Search Results

Search found 25049 results on 1002 pages for 'dev null'.

Page 538/1002 | < Previous Page | 534 535 536 537 538 539 540 541 542 543 544 545  | Next Page >

  • Force local IP traffic to an external interface

    - by calandoa
    I have a machine with several interfaces that I can configure as I want, for instance: eth1: 192.168.1.1 eth2: 192.168.2.2 I would like to be able to forward all the traffic to one of these local address trhough the other interface. For instance, all requests to an iperf, ftp, http server at 192.168.1.1 are not just routed internally, but forwarded through eth2 (and the external network will take care of re-routing the packet to eth1). I tried and looked at several commands, like iptables, ip route, etc... but nothing worked. The closest behavior I could get was done with: ip route change to 192.168.1.1/24 dev eth2 which send all 192.168.1.x on eth2, except for 192.168.1.1 which is still routed internally. The goal of this setup is to do interface driver testing without using two PCs. I am using Linux, but if you know how to do that with Windows, I'll buy it!

    Read the article

  • PPP connection between PalmOS and Ubuntu (over ttyUSB0?) without crashy "visor" kernel module

    - by Chris Boyle
    I have a Palm Treo 680 which I'd like to use as a media remote, using Palm MPC. Almost the exact instructions on that page used to work perfectly for establishing a PPP connection over the USB cable; I think I last tried it in Ubuntu 9.04 (Jaunty). In Karmic, I find that /dev/ttyUSB{0,1} are not present by default, and when I modprobe visor to get them, the Palm immediately crashes and reboots, as seen in Ubuntu bug 522753 (it reboots again as long as the module is still loaded and USB is still connected). The usbserial module has the same result. From reading that bug and elsewhere, it appears that the visor module is abandoned, and jpilot and friends use some other approach to talk to PalmOS over USB these days, which might not even involve a ttyUSB device. My question is, therefore: How do I create a PPP connection between PalmOS and Karmic without crashing the Palm?

    Read the article

  • Very slow disk performance on Dell PowerEdge 2950 w/ PERC 6/i running RAID 10

    - by vocoder
    I recently set up a server running Ubuntu 10.04 LTS on a Dell PowerEdge 2950 server - it has 6 500 gb 7200RPM SATA drives setup in a RAID 10 config. I am seeing extremely poor disk performance - the RAID array reports all disks are normal and using MegaCLI, it looks like the BBU is fine. hdparm -tT /dev/sda reports: Timing cached reads: 90 MB in 2.05 seconds = 43.96 MB/sec Timing buffered disk reads: 24 MB in 3.11 seconds = 7.72 MB/sec So as you can see, it takes forever to something as simple as an apt-get upgrade and even logging into the server. How do I go about troubleshooting what is causing this? I upgraded the firmware on the PERC 6i RAID controller to the latest, but didn't see any improvements.

    Read the article

  • How to determine the used size of device associated's buffer

    - by dubbaluga
    Hi, when mounting a device without the "sync" option, e. g. by invoking the following: mount -o async /dev/sdc1 /mnt a buffer is associated with a device to optimize (speed) read/write operations. Is there a way to determine the size of this buffer? Another question that comes into my mind is, if it's possible to find out how much of it is used currently. This can be interesting to determine the time it would take to "sync" or "umount" slow devices, such as flash-based media. Thanks in advance for your answers, Rainer

    Read the article

  • SNMPD timeout yet netcat shows port as open

    - by Kirill Gordeenko
    SNMPD config (I have this config working on a different server): com2sec readonly default public group MyROGroup v1 readonly group MyROGroup v2c readonly group MyROGroup usm readonly view all included .1 80 access MyROGroup "" any noauth exact all none none syslocation <LOCATION> syscontact <CONTACT> When I check the port from remote machine: » nc -zvu xx.xx.xx.xx 161 Connection to xx.xx.xx.xx 161 port [udp/snmp] succeeded! This also works locally (I get all the right stats): snmpwalk -v 2c -c public localhost Yet when I try same command locally or remotely with external IP: Timeout: No Response from xx.xx.xx.xx IPTables are disabled on both machines. /etc/sysconfig/snmpd looks like this: OPTIONS="-Lsd -Lf /dev/null -p /var/run/snmpd.pid" -a /etc/default/snmpd is empty.

    Read the article

  • FreeBSD: Samba performance over GBit-Ethernet

    - by Axel Gneiting
    I'm using a FreeBSD NAS with RAID-Z. I can read ~300MB/s from the ZFS disks to /dev/null on the box, but only get about 50MB/s over GBit-Ethernet with SMB to Windows 7 (Samba 3.5.6). Both systems have Intel-PCIe-NICs and are connected directly. Samba is configured to use AIO and I already tried to tune TCP/IP: kern.ipc.maxsockbuf=16777216 net.inet.tcp.sendspace=1048576 net.inet.tcp.recvspace=1048576 net.inet.tcp.sendbuf_max=8388608 net.inet.tcp.recvbuf_max=8388608 net.inet.tcp.delayed_ack=0 Any ideas what's causing the bottleneck? I think the link should handle 100 MB/s easily.

    Read the article

  • Is there a simple Load Balancer app for development environment on Windows?

    - by djangofan
    Does there exist a simple Load Balancer app for development on Windows? I am running a pair of JBoss 5.x instances in a cluster on a single machine. Normally , this configuration is load balanced by a nice hardware load balancer but I am wondering if there is a simple piece of software to enable load balancing in my Eclipse dev environment. Basically, for example, I want a load balancer running on port 11111 that round-robins between the 2 clustered JBoss instances on ssl ports 8443 and 8543 . (or http port if thats not possible) I know that Glassfish has a built-in load balancer but I can't use Glassfish. One idea I have is to try to setup a separate instance of Tomcat with the "balancer" web app. Im trying that now... not sure if it will work... and its a complicated setup and I wish there was something really easy.

    Read the article

  • Why does a zip file appear larger than the source file especially when it is text?

    - by PeanutsMonkey
    I have a text file that is 19 bytes in size and having compressed the file using zip and 7zip, it appears to be larger. I had a read of the question on Why is a 7zipped file larger than the raw file? as well as Why doesn't ZIP Compression compress anything? but considering the file is not already compressed I would have expected further compression. Attached is a screenshot. EDIT0 I took the example further by creating a file that contained random data as follows dd if=/dev/urandom of=sample.log bs=1G count=1 and attempted to compress the file using both zip and 7zip however there were no compression gains. Why is that?

    Read the article

  • Exim queue in WHM

    - by Xobb
    Hi fellas, I've got the centos server with WHM. The mail server is exim. I need exim put all messages in queue and not sending directly.Though I've added the queue_only option to exim configuration and the messages are collected in the queue now. Afterwards I've found out that someone is calling exim -q to process the queue every once in a while. I've found the following cron job: 0 6 * * * /scripts/exim_tidydb > /dev/null 2>&1 which I beleive has been used to process the exim queue. Also I suspect that script was installed alongside with WHM. Surely I've commented it out and was expecting everything to work just fine. But that didn't happen. I still get the exim queue processed once in a while. Am I missing anything? What may cause my exim queue to process? Here is cat /etc/exim.conf | grep queue queue_only deliver_queue_load_max = 3 Thanks

    Read the article

  • How Do I make an Acer T230H Touchcreen work on Ubuntu 9.10?

    - by N Rahl
    I've done this so far: sudo nano /etc/udev/rules.d/99-touchscreen.rules And added: SUBSYSTEM=="usb", ATTRS{idVendor}=="0408", ATTRS{idProduct}=="3000", SYMLINK+="usb/quanta_touch" SUBSYSTEM=="input", KERNEL=="event*", ATTRS{idVendor}=="0408", ATTRS{idProduct}=="3000", SYMLINK+="input/quanta_touch" sudo service udev restart then the instructions here: http://ubuntuforums.org/showpost.php?p=8932808&postcount=36 And then added to my xorg conf: Section "InputDevice" Identifier "Acer T230H" Driver "hidtouch" Option "SendCoreEvents" "true" Option "ReportingMode" "Raw" Option "Device" "/dev/usb/quanta_touch" Option "PacketCount" "13" Option "OpcodePressure" "852034" Option "OpcodeX" "65584" Option "OpcodeY" "65585" Option "CalibrationModel" "1" Option "CornerTopLeftX" "0" Option "CornerTopLeftY" "0" Option "CornerTopRightX" "1920" # 1920 for 23" Option "CornerTopRightY" "0" Option "CornerBottomLeftX" "0" Option "CornerBottomLeftY" "1080" # 1080 for 23" Option "CornerBottomRightX" "1920" # 1920 for 23" Option "CornerBottomRightY" "1080" # 1080 for 23" Option "CornerScreenWidth" "1920" # 1920 for 23" Option "CornerScreenHeight" "1080" # 1080 for 23" EndSection Section "ServerLayout" Identifier "Touchscreen" InputDevice "Acer T230H" "SendCoreEvents" EndSection And restarted. And the touchscreen does nothing. Any ideas?

    Read the article

  • Change Audio title from English to Sinhalese using ffmpeg

    - by user330461
    I insert an extra Sound track in my video file and it works well. ffmpeg -i news.mov -i news.wav -map 0:0 -map 0:1 -map 1:0 -pass 1 -vcodec libx264 -preset fast -b 512k -minrate 512k -maxrate 512k -bufsize 512k -threads 0 -f mp4 -an -y /dev/null && ffmpeg -i news.mov -i news.wav -map 0:0 -map 0:1 -map 1:0 -pass 2 -acodec libfaac -ab 128k -ac 2 -vcodec libx264 -preset fast -b 512k -minrate 512k -maxrate 512k -bufsize 512k -threads 0 -f mp4 news.mp4 The default audio track come with the label "English" and I would like to give it a label "Sinhalese" The Second Audio track come up without a label as "track#1" and I would like to give that a label of "Tamil". How do I do that ?

    Read the article

  • Need to get a file written to a floppy.

    - by dboarman-FissureStudios
    I asked this question over on SO. I have tried dd if=kernel.sys of=/dev/fd0 bs=512 seek=1 to get this file to write to the floppy. It is a kernel shell that must be written to the sector immediately following the bootsector of a disk to boot the PC. No matter what I've tried, for some reason, kernel.sys is not writing to the floppy. I know the bootstrap loader is being written and executed. However, it cannot find the kernel to load the shell. Any ideas on what I am doing wrong? I mean, really, how is it so difficult to get this file written to a floppy? OpenSUSE 11.2

    Read the article

  • How reliable is HDD SMART data?

    - by andahlst
    Based on SMART data, you can judge the health of a disk, at least that is the idea. If I, for instance, run sudo smartctl -H /dev/sda on my ArchLinux laptop, it says that the hard drive passed the self tests and that it should be "healthy" based on this. My question is how reliable this information is, or more specifically: If according to the SMART data this disk is healthy, what are the odds of the disk suddenly failing despite this? This assumes the failure is not due to some catastrophic event that impossibly could have been predicted, such as the laptop falling down on the floor causing the drive heads to hit the disk. If the SMART data does not say the disk is in good shape, what are the odds of the disk failing within some amount of time? Is it possible that there will be false positives and how common are these? Of course, I keep backups no matter what. I am mostly curious.

    Read the article

  • Are these components compatible and are there any significant bottlenecks?

    - by Tom Gullen
    I'm trying to buy a new pc, for software dev and a bit of gaming. I already have a 500gb HDD , and a PCI sound card I want to use as well. Is all this stuff compatible, and will it all work together and are there any significant bottlenecks? Case, Mobo and PSU "Primo Motion" AMD 880G DDR3 Ready Barebones (Socket AM3) http://www.overclockers.co.uk/showproduct.php?prodid=FS-268-OK&groupid=43&catid=1817&subcat= SSD 64GB Crucial RealSSD C300 64GB 2.5" SATA 6Gb/s Solid State Hard Drive http://www.overclockers.co.uk/showproduct.php?prodid=HD-007-CR&groupid=1657&catid=1660&subcat=1668 CPU AMD Phenom II X6 Six Core 1090T Black Edition 3.20GHz (Socket AM3) http://www.overclockers.co.uk/showproduct.php?prodid=CP-266-AM&groupid=701&catid=6&subcat=1944 RAM 8GB Corsair Vengeance 8GB (2x4GB) DDR3 PC3-15000C9 1866MHz Dual Channel Kit http://www.overclockers.co.uk/showproduct.php?prodid=MY-292-CS&groupid=701&catid=8&subcat=1387 Graphics XFX ATI Radeon HD 5770 1024MB GDDR5 PCI-Express Graphics Card http://www.overclockers.co.uk/showproduct.php?prodid=GX-149-XF

    Read the article

  • How to prevent unison syncronize file when file process uploading

    - by user134600
    I use CentOS 5.8 Final. My situation is I running unison with cron where script below : */1 * * * * /usr/bin/unison /dev/null 2&1 and default profile like below : root = /var/www root = ssh://web02.example.com//var/www auto=true batch=true confirmbigdel=true fastcheck=true group=true owner=true prefer=newer silent=true times=true So in every minutes will syncronized www folder . My problem are : I upload file with size bigger than 10 MB to www from client with user1 permission where www folder is user1 owner. file in processing uploading then unison running in that minute and suddenly file upload owner changed to root:root When I editing file in www folder then I save when unison running, file owner changed to root:root where should be user1:user1 Is there anyone know about this problem?

    Read the article

  • Multiple client connecting to master MySQL over SSL

    - by Bastien974
    I successfully configured a MySQL replication over SSL between 2 servers accross the internet. Now I want a second server in the same location as the replication slave, to open a connection to the master db over ssl. I used the same command found here http://dev.mysql.com/doc/refman/5.1/en/secure-create-certs.html to generate a new set of client-cert.pem and client-key.pem with the same master db ca-cert/key.pem and I also used a different Common Name. When I try to initiate a connection between this new server and the master db, it fails : mysql -hmasterdb -utestssl -p --ssl-ca=/var/lib/mysql/newcerts/ca-cert.pem --ssl-cert=/var/lib/mysql/newcerts/client-cert.pem --ssl-key=/var/lib/mysql/newcerts/client-key.pem ERROR 2026 (HY000): SSL connection error It's working without SSL.

    Read the article

  • Canot send SMS using gammu-smsd

    - by khalid hussain
    I am trying to send SMS using gammu-smsd, but it does not work. Modem: Huawei E1550 Steps: #vi /etc/gammu-smsdrc port= /dev/ttyUSB0 connection = at Then restarted gammu-smsd: # /etc/init.d/gammu-smsd restart SMS Sending test echo "Test message" | gammu-smsd-inject TEXT 335123456 It does not send SMS. Log Sep 27 14:19:25 Dell-Laptop gammu-smsd[10285]: Going to 30 seconds sleep because of too much connection errors Sep 27 14:19:55 Dell-Laptop gammu-smsd[10285]: Starting phone communication... Sep 27 14:19:55 Dell-Laptop gammu-smsd[10285]: Error at init connection: Error opening device, it doesn't exist. (DEVICENOTEXIST[4])

    Read the article

  • Difference between sending data via UDP in Bash and with a Python script

    - by Kevin Burke
    I'm on a Centos box, trying to send a UDP packet to port 8125 on localhost. When I run this Python script: import socket sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM) sock.sendto('blah', ("127.0.0.1", 8125)) The data appears where it should on port 8125. However when I send the data like this: echo "blah" | nc -4u -w1 127.0.0.1 8125 Or like this: echo "blah" > /dev/udp/127.0.0.1/8125 The data does not appear in the backend. I know this is horribly vague but it's UDP and it's hard to determine why one packet is being sent and the other is not. Do you have any ideas about how to debug this issue further? I'm on a Centos machine.

    Read the article

  • Weird behaviour with OpenVPN: can not connect to a few websites

    - by Gaby Solis
    My OpenVPN server is Ubuntu 10.04.4 LTS and openvpn version is 2.x My client is on Win 7. He can access most sites but not Youtube, Facebook, Twitter, groups.google.com, etc My server.conf is: local x.x.x.x port 1194 proto udp dev tun ca /etc/openvpn/keys/ca.crt cert /etc/openvpn/keys/server.crt key /etc/openvpn/keys/server.key dh /etc/openvpn/keys/dh1024.pem server 10.8.0.0 255.255.255.0 push "redirect-gateway def1" push "dhcp-option DNS 8.8.8.8" client-to-client keepalive 10 120 comp-lzo persist-key persist-tun status /etc/openvpn/keys/openvpn-status.log verb 4 I can access Youtube etc using SSH Tunnel + SOCKS Proxy, and the Ubuntu server can access all sites. so nothing is wrong with the Ubuntu server. With little information I can provide, I am not looking for a quck solution. How can I debug?

    Read the article

  • What is auto-mounting my media volume?

    - by user285277
    Something is repeatedly mounting my "media" share, doing something with it, then quietly un-mounting it with no notifications at the user level. from the little I can gleaned from the console messages below, I thought I'd managed to stop it, if not understand it last night when I followed instructions for deleting all traces of the Google Update Daemon. I've not been using any Google apps whatsoever, so I was surprised to see that in Console. What's more surprising, and perhaps a little distressing, is that the same thing occurred this evening, when the Google Daemon is long gone. I don't have that log because I can't recall precisely what time it occurred. I'll do a search and provide it if you wish, though. In the meantime, any help with this would be extremely appreciated. I've asked over at Apple Discussions but I think it might be a little deeper than those manning the boards this weekend are comfortable with. It's certainly beyond my meager skills. With apologies in advance if this is more lines thank you need. Please note that I've transformed the Google links a little because the forum here requires more reputation points before one can post more than two links. 12/27/13 10:47:31.000 PM kernel[0]: memorystatus_thread: idle exiting pid 53629 [distnoted] 12/27/13 10:48:10.433 PM com.apple.Preview.TrustedBookmarksService[53640]: Failed to resolve bookmark data at index: 0; not stale; error: The file doesn’t exist. 12/27/13 10:48:10.434 PM com.apple.Preview.TrustedBookmarksService[53640]: Failed to resolve bookmark data at index: 1; not stale; error: The file doesn’t exist. 12/27/13 10:48:10.950 PM com.apple.SecurityServer[17]: Session 103257 created 12/27/13 10:48:34.328 PM com.apple.Preview.TrustedBookmarksService[53640]: Failed to resolve bookmark data at index: 2; not stale; error: The file doesn’t exist. 12/27/13 10:48:34.000 PM kernel[0]: AFP_VFS afpfs_mount: /Volumes/Media Archive-1, pid 53641 12/27/13 10:48:34.000 PM kernel[0]: AFP_VFS afpfs_mount : succeeded on volume 0xffffff80d6355008 /Volumes/Media Archive-1 (error = 0, retval = 0) 12/27/13 10:49:32.000 PM kernel[0]: wlEvent: en0 en0 Link DOWN virtIf = 0 12/27/13 10:49:32.000 PM kernel[0]: AirPort: Link Down on en0. Reason 8 (Disassociated because station leaving). 12/27/13 10:49:32.000 PM kernel[0]: en0::IO80211Interface::postMessage bssid changed 12/27/13 10:49:33.681 PM configd[16]: network changed: v4(en0-:10.0.1.12) DNS- Proxy- SMB 12/27/13 10:49:33.697 PM configd[16]: network changed: DNS* Proxy 12/27/13 10:49:35.475 PM KernelEventAgent[57]: tid 00000000 received event(s) VQ_NOTRESP (1) 12/27/13 10:49:35.000 PM kernel[0]: ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0xffffff802176b4a0 12/27/13 10:49:35.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect started /Volumes/Media Archive-1 prevTrigger 0 currTrigger 1 12/27/13 10:49:35.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: doing reconnect on /Volumes/Media Archive-1 12/27/13 10:49:35.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: posting to KEA EINPROGRESS for /Volumes/Media Archive-1 12/27/13 10:49:35.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: Max reconnect time: 600 secs, Connect timeout: 15 secs for /Volumes/Media Archive-1 12/27/13 10:49:35.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Media Archive-1 12/27/13 10:49:35.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect on /Volumes/Media Archive-1 failed 65. 12/27/13 10:49:35.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: sleep for 1 seconds and then try again 12/27/13 10:49:35.479 PM KernelEventAgent[57]: tid 00000000 type 'afpfs', mounted on '/Volumes/Media Archive-1', from '//Me@Capsule._afpovertcp._tcp.local/Media%20Archive', not responding 12/27/13 10:49:35.487 PM KernelEventAgent[57]: tid 00000000 found 1 filesystem(s) with problem(s) 12/27/13 10:49:36.692 PM com.bourgeoisbits.cloak.agent[14503]: NetworkProfile: (null), (null), (null) (Connected: NO, Airport: NO, Open: NO) [trusted] 12/27/13 10:49:36.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Media Archive-1 12/27/13 10:49:36.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect on /Volumes/Media Archive-1 failed 65. 12/27/13 10:49:36.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: sleep for 2 seconds and then try again 12/27/13 10:49:38.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Media Archive-1 12/27/13 10:49:38.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect on /Volumes/Media Archive-1 failed 65. 12/27/13 10:49:38.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: sleep for 4 seconds and then try again 12/27/13 10:49:41.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=53662[GoogleSoftwareUp] clearing CS_VALID 12/27/13 10:49:42.102 PM GoogleSoftwareUpdateDaemon[53663]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending: com.google.Keystone.Daemon.UpdateEngine: 2 connection(s) com.google.Keystone.Daemon.Administration: 0 connection(s) 12/27/13 10:49:42.113 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateEngine updateProductID:] KSUpdateEngine updating product ID: "com.google.Keystone" 12/27/13 10:49:42.116 PM GoogleSoftwareUpdateDaemon[53663]: -[KSCheckAction performAction] KSCheckAction checking 1 ticket(s). 12/27/13 10:49:42.121 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {( <KSTicket:0x531870 productID=com.google.Keystone version=1.1.0.3659 xc=<KSPathExistenceChecker:0x5302d0 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/> serverType=Omaha url=htt[PeeEs]://tools.google.com/service/update2 creationDate=2012-08-12 14:47:10 > )} Using server: <KSOmahaServer:0x534340 engine=<KSDaemonUpdateEngine:0x52e530> params={ EngineVersion = "1.1.0.3659"; ActivesInfo = { "com.google.talkplugin" = { LastRollCallPingDate = 2013-10-06 07:00:00 +0000; }; "com.google.Keystone" = { LastRollCallPingDate = 2013-10-06 07:00:00 +0000; LastActivePingDate = 2013-10-06 07:00:00 +0000; LastActiveDate = 2013-12-28 03:49:42 +0000; }; "com.google.picasa" = { LastActiveDate = 2012-08-29 10:15:42 +0000; }; }; UserInitiated = 0; IsSystem = 1; OmahaOSVersion = "10.8.5_i486"; Identity = KeystoneDaemon; AllowedSubdomains = ( ".omaha.sandbox.google.com", ".tools.google.com", ".www.google.com", ".corp.google.com" ); } > 12/27/13 10:49:42.130 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x1a31a90 server=<KSOmahaServer:0x534340> url="htt[PeeEs]://tools.google.com/service/update2" runningFetchers=0 tickets=1 activeTickets=1 rollCallTickets=1 body= <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <o:gupdate xmlns:o="htt[Pee]://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1"> <o:os platform="mac" version="MacOSX" sp="10.8.5_i486"></o:os> <o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="502" brand="GGLG"> <o:ping r="82" a="82"></o:ping> <o:updatecheck></o:updatecheck> </o:app> </o:gupdate> > 12/27/13 10:49:42.291 PM GoogleSoftwareUpdateDaemon[53663]: -[KSOutOfProcessFetcher(PrivateMethods) helperDidTerminate:] The Internet connection appears to be offline. [NSURLErrorDomain:-1009] 12/27/13 10:49:42.291 PM GoogleSoftwareUpdateDaemon[53663]: -[KSServerUpdateRequest(PrivateMethods) fetcher:failedWithError:] KSServerUpdateRequest fetch failed. (productIDs: com.google.Keystone) [com.google.UpdateEngine.CoreErrorDomain:702 - 'htt[PeeEs]://tools.google.com/service/update2'] (The Internet connection appears to be offline. [NSURLErrorDomain:-1009]) 12/27/13 10:49:42.292 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )} 12/27/13 10:49:42.295 PM GoogleSoftwareUpdateDaemon[53663]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch. 12/27/13 10:49:42.295 PM GoogleSoftwareUpdateDaemon[53663]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply. 12/27/13 10:49:42.296 PM GoogleSoftwareUpdateDaemon[53663]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply. 12/27/13 10:49:42.299 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete. 12/27/13 10:49:42.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Media Archive-1 12/27/13 10:49:42.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect on /Volumes/Media Archive-1 failed 65. 12/27/13 10:49:42.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: sleep for 8 seconds and then try again 12/27/13 10:49:43.152 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateEngine updateAllProducts] KSUpdateEngine updating all installed products. 12/27/13 10:49:43.153 PM GoogleSoftwareUpdateDaemon[53663]: -[KSCheckAction performAction] KSCheckAction checking 2 ticket(s). 12/27/13 10:49:43.158 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {( <KSTicket:0x18367a0 productID=com.google.Keystone version=1.1.0.3659 xc=<KSPathExistenceChecker:0x1837e10 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/> serverType=Omaha url=htt[PeeEs]://tools.google.com/service/update2 creationDate=2012-08-12 14:47:10 >, <KSTicket:0x1834750 productID=com.google.talkplugin version=4.7.0.15362 xc=<KSPathExistenceChecker:0x1833890 path=/Library/Application Support/Google/GoogleTalkPlugin.app> serverType=Omaha url=htt[PeeEs]://tools.google.com/service/update2 creationDate=2012-08-12 14:47:10 > )} Using server: <KSOmahaServer:0x52e930 engine=<KSDaemonUpdateEngine:0x52e530> params={ EngineVersion = "1.1.0.3659"; ActivesInfo = { "com.google.talkplugin" = { LastRollCallPingDate = 2013-10-06 07:00:00 +0000; }; "com.google.Keystone" = { LastRollCallPingDate = 2013-10-06 07:00:00 +0000; LastActivePingDate = 2013-10-06 07:00:00 +0000; LastActiveDate = 2013-12-28 03:49:42 +0000; }; "com.google.picasa" = { LastActiveDate = 2012-08-29 10:15:42 +0000; }; }; UserInitiated = 0; IsSystem = 1; OmahaOSVersion = "10.8.5_i486"; Identity = KeystoneDaemon; AllowedSubdomains = ( ".omaha.sandbox.google.com", ".tools.google.com", ".www.google.com", ".corp.google.com" ); } > 12/27/13 10:49:43.159 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x53a210 server=<KSOmahaServer:0x52e930> url="htt[PeeEs]://tools.google.com/service/update2" runningFetchers=0 tickets=2 activeTickets=1 rollCallTickets=2 body= <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <o:gupdate xmlns:o="htt[Pee]://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1"> <o:os platform="mac" version="MacOSX" sp="10.8.5_i486"></o:os> <o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="502" brand="GGLG"> <o:ping r="82" a="82"></o:ping> <o:updatecheck></o:updatecheck> </o:app> <o:app appid="com.google.talkplugin" version="4.7.0.15362" lang="en-us" installage="502" brand="GGLG"> <o:ping r="82"></o:ping> <o:updatecheck></o:updatecheck> </o:app> </o:gupdate> > 12/27/13 10:49:43.243 PM GoogleSoftwareUpdateDaemon[53663]: -[KSOutOfProcessFetcher(PrivateMethods) helperDidTerminate:] The Internet connection appears to be offline. [NSURLErrorDomain:-1009] 12/27/13 10:49:43.243 PM GoogleSoftwareUpdateDaemon[53663]: -[KSServerUpdateRequest(PrivateMethods) fetcher:failedWithError:] KSServerUpdateRequest fetch failed. (productIDs: com.google.Keystone, ... (2)) [com.google.UpdateEngine.CoreErrorDomain:702 - 'htt[PeeEs]://tools.google.com/service/update2'] (The Internet connection appears to be offline. [NSURLErrorDomain:-1009]) 12/27/13 10:49:43.244 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )} 12/27/13 10:49:43.247 PM GoogleSoftwareUpdateDaemon[53663]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch. 12/27/13 10:49:43.248 PM GoogleSoftwareUpdateDaemon[53663]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply. 12/27/13 10:49:43.248 PM GoogleSoftwareUpdateDaemon[53663]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply. 12/27/13 10:49:43.250 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete. 12/27/13 10:49:45.570 PM GoogleSoftwareUpdateDaemon[53663]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending: com.google.Keystone.Daemon.UpdateEngine: 1 connection(s) com.google.Keystone.Daemon.Administration: 0 connection(s) 12/27/13 10:49:50.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Media Archive-1 12/27/13 10:49:50.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect on /Volumes/Media Archive-1 failed 65. 12/27/13 10:49:50.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: sleep for 10 seconds and then try again 12/27/13 10:49:53.828 PM KernelEventAgent[57]: tid 00000000 unmounting 1 filesystems 12/27/13 10:49:53.000 PM kernel[0]: AFP_VFS afpfs_unmount: /Volumes/Media Archive-1, flags 524288, pid 57 12/27/13 10:49:54.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: get the reconnect token 12/27/13 10:49:54.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: GetReconnectToken failed 32 /Volumes/Media Archive-1 12/27/13 10:49:54.000 PM kernel[0]: AFP_VFS afpfs_unmount : afpfs_DoReconnect sent signal for unmount to proceed 12/27/13 10:50:12.104 PM GoogleSoftwareUpdateDaemon[53663]: -[KeystoneDaemon main] GoogleSoftwareUpdateDaemon inactive, shutdown. 12/27/13 10:50:29.396 PM Dock[93157]: no information back from LS about running process

    Read the article

  • How to burn a CD-ROM from a Mac for Solaris

    - by cope360
    I would like to burn a CD using a Mac (10.5) which I can then access from a Solaris 10 x86 machine. This partially works: Insert blank CD and let the Finder open it so it creates a "Recordable CD" window for it. Drag the files to be burned into the "Recordable CD" window Burn (there are no options except for speed) Then to mount in Solaris: mount -f hsfs -o ro /dev/dsk/foo /mnt/bar The problem here is that Solaris will see all the filenames as lower case and it will only allow each file name to contain one period (these are HSFS limitations). My guess is that the Mac is not burning the disc with the Rock Ridge extensions that allow for the full file names to be preserved. Is there some combination of burning tools/options and mount options that will make this work?

    Read the article

  • How to do a hexdump of first track of HDD?

    - by Daniel Gratz
    How would i do a hexdump in Ubuntu for the first track of a HDD? I am looking for a winhex-esque output if that makes sense. The first track has 63 sectors, each 512 bytes long. I tried dd if=/dev/sda bs=1 count=512 | hexdump -C but that only gave me what appears to be the MBR, or first sector of the HDD. I guess i am confused about what bs and count should be. Bs means how many bytes to display and count is how many multiples of bs? Thanks!

    Read the article

  • How can I limit the upload/download bandwidth on my CentOS server?

    - by Dan Nestor
    How can I limit the upload and download bandwidth on my CentOS server? This is a box with a single interface, eth0. Ideally, I would like a command-line solution (I've been trying to use tc), something that I could easily switch on and off in a script. So far I've been trying to do something like tc filter add dev eth0 protocol ip prio 50 u32 police rate 100kbit burst 10240 drop but I'm obviously missing a lot of knowledge and information. Can somebody help with a quick one-liner? Many thanks, Dan

    Read the article

  • How can I upgrade PHP on Windows 7?

    - by jasondavis
    I am currently running Xampp for a dev server on Windows 7. It has Apache, PHP,MySQL and some other stuff all in one simple exe package for windows and works great. My version currently has PHP version 5.2.9 and the new version of Xampp comes with PHP 5.3.1 I would like to use the newer PHP but I do not want to update everything else. So how would I install the newest version of PHP in windows? Also on the Xampp page there is another extension download for Tomcat 6.0.20 I am not sure what Tomcat does can someone explain?

    Read the article

  • django fcgi - call a management command with subprocess.Popen

    - by user41855
    Hi, I'm using an app called django-chronograph. It has a code of line which works in my dev environment and does not work in production: p = subprocess.Popen(['python', get_manage_py(), 'run_job', str(self.pk)]) This line crashes in production with: unknown command run_job Whereas when I run directly from command line: manage.py run_job It works fine. Interestingly it worked once when we exchanged 'python' with 'usr/bin/python'. then we restarted the server once more and it was back to old behaviour. Thus it seems as we have a python path issue. I'm not the guy who is running the server, its my app that should run and it would be great to get some help here. Attention: I'm a total noob regarding server-administration.. server environment: NGINX with FCGI-Daemon FCGI in prefork-mode

    Read the article

< Previous Page | 534 535 536 537 538 539 540 541 542 543 544 545  | Next Page >