Search Results

Search found 16902 results on 677 pages for 'strange errors'.

Page 526/677 | < Previous Page | 522 523 524 525 526 527 528 529 530 531 532 533  | Next Page >

• Restore a database with LDF file only

  - by Martin

  First of all, i know how stupid it is not to have a any backup. I can't help it, but i have to (try) to solve it. I have a transaction log (LDF) file from a SQL Server 2000 database that contains all transactions since the creation of the database. No truncation has been done. The MDF file is gone. Probably because of some disk failure. There is no backup. Not from the original database and not from the transaction log. I have tried to link the transaction log to a new clean database. But (ofcourse) that failed because SQL Server checks the identity of both files. I have read about software that can read the transaction log. ApexSQL seems to do that. I tried to install the trial version but it gives weird errors when trying to start the program. Anyone knows a solution for me? It may contain third party software, but i prefer a clean SQL Server solution.

  Read the article

• Active Directory problems while trying to perfom compare operation

  - by Alex

  I have CentOs 5.5 with Apache 2.2 and SVN installed. Also I have Windows 2003 R2 with Active Directory. I'm trying to authorize users via AD so each user have access to repo if he is a member of corespondent group in AD. Here is my apache config: LoadModule dav_svn_module modules/mod_dav_svn.so LoadModule authz_svn_module modules/mod_authz_svn.so LDAPVerifyServerCert off ServerName svn.mydomain.com DocumentRoot /var/www/svn.mydomain.com/htdocs RewriteEngine On [Location /] AuthType basic AuthBasicProvider ldap AuthzLDAPAuthoritative on AuthLDAPURL ldaps://comp1.mydomain.com:636/DC=mydomain,DC=com?sAMAccountName?sub?(objectClass=*) AuthLDAPBindDN [email protected] AuthLDAPBindPassword binduserpassword [/Location] [Location /repos/test] DAV svn SVNPath /var/svn/repos/test AuthName "SVN repository for test" Require ldap-group CN=test,CN=ProjectGroups,DC=mydomain,DC=com [/Location] When I'm using "Require valid-user" everything goes fine, "Require ldap-user" also works. But as soon as I use "Require ldap-group" authorization fails. Trere are no errors in apache logs, but Active Directory shows folowing error: Event Type: Information Event Source: NTDS LDAP Event Category: LDAP Interface Event ID: 1138 Date: 10/9/2010 Time: 1:28:52 PM User: MYDOMAIN\binduser Computer: COMP1 Description: Internal event: Function ldap_compare entered. Event Type: Error Event Source: NTDS General Event Category: Internal Processing Event ID: 1481 Date: 10/9/2010 Time: 1:28:52 PM User: MYDOMAIN\binduser Computer: COMP1 Description: Internal error: The operation on the object failed. Additional Data Error value: 2 0000208D: NameErr: DSID-031001CD, problem 2001 (NO_OBJECT), data 0, best match of: 'DC=mydomain,DC=com' I'm confused by this problem. What I'm doing wrong?

  Read the article

• Debian Wheezy (testing) df reported volume size

  - by TheRoadrunner

  I am a bit confused about the /dev/sda* references since I installed Wheezy instead of Squeeze on a testing box. fdisk -l returns: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e9623 Device Boot Start End Blocks Id System /dev/sda1 * 2048 480278527 240138240 83 Linux /dev/sda2 480280574 488396799 4058113 5 Extended /dev/sda5 480280576 488396799 4058112 82 Linux swap / Solaris This seems correct. But df -h /dev/sda (and /dev/sda1 and /dev/sda2 and /dev/sda5) returns: Filesystem Size Used Avail Use% Mounted on udev 10M 0 10M 0% /dev The same happens with every entry under /dev/disk/by-id and /dev/disk/by-path. Only one of two entries under /dev/disk/by-uuid returns the correct volume size: df -h /dev/disk/by-uuid/cacdbad6-7e6b-4e80-84ba-e3c77ef48796 Filesystem Size Used Avail Use% Mounted on /dev/disk/by-uuid/cacdbad6-7e6b-4e80-84ba-e3c77ef48796 229G 22G 196G 11% / Contents of /etc/fstab: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sda1 during installation UUID=cacdbad6-7e6b-4e80-84ba-e3c77ef48796 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=45840d13-ee36-4e77-8e73-16cbdff25eb1 none swap sw 0 0 /dev/sr0 /media/cdrom0 udf,iso9660 user,noauto 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto 0 0 It seems all other references than the uuid points to the swap partition. Is this because Wheezy is in testing, and should it be reported as an error?

  Read the article

• Is it possible to command a common router without using the web interface?

  - by MDeSchaepmeester

  Some background The internet arrangement in my student home is really weird. There is one ethernet outlet and several wifi hotspots. Either way requires a login through a web site to get internet access. This is annoying as each device needs to login seperately and with a PS3 for example, it is impossible to get connected at all since the web login procedure doesn't work. Therefore I have installed a D-Link DIR-635 router which is connected to the ethernet outlet. It has DHCP enabled so it uses NAT, but whatever it is connected to also uses NAT and I've read this should not work. A fellow student tried it with an Apple Airport but that keeps giving errors related to NAT after NAT. Anyway my setup does work so bonus points if you can clarify this. I need to login to the web site I mentioned earlier with any device, after which all devices in my LAN have connectivity. This is great. Except... In short From time to time, I lose internet connectivity and my D-Link DIR-635 router needs to do a DHCP renew. I can do this via the web interface but my life would be easier if I could just run a cmd file which tells my router to do this without all the hassle. This would setup a connection to my router and execute the proper command. I have tried googling but couldn't find much helpful stuff.

  Read the article

• Could replacing an old hard drive's circuit board make it work again?

  - by oscilatingcretin

  I have a 12-year-old, 10gb Maxtor drive that died on me around 7 years ago, but I have not had the heart to throw it away. When the computer powers on, it whirrs silently as it tries to spin up and then it stops. So, a few years ago, I sent it off for professional data recovery. They were able to retrieve quite a bit from it, but I know there's a bunch more there. It only cost $700, so I just chalked up the lackluster recovery effort to "you get what you pay for" considering that most companies will charge you several thousands of dollars for this kind of data recovery. When they sent the drive back, I couldn't help but plug it back in just to see if maybe they unjammed something in the process of disassembling/reassembling the drive. To my surprise, the drive had a much healthier spin-up sound and actually stayed spinning for several minutes before winding down to a halt. Windows is even able to detect and interact with the drive, but I get I/O errors after so many minutes of waiting for it to mount. Before I start doing stupid stuff with it like dropping it on the ground, freezing it, crapping on it, etc, I decided to buy the exact same model off Ebay so that I could swap the circuit boards as a last-ditch effort. While it's en route, I thought I'd come here to ask if this is even a worthwhile effort and, if even remotely so, what should I know before ripping off the old board and slapping on the new?

  Read the article

• Full Apache config migration

  - by Victor Rashkov

  I searched alot and didn't find an applicable answer. I have a working LAMP setup on Ubuntu machine and I have to migrate to a new server in a different country. The old server is 11.10, the new server is 12.04LTS. My problem is that I simply can not remember the steps I followed when I configured the current server which is not the basic LAMP install. It is Apache with FastCGI, SuEXEC, a GD library, worker MPM and all sitting on top of a mhddfs system. There are also other configs I've changed and I can not recall what they are. Because of the complexity of the setup, my attempts to migrate to the new server fail. I get permissions errors, cgi problems etc. Therefore my question is : Is there a sane way to simply tar a full backup of the current web server installation, including MySQL, Php amd the apache server with all configs, and then move it to the new machine? I shall be forever thankful on any advise. So far non of thise I found here gave me an answer. Thanks!

  Read the article

• Unrelated Files Corrupted on System Restore

  - by Yar

  I restored OSX 10.6.2 today (was 10.6.3 and not booting) by copying the system over from a backup. The data directories were not touched. In the data directories, I'm seeing some files as 0 bytes, and getting permission-denied errors when copying, even when using sudo cp or the Finder itself. Some programs, differently, take the files at face value and see no permission problems (such as zip), but they see the files as zero bytes, which would be game-over for recovery. cp: .git/objects/fe/86b676974a44aa7f128a55bf27670f4a1073ca: could not copy extended attributes to /eraseme/blah/.git/objects/fe/86b676974a44aa7f128a55bf27670f4a1073ca: Operation not permitted I have tried sudo chown, sudo chmod -R 777 and sudo chflags -R nouchg which do not change the end result. Strangely, this is only affecting my .git directories (perhaps because they start with a period, but renaming them -- which works -- does not change anything). What else can I do to take ownership of these files? Edit: This question comes from StackOverflow because I originally thought it was a GIT problem. It's definitely not (just) GIT. Anyway, this is to help put some of the comments in context.

  Read the article

• Dead Linux server - need help and options

  - by Choi S.

  All, I have a Dell PE 1950 w/ 2 SATA drives in a software RAID1. OS is CentOS 5.5 (2.6.18.x). Starting this afternoon we received HW errors (something on the bus is bad, E171F) and the machine became unresponsive. We hard booted and it came back up for about 5 hours but then it happened again. I'm trying to figure out our options. Unfortunately we do not have similar hardware but I have a small desktop that I can use. I was contemplating putting one of the drives into the desktop and then starting it up. My goal was to then P2V it using Vmware converter but apparently the free v5.x doesn't support hot cloning/converting on a RAID volume, only the Enterprise 4.x version of Converter does. My questions are: 1.) Is putting a single drive out of a RAID1 pair into another piece of HW is safe? Based on my research and understanding it appears to be but would like confirmation. 2.) Is there any work around to the Vmware Converter not supporting RAID volumes during a hot clone/convert session? 3.) Are there other options I'm overlooking? Thanks in advance for reading and responding. --Choi S.

  Read the article

• Monitor attached to motherboard is out of frequency

  - by Neilvert Noval

  I don't know if this is appropriate to ask it here in superuser. Please, just route this to appropriate stackexchange site if found unrelevant. Here's my scenario. I have bought a new motherboard (MSI 785GT-E63). I already have an old CRT monitor connected to it. After I install a linux OS to it, my monitor will display that it is: Out of frequency. Current frequency is 89Hz. The operating output of my monitor is (around) 60-70Hz. I would like to get this thing work. How can I let my CRT display properly? I was thinking of lowering down video frequency output of my motherboard, but I can't find any settings on my BIOS setup. Additional info: My monitor is attached directly to the built-in video adaptor of my motherboard. (No additional video cards) Install of OS is complete without errors. Please help.

  Read the article

• htaccess hacked - i've deleted code and file - what next?

  - by user1762595

  My website was hacked recently. I think i've found the code that was added to the htaccess file, deleted it and then added script to prevent the htaccess file being accessed again. I've also deleted the php file that the hacked code refers to (common.php). What do i need to do next? I'm not a programmer or website developer but i really wanted to see if i could fix the problem myself as i've spent quite a few hours trying and don't give up easily. Here is the hacked code that i deleted; <IfModule mod_rewrite.c> RewriteEngine On RewriteCond %{HTTP_USER_AGENT} (google|yahoo) [OR] RewriteCond %{HTTP_REFERER} (google|yahoo) RewriteCond %{REQUEST_URI} /$ [OR] RewriteCond %{REQUEST_FILENAME} (shtml|html|htm|php|xml|phtml|asp|aspx)$ [NC] RewriteCond %{REQUEST_FILENAME} !common.php RewriteCond /home/httpd/vhosts/bluestardive.com/httpdocs/common.php -f RewriteRule ^.*$ /common.php [L] </IfModule> this code has to stay in the htaccess file as it redirects my url to seo friendly ones or the website errors, but has this code been hacked as well? # Apache search queries statistic module RewriteEngine On AddHandler php5-fastcgi .php .php5 # <contrexx> # <core_modules__alias> RewriteRule ^about-us$ /index.php?page=883 [L,NC] RewriteRule ^ausfluge-und-aktivitaten$ /index.php?page=800 [L,NC] RewriteRule ^bluestardive-news$ /index.php?page=919 [L,NC] RewriteRule ^bookings$ /index.php?page=911 [L,NC] RewriteRule ^diveresort$ /index.php?page=879 [L,NC] RewriteRule ^diving$ /index.php?page=880 [L,NC] RewriteRule ^excursions-and-activities$ /index.php?page=881 [L,NC] RewriteRule ^galerie$ /index.php?section=gallery [L,NC] RewriteRule ^oceannight$ http://www.bluestardive.com/index.php?page=906 [L,NC] RewriteRule ^philosophy$ /index.php?page=846 [L,NC] RewriteRule ^reservation$ /index.php?page=917 [L,NC] RewriteRule ^reservierung$ /index.php?page=918 [L,NC] RewriteRule ^resort$ /index.php?page=798 [L,NC] # </core_modules__alias> # </contrexx> many thanks for any help Claire

  Read the article

• How should I configure my Apache Hosts File to serve a different site for localhost than for my domain/publicip?

  - by rofls

  I'm trying to test out a LAMP (with PHP5 specifically) setup with Django already serving a website. I want to do the PHP stuff on localhost for now, so that when I do something like this: curl http://localhost/database/script.php?var=1, I get a response from the php server. Right now I'm getting a Django error. I tried something like this in the default file in sites-available: Listen 80 <VirtualHost aaa.bbb.ccc.ddd> ServerName localhost DocumentRoot /home/phpsite </VirtualHost> where aaa.bbb.ccc.ddd is the local ip address, and changing my actual site's settings to specify the public ip, like this: Listen 80 <VirtualHost www.xxx.yyy.zzz> ServerName mysite.com DocumentRoot /srv/www/mysite WSGIScriptAlias / /srv/www/mysite.wsgi </VirtualHost> but then I start getting all kinds of errors when I start apache, such as port ::[80] is already in use or something. I noticed that the hosts file that's located in /etc/apache2/ is apparently pointing everything to mysite.com, including my local ip as well as 127.0.0.1 and 127.0.1.1; Do I need to change the configuration there too?

  Read the article

• RHEL 5.3 Kickstart - How specify location of individual package in Workstation folder?

  - by Ed

  I keep getting "package does not exist" errors during the install. I made a kickstart ISO to create an unattended install of a RHEL 5.3 build machine for C++ software releases. It pulls the kickstart config file from our internal web server. This is handy; it makes it easy to test and modify without having to make a new ISO. And I plan to check it in to version control if I can get it working. Anyway, the rpm packages are located in two folders on the disk; Client and Workstation. The packages install fine for the ones that are physically located under the Client folder. It cannot find those under the Workstation folder such as as doxygen and subversion complaining that packages do not exist. Is there a way to specify the individual package location? # ----------------------------------------------------------------------------- # P A C K A G E S # ----------------------------------------------------------------------------- %packages @gnome-desktop @core @base @base-x @printing @development-tools emacs kexec-tools fipscheck xorg-x11-server-Xnest xorg-x11-server-Xvfb #Packages Located in Workstation Folder *** Install can not find any of these ?? bison doxygen gcc-c++ subversion zlib-devel freetype-devel libxml2-devel Thanks in advance, -Ed

  Read the article

• Why does my simple Raid 1 backup storage perform really slow sometimes?

  - by randomguy

  I bought 2x Samsung F3 EcoGreen 2TB hard disks to make a backup storage. I put them in Raid 1 (mirror) mode. Made a single partition and formatted it to NTFS, running Windows 7. For some reason, accessing the drive's contents (simply by navigating folders) is sometimes really slow. Like opening D:/photos/ can sometimes take several seconds before it starts showing any of the folder's contents. Same applies for other folders. What could be causing this and what could I do to improve the performance? I remember that there was an option somewhere inside Windows to choose fast access but less reliable persistence operations (read/write). It was a tick inside some dialog. At the time, it felt like a good idea to take the tick away from the option and get more reliable persistence but slower access, but now I'm regretting. I'm unable to find this dialog.. I've looked hard. I don't know, if it would make any difference. Oh, and I've ran scan disk and defrag on the drive. No errors and speed isn't improved.

  Read the article

• What can prevent a Server 2008 machine accessing its OWN UNC shares?

  - by Simon

  I need to set up a UNC share for my hosted dedicated server to access a share on itself. Unfortunately TFS requires a UNC share. I am on a Windows Server 2008 Standard SP2 64bit dedicated server behind a PIX 501 firewall hosted with GoDaddy. I just cannot get the server to access itself and get this error: Windows cannot access \\SERVER\SHARE Check the spelling of the name.. etc. I've found numerous questions about this but no answer to my problem. Server 2008 Standard x64 SP2 Workgroup - not domain Windows Firewall is off Computer browser service is on I am trying to access \\MYMACHINE\TFS-BUILDS by typing in - or double clicking. Neither works. Machine has single network card Filesharing wizard says share was ok Share was showing under 'Computer management' Permissions are set to 'everyone' full control No obvious errors in eventlog Reboot didn't fix it Unfortunately I cannot try to access other shares in or out of this machine because it is a hosted dedicated server and the only machine behind a hardware firewall. The only thing left i can think of is that the hardware firewall needs to be configured. I don't think it is this because we have a 2003 Server machine behind a different hardware firewall and that one works fine. What on earth is left?!

  Read the article

• How do I set up Grub properly to quad-boot Windows, Mac OS X, Linux, and FreeBSD?

  - by Joe

  Grub has gone completely insane on me. My quad-boot system was working great up until I upgraded Ubuntu to 12.04. Since Ubuntu overwrote the Grub stuff I had to repair it with my Mac OS X and FreeBSD entries. After this, trying to boot Mac OS X gave me the error "couldn't open file" and FreeBSD gave the error "no such partition". Windows and Ubuntu worked fine. So I tried repairing again because I figured something must've gone wrong in the install process. Then only Ubuntu would boot. Trying to boot Windows would give me the error "no argument specified". I tried repairing Grub once again, since I seemed to be getting different results each time. This time, Ubuntu no longer appeared in the Grub menu, and the errors for the other OSes were the same. So I booted into the Ubuntu 12.04 live CD and ran Boot-Repair with recommended settings. Now Grub is completely skipped and Windows boots up. I have absolutely no idea what is going on or why I get different results every time I reinstall Grub. Here is how my partitions are set up: sda1 - Storage drive, sdb1 - Windows, sdb2 - Mac OS X, sdb3 - FreeBSD, sdb4 - Extended, sdb5 - Ubuntu, sdb6 - Shared storage, sdb7 - Shared Storage, Here's my grub.cfg file: grub.cfg

  Read the article

• Nginx + PHPBB3 reverse proxy images problem

  - by siberiano

  Hello all I have a problem with my Nginx Frontend + Apache2 backend + PHPBB3 software. It doesn't load the CSS and the images neither. I get constant errors like these: 2010/04/14 16:57:25 [error] 13365#0: *69 open() "/var/www/foo/styles/styles/coffee_time/theme/large.css" failed (2: No such file or directory), client: 83.44.175.237, server: www.foo.com, request: "GET /styles/coffee_time/theme/large.css HTTP/1.1", host: "www.foo.com", referrer: "http://www.foo.com/viewforum.php?f=43" This is my config of the site: server { listen 80; server_name www.foo.com; access_log /var/log/nginx/foo.access.log; # serve static files directly location ~* ^.+.(jpg|jpeg|gif|css|png|js|ico)$ { access_log off; expires 30d; root /var/www/trasteando/; } location / { root /var/www/foo/; index /var/www/foo/index.php; } # proxy the PHP scripts to predefined upstream .apache. # location ~ .php$ { proxy_pass http://apache; } location /styles/ { root /var/www/foo/styles/; }

  Read the article

• upload process times out for different time zones

  - by shilezi

  I have an inhouse(NY) app that cients can upload files to. Usually uploads go pretty quickly for most clients but this particularly cient in the UK always have problems with uploads. not sure if they get any errors but since we log all exceptions, we see this...Error: System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> System.Net.WebException: The operation has timed out at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request) at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request) at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) at ... This shouldn't even be an issue because since we noticed they have had this issue before so we bumped up these to maxRequestLength="2097151" executionTimeout="14400". Further investigating this error, i read that it could be a thread timeout since the default is 20minute. A worker process with process id of serving application pool was shutdown due to inactivity. Application Pool timeout configuration was set to 20 minutes. A new worker process will be started when needed. Problem is I am not entirely sure if that really is the case as all other cients mostly North American, have no issues but then their uploads don't seem to go beyond 80mb and the UK client have done a 700mb upload before that i know of. We have tested 750mb before and the whole process took about 15min for upload and processing. Any help on what the real issue here might be? Thanks.

  Read the article

• System randomly freezes yet mouse still moves

  - by user784446

  This problem has lasted for the past 48 hours. The first time it happened, a program I was running stopped responding, so I tried to end it from task manager. The processes at first were listed fine until hovered upon. Eventually, despite the mouse still being able to move, after a few persisting clicks the mouse finally stopped moving. The screen went blank shortly thereafter. The second time it occurred, items on the screen stopped responding - hovering over the taskbar or such wouldn't elicit a response. Sound would still play however. Eventually, the mouse became unresponsive and the system restarted itself. I suspect that it may be a problem of my SSD drive. After looking through some Google search results, I downloaded HDTunePro to determine if there's a problem with the drive. Results returned a problem of reallocated sector count. An error scan also revealed 48 bad sectors. Also, an attempt to backup the contents of the most important areas of the drive returned a few explorer "Error: cannot read source from disk" errors. Should I ditch the drive and use another drive or is there anything that can be done to repair the drive? SSD: OCZ Petrol 64gb CPU: AMD Athlon II X4 640 RAM: Generic 3GB DDR2 Motherboard: Gigabyte MA74GM-S2H OS: Windows 7 Ultimate x64 Thanks!

  Read the article

• How do I configure IIS to allow access to network resources for PHP scripts?

  - by Dereleased

  I am currently working on a PHP front-end that joins together a series of applications running on separate servers; many of these applications generate files that I need access to, but these files (for various reasons) reside on their parent servers. If I, from the command line, issue a bit of script such as: <?php var_dump(glob("\\\\machine-name\\some\\share\\*")); I will get the full contents of that directory, proving that there's no problem programmatically with PHP reading the contents of a UNC share. However, if I try to execute the same script from the web server, I get an empty array -- more specifically, if I use more explicitly functions designed to "open" a directory like it was a file, I get access errors. I believe this to be a permissions issue, but I am not a server/network administrator type, so I'm not sure what I need to do to correct this and get my script running, and the links I've checked out have not been a terrible amount of help, perhaps due to my background, or lack thereof as far as IIS is concerned, coupled with the fact that we are not actually using .NET for this. Relevant Stats: Windows Server 2008 Standard SP2 IIS 7.0 PHP 5.2.9 I will be connecting to two types of servers: a few other nearly-identical Server 2008 machines, and a machine running embedded XP. Links that have not been particularly helpful but maybe I am just misreading: http://support.microsoft.com/?id=306158 http://support.microsoft.com/kb/207671/EN-US/ http://support.microsoft.com/kb/280383/

  Read the article

• In need of assistance for recovering a lost partition

  - by Tek

  The program that has worked for the most part is Active@ Partition Recovery. I'm so close but yet so far from recovering my data. Okay so here's what happens. In the following screenshot (blanked out a folder and filename with profanity in case some of you guys are at work :P), it detects the partition I accidentally deleted with ALL 100% of my data listed. Of course, I didn't write ANY data to that drive after I did this. But when I click "recover" and finishes the recovery process, in Windows I click on the partition that was just was just recovered... It's EMPTY. The program seems to be able to see my lost files, but when I recover the partition windows doesn't seem to think the same =( Things I tried: I tried running a chkdsk /r /f after I recovered the partition, apparently it couldn't find any errors. Tried using other software like TestDisk to recover the partition, but they (all) act similar to Windows in that it detects the (missing) partition but when I browse it there's no files. The partition is there along with all the file and data information. The sector information is also in the screenshot, is there any way I can use this to my advantage in recovering my data? Other information: Dualboot: Win8 / Ubuntu 12.10 x64 1TB Internal desktop drive, GPT Layout, NTFS formatted drive, 64K allocation size.

  Read the article

• vmware player won't run on CentOS due to missing /dev/vmmon, what could be the problem?

  - by Graphics Noob

  So I've tried installing vmware player 3.1.4 and 3.1.3 and both times had the same problem, when I try to load a VM I get the error "Could not open /dev/vmmon". When I ls /dev/ I can see there is no "vmmon" device present. When I try running: sudo /etc/init.d/vmware start I get the output: Starting VMware services: VMware USB Arbitrator [ OK ] Virtual machine monitor [FAILED] Virtual machine communication interface [ OK ] VM communication interface socket family [ OK ] Blocking file system [ OK ] Virtual ethernet [FAILED] which shows that the Virtual Machine Monitor fails to load. I tried following the advice on this site and ran vmware-modconfig --console --install-all I notice during the compilation there are no errors, but at the end I get the message: Starting VMware services: VMware USB Arbitrator [ OK ] Virtual machine monitor [FAILED] Virtual machine communication interface [ OK ] VM communication interface socket family [ OK ] Blocking file system [ OK ] Virtual ethernet [ OK ] Unable to start services Out of curiousity I tried: sudo /sbin/insmod /lib/modules/2.6.18-238.9.1.el5xen/misc/vmmod.ko But got the error message: insmod: error inserting 'vmmon.ko': -1 Invalid module format I have a feeling this may be the root of the problem, but I don't know what could be causing it or how to fix it.

  Read the article

• Multiple copies off the same printer on Windows 7 from PrintUIEntry

  - by Kev

  I currently have a number of bat files which work perfectly fine on Windows XP which install the same printer multiple times with a number of finisher options set - e.g. after running the bat file below I would end up with four printers in the printer drop down called Sharp Kits Printer - A4 Single Sided Sharp Kits Printer - A4 Single Sided Stapled Sharp Kits Printer - A4 Duplex Stapled Sharp Kits Printer - A4 Duplex which all have there options configured in the relevant way. I have amended on Windows 7 to point to correct INF file and printer name in the INF files - a single printer installs fine. However when I run the complete batch file only the first printer in it is installed - occassionally the later ones flash up in the GUI but then vanish when you press F5 and are still missing after a reboot. SET QUEUENAME=http://192.168.7.123:631/printers/Sharp700 SET PPD=J:\DRIVERS\Printers\MX700-Win7-64\SJ1JWENG.INF SET PPDENTRYNAME=SHARP MX-M700U PPD J: cd "\DRIVERS\Printers\MX700-Win7-64" SET NICENAME="Sharp Kits Printer - A4 Single Sided" SET PREFS="J:\SCRIPTS\Printers-Win7-64bit\Sharp_SINGLE_SETTINGS.dat" %SYSTEMDRIVE%\WINDOWS\system32\rundll32.exe %SYSTEMDRIVE%\WINDOWS\system32\printui.dll,PrintUIEntry /w /b %NICENAME% /x /n "part of the n switch" /f "%PPD%" /if /r "%QUEUENAME%" /m "%PPDENTRYNAME%" rem restore settings go here... SET NICENAME="Sharp Kits Printer - A4 Duplex" SET PREFS="J:\SCRIPTS\Printers\Sharp_DUPLEX_SETTINGS.dat" %SYSTEMDRIVE%\WINDOWS\system32\rundll32.exe %SYSTEMDRIVE%\WINDOWS\system32\printui.dll,PrintUIEntry /w /b %NICENAME% /x /n "part of the n switch" /f "%PPD%" /if /r "%QUEUENAME%" /m "%PPDENTRYNAME%" rem restore settings go here... I have tried adding the "/u" paramater to the end, I have changed the "/n" paramater to be different (e.g. n1, n2,n3 etc) - both of these result in the same. I have also tried to change the port (/r) to have "_1" (etc) on the end like the GUI would but this errors as the port doesn't exist. Is it possible to do this on Windows 7, and if so how?

  Read the article

• Broken Vista. Can't open Windows settings.

  - by serena

  My neighbor has a Lenovo laptop with Windows Vista Home Basic. She's a noob and just uses the laptop for internet purposes. She said she had to close down Windows improperly (sometime ago, maybe 6 months) because of system freeze. She realized there's something wrong with her Windows when she tried to open Windows update settings. I took a look at the system and determined the following errors: When I click on Windows Updates, a bare white window opens for a sec. and closes immediately. When I try to open Computer Properties, the same thing happens. (Windows+Break doesn't work either.) When I try to open Bluetooth settings, the same thing happens. So Vista won't let me open any Windows settings, but installed programs work correctly (games, applications etc.). She has no Windows Vista discs since the laptop came with preinstalled genuine Vista. She also has no recovery discs. I don't think there is a system restore point for the time the system was stable. Now what can we do to solve this big problem?

  Read the article

• install Oracle’s VirtualBox

  - by Shamith c

  I am trying to install Oracle’s VirtualBox. I used sudo dpkg -i virtualbox-4.2_4.2.4-81684\~Ubuntu\~quantal_i386.deb Getting following errors (Reading database ... 226237 files and directories currently installed.) Preparing to replace virtualbox-4.2 4.2.4-81684~Ubuntu~quantal (using virtualbox-4.2_4.2.4-81684~Ubuntu~quantal_i386.deb) ... Unpacking replacement virtualbox-4.2 ... dpkg: dependency problems prevent configuration of virtualbox-4.2: virtualbox-4.2 depends on libc6 (>= 2.15); however: Version of libc6 on system is 2.13-20ubuntu5. virtualbox-4.2 depends on libqtcore4 (>= 4:4.8.0); however: Version of libqtcore4 on system is 4:4.7.4-0ubuntu8.1. virtualbox-4.2 depends on libqtgui4 (>= 4:4.8.0); however: Version of libqtgui4 on system is 4:4.7.4-0ubuntu8.1. dpkg: error processing virtualbox-4.2 (--install): dependency problems - leaving unconfigured Processing triggers for ureadahead ... Processing triggers for shared-mime-info ... How to solve it?

  Read the article

• How to fix Windows 7 when System Recovery Options hangs?

  - by seansand

  The battery power ran out on my HP G60 laptop and it shut down. Even after recharging, Windows 7 will now not start up. After any attempted startup, it bluescreens and takes me to the "Startup Repair (recommended)" / "Start Windows Normally" console screen. "Startup Repair (recommended)" appears to be the right choice, but when I choose it, I get taken to a screen which appears to be System Recovery Options (it's the same wallpaper as the screenshots here: http://www.sevenforums.com/tutorials/668-system-recovery-options.html). However, I just get a cursor with nothing else; no "System Recovery Options" window ever pops up. (A black console screen does pop up for a split-second but too fast to be able to read the text.) The empty screen with cursor hangs indefinitely. System Recovery Options normally runs off of a partition on the laptop hard drive. When I got the laptop, I also created a System Repair Disc (in fact I have more than one) and when I try use any of them; they all result in the same wallpaper and empty screen with lone cursor. Ctrl-Alt-Del does nothing. The computer did not come with a Windows 7 installation disc, so there's no obvious way to reinstall Windows 7. Safe mode does not work; startup fails and I just get sent back to the "Startup Repair (recommended)"/"Start Windows Normally" console screen. "Start in last good state" does not work either, same result as above. Running a memory & hard disk check found no errors. Do I have any options at all? "System Recovery Options" seems to be what I want, but the screen that is supposed to take me to them just hangs.

  Read the article

< Previous Page | 522 523 524 525 526 527 528 529 530 531 532 533  | Next Page >