Search Results

Search found 25377 results on 1016 pages for 'development 4 0'.

Page 536/1016 | < Previous Page | 532 533 534 535 536 537 538 539 540 541 542 543  | Next Page >

• Dirt compression from vehicle tires

  - by Mungoid

  So I kinda have this working but its not correct because it just averages, so I wanted to know if anyone here has any ideas. I'm trying to simulate loose dirt compression under the tires of a vehicle to reduce the potential bumpiness of 'chunky' terrain. Currently how I do this is that I have a bounding box shape around my tires, set a little lower so they intersect with the terrain. Each frame, I (currently) average all of the heights of each point in the terrain that are within the box bounds of that tire, and then set them all to that average. Clearly this won't work in most cases because, for example, if i'm on a hill, the terrain will deform way too much. One way I thought was to have a max and min amount the points could raise and lower but that still doesn't seem to work properly and sometimes looks more like steps than smooth dirt. I wanna say that there is probably a bit more to this that what i'm currently doing but I am not sure where to look. Could anyone here shed some light on this subject? Would I benefit any by maybe looking up some smoothing algorith or something similar?

  Read the article

• Why is the framerate (fps) capped at 60?

  - by dennmat

  ISSUE I recently moved a project from my laptop to my desktop(machine info below). On my laptop the exact same code displays the fps(and ms/f) correctly. On my desktop it does not. What I mean by this is on the laptop it will display 300 fps(for example) where on my desktop it will show only up to 60. If I add 100 objects to the game on the laptop I'll see my frame rate drop accordingly; the same test on the desktop results in no change and the frames stay at 60. It takes a lot(~300) entities before I'll see a frame drop on the desktop, then it will descend. It seems as though its "theoretical" frames would be 400 or 500 but will never actually get to that and only do 60 until there's too much to handle at 60. This 60 frame cap is coming from no where. I'm not doing any frame limiting myself. It seems like something external is limiting my loop iterations on the desktop, but for the last couple days I've been scratching my head trying to figure out how to debug this. SETUPS Desktop: Visual Studio Express 2012 Windows 7 Ultimate 64-bit Laptop: Visual Studio Express 2010 Windows 7 Ultimate 64-bit The libraries(allegro, box2d) are the same versions on both setups. CODE Main Loop: while(!abort) { frameTime = al_get_time(); if (frameTime - lastTime >= 1.0) { lastFps = fps/(frameTime - lastTime); lastTime = frameTime; avgMspf = cumMspf/fps; cumMspf = 0.0; fps = 0; } /** DRAWING/UPDATE CODE **/ fps++; cumMspf += al_get_time() - frameTime; } Note: There is no blocking code in the loop at any point. Where I'm at My understanding of al_get_time() is that it can return different resolutions depending on the system. However the resolution is never worse than seconds, and the double is represented as [seconds].[finer-resolution] and seeing as I'm only checking for a whole second al_get_time() shouldn't be responsible. My project settings and compiler options are the same. And I promise its the same code on both machines. My googling really didn't help me much, and although technically it's not that big of a deal. I'd really like to figure this out or perhaps have it explained, whichever comes first. Even just an idea of how to go about figuring out possible causes, because I'm out of ideas. Any help at all is greatly appreciated. EDIT: Thanks All. For any others that find this to disable vSync(windows only) in opengl: First get "wglext.h". It's all over the web. Then you can use a tool like GLee or just write your own quick extensions manager like: bool WGLExtensionSupported(const char *extension_name) { PFNWGLGETEXTENSIONSSTRINGEXTPROC _wglGetExtensionsStringEXT = NULL; _wglGetExtensionsStringEXT = (PFNWGLGETEXTENSIONSSTRINGEXTPROC) wglGetProcAddress("wglGetExtensionsStringEXT"); if (strstr(_wglGetExtensionsStringEXT(), extension_name) == NULL) { return false; } return true; } and then create and setup your function pointers: PFNWGLSWAPINTERVALEXTPROC wglSwapIntervalEXT = NULL; PFNWGLGETSWAPINTERVALEXTPROC wglGetSwapIntervalEXT = NULL; if (WGLExtensionSupported("WGL_EXT_swap_control")) { // Extension is supported, init pointers. wglSwapIntervalEXT = (PFNWGLSWAPINTERVALEXTPROC) wglGetProcAddress("wglSwapIntervalEXT"); // this is another function from WGL_EXT_swap_control extension wglGetSwapIntervalEXT = (PFNWGLGETSWAPINTERVALEXTPROC) wglGetProcAddress("wglGetSwapIntervalEXT"); } Then just call wglSwapIntervalEXT(0) to disable vSync and 1 to enable vSync. I found the reason this is windows only is that openGl actually doesn't deal with anything other than rendering it leaves the rest up to the OS and Hardware. Thanks everyone saved me a lot of time!

  Read the article

• How can I extract a list of Minecraft items and recipes?

  - by Sean

  I'm designing a robust system for resolving item dependencies in Minecraft and to do so, I need to maintain a database of items and recipes. Right now, this database has to be hand-crafted (no pun intended); I would like to know if it is possible to somehow query the Minecraft jars (or perhaps more realistically, grep through them) to extract this data automatically. How can this be done? The project is currently in Python, but it can still be ported to Java without much fuss at this stage. (For the curious.)

  Read the article

• Windows Phone XAML and XNA Apps with Game Components

  - by row1

  I am using the Windows Phone Template "Windows Phone XAML and XNA Apps" and targeting Windows Phone 7/8. Most examples show your game inheriting from Microsoft.Xna.Framework.Game and then adding Microsoft.Xna.Framework.GameComponent items to the Components collection. But as my game page inherits from PhoneApplicationPage there isn't a Components collection or a Game property. How can I use GameComponent from within PhoneApplicationPage?

  Read the article

• Why is my collision detection not accurate?

  - by optimisez

  After trying and trying, I still cannot understand why the leg of character exceeds the wall but no clipping issue when I hit the wall from below. How should I fix it to make him stand still on the wall? From collideWithBox() function below, it shows that playerDest.Y = boxDest.Y - boxDest.height; will get the position the character should standstill on the wall. Theoretically, the clipping effect won't be happen as the character hit the box from below works with the equation playerDest.Y = boxDest.Y + boxDest.height;. void collideWithBox() { if ( spriteCollide(playerDest, boxDest) && keyArr[VK_UP]) //playerDest.Y += 50; playerDest.Y = boxDest.Y + boxDest.height; else if ( spriteCollide(playerDest, boxDest) && !keyArr[VK_UP]) playerDest.Y = boxDest.Y - boxDest.height; } void initPlayer() { // Create texture. hr = D3DXCreateTextureFromFileEx(d3dDevice, "player.png", 169, 44, D3DX_DEFAULT, NULL, D3DFMT_A8R8G8B8, D3DPOOL_MANAGED, D3DX_DEFAULT, D3DX_DEFAULT, D3DCOLOR_XRGB(255, 255, 255), NULL, NULL, &player); playerRect.left = playerRect.top = 0; playerRect.right = 29; playerRect.bottom = 36; playerDest.X = 0; playerDest.Y = 564; playerDest.length = playerRect.right - playerRect.left; playerDest.height = playerRect.bottom - playerRect.top; } void initBox() { hr = D3DXCreateTextureFromFileEx(d3dDevice, "brock.png", 330, 132, D3DX_DEFAULT, NULL, D3DFMT_A8R8G8B8, D3DPOOL_MANAGED, D3DX_DEFAULT, D3DX_DEFAULT, D3DCOLOR_XRGB(255, 255, 255), NULL, NULL, &box); boxRect.left = 33; boxRect.top = 0; boxRect.right = 63; boxRect.bottom = 30; boxDest.X = boxDest.Y = 300; boxDest.length = boxRect.right - boxRect.left; boxDest.height = boxRect.bottom - boxRect.top; } bool spriteCollide(Entity player, Entity target) { float left1, left2; float right1, right2; float top1, top2; float bottom1, bottom2; left1 = player.X; left2 = target.X; right1 = player.X + player.length; right2 = target.X + target.length; top1 = player.Y; top2 = target.Y; bottom1 = player.Y + player.height; bottom2 = target.Y + target.height; if (bottom1 < top2) return false; if (top1 > bottom2) return false; if (right1 < left2) return false; if (left1 > right2) return false; return true; }

  Read the article

• Why Android for new (micro) consoles?

  - by Klaim

  There are a lot of new (micro) consoles with Android inside coming soon or already there (OUYA for example). My question is: why use Android and not another OS as base for these consoles? I assume that there are pragmatic answers to this but I can't see any clear killer feature. For example, one can assume that any stable Linux distribution would work (like Valve seem to think). Android is primarily targetted at mobile platforms which mean it is built around the idea of being interrupted which goes against a lot of what console devs needs in new hardware - but is not killing Android as a platform for gamedev either as it's just a constraint. Why not another OS? What's the Android killer features that make micro-console builder using it instead of Linux or anything else?

  Read the article

• Getting 2D Platformer entity collision Response Correct (side-to-side + jumping/landing on heads)

  - by jbrennan

  I've been working on a 2D (tile based) 2D platformer for iOS and I've got basic entity collision detection working, but there's just something not right about it and I can't quite figure out how to solve it. There are 2 forms of collision between player entities as I can tell, either the two players (human controlled) are hitting each other side-to-side (i. e. pushing against one another), or one player has jumped on the head of the other player (naturally, if I wanted to expand this to player vs enemy, the effects would be different, but the types of collisions would be identical, just the reaction should be a little different). In my code I believe I've got the side-to-side code working: If two entities press against one another, then they are both moved back on either side of the intersection rectangle so that they are just pushing on each other. I also have the "landed on the other player's head" part working. The real problem is, if the two players are currently pushing up against each other, and one player jumps, then at one point as they're jumping, the height-difference threshold that counts as a "land on head" is passed and then it registers as a jump. As a life-long player of 2D Mario Bros style games, this feels incorrect to me, but I can't quite figure out how to solve it. My code: (it's really Objective-C but I've put it in pseudo C-style code just to be simpler for non ObjC readers) void checkCollisions() { // For each entity in the scene, compare it with all other entities (but not with one it's already compared against) for (int i = 0; i < _allGameObjects.count(); i++) { // GameObject is an Entity GEGameObject *firstGameObject = _allGameObjects.objectAtIndex(i); // Don't check against yourself or any previous entity for (int j = i+1; j < _allGameObjects.count(); j++) { GEGameObject *secondGameObject = _allGameObjects.objectAtIndex(j); // Get the collision bounds for both entities, then see if they intersect // CGRect is a C-struct with an origin Point (x, y) and a Size (w, h) CGRect firstRect = firstGameObject.collisionBounds(); CGRect secondRect = secondGameObject.collisionBounds(); // Collision of any sort if (CGRectIntersectsRect(firstRect, secondRect)) { //////////////////////////////// // // // Check for jumping first (???) // // //////////////////////////////// if (firstRect.origin.y > (secondRect.origin.y + (secondRect.size.height * 0.7))) { // the top entity could be pretty far down/in to the bottom entity.... firstGameObject.didLandOnEntity(secondGameObject); } else if (secondRect.origin.y > (firstRect.origin.y + (firstRect.size.height * 0.7))) { // second entity was actually on top.... secondGameObject.didLandOnEntity.(firstGameObject); } else if (firstRect.origin.x > secondRect.origin.x && firstRect.origin.x < (secondRect.origin.x + secondRect.size.width)) { // Hit from the RIGHT CGRect intersection = CGRectIntersection(firstRect, secondRect); // The NUDGE just offsets either object back to the left or right // After the nudging, they are exactly pressing against each other with no intersection firstGameObject.nudgeToRightOfIntersection(intersection); secondGameObject.nudgeToLeftOfIntersection(intersection); } else if ((firstRect.origin.x + firstRect.size.width) > secondRect.origin.x) { // hit from the LEFT CGRect intersection = CGRectIntersection(firstRect, secondRect); secondGameObject.nudgeToRightOfIntersection(intersection); firstGameObject.nudgeToLeftOfIntersection(intersection); } } } } } I think my collision detection code is pretty close, but obviously I'm doing something a little wrong. I really think it's to do with the way my jumps are checked (I wanted to make sure that a jump could happen from an angle (instead of if the falling player had been at a right angle to the player below). Can someone please help me here? I haven't been able to find many resources on how to do this properly (and thinking like a game developer is new for me). Thanks in advance!

  Read the article

• How to move a rectangle properly?

  - by bodycountPP

  I recently started to learn OpenGL. Right now I finished the first chapter of the "OpenGL SuperBible". There were two examples. The first had the complete code and showed how to draw a simple triangle. The second example is supposed to show how to move a rectangle using SpecialKeys. The only code provided for this example was the SpecialKeys method. I still tried to implement it but I had two problems. In the previous example I declared and instaciated vVerts in the SetupRC() method. Now as it is also used in the SpecialKeys() method, I moved the declaration and instantiation to the top of the code. Is this proper c++ practice? I copied the part where vertex positions are recalculated from the book, but I had to pick the vertices for the rectangle on my own. So now every time I press a key for the first time the rectangle's upper left vertex is moved to (-0,5:-0.5). This ok because of GLfloat blockX = vVerts[0]; //Upper left X GLfloat blockY = vVerts[7]; // Upper left Y But I also think that this is the reason why my rectangle is shifted in the beginning. After the first time a key was pressed everything works just fine. Here is my complete code I hope you can help me on those two points. GLBatch squareBatch; GLShaderManager shaderManager; //Load up a triangle GLfloat vVerts[] = {-0.5f,0.5f,0.0f, 0.5f,0.5f,0.0f, 0.5f,-0.5f,0.0f, -0.5f,-0.5f,0.0f}; //Window has changed size, or has just been created. //We need to use the window dimensions to set the viewport and the projection matrix. void ChangeSize(int w, int h) { glViewport(0,0,w,h); } //Called to draw the scene. void RenderScene(void) { //Clear the window with the current clearing color glClear(GL_COLOR_BUFFER_BIT|GL_DEPTH_BUFFER_BIT|GL_STENCIL_BUFFER_BIT); GLfloat vRed[] = {1.0f,0.0f,0.0f,1.0f}; shaderManager.UseStockShader(GLT_SHADER_IDENTITY,vRed); squareBatch.Draw(); //perform the buffer swap to display the back buffer glutSwapBuffers(); } //This function does any needed initialization on the rendering context. //This is the first opportunity to do any OpenGL related Tasks. void SetupRC() { //Blue Background glClearColor(0.0f,0.0f,1.0f,1.0f); shaderManager.InitializeStockShaders(); squareBatch.Begin(GL_QUADS,4); squareBatch.CopyVertexData3f(vVerts); squareBatch.End(); } //Respond to arrow keys by moving the camera frame of reference void SpecialKeys(int key,int x,int y) { GLfloat stepSize = 0.025f; GLfloat blockSize = 0.5f; GLfloat blockX = vVerts[0]; //Upper left X GLfloat blockY = vVerts[7]; // Upper left Y if(key == GLUT_KEY_UP) { blockY += stepSize; } if(key == GLUT_KEY_DOWN){blockY -= stepSize;} if(key == GLUT_KEY_LEFT){blockX -= stepSize;} if(key == GLUT_KEY_RIGHT){blockX += stepSize;} //Recalculate vertex positions vVerts[0] = blockX; vVerts[1] = blockY - blockSize*2; vVerts[3] = blockX + blockSize * 2; vVerts[4] = blockY - blockSize *2; vVerts[6] = blockX+blockSize*2; vVerts[7] = blockY; vVerts[9] = blockX; vVerts[10] = blockY; squareBatch.CopyVertexData3f(vVerts); glutPostRedisplay(); } //Main entry point for GLUT based programs int main(int argc, char** argv) { //Sets the working directory. Not really needed gltSetWorkingDirectory(argv[0]); //Passes along the command-line parameters and initializes the GLUT library. glutInit(&argc,argv); //Tells the GLUT library what type of display mode to use, when creating the window. //Double buffered window, RGBA-Color mode,depth-buffer as part of our display, stencil buffer also available glutInitDisplayMode(GLUT_DOUBLE|GLUT_RGBA|GLUT_DEPTH|GLUT_STENCIL); //Window size glutInitWindowSize(800,600); glutCreateWindow("MoveRect"); glutReshapeFunc(ChangeSize); glutDisplayFunc(RenderScene); glutSpecialFunc(SpecialKeys); //initialize GLEW library GLenum err = glewInit(); //Check that nothing goes wrong with the driver initialization before we try and do any rendering. if(GLEW_OK != err) { fprintf(stderr,"Glew Error: %s\n",glewGetErrorString); return 1; } SetupRC(); glutMainLoop(); return 0; }

  Read the article

• Is IDirectInput8::FindDevice totally broken on Windows 7?

  - by Noora

  I'm developing on Windows 7, and using DirectInput8 for my input needs. I'm tracking gamepad additions and removals (that is, GUID_DEVINTERFACE_HID devices) using the DBT_DEVICEARRIVAL and DBT_DEVICEREMOVECOMPLETE messages, which works fine. However, what I've come to find out is that no matter what I do, passing the received values from DBT_DEVICEARRIVAL to IDirectInput8's FindDevice method, it will always fail to identify the device, returning DIERR_DEVICENOTREG. DirectInput still clearly knows about the device, because I can enumerate and create it just fine. I've tried with three different gamepads, and the error persists, so it's not about that either. I also tried passing some alternative interface GUIDs for the RegisterDeviceNotification call, didn't help. So, has anyone else faced the same problem, and have you found a usable workaround? I'm afraid I'll soon have to stoop down to re-enumerating all devices when something is added or removed, but I'll first give this question one last shot here. EDIT: For the record, I've also tried pretty much every single HID API & SetupAPI function for alternative ways of figuring out the needed GUIDs, with zero success. So if you're facing the same problem as me, don't bother with that route. I'm pretty sure those GUIDs are made up by DirectInput itself somehow. Short of reverse engineering dinput8.dll, I'm truly out of ideas now.

  Read the article

• Is there any guarantee about the graphical output of different GPUs in DirectX?

  - by cloudraven

  Let's say that I run the same game in two different computers with different GPUs. If for example they are both certified for DirectX 10. Is there a guarantee that the output for a given program (game) is going to be the same regardless the manufacturer or model of the GPU? I am assuming the configurable settings are exactly the same in both cases. I heard that it is not the case for DirectX 9 and older, but that it is true for DirectX 10. If someone could provide a source confirming or denying it, it would be great. Also what is the guarantee offered. Will the output be exactly the same or just perceptually the same to the human eye?

  Read the article

• How do I implement deceleration for the player character?

  - by tesselode

  Using delta time with addition and subtraction is easy. player.speed += 100 * dt However, multiplication and division complicate things a bit. For example, let's say I want the player to double his speed every second. player.speed = player.speed * 2 * dt I can't do this because it'll slow down the player (unless delta time is really high). Division is the same way, except it'll speed things way up. How can I handle multiplication and division with delta time? Edit: it looks like my question has confused everyone. I really just wanted to be able to implement deceleration without this horrible mass of code: else if speed > 0 then speed = speed - 20 * dt if speed < 0 then speed = 0 end end if speed < 0 then speed = speed + 20 * dt if speed > 0 then speed = 0 end end end Because that's way bigger than it needs to be. So far a better solution seems to be: speed = speed - speed * whatever_number * dt

  Read the article

• Playing a sound on collision?

  - by Eric McLoughlin

  I'm making a pool game. I've separated the gameplay logic and the physics into two systems, entities and physics. Each entity holds a reference to a body which the physics system uses. The body itself holds a reference back to it's owner. When an entity collides with another entity, the Collided(Entity other) method is called on both. What I'm trying to do now is to play a sound when both entities colliding are of a certain subclass. I'm not sure how to do that. I could do it in the Collided method, but then the sound would be played two times at the same time, since the method was called on both entities. How do you suggest I do this?

  Read the article

• returning correct multiTouch id

  - by Max

  I've spent countless hours on reading tutorials and looking at every question related to multiTouch from here and Stackoverflow. But I just cannot figure out how to do this correctly. I use a loop to get my pointerId, I dont see alot of people doing this but its the only way I've managed to get it somewhat working. I have two joysticks on my screen, one for moving and one for controlling my sprites rotation and the angle he shoots, like in Monster Shooter. Both these work fine. My problem is that when I Move my sprite at the same time as Im shooting, my touchingPoint for my movement is set to the touchingPoint of my shooting, since the x and y is higher on the touchingPoint of my shooting (moving-stick on left side of screen, shooting-stick on right side), my sprite speeds up, this creates an unwanted change in speed for my sprite. I will post my entire onTouch method here with some variable-changes to make it more understandable. Since I do not know where Im going wrong. public void update(MotionEvent event) { if (event == null && lastEvent == null) { return; } else if (event == null && lastEvent != null) { event = lastEvent; } else { lastEvent = event; } int pointerCount = event.getPointerCount(); for (int i = 0; i < pointerCount; i++) { int x = (int) event.getX(i); int y = (int) event.getY(i); int id = event.getPointerId(i); int action = event.getActionMasked(); int actionIndex = event.getActionIndex(); String actionString; switch (action) { case MotionEvent.ACTION_DOWN: actionString = "DOWN"; break; case MotionEvent.ACTION_UP: shooting=false; // when shooting is true, it shoots dragging=false; // when dragging is true, it moves actionString = "UP"; break; case MotionEvent.ACTION_POINTER_DOWN: actionString = "PNTR DOWN"; break; case MotionEvent.ACTION_POINTER_UP: shooting=false; dragging=false; actionString = "PNTR UP"; break; case MotionEvent.ACTION_CANCEL: shooting=false; dragging=false; actionString = "CANCEL"; break; case MotionEvent.ACTION_MOVE: try{ if((int) event.getX(id) > 0 && (int) event.getX(id) < touchingBox && (int) event.getY(id) > touchingBox && (int) event.getY(id) < view.getHeight()){ movingPoint.x = (int) event.getX(id); movingPoint.y = (int) event.getY(id); dragging = true; } else if((int) event.getX(id) > touchingBox && (int) event.getX(id) < view.getWidth() && (int) event.getY(id) > touchingBox && (int) event.getY(id) < view.getHeight()){ shootingPoint.x = (int) event.getX(id); shootingPoint.y = (int) event.getY(id); shooting=true; }else{ shooting=false; dragging=false; } }catch(Exception e){ } actionString = "MOVE"; break; default: actionString = ""; } Wouldnt post this much code if I wasnt at an absolute loss of what I'm doing wrong. I simply can not get a good understanding of how multiTouching works. basicly movingPoint changes for both my first and second finger. I bind it to a box, but aslong as I hold one finger within this box, it changes its value based on where my second finger touches. It moves in the right direction and nothing gives an error, the problem is the speed-change, its almost like it adds up the two touchingPoints.

  Read the article

• Increase moving speed of body

  - by Siddharth

  How to move ball speedily on the screen using box2d in libGDX? public class Box2DDemo implements ApplicationListener { private SpriteBatch batch; private TextureRegion texture; private World world; private Body groundDownBody, groundUpBody, groundLeftBody, groundRightBody, ballBody; private BodyDef groundBodyDef1, groundBodyDef2, groundBodyDef3, groundBodyDef4, ballBodyDef; private PolygonShape groundDownPoly, groundUpPoly, groundLeftPoly, groundRightPoly; private CircleShape ballPoly; private Sprite sprite; private FixtureDef fixtureDef; private Vector2 ballPosition; private Box2DDebugRenderer renderer; Vector2 vector2; @Override public void create() { texture = new TextureRegion(new Texture( Gdx.files.internal("img/red_ring.png"))); sprite = new Sprite(texture); sprite.setOrigin(sprite.getWidth() / 2, sprite.getHeight() / 2); batch = new SpriteBatch(); world = new World(new Vector2(0.0f, -10.0f), false); groundBodyDef1 = new BodyDef(); groundBodyDef1.type = BodyType.StaticBody; groundBodyDef1.position.x = 0.0f; groundBodyDef1.position.y = 0.0f; groundDownBody = world.createBody(groundBodyDef1); groundBodyDef2 = new BodyDef(); groundBodyDef2.type = BodyType.StaticBody; groundBodyDef2.position.x = 0f; groundBodyDef2.position.y = Gdx.graphics.getHeight(); groundUpBody = world.createBody(groundBodyDef2); groundBodyDef3 = new BodyDef(); groundBodyDef3.type = BodyType.StaticBody; groundBodyDef3.position.x = 0f; groundBodyDef3.position.y = 0f; groundLeftBody = world.createBody(groundBodyDef3); groundBodyDef4 = new BodyDef(); groundBodyDef4.type = BodyType.StaticBody; groundBodyDef4.position.x = Gdx.graphics.getWidth(); groundBodyDef4.position.y = 0f; groundRightBody = world.createBody(groundBodyDef4); groundDownPoly = new PolygonShape(); groundDownPoly.setAsBox(480.0f, 10f); fixtureDef = new FixtureDef(); fixtureDef.density = 0f; fixtureDef.restitution = 1f; fixtureDef.friction = 0f; fixtureDef.shape = groundDownPoly; fixtureDef.filter.groupIndex = 0; groundDownBody.createFixture(fixtureDef); groundUpPoly = new PolygonShape(); groundUpPoly.setAsBox(480.0f, 10f); fixtureDef = new FixtureDef(); fixtureDef.friction = 0f; fixtureDef.restitution = 0f; fixtureDef.density = 0f; fixtureDef.shape = groundUpPoly; fixtureDef.filter.groupIndex = 0; groundUpBody.createFixture(fixtureDef); groundLeftPoly = new PolygonShape(); groundLeftPoly.setAsBox(10f, 320f); fixtureDef = new FixtureDef(); fixtureDef.friction = 0f; fixtureDef.restitution = 0f; fixtureDef.density = 0f; fixtureDef.shape = groundLeftPoly; fixtureDef.filter.groupIndex = 0; groundLeftBody.createFixture(fixtureDef); groundRightPoly = new PolygonShape(); groundRightPoly.setAsBox(10f, 320f); fixtureDef = new FixtureDef(); fixtureDef.friction = 0f; fixtureDef.restitution = 0f; fixtureDef.density = 0f; fixtureDef.shape = groundRightPoly; fixtureDef.filter.groupIndex = 0; groundRightBody.createFixture(fixtureDef); ballPoly = new CircleShape(); ballPoly.setRadius(16f); fixtureDef = new FixtureDef(); fixtureDef.shape = ballPoly; fixtureDef.density = 1f; fixtureDef.friction = 1f; fixtureDef.restitution = 1f; ballBodyDef = new BodyDef(); ballBodyDef.type = BodyType.DynamicBody; ballBodyDef.position.x = (int) 200; ballBodyDef.position.y = (int) 200; ballBody = world.createBody(ballBodyDef); // ballBody.setLinearVelocity(200f, 200f); // ballBody.applyLinearImpulse(new Vector2(250f, 250f), // ballBody.getLocalCenter()); ballBody.createFixture(fixtureDef); renderer = new Box2DDebugRenderer(true, false, false); } @Override public void dispose() { ballPoly.dispose(); groundLeftPoly.dispose(); groundUpPoly.dispose(); groundDownPoly.dispose(); groundRightPoly.dispose(); world.destroyBody(ballBody); world.dispose(); } @Override public void pause() { } @Override public void render() { world.step(1f/30f, 3, 3); Gdx.gl.glClearColor(1f, 1f, 1f, 1f); Gdx.gl.glClear(GL10.GL_COLOR_BUFFER_BIT); batch.begin(); vector2 = ballBody.getLinearVelocity(); System.out.println("X=" + vector2.x + " Y=" + vector2.y); ballPosition = ballBody.getPosition(); renderer.render(world,batch.getProjectionMatrix()); // int preX = (int) (vector2.x / Math.abs(vector2.x)); // int preY = (int) (vector2.y / Math.abs(vector2.y)); // // if (Math.abs(vector2.x) == 0.0f) // ballBody1.setLinearVelocity(1.4142137f, vector2.y); // else if (Math.abs(vector2.x) < 1.4142137f) // ballBody1.setLinearVelocity(preX * 5, vector2.y); // // if (Math.abs(vector2.y) == 0.0f) // ballBody1.setLinearVelocity(vector2.x, 1.4142137f); // else if (Math.abs(vector2.y) < 1.4142137f) // ballBody1.setLinearVelocity(vector2.x, preY * 5); batch.draw(sprite, (ballPosition.x - (texture.getRegionWidth() / 2)), (ballPosition.y - (texture.getRegionHeight() / 2))); batch.end(); } @Override public void resize(int arg0, int arg1) { } @Override public void resume() { } } I implement above code but I can not achieve higher moving speed of the ball

  Read the article

• Rendering projectiles

  - by Chris

  I'm working on a simple game that has the user control a space ship that shoots small circular projectiles. However, I'm not sure how to render these. Right now I know how to make a LPDIREC3DSURFACE for a sprite and render it onto a LPDIRECT3DDEVICE9, but that's only for a single sprite. I assume I don't need to constantly create new surfaces and devices. How should projectile generation/rendering be handled? Thanks in advance.

  Read the article

• Could I be going crazy with Event Handlers? Am I going the "wrong way" with my design?

  - by sensae

  I guess I've decided that I really like event handlers. I may be suffering a bit from analysis paralysis, but I'm concerned about making my design unwieldy or running into some other unforeseen consequence to my design decisions. My game engine currently does basic sprite-based rendering with a panning overhead camera. My design looks a bit like this: SceneHandler Contains a list of classes that implement the SceneListener interface (currently only Sprites). Calls render() once per tick, and sends onCameraUpdate(); messages to SceneListeners. InputHandler Polls the input once per tick, and sends a simple "onKeyPressed" message to InputListeners. I have a Camera InputListener which holds a SceneHandler instance and triggers updateCamera(); events based on what the input is. AgentHandler Calls default actions on any Agents (AI) once per tick, and will check a stack for any new events that are registered, dispatching them to specific Agents as needed. So I have basic sprite objects that can move around a scene and use rudimentary steering behaviors to travel. I've gotten onto collision detection, and this is where I'm not sure the direction my design is going is good. Is it a good practice to have many, small event handlers? I imagine going the way I am that I'd have to implement some kind of CollisionHandler. Would I be better off with a more consolidated EntityHandler which handles AI, collision updates, and other entity interactions in one class? Or will I be fine just implementing many different event handling subsystems which pass messages to each other based on what kind of event it is? Should I write an EntityHandler which is simply responsible for coordinating all these sub event handlers? I realize in some cases, such as my InputHandler and SceneHandler, those are very specific types of events. A large portion of my game code won't care about input, and a large portion won't care about updates that happen purely in the rendering of the scene. Thus I feel my isolation of those systems is justified. However, I'm asking this question specifically approaching game logic type events.

  Read the article

• Create Levels using blender

  - by notrodash

  I am creating a game and I have a custom level format for levels in my game. I wanted to know if it is possible to create levels for that kinda format in Blender. My format is XML based and just declares the positions of certain objects. Online I have seen many people use Blender to create levels in their own custom format that blender can understand. How do i get blender to understand my format and use blender to create levels for my game?

  Read the article

• Updating entities in response to collisions - should this be in the collision-detection class or in the entity-updater class?

  - by Prog

  In a game I'm working on, there's a class responsible for collision detection. It's method detectCollisions(List<Entity> entities) is called from the main gameloop. The code to update the entities (i.e. where the entities 'act': update their positions, invoke AI, etc) is in a different class, in the method updateEntities(List<Entity> entities). Also called from the gameloop, after the collision detection. When there's a collision between two entities, usually something needs to be done. For example, zero the velocity of both entities in the collision, or kill one of the entities. It would be easy to have this code in the CollisionDetector class. E.g. in psuedocode: for(Entity entityA in entities){ for(Entity entityB in entities){ if(collision(entityA, entityB)){ if(entityA instanceof Robot && entityB instanceof Robot){ entityA.setVelocity(0,0); entityB.setVelocity(0,0); } if(entityA instanceof Missile || entityB instanceof Missile){ entityA.die(); entityB.die(); } } } } However, I'm not sure if updating the state of entities in response to collision should be the job of CollisionDetector. Maybe it should be the job of EntityUpdater, which runs after the collision detection in the gameloop. Is it okay to have the code responding to collisions in the collision detection system? Or should the collision detection class only detect collisions, report them to some other class and have that class affect the state of the entities?

  Read the article

• Influence Maps for Pathfinding?

  - by james

  I'm taking the plunge and am getting into game dev, it's been going well but I've got stuck on a problem. I have a maze that is 100x100 with 0,1 to indicate if its a path or a wall. Within the maze I have 300 or so enemies and a player. The outcome I'm looking for is all the enemies work their way towards the player position. Originally I did this using an A* path finding algorithm but with 300 enemies it was taking forever to path find each one individually. After some research I found that an influence map / collaborative diffusion would be the best way to go. But I'm having a real hard time working out how this is actually done. Firstly.. How do you create a influence map? From what I understand each of my walls with have a scent of 0 so that makes them impassable.. then basically a radial effect from my player position to each other cell (So my player starts at 100 and then going outwards from that each other cell will be reduced value) Is that correct? If so,.. How would you do that (Math magic?) My next problem is if that is correct how would my "enemies" stop from getting stuck if they have gone down the wrong way? As say if my player was standing on the otherside of a wall if the enemy is just looking for larger numbers wont it keep getting stuck? I'm doing this in JavaScript so performance is key. Thanks for any help! EDIT: Or if anyones got a better solution? I've been reading about navmeshs, steering pathing, pre calculating all paths on load etc etc

  Read the article

• Maya and Game Engines (i.e. Environment Testing)

  - by DiscreteGenius

  What does it mean if I'm designing an environment and I want to test it in the game engine, to see what its like to "run" [or fly] around my environment? I heard an instructor say that exact thing in a Maya training video and I'd like to know more about "How Game Engines and Maya are related to each other." He stated this would be done to see how things look in "size" (e.g. I assume he meant: 'How big is the cathedral, bridge, wall, building, etc.'). I've tried to research such information but it's too complicated, and detailed. I just want a simplistic response to my query. Thanks to everyone willing to help and not criticize my question.

  Read the article

• Specifying force and angle in ApplyImpulse in box2d

  - by Deepak Mahalingam

  I need to apply an impulse on a object with a particular force and at a particular angle in Box2d. If I am right the syntax would be the following: body.GetBody().ApplyImpulse(new b2Vec2(direction, power),body.GetBody().GetWorldCenter()); The problem is my direction is in angles. I found a discussion where it was said that the way we can convert an angle into a vector would be as: new b2Vec2(Math.cos(angle*Math.PI/180),Math.sin(angle*Math.PI/180)); Now I am not sure how to combine these two. In other words, if I wish to apply a force of 30 units at an angle of 30 degrees at the center of the object, how should I do it?

  Read the article

• How to run around another football player

  - by Lumis

  I have finished a simple 2D one-on-one indoor football Android game. The thing that it seemed so simple to me, a human being, turned out to be difficult for a computer: how to go around the opponent … At the moment the game logic of the computer player is that if it hits into the human player will step back few points on the pixel greed and then try again to go towards the ball. The problem is if the human player is in-between then the computer player will oscillate in one place, which does not look very nice and the human opponent can use this weakness to control the game. You can see this in the photo – at the moment the computer will go along the red line indefinitely. I tried few ideas but it proved not easy to do it when both the human player and the ball are constantly moving so at each step computer would change directions and “oscillate” again. Once when the computer player reaches the ball it will kick it with certain amount of random strength and direction towards the human’s goal. The question here is how to formulate the logic of going around the ever moving human opponent and how to translate it into the co-ordinate system and frame by frame animation… any suggestions welcome.

  Read the article

• Start Game Programming [on hold]

  - by vishalpamnani

  I am 23 and working as a Software Developer. Though my work is entirely based on Java and Advanced Java, I know a very little and all my interest is in developing games. I want to make a my career in Gaming Industry as a Game Programmer. I am not able to figure out the starting step to start with Game Programming. I have zero knowledge with developing games and never ever tried a tiniest of game. Please suggest me from where to start. Which programming language to start with? What should be my practice? What references to use? What type of games to begin with? BTW my preferable language would be C++ ~Thanks

  Read the article

• Having trouble's understanding NIF model file format?

  - by NoobScratcher

  I'm attempting too develop a 3rd party application to make it easy to import 3d model part's into my mod for skyrim the plan was to have a fileviewer and preview window of the nif model but since , I don't know what the NIF file format actually is or where to get the vertex data from it or the hole nine yards of parsing a text file in detail I'm at a lost what to do. I'm very good at C++ but not at this super over complicated file formats , id much prefer .obj over the nif file format specification here -- http://niftools.sourceforge.net/doc/nif/index.html If someone could help me in understanding the file format in a natural and simple way and the exact parsing needed to create the 3D Model in the frustum and a explanation on how you figured that out would be happy to know. I use cygwin , notepad++ , win32 7

  Read the article

• How to handle a Tile Map Scrolling [duplicate]

  - by DGomez

  This question already has an answer here: Implementing a camera / viewport to a 2D game 1 answer i'm making a video game, and i'm having, i think, a concept problem. The game will be a platformer which will use tile maps, so to start i will create a mask matrix indicating the tiles to be loaded, and etc..., so my problem is, how to handle the scrolling? should i create a giant mask matrix indicating in each position of the whole level what is supposed to be loaded, and according to the position of the player, change the section to be drawed?? Is this a correct approach to this situation??

  Read the article

< Previous Page | 532 533 534 535 536 537 538 539 540 541 542 543  | Next Page >