Search Results

Search found 30524 results on 1221 pages for 'display errors'.

Page 533/1221 | < Previous Page | 529 530 531 532 533 534 535 536 537 538 539 540  | Next Page >

  • Source of Unexplained Requests in Server Logs

    - by Synetech inc.
    Hi, I am baffled by some entries in my server logs, specifically the web-server logs. Other than normal, expected traffic, I have noticed three types of request errors (eg 404, etc.): Broken links, ie links from old, external pages that point to pages that are no longer here Sequences of probes, ie some jerk trying to hack in by scanning my server for a series of exploitable admin type pages and such What appear to be completely random requests for things that have never existed on the server or even have anything to do with the server, and appear by themselves (ie not a series of requests like the probes) Could it somehow be a mistyped URL or IP? That’s about the only thing that I can think of, but still, how could I get a request on say, foobar.dyndns.org (12.34.56.78) for something like www.wantsfly.com/prx2.php or /MNG/LIVE or http://ant.dsabuse.com/abc.php?auth=45V456b09m&strPassword=X%5BMTR__CBZ%40VA&nLoginId=43. (Those are a few actual requests from my logs.) Can someone please explain scenario three to me? Thanks.

    Read the article

  • data protector red tapes

    - by Caesar
    I am using HP Data Protector A.06.11 in my organization, with HP EML E-SeriesEML library, with 4 drives using LTO-4 tapes, and i am having some problems. Yesterday I put 5 new tapes in the robot and formatted them. At that time, the robot got just those empty 5 tapes with empty space. (all the rest of the tapes are red, or with protection) Today in the morning after the night (1 backup run at night), and 2 of the new tapes are red (the properties are): Writes : 2 Overwrites : 1 Errors : 9 I format one of them, and check for each drive if the tape become red, no one of the drives do it. In the main pool properties, in media condition got: Valid for : 36 (months) Maximum overwrites : 250

    Read the article

  • How IBM Implement WebSphere Application Server SDK for Sun Solaris OS

    - by Eng Al-Rawabdeh
    I deploy the same application in IBM-WAS on different OS ( Windows , AIX and SUN-Solaris ) , SDK errors appeared on SDK for just Solaris OS , I refer some sites and it talk that the SDK on Solaris OS was build based on Sun SDK is it write ? so please I need to now if the IBM build the Solaris SDK from scratch or based on sun SDK ?? More Details : I Installed the same IBM WAS Application Server on two servers as the following : 1- Server1 - OS (AIX) 2- Server2 - OS ( Solaris) these two server on the same network and have the same configuration . Then I deploy Java Application ( X ) on both servers , the Application X was run on Server1 ( AIX ) without any problem but when I run the Application on Server 2 ( Solaris OS) I faced SDK issue . So I need to know what the difference between AIX WAS SDK and Solaris WAS SDK ?? Note : I try windows and it was run without any problem .

    Read the article

  • Handling FreeBSD package upgrades using pkg_add

    - by larsks
    I'm trying to use FreeBSD's pkg_add command to install and upgrade binary packages in a build-once-install-on-multiple-machines sort of scenario. It works well when installing a new package, but upgrades are baffling me. For example, if I want to upgrade a package that is depended on by another package, I can't just install it: # pkg_add /path/to/somepackage-2.0.tbz pkg_add: package 'somepackage' or its older version already installed At this point, I can delete the older version of the package if I pass -f to the pkg_delete command: # pkg_delete -f somepackage-1.0 pkg_delete: package 'somepackage-1.0' is required by these other packages and may not be deinstalled (but I'll delete it anyway): anotherpackage-1.0 But...and this is the killer...now the dependency information is gone! I can install the upgrade: # pkg_add /path/to/somepackage-2.0.tbz And now attempts to delete it will succeed without any errors: # pkg_delete somepackage-2.0 How do I handle this gracefully (whereby "gracefully" means "in a fashion that preserves dependency information without requiring me to rebuild/reinstall and entire dependency chain"). Thanks!

    Read the article

  • Kill xserver from command line (init 3/5 does not work)

    - by John Smith
    Hi, I'm running Linux Mint 10, although I've had this same issue with other variants of Linux. I've been told/found while researching that if the X server hangs or otherwise errors, one can drop to a root prompt, usually at another tty, and execute init 3 (to drop to single user mode) and then init 5 to return to the default, graphical session. Needless to say, I've tried this before in multiple configurations on multiple machines to no avail. The only feedback I receive form executing those two commands is a listing of VMWare services (from a kernel module) that are stopped and then restarted. Note: If I run startx (either before or after init 3), then I am told that the xserver is still running and that I should remove /tmp/.X0-lock. Having tried that, it removes that error message, but claims that the xserver cannot be attached as another instance is running. How do I kill the xserver completely? Can I killall some process name?

    Read the article

  • Installing a new SQL Server instance fails

    - by Rubio
    I've previously in my setup installed SQL Server Express 2005. Now I've switched to SQL Server Express 2008. I updated the command line parameters to those documented for the latter. If the comp already has SQL Server Express 2008 installed, my installer should create a new instance. The command line parameters are as follows: /ACTION=Install /FEATURES=SQLEngine /QS /INSTANCENAME=ABCD /SECURITYMODE=SQL /SAPWD=CunningPassword The requested instance name does not exist on the target machine. This will end in an error -2068643838. The logs show the following error: "No features were installed during the setup execution. The requested features may already be installed." If I remove the /QS parameter and try to install interactively, I'll get as far as the Feature Selection page. The UI shows three options, Instance Features, Shared Features and Redistributable Features. Whatever I select, clicking Next results in the same error (There are validation errors on this page). Any ideas anyone?

    Read the article

  • "Bad response to Storage command" when scheduling job with Bacula

    - by Joril
    I have a Bacula setup with 9 clients, and it's working happily. Today I had to add another client, so I went and copied+adapted the existing configuration files from another client, but when I schedule a job for the new client, I get these errors: 20-Mar 17:50 tools-dir JobId 39: Start Backup JobId 39, Job=BackupPresenze2.2012-03-20_17.50.49_04 20-Mar 17:50 tools-dir JobId 39: Using Device "FileStorage" 20-Mar 17:50 presenze2-fd JobId 39: Fatal error: Failed to connect to Storage daemon: bacula.mylan.local:9103 20-Mar 17:50 tools-dir JobId 39: Fatal error: Bad response to Storage command: wanted 2000 OK storage , got 2902 Bad storage From the client I can telnet to bacula.mylan.local:9103 just fine, and jobs for other clients work successfully... What could I check? (Server and client run Ubuntu 10.04, if it's relevant)

    Read the article

  • I need to access another user's files.

    - by CDeanMartin
    My system is an HP netbook running Ubuntu 10 netbook edition from a USB drive. I created an admin account and user account, and left in place the 'ubuntu' account. My netbook came with Windows 7 factory loaded and I did some work in Windows before setting up Linux. I copied my work into the HP Tools FAT32 partition that also came Factory Loaded, and was only 20% full. Only the 'ubuntu' account shows the HP Tools partition. So I would like to either view the partition from the 'admin' or 'user' accounts, or copy files from the partition-to a folder accessible from admin or user. I have already tried right clicking the folder, selecting share, and installing the share package, but I got a string of errors and would prefer a short term, one time solution that does not involve installing the share package. All I need is a few plain text Windows files i was working on.

    Read the article

  • Nginx & Apache Cannot get try_files to work with permalinks

    - by tcherokee
    I have been working on this for the past two weeks not and for some reason I cannot seem to get nginx's try_files to work with my wordpress permalinks. I am hoping someone will be able to tell me where I am going wrong and also hopefully tell me if I made any major errors with my configurations as well (I am an nginx newbie... but learning :) ). Here are my Configuration files nginx.conf user www-data; worker_processes 4; pid /var/run/nginx.pid; events { worker_connections 768; # multi_accept on; } http { ## # Basic Settings ## sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 65; types_hash_max_size 2048; # server_tokens off; # server_names_hash_bucket_size 64; # server_name_in_redirect off; include /etc/nginx/mime.types; default_type application/octet-stream; ## # Logging Settings ## # Defines the cache log format, cache log location # and the main access log location. log_format cache '***$time_local ' '$upstream_cache_status ' 'Cache-Control: $upstream_http_cache_control ' 'Expires: $upstream_http_expires ' '$host ' '"$request" ($status) ' '"$http_user_agent" ' ; access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } mydomain.com.conf server { listen 123.456.78.901:80; # IP goes here. server_name www.mydomain.com mydomain.com; #root /var/www/mydomain.com/prod; index index.php; ## mydomain.com -> www.mydomain.com (301 - Permanent) if ($host !~* ^(www|dev)) { rewrite ^/(.*)$ $scheme://www.$host/$1 permanent; } # Add trailing slash to */wp-admin requests. rewrite /wp-admin$ $scheme://$host$uri/ permanent; # All media (including uploaded) is under wp-content/ so # instead of caching the response from apache, we're just # going to use nginx to serve directly from there. location ~* ^/(wp-content|wp-includes)/(.*)\.(jpg|png|gif|jpeg|css|js|m$ root /var/www/mydomain.com/prod; } # Don't cache these pages. location ~* ^/(wp-admin|wp-login.php) { proxy_pass http://backend; } location / { if ($http_cookie ~* "wordpress_logged_in_[^=]*=([^%]+)%7C") { set $do_not_cache 1; } proxy_cache_key "$scheme://$host$request_uri $do_not_cache"; proxy_cache main; proxy_pass http://backend; proxy_cache_valid 30m; # 200, 301 and 302 will be cached. # Fallback to stale cache on certain errors. # 503 is deliberately missing, if we're down for maintenance # we want the page to display. #try_files $uri $uri/ /index.php?q=$uri$args; #try_files $uri =404; proxy_cache_use_stale error timeout invalid_header http_500 http_502 http_504 http_404; } # Cache purge URL - works in tandem with WP plugin. # location ~ /purge(/.*) { # proxy_cache_purge main "$scheme://$host$1"; # } # No access to .htaccess files. location ~ /\.ht { deny all; } } # End server gzip.conf # Gzip Configuration. gzip on; gzip_disable msie6; gzip_static on; gzip_comp_level 4; gzip_proxied any; gzip_types text/plain text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript; proxy.conf # Set proxy headers for the passthrough proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_max_temp_file_size 0; client_max_body_size 10m; client_body_buffer_size 128k; proxy_connect_timeout 90; proxy_send_timeout 90; proxy_read_timeout 90; proxy_buffer_size 4k; proxy_buffers 4 32k; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; add_header X-Cache-Status $upstream_cache_status; backend.conf upstream backend { # Defines backends. # Extracting here makes it easier to load balance # in the future. Needs to be specific IP as Plesk # doesn't have Apache listening on localhost. ip_hash; server 127.0.0.1:8001; # IP goes here. } cache.conf # Proxy cache and temp configuration. proxy_cache_path /var/www/nginx_cache levels=1:2 keys_zone=main:10m max_size=1g inactive=30m; proxy_temp_path /var/www/nginx_temp; proxy_cache_key "$scheme://$host$request_uri"; proxy_redirect off; # Cache different return codes for different lengths of time # We cached normal pages for 10 minutes proxy_cache_valid 200 302 10m; proxy_cache_valid 404 1m; The two commented out try_files in location \ of the mydomain config files are the ones I tried. This error I found in the error log can be found below. ...rewrite or internal redirection cycle while internally redirecting to "/index.php" Thanks in advance

    Read the article

  • Determining Namespaces Not in the ACPI Spec

    - by Eddie B
    I am trying to determine how it may be possible to find documentation for namespaces that are not documented in the ACPI spec. I have an Asus uEFI BIOS v(3202) and I'm receiving kernel messages stating AE Namespace lookup failures for DSSP. This is referring to a namespace that is not in the ACPI spec. I'm presuming that this is vendor specific and refers to a Digital Sensor Signal Processor. That is only a presumption. In an effort to correct ACPI errors I have dumped my DSDT using acpidump and then decompiled it using iASL. Yet to fix the error I need to know the spec on the namespace. How can I get access to the BIOS documentation that isn't part of the ACPI spec?

    Read the article

  • What causes Windows Boot to stall?

    - by Nick Berardi
    For about 6 months now I have been having this weird problem where Windows 7 fails to fully boot correctly. What happens is this. Starting Windows shows up on the screen. Then 3 out of 4 times nothing else happens, no Windows Flag animation, just nothing occurs. After 3 or 4 restarts repeating steps 1-2 above, the Windows Flag animation finally shows up and everything works as expected. My question is what is causing this problem in steps 1 and 2? Because I have tried the following with no luck: Error checking and correcting of any disk errors Updating drivers Doing a clean install of Windows 7 My setup is as follows: Windows 7 64-bit Ultimate 8 GB RAM 128 GB Crucial SSD (firmware 0005) Dell Latitude E6410 Intel Wireless and Graphics Other than what I have tried above I am totally out of ideas and looking for some new ones to try.

    Read the article

  • Modifying the initrd.img to run additional binaries in a PXE booted RHEL 6

    - by Charles Long
    I am trying to add additional automation to our existing RHEL 6 (or Oralce's implementation thereof) PXE install process by running a script in the %pre section of my kickstart config that call hpacucli, HP's raid device configuration binary. My approach has been to modify the PXE served initrd.img. I've unpacked the initrd.img and copied in the required libraries, binaries, and scripts but when the system boots using the modified initrd.img, the modified /lib (and /lib_64) are moved aside to /lib_old and /lib is linked to the /mnt/runtime/lib. How can I change this configuration so that the /lib is not moved (unlikely) or required libraries are available in the runtime /mnt/runtime/lib? To test and confirm this I've been able to get the install process to move to the 6th virtual console, which allows me to see errors, and then open a shell (a useful debugging mechanism). %pre exec /dev/tty6 2 /dev/tty6 chvt 6 /bin/sh

    Read the article

  • How can I stop Windows DNS server properties settings from changing by themselves?

    - by paradroid
    When I open the DNS console in Administrative tools, I keep finding a couple of problems which keep on reappearing by themselves, and I want to stop them from happening. One of the DNS servers has two network interfaces, and it should only be listening for requests on of them, and I get errors in the Event Log otherwise. But when right clicking one DNS server and selecting Properties, I can see on the Interfaces tab that 'All IP addresses' is selected. If I Change it to 'Only the following IP addresses:' and deleselect the WAN addess, I will find it reslected when I next check it after a couple of days. In the other DNS server's Properties, on the Forwarders tab, there should only be two forwarder addresses. However, the address for the router keeps in appearing. This router has the DNS server as its forwarder. There shouldn't be anything using the router's DNS forwarders for DNS other than the router itself, but this surely is causing a loop. How do I get these properties on both DNS servers to stick?

    Read the article

  • How to Disable secondary drive from booting upon restart - Windows

    - by DevCompany
    I had a Windows 2003 Hard Drive on my server and it went bad so I installed a new clean hard drive and installed Windows 2008 R2 on the new clean drive. I moved the old 2003 drive to be used only for general storage on the same computer. It usually boots into Windows 2008 upon a restart, but just sometimes it starts trying to boot the old 2003 drive and causes boot issues(NTDLR Bootloader, and other errors), even though the order of boot preference is set to boot 2008, and NOT 2003. I need to know how to remove any old code that keeps this old drive as a bootable drive. I still want to use it as a secondary drive just dont want to have any boot code on it. hopefully my situation is clear for everyone to get a good response. Thank you...

    Read the article

  • Laptop connects to other network but not to my home wireless

    - by Nilesh
    My home network's wireless SSID is say "XYZ" I also have an ethernet wire from the same router. I have two laptops A and B Earlier both A and B were able to connect to my home internet through the ethernet and wireless. Suddenly, the laptop B can no longer connect to XYZ or through ethernet. When I do plug the wire, i get the connection icon all green but when I try to access any web page it errors out (page not found) But strangely laptop B connects to my neighbours wireless SSID "ABC". I have also tested laptop B with other networks and it connects fine. Laptop A and many other devices still connect fine with my home wireless "XYZ" Strange thing is when my laptop B connects wireless through XYz, it gets the IP address but then none of the browsers (chrome,firefox, IE) can show any web pages. What settings should I be checking on laptop B that is preventing it to connect to my home internet. Thank you

    Read the article

  • Munin Aggregate Graphs from several servers

    - by Sparsh Gupta
    I am using DNS round robin load balancing and have divided my total traffic onto multiple servers. Each server does around 300-400req/second but I am interested in having an aggregate graph telling me the TOTAL of all requests per second served by our architecture. Is there any way I can do this. Right now each graph in Munin comes as a separate graph as they depict things on one server. I am using configuration as follow which doesn't work doesnt work for me, does this configuration got errors? [TRAFFIC.AGGREGATED] update no requests.graph_title nGinx requests requests.graph_vlabel nGinx requests per second requests.draw LINE2 requests.graph_args --base 1000 requests.graph_category nginx requests.label req/sec requests.type DERIVE requests.min 0 requests.graph_order output requests.output.sum \ lb1.visualwebsiteoptimizer.com:nginx_request_lb1.visualwebsiteoptimizer.com_request.request \ lb3.visualwebsiteoptimizer.com:nginx_request_lb2.visualwebsiteoptimizer.com_request.request \ lb3.visualwebsiteoptimizer.com:nginx_request_lb3.visualwebsiteoptimizer.com_request.request

    Read the article

  • how to change interface ip in ifconfig with /etc/network/interfaces

    - by user2478348
    Hi everybody when modifiying /etc/network/interfaces, saving it and then executing ifconfig i can't see the modification i made..for example here is part of my /etc/network/interfaces: auto wlan1 iface wlan1 inet static address 192.168.0.60 netmask 255.255.255.0 gateway 192.168.0.61 you can see that the IP address of my wlan1 is 192.168.0.60 but when typing ifconfig i have this: wlan1 Link encap:Ethernet HWaddr 00:19:70:0f:c2:9c inet adr:192.168.0.1 Bcast:192.168.0.255 Masque:255.255.255.0 adr inet6: fe80::219:70ff:fe0f:c29c/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Packets reçus:758 erreurs:0 :0 overruns:0 frame:0 TX packets:610 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 Octets reçus:73490 (73.4 KB) Octets transmis:127883 (127.8 KB) (the inet adr:192.168.0.1 and not 198.168.0.60)..if someone can help me I'll be very thankful :)

    Read the article

  • Reliability of S.M.A.R.T.?

    - by Mark
    I've been using ActiveSmart to monitor my hard-drives health for a few weeks now, and its telling me my brand new 1.5 TB hard-drive is half-dead already. About on-par with one of my hard-drives which I know is at least half dead because I've been having some read errors and heard ticking noises. Now I haven't actually noticed any problems with my 1.5 TB drive; should I be concerned that it's going to crap out on me too? Or could ActiveSmart be giving a mis-diagnosis because I use it a lot or something (I've used up 795 GB in the 2 and a half weeks I've had it). The events that ActiveSmart has been catching is "Hardware ECC recovered". Maybe these new fangled super big hard-drives somehow rely on ECCs to squeeze out the extra space, but this isn't actually a cause for concern?

    Read the article

  • auspex LFS backups

    - by user1250465
    I have some backup tapes which existed on an AUSPEX file server. The backups were written to tape with the SunOs version of the CPIO command. Now that I need to restore them, (of course there are no more auspex servers in existance), the backups won't restore because the headers are not standard. I have dumped the tape images to disk. PAX, CPIO, and TAR cannot read the images. I've tried all of the CPIO format options. The errors I get are "name too long", "byte swapped in header", or just junk output. I can open up the images and read the contents of the files, but cannot restore the images. I have found that SunOs had a special header in CPIO V2.5 images. I have found the source for cpio, now I need definition of the SunOs header inside CPIO?

    Read the article

  • Server 2003 answers ping, but wont serve http, ftp,smtp or pop3

    - by Manfred
    After reboot, my server wont respond to any incoming request until it is rebooted again. Then, about 5-6 hrs later, any website on it will return a ping, but it will not serve the page, nor will it serve ftp, pop3 or smtp requests. The System log shows W3SVC errors 1014 and 1074, which relate to an Application pool not replying; I have one phpAdmin app pool which I have stopped - it is showing a solitary website as the default App, but the server no longer serves php extensions, and I can't transfer the default website to another pool to kill the whole app pool. I would appreciate your help.

    Read the article

  • Installing ruby 1.9.1 on OS X with RVM, getting error I can't make sense of

    - by Pselus
    I'm trying to update my ruby install on Leopard to at least 1.9.1. I found a tutorial that tells me how to do it with RVM and I get as far as downloading, configuring and compiling the version I want, but during the compile I get errors. When checking the make.error.log file this is the message I get: [2010-11-07 13:43:44] make main.c: In function ‘objcdummyfunction’: main.c:19: warning: implicit declaration of function ‘objc_msgSend’ main.c: At top level: main.c:19: warning: ‘objcdummyfunction’ defined but not used eval.c: In function ‘ruby_cleanup’: eval.c:139: warning: passing argument 1 of ‘ruby_init_stack’ discards qualifiers from pointer target type gc.c: In function ‘garbage_collect_with_gvl’: gc.c:597: warning: cast from pointer to integer of different size w: illegal option -- L usage: w [hi] [user ...] make: [libruby.1.9.1.dylib] Error 1 (ignored) readline.c: In function ‘username_completion_proc_call’: readline.c:1159: error: ‘username_completion_function’ undeclared (first use in this function) readline.c:1159: error: (Each undeclared identifier is reported only once readline.c:1159: error: for each function it appears in.) make[1]: *** [readline.o] Error 1 make: *** [mkmain.sh] Error 1 I have no idea what any of that means. Help?

    Read the article

  • Windows 7 has trouble installing software with Visual C++ 2005 & 2008

    - by John Fitzgerald
    I have been reinstalling Windows 7 over and over again on an ASUS P5lD2 2Gb Ram 3Ghz P4 because it ultimately loses the contents of "Turn Windows Features On or Off" after I install software like Autocad 2010 & Microsoft Office 2007. I get install errors like 1935 and 1704 on the way tried different fixes at different times (install software in different order to try and isolate problem too). Ultimately I force the software to install after much buggering and end up losing the contents of "TWFOOO" Should I be installing some older items like .net framework 1.1, 2.0 and Visual Studio items like vcredist_x86.exe? getting a bit lost because of compounded problems...

    Read the article

  • Replacing old SSL cert with a new one with IIS

    - by Wookie321
    I purchased a new cert for my web server (GoDaddy) rather than renewed the current one. In the IIS manager, whenever I do the "Complete certificate request..." and then add my new cert it seems to accept it fine, but when I go off this screen and go back, the cert isn't there? I haven't seen any errors, but I thought it might be because I'm adding a cert with the same friendly name as the old one. I don't want to remove the old cert quite yet, is there a way around this?

    Read the article

  • What is the simplest way to interpolate and lookup in an x,y table in excel?

    - by dassouki
    I would like to do a lookup and interpolation based on x, y data for the following table. I'd like the equation to be as simple as possible to reduce the amount of possible errors. The full table is about 50 rows x 30 columns. I have about 20 of those tables. Here is an extract from one: A B C D 1 0.1 0.2 0.3 2 2.4 450 300 50 3 2.3 500 375 52 4 2.1 550 475 55 5 1.8 600 600 60 For example, the equation should find the value for x = 2.27 and y = 0.15

    Read the article

  • Windows 7 Recurring Blue Screens: MEMORY_MANAGEMENT 0x1A

    - by Chris C.
    I have recurring BSODs that really have me scratching my head. Here's a look at the errors: MEMORY_MANAGEMENT 0x1A (ntoskrnl.exe) - I've seen this 9 times since April 2012 NTFS_FILE_SYSTEM 0x24 (Ntfs.sys) - this one's new, happend 4 days ago BAD_POOL_HEADER 0x19 (win32k.sys) - also new, happened 7 days ago My system specs: Intel Core i5 2500K @ 3.30GHz ASUS Sabertooth P67 Motherboard (Rev 2) * RMA'd my Rev 1 due to recall 16GB (4 x 4GB) Kingston HyperX 1600 MHz DDR3 RAM 2 x 640GB Western Digital Caviar Black 64MB SATA HDD EVGA NVIDIA GeForce GTS450 1GB PCI-E 2.0 Graphics Card I've got Windows 7 Home Premium and it's completely patched. I'm also running Microsoft Security Essentials, which is up-to-date and always present. I've run MemTest86+ from a USB drive for up to nine hours, giving my RAM a total of 6 passes, and it didn't detect a single error. I've used chkdsk in Windows 7 to scan the C:/ drive on boot (twice) and it found no problems. How can I find out what's causing all these blue screens?

    Read the article

< Previous Page | 529 530 531 532 533 534 535 536 537 538 539 540  | Next Page >