Search Results

Search found 21955 results on 879 pages for 'self host'.

Page 525/879 | < Previous Page | 521 522 523 524 525 526 527 528 529 530 531 532  | Next Page >

• What's causing Remote Access error 807 using rasdial.exe to connect to a PPTP VPN?

  - by Dylan Beattie

  I'm using rasdial.exe to connect an offsite server to our VPN. Remote box is a Windows 2008 x64 server; the VPN host at this end is a Watchguard Firebox x750e running Fireware 10.2 It connects fine about 20-30% of the time. The rest of the time I get: Remote Access error 807 - The network connection between your computer and the VPN server was interrupted. This can be caused by a problem in the VPN transmission and is commonly the result of internet latency or simply that your VPN server has reached capacity. Please try to reconnect to the VPN server. If this problem persists, contact the VPN administrator and analyze quality of network connectivity. For more help on this error: Type 'hh netcfg.chm' In help, click Troubleshooting, then Error Messages, then 807 The VPN isn't full, and it's 100Mb dedicated fibre on both ends so I can't believe it's a connectivity issue - especially since I'm RDP'ed into the remote box whilst trying to do this! Any bright ideas as to what might be causing the problem? Thanks, Dylan

  Read the article

• Mono fast cgi not working on nginx

  - by Luka Horvatic

  I installed mono fast cgi for nginx following instructions on: http://www.mono-project.com/FastCGI_Nginx but when i try to load test aspx file i getting 502 error gateway,and following error in error log: 2011/11/28 18:49:51 [error] 5376#0: *6 upstream sent unexpected FastCGI record: 3 while reading response header from upstream, client: ipadress, server: ipadress, request: "GET /default.aspx HTTP/1.1", upstream: "fastcgi://127.0.0.1:9999", host: "ipadress" I tried different things to change but always same result,except maybe sometime in error log is number 1 or 3 instead 6.Nginx ver is 1.03 64 bit,mono and xsp latest versions. Any idea what could be wrong?

  Read the article

• ESXI 4 IPMI 2.0 - Cannot connect to IPMI after boot past bios

  - by adamflavell

  Dear All, I would appreciate any help here. I have a Supermicro 6016T-NTRF running ESXI 4 fine. The health monitors are showing up so ESXI is picking up the IPMI status. But I cannot connect to the host remotely via the dedicated IPMI nic. When the machine is in bios section I CAN connect but as soon as ESXI starts to boot I get blocked. Supermicro say the issue must be that ESXI is blocking the IPMI ports. How can this be corrected? I have read that there is no firewall on ESXI 4. Thanks, Adam

  Read the article

• Troubleshooting PXE-E11: ARP Timeout error under VMware ESXi 4 and HPSA 7.8

  - by warren

  I am running HP Server Automation v7.8 in a lab environment on VMware ESXi, managed via vSphere 4. On the same host I have several small VMs for OS provisioning testing (512MB RAM, 10GB hdd, one NIC on the same vSwitch that HPSA is running on). DHCP is configured to hand-out addresses in the 192.168.10.151-200 range. On boot of the VM, it receives an IP (eg 192.168.10.198) within seconds. However, after it receives its IP, a PXE-E11: ARP Timeout error occurs in trying to boot from the DHCP server. I do not know if this is a HPSA-specific error, as I have seen reports of the PXE-E11 error on various forums. Proposed solutions I have seen so far (changing VLAN settings, for example) have not been applicable to my environment. Are there any pointers/troubleshooting steps that can be taken to resolve this?

  Read the article

• VMware Workstation Error: Cannot find a valid peer process

  - by Robert Claypool

  I am running VMware Workstation 6.1.5 (build-126130) on CentOS 5.3 (Final). One of the guest machines is reporting an error when I try to power on the most recent snapshot. Snapshots further back in the timeline will power on without any problem. Error: Unable to change virtual machine power state: Cannot find a valid peer process to connect to. Apparently I'm not the only one with this problem. Others have been reporting it since at least early 2005. The forums say to delete unused lock files and restart any hung VMware processes (or restart the host machine), which I have done. Still no luck. Any other ideas?

  Read the article

• Unable to configure DD-WRT SNMP monitoring with Zabbix

  - by Jien Wai

  Installed Zabbix on Ubuntu but not sure what setting I missed. Base on my concept, I would like to using SNMP to monitoring DD-WRT router which it using SNMP service. I did enable to SNMP service at DD-WRT router page. And also created a host at Zabbix with included DD-WRT template. After I done it I still unable to get any connection/information at Zabbix which mean the router doesn't communicate with Zabbix. The above picture is my DD-WRT's SNMP configuration. http://img13.imageshack.us/img13/2228/rhj2.png Also this is the Zabbix configuration which I have created the service to monitoring my DD-WRT router. http://imageshack.us/a/img853/7311/hlpr.png

  Read the article

• Apple Mail authentication failure to Apache James while Thunderbird connects

  - by dacracot

  I have an Apache James 2.3.2 email server running on RHEL 5. I have been connecting to it successfully for months using Thunderbird (currently version 12.0.1). I am attempting to connect to the same account using Apple's Mail 6.5. On the first dialog, to add an account to Apple's Mail, it asks for full name, email address, and password. It then asks for an incoming mail server. I put account type equal to POP, the incoming mail server equal to the host in my email address, and my username and password. It comes back with the error: "Logging in to the POP server "" failed. Make sure the user name and password you entered are correct, then click Continue. If the information isn't correct, you cannot receive messages." While the dialogs are different in Thunderbird, I believe that I am giving it exactly the same parameters, and succeeding with authentication.

  Read the article

• Apple Mail authentication failure to Apache James while Thunderbird connects

  - by dacracot

  I have an Apache James 2.3.2 email server running on RHEL 5. I have been connecting to it successfully for months using Thunderbird (currently version 12.0.1). I am attempting to connect to the same account using Apple's Mail 6.5. On the first dialog, to add an account to Apple's Mail, it asks for full name, email address, and password. It then asks for an incoming mail server. I put account type equal to POP, the incoming mail server equal to the host in my email address, and my username and password. It comes back with the error: "Logging in to the POP server "" failed. Make sure the user name and password you entered are correct, then click Continue. If the information isn't correct, you cannot receive messages." While the dialogs are different in Thunderbird, I believe that I am giving it exactly the same parameters, and succeeding with authentication.

  Read the article

• Intranet Site Authentication Issues on SBS 2008

  - by mwillmott

  Hello, Simply, the Sharepoint intranet site that is automatically installed with SBS 2008 is bound to port 5555 in IIS so to get to it you can browse to server-name:5555 and then authenticate using domain credentials. I have added another binding on port 80 using a host header so intranet.localdomain.local (and added the required record in the DNS). This works fine from any computer on the domain, you can go to the nicer address and authenticate no problem. However, when you browse to the port 80 binding on the local server it reaches it but fails to authenticate. I cannot figure out why and it is really annoying. Not essential to fix but it would be nice. Any ideas? Michael

  Read the article

• If-Modified-Since vs If-None-Match

  - by Roger

  This question is based on this article response header HTTP/1.1 200 OK Last-Modified: Tue, 12 Dec 2006 03:03:59 GMT ETag: "10c24bc-4ab-457e1c1f" Content-Length: 12195 request header GET /i/yahoo.gif HTTP/1.1 Host: us.yimg.com If-Modified-Since: Tue, 12 Dec 2006 03:03:59 GMT If-None-Match: "10c24bc-4ab-457e1c1f" HTTP/1.1 304 Not Modified In this case browser is sending both If-None-Match and If-Modified-Since. My question is on the server side do I need to match BOTH etag and If-Modified-Since before I send 304. Or Should I just look at etag and send 304 if etag is a match. In this case I am ignoring If-Modified-Since .

  Read the article

• Cannot access Network Shares on Windows Server 2008 running VisualSVN Server

  - by mwillmott

  Hi, I have installed VisualSVN server on Windows Server 2008. The server is part of a domain but not the domain controller, it is just a data server and now an SVN server. VisualSVN uses port 80 and can only be access from inside the network (i do i by going to the dns name of the server). However, ever since i have installed this, other computers on the network can no longer access the shared folders on the server EXCEPT the domain controller which has no problems accessing the shares. I am stumped, i am guessing it is something to do with Apache running and not using host-headers (or whatever the Apache equivalent may be) but just being bound to the servers DNS name or IP. Any suggestions?

  Read the article

• 404 Error Behavior on Godaddy

  - by liciousx

  My goDaddy account for hosting and on that host i have multiple domains. goDaddy offers me only one 404 redirect for all of my domains: domain1.com/gadfgsdf (nonexistent link) is redirected to domain1.com domain2.com/gadf (nonexistent link) is redirected to domain1.com domain.com/sagsdg (nonexistent link) is redirected to domain1.com I need for one of my domains to make the redirect on the same domain: domain4.com/gsdhgfhf (nonexistent link) to be redirected to domain4.com I am on Windows and i am using Wordpress on all of my domains. I looked for the web.config file but didn't find it. I new at this and i would really appreciate it if you can explain more detailed. Thanks

  Read the article

• EC2 hosted service multi-tenant dynamic DNS solution

  - by accidental admin

  I want to change the model of my EC2 hosted service to have a separate sub domain for each tenant (ie. .example.com). My primary DNS is now with dnsmadeeasy.com, but their dynamic DNS offering seem pretty weak: it requires the API to use my full dnsmadeeasy.com account credentials, I rather have the API use a limited privilege credential that can only add/remove/modify subdomain records from what I gather it only allows to modify existing records, does not allow me to dynamically add/remove records for new tenant subdomains My question what are my alternatives? Is there something in the dnsmadeeasy API offering I misunderstood and I should just use them? Is there some other similar DNS service that has a DDNS offering that satisfies my requirements? Or should I just bite the bullet and host my own DNS (my fear is not configuration/learning/know how, my fear is reliability). If you recommend the latter, can you detail the necessary steps or a link to a good tutorial how to?

  Read the article

• w2k3 chkdsk errors as vmware 1.8 guest

  - by Sean Kirkpatrick

  We have two Dell servers (CentOS 5.x) hosting a variety of VMs including 3 W2K3 and 1 W2K servers as guests as well as a handful of other Linux guests. Each Windows VM has 2 drives, C: and D:. on 2 of the W2K3 and the W2K boxes we have recurring errors appearing on a daily basis as reported by CHKDSK. We'll run CHKDSK /f and reboot all affected machines and the errors are reported as fixed. The next day CHKDSK will report the same errors. None of the linux guests nor either host report errors when the are rebooted. The RAID controllers are not reporting errors. We're beginning to think that these are phantom errors somehow, but I'm not willing to go to the bank on that just yet. Anybody have similar experiences or advice? Thanks! Sean

  Read the article

• Access FTPS from behind Forefront TMG

  - by Maxim V. Pavlov

  I have a web server on which IIS 7 host an SSL-enabled site. The client in am trying to connect with is behind the corporate Forefront TMG. The app is Total Commander - a file manager shell, that has the ability to connect to SSL FTP by putting a checkmark over SSL/TLS in the FTP connection settings. When FTP Access Filter in FF is enabled, my connection attempt fails on Negociating TLS step of FTP connection. The same happens even if I enable Allow Active FTP in the filter's settings. But when I disable the FTP Access Filter on FF completely, I am able to connect fine. How to configure FF TMG to allow FTPS?

  Read the article

• Remote Desktop Connection - Connection Failed

  - by NLV

  Let me explain the problem. My system is connected to a network and 'was' having XP installed in it. Recently i formatted the system and installed windows server 2003 and added the machine to the network. Everything is working fine like mapping the network drives, pinging the machines etc. But i've the following problems. I'm not able to do a remote desktop connection to another system in the network. Some systems in the network is able to do a remote desktop to my machine. But not all. If i host any web service in my system i'm not able to connect it from any other machine in the network. I've already configured the Remote Desktop to accept connections. Any ideas? NLV

  Read the article

• CNAME subdomain of subdomain with content on first subdomain

  - by BandonRandon

  Okay so maybe that title is a bit confusing but here is what I'm trying to do: I have a subdomain with content at my.example.com I want to set up something like sub.my.example.com This does not seem to work if there is content on my.example.com However if there is not content on the first subdomain it seems that it's okay to CNAME the record to example2.org This is my first real experiance with CNAME so I'm wondering about common errors to check for. my.example.com is an A record and sub.my.example.com is a CNAME EDIT I am managing the DNS though Web Host Manger (WHM) Dns records. The content is at http://vbx.knowconceptdw.net and I'm trying to set a voicemail CNAME to point to http://api.twillio.com at http://voicemail.vbx.knowconceptdw.net

  Read the article

• VMware ESXi - varying CPU time (CPU reservation)

  - by Tomo

  Hello! I'm running FreeBSD 7.2 under VMware ESXi 3.5. Host has 2 physical CPUs and the BSD box is currently the only running VM. Only one virtual CPU is assigned to the VM. When measuring CPU time of a specific program, I get very different results from time to time. Processor usage is reported differently by VMware, based on the system load. Is it possible to assign a constant share of a physical CPU to specific VM? I would like the CPU time to be more or less much constant. I tried setting CPU reservation when configuring VM in the VMware Infrastructure Client, but the CPU time still varies a lot. Thanks in advance!

  Read the article

• NPS EAP authentication failing after Windows Update

  - by sqlreader

  I have a Windows 2008 Std server running NPS. After applying the latest round of updates (including Root Certificates for April 2012 KB931125 (See:http://support.microsoft.com/kb/933430/)), EAP authentication is failing due to being malformed. Sample error (Security/Event ID 6273), truncated for brevity: Authentication Details: Proxy Policy Name: Use Windows authentication for all users Network Policy Name: Wireless Access Authentication Provider: Windows Authentication Server: nps-host.corp.contoso.com Authentication Type: PEAP EAP Type: - Account Session Identifier: - Reason Code: 266 Reason: The message received was unexpected or badly formatted. The NPS policy (Wireless Access) is configured accordingly (for Constraints/Authentication methods) EAP Types: Microsoft: Protected EAP (PEAP) - with a valid certificate from ADCS Microsoft: Secured password (EAP-MSCHAP v2) Less secure authentication methods: Microsoft Encrypted Authentication version 2 (MS-CHAP-v2) User can change password after it has expired Microsoft Encrypted Authentication (MS-CHAP) User can change password after it has expired We've tested a different RADIUS server without the aforementioned patch, and removed EAP as an authentication type and experienced success. Has anyone else experienced this issue?

  Read the article

• Hot deploying with Tomcat Manager fails because file already exists

  - by Artem

  Tomcat beginner question that I hope will help many. Could someone explain how TomCat hot deploy is supposed to work. We have a currently deployed 'TomCatTest', and we want to fix a small bug in 'TomCatTest' with no downtime for users. We are using the Tomcat Manager console, and just trying to upload a file there. We must be making a stupid error, but we see: 'FAIL - War file "TomCatTest.war" already exists on server' There are many many posts suggesting this works somehow: http://serverfault.com/questions/120706/replace-single-file-on-tomcat-deployed-war http://tomcat.apache.org/tomcat-6.0-doc/config/host.html#Automatic%20Application%20Deployment For the life of me, I can't figure out this simple problem. Could you help, please?

  Read the article

• Setting php values in php-fpm confs instead of php.ini

  - by zsero

  I'd like to set values in php-fpm conf files what are normally set in php.ini. I'm using nginx. I've created the following setting, but I'm not sure if this would work. php_value[memory_limit] = 96M php_value[max_execution_time] = 120 php_value[max_input_time] = 300 php_value[php_post_max_size] = 25M php_value[upload_max_filesize] = 25M Do you think if this is OK like this? What happens when a value is both set in php.ini and in php-fpm conf files? The php-fpm overrides the ini one? Finally, isn't it a problem that this way I can set different values for all virtual hosts? I mean php.ini seems like a global setting, while this is host dependent. Can different hosts run with different memory-limits, etc?

  Read the article

• Validating SSL clients using a list of authorised certificates instead of a Certificate Authority

  - by Gavin Brown

  Is it possible to configure Apache (or any other SSL-aware server) to only accept connections from clients presenting a certificate from a pre-defined list? These certificates may be signed by any CA (and may be self-signed). A while back I tried to get client certificate validation working in the EPP system of the domain registry I work for. The EPP protocol spec mandates use of "mutual strong client-server authentication". In practice, this means that both the client and the server must validate the certificate of the other peer in the session. We created a private certificate authority and asked registrars to submit CSRs, which we then signed. This seemed to us to be the simplest solution, but many of our registrars objected: they were used to obtaining a client certificate from a CA, and submitting that certificate to the registry. So we had to scrap the system. I have been trying to find a way of implementing this system in our server, which is based on the mod_epp module for Apache.

  Read the article

• .htaccess allow from hostname?

  - by Mikey B

  Ubuntu 9.10 Apache2 Hi Guys, Long story short, I need to restrict access to a certain part of my web site based on a dynamic IP source address that changes every now and then. Historically, I've just added the following to htaccess... order deny,allow deny from all # allow my dynamic IP address allow from <dynamic ip> But the problem is that I'll have to manually make this change every time the IP changes. Ideally I'd like to specify a hostname instead... something like: order deny,allow deny from all # allow my host allow from hostname.whatever.local That doesn't seemed to have worked though. I get an error 403 - access forbidden. Does .htaccess not support hostnames?

  Read the article

• Linux software raid fails to include one device for one RAID1 array

  - by user1389890

  One of my four Linux software raid arrays drops one of its two devices when I reboot my system. The other three arrays work fine. I am running RAID1 on kernel version 2.6.32-5-amd64. Every time I reboot, /dev/md2 comes up with only one device. I can manually add the device by saying $ sudo mdadm /dev/md2 --add /dev/sdc1. This works fine, and mdadm confirms that the device has been re-added as follows: mdadm: re-added /dev/sdc1 After adding the device and and allowing the array time to resynch, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdc1[0] sdd1[1] 732574464 blocks [2/2] [UU] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> Then after I reboot, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdd1[1] 732574464 blocks [2/1] [_U] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> During reboot, here is the output of $ sudo cat /var/log/syslog | grep mdadm : Jun 22 19:00:08 rook mdadm[1709]: RebuildFinished event detected on md device /dev/md2 Jun 22 19:00:08 rook mdadm[1709]: SpareActive event detected on md device /dev/md2, component device /dev/sdc1 Jun 22 19:00:20 rook kernel: [ 7819.446412] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446415] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446782] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446785] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515844] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515847] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606829] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606832] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855616] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855620] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855950] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855952] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962169] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962171] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054365] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054368] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588662] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588664] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601990] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601991] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602693] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602695] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605981] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605983] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606138] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606139] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:48 rook mdadm[1737]: DegradedArray event detected on md device /dev/md2 Here is the mdadm.conf file: ARRAY /dev/md0 metadata=0.90 UUID=92121d42:37f46b82:926983e9:7d8aad9b ARRAY /dev/md1 metadata=0.90 UUID=9c1bafc3:1762d51d:c1ae3c29:66348110 ARRAY /dev/md2 metadata=0.90 UUID=98cea6ca:25b5f305:49e8ec88:e84bc7f0 ARRAY /dev/md3 metadata=1.2 name=rook:3 UUID=ca3fce37:95d49a09:badd0ddc:b63a4792 I also ran $ sudo smartctl -t long /dev/sdc and no hardware issues were detected. As long as I do not reboot, /dev/md2 seems to work fine. Does anyone have any suggestions? Here is the output of $ sudo mdadm -E /dev/sdc1 after re-adding the device and letting it resync: /dev/sdc1: Magic : a92b4efc Version : 0.90.00 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Array Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Checksum : 5fd6cc13 - correct Events : 180998 Number Major Minor RaidDevice State this 0 8 33 0 active sync /dev/sdc1 0 0 8 33 0 active sync /dev/sdc1 1 1 8 49 1 active sync /dev/sdd1 Here is the output of $ sudo mdadm -D /dev/md2 after re-adding the device and letting it resync: /dev/md2: Version : 0.90 Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Array Size : 732574464 (698.64 GiB 750.16 GB) Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Events : 0.180998 Number Major Minor RaidDevice State 0 8 33 0 active sync /dev/sdc1 1 8 49 1 active sync /dev/sdd1

  Read the article

• Unix : `nc` on Ubuntu vs Redhat (netcat)

  - by bguiz

  How do I achieve the equivalent of nc -q in Redhat 5? Details? nc -q -1 local host ${PORT} ${CMD} In Ubuntu, nc may be use as above, with the -q option. See manpage. -q after EOF on stdin, wait the specified number of seconds and then quit. If seconds is negative, wait forever. However, this option is not available in Redhat 5. See manpage. (Note: The Red Hat website is horrible to search, if someone finds their manpage for nc, please edit this post or comment with the new link).

  Read the article

< Previous Page | 521 522 523 524 525 526 527 528 529 530 531 532  | Next Page >