Search Results

Search found 20663 results on 827 pages for 'multiple inheritance'.

Page 538/827 | < Previous Page | 534 535 536 537 538 539 540 541 542 543 544 545  | Next Page >

• Route an IP from WAN to a host on LAN on OpenWRT

  - by Zsub

  EDIT: I know how to use NAT, I specifically want the server to be reachable on two IP's, one private, one public, with the firewall of the OpenWRT in between, if feasible. At the office we have recieved a /29 from our ISP. The first address is reserved for their endpoint, so I'm free to use five addresses. We run a local network, so of course there is a router in between running OpenWRT to provide all hosts with (W)LAN (dhcp from a private range). However, we also have a server running OS X Server 10.6 (Snow Leopard) and I'd like that server to be accessible both from the LAN using a private IP as well as from the WAN on it's own public IP. Point of note is that the server only has one network port, so multiple NICs is not an option, unfortunately. How would I go about doing this?

  Read the article

• How do you get better working conditions? [closed]

  - by 0A0D

  I work at a business who has a software side and manufacturing side. The software we write is sold as a package along with other hardware that our customers purchase. I basically work in a warehouse. There is one door that seperates the engineers from the warehouse noise. I have asked for noise cancelling walls to be put in. I have asked multiple times over 6 months to be moved up front to one of two vacant sales offices, but they seem reluctant to let an Engineer move into a sales office. In fact, sales are the only ones with windows and they get commission though they make mistakes or overpromise to the customer. So, my question is how can I get better working conditions without necessarily having to leave my current job? It is very hard to work and concentrate. UPDATE I think I can finally close this chapter in my life. I have moved on to a large corporation which follows CMMI religiously and has even started using Agile in many of its projects. Nevertheless, there is organization, respect, and genuine care for the engineers and scientists that work for them. Pierre was right - quitting was the right answer. My life does not nearly have the amount of stress it used to have because I now work for a place that is organized and knows what it wants its engineers to do along with treating them like they should be treated.

  Read the article

• alt+tab moves windows between workspaces and crashes unity

  - by Ruslanchik

  I have recently been using multiple workspaces in unity but have run into a bug that is making it very difficult to do this effectively. The problem is with alt+tab. When I am focused on a window that is not in the primary (top-left) workspace one of two things happens: Unity restarts (the launcher and menu bar disappear and screen flashes blank before everything reappears) and all of my windows are moved to different workspaces. The focused window is always moved to the primary workspace and other windows are typically moved one workspace to the left. alt+tab will usually function normally after this. Unity completely crashes. The windows in the current workspace are still there, but the launcher and menu bar are gone, I cannot switch between workspaces, and none of the hotkeys work. The same issues occur when using alt+` as well. I have installed ccsm, but have made only minor adjustments with it. I am still using the Unity switcher. I actually uninstalled ccsm hoping that would resolve the issue, but the issue persists. Is there some resolution to this issue? I like Unity and want to keep using it, but having to use the mouse to switch between programs is irritating and enough reason to switch to Gnome.

  Read the article

• Raspberry Pi Now Shipping with 512MB RAM; Still Only $35

  - by Jason Fitzpatrick

  Fans of the tiny Raspberry Pi will be pleased to hear the new version of their Model B board now ships with 512MB of RAM (up from the previous 256MB). The best part about the upgrade? The price point stays at $35 a board. From the official Raspberry Pi blog: One of the most common suggestions we’ve heard since launch is that we should produce a more expensive “Model C” version of Raspberry Pi with extra RAM. This would be useful for people who want to use the Pi as a general-purpose computer, with multiple large applications running concurrently, and would enable some interesting embedded use cases (particularly using Java) which are slightly too heavyweight to fit comfortably in 256MB. The downside of this suggestion for us is that we’re very attached to $35 as our highest price point. With this in mind, we’re pleased to announce that from today all Model B Raspberry Pis will ship with 512MB of RAM as standard. If you have an outstanding order with either distributor, you will receive the upgraded device in place of the 256MB version you ordered. Units should start arriving in customers’ hands today, and we will be making a firmware upgrade available in the next couple of days to enable access to the additional memory. We’re excited to get our hands on a new board and try out Raspbmc with that extra RAM. HTG Explains: What is the Windows Page File and Should You Disable It? How To Get a Better Wireless Signal and Reduce Wireless Network Interference How To Troubleshoot Internet Connection Problems

  Read the article

• Visual Studio 2010 Pro Power Tools Screencast

  - by Steve Michelotti

  Microsoft just released the Visual Studio 2010 Pro Power Tools extension and it is awesome. A summary of all the features can be found here and it is available in the Visual Studio Gallery here. There are a bunch of great features but, in my opinion, the best one is the replacement for the Add Reference dialog. This gives sub-string search capabilities as well as the ability to add multiple references without having to continually re-open the dialog. For this feature alone, you should install the Pro Power Tools right now. There are a few blogs posts that do a good job describing all the features but what I wanted to do here was to post a quick screencast (7 minutes) that shows the features that I think are really cool. I show most (but not all) of the features focusing on the ones I think are the best. The features I cover are: Installation with the Extension Manager Add Reference Dialog replacement Tab Well including pinned tabs, pinned tabs in second row, fixed close button, colorized tabs, dirty indicator Highlight current line Triple Click for full-line selection Ctrl + Click for Go To Definition Colorized Parameter Help Enjoy! (Right-click and Zoom to view in full screen)

  Read the article

• Is there any research out there on geographic differences in work environments (e.g., respect) for programmers?

  - by Ethel Evans

  One thing I've learned from this website is that software developers are not treated the same as what I've seen in the companies I've worked at, and some of the differences seem to be related to the culture or other factors of the geographical location where the programmer works. In some areas, it seems like programmers can expect many perks and a great deal of professional respect, but in others it sounds like programmers are seen as laborers who are told what to do and then should go do it without question. Even in just the USA, there seem to be major differences in "the norm" between the various regions of this country. I'm wondering how much of this is just my perception, and how much is real differences about how programmers are perceived in their different locations. Is there any research out there discussing major differences in programmer work environments or attitudes about how to treat or respect programmers by geography? I'd be interested in multiple articles tackling different ways of looking at this. Edit: Research, specifically, doesn't seem to be available, so I'm making the question broader. Any good, thoughtful writing on the topic of any kind available?

  Read the article

• Script or Utility to convert .nab to .csv without importing double entries in Outlook.

  - by Chris

  Currently our environment is migrating from Groupwise 7 to Outlook 2003 and we have multiple users with mission critical outside contacts in their frequent contacts that will have to be imported in Outlook. Currently our only solution is to export GW contacts to a .nab, import to excel to scrub out the contacts in our own domain (to avoid double entry) and convert to .csv. This current solution will require a lot of man hours for hand holding because most of our users are not technically savvy AT ALL and are frankly too busy to do this themselves. Anyone know of any kind of tool or script to assist with this?

  Read the article

• Full Backup & Restore for Windows Vista

  - by Thomas Matthews

  I'm looking for a freeware or low cost application that will backup everything, including registry on Windows Vista Home Premium and to restore from a CDROM disk. The destination is an external hard drive on USB 2.0. Searching on SuperUser and Stack Overflow show articles, but don't mention full backup of the registry and complete restore using CDROM. I would also like to have compressed output and incremental backups. One article mentions CloneZilla, but their web page says that the incremental feature is not supported. I am using Windows Vista Home Premium, Service Pack 1. I need to backup 200 GB onto a 230 GB drive and would like to have multiple backups (thus the need for compression). Other requirements: Single file restore Quality is more important than performance. Application must run on Windows Vista. Extra: Run as daemon or background task on 4 user system. Thanks

  Read the article

• Going on 15 months for me...

  - by Ratman21

  About 5 face to face interviews, 4 telephone ones and except for the two weeks Census Job. But, after 15 months looking for work, I am still with out a JOB. What is wrong here or with me? Let’s see, hard worker (check), self motivated to do well on a Job (Check), Certified CompTIA A+, Security+  and Network+ Technician (Check), 20 + years experience in “IT” (CHECK), in good health, in 20 years of work only 15 days off due to health issues (Check), 18 years experience as technical Help Desk support (Check), can still work better than younger personal (Check), Strong trouble shooting skills for software, computer hard ware and circuit issues (Check) and Multiple software languages (Hey I have done some programming) Check. Hmm I don’t see any problem with me (of course I could have missed something, please let me know if you see what I am missing).    Now as to what have I been up to since I last blogged. The same things of course, Job hunting, job hunting and study.   I have set up sim of my home LAN and will be adding a wireless print server to the sim and in real life, soon.  I was able to pull up and copy the examples of Cisco router commands that I had on my old lap top, to my newer PC. Every time I used a new command while working the NOC on my last job.   I would cut and past a copy of the command on the router (and what it did) I was working on.  Along with notes on the problem and commands use for same router. I used these to make documentation for on how to handle these types of issues, for the other Operation Techs. My old notes are helping me in studying for the CCENT test.    As to Love Dare, I think it will take more like 40 weeks, than the 40 days of the book. Yes I am making progress, slow but, it is progress. I will have more on that in my next blog.

  Read the article

• Videos: Getting Started with Java Embedded

  - by Tori Wieldt

  Are you a Java developer? That means you can write applications for embedded processors! There are new six new videos up on the YouTube/Java channel that you can watch to get more information. To get an overview, watch James Allen of Oracle Global Business Development give OTN a tour of the Oracle booth at ARM Techcon. He also explains the huge opportunity for Java in the embedded space. These videos from Oracle Engineering show you how to leverage your knowledge to seamlessly develop in a space that is really taking off. Java SE Embedded Development Made Easy, Part 1 This video demonstrates how developers already familiar with the Java SE development paradigm can leverage their knowledge to seamlessly develop on very capable embedded processors. Part one of a two-part series. Java SE Embedded Development Made Easy, Part 2 This video demonstrates how developers already familiar with the Java SE development paradigm can leverage their knowledge to seamlessly develop on very capable embedded processors. Part two of a two-part series. Mobile Database Synchronization - Healthcare Demonstration This video demonstrates how a good portion of Oracle's embedded technologies (Java SE-Embedded, Berkeley DB, Database Mobile Server) can be applied to a medical application. Tomcat Micro Cluster See how multiple embedded devices installed with Java Standard Edition HotSpot for Armv5/Linux and Apache Tomcat can be configured as a micro cluster. Java Embedded Partnerships Kevin Smith of Oracle Technical Business Development explains what's new for partners and Java developers in the embedded space. Learn how you can start prototyping for Qualcomm's new Orion board before it's available. (Sorry about the video quality, the booth lights were weird.)   Visit the YouTube/Java channel for other great Java videos. <fade to black>

  Read the article

• Can Clojure's thread-based agents handle c10k performance?

  - by elliot42

  I'm writing a c10k-style service and am trying to evaluate Clojure's performance. Can Clojure agents handle this scale of concurrency with its thread-based agents? Other high performance systems seem to be moving towards async-IO/events/greenlets, albeit at a seemingly higher complexity cost. Suppose there are 10,000 clients connected, sending messages that should be appended to 1,000 local files--the Clojure service is trying to write to as many files in parallel as it can, while not letting any two separate requests mangle the same single file by writing at the same time. Clojure agents are extremely elegant conceptually--they would allow separate files to be written independently and asynchronously, while serializing (in the database sense) multiple requests to write to the same file. My understanding is that agents work by starting a thread for each operation (assume we are IO-bound and using send-off)--so in this case is it correct that it would start 1,000+ threads? Can current-day systems handle this number of threads efficiently? Most of them should be IO-bound and sleeping most of the time, but I presume there would still be a context-switching penalty that is theoretically higher than async-IO/event-based systems (e.g. Erlang, Go, node.js). If the Clojure solution can handle the performance, it seems like the most elegant thing to code. However if it can't handle the performance then something like Erlang or Go's lightweight processes might be preferable, since they are designed to have tens of thousands of them spawned at once, and are only moderately more complex to implement. Has anyone approached this problem in Clojure or compared to these other platforms? (Thanks for your thoughts!)

  Read the article

• Apache unable to write to files and folders on Fedora 16

  - by mickburkejnr

  I've recently installed Fedora 16 on a new PC, and I'm intending to use it for developing my websites. I've set up Apache to host multiple development sites on the machine. Right now though, I am trying to install a PHP framework (Symfony2) and I'm unable to install it on to the web server. It comes back with an error saying that it's unable to write to the cache folder on the server. I have checked and modified the folder so that it is writeable, but still the error keeps being displayed? What am I doing wrong?

  Read the article

• Middle tier language for interfacing C/C++ with db and web app

  - by ggkmath

  I have a web application requiring a middle-tier language to communicate between an oracle database and math routines on a Linux server and a flex-based application on a client. I'm not a software expert, and need recommendations for which language to use for the middle-tier. The math routines are currently in Matlab but will be ported to C (or C++) as shared libraries. Thus, by default there's some C or C++ communication necessary. These routines rely on FFTW (www.fftw.org), which is called directly from C or C++ (thus, I don't see re-writing these routines in another language). The middle tier must manage traffic between the client, the math routines, and the Oracle database. The client will trigger the math routines aynchronously, and the results saved in the db and transferred back to the client, etc. The middle-tier will also need to authenticate user accounts/passwords, and send out various administrative emails. Originally I thought PhP the obvious choice, but interfacing asychronously multiple clients with the C or C++ routines doesn't seem straightforward. Then I thought, why not just keep the whole middle tier in C or C++, but I'm not sure if this is done in the industry (C or C++ doesn't seem as web-friendly as other languages). There's always Jave + JNI, but maybe that introduces other complications (not sure). Any feedback appreciated.

  Read the article

• Cannot access personal website from home IP. More details inside.

  - by GX67

  This is a recent problem I've been having. My site can be accessed from almost everywhere else except from my home IP, where I do most of my editing/updating, etc. I've tested my connection from my school's network, a friend's connection from out of state (multiple states), and through a tethered connection with my friend's Android. It works in all those cases, both viewing, accessing the cPanel, and using FTP. Here's the problem that happens to me when I try to view it from my home IP: The page times out in Firefox, IE, and Chrome. Using the cmd, I ran tracert and ping, both as failed attempts. Log here. downforeveryoneorjustme.com says my site is up. So do the other site checkers. I can't access my cPanel or FTP accounts. I can't access the host site. (I use perfectz.info for hosting, and I can't access their site either.) System settings: No firewall enabled. Ports are seemingly properly forwarded. (e.g. The ports are open in the router settings, and are open everywhere else.) I have an email forwarder set up from the cPanel that works just fine. (i.e. I can receive emails sent to that address. If any other information is needed, I'll do my best to provide it. UPDATE @ilhan: I use two things: 1) The site cPanel from in-browser. 2) Dreamweaver CS5 FTP. @Matthias: I tested both, and it passes the dual stack with a 10/10. What should I do then?

  Read the article

• Auto-resize images in Opera

  - by Nick

  Is there a setting that I can configure to automatically scale large images like Firefox does? I'm using Opera 10.53, and when I open a large image in a new tab, it is not scaled at all. I'm on a laptop, so it is hard to view, and when I am viewing multiple images, it is tedious to scale each image down to 20% or whatever fits it best. I found this thread, and for a fleeting moment thought I had found the answer, but apparently not. They just told the poster to manually resize. Thanks.

  Read the article

• How to do a multishot in xna?

  - by DeVonte

  I am trying to simulate a gun in which shoots multiple bullets at the same time(similar to a spread out shot). I am thinking I have to create another bullet array then do the same as I have below but in a different direction. Here is what I have so far: foreach (GameObject bullet in bullets) { // Find a bullet that isn't alive if (!bullet.alive) { //And set it to alive bullet.alive = true; if (flip == SpriteEffects.FlipHorizontally) //Facing right { float armCos = (float)Math.Cos(arm.rotation - MathHelper.PiOver2); float armSin = (float)Math.Sin(arm.rotation - MathHelper.PiOver2); // Set the initial position of our bullets at the end of our gun arm // 42 is obtained by taking the width of the Arm_Gun texture / 2 // and subtracting the width of the Bullet texture / 2. ((96/2)=(12/2)) bullet.position = new Vector2( arm.position.X + 42 * armCos, arm.position.Y + 42 * armSin); // And give it a velocity of the direction we're aiming. // Increae/decrease speed by changeing 15.0f bullet.Velocity = new Vector2( (float)Math.Cos(arm.rotation - MathHelper.PiOver4 + MathHelper.Pi + MathHelper.PiOver2), (float)Math.Sin(arm.rotation - MathHelper.PiOver4 + MathHelper.Pi + MathHelper.PiOver2)) * 15.0f; } else //Facing left { float armCos = (float)Math.Cos(arm.rotation + MathHelper.PiOver2); float armSin = (float)Math.Sin(arm.rotation + MathHelper.PiOver2); //Set the initial position of our bullet at the end of our gun arm //42 is obtained be taking the width of the Arm_Gun texture / 2 //and subtracting the width of the Bullet texture / 2. ((96/2)-(12/2)) bullet.position = new Vector2( arm.position.X - 42 * armCos, arm.position.Y - 42 * armSin); //And give it a velocity of the direction we're aiming. //Increase/decrease speed by changing 15.0f bullet.Velocity = new Vector2( -armCos, -armSin) * 15.0f; } return; }// End if }// End foreach

  Read the article

• Logging in with a different password than the database password, PHPMyAdmin

  - by Andrew M

  I am trying to install PHPMyAdmin on my server to manage my MySQL databases. Right now I have only one I want to add, but I would like to be able to manage multiple databases from the same account on PHPMyAdmin. How would I configure PMA so I could login with "andrew" and a password of "examplepassword" instead of the annoyingly long and unchangeable database user and password I am provided (ie. db3483478234, password of random characters)? I can't seem to find an area to specify a different password than the regular database username and password.

  Read the article

• Can non-IT people handle a wiki?

  - by Andrew Heath

  (I'm hoping that some of you will have encountered this issue before and can offer some insights...) My company is looking to improve their market research data management. Current data management style: "Hey Jimbo, where's that picture of our WhatZit 2.0? "yeah I remember that email about that company from that guy, gimme a few minutes to search my Outlook" "who has the newest copy of the Important Competitor's product catalogue? Mine is from '09." ... "Colleen does, and she's on maternity leave. You'll have to call her to get her workstation password..." Desired data management style: data organized neatly by topic (legal, economic, industrial, competitor) for each topic, multiple media types stored together (company product images, press releases, contact info) but still neatly sorted by type data editing histories communal access (no data silos) I was thinking about setting up a department wiki for all users to access. It seems to satisfy the four criteria above, but I'm a little concerned about how user-friendly (read: decipherable to non-technical people) it is for the more advanced features like image galleries, article formatting, and the like. Has anyone here setup a wiki for non-IT people and had it not catch on fire//become a ghost town//look like Geocities? Bonus question: can you see any obvious drawbacks to my choice of MediaWiki (or any other wiki) for solving this problem? Thank you.

  Read the article

• Generic software code style enforcer

  - by FuzziBear

  It seems to me to be a fairly common thing to do, where you have some code that you'd like to automatically run through a code style tool to catch when people break your coding style guide(s). Particularly if you're working on code that has multiple languages (which is becoming more common with web-language-x and javascript), you generally want to apply similar code style guides to both and have them enforced. I've done a bit of research, but I've only been able to find tools to enforce code style guidelines (not necessarily applying the code style, just telling you when you break code style guidelines) for a particular language. It would seem to me a reasonably trivial thing to do by just using current IDE rules for syntax highlighting (so that you don't check style guide rules inside quotes or strings, etc) and a whole lot of regexes to enforce some really generic things. Examples: if ( rather than if( checking lines with only whitespace Are there any tools that do this kind of really generic style checking? I'd prefer it to be easily configurable for different languages (because like it or not, some things would just not work cross language) and to add new "rules" to check new things.

  Read the article

• Java Applet Tower Defence Game needs tweeking

  - by Ephiras

  Hello :) i have made a tower defence Game for my computer science class as one of my major projects, but have encountered some rather fatal roadblocks. here they are creating a menu screen (class Menu) that can set the total number of enimies, the max number of towers, starting money and the map. i tried creating a constructor in my Main class that sets all the values to whatever the Menu class passes in. I want the Menu screen to close after a difficulty has been selected and the main class to begin. Another problem i would really like some help with is instead of having to write entire arrays i would like to create a small segment of code that runs through an entire picture and sets up an array based on that pixels color.this way i can have multiple levels just dragged into a level folder and have the program read through them. users can even create their own. so a 1 if its yellow, a two if blue and a 3 if purple, then everything else = 0; you can download all the classes and code uif you'd like here sorry about having to redirect you but i wasn't sure how to efficently add a code spoiler. help is greatly appreciated

  Read the article

• CodePlex Daily Summary for Thursday, July 31, 2014

  CodePlex Daily Summary for Thursday, July 31, 2014Popular ReleasesDbEntry.Net (Leafing Framework): DbEntry.Net 4.2: DbEntry.Net is a lightweight Object Relational Mapping (ORM) database access compnent for .Net 4.0+. It has clearly and easily programing interface for ORM and sql directly, and supoorted Access, Sql Server, MySql, SQLite, Firebird, PostgreSQL and Oracle. It also provide a Ruby On Rails style MVC framework. Asp.Net DataSource and a simple IoC. DbEntry.Net.v4.2.Setup.zip include the setup package. DbEntry.Net.v4.2.Src.zip include source files and unit tests. DbEntry.Net.v4.2.Samples.zip ...Recaptcha for .NET: Recaptcha for .NET v1.5: What's NewMinor bug fixes Support for legacy .NET framework 4.0 and ASP.NET MVC 4. Support for .NET Framework 4.5.1.Azure Storage Explorer: Azure Storage Explorer 6 Preview 1: Welcome to Azure Storage Explorer 6 Preview 1 This is the first release of the latest Azure Storage Explorer, code-named Phoenix. What's New?Here are some important things to know about version 6: Open Source Now being run as a full open source project. Full source code on CodePlex. Collaboration encouraged! Updated Code Base Brand-new code base (WPF/C#/.NET 4.5) Visual Studio 2013 solution (previously VS2010) Uses the Task Parallel Library (TPL) for asynchronous background operat...Wsus Package Publisher: release v1.3.1407.29: Updated WPP to recognize the very latest console version. Some files was missing into the latest release of WPP which lead to crash when trying to make a custom update. Add a workaround to avoid clipboard modification when double-clicking on a label when creating a custom update. Add the ability to publish detectoids. (This feature is still in a BETA phase. Packages relying on these detectoids to determine which computers need to be updated, may apply to all computers).VG-Ripper & PG-Ripper: PG-Ripper 1.4.32: changes NEW: Added Support for 'ImgMega.com' links NEW: Added Support for 'ImgCandy.net' links NEW: Added Support for 'ImgPit.com' links NEW: Added Support for 'Img.yt' links FIXED: 'Radikal.ru' links FIXED: 'ImageTeam.org' links FIXED: 'ImgSee.com' links FIXED: 'Img.yt' linksDynamics AX Development tools: Version 1.0.0: Alpha release of the package. I am just combining greate community tools into a package. I have not go through testing every function of the tools. However, feel free to point out if you found any bugs!Asp.Net MVC-4,Entity Framework and JQGrid Demo with Todo List WebApplication: Asp.Net MVC-4,Entity Framework and JQGrid Demo: Asp.Net MVC-4,Entity Framework and JQGrid Demo with simple Todo List WebApplication, Overview TodoList is a simple web application to create, store and modify Todo tasks to be maintained by the users, which comprises of following fields to the user (Task Name, Task Description, Severity, Target Date, Task Status). TodoList web application is created using MVC - 4 architecture, code-first Entity Framework (ORM) and Jqgrid for displaying the data.Waterfox: Waterfox 31.0 Portable: New features in Waterfox 31.0: Added support for Unicode 7.0 Experimental support for WebCL New features in Firefox 31.0:New Add the search field to the new tab page Support of Prefer:Safe http header for parental control mozilla::pkix as default certificate verifier Block malware from downloaded files Block malware from downloaded files audio/video .ogg and .pdf files handled by Firefox if no application specified Changed Removal of the CAPS infrastructure for specifying site-sp...SuperSocket, an extensible socket server framework: SuperSocket 1.6.3: The changes below are included in this release: fixed an exception when collect a server's status but it has been stopped fixed a bug that can cause an exception in case of sending data when the connection dropped already fixed the log4net missing issue for a QuickStart project fixed a warning in a QuickStart projectYnote Classic: Ynote Classic 2.8.5 Beta: Several Changes - Multiple Carets and Multiple Selections - Improved Startup Time - Improved Syntax Highlighting - Search Improvements - Shell Command - Improved StabilityHead First C#: The Quest: The Quest: Stable release of "The Quest" game ( Lab 2 from Head First C#, 3rd edition)TCP/IP Adapter BizTalk 2013: TCPIP Adapter for BizTalk 2013 - Version 1.0: Version 1.0 This is an updated version of the BizTalk 2010 TCP/IP adapter. References have been updated and a new setup (ISLE) has been used. Follow the installation instructions below to install the adapter. Still want to automate step 4, but haven't got to it yet. Installation instructions Make sure to close the BizTalk Administration Console. Just to make sure everything gets refreshed after installation. Download and install the setup. The setup makes sure the adapter will be regis...gicon: gicon HTTP service v1.0.0: core: 1.0.0.26592 service: 1.0.0.27190 Github: http://rynnwang.github.io/gicon/ Github.io: http://rynnwang.github.io/gicon/ Codeplex: http://gicon.codeplex.com .NET required: 2.0 or above. Installation notes: 1. You need to run intallutil command to install ifunction.GuidIconHttpService.exe file as Windows Service 2. You need to update ifunction.GuidIconHttpService.exe.config file in the folder to set correct HTTP URI prefixes. In release zip by default, it is set as http://localhost:20000...TEBookConverter: 1.2: Fixed: Could not start convertion in some cases Fixed: Progress show during convertion was truncated Fixed: Stopping convertion didn't reset program titlenewmail_OutlookCOM: newmail_OutlookCOM: First Stable ReleaseSharePoint - Data View Web Part Documenter: Data View Web Part Documenter 1.0: .NET Framework 4 Client Profile required for this to run on your PC. Please see the documentation for running the tool.LOL zmena skinu klienta: LOL jednoduchý menic skinu klienta: Jednoduchý prográmek, který ušetrí cas pri zmene klienta. Nemusí se proklikáva18541855 adresáru :)SSRS Plus+: Latest - SSRS Plus Application and Source Code: This release contains the Beta version with significant changes in comparison to the old release which I am keeping for legacy reasons. At some point a changeover will be made once it has been confirmed that my branch is stable and Mr Bagwan is in agreement also.CS-Script Source: Release v3.8.4: CSScript.Evaluator is migrated to Mono v3.3.0 Added aggregating //css_ignore_ns from the imported scripts cs-script.7z - CS-Script Suite (binaries, documentation, samples) cs-script.ExtensionPack.7z - CS-Script Extension Pack (additional binaries and samples) cs-scriptDocs.7z - CS-Script DocumentationDotSpatial: DotSpatial 1.7: DotSpatial.Full - includes all DotSpatial libraries, extensions and DemoMap application DotSpatial.Core - includes only DotSpatial core libraries Entire list of changes see in the issue tracker. Main changes: Improved common stability, optimized memory and speed when loading and rendering shapefiles, fixed some memory leaks in rasters and shape layers. Simplified plugin infrastructure. Now there are predefined implementations for all required components (IStatusControl, IDockManager, IHead...New ProjectsBrilliantORM: ????ORM??，??SQL?????????。???????????。Crafter: ?????? ??? ????Dotnetnuke xblog // Blog, Article, Events, Documents: xBlog is a blog program based on DNN, it has powerful functions and unique design style. In addition to article management function which common blog module hasIn Plain Sight: Embedding plain text into an image so one can hide the text "In Plain Sight". A cursory view into the world of Steganography.JS Koans Visual Studio Friendly Version: A Version of JS koans loaded into Visual StudioMy Troop First: just adding to the siteOFX Parser: Biblioteca desenvolvida em C# que traduz arquivos OFX e gera a instância de uma classe que representa o arquivo. Um exemplo de uso está disponível, assim como aOrchard Custom Code module: This module adds a very simple tool to add custom code in front-end pages head and foot.SPB Export to KeePass Import Conversion: A simple script to convert the .xml-file by konste's "SPB Wallet Export" (https://spbwalletexport.codeplex.com/) into an import format accepted by KeePass 2The unTroublemaker: The unTroublemaker is a troubleshooter program that helps your project quickly find and fix missing dependency issues using simple XML-based specifications.

  Read the article

• Switching to workspaces view shows buggy blue background

  - by G1i1ch

  When switching to workspaces view everything the background turns blue. Same happens when I switch between multiple windows of the same app too. Happening after having a try with gnome shell out of curiosity. Installed through official repos like normal. Tried it out but switched back, anyone have an idea of why this is happening? Got an Intel GPU and Unity 3d. If anyone can give me some direction, thanks a lot. Update: Looks like during the switch somehow opengl was disabled. glxinfo returns: name of display: :0 Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Error: couldn't find RGB GLX visual or fbconfig Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". This is very distressing, all I wanted to do was try out gnome3. Does anyone have an idea on how I can get opengl back? [update] Ok I found out what happened. Apparently it's not that hard to accidentally install an nvidia driver. All I had to do was remove all the stuff that had nvidia in it and I got 3d back! For anyone else, this is how I found out: check out Xorg.0.log `$ cat / var/log/Xorg.0.log | more` if you see a line like this somewhere `(EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)` you got an nvidia problem Thanks everyone for trying to help :D

  Read the article

• MvcReportViewer v.0.4.0 is available!

  - by Ilya Verbitskiy

  Originally posted on: http://geekswithblogs.net/ilich/archive/2014/06/04/mvcreportviewer-v.0.4.0-is-available.aspxToday I released new version of MvcReportViewer. This release contains mostly bug fixes reported by library users. I am glad to see that Open Source model works and people try to contribute to the project! Thank you everybody for your bug repots and help with the project. Version 0.4.0 Added support for ASP.NET MVC 5 Removed jQuery dependency. I have not tested it on IE8 or earlier versions. Any help with testing is welcome! Fixed problem with SSRS keep-alive cookies. Keep-alive cookies are issued every time a report is opened during a browser session. Many people don't restart their browsers and in my case, Chrome doesn't get rid of the cookie session data on close - had to manually delete them for the reports to start working again. I added KeepSessionAlive control settings to manage SSRS keep-alive behavior. It is set to false by default to fix Bad Request 400: Request Too Long issue. You can find usage example in Fluent.cshtml. Fixed the bug when ReportViewer Control parameters was not parsed when ShowParameterPrompts parameter had not been set. Changed public static MvcReportViewerIframe MvcReportViewer method to use IEnumerable<KeyValuePair<string, object>> reportParameters instead of simple object. The reason is users reported that they mostly use multiple report parameters’ values. Added support for SSRS hosted on Windows Azure. Users should set MvcReportViewer.IsAzureSSRS property to true in Web.config to use Windows Azure authentication. I do not have Windows Azure SSRS and build the code using http://msdn.microsoft.com/en-us/library/gg552871.aspx#Authentication article. It would be nice if somebody from community tested the change or provided me a test report on Windows Azure for testing purposes.

  Read the article

• Security when, ssh Private keys are lost

  - by Shree Mandadi

  Cant explain my problem enough with words, Let me take an example.. and please multiple the complexity by a 100 for the Solution. User-A has two ssh private keys, and over time has used this public key on a number of servers He lost one of them, and has created a new pair. How does User-A, inform me (Sys Admin), that he has lost his key, and How do I manage all the servers to which he had access to (I do not have a list, of all Servers that User-A has access to). In other words, How do I recall, the public key associated with this Private key. REF: In the LDAP based Authentication, All Servers would communicate with a single Server repository for Authentication, and If I remove acess or modify the password on the Server, all Systems that use this LDAP for Authentication are secured, when User-A loses his password..

  Read the article

• Vim - dynamic list of open buffers in a window

  - by asfallows

  I've investigated a few ways to maintain a list of open buffers in Vim, and some of them are very good, but none of them seem to behave the way I'd like. It's very possible that nothing like what I want exists, and it can't hurt to ask. I've been using NERDTree in GVim, and I like the idea of putting the information in a slender left-hand window. I've put together a handy diagram for how I'd like my environment to look: |--------|---------------------------------------| | | | | | | |NERDTree| Windows | | | | | | | | | | |--------| | | | | | | | | List | | | of | | | Open | | | Buffers| | | | | | | | |--------|---------------------------------------| So my question is: Is there a vim-native or plugin-enabled way to maintain a list of currently open buffers and select/edit/close from that list, inside a window similar to NERDTree? I understand that this approach may be incongruous with the Vim way of doing things, and if you feel like I'm missing something about how to manage multiple files in a Vim session, please leave a comment with suggestions!

  Read the article

< Previous Page | 534 535 536 537 538 539 540 541 542 543 544 545  | Next Page >