Search Results

Search found 22544 results on 902 pages for 'connection closed'.

Page 539/902 | < Previous Page | 535 536 537 538 539 540 541 542 543 544 545 546  | Next Page >

  • Starting over and new to Ubuntu

    - by 2funnyyone
    We have been having repeated problems with our interent service and using windows xp & sp3 (users and premissions) I see no need for them. I started with computers long before windows. Every since sp 3 come out in 2009 I have had nothing but problems. I have lost so many computers to virius and trojans, we just stack them up. We are with Qwest/ Century link which is using advertising servers which I think is causing the problem. All the computers are networked together which is not how I set them up. I beleive Century link is networking them through assignment of a domain for our home. This causes all the computers to crash twice. This is getting expensive. We tried buying new harddrives but reinfect with hours of connecting to internet. I also beleive the modem, router and all computers are infected. I put combofix on this one and that is the only reason we are still online with this laptop. I am afraid to install new equipment because my partner and I are on SSDI and this cost a lot. I go to school at UOP and had to run off a flash and reboot this laptop to recovery every other day or so, this pass month. New plan is: We are getting ready to install new equipment but afraid to reinfect again. Need help to install new equipment. The plan is to use current internet services from Qwest/ now Century Link. The list of New equipment in order: Century link wireless modem is ZyXEL PK5000Z with 4 direct connect Ethernet ports Next Dell Optiplex 210L ( used auction purchase ) 2 gb ram 80 g hard drive Ubuntu 11.10 operating system Next Wireless D-Link router WBR-1310 with 4 direct connect Ethernet ports OK-------- Purchased Dell OEM disk for Repair or Reinstalling Windows XP Professional Operating system (2 roommates as well) All infected computers are Dell desktops or laptops with XP Pro Also purchasing Ubuntu 12.04 for 3 computers. We like the way it runs but still learning it. Questions 1] How do we fdisk the infected computers without infecting new system. We have Dos disks, but none have floppy dish drive. We do have a new floppy disk drive and usb adapter we purchased from Amazon. 2] We are thinking Avast internet security because of the boot scan. We want all software loaded before reconnecting. We can manually load our internet provider information. We purchased StopZilla $100 for 5 computers, but not sure that is what we need. But need how to setup ports security and services we will need. Really lost at this part. So we are safe when we go back on the internet. 3] Want to connect reloaded fdisk systems to router as public connection and no sharing. Do not want to network all computers. 4] Want parental/ ownership control from Ubuntu system for internet connection (Children and friends). Do we restrict at the modem and/ or router? Any help would be a blessing. I do not want to go alone on this anymore.

    Read the article

  • What is a good design pattern / lib for iOS 5 to synchronize with a web service?

    - by Junto
    We are developing an iOS application that needs to synchronize with a remote server using web services. The existing web services have an "operations" style rather than REST (implemented in WCF but exposing JSON HTTP endpoints). We are unsure of how to structure the web services to best fit with iOS and would love some advice. We are also interested in how to manage the synchronization process within iOS. Without going into detailed specifics, the application allows the user to estimate repair costs at a remote site. These costs are broken down by room and item. If the user has an internet connection this data can be sent back to the server. Multiple photographs can be taken of each item, but they will be held in a separate queue, which sends when the connection is optimal (ideally wifi). Our backend application controls the unique ids for each room and item. Thus, each time we send these costs to the server, the server echoes the central database ids back, thus, that they can be synchronized in the mobile app. I have simplified this a little, since the operations contract is actually much larger, but I just want to illustrate the basic requirements without complicating matters. Firstly, the web service architecture: We currently have two operations: GetCosts and UpdateCosts. My assumption is that if we used a strict REST architecture we would need to break our single web service operations into multiple smaller services. This would make the services much more chatty and we would also have to guarantee a delivery order from the app. For example, we need to make sure that containing rooms are added before the item. Although this seems much more RESTful, our perception is that these extra calls are expensive connections (security checks, database calls, etc). Does the type of web api (operation over service focus) determine chunky vs chatty? Since this is mobile (3G), are we better handling lots of smaller messages, or a few large ones? Secondly, the iOS side. What is the current advice on how to manage data synchronization within the iOS (5) app itself. We need multiple queues and we need to guarantee delivery order in each queue (and technically, ordering between queues). The server needs to control unique ids and other properties and echo them back to the application. The application then needs to update an internal database and when re-updating, make sure the correct ids are available in the update message (essentially multiple inserts and updates in one call). Our backend has a ton of business logic operating on these cost estimates. We don't want any of this in the app itself. Currently the iOS app sends the cost data, and then the server echoes that data back with populated ids (and other data). The existing cost data is deleted and the echoed response data is added to the client database on the device. This is causing us problems, because any photos might not have been sent, but the original entity tree has been removed and replaced. Obviously updating the costs tree rather than replacing it would remove this problem, but I'm not sure if there are any nice xcode libraries out there to do such things. I welcome any advice you might have.

    Read the article

  • Should I manage authentication on my own if the alternative is very low in usability and I am already managing roles?

    - by rumtscho
    As a small in-house dev department, we only have experience with developing applications for our intranet. We use the existing Active Directory for user account management. It contains the accounts of all company employees and many (but not all) of the business partners we have a cooperation with. Now, the top management wants a technology exchange application, and I am the lead dev on the new project. Basically, it is a database containing our know-how, with a web frontend. Our employees, our cooperating business partners, and people who wish to become our cooperating business partners should have access to it and see what technologies we have, so they can trade for them with the department which owns them. The technologies are not patented, but very valuable to competitors, so the department bosses are paranoid about somebody unauthorized gaining access to their technology description. This constraint necessitates a nightmarishly complicated multi-dimensional RBAC-hybrid model. As the Active Directory doesn't even contain all the information needed to infer the roles I use, I will have to manage roles plus per-technology per-user granted access exceptions within my system. The current plan is to use Active Directory for authentication. This will result in a multi-hour registration process for our business partners where the database owner has to manually create logins in our Active Directory and send them credentials. If I manage the logins in my own system, we could improve the usability a lot, for example by letting people have an active (but unprivileged) account as soon as they register. It seems to me that, after I am having a users table in the DB anyway (and managing ugly details like storing historical user IDs so that recycled user IDs within the Active Directory don't unexpectedly get rights to view someone's technologies), the additional complexity from implementing authentication functionality will be minimal. Therefore, I am starting to lean towards doing my own user login management and forgetting the AD altogether. On the other hand, I see some reasons to stay with Active Directory. First, the conventional wisdom I have heard from experienced programmers is to not do your own user management if you can avoid it. Second, we have code I can reuse for connection to the active directory, while I would have to code the authentication if done in-system (and my boss has clearly stated that getting the project delivered on time has much higher priority than delivering a system with high usability). Third, I am not a very experienced developer (this is my first lead position) and have never done user management before, so I am afraid that I am overlooking some important reasons to use the AD, or that I am underestimating the amount of work left to do my own authentication. I would like to know if there are more reasons to go with the AD authentication mechanism. Specifically, if I want to do my own authentication, what would I have to implement besides a secure connection for the login screen (which I would need anyway even if I am only transporting the pw to the AD), lookup of a password hash and a mechanism for password recovery (which will probably include manual identity verification, so no need for complex mTAN-like solutions)? And, if you have experience with such security-critical systems, which one would you use and why?

    Read the article

  • When things go awry

    - by Phil Factor
    The moment the Entrepreneur opened his mouth on prime-time national TV, spelled out the URL and waxed big on how exciting ‘his’ new website was, I knew I was in for a busy night. I’d designed and built it. All at once, half a million people tried to log into the website. Although all my stress-testing paid off, I have to admit that the network locked up tight long before there was any danger of a database or website problem. Soon afterwards, the Entrepreneur and the Big Boss were there in the autopsy meeting. We picked through all our systems in detail to see how they’d borne the unexpected strain. Mercifully, in view of the sour mood of the Big Boss, it turned out that the only thing we could have done better was buy a bigger pipe to and from the internet. We’d specified that ‘big pipe’ when designing the system. The Big Boss had then railed at the cost and so we’d subsequently compromised. I felt that my design decisions were vindicated. The Big Boss brooded for a while. Then he made the significant comment: “What really ****** me off is the fact that, for ten minutes, we couldn’t take people’s money.” At that point I stopped feeling smug. Had the internet connection been better, the system would have reached its limit and failed rather precipitously, and that wasn’t what he wanted. Then it occurred to me that what had gummed up the connection was all those images on the site, that had made it so impressive for the visitors. If there had been a way to automatically pare down the site to the bare essentials under stress… Hmm. I began to consider disaster-recovery in the broadest sense – maintaining a service in spite of unusual or unexpected events. What he said makes a lot of sense: sacrifice whatever isn’t essential to keep the core service running when we approach the capacity limits. Maybe in IT we should borrow (or revive) the business concept of the ‘Skeleton service’, maintaining only the priority parts under stress, using a process that is well-prepared and carefully rehearsed. How might this work? Whatever the event we have to prepare for, it is all about understanding the priorities; knowing what one can dispense with when the going gets tough. In the event of database disaster, it’s much faster to deploy a skeletal system with only the essential data than to restore the entire system, though there would have to be a reconciliation process to update the revived database retrospectively, once the emergency was over. It isn’t just the database that could be designed for resilience. One could prepare for unusually high traffic in a website by designing a system that degraded gradually to a ‘skeletal’ site, one that maintained the commercial essentials without fat images, JavaScript libraries and razzmatazz. This is all what the Big Boss scathingly called ‘a mere technicality’. It seems to me that what is needed first is a culture of application and database design which acknowledges that we live in a very imperfect world, and react accordingly when things go awry.

    Read the article

  • Hyper-V for Developers Part 1 Internal Networks

    Over the last year, weve been working with Microsoft to build training and demo content for the next version of Office Communications Server code-named Microsoft Communications Server 14.  This involved building multi-server demo environments in Hyper-V, getting them running on demo servers which we took to TechEd, PDC, and other training events, and sometimes connecting the demo servers to the show networks at those events.  ITPro stuff that should scare the hell out of a developer! It can get ugly when I occasionally have to venture into ITPro land.  Lets leave it at that. Having gone through this process about 10 to 15 times in the last year, I finally have it down.  This blog series is my attempt to put all that knowledge in one place if anything, so I can find it somewhere when I need it again.  Ill start with the most simple scenario and then build on top of it in future blog posts. If youre an ITPro, please resist the urge to laugh at how trivial this is. Internal Hyper-V Networks Lets start simple.  An internal network is one that intended only for the virtual machines that are going to be on that network it enables them to communicate with each other. Create an Internal Network On your host machine, fire up the Hyper-V Manager and click the Virtual Network Manager in the Actions panel. Select Internal and leave all the other default values. Give the virtual network a name, and leave all the other default values. After the virtual network is created, open the Network and Sharing Center and click Change Adapter Settings to see the list of network connections. The only thing I recommend that you do is to give this connection a friendly label, e.g. Hyper-V Internal.  When you have multiple networks and virtual networks on the host machines, this helps group the networks so you can easily differentiate them from each other.  Otherwise, dont touch it, only bad things can happen. Connect the Virtual Machines to the Internal Network Im assuming that you have more than 1 virtual machine already configured in Hyper-V, for example a Domain Controller, and Exchange Server, and a SharePoint Server. What you need to do is basically plug in the network to the virtual machine.  In order to do this, the machine needs to have a virtual network adapter.  If the VM doesnt have a network adapter, open the VMs Settings and click Add Hardware in the left pane.  Choose the virtual network to which to bind the adapter to. If you already have a virtual network adapter on the VM, simply connect it to the virtual network. Assign IP Addresses to the Virtual Machines on the Internal Network Open the Network and Sharing Center on your VM, there should only be 1 network at this time.  Open the Properties of the connection, select Internet Protocol Version 4 (TCP/IPv4) and hit Properties. In this environment, Im assigning IP addresses as 192.168.0.xxx.  This particular VM has an IP address of 192.168.0.40 with a subnet mask of 255.255.255.0, and a DNS Server of 192.168.0.18.  DNS is running on the Domain Controller VM which has an IP address of 192.168.0.18. Repeat this process on every VM in your environment, obviously assigning a unique IP address to each.  In an environment with a domain controller, you should now be able to ping the machines from each other. What Next? After completing this process, heres what you still cannot do: Access the internet from any of the VMs Remote desktop to a VM from the host Remote desktop to a VM over the network In the next post, well take a look configuring an External network adapter on the virtual machines.  Well then build on top of that so that you can RDP into the VMs from the host machine and over the network.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • cannot install firmware-b43-installer

    - by unknown
    output i get when installing the installArchives() failed: Preconfiguring packages ... Preconfiguring packages ... Preconfiguring packages ... Selecting previously deselected package menu. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 216125 files and directories currently installed.) Unpacking menu (from .../menu_2.1.44ubuntu1_i386.deb) ... Selecting previously deselected package wifi-radar. Unpacking wifi-radar (from .../wifi-radar_2.0.s05-1.2_all.deb) ... Processing triggers for man-db ... Processing triggers for install-info ... Processing triggers for doc-base ... Processing 1 added doc-base file(s)... Registering documents with scrollkeeper... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for desktop-file-utils ... Processing triggers for python-gmenu ... Rebuilding /usr/share/applications/desktop.en_US.UTF8.cache... Processing triggers for python-support ... Setting up firmware-b43-installer (4.150.10.5-5) ... --2012-10-26 08:51:30-- http://mirror2.openwrt.org/sources/broadcom-wl-4.150.10.5.tar.bz2 Resolving mirror2.openwrt.org... 46.4.11.11 Connecting to mirror2.openwrt.org|46.4.11.11|:80... failed: Connection refused. dpkg: error processing firmware-b43-installer (--configure): subprocess installed post-installation script returned error exit status 4 No apport report written because MaxReports is reached already Setting up menu (2.1.44ubuntu1) ... Processing triggers for menu ... Setting up wifi-radar (2.0.s05-1.2) ... Processing triggers for menu ... Errors were encountered while processing: firmware-b43-installer Setting up firmware-b43-installer (4.150.10.5-5) ... --2012-10-26 08:51:33-- http://mirror2.openwrt.org/sources/broadcom-wl-4.150.10.5.tar.bz2 Resolving mirror2.openwrt.org... 46.4.11.11 Connecting to mirror2.openwrt.org|46.4.11.11|:80... failed: Connection refused. dpkg: error processing firmware-b43-installer (--configure): subprocess installed post-installation script returned error exit status 4 same thing occurs when i try to install any of the wireless application. All other software installs and the same error when trying to install firmware. I tried to go the link(http://mirror2.openwrt.org/sources/broadcom-wl-4.150.10.5.tar.bz2) and download the package but found no make file found in his package. please help me.

    Read the article

  • Nashorn ?? JDBC ? Oracle DB ?????·?? 2

    - by Homma
    ???? Nashorn ?? JavaScript ??????? JDBC ? Oracle DB ?????????????????????????????????????JDBC ???????????????????????????????? ??????????????????????????? ????? URL ? https://blogs.oracle.com/nashorn_ja/entry/nashorn_jdbc_2 ??? ????????? JDBC ????? ??????????????? ${ORACLE_HOME}/jdbc/lib/ojdbc6.jar ??????????????????????????? JDBC ?????????????? ????? ojdbc6.jar ?????????????? ?????????????????????????????????????? var OracleDataSource = Java.type("oracle.jdbc.pool.OracleDataSource"); var ods = new OracleDataSource(); ods.setURL("jdbc:oracle:thin:test/test@dbsrv:1521:orcl"); var conn = ods.getConnection(); var meta = conn.getMetaData(); print("JDBC driver version is " + meta.getDriverVersion()); ???????? JDBC ?????? jjs ????? -cp ?????????????????????? $ jjs -cp ojdbc6.jar version.js JDBC driver version is 11.2.0.3.0 ????????????????????????????? JAR ????? Main Class ?????????????? ????JDBC ???????????????????????????????? ?????????java -jar ojdbc6.jar ?? JDBC ?????????????????? $ java -jar ojdbc6.jar Oracle 11.2.0.3.0 JDBC 4.0 compiled with JDK6 on Thu_Jul_11_15:43:23_PDT_2013 #Default Connection Properties Resource #Fri May 30 10:37:32 JST 2014 ????? JAR ???????????? Main-Class ???????????? main(String[]) ??????????????????? Nashorn ?????????????? JAR ????? Main-Class ???? ?? Main-Class ???????????? jar ????? JAR ?????????META-INF/MANIFEST.MF ???????????????? Main-Class ??????? $ jar xf ojdbc6.jar $ grep Main-Class META-INF/MANIFEST.MF Main-Class: oracle.jdbc.OracleDriver Main-Class ? oracle.jdbc.OracleDriver ????????????? Main-Class ??? ??????? oracle.jdbc.OracleDriver ???? main ????? Nashorn ???????? $ jjs -cp ojdbc6.jar jjs> var OracleDriver = Java.type("oracle.jdbc.OracleDriver"); jjs> var StringArray = Java.type("java.lang.String[]"); jjs> OracleDriver.main(new StringArray(0)) Oracle 11.2.0.3.0 JDBC 4.0 compiled with JDK6 on Thu_Jul_11_15:43:23_PDT_2013 #Default Connection Properties Resource #Fri May 30 10:55:22 JST 2014 null jjs> java ????? JAR ??????????????????????????? Java ???????????????? Java.type() ??????? JavaClass ????????????????????? ??? Nashorn ????????????? JDBC ? Oracle DB ????????JAR ????? Main-Class ???????????????? ??? Oracle DB ????? SQL ???????????????

    Read the article

  • .NET WebRequest.PreAuthenticate not quite what it sounds like

    - by Rick Strahl
    I’ve run into the  problem a few times now: How to pre-authenticate .NET WebRequest calls doing an HTTP call to the server – essentially send authentication credentials on the very first request instead of waiting for a server challenge first? At first glance this sound like it should be easy: The .NET WebRequest object has a PreAuthenticate property which sounds like it should force authentication credentials to be sent on the first request. Looking at the MSDN example certainly looks like it does: http://msdn.microsoft.com/en-us/library/system.net.webrequest.preauthenticate.aspx Unfortunately the MSDN sample is wrong. As is the text of the Help topic which incorrectly leads you to believe that PreAuthenticate… wait for it - pre-authenticates. But it doesn’t allow you to set credentials that are sent on the first request. What this property actually does is quite different. It doesn’t send credentials on the first request but rather caches the credentials ONCE you have already authenticated once. Http Authentication is based on a challenge response mechanism typically where the client sends a request and the server responds with a 401 header requesting authentication. So the client sends a request like this: GET /wconnect/admin/wc.wc?_maintain~ShowStatus HTTP/1.1 Host: rasnote User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.3) Gecko/20090824 Firefox/3.5.3 (.NET CLR 4.0.20506) Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en,de;q=0.7,en-us;q=0.3 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 300 Connection: keep-alive and the server responds with: HTTP/1.1 401 Unauthorized Cache-Control: private Content-Type: text/html; charset=utf-8 Server: Microsoft-IIS/7.5 WWW-Authenticate: basic realm=rasnote" X-AspNet-Version: 2.0.50727 WWW-Authenticate: Negotiate WWW-Authenticate: NTLM WWW-Authenticate: Basic realm="rasnote" X-Powered-By: ASP.NET Date: Tue, 27 Oct 2009 00:58:20 GMT Content-Length: 5163 plus the actual error message body. The client then is responsible for re-sending the current request with the authentication token information provided (in this case Basic Auth): GET /wconnect/admin/wc.wc?_maintain~ShowStatus HTTP/1.1 Host: rasnote User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.3) Gecko/20090824 Firefox/3.5.3 (.NET CLR 4.0.20506) Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en,de;q=0.7,en-us;q=0.3 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 300 Connection: keep-alive Cookie: TimeTrakker=2HJ1998WH06696; WebLogCommentUser=Rick Strahl|http://www.west-wind.com/|[email protected]; WebStoreUser=b8bd0ed9 Authorization: Basic cgsf12aDpkc2ZhZG1zMA== Once the authorization info is sent the server responds with the actual page result. Now if you use WebRequest (or WebClient) the default behavior is to re-authenticate on every request that requires authorization. This means if you look in  Fiddler or some other HTTP client Proxy that captures requests you’ll see that each request re-authenticates: Here are two requests fired back to back: and you can see the 401 challenge, the 200 response for both requests. If you watch this same conversation between a browser and a server you’ll notice that the first 401 is also there but the subsequent 401 requests are not present. WebRequest.PreAuthenticate And this is precisely what the WebRequest.PreAuthenticate property does: It’s a caching mechanism that caches the connection credentials for a given domain in the active process and resends it on subsequent requests. It does not send credentials on the first request but it will cache credentials on subsequent requests after authentication has succeeded: string url = "http://rasnote/wconnect/admin/wc.wc?_maintain~ShowStatus"; HttpWebRequest req = HttpWebRequest.Create(url) as HttpWebRequest; req.PreAuthenticate = true; req.Credentials = new NetworkCredential("rick", "secret", "rasnote"); req.AuthenticationLevel = System.Net.Security.AuthenticationLevel.MutualAuthRequested; req.UserAgent = ": Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.3) Gecko/20090824 Firefox/3.5.3 (.NET CLR 4.0.20506)"; WebResponse resp = req.GetResponse(); resp.Close(); req = HttpWebRequest.Create(url) as HttpWebRequest; req.PreAuthenticate = true; req.Credentials = new NetworkCredential("rstrahl", "secret", "rasnote"); req.AuthenticationLevel = System.Net.Security.AuthenticationLevel.MutualAuthRequested; req.UserAgent = ": Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.3) Gecko/20090824 Firefox/3.5.3 (.NET CLR 4.0.20506)"; resp = req.GetResponse(); which results in the desired sequence: where only the first request doesn’t send credentials. This is quite useful as it saves quite a few round trips to the server – bascially it saves one auth request request for every authenticated request you make. In most scenarios I think you’d want to send these credentials this way but one downside to this is that there’s no way to log out the client. Since the client always sends the credentials once authenticated only an explicit operation ON THE SERVER can undo the credentials by forcing another login explicitly (ie. re-challenging with a forced 401 request). Forcing Basic Authentication Credentials on the first Request On a few occasions I’ve needed to send credentials on a first request – mainly to some oddball third party Web Services (why you’d want to use Basic Auth on a Web Service is beyond me – don’t ask but it’s not uncommon in my experience). This is true of certain services that are using Basic Authentication (especially some Apache based Web Services) and REQUIRE that the authentication is sent right from the first request. No challenge first. Ugly but there it is. Now the following works only with Basic Authentication because it’s pretty straight forward to create the Basic Authorization ‘token’ in code since it’s just an unencrypted encoding of the user name and password into base64. As you might guess this is totally unsecure and should only be used when using HTTPS/SSL connections (i’m not in this example so I can capture the Fiddler trace and my local machine doesn’t have a cert installed, but for production apps ALWAYS use SSL with basic auth). The idea is that you simply add the required Authorization header to the request on your own along with the authorization string that encodes the username and password: string url = "http://rasnote/wconnect/admin/wc.wc?_maintain~ShowStatus"; HttpWebRequest req = HttpWebRequest.Create(url) as HttpWebRequest; string user = "rick"; string pwd = "secret"; string domain = "www.west-wind.com"; string auth = "Basic " + Convert.ToBase64String(System.Text.Encoding.Default.GetBytes(user + ":" + pwd)); req.PreAuthenticate = true; req.AuthenticationLevel = System.Net.Security.AuthenticationLevel.MutualAuthRequested;req.Headers.Add("Authorization", auth); req.UserAgent = ": Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.3) Gecko/20090824 Firefox/3.5.3 (.NET CLR 4.0.20506)"; WebResponse resp = req.GetResponse(); resp.Close(); This works and causes the request to immediately send auth information to the server. However, this only works with Basic Auth because you can actually create the authentication credentials easily on the client because it’s essentially clear text. The same doesn’t work for Windows or Digest authentication since you can’t easily create the authentication token on the client and send it to the server. Another issue with this approach is that PreAuthenticate has no effect when you manually force the authentication. As far as Web Request is concerned it never sent the authentication information so it’s not actually caching the value any longer. If you run 3 requests in a row like this: string url = "http://rasnote/wconnect/admin/wc.wc?_maintain~ShowStatus"; HttpWebRequest req = HttpWebRequest.Create(url) as HttpWebRequest; string user = "ricks"; string pwd = "secret"; string domain = "www.west-wind.com"; string auth = "Basic " + Convert.ToBase64String(System.Text.Encoding.Default.GetBytes(user + ":" + pwd)); req.PreAuthenticate = true; req.Headers.Add("Authorization", auth); req.UserAgent = ": Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.3) Gecko/20090824 Firefox/3.5.3 (.NET CLR 4.0.20506)"; WebResponse resp = req.GetResponse(); resp.Close(); req = HttpWebRequest.Create(url) as HttpWebRequest; req.PreAuthenticate = true; req.Credentials = new NetworkCredential(user, pwd, domain); req.UserAgent = ": Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.3) Gecko/20090824 Firefox/3.5.3 (.NET CLR 4.0.20506)"; resp = req.GetResponse(); resp.Close(); req = HttpWebRequest.Create(url) as HttpWebRequest; req.PreAuthenticate = true; req.Credentials = new NetworkCredential(user, pwd, domain); req.UserAgent = ": Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.3) Gecko/20090824 Firefox/3.5.3 (.NET CLR 4.0.20506)"; resp = req.GetResponse(); you’ll find the trace looking like this: where the first request (the one we explicitly add the header to) authenticates, the second challenges, and any subsequent ones then use the PreAuthenticate credential caching. In effect you’ll end up with one extra 401 request in this scenario, which is still better than 401 challenges on each request. Getting Access to WebRequest in Classic .NET Web Service Clients If you’re running a classic .NET Web Service client (non-WCF) one issue with the above is how do you get access to the WebRequest to actually add the custom headers to do the custom Authentication described above? One easy way is to implement a partial class that allows you add headers with something like this: public partial class TaxService { protected NameValueCollection Headers = new NameValueCollection(); public void AddHttpHeader(string key, string value) { this.Headers.Add(key,value); } public void ClearHttpHeaders() { this.Headers.Clear(); } protected override WebRequest GetWebRequest(Uri uri) { HttpWebRequest request = (HttpWebRequest) base.GetWebRequest(uri); request.Headers.Add(this.Headers); return request; } } where TaxService is the name of the .NET generated proxy class. In code you can then call AddHttpHeader() anywhere to add additional headers which are sent as part of the GetWebRequest override. Nice and simple once you know where to hook it. For WCF there’s a bit more work involved by creating a message extension as described here: http://weblogs.asp.net/avnerk/archive/2006/04/26/Adding-custom-headers-to-every-WCF-call-_2D00_-a-solution.aspx. FWIW, I think that HTTP header manipulation should be readily available on any HTTP based Web Service client DIRECTLY without having to subclass or implement a special interface hook. But alas a little extra work is required in .NET to make this happen Not a Common Problem, but when it happens… This has been one of those issues that is really rare, but it’s bitten me on several occasions when dealing with oddball Web services – a couple of times in my own work interacting with various Web Services and a few times on customer projects that required interaction with credentials-first services. Since the servers determine the protocol, we don’t have a choice but to follow the protocol. Lovely following standards that implementers decide to ignore, isn’t it? :-}© Rick Strahl, West Wind Technologies, 2005-2010Posted in .NET  CSharp  Web Services  

    Read the article

  • Visual Studio 2010 SP1 Beta supports IIS Express

    - by DigiMortal
    Visual Studio 2010 SP1 Beta and ASP.NET MVC 3 RC2 were both announced today. I made a little test on one of my web applications to see how Visual Studio 2010 works with IIS Express. In this posting I will show you how to make your ASP.NET MVC 3 application work with IIS Express. Installing new stuff You can install IIS Express using Web Platform Installer. It is not part of WebMatrix anymore and you can just install IIS Express without WebMatrix. NB! You have to install IIS Express using Web Platform installer because IIS Express is not installed by SP1. After installing Visual Studio 2010 SP1 Beta on my machine (it took a long-long-long time to install) I installed also ASP.NET MVC 3 RC2. If you have Async CTP installed on your machine you have to uninstall it to get ASP.NET MVC 3 RC2 installed and run without problems. Screenshot on right shows what kinf of horrors my old laptop had to survive to get all new stuff installer. Setting IIS Express as server for web application Now, when you right-click on some web project you should see new menu item in context menu – Use IIS Express…. If you click on it you are asked for confirmation and if you say Yes then your web application is reconfigured to use IIS Express. After configuration you will see dialog box like this. And you are done. You can run your application now. Running web application When you run your application it is run on IIS Express. You can see IIS Express icon on taskbar and when you click it you can open IIS Express settings. If you closed your application in browser you can open it again from IIS Express icon. Modifying IIS Express settings for web application You can modify IIS Express settings for your application. Just open your project properties and move to Web tab. IIS and IIS Express are using same settings. The difference is if you make check to Use IIS Express checkbox or not. Switching back to Visual Studio Development Server If you don’t want or you can’t use IIS Express for some reason you can easily switch back to Visual Studio Development Server. Just right-click on your web application project and select Use Visual Studio Development Server from context menu. Conclusion IIS Express is more independent than full version of IIS and it can be also installed and run on machines where are very strict rules (some corporate and academic environments by example). IIS Express was previously part of WebMatrix package but now it is separate product and Visual Studio 2010 has very nice support for it thanks to SP1. You can easily make your web applications use IIS Express and if you want to switch back to development server it is also very easy.

    Read the article

  • How to configure LocalSessionFactoryBean to release connections after transaction end?

    - by peter
    I am testing an application (Spring 2.5, Hibernate 3.5.0 Beta, Atomikos 3.6.2, and Postgreql 8.4.2) with the configuration for the DAO listed below. The problem that I see is that the pool of 10 connections with the dataSource gets exhausted after the 10's transaction. I know 'hibernate.connection.release_mode' has no effect unless the session is obtained with openSession rather then using a contextual session. I am wandering if anyone has found a way to configure the LocalSessionFactoryBean to release connections after any transaction. Thank you Peter <bean id="dataSource" class="com.atomikos.jdbc.AtomikosDataSourceBean" init-method="init" destroy-method="close"> <property name="uniqueResourceName"><value>XADBMS</value></property> <property name="xaDataSourceClassName"> <value>org.postgresql.xa.PGXADataSource</value> </property> <property name="xaProperties"> <props> <prop key="databaseName">${jdbc.name}</prop> <prop key="serverName">${jdbc.server}</prop> <prop key="portNumber">${jdbc.port}</prop> <prop key="user">${jdbc.username}</prop> <prop key="password">${jdbc.password}</prop> </props> </property> <property name="poolSize"><value>10</value></property> </bean> <bean id="sessionFactory" class="org.springframework.orm.hibernate3.LocalSessionFactoryBean"> <property name="dataSource"> <ref bean="dataSource" /> </property> <property name="mappingResources"> <list> <value>Abc.hbm.xml</value> </list> </property> <property name="hibernateProperties"> <props> <prop key="hibernate.dialect">org.hibernate.dialect.PostgreSQLDialect</prop> <prop key="hibernate.show_sql">on</prop> <prop key="hibernate.format_sql">true</prop> <prop key="hibernate.connection.isolation">3</prop> <prop key="hibernate.current_session_context_class">jta</prop> <prop key="hibernate.transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</prop> <prop key="hibernate.transaction.manager_lookup_class">com.atomikos.icatch.jta.hibernate3.TransactionManagerLookup</prop> <prop key="hibernate.connection.release_mode">auto</prop> <prop key="hibernate.transaction.auto_close_session">true</prop> </props> </property> </bean> <!-- Transaction definition here --> <bean id="userTransactionService" class="com.atomikos.icatch.config.UserTransactionServiceImp" init-method="init" destroy-method="shutdownForce"> <constructor-arg> <props> <prop key="com.atomikos.icatch.service"> com.atomikos.icatch.standalone.UserTransactionServiceFactory </prop> </props> </constructor-arg> </bean> <!-- Construct Atomikos UserTransactionManager, needed to configure Spring --> <bean id="AtomikosTransactionManager" class="com.atomikos.icatch.jta.UserTransactionManager" init-method="init" destroy-method="close" depends-on="userTransactionService"> <property name="forceShutdown" value="false" /> </bean> <!-- Also use Atomikos UserTransactionImp, needed to configure Spring --> <bean id="AtomikosUserTransaction" class="com.atomikos.icatch.jta.UserTransactionImp" depends-on="userTransactionService"> <property name="transactionTimeout" value="300" /> </bean> <!-- Configure the Spring framework to use JTA transactions from Atomikos --> <bean id="txManager" class="org.springframework.transaction.jta.JtaTransactionManager" depends-on="userTransactionService"> <property name="transactionManager" ref="AtomikosTransactionManager" /> <property name="userTransaction" ref="AtomikosUserTransaction" /> </bean> <!-- the transactional advice (what 'happens'; see the <aop:advisor/> bean below) --> <tx:advice id="txAdvice" transaction-manager="txManager"> <tx:attributes> <!-- all methods starting with 'get' are read-only --> <tx:method name="get*" read-only="true" propagation="REQUIRED"/> <!-- other methods use the default transaction settings (see below) --> <tx:method name="*" propagation="REQUIRED"/> </tx:attributes> </tx:advice> <aop:config> <aop:advisor pointcut="execution(* *.*.AbcDao.*(..))" advice-ref="txAdvice"/> </aop:config> <!-- DAO objects --> <bean id="abcDao" class="test.dao.impl.HibernateAbcDao" scope="singleton"> <property name="sessionFactory" ref="sessionFactory"/> </bean>

    Read the article

  • How Expedia Made My New Bride Cry

    - by Lance Robinson
    Tweet this? Email Expedia and ask them to give me and my new wife our honeymoon? When Expedia followed up their failure with our honeymoon trip with a complete and total lack of acknowledgement of any responsibility for the problem and endless loops of explaining the issue over and over again - I swore that they would make it right. When they brought my new bride to tears, I got an immediate and endless supply of motivation. I hope you will help me make them make it right by posting our story on Twitter, Facebook, your blog, on Expedia itself, and when talking to your friends in person about their own travel plans.   If you are considering using them now for an important trip - reconsider. Short summary: We arrived early for a flight - but Expedia had made a mistake with the data they supplied to JetBlue and Emirates, which resulted in us not being able to check in (one leg of our trip was missing)!  At the time of this post, three people (myself, my wife, and an exceptionally patient JetBlue employee named Mary) each spent hours on the phone with Expedia.  I myself spent right at 3 hours (according to iPhone records), Lauren spent an hour and a half or so, and poor Mary was probably on the phone for a good 3.5 hours.  This is after 5 hours total at the airport.  If you add up our phone time, that is nearly 8 hours of phone time over a 5 hour period with little or no help, stall tactics (?), run-around, denial, shifting of blame, and holding. Details below (times are approximate): First, my wife and I were married yesterday - June 18th, the 3 year anniversary of our first date. She is awesome. She is the nicest person I have ever known, a ton of fun, absolutely beautiful in every way. Ok enough mushy - here are the dirty details. 2:30 AM - Early Check-in Attempt - we attempted to check-in for our flight online. Some sort of technology error on website, instructed to checkin at desk. 4:30 AM - Arrive at airport. Try to check-in at kiosk, get the same error. We got to the JetBlue desk at RDU International Airport, where Mary helped us. Mary discovered that the Expedia provided itinerary does not match the Expedia provided tickets. We are informed that when that happens American, JetBlue, and others that use the same software cannot check you in for the flight because. Why? Because the itinerary was missing a leg of our flight! Basically we were not shown in the system as definitely being able to make it home. Mary called Expedia and was put on hold by their automated system. 4:55 AM - Mary, myself, and my brand new bride all waited for about 25 minutes when finally I decided I would make a call myself on my iPhone while Mary was on the airport phone. In their automated system, I chose "make a new reservation", thinking they might answer a little more quickly than "customer service". Not surprisingly I was connected to an Expedia person within 1 minute. They informed me that they would have to forward me to a customer service specialist. I explained to them that we were already on hold for that and had been for nearly half an hour, that we were going on our honeymoon and that our flight would be leaving soon - could they please help us. "Yes, I will help you". I hand the phone to JetBlue Mary who explains the situation 3 or 4 times. Obviously I couldn't hear both ends of the conversation at this point, but the Expedia person explained what the problem was by stating exactly what Mary had just spent 15 minutes explaining. Mary calmly confirms that this is the problem, and asks Expedia to re-issue the itinerary. Expedia tells Mary that they'll have to transfer her to customer service. Mary asks for someone specific so that we get an answer this time, and goes on hold. Mary get's connected, explains the situation, and then Mary's connection gets terminated. 5:10 AM - Mary calls back to the Expedia automated system again, and we wait for about 5 minutes on hold this time before I pick up my iPhone and call Expedia again myself. Again I go to sales, a person picks up the phone in less than a minute. I explain the situation and let them know that we are now very close to missing our flight for our honeymoon, could they please help us. "Yes, I will help you". Again I give the phone to Mary who provides them with a call back number in case we get disconnected again and explains the situation again. More back and forth with Expedia doing nothing but repeating the same questions, Mary answering the questions with the same information she provided in the original explanation, and Expedia simply restating the problem. Mary again asks them to re-issue the itinerary, and explains that doing so will fix the problem. Expedia again repeats the problem instead of fixing it, and Mary's connection gets terminated. 5:20 AM - Mary again calls back to Expedia. My beautiful bride also calls on her own phone. At this point she is struggling to hold back her tears, stumbling through an explanation of all that has happened and that we are about to miss our flight. Please help us. "Yes, I will help". My beautiful bride's connection gets terminated. Ok, maybe this disconnection isn't an accident. We've now been disconnected 3 times on two different phones. 5:45 AM - I walk away and pleadingly beg a person to help me. They "escalate" the issue to "Rosy" (sp?) at Expedia. I go through the whole song and dance again with Rosy, who gives me the same treatment Mary was given. Rosy blames JetBlue for now having the correct data. Meanwhile Mary is on the phone with Emirates Air (the airline for the second leg of our trip), who agrees with JetBlue that Expedia's data isn't up to date. We are informed by two airport employees that issues like this with Expedia are not uncommon, and that the fix is simple. On the phone iwth Rosy, I ask her to re-issue the itinerary because we are about to miss our flight. She again explains the problem to me. At this point, I am standing at the window, pleading with Rosy to help us get to our honeymoon, watching our airplane. Then our airplane leaves without us. 6:03 AM - At this point we have missed our flight. Re-issuing the itinerary is no longer a solution. I ask Rosy to start from the beginning and work us up a new trip. She says that she cannot do that. She says that she needs to talk to JetBlue and Emirates and find out why we cannot check-in for our flight. I remind Rosy that our flight has already left - I just watched it taxi away - it no longer matters why (not to mention the fact that we already knew why, and have known why since 4:30 AM), and have known the solution since 4:30 AM. Rosy, can you please book a new trip? Yes, but it will cost $400. Excuse me? Now you can, but it will cost ME to fix your mistake? Rosy says that she can escalate the situation to her supervisor but that will take 1.5 hours. 6:15 AM - I told Rosy that if they had re-issued the itinerary as JetBlue asked (at 4:30 AM), my new wife and I might be on the airplane now instead of dealing with this on the phone and missing the beginning (and how much more?) of our honeymoon. Rosy said that it was not necessary to re-issue the itinerary. Out of curiosity, i asked Rosy if there was some financial burden on them to re-issue the itinerary. "No", said Rosy. I asked her if it was a large time burden on Expedia to re-issue the itinerary. "No", said Rosy. I directly asked Rosy: Why wouldn't Expedia have re-issued the itinerary when JetBlue asked? No answer. I asked Rosy: If you had re-issued the itinerary at 4:30, isn't it possible that I would be on that flight right now? She actually surprised me by answering "Yes" to that question. So I pointed out that it followed that Expedia was responsible for the fact that we missed out flight, and she immediately went into more about how the problem was with JetBlue - but now it was ALSO an Emirates Air problem as well. I tell Rosy to go ahead and escalate the issue again, and please call me back in that 1.5 hours (which how is about 1 hour and 10 minutes away). 6:30 AM - I start tweeting my frustration with iPhone. It's now pretty much impossible for us to make it to The Maldives by 3pm, which is the time at which we would need to arrive in order to be allowed service to the actual island where we are staying. Expedia has now given me the run-around for 2 hours, caused me to miss my flight, and worst of all caused my amazing new wife Lauren to miss our honeymoon. You think I was mad? No. Furious. Its ok to make mistakes - but to refuse to fix them and to ruin our honeymoon? No, not ok, Expedia. I swore right then that Expedia would make this right. 7:45 AM - JetBlue mary is still talking her tail off to other people in JetBlue and Emirates Air. Mary works it out so that if Expedia simply books a new trip, JetBlue and Emirates will both waive all the fees. Now we just have to convince Expedia to fix their mistake and get us on our way! Around this time Expedia Rosy calls me back! I inform her of the excellent work of JetBlue Mary - that JetBlue and Emirates both will waive the fees so Expedia can fix their mistake and get us going on our way. She says that she sees documentation of this in her system and that she needs to put me on hold "for 1 to 10 minutes" to talk to Emirates Air (why I'm not exactly sure). I say ok. 8:45 AM - After an hour on hold, Rosy comes on the line and asks me to hold more. I ask her to call me back. 9:35 AM - I put down the iPhone Twitter app and picks up the laptop. You think I made some noise with my iPhone? Heh 11:25 AM - Expedia follows me and sends a canned "We're sorry, DM us the details".  If you look at their Twitter feed, 16 out of the most recent 20 tweets are exactly the same canned response.  The other 4?  Ads.  Um - #MultiFAIL? To Expedia:  You now have had (as explained above) 8 hours of 3 different people explaining our situation, you know the email address of our Expedia account, you know my web blog, you know my Twitter address, you know my phone number.  You also know how upset you have made both me and my new bride by treating us with such a ... non caring, scripted, uncooperative, argumentative, and possibly even deceitful manner.  In the wise words of the great Kenan Thompson of SNL: "FIX IT!".  And no, I'm NOT going away until you make this right. Period. 11:45 AM - Expedia corporate office called.  The woman I spoke to was very nice and apologetic.  She listened to me tell the story again, she says she understands the problem and she is going to work to resolve it.  I don't have any details on what exactly that resolution might me, she said she will call me back in 20 minutes.  She found out about the problem via Twitter.  Thank you Twitter, and all of you who helped.  Hopefully social media will win my wife and I our honeymoon, and hopefully Expedia will encourage their customer service teams treat their customers properly. 12:22 PM - Spoke to Fran again from Expedia corporate office.  She has a flight for us tonight.  She is booking it now.  We will arrive at our honeymoon destination of beautiful Veligandu Island Resort only 1 day late.  She cannot confirm today, but she expects that Expedia will pay for the lost honeymoon night.  Thank you everyone for your help.  I will reflect more on this whole situation and confirm its resolution after our flight is 100% confirmed.  For now, I'm going to take a breather and go kiss my wonderful wife! 1:50 PM - Have not yet received the promised phone call.  We did receive an email with a new itinerary for a flight but the booking is not for specific seats, so there is no guarantee that my wife and I will be able to sit together.  With the original booking I carefully selected our seats for every segment of our trip.  I decided to call into the phone number that Fran from the Expedia corporate office gave me.  Its automated voice system identified itself as "Tier 3 Support".  I am currently still on hold with them, I have not gotten through to a human yet. 1:55 PM - Fran from Expedia called me back.  She confirmed us as booked.  She called the airlines to confirm.  Unfortunately, Expedia was unwilling or unable to allow us any type of seat selection.  It is possible that i won't get to sit next to the woman I married less than a day ago on our 40 total hours of flight time (there and back).  In addition, our seats could be the worst seats on the planes, with no reclining seat back or right next to the restroom.  Despite this fact (which in my opinion is huge), the horrible inconvenience, the hours at the airport, and the negative Internet publicity that Expedia is receiving, Expedia declined to offer us any kind of upgrade or to mark us as SFU (suitable for upgrade).  Since they didn't offer - I asked, and was rejected.  I am grateful to finally be heading in the right direction, but not only did Expedia horribly botch this job from the very beginning, they followed that botch job with near zero customer service, followed by a verbally apologetic but otherwise half-hearted resolution.  If this works out favorably for us, great.  If not - I'm not done making noise, Expedia.  You owe us, and I expect you to make it right.  You haven't quite done that yet. Thanks - Thank you to Twitter.  Thanks to all those who sympathize with us and helped us get the attention of Expedia, since three people (one of them an airline employee) using Expedia's normal channels of communication for many hours didn't help.  Thanks especially to my PowerShell and Sharepoint friends, my local friends, and those connectors who encouraged me and spread my story. 5:15 PM - Love Wins - After all this, Lauren and I are exhausted.  We both took a short nap, and when we woke up we talked about the last 24 hours.  It was a big, amazing, story-filled 24 hours.  I said that Expedia won, but Lauren said no.  She pointed out how lucky we are.  We are in love and married.  We have wonderful family and friends.  We are both hard-working successful people who love what they do.  We get to go to an amazing exotic destination for our honeymoon like Veligandu in The Maldives...  That's a lot of good.  Expedia didn't win.  This was (is) a big loss for Expedia.  It is a public blemish for all to see.  But Lauren and I did win, big time.  Expedia may not have made things right - but things are right for us.  Post in progress... I will relay any further comments (or lack of) from Expedia soon, as well as an update on confirmation of their repayment of our lost resort room rates.  I'll also post a picture of us on our honeymoon as soon as I can!

    Read the article

  • Getting started with Exchange Web Services 2010

    - by Adam Tuttle
    I've been tasked with writing a SOAP web-service in .Net to be middleware between EWS2010 and an application server that previously used WebDAV to connect to Exchange. (As I understand it, WebDAV is going away with EWS2010, so the application server will no longer be able to connect as it previously did, and it is exponentially harder to connect to EWS without WebDAV. The theory is that doing it in .Net should be easier than anything else... Right?!) My end goal is to be able to get and create/update email, calendar items, contacts, and to-do list items for a specified Exchange account. (Deleting is not currently necessary, but I may build it in for future consideration, if it's easy enough). I was originally given some sample code, which did in fact work, but I quickly realized that it was outdated. The types and classes used appear nowhere in the current documentation. For example, the method used to create a connection to the Exchange server was: ExchangeService svc = new ExchangeService(); svc.Credentials = new WebCredentials(AuthEmailAddress, AuthEmailPassword); svc.AutodiscoverUrl(AutoDiscoverEmailAddress); For what it's worth, this was using an assembly that came with the sample code: Microsoft.Exchange.WebServices.dll ("MEWS"). Before I realized that this wasn't the current standard way to accomplish the connection, and it worked, I tried to build on it and add a method to create calendar items, which I copied from here: static void CreateAppointment(ExchangeServiceBinding esb) { // Create the appointment. CalendarItemType appointment = new CalendarItemType(); ... } Right away, I'm confronted with the difference between ExchangeService and ExchangeServiceBinding ("ESB"); so I started Googling to try and figure out how to get an ESB definition so that the CreateAppointment method will compile. I found this blog post that explains how to generate a proxy class from a WSDL, which I did. Unfortunately, this caused some conflicts where types that were defined in the original Assembly, Microsoft.Exchange.WebServices.dll (that came with the sample code) overlapped with Types in my new EWS.dll assembly (which I compiled from the code generated from the services.wsdl provided by the Exchange server). I excluded the MEWS assembly, which only made things worse. I went from a handful of errors and warnings to 25 errors and 2,510 warnings. All kinds of types and methods were not found. Something is clearly wrong, here. So I went back on the hunt. I found instructions on adding service references and web references (i.e. the extra steps it takes in VS2008), and I think I'm back on the right track. I removed (actually, for now, just excluded) all previous assemblies I had been trying; and I added a service reference for https://my.exchange-server.com/ews/services.wsdl Now I'm down to just 1 error and 1 warning. Warning: The element 'transport' cannot contain child element 'extendedProtectionPolicy' because the parent element's content model is empty. This is in reference to a change that was made to web.config when I added the service reference; and I just found a fix for that here on SO. I've commented that section out as indicated, and it did make the warning go away, so woot for that. The error hasn't been so easy to get around, though: Error: The type or namespace name 'ExchangeService' could not be found (are you missing a using directive or an assembly reference?) This is in reference to the function I was using to create the EWS connection, called by each of the web methods: private ExchangeService getService(String AutoDiscoverEmailAddress, String AuthEmailAddress, String AuthEmailPassword) { ExchangeService svc = new ExchangeService(); svc.Credentials = new WebCredentials(AuthEmailAddress, AuthEmailPassword); svc.AutodiscoverUrl(AutoDiscoverEmailAddress); return svc; } This function worked perfectly with the MEWS assembly from the sample code, but the ExchangeService type is no longer available. (Nor is ExchangeServiceBinding, that was the first thing I checked.) At this point, since I'm not following any directions from the documentation (I couldn't find anywhere in the documentation that said to add a service reference to your Exchange server's services.wsdl -- but that does seem to be the best/farthest I've gotten so far), I feel like I'm flying blind. I know I need to figure out whatever it is that should replace ExchangeService / ExchangeServiceBinding, implement that, and then work through whatever errors crop up as a result of that switch... But I have no idea how to do that, or where to look for how to do it. Googling "ExchangeService" and "ExchangeServiceBinding" only seem to lead back to outdated blog posts and MSDN, neither of which has proven terribly helpful thus far. Help me, Obi-Wan, you're my only hope!

    Read the article

  • How to use SharePoint modal dialog box to display Custom Page Part3

    - by ybbest
    In the second part of the series, I showed you how to display and close a custom page in a SharePoint modal dialog using JavaScript and display a message after the modal dialog is closed. In this post, I’d like to show you how to use SPLongOperation with the Modal dialog box. You can download the source code here. 1. Firstly, modify the element file as follow <Elements xmlns="http://schemas.microsoft.com/sharepoint/"> <CustomAction Id="ReportConcern" RegistrationType="ContentType" RegistrationId="0x010100866B1423D33DDA4CA1A4639B54DD4642" Location="EditControlBlock" Sequence="107" Title="Display Custom Page" Description="To Display Custom Page in a modal dialog box on this item"> <UrlAction Url="javascript: function emitStatus(messageToDisplay) { statusId = SP.UI.Status.addStatus(messageToDisplay.message + ' ' +messageToDisplay.location ); SP.UI.Status.setStatusPriColor(statusId, 'Green'); } function portalModalDialogClosedCallback(result, value) { if (value !== null) { emitStatus(value); } } var options = { url: '{SiteUrl}' + '/_layouts/YBBEST/TitleRename.aspx?List={ListId}&amp;ID={ItemId}', title: 'Rename title', allowMaximize: false, showClose: true, width: 500, height: 300, dialogReturnValueCallback: portalModalDialogClosedCallback }; SP.UI.ModalDialog.showModalDialog(options);" /> </CustomAction> </Elements> 2. In your code behind, you can implement a close dialog function as below. This will close your modal dialog box once the button is clicked and display a status bar. Note that you need to use window.frameElement.commonModalDialogClose instead of window.frameElement.commonModalDialogClose protected void SubmitClicked(object sender, EventArgs e) { //Process stuff string message = "You clicked the Submit button"; string newLocation="http://www.google.com"; string information = string.Format("{{'message':'{0}','location':'{1}' }}", message, newLocation); var longOperation = new SPLongOperation(Page); longOperation.LeadingHTML = "Processing the  application"; longOperation.TrailingHTML = "Please wait while the application is being processed."; longOperation.Begin(); Thread.Sleep(5*1000); var closeDialogScript = GetCloseDialogScriptForLongProcess(information); longOperation.EndScript(closeDialogScript); } protected static string GetCloseDialogScriptForLongProcess(string message) { var scriptBuilder = new StringBuilder(); scriptBuilder.Append("window.frameElement.commonModalDialogClose(1,").Append(message).Append(");"); return scriptBuilder.ToString(); }   References: How to: Display a Page as a Modal Dialog Box

    Read the article

  • Emperors don’t come cheap

    - by RoyOsherove
    “Sorry” I replied in a polite email. “Maybe next year, when budgets allow for this”. It was addressed to the organizer of TechEd US, which was to be in New Orleans this year. Man, I would have loved to be in new Orleans this year, but, I guess these guys only understand one language – and I won’t be their puppy any more. You see, they wouldn’t pay for my business class flight to TechEd from Israel. Me– the great emperor of unit testing?! travelling coach for 12 hours? No thanks. I have better things to do! And this is after last year, they only invited me to have one talk throughout the conference. one talk. After the year before I was on the top ten speakers list of that conference?! No sir! They did give it a good try, though. They said they can pay up to 4,000$ per flight cost for me, and that they only found a flight at about 5460$. “Unacceptable” I told them when they asked if I would pay the difference. And that was that. Goodbye teched. As I closed up gmail, wondering if I should have told them that I found a similar flight at 4,300$, and came back to the living room, I told my wife, all full of myself “I just canceled teched”. “Oh good” she said. Not even looking at me as she tried to feed our one year old. “did you tell them you need to cancel because you already have another flight that month and your wife won’t let you travel more than once a month anymore?” “Yeah right” I said. Just what I need – for people to realize I’m totally whipped. I still need an ounce of dignity. “I told those bastards that if they want me they have to make an effort. People like me don’t come cheap, you know?” “You’re an idiot for not telling them the real reason.” She handed me the baby.  “What if they found a flight that matches their budget? How would you have gotten away from that engagement?” . She put on “Lost” on the media center and sat next to me. I did not reply.

    Read the article

  • Stackify Aims to Put More ‘Dev’ in ‘DevOps’

    - by Matt Watson
    Originally published on VisualStudioMagazine.com on 8/22/2012 by Keith Ward.The Kansas City-based startup wants to make it easier for developers to examine the network stack and find problems in code.The first part of “DevOps” is “Dev”. But according to Matt Watson, Devs aren’t connected enough with Ops, and it’s time that changed.He founded the startup company Stackify earlier this year to do something about it. Stackify gives developers unprecedented access to the IT side of the equation, Watson says, without putting additional burden on the system and network administrators who ultimately ensure the health of the environment.“We need a product designed for developers, with the goal of getting them more involved in operations and app support. Now, there’s next to nothing designed for developers,” Watson says. Stackify allows developers to search the network stack to troubleshoot problems in their software that might otherwise take days of coordination between development and IT teams to solve.Stackify allows developers to search log files, configuration files, databases and other infrastructure to locate errors. A key to this is that the developers are normally granted read-only access, soothing admin fears that developers will upload bad code to their servers.Implementation starts with data collection on the servers. Among the information gleaned is application discovery, server monitoring, file access, and other data collection, according to Stackify’s Web site. Watson confirmed that Stackify works seamlessly with virtualized environments as well.Although the data collection software must be installed on Windows servers, it can monitor both Windows and Linux servers. Once collection’s finished, developers have the kind of information they need, without causing heartburn for the IT staff.Stackify is a 100 percent cloud-based service. The company uses Windows Azure for hosting, a decision Watson’s happy with. With Azure, he says, “It’s nice to have all the dev tools like cache and table storage.” Although there have been a few glitches here and there with the service, it’s run very smoothly for the most part, he adds.Stackify is currently in a closed beta, with a public release scheduled for October. Watson says that pricing is expected to be $25 per month, per server, with volume discounts available. He adds that the target audience is companies with at least five developers.Watson founded Stackify after selling his last company, VinSolutions, to AutoTrader.com for “close to $150 million”, according to press accounts. Watson has since  founded the Watson Technology Group, which focuses on angel investing.About the Author: Keith Ward is the editor in chief of Visual Studio Magazine.

    Read the article

  • Backup Meta-Data

    - by BuckWoody
    I'm working on a PowerShell script to show me the trending durations of my backup activities. The first thing I need is the data, so I looked at the Standard Reports in SQL Server Management Studio, and found a report that suited my needs, so I pulled out the script that it runs and modified it to this T-SQL Script. A few words here - you need to be in the MSDB database for this to run, and you can add a WHERE clause to limit to a database, timeframe, type of backup, whatever. For that matter, I won't use all of the data in this query in my PowerShell script, but it gives me lots of avenues to graph: SELECT distinct t1.name AS 'DatabaseName' ,(datediff( ss,  t3.backup_start_date, t3.backup_finish_date)) AS 'DurationInSeconds' ,t3.user_name AS 'UserResponsible' ,t3.name AS backup_name ,t3.description ,t3.backup_start_date ,t3.backup_finish_date ,CASE WHEN t3.type = 'D' THEN 'Database' WHEN t3.type = 'L' THEN 'Log' WHEN t3.type = 'F' THEN 'FileOrFilegroup' WHEN t3.type = 'G' THEN 'DifferentialFile' WHEN t3.type = 'P' THEN 'Partial' WHEN t3.type = 'Q' THEN 'DifferentialPartial' END AS 'BackupType' ,t3.backup_size AS 'BackupSizeKB' ,t6.physical_device_name ,CASE WHEN t6.device_type = 2 THEN 'Disk' WHEN t6.device_type = 102 THEN 'Disk' WHEN t6.device_type = 5 THEN 'Tape' WHEN t6.device_type = 105 THEN 'Tape' END AS 'DeviceType' ,t3.recovery_model  FROM sys.databases t1 INNER JOIN backupset t3 ON (t3.database_name = t1.name )  LEFT OUTER JOIN backupmediaset t5 ON ( t3.media_set_id = t5.media_set_id ) LEFT OUTER JOIN backupmediafamily t6 ON ( t6.media_set_id = t5.media_set_id ) ORDER BY backup_start_date DESC I'll munge this into my Excel PowerShell chart script tomorrow. Script Disclaimer, for people who need to be told this sort of thing: Never trust any script, including those that you find here, until you understand exactly what it does and how it will act on your systems. Always check the script on a test system or Virtual Machine, not a production system. Yes, there are always multiple ways to do things, and this script may not work in every situation, for everything. It’s just a script, people. All scripts on this site are performed by a professional stunt driver on a closed course. Your mileage may vary. Void where prohibited. Offer good for a limited time only. Keep out of reach of small children. Do not operate heavy machinery while using this script. If you experience blurry vision, indigestion or diarrhea during the operation of this script, see a physician immediately. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • Backup Meta-Data

    - by BuckWoody
    I'm working on a PowerShell script to show me the trending durations of my backup activities. The first thing I need is the data, so I looked at the Standard Reports in SQL Server Management Studio, and found a report that suited my needs, so I pulled out the script that it runs and modified it to this T-SQL Script. A few words here - you need to be in the MSDB database for this to run, and you can add a WHERE clause to limit to a database, timeframe, type of backup, whatever. For that matter, I won't use all of the data in this query in my PowerShell script, but it gives me lots of avenues to graph: SELECT distinct t1.name AS 'DatabaseName' ,(datediff( ss,  t3.backup_start_date, t3.backup_finish_date)) AS 'DurationInSeconds' ,t3.user_name AS 'UserResponsible' ,t3.name AS backup_name ,t3.description ,t3.backup_start_date ,t3.backup_finish_date ,CASE WHEN t3.type = 'D' THEN 'Database' WHEN t3.type = 'L' THEN 'Log' WHEN t3.type = 'F' THEN 'FileOrFilegroup' WHEN t3.type = 'G' THEN 'DifferentialFile' WHEN t3.type = 'P' THEN 'Partial' WHEN t3.type = 'Q' THEN 'DifferentialPartial' END AS 'BackupType' ,t3.backup_size AS 'BackupSizeKB' ,t6.physical_device_name ,CASE WHEN t6.device_type = 2 THEN 'Disk' WHEN t6.device_type = 102 THEN 'Disk' WHEN t6.device_type = 5 THEN 'Tape' WHEN t6.device_type = 105 THEN 'Tape' END AS 'DeviceType' ,t3.recovery_model  FROM sys.databases t1 INNER JOIN backupset t3 ON (t3.database_name = t1.name )  LEFT OUTER JOIN backupmediaset t5 ON ( t3.media_set_id = t5.media_set_id ) LEFT OUTER JOIN backupmediafamily t6 ON ( t6.media_set_id = t5.media_set_id ) ORDER BY backup_start_date DESC I'll munge this into my Excel PowerShell chart script tomorrow. Script Disclaimer, for people who need to be told this sort of thing: Never trust any script, including those that you find here, until you understand exactly what it does and how it will act on your systems. Always check the script on a test system or Virtual Machine, not a production system. Yes, there are always multiple ways to do things, and this script may not work in every situation, for everything. It’s just a script, people. All scripts on this site are performed by a professional stunt driver on a closed course. Your mileage may vary. Void where prohibited. Offer good for a limited time only. Keep out of reach of small children. Do not operate heavy machinery while using this script. If you experience blurry vision, indigestion or diarrhea during the operation of this script, see a physician immediately. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • Asp.net session on browser close

    - by budugu
    Note: Cross posted from Vijay Kodali's Blog. Permalink How to capture logoff time when user closes browser? Or How to end user session when browser closed? These are some of the frequently asked questions in asp.net forums. In this post I'll show you how to do this when you're building an ASP.NET web application. Before we start, one fact: There is no full-proof technique to catch the browser close event for 100% of time. The trouble lies in the stateless nature of HTTP. The Web server is out of the picture as soon as it finishes sending the page content to the client. After that, all you can rely on is a client side script. Unfortunately, there is no reliable client side event for browser close. Solution: The first thing you need to do is create the web service. I've added web service and named it AsynchronousSave.asmx.    Make this web service accessible from Script, by setting class qualified with the ScriptServiceAttribute attribute...  Add a method (SaveLogOffTime) marked with [WebMethod] attribute. This method simply accepts UserId as a string variable and writes that value and logoff time to text file. But you can pass as many variables as required. You can then use this information for many purposes. To end user session, you can just call Session.Abandon() in the above web method. To enable web service to be called from page’s client side code, add script manager to page. Here i am adding to SessionTest.aspx page When the user closes the browser, onbeforeunload event fires on the client side. Our final step is adding a java script function to that event, which makes web service calls. The code is simple but effective My Code HTML:( SessionTest.aspx ) C#:( SessionTest.aspx.cs ) That’s’ it. Run the application and after browser close, open the text file to see the log off time. The above code works well in IE 7/8. If you have any questions, leave a comment.

    Read the article

  • Asp.net session on browser close

    - by budugu
    Note: Cross posted from Vijay Kodali's Blog. Permalink How to capture logoff time when user closes browser? Or How to end user session when browser closed? These are some of the frequently asked questions in asp.net forums. In this post I'll show you how to do this when you're building an ASP.NET web application. Before we start, one fact: There is no full-proof technique to catch the browser close event for 100% of time. The trouble lies in the stateless nature of HTTP. The Web server is out of the picture as soon as it finishes sending the page content to the client. After that, all you can rely on is a client side script. Unfortunately, there is no reliable client side event for browser close. Solution: The first thing you need to do is create the web service. I've added web service and named it AsynchronousSave.asmx.    Make this web service accessible from Script, by setting class qualified with the ScriptServiceAttribute attribute...  Add a method (SaveLogOffTime) marked with [WebMethod] attribute. This method simply accepts UserId as a string variable and writes that value and logoff time to text file. But you can pass as many variables as required. You can then use this information for many purposes. To end user session, you can just call Session.Abandon() in the above web method. To enable web service to be called from page’s client side code, add script manager to page. Here i am adding to SessionTest.aspx page When the user closes the browser, onbeforeunload event fires on the client side. Our final step is adding a java script function to that event, which makes web service calls. The code is simple but effective My Code HTML:( SessionTest.aspx ) C#:( SessionTest.aspx.cs ) That’s’ it. Run the application and after browser close, open the text file to see the log off time. The above code works well in IE 7/8. If you have any questions, leave a comment.

    Read the article

  • The softer side of BPM

    - by [email protected]
    BPM and RTD are great complementary technologies that together provide a much higher benefit than each of them separately. BPM covers the need for automating processes, making sure that there is uniformity, that rules and regulations are complied with and that the process runs smoothly and quickly processes the units flowing through it. By nature, this automation and unification can lead to a stricter, less flexible process. To avoid this problem it is common to encounter process definition that include multiple conditional branches and human input to help direct processing in the direction that best applies to the current situation. This is where RTD comes into play. The selection of branches and conditions and the optimization of decisions is better left in the hands of a system that can measure the results of its decisions in a closed loop fashion and make decisions based on the empirical knowledge accumulated through observing the running of the process.When designing a business process there are key places in which it may be beneficial to introduce RTD decisions. These are:Thresholds - whenever a threshold is used to determine the processing of a unit, there may be an opportunity to make the threshold "softer" by introducing an RTD decision based on predicted results. For example an insurance company process may have a total claim threshold to initiate an investigation. Instead of having that threshold, RTD could be used to help determine what claims to investigate based on the likelihood they are fraudulent, cost of investigation and effect on processing time.Human decisions - sometimes a process will let the human participants make decisions of flow. For example, a call center process may leave the escalation decision to the agent. While this has flexibility, it may produce undesired results and asymetry in customer treatment that is not based on objective functions but subjective reasoning by the agent. Instead, an RTD decision may be introduced to recommend escalation or other kinds of treatments.Content Selection - a process may include the use of messaging with customers. The selection of the most appropriate message to the customer given the content can be optimized with RTD.A/B Testing - a process may have optional paths for which it is not clear what populations they work better for. Rather than making the arbitrary selection or selection by committee of the option deeped the best, RTD can be introduced to dynamically determine the best path for each unit.In summary, RTD can be used to make BPM based process automation more dynamic and adaptable to the different situations encountered in processing. Effectively making the automation softer, less rigid in its processing.

    Read the article

  • PowerShell PowerPack Download

    - by BuckWoody
    I read Jeffery Hicks’ article in this month’s Redmond Magazine on a new add-in for Windows PowerShell 2.0. It’s called the PowerShell Pack and it has a some great new features that I plan to put into place on my production systems as soon as I finished learning and testing them. You can download the pack here if you have PowerShell 2.0. I’m having a lot of fun with it, and I’ll blog about what I’m learning here in the near future, but you should check it out. The only issue I have with it right now is that you have to load a module and then use get-help to find out what it does, because I haven’t found a lot of other documentation so far. The most interesting modules for me are the ones that can run a command elevated (in PSUserTools), the task scheduling commands (in TaskScheduler) and the file system checks and tools (in FileSystem). There’s also a way to create simple Graphical User Interface panels (in ). I plan to string all these together to install a management set of tools on my SQL Server Express Instances, giving the user “task buttons” to backup or restore a database, add or delete users and so on. Yes, I’ll be careful, and yes, I’ll make sure the user is allowed to do that. For now, I’m testing the download, but I thought I would share what I’m up to. If you have PowerShell 2.0 and you download the pack, let me know how you use it. Script Disclaimer, for people who need to be told this sort of thing: Never trust any script, including those that you find here, until you understand exactly what it does and how it will act on your systems. Always check the script on a test system or Virtual Machine, not a production system. Yes, there are always multiple ways to do things, and this script may not work in every situation, for everything. It’s just a script, people. All scripts on this site are performed by a professional stunt driver on a closed course. Your mileage may vary. Void where prohibited. Offer good for a limited time only. Keep out of reach of small children. Do not operate heavy machinery while using this script. If you experience blurry vision, indigestion or diarrhea during the operation of this script, see a physician immediately. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • Open the SQL Server Error Log with PowerShell

    - by BuckWoody
    Using the Server Management Objects (SMO) library, you don’t even need to have the SQL Server 2008 PowerShell Provider to read the SQL Server Error Logs – in fact, you can use regular old everyday PowerShell. Keep in mind you will need the SMO libraries – which can be installed separately or by installing the Client Tools from the SQL Server install media. You could search for errors, store a result as a variable, or act on the returned values in some other way. Replace the Machine Name with your server and Instance Name with your instance, but leave the quotes, to make this work on your system: [reflection.assembly]::LoadWithPartialName("Microsoft.SqlServer.Smo") $machineName = "UNIVAC" $instanceName = "Production" $sqlServer = new-object ("Microsoft.SqlServer.Management.Smo.Server") "$machineName\$instanceName" $sqlServer.ReadErrorLog() Want to search for something specific, like the word “Error”? Replace the last line with this: $sqlServer.ReadErrorLog() | where {$_.Text -like "Error*"} Script Disclaimer, for people who need to be told this sort of thing: Never trust any script, including those that you find here, until you understand exactly what it does and how it will act on your systems. Always check the script on a test system or Virtual Machine, not a production system. Yes, there are always multiple ways to do things, and this script may not work in every situation, for everything. It’s just a script, people. All scripts on this site are performed by a professional stunt driver on a closed course. Your mileage may vary. Void where prohibited. Offer good for a limited time only. Keep out of reach of small children. Do not operate heavy machinery while using this script. If you experience blurry vision, indigestion or diarrhea during the operation of this script, see a physician immediately. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • Oracle AutoVue Key Highlights from Oracle OpenWorld 2012

    - by Celine Beck
    We closed another successful Oracle Open World for AutoVue. Thanks to everyone who joined us this year. As usual, from customer presentations to evening networking activities, there was enough to keep us busy during the entire event. Here is a summary of some of the key highlights of the conference: Sessions:We had two AutoVue-specific sessions during Oracle Open World this year. The first session was part of the Product Lifecycle Management track and covered how AutoVue can be used to help drive effective decision making and streamline design for manufacturing processes. Attendees had the opportunity to learn from customer speaker GLOBALFOUNDRIES how they have been leveraging Oracle AutoVue within Agile PLM to enable high degree of collaboration during the exceptionally creative phases of their product development processes, securely, without risking valuable intellectual property. If you are interested, you can actually download the presentation by visiting launch.oracle.com/?plmopenworld2012.AutoVue was also featured as part of the Utilities track. This session focused on how visualization solutions play a critical role in effective plant optimization and configuration strategies defined by owners and operators of power generation facilities. Attendees learnt how integrated with document management systems, and enterprise applications like Oracle Primavera and Asset Lifecycle Management, AutoVue improves change management processes; minimizes risks by providing access to accurate engineering drawings which capture and reflect the as-maintained status of assets; and allows customers to drive complex maintenance projects to successful completion.Augmented Business Visualization for Agile PLMDuring Oracle Open World, we also showcased an Augmented Business Visualization-based solution for Oracle Agile PLM. An Augmented Business Visualization (ABV) solution is one where your structured data (from Oracle Agile PLM for instance) and your unstructured data (documents, designs, 3D models, etc) come together to allow you to make better decisions (check out our blog posts on the topic: Augment the Value of Your Data (or Time to replace the “attach” button) and Context is Everything ). As part of the Agile PLM, the idea is to support more effective decision-making by turning 3D assemblies into color-coded reports, and streamlining business processes like Engineering Change Management by enabling the automatic creation of engineering change requests in Agile PLM directly from documents being viewed in AutoVue. More on this coming soon...probably during the Oracle Value Chain Summit to be held in San Francisco, from Feb. 4-6, 2013 in San Francisco! Mark your calendars and stay tuned for more information! And thanks again for joining us at Oracle OpenWorld!

    Read the article

  • Appropriate response when client empowered with CMS destroys content to his own will

    - by dukeofgaming
    So, I just recently closed a website project that pretty much was The Oatmeals' Design Hell, but with content. The client loved the site at the beginning but started getting other people involved and mercilessly bombarding us with their opinions. We served a carefully thought content strategy (which the client approved) and extremely curated copywriting that took us four months after at least 5 requirement changes (new content, new objectives for the business, changed offerings, new mindfaps, etc.) that required us to rewrite the content about 3 times. The client never gave timely feedback even though we kept the process open for him and his people to see (content being developed transparently in Google Docs). Near the end of the project he still wanted to make changes but wanted us to finish already (there are not enough words in the world to even try to make sense of this). So I explained to him the obvious implications of the never-ending requirement changes and advised him to take the time to gather his thoughts with his own team and see the new content introduced as a new content maintenance project. He happily accepted, but on the day of training/delivery things went very wrong and we have no idea why. The client didn't even allow the site to be out for a week with the content we developed for him and quickly replaced us with a Joomla savvy intern so that he completely destroy the content with shallow, unstructured, tasteless and plain wordsmithing (and I'm not even being visceral). Worst insult of all, he revoked our access from his server and the deployed CMS not even having passed 10 minutes of being given his administrator account (we realized the day after that he did it in our own office, the nerve!). Everybody involved in the team is enraged and insulted. I never want to see this happen again. So, to try to make sense of this situation and avoid it in the future with new clients I have two concrete questions: Is there even an appropriate course of action with a client like this?, or is he just not worth the trouble of analyzing (blindly hoping this never repeats again). In the exercise to try and blame ourselves instead of the client and take this as a lesson of... something, how should we set expectations for new clients about the working terms, process and final product so that they are discouraged from mauling the content to their own contempt once they get the codes to the nukes (access to the CMS)?

    Read the article

  • A* navigational mesh path finding

    - by theguywholikeslinux
    So I've been making this top down 2D java game in this framework called Greenfoot [1] and I've been working on the AI for the guys you are gonna fight. I want them to be able to move around the world realistically so I soon realized, amongst a couple of other things, I would need some kind of pathfinding. I have made two A* prototypes. One is grid based and then I made one that works with waypoints so now I need to work out a way to get from a 2d "map" of the obstacles/buildings to a graph of nodes that I can make a path from. The actual pathfinding seems fine, just my open and closed lists could use a more efficient data structure, but I'll get to that if and when I need to. I intend to use a navigational mesh for all the reasons out lined in this post on ai-blog.net [2]. However, the problem I have faced is that what A* thinks is the shortest path from the polygon centres/edges is not necessarily the shortest path if you travel through any part of the node. To get a better idea you can see the question I asked on stackoverflow [3]. I got a good answer concerning a visibility graph. I have since purchased the book (Computational Geometry: Algorithms and Applications [4]) and read further into the topic, however I am still in favour of a navigational mesh (See "Managing Complexity" [5] from Amit’s Notes about Path-Finding [6]). (As a side note, maybe I could possibly use Theta* to convert multiple waypoints into one straight line if the first and last are not obscured. Or each time I move back check to the waypoint before last to see if I can go straight from that to this) So basically what I want is a navigational mesh where once I have put it through a funnel algorithm (e.g. this one from Digesting Duck [7]) I will get the true shortest path, rather than get one that is the shortest path following node to node only, but not the actual shortest given that you can go through some polygons and skip nodes/edges. Oh and I also want to know how you suggest storing the information concerning the polygons. For the waypoint prototype example I made I just had each node as an object and stored a list of all the other nodes you could travel to from that node, I'm guessing that won't work with polygons? and how to I tell if a polygon is open/traversable or if it is a solid object? How do I store which nodes make up the polygon? Finally, for the record: I do want to programme this by myself from scratch even though there are already other solutions available and I don't intend to be (re) using this code in anything other than this game so it does not matter that it will inevitably be poor quality. http://greenfoot.org http://www.ai-blog.net/archives/000152.html http://stackoverflow.com/q/7585515/ http://www.cs.uu.nl/geobook/ http://theory.stanford.edu/~amitp/GameProgramming/MapRepresentations.html http://theory.stanford.edu/~amitp/GameProgramming/ http://digestingduck.blogspot.com/2010/03/simple-stupid-funnel-algorithm.html

    Read the article

< Previous Page | 535 536 537 538 539 540 541 542 543 544 545 546  | Next Page >