Search Results

Search found 23103 results on 925 pages for 'performance issues and ha'.

Page 530/925 | < Previous Page | 526 527 528 529 530 531 532 533 534 535 536 537  | Next Page >

• internet connection problem related to a recurring registry error

  - by mats

  I have a Windows XP desktop system connected to the Internet via ethernet LAN. Initially, none of my browsers were connecting to the Internet, but I was able to update my antivirus software and all of my connection settings were perfect. I was able to solve the problem by running WinSock XP, which apparently fixes connection problems that have been caused by registry issues. My problem now is that every time I shut down the machine, the problem comes back (Internet browsers won't connect). Does anyone have any ideas/suggestions on this? Thanks

  Read the article

• Server 2008 Hard Faults

  - by claw

  Hey all, plase bear with me as I haven't looked at a server in a very long time. The problem I am having is with a Windows 2008 Standard FE Service Pack 2 Intel Xeon X3430 @ 2.40 2.39 GHZ 4 GB Memory 64 Bit There seems to be no problems other than the physical memory peaking at 91%, always with over 100 Hard Faults Per Second. To my understanding hard faults should be fairly rare on a machine with. Are there any logs I can show you? Or investigate myself. The general performance of the machine is ok, i can access SBS2008 and change settings fairly smoothly without hangs etc. However, we connect to the server and do quite a bit of SQL via an application. For a record to retrieve say 20 rows, it can take 20+ seconds. Thanks in advance, Jamie EDIT: What the server is used for: IIS ASP Web Service SQL 2008 List item Exchange unable to upload screenshots due to low reputation - why doesnt my SO work here :)

  Read the article

• Cheap windows shared hosting service

  - by Elangovan

  Hi I have recently purchased a domain from go daddy, now I am looking for a cheap windows hosting. Following are my requirements Shared Windows hosting Should be cheap in price Should have at least one SQL server Db and one mysql db. Should support atleast asp.net 3.5 and php Will be good if it has support for asp.net mvc (no problem even if it is not available also) Should be able to install third party blog sites. Bandwidth, total space and performance are not very important. Silverlight is also an added advantage (no problem even if it is not available also). There should be no advertisement or banner added by the hosting company in the site. Should have support for subdomains

  Read the article

• Terminal Services - MS Access Frequently "Not Responding"

  - by jonfhancock

  Exposition: We use a program built in MS Access that I serve via Terminal Services. I just installed a new TS Server with a Quad Core 2.6GHz Xeon, 8GB RAM, and 4 SATA drives in a RAID 0. In installed Server 2008 R2 (64bit obviously). It's only role is TS. The problem: With just a few sessions (under 10), I start getting frequent Not Responding messages in each session. When it happens, the users aren't doing anything particularly taxing, just form navigation and simple insert queries. I can live with some stalls, but it is visually jarring in WS08 because the screen goes gray, and it presents a dialog offering to wait or close with some other options. Questions: Any suggestions for improving performance and reducing hangs? Is it possible to disable the dialog (always wait) and screen graying?

  Read the article

• write-through RAM disk, or massive caching of file system?

  - by Will

  I have a program that is very heavily hitting the file system, reading and writing randomly to a set of working files. The files total several gigabytes in size, but I can spare the RAM to keep them all mostly in memory. The machines this program runs on are typically Ubuntu Linux boxes. Is there a way to configure the file system to have a very very large cache, and even to cache writes so they hit the disk later? I understand the issues with power loss or such, and am prepared to accept that. Crashing aside, in normal operation the writes should eventually reach the disk! Or is there a way to create a RAM disk that writes-through to real disk?

  Read the article

• Trying to determine the correct number of XFS allocation groups for postgresql server on Linux

  - by HBlend

  I am running a postgres 8.4.5 server on the linux 2.6.33.7 kernel on an 8 disk raid array with an LSI controller. Most of the tables are around 1GB or less. I know that XFS uses allocation groups (AG) to achieve I/O parallelism. My first question is, does this mean that if two tables are in the same AG, all I/O requests are queued to both of them if either is being read from/written to? If so, I assume I would want to spread my tables across as my allocation groups as possible, correct? Wouldn't this ensure that multiple users querying different tables would get the best performance?

  Read the article

• Pinning Google Chrome's "Application Shortcuts" to the Windows 7 Taskbar

  - by Humphrey

  I love the idea behind Google Chromes Application Shortcuts, but they don't integrate well for me into the Windows 7 taskbar. Ideally, I'd like to be able to have my most used webpages (gmail, calendar, etc) as separate windows, pinned to the Windows 7 taskbar. I've created some application shortcuts on my desktop, but I've come across the following problems. If I open my gmail application shortcut, and then later on open a normal chrome window the new window will also use the gmail icon in the taskbar, even if that window has nothing to do with gmail. (What's weirder, is that this new window then uses a high-res gmail icon, but my actually application shortcut window uses a low-res icon. If I pin the application shortcut to the taskbar, then the icon turns into the regular chrome icon. Any idea's how to fix these issues? Or are they bugs in google chrome? Chrome version: 4.0.249.89

  Read the article

• Best choice for off-site backup: dd vs tar

  - by plok

  I have two 1TB single-partition hard disks configured as RAID1, of which I would like to make an off-site backup on a third disk, which I am still to buy. The idea is to store the backup at a relative's house, considerably far away from my place, in the hope that all the information will be safe in the case of a global thermonuclear apocalypse. Of course, this backup would be well encrypted. What I still have to decide is whether I am going to simply tar the entire partition or, instead, use dd to create an image of the disks. Is there any non-trivial difference between these two approaches that I could be overlooking? This off-site backup would be updated no more than two or three times a year, in the best of the cases, so performance should not be a factor to be pondered at all. What, and why, would you use if you were me? dd, tar, or a third option?

  Read the article

• Compatability error Installing Sharepoint w/ SP1 on Windows 2008 R2 RC

  - by Vaccano

  I am trying to install sharepoint 2007 enterprise with SP1 on Windows Server 2008 R2 RC 64 bit. I am getting a compatibility error. Here is the text: [Window Title] Program Compatibility Assistant [Main Instruction] This program is blocked due to compatibility issues [Expanded Information] You must install Office SharePoint Server 2007 - Please read Microsoft Knowledge Base article: 962935 with the most recent service pack. Office SharePoint Server 2007 - Please read Microsoft Knowledge Base article: 962935 without service packs has a known compatibility issue with this version of Windows. I can't find this KB article. I have the most recent SP installer available with my MSDN subscription. Any ideas?

  Read the article

• VirtualBox: Host OS processor is spiked while guest OS virtual processor is idle?

  - by Greg Mattes

  I'm running Windows XP 32-bit on Windows Vista 64-bit with VirtualBox 3.0.6. Whenever I run the XP VM, Vista (host) reports 100% cpu utilization even though XP (guest) reports between 1-5% cpu utilization. The host box has 2 GB of physical RAM. The guest/vm is configured with 512 MB. The host box has a 64-bit AMD processor. No apps (other than VirtualBox) are running on either host, they're just idling. Any guesses as to why the host processor is spiked? I've enabled various advanced features for the XP guest in the hopes of having better performance: Settings → System → Motherboard: Enable IO APIC Settings → System → Processor: Enable PAE/NX Settings → System → Acceleration: Enable VT-x/AMD-V and Enable Nesting Paging

  Read the article

• How to recreate missing Team Foundation Server database?

  - by Amadiere

  I've been trying out TFS 2010 Beta 2 on my local machine, or at least, had installed ready to do so. I had some issues with my MSSQL2008 server so I completely uninstalled and re-installed it and that sorted it. However, I'm now in limbo with TFS. I have the software installed, but it has none of the SQL databases installed that go with it. I had no data and am not precious about how to go about it. I figure completely uninstalling and re-installing might be an idea and will most likely fix it (repair didn't work). Is there a quicker way? Is there a command line utility that I can run, or a SQL script to recreate it all?

  Read the article

• Is there any way to stop or pause Windows fake-raid re-synching?

  - by haimg

  I have two physical disks, each one holds two volumes, they are Windows fake-RAID1. E.g.: Disk A: Partition1 Partition2 Disk B: Partition1-Mirror Partition2-Mirror After an unclean reboot, Windows started resynching these as expected. What was not expected, however, is that it started resynching both volumes at the same time. Both disks seek back and forth like crazy, and synching performance is horrible. Question: Is these any option to stop or pause synching of just one volume? I know I can put one of the disks offline, but that will stop synchronization of all volumes on that disk. Note: I have certain reasons why I need to torture myself with Windows RAID. I'm not interested in alternative RAID solutions right now.

  Read the article

• Concurrent backups in SQL Server?

  - by Mikey Cee

  We currently have our backups managed by a third party company. There are a bunch of agent jobs created that take full backups (4 times a day) and transaction log backups (4 times an hour). We now want to manage our backups in house, but don't want to disable the third party's jobs until we are sure that we have everything configured correctly internally So I am proposing to have a short period (say, a couple of days) where backups are being taken both by the old and the new system. I am wondering what the ramifications of having these two different systems both manage backups, and the potential pitfalls of having backups taken simultaneously. Is this even supported? If so, and bearing in mind that the system can cope with one backup without any noticeable performance degradation, is it fairly logical to assume that it should be able to cope with two simultaneous backups? Currently the load on the server is fairly light and it rarely struggles. Any advice is appreciated

  Read the article

• Windows detected a hard disk failure* - what should I do?

  - by bart

  I'm using Windows 7 x64 Ultimate, I'm getting windows error popups like this one for about 3 days, multiple times a day: This Samsung SpinPoint F3 HD502HJ 500 GB is about 2 years old and I already checked it with Samsung ES Tool 3.0, did all the scans (took hours) and everything is fine! I have no malware, viruses and this started to happen after I have had some electrcity issues at my house (multiple power surges / overvolatege during the night, PC was connected, but turned off), any ideas? What other test should I perform? I believe the disk could be damaged, but then diagnostic tools should prove this, right? *in fact "Windows detected hard disk problem" but I was unable to put word "problem" within the title as well.

  Read the article

• Using a Raspberry Pi as a VPN?

  - by sudo rm -rf

  So I'm sure many of you have heard of the new Raspberry Pi project. I was looking at messing around with Model B, which has the following relevant specs: Broadcom BCM2835 700MHz ARM1176JZFS processor with FPU and Videocore 4 GPU 256MB RAM Boots from SD card, running the Fedora version of Linux (ARM Version) 10/100 BaseT Ethernet socket USB 2.0 socket So I was curious if it would be possible to create a simple VPN out of this little machine. I do realize that since it's an ARM processor that might mess up quite a few things. Any ideas if this is possible? Just for what it's worth, this would be a personal project so I'm not worried about performance.

  Read the article

• Diagnosing high CPU waiting

  - by Will

  I have a monitoring server that is running icinga/collectd/graphite with about 50 hosts. I have noticed high load/slugging performance on the box. If you take a look at top, you'll see: Cpu(s): 0.6%us, 0.2%sy, 0.0%ni, 7.6%id, 23.4%wa, 0.0%hi, 0.2%si, 0.0%st Notice the HUGE %wa value, which as far as I know means a network or disk bottleneck. ifconfig shows no dropping packets and there's not a ton of bandwidth going on, so that leaves disk issues, right? There's not a lot of disk writing going on either...iotop is reporting we're only writing a little over 1 MB per second and the RAID tool reports everything is A-OK and write caching is enabled. How do I go about trying to figure out how to fix this? UPDATE: iostat -x output is: avg-cpu: %user %nice %system %iowait %steal %idle 0.62 0.10 0.31 9.65 0.00 89.31 Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 0.21 33.34 83.55 16.54 1599.94 399.07 19.97 43.21 416.98 3.71 37.13

  Read the article

• Run shell script on a command

  - by LinuxPenseur

  Hi, I want to run a shell script when date -s <string> command is used. For example i want to log the command to the file /tmp/user.log by executing the following command in the shell script logger -p user.notice "date -s command executed" -f /tmp/user.log How can run a shell script when date -s <string> is executed on the shell? To make it more general, I want to run my shell script when someone else issues a particular linux command on my system. How to do this?

  Read the article

• Best way to duplicate databases nightly?

  - by Margaret

  Hey all We just got two new servers, that are running Windows Server 2008. The intent is to make the machines pretty much identical, copying the content of the master to the slave on a nightly basis, so that if anything fails, the second copy can stand in immediately. It doesn't need to be up-to-the-minute mirroring, though I suppose that wouldn't hurt if performance is not affected. The two machines will, amongst other things, each be running an instance of SQL Server 2008. The aim is to duplicate the databases on the master down to the slave on a nightly basis. Unless I'm misunderstanding, the slave databases in mirrored databases require the primary to be present to work correctly; I'm hoping for some solution where we have a second machine that can be up and running with minimal downtime if the first one falls over. Am I misunderstanding mirroring? Is that the best way to do things, or should I use some other mechanism? If so, what?

  Read the article

• Keeping websites from knowing where I live

  - by D Connors

  This questions is related to issues and practicality, not security. I live in Brazil and, apparently, every single website I visit knows about it. Usually that's okay. But there are quite a few sites that don't make use of that information adequately. For instance: Bing keeps thinking that Brazilian pages are way more relevant to me than American ones (which they're not). google.com always redirects me to google.com.br Microsoft automatically sends me to horribly translated support pages in Portuguese (which would just be easier to read in English). These are just a few examples. Usually it's stuff I can live with (or work around), but some of them are just plain irritating. I have geolocation disabled in Firefox, so I guess they're either getting this information from my IP or from Windows itself (which I bought here). Is there a way to avoid this? Either tell them nothing or make them think I live somewhere else?

  Read the article

• What desktop chipsets support AMD's Rapid Virtualization Indexing?

  - by netvope

  Rapid Virtualization Indexing (RVI) is a hardware virtualization feature that can potentially give significant performance improvement. Intel's equivalent is Extended Page Tables. See http://en.wikipedia.org/wiki/Rapid_Virtualization_Indexing for more details. My question is: Does RVI require motherboard or chipset support? If yes, what desktop chipsets support it? I've ordered a Phenom II CPU (which supports RVI) but I haven't bought the motherboard. I'll install XenServer or VMware ESXi (which both support RVI) on the new computer.

  Read the article

• SMTP error 503 when sending mail with Windows Mail & Mobile Me:

  - by Marty Pitt

  I've started getting an error on my windows machine when sending an email through Windows Mail, using Mobile Me: An unknown error has occurred. Subject 'Test' Server Error: 503 Server Response: 503 5.7.0 TLS already in use. Server: 'smtp.me.com' Windows Live Mail Error ID: 0x800CCC65 Protocol: SMTP Port: 587 Secure(SSL): Yes I've checked and double-checked my credentials, and outbound mail settings, and they're correct. I've deleted and re-added the account, and I get the same issue. I'm able to receive email fine. Note - this issue only affects one PC - my laptop has no issues. Any suggestions on what Error 503 means, or how I would fix this?

  Read the article

• Is there a Linux-compatible R/C simulator that works with real radios?

  - by Norman Ramsey

  My Dad flies radio-controlled (R/C) aircraft. He used to run a simulator called "RealFlight" which allowed him to connect his actual radio to his computer and fly simulated craft. He learned enough to fly actual planes, but he wants to move up from "trainer" aircraft to higher-performance craft. After some crashes, he'd like to go back to the simulator for a while. The catch: he's given up Windows and is now running Ubuntu. Question: is there an R/C flight simulator that Runs on Ubuntu? Allows you to connect your radio and use it to control the simulator, preferably through a USB port?

  Read the article

• Certain web pages are suddenly not rendering properly in FireFox

  - by LeopardSkinPillBoxHat

  I am using FireFox 3.6.3. I noticed in the last couple of days that several webpages which I visit regularly are not rendering properly. A lot of the text is overlapping with other text and it basically looks like the style sheet is completely screwed up. I have tried disabling all of my Add-Ons and it doesn't make a difference. When I use Coral IE Tab to render the pages using IE they display without any problems. The websites which are not rending properly for me are: The Age Google Reader One interesting thing I noticed is that if I modify the Google Reader URL to not use SSL (i.e. change https to http) it renders without any issues. However, The Age website is not using SSL, and that still doesn't render properly. I have also disabled my Proxy Server (I normally use one at work) but this doesn't make a difference either.

  Read the article

• Foward slash in kibana 3 query

  - by G Mawr

  I'm trying to add a query that will match a request that ends with a slash, like this one: n.n.n.n - - [16/Oct/2013:16:40:41 +0100] "GET / HTTP/1.1" 200 25058 "-" "Mozilla/5.0 (iPad; CPU OS 7_0_2 like Mac OS X) AppleWebKit/537.51.1 (KHTML, like Gecko) Version/7.0 Mobile/11A501 Safari/9537.53" I'm using the Lucene query type. If my query is set to *, I see the event. If I set it to request:"css", I see CSS requests, as expected. However, all of the following yield no results: request:"/" request:"\/" request:"\\/" I tried a Lucene regular expression, with no luck: request:/\// I note that someone else is getting what appears to be a similar issue, although that's on Kibana 2: https://github.com/rashidkpc/Kibana/issues/401 How can I query for requests that end with a / character?

  Read the article

• Eclipse Juno failing to start with Java returning 1 error report

  - by Richard Lewin

  I have been using Eclipse Juno on windows 8 without any issues until yesterday when, upon starting Eclipse it shows the initial splash screen and then shows the following message: Eclipse Java was started but returned exit code=1 C:\Windows\system32\javaw.exe -Dosgi.requiredJavaVersion=1.5 -Dhelp.lucene.tokenizer=standard -Xms40m -Xmx384m -XX:MaxPermSize=256m -jar C:\Program Files\eclipse\plugins/org.eclipse.equinox.launcher_1.3.0.v20120522-1813.jar -os win32 -ws win32 -arch x86_64 -showsplash C:\Program Files\eclipse\plugins\org.eclipse.platform_4.2.0.v201206081400\splash.bmp -launcher C:\Program Files\eclipse\eclipse.exe -name Eclipse --launcher.library C:\Program Files\eclipse\plugins/org.eclipse.equinox.launcher.win32.win32.x86_64_1.1.200.v20120522-1813\eclipse_1503.dll -startup C:\Program Files\eclipse\plugins/org.eclipse.equinox.launcher_1.3.0.v20120522-1813.jar --launcher.overrideVmargs -exitdata 13f4_5c -product org.eclipse.epp.package.java.product -vm C:\Windows\system32\javaw.exe -vmargs -Dosgi.requiredJavaVersion=1.5 -Dhelp.lucene.tokenizer=standard -Xms40m -Xmx384m -XX:MaxPermSize=256m -jar C:\Program Files\eclipse\plugins/org.eclipse.equinox.launcher_1.3.0.v20120522-1813.jar OK At this point Eclipse does not load any further. I have attempted to re-install the Java JDK and JRE without having any effect. I have also re-downloaded Eclipse Juno and run it as a 'fresh' startup which has until now worked initially yesterday

  Read the article

< Previous Page | 526 527 528 529 530 531 532 533 534 535 536 537  | Next Page >