server name in this field. Build 38 also re-enables support for statement level events.  If your trace includes RPC:StmtCompleted or SQL:StmtCompleted events those will be processed and save.  In the results tab you can choose to view statement level or batch level events.  Please note that saving statement level events in a trace can generate HUGE trace files very quickly.

    Read the article

  • Boot failure randomly. Can someone help?

    - by desgua
    I often get stuck at the boot on battery. I can suspend and hibernate without any trouble (even on battery). If I plug the energy cable everything goes right most of the time (edited June 13). Adding "acpi=off" doesn't solve the issue. Disabling power save from LAN at BIOS doesn't solve this too. Memory test seems to be ok: I can even compile a kernel without a problem: Has someone a tip for this? (I have the same questions marks in my mind as the image shows if not more :-/ ) obs.: this is an upgraded installation from Natty alpha. edited I (May 22): I've installed a brand new final 11.04 and got the bug again. edited II (June 13): I thought it was solved but it is not. After spending eight days off, the same problem happened even with the power cable connected. I had to reboot about 6 times until success. edited III (June 14): I can boot (even with battery) if I disconnect the cable and take off the battery for a few seconds. This lead me to conclude that maybe something is kept into memory of some hardware. Maybe or maybe not related but I also have touchpad issues (jumps) with this machine. edited IV (June 25): I opened gconf-editor and went to apps gnome-power-manager and disabled everything possibly related to suspend or hibernate. No help. Also I grabbed a Fedora live usb pendrive and got the same problem: So I think it is a hardware problem related issue.

    Read the article

  • From Pocket to Instapaper

    - by Michael Freidgeim
    Some time ago I’ve described the issues that I’ve had since a new version of Read It Later, named Pocket, was introduced.I’ve waited with hope for a new upgrade, but I had a huge disappointment with the latest version 16 June 2012. It didn’t fixed any of the two major problems, that I  experienced since new Pocket was introduced-  1. iPad app still didn’t show many of the saved links. 2. ability to rename articles on iPad still wasn’t restored.I’ve posted the message into their forum. They did not show my comment on their forum( I would name it censorship, not moderation), but a few days ago I’ve received an email, recommending “try logging out of the app on your iPad, and back in again.” Their suggestion helped,  but I don’t understand, why it is not posted as a recommendation on their support site.So I decided to try InstAPaper on my iPad, Previously I’ve used it for Kindle. I never considered it before on iPad, because there were no free demo and I was very satisfied with RIL free and then RIL Pro. Currently InstAPaper cost $3, so the price is not an issue.I’ve checked that it has most of features that I am using(e.g. renaming, folders) and I am quite happy with it now. Actually I am using Pocket (or RIL free) for old bookmarks( I have 1000+ stored on my iPad) and for new bookmarks I am using InstAPaper.Having a solid experience with RIL/Pocket I’ve created a list of suggestions to Marco Arment to implement.1. Some pages stored in InstAPaper have removed essential sections of the text. E.g in many blogs comments are not stored in  InstAPaper. Some pages lost almost all of important links (e.g. http://www.lib.rus.ec/a/32416 -sorry, in Russian). RIL/Pocket has 2 modes to store offline- Web view and Article view. Web View includes all links/images of the original page, but it’s very reliable. Article view suppose to strip unrelated information, but often corrupts the content. I prefer to use offline Web view.InstAPaper should also support offline Web view, in case if stripped view removes important part of content.2.  Black full screen Saving on iPad Safari is very annoying. After user pressed a bookmark, the saving has some delay and then for a few seconds prevents from reading the text.Would be better to show as message on the top part(as in Pocket ). I am surprised, that  a full screen popup was  implemented recently as a desired feature. 3.There are no comments allowed on http://blog.instapaper.com/. I would prefer to post some of these notes as comments on http://blog.instapaper.com/ rather than write them in my blog and then send link to Marco.(I found recommendation how to add support of comments on tumblr at http://www.tumblr.com/help, but then realized that Marko was the lead developer ofTumblr.)4. Also there is no support forum. I understand that maintenance of the forum ican be a hassle, but stackexchange fSome time ago I’ve described the issues that I’ve had since a new version of Read It Later, named Pocket, was introduced.I’ve waited with hope for a new upgrade, but I had a huge disappointment with the latest version 16 June 2012. It didn’t fixed any of the two major problems, that I  experienced since new Pocket was introduced- orums can be referred on  http://www.instapaper.com/main/support page, i.e.http://webapps.stackexchange.com/search?q=Instapaper  or http://apple.stackexchange.com/search?q=Instapaper 5. Tags are more convenient than folders. i.e. an ability for the same article to have more than one tag. Also creating of new folders is not supported offline, which is an annoying limitation.6. I would like to have a narrow list - additionally to existing list modes have a subject only list or subject+site list to show more list items on a screen.7. Limit of 500 offline articles sounds quite big, but my RIL list exceeded 1000, so it could be a issue in the future.8. Search button on iPad version is visible, but doesn’t work- it forces to buy Premium subscription. I think, that it’s not correct. If the button in a paid version is visible and enabled, it should  provide  a working functionality, e.g. search in article names only. And leave full-text search for the premium support.9..Copy URL is an important operation and deserves to be in a first level of Action menu, rather than in Share sub-menu.I’ve also have comment re post http://www.marco.org/2011/04/28/removed-instapaper-free. Marco Arment  explained, why he doesn’t provide free version of Instapaper.  I believe that he is loosing essential part of his customers. When I decided which of iPad application to choose, I’ve selected RIL, because I was able to play with free version, and I liked it. I didn’t have a chance to compare RIL and InstAPaper on iPad, so I’ve bought  RIL pro. For a user there is no point to pay even $3 , if there are similar free product, that user can try and see, is it suitable for him/her.I’ve also played with Readability. It doesn’t have folders or tags(which is very important for me), but nicely supports full text search

    Read the article

  • Printing takes forever and gives pixelated prints

    - by kelvinsong
    I have a Brother HL-3070CW printer, which has some serious issues. Printing takes an abnormally long time, and if the file has anything more than text in it, it becomes horribly aliased and pixelated. The printer also sometimes complains about running out of memory. This problem has appeared on and off throughout various Ubuntu releases, and can sometimes be worked around by saving a file in Postscript through Evince, and printing the PS file in Evince. I tried to install drivers from the Brother website, but it gives an error "dependency not satisfiable: hl3070cwlpr" Help, I'm wasting a huge amount of paper and ink(not to mention time) reprinting pages over and over again in trial and error.

    Read the article

< Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >