Search Results

Search found 22065 results on 883 pages for 'performance testing'.

Page 533/883 | < Previous Page | 529 530 531 532 533 534 535 536 537 538 539 540  | Next Page >

• How to increase hard drive transfer speed

  - by atif089

  This is my motherboard GA-M61PME-S2 (SATA upto 3.0 Gbps) and This is my Hard Disk Samsung hd502hi Capacity 500 GB Cache 16MB Disks / Heads 1 / 2 Interface SATA 3Gb/s Spindle Speed 5400 RPM Sustained Data Rate OD 100 MB/s Average Seek 8.9 ms Average Latency 5.56 ms Data Transfer Rate 300 MB/sec Weight 470 grams Power: Idle / Seek / R-W / Spin-up 3.9W / 4.8W / 5.1W / ~24W Acoustics (sound power) 2.2 / 2.7 Bel (idle / quiet seek / performance seek) When I copy things from one partition to another they transfer at a maximum of 30 MBps. However the drive supports upto 300 MBps right ? How do I increase the transfer speeds? P.S - Using Windows XP, All partitions are NTFS.

  Read the article

• setting up a WGR614v7 behind a linux box

  - by commodore fancypants

  Here's the setup, I have an openSUSE box with 2 NICs, one goes to my home network router, the other has DHCP running and it attached to a wireless router. I'm trying to get this setup to work before I switch to the linux box as my home network router. My DHCP will offer the wireless router (a WGR614v7) an address, but anything that connects to the wireless router ends up with a APIPA address. I have all the firewalls on the wireless network turned off as well as the wireless router's own DHCP. The linux box isn't offering addresses to anything past the wireless router. Is this a problem with the router or my DHCP setup? For testing purposes, I have both NICs set in the internal zone and I've tried wireless and wired connections to the WGR614v7 both to no avail.

  Read the article

• Sync a specific folder of contacts to iPhone

  - by colemanm

  Is there a simple way to organize contacts in Outlook/Entourage and only have a subset of them synchronize with the iPhone over Exchange ActiveSync? Our CEO has thousands of contacts in his mailbox, but would prefer if only a small portion of them synched to his phone over the air... The iPhone's performance takes a huge hit keeping that massive dataset in order. If he could put some of the records in subfolders or something and only sync the top level, I think that would work for him. Does anyone know if this is possible?

  Read the article

• What are the benefits of full VDI over Remote Desktop Services?

  - by Doug Chase

  We're talking about piloting VDI here, but the more research I do, the more it seems like it would make more sense just to upgrade and expand our TS (RDS) environment. I feel like you can pull off more sessions per core on RDS than on any VDI solution I've looked at. Is this the case? Is there a decision matrix anywhere describing the benefits of using full virtualized desktops over using a remote desktop farm? We need good video performance for clinical imaging - will this work better on one infrastructure or the other? (Does this question have a specific enough answer for it to be on SF? Regardless, I feel like having this here will be helpful for someone in the future...)

  Read the article

• How to install OpenOffice 3.1 in Headless Mode?

  - by Geo

  I need to setup OpenOffice in a linux box that will never have X installed. Every time I run the setup program of the OpenOffice installer it complains that the system does not have an X Terminal. I am using OOo_3.1.0_LinuxIntel_install_wJRE_en-US.tar. I have done this headless install for version 2.4, but we are having some performance issues and we will like to test the 3.1 version. The rpm -i *rpm does not work, since it is also looking for libgnome inside it. We are trying to install the system in a CenOS 5.1. Any ideas are welcome?

  Read the article

• Windows / Apache / PHP CPU at 100% under small load

  - by Bart

  I have a Windows box loaded with Apache 2.2 and PHP 5.2. It runs great if only a few users are on it at a time, but under load testing (50 users for test #1), the CPU climbs up to 100%. Nearly all of this CPU usage comes from httpd.exe. I currently have PHP set up via php5_module, but one of the first things I plan to try next is to use FastCGI instead. Is FastCGI better at handling multiple connections? Any other ideas on what might be causing Apache to run so high?

  Read the article

• Remotely push DNS server to client via OpenVPN

  - by wishi

  Hi! When I try to push a DNS server via the OpenVPN server-config I don't get that server to be the first DNS server on the connected client system. It ends up being specified as an alternative DNS server. push "dhcp-option DNS 89.238.75.146" # DNS-Server 1 (local djbdns) To overcome certain network restrictions, if they're at place, I use 443 TCP. - That means that my DNS queries are sent via TCP (if I manually reconfigure the DNS server), which doesn't scale very well from a performance perspective. Are there any kewl solutions for that? Marius

  Read the article

• PXE boot very slow when PXE server is virtualbox

  - by sqrtsben

  As I read in questions here and on the Internet, PXE and Virtualbox don't seem to like each other too much. My problem is the following: I have a virtualized machine which hosts the DHCP and PXE server for 10 native clients. They are rebooted roughly every 10 mins and on each reboot, they need to boot a small linux (the initrd is ~4MB). Before, I had a native machine running and booting via PXE was very fast. Now, looking at the output of nload, I only get 500kbit/s whenever one machine is booting. The machines are connected via a GBit switch, so that can't be it. Also, when testing the connection speed to the outside, I have the full bandwidth available. Is VBox just unable to deal with large amounts of UDP packets? Can anyone point me in the right direction here?

  Read the article

• mini linux to use dd and access HD and/or USB

  - by acidzombie24

  I was thinking about something. I want to install a 7gb partition and store 2 compress disk image and install linux to it. I want it to be light. What i would like to do is hide the grub loader (or anything) and if i want to reformat my PC press a certain key on startup. Which will then load the linux OS and then i can use dd to restore the partition i want I plan to use windows XP and windows 7 as my main OS and virtualize anything else i need (vista, dummy XP for testing, multiple linux distos, etc). Bonus points if you can tell me how to hide the partition in windows so XP and 7 cant touch it

  Read the article

• MySQL replication hung after slave goes offline and comes back online again

  - by Ed Manet

  I have a master server and several slave servers replicating a single database. I am using in MySQL 5.0 in SLES 11. During fault tolerance testing I found that when the slave's network connection is broken (cable un-plugged) and then restored, replication hangs. It shows no errors and the slave appears to be running but the Read_Master_Log_Pos and Exec_Master_Log_Pos values do not match the log postion on the master server. The Slave_IO_State is "Waiting for master to send event". The Slave_IO_Running and Slave_SQL_Running values are both are "Yes". The Master_Log_File and Relay_Master_Log_File match. If I stop and start the slave or restart the mysql daemon, replication starts working again. Any ideas on what I can do about this?

  Read the article

• Laptop as server [closed]

  - by Parhs

  My client wants to use a cheap AMD E-300 ,5400 rpm disk,4gb memory laptop as a POS server and music player at the same time with dual screen. I couldnt convince him that this wouldnt be a good choice. The applications are a database a music player ,and the .net 4 application. I am afraid of performance issues. However the reasons for this choice is that laptop takes not much space ,easy dual screen for music player and application ,can easilly be replaced and that it will last forever as none of his laptops are ever broken. I believe that this is a good idea but i feel thats something wrong there. Do you believe that is an ok choice?

  Read the article

• No win 7 users available for login after dell datasafe factory reset

  - by user897052

  I created install discs using the Dell datasafe 2.0 backup utility in order to re-install windows on a friend's laptop (dell inspiron n5110). I ran the discs to do a factory reset. after the whole process, it booted, started loading windows 7, displayed the messages "setup is preparing your computer for first use" and "setup is checking video performance," and showed the login screen. However, there don't seem to be any active users on the machine - I opened a command prompt window to check the users on the machine. Using the command prompt (again, from the login window), i activated/enabled the administrator account, and even created another admin account, and upon logging in received several errors, couldn't load any mmc's, etc. any help would be appreciated.

  Read the article

• SElinux stopping LVS from working with https

  - by J Hoskins

  LVS/piranha is setup and trying to get it to balance https instead of http. Setup https testing with wget - idea from this link. Works when I do it at the command prompt. With SELinux enforcing, the wget fails to run due to the lack of access to /dev/random. (Error - Could not seed PRNG; consider using --random-file. Disabling SSL due to encountered errors.) wget runs as system_u:system_r:piranha_lvs_t:s0 but the file/device /dev/random has system_u:object_r:random_device_t:s0 Also, wget is trying to getattr and read. How do you allow wget to use /dev/random so it will do ssl?

  Read the article

• Hardware Raid Card Reviews with SSDs

  - by Nalandial

  Yes I realize there are several questions about this but none of them seem to have the answer I'm looking for. I have two SSDs and am looking to buy a purely hardware raid card for them; however, I can't seem to find any reviews that have specifically tested hardware raid cards with SSDs rather than testing the SSDs themselves. I'm looking for a review because I'm assuming that for example: 100% gain with two 7200rpm drives doesn't necessarily mean 100% gain with a pair of SSDs, since there would be higher speeds, meaning more throughput, meaning more processor/memory usage for the card. If this assumption is wrong then that's fantastic; however if it's true, I am quite sad and would really appreciate any advice or reviews you can find. Thanks in advance!

  Read the article

• What effect does RAID stripe size have on read-ahead settings?

  - by stbrody

  I'm trying to figure out the correct read-ahead values to set on a RAID10 array, and I'm wondering if the RAID stripe size should factor into my considerations. I've heard conflicting information about this in the past. I once heard that you should always set your read-ahead value to a multiple of the RAID stripe size, and never below the stripe size, because that is the minimum amount of data the RAID controller will ever try to read at once. Someone else told me, however, that setting read-ahead below the stripe size is fine, and can, in fact, increase the amount of parallel reads you can do across devices in the array, increasing performance and decreasing load on the array. So which is it? Do read-ahead settings that aren't multiples of the stripe size make sense or not?

  Read the article

• Memcached server: Is it a good practice to point two server urls to the same server?

  - by Niro

  I have a system where there are connections to a memcache server from several different files and servers. I would like to stay with one server but keep the option of increasing the number of memcache servers (for periods of of high traffic). My idea is to tell memcache there are two servers, while the two urls will point (by DNS) to a single server. In the future if I want I can add a server and change DNS without changing the code in many places. Is this a good practice? Is there a performance cost to the fact that there are two server connections but they both point to the same server? Any other idea how to achive instant expeandability of memcache capacity without need to change the code and deploy ?

  Read the article

• Restricting permissions to individual documents on SharePoint

  - by wahle509

  Here's what I'm trying to do: I would like to create a list of documents on a site in my company's SharePoint site. Each document should have specific user's permissions to view and edit it. For example: The list is for performance reports. John has his out there called "John_PR_09.docx". Only him and his supervisor should have permissions to view, edit, or do anything to it. And then another employee has hers out there with permissions for only her and her supervisor, and so on... I have tested this out with a document that I removed the groups and users from (since they inherit permissions from it's parent) and only gave my user account permissions to. I then asked someone else to try and open and she could, she even wrote "TEST" on the document and saved it. What am I doing wrong? I thought I stopped it from inheriting permissions from it's parent and only gave myself rights to edit it.

  Read the article

• Folder redirection save times are awful slow

  - by wbmeu

  I recently set up folder redirection for Documents on Server 2008, but it's painfully slow at the moment. My users are all using Visual Studio 2010, and a save takes 20-30 seconds (whereas it used to take 2 seconds locally). I understand this is because they are being saved to the server, and that takes time (though I did think it would be faster over a gigabit link, with servers on the same network). I enabled offline files on the share, set the option to All files or folders, and enabled Optimize for performance. I thought that this would pull all the files down locally (which I think it did), allow local editing of said files, synchronizing them quietly in the background from time to time (which it does not do - saves right to the share). Is there any way I can speed this process up a bit? Any other tweaks I can do?

  Read the article

• UEC - Can the Cluster Controller and Storage Controller be seperate systems?

  - by Jeremy Hajek

  My department is implementing an Ubuntu Enterprise Cloud. I have done the testing and am quite comfortable with the 4 pieces, CC/SC, CLC, WS, NC. Looking at various documents below it appears the the Storage Controller and Cluster Controller (eucalyptus-sc and eucalyptus-cc) are always installed on the same system. My question is this: can I install the storage controller and the cluster controller on separate systems? http://open.eucalyptus.com/wiki/EucalyptusAdvanced_v2.0 the picture indicates that cc and sc are two different machines http://www.canonical.com/sites/default/files/active/Whitepaper-UbuntuEnterpriseCloudArchitecture-v1.pdf P.10 1st paragraph uses the word "machine(s)" http://software.intel.com/file/31966 P. 8 indicates the same separate architecture BUT... https://help.ubuntu.com/community/UEC/PackageInstallSeparate indicates below that the SC and CC are to be on the same system.

  Read the article

• Windows Server 2008, IIS7 and Windows Authentication

  - by Chalkey

  We currently have a development server set up which we are trying to test some Windows authentication ASP.NET code on. We have turned on Windows Authentication in IIS7 on Windows Server 2008 R2 fine, and it asks the user for a username and password as excepted, but the problem is it doesn't appear to accept any credentials. This code for example... Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load Page.Title = "Home page for " + User.Identity.Name End Sub ...always returns an empty string. One theory we have is that we dont have Active Directory installed as of yet, we are just testing this by logging on via the machine name not a domain. Is this type of authentication only applicatable to domains (if so we can probably install Active Directory and some test accounts) - or is it possible to get the user identity when logging in using the machine name? Ideally we would like to be able to test this on our local machines (Windows 7 Pro) using our own accounts (again these aren't on a domain) and IIS but this has the same issue as our dev server. Thanks,

  Read the article

• Good/Better config for MySQL on an EC2 Large Instance

  - by Tim Reynolds

  I have an EC2 Large instance dedicated to MySQL. It will be serving a Joomla/Magento combo so it has a blend of InnoDB and MyISAM tables. I have only worked with MyISAM in the past and am therefore unfamiliar with the settings InnoDB uses. Experiments so far have been less than fruitful, as I keep causing the InnoDB engine to be disabled. My instance is running Ubuntu 10.04 64 bit server edition and has ~7.5G of ram. MySQL is currently using ~0.6% of that, with somewhat poor performance. I would like to configure it to use as much of the system RAM as is reasonable. Testing some settings I learned that the InnoDB logs can't collectively be larger than 4G. Would anyone be able to provide some base InnoDB and MyISAM settings to get my started. Thank you Tim

  Read the article

• external HDD with SATA & USB interface? [closed]

  - by GregH

  Anyone know of an external HDD that would have (in addition to USB) a SATA (eSATA) port/cable? i.e. Brand/Model Background - In one location I want to use it is I would like to increase the performance by cabling it directly to the PC SATA port, HOWEVER I don't want to have to open up the PC to do this each time. I was thinking of running a SATA cable out through the PC case so I just plug it directly into the external HDD in question. Perhaps it should be also externally powered too so I don't need to run a power cable out from the PC power supply.

  Read the article

• www a-record vs cname-record

  - by Sorin Buturugeanu

  Hi! I have a website that I will be hosting DNS for (testing purposes at first and then it will have some limited traffic). I have set up DNS so that site.tld has an A record to the actual IP but I don't know what to do about www.site.tld. Both site.tld and www.site.tld will point to the same server / application so my logic tells me to add a cname record so that www.site.tld becomes an alias for site.tld, BUT, I've been checking my settings with intodns.com and if I only add a CNAME for the www.site.tld it gives me the following error: ERROR: I could not get any A records for www.cexa.ro! (the error clears once I do an A record for www.site.tld to point to the actual IP) I don't know if there is a "rule" that "www." should always be an A record even though it's actually pointing to the same IP / application. Thanks for helping me understand this!

  Read the article

• Quitting dozens of the same process in OS X Terminal

  - by Artur Sapek

  Whenever I'm testing a python class I'm working on, I initiate and re-initiate python a lot to refresh the updates I make to the code. When I close the Terminal window later, I get a window that says I am about to quit a LOT of running instances of python. Is this a bug on terminal's part, or am I really running all those? I Ctrl-Z out of it each time but it always says [8]+ Stopped Python where the 8 is incremental and often gets into the 20's and 30's. Am I doing something stupid?

  Read the article

• Are there any advantages of GO Widgets over vanilla Android Widgets

  - by Supuhstar

  I use a suite of GO programs on my Android 4.1.2 device. Most relevant to this question, I've installed the GO Launcher EX and GO Weather, and they've recently given me the choice of one paid Go Weather Widget skin for free. Here, my conundrum lies: The skin I want comes in two versions: one for the GO Widget (can only be used on GO Launcher EX) and one for the vanilla Android widget. Are there any advantages for me choosing the GO Widget? I'm thinking things like increased performance because it'd be better integrated into the GO ecosystem, or more options, or something along these lines.

  Read the article

< Previous Page | 529 530 531 532 533 534 535 536 537 538 539 540  | Next Page >