Search Results

Search found 1715 results on 69 pages for 'voice recording'.

Page 52/69 | < Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >

• Hearing a clicking noise from soundcard all the time

  - by Mehrdad

  I have installed Fedora 17 on my laptop. A few days ago I updated my fedora (but not upgraded). I shut down my computer and since the next time I turned it on I am hearing a clicking noise all the time from speakers. Even when I plug my headphones in I hear the noise through the headphone. I surfed over the internet and found the following shell commands: su -c 'echo "options snd_hda_intel power_save=0" /etc/modprobe.d/snd_hda_intel.conf' su -c 'echo 0 /sys/module/snd_hda_intel/parameters/power_save' I tried them but they didn't work. Here is the part of "lspci" command related to my sound-card: 00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03) I have to add that my sound-card is working and I can play some audio file, I mean I can hear the voice and noise simultaneously. But everything is OK in windows xp which is also installed on my laptop. Could it be related to the sound-card driver? If so, how can I revert it to the previous version?

  Read the article

• How can I automatically edit an email before auto-forwarding it?

  - by Miss Cellanie

  Is there a way to automatically edit emails before forwarding them? I'm getting email notifications from Foursquare that I want to send to my phone as text messages. I know how to send messages to my number using an email address (I'm in the US and use Verizon) but I don't know how to strip out any unnecessary formatting, like HTML, before the email gets sent. What I want: Ability to strip out HTML Ability to start forwarding at a specific part of the email based on a search (e.g., I might know that Foursquare starts their messages with "Hey hey!" and only want content after that phrase occurs) Ability to truncate at 160 characters Things I've tried: I'm not using Foursquare DM pings through Twitter because I have two Twitter accounts and Twitter only allows a phone to be linked to one account at a time. I'm not willing to change which account it's linked to. I tried to work around the Twitter limitation using Google Voice, but they don't support SMS short codes. I'll compromise on the features I want if I can find a free solution that doesn't require me to set up my own server. I do think this is computer related because it will happen on my computer, not on my phone. edit My current setup: Gmail in Firefox 3.0.15 on Windows XP. I use a netbook as my only personal computer. However, if the only way to accomplish this well is to set up my own mail server or something, I would still want to know that.

  Read the article

• How do I setup routing for two companies with different Internet connections on the same LAN?

  - by Clint Miller

  Here's the setup: Two companies (A & B) share office space and a LAN. A 2nd ISP is brought in and company A wants its own Internet connection (ISP A) and company B wants its own Internet connection (ISP B). VLANs are deployed internally to separate the two companies' networks (company A: VLAN 1, company B: VLAN 2, shared VOIP: VLAN 3). With separate VLANs it's simple enough to use separate DHCP servers (or separate scopes on the same server) to assign the default gateway to each company's gateway for their Internet connection. Static routes can be created on each gateway to point traffic destined for the other company's VLAN or the voice VLAN so that all nodes are reachable as expected. However, I think this is a form of asymmetrical routing, right? (The path from node A1 to node B1 is not the same as the path back from node B1 to node A1). Can I set up policy-based routing to correct this? In that case, can I assign the same default gateway to every device on all VLANs and create a routing policy on a L3 switch to look at the source address and forward traffic to the appropriate next hop? In that case, I want the routing logic to go like this: If the destination address is known, forward the traffic (traffic destined for a different VLAN). If the destination address is unknown, forward the traffic to ISP A's gateway if the source address is on VLAN A; or forward the traffic to ISP B's gateway if the source address is VLAN B. Am I thinking about this problem in the correct way? Is there another way to solve this problem that I am overlooking?

  Read the article

• [SOLVED} How do I restore my audio after uninstalling Ventrilo?

  - by Marcx

  Hi, I've a Dell studio 1555 bought on september with Windows 7 64bit Professional on it. The audio device works proprerly, while listening to audio contents (from disk or internet) When I use Ventrilo, the audio from other people sounds good and I hear their voices clearly When I use any other VOIP programs like Teamspeak 3, MSN or Skype, I hear a disturbed voice, and it's impossible to comprehend something... Anyway everything worked fine until I installed Ventrilo, but removing it didn´t solve my problem. Update: Here's a sample of how I hear others people voices.. Audio Sample After some tests, also the desktop has the same problem. (I tried TeamSpeak3) Here are some details on my laptop and desktop Laptop Dell Studio 1555 Core 2 Duo P8600 2.4Ghz 4Gb Ram Dual Channel Ati HD 4570 512Mb dedicated (up to 2048) IDT High Definition Audio Desktop Motherboard Asus P5KPL-AM Dual Core CPU E5200 2.50Ghz 2x2GB PC6400 Dual Channel Ati Radeon HD 4650 512MB VIA High Definition Audio Both computers have Windows 7 Professional 64Bit. So how do I restore my audio? SOLVED The problem was in router firmware, there was a bug that recognized VoIP traffic as a DOS attack and the router grambled every packet... I've installed the newest firmware and everything is fine :)

  Read the article

• Create a wifi hotspot in a place where an authentication is required [closed]

  - by SoftTimur

  I live in a residence where Internet is provided via cable. Once the computer is connected to the cable, launching a browser will trigger an authentication, I have a username and password to enter, then the internet will be connected. With a gateway (e.g. Wireless Cable Voice Gateway Model CBVG834G) and 2 cables, two PCs can connect to the Internet with my account at the same time. Now the question is, I don't like the cable, and would like to create a wifi hotspot. It seems realizable with the same gateway. According to the instruction on page 2-4 of the manual: Enter http://192.168.0.1 in the address field of your Internet browser. Log in to the gateway with either of the default user names, MSO or admin... However, trying to open 192.168.0.1 gives me an error on the browser. Does anyone know what happened? Is it due to the authentication required by my residence? Is there any other way to build a hotspot of wifi? PS: My system is MAC OS

  Read the article

• What apps can you only get on Mac and not Windows?

  - by ytk

  What apps do you absolutely have to use a Mac to run, and there are no decent Windows PC equivalent? This is not a religious war. Please be specific and practical It doesn't have to be a direct 1-2-1 comparison, but overall usefulness to the task I'll start off with a few: KeyNote -- the animations are quite cool and not available in PowerPoint iTune's photo sync -- on Windows it makes copy of all the photos you want to sync, effectively double the space taken up by your photos. On a Mac it's easier as long as you use iPhoto Keychain -- a centralized password manager tied to the OS. The benefit of this is you don't have to set a Master Password (like Firefox) which you need to enter when starting the browser. And it doesn't reveal your password (like Chrome, which makes no effort in hiding the password you have stored in Options) Time Machine -- 0-configuration backup in the background. Easy interface for restoring a file, or even just a contact in the address book. Text-to-speech -- works in any program, and sounds better than Windows computer voice Quick View -- press space bar to preview a file. Windows95 had quick view, but was removed.

  Read the article

• Database theory - relationship between two tables

  - by iansinke

  I have a database with two tables - let's call them Foo and Bar. Each foo may be related to any number of bars, and each bar may be related to any number of foos. I want to be able to retrieve, with one query, the foos that are associated with a certain bar, and the bars that are associated with a certain foo. My question is, what is the best way of recording these relationships? Should I have a separate table with records of each relationship (e.g. two columns, foo and bar)? Should the foo table have a column for a list of bars, and vice versa? Is there another option that I'm overlooking? I'm using SQL Server, if that makes a difference.

  Read the article

• Operation could not be completed. AVAudioRecorder iphone SDK

  - by Jonathan

  I am trying to record using the iphones microphone: This is my code: NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES); NSString *documentsDirectory = [paths objectAtIndex:0]; // the path to write file NSString *appFile = [documentsDirectory stringByAppendingPathComponent:@"testing.mp3"]; NSURL *url = [NSURL fileURLWithPath:appFile isDirectory:NO]; NSDictionary *settings = [NSDictionary dictionaryWithObjectsAndKeys: [NSNumber numberWithFloat: 44100.0], AVSampleRateKey, [NSNumber numberWithInt: kAudioFormatMPEGLayer3], AVFormatIDKey, [NSNumber numberWithInt: 1], AVNumberOfChannelsKey, [NSNumber numberWithInt: AVAudioQualityLow], AVEncoderAudioQualityKey, nil]; NSError *error; recorder = [[AVAudioRecorder alloc] initWithURL:url settings:settings error:&error]; if ([recorder prepareToRecord] == YES){ [recorder record]; }else { int errorCode = CFSwapInt32HostToBig ([error code]); NSLog(@"Error: %@ [%4.4s])" , [error localizedDescription], (char*)&errorCode); } NSLog(@"BOOL = %d", (int)recorder.recording); This is the error I get: Operation could not be completed. (OSStatus error 1718449215.) And I can not work out why this doesn't work, as a lot of the code I got from a website. Jonathan

  Read the article

• Is it possible to have AVFramework and AudioToolbox framework in one app?

  - by Satyam

  I'm trying to write develop audio related application. In that, I'm using AudioToolBox framework for recording the sound. And I'm using AVFramework to play soudns. When app is stared, it will play some mp3 file using AVFramework. And also initializes Audiotoolbox. In simulator, I'm able to record and play. But when I'm testing it on iPhone, I'm getting following error for initializing AudioToolBox. 2009-12-11 22:25:51.599 StoryBook[807:207] AudioRecorder init AudioSessionInitialize failed with error: 1768843636 Can some one tell me whether we can use both AV as well as Audio Toolbox frame works in one application? Why I'm getting that error?

  Read the article

• SQL group and order

  - by John Lambert

  I have multiple users with multiple entries recording times they arrive at destinations Somehow, with my select query I would like to only show the most recent entries for each unique user name. Here is the code that doesn't work: SELECT * FROM $dbTable GROUP BY xNAME ORDER BY xDATETIME DESC This does the name grouping fine, but as far as showing ONLY their most recent entry, is just shows the first entry it sees in the SQL table. I guess my question is, is this possible? Here is my data sample: john 7:00 chris 7:30 greg 8:00 john 8:15 greg 8:30 chris 9:00 and my desired result should only be john 8:15 chris 9:00 greg 8:30

  Read the article

• I am having trouble using FileReader to write a txt file to an array (Java), what am I doing wrong?

  - by deliriumtremens

  Scanner s = null; try { s = new Scanner(new BufferedReader(new FileReader("rates.txt"))); for (int i=0; i<9; i++){ while(s.hasNext()){rates[i] = s.next();} System.out.println(rates[i]); } }catch (IOException e){ System.out.println(e); } finally { if (s != null) { s.close(); } } When I run this code, it reads the last chunk of characters in my txt file, places them in rates[0], sticks null in 1-8, then puts that same last chunk in rates[9]. I'm not sure why it's reading the end of my file first. The contents of the txt are below.. USD 1.34 EUR 1.00 JPY 126.28 GBP 0.88 INR 60.20 It reads the 60.20, which is all it is recording in the array. Any help would be appreciated.

  Read the article

• Inserting snippets from macros

  - by Matt

  In Visual Studio 2008 I had a macro which would insert a snippet and input today's date in one of the replacements. When I try to run this macro in VS 2010 it doesn't work. No matter how I try it will not insert a snippet. When I try the following command: DTE.ExecuteCommand("Edit.InvokeSnippetFromShortcut", "snippetName") This fails with error "Error HRESULT E_FAIL has been returned from a call to a COM component. I tried recording a new macro and when I pressed the keyboard shortcut for inserting a snippet (Ctrl+K, Ctrl+X) VS gave the error "The command Insert Snippet is not currently available." Did MS remove the ability to insert snippets from macros? If so this really is a shame because macros have functionality not found in snippets and vice versa.

  Read the article

• C# Sequence Diagramm Reverse Engineering Tool?

  - by Wayne

  It's essential for me to find a tool that will reverse engineer sequence diagrams by integrating with the debugger. I suppose using the profiler could work also but less desirable. It's a key requirement that the tool in question will record all threads of execution since the app, TickZoom, is heavily parallelized. We just evaluated a most awesome tool from Sparx called Enterprise Architect which integrates with the debugger. It allows you to set a break point, start recording method traces from that break point. It's a lovely design and GUI. Hope it works for you but it only records a single thread of execution so that makes it unusable for us. I will put in a feature request to Sparx. But hope to find a similar tool that does this now since that's the only features we need--not all the other stuff that Sparx also does rather well. Sincerely, Wayne

  Read the article

• Python proxy an application

  - by sharvey

  Does anyone know of a library that enables you to run an application inside some kind of sandbox, with virtual mouse and keyboard support. The use case would be to create some kind of visual test runner, that would replay all actions taken during recording and play them back. So far I found autopy, but the fact that it controls the real mouse position is problematic, because it prevents user interaction with other tools (debugger or anything) while running. Cross platform would be nice, but either windows or os x is fine. Python would be ideal but anything that you could create python bindings for would be ok too.

  Read the article

• Unselected UIPickerView value

  - by morticae

  According to the documentation, if a UIPickerView has no selected value, the expected return from selectedRowInComponent: should be: "A zero-indexed number identifying the selected row, or -1 if no row is selected." However, if I check the value the very line after initializing one, its value is 0. Even if I then manually set it to -1, it still returns 0. I would like to be able to detect whether the user has chosen a value yet or not, without recording it in a local variable. Is this possible? example: UIPickerView *picker = [[UIPickerView alloc] initWithFrame:CGRectMake(0.0, 46.0, 320.0, 216.0)]; [picker selectRow:-1 inComponent:0 animated:NO]; NSLog(@"SELECTED %d", [picker selectedRowInComponent:0]); expected output: SELECTED -1 actual output: SELECTED 0

  Read the article

• Sequence Diagram Reverse Engineering Tool?

  - by Wayne

  It's essential for me to find a tool that will reverse engineer sequence diagrams by integrating with the debugger. I suppose using the profiler could work also but less desirable. It's a key requirement that the tool in question will record all threads of execution since the app, TickZoom, is heavily parallelized. We just evaluated a most awesome tool from Sparx called Enterprise Architect which integrates with the debugger. It allows you to set a break point, start recording method traces from that break point. It's a lovely design and GUI. Hope it works for you but it only records a single thread of execution so that makes it unusable for us. I will put in a feature request to Sparx. But hope to find a similar tool that already does this since that's the only feature we need--not all the other amazing features that Sparx Enterprise Architect appears to do rather well.

  Read the article

• Novocaine - How to loop file playback? (iOS)

  - by lppier

  I'm using Novocaine by alexbw Novocaine for my audio project. I'm playing around with the example code here for file reading. The file plays back with no problem. I would like to loop this recording with the gap between the loops - any suggestion as to how I can do so? Thanks. Pier. // AUDIO FILE READING OHHH YEAHHHH // ======================================== NSArray *pathComponents = [NSArray arrayWithObjects: [NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES) lastObject], @"testrecording.wav", nil]; NSURL *inputFileURL = [NSURL fileURLWithPathComponents:pathComponents]; NSLog(@"URL: %@", inputFileURL); fileReader = [[AudioFileReader alloc] initWithAudioFileURL:inputFileURL samplingRate:audioManager.samplingRate numChannels:audioManager.numOutputChannels]; [fileReader play]; [fileReader setCurrentTime:0.0]; //float duration = fileReader.getDuration; [audioManager setOutputBlock:^(float *data, UInt32 numFrames, UInt32 numChannels) { [fileReader retrieveFreshAudio:data numFrames:numFrames numChannels:numChannels]; NSLog(@"Time: %f", [fileReader getCurrentTime]); }];

  Read the article

• Looking for some thoughts on an image printing app

  - by Alex

  Hey All, Im looking for thoughts/advice. I have an upcoming project (all .net) that will require the following: pulls data once a day from an online service provider based on certain criteria. saves data locally for reference and reporting the data thats pulled will be used to create gift cards. So after the data is loaded, a process will run to generate "virtual cards" and send them to a network printer. Once printed, the system will updated the local data recording a successful or failed print. My initial thought was to create a windows service to pull the data...but then I couldnt decide how I was going to put a "virtual card" together and get it to print. Then I considered doing it as a WPF app. I figure that will give me access to the graphics and printing ability. Maybe neither of these are the right direction....Any ideas or thoughts would be greatly appreciated. Alex

  Read the article

• Web Performance testing using VS2010 "Testing a file download"

  - by cheedep

  Hi All, I am trying out the VS 2010 testing tools for the first time. And I tried recording a web performance test and my actions had a file download implemented as in the KB article here http://support.microsoft.com/kb/812406 by streaming chunks of 10000 bytes. However my test is failing at the download saying "The response stream has been closed". Please help me understand why it is happening this way also any suggestions how you would test such a file download. My main aim was to see how the download was performing for a load test with Intercontinental 350kbps connection on files of about 30-50 MB. Thanks.

  Read the article

• HTML - Word Doc Images

  - by Michael

  Okay I have roughly 150 + pages of procedures all written in MS word. The person who wrote the procedures did an excellent job of recording the process how to perform specific tasks. This individual went though and created screen shots a MS word doc. There are approx 2 screen shots per page. So it is roughly 300 images and I do not want to recreate the wheel. Does anyone know a quick way of handling the images? The written portion is pretty straightforward but the images is what I am struggling with. Regards, Mike

  Read the article

• Determining the magnitude of a certain frequency on the iPhone

  - by eagle

  I'm wondering what's the easiest/best way to determine the magnitude of a given frequency in a sound. It's my understanding that a FFT function will return the magnitudes of all frequencies in a signal. I'm wondering if there is any shortcut I could use if I'm only concerned about a specific frequency. I'll be using the iPhone mic to record the audio. My guess is that I'll be using the Audio Queue Services for recording since I don't need to record the audio to a file. I'm using SDK 4.0, so I can use any of the functions defined in the Accelerate framework (e.g. FFT functions) if needed. Update: I updated the question to be more clear as per Conrad's suggestion.

  Read the article

• Prevent Visual Studio Web Test from changing request details

  - by keithwarren7

  I have a service that accepts Xmla queries for Analysis services, often times those queries themselves will have a string that contains a fragment that looks something like {{[Time].[Year].[All]}} Recording these requests works fine but when I try to re-run the test I get an error from the test runner... Request failed: Exception occurred: There is no context parameter with the name ' [Time].[Year].[All]' in the WebTestContext This was confusing for some time but when I asked VS to generate a coded version of the test I was able to see the problem a bit better. VS searches for the '{{' and '}}' tokens and makes changes, considering those areas to refer to Context parameters, the code looks like this.Context["\n\t[Time].[Year].[All]"].ToString() Anyone know how to instruct Visual Studio to not perform this replacement operation? Or another way around this issue?

  Read the article

• Looking for "tech call" tracking software.

  - by jacook11

  The company I work for is looking for the best way to track "tech calls". We would most likely develop in house using vb.net, but possibly could look at using some open source vb.net software already out there. We will probably want to track just the basic info like client, datetime, length of call & a notes section about the call. One idea that has floated around is recording everyone's calls, watching a directory for new files and popping up a form so the user can enter the info when the call is over. We really don't want to spend a lot of time tracking/logging these calls, something quick & simple. Anybody have a good idea or solution that they have used before?

  Read the article

• Using Accelerometer in Wiimote for Physics Practicals

  - by Omar

  I have to develop some software in my school to utilize the accelerometer in the Wiimote for recording data from experiments, for example finding the acceleration and velocity of a moving object. I understand how the accelerometer values will be used but I am sort of stuck on the programming front. There is a set of things that I would like to do: Live streaming of data from the Wiimote via bluetooth Use the accelerometer values to find velocity and displacment via integration Plot a set of results Avoid the use of the infrared sensor on the Wiimote Please can anyone give me their thoughts on how to go about this. Also it would be great if people could direct me to existing projects that utizlise the wiimote. Also can someone suggest what would be the best programming language to use for this. My current bet is on using Visual basic. Any sort of help is greatly appretiated.

  Read the article

• Which is better for quickly developing small utilities? AutoIt or AutoHotKey?

  - by Abhijeet Pathak

  Which is better for quickly developing small utilities? AutoIt or AutoHotKey or something else? I need to develop some small software for which I think using some professional suite like Visual Studio will be overkill. Most of the macro recording tools like AutoIt or AutoHotKey provide enough power to write decent application. Plus they are small and free. Which option will be good? Using one of these tools or using some other small/free compiler?

  Read the article

< Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >