Search Results

Search found 38337 results on 1534 pages for 'ubuntu 11 04'.

Page 54/1534 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >

  • slow pppoe connection using Ubuntu 9.10

    - by Radu
    I have a Compaq Presario CQ61, instaled Ubuntu 9.10 and Windows 7 on it. It works great except the PPPoE connection in Ubuntu, when i dial in Windows my download speed reach up to 91 Mb, rebooted in Ubuntu, downloaded same file from the same server with a speed of maximum 3 Mb, cheked in Windows again 80 - 90 Mb constant. I can't figure what slow's the internet connection in Ubuntu. Anyone has an ideea on this problem ? (NO iptables configured, NO HTB, CBQ ...etc configured) . Thank you

    Read the article

  • Why can't I connect to a Cisco wireless access point?

    - by spinlock
    I'm running a Lucid Netbook Remix on my Dell Inspiron 600m and I was not able to connect to the wireless network at the Hacker Dojo in Mountain View yesterday. There were plenty of other people on the network - MS, Mac, and Linux boxes - but my laptop would never get an ip address. I can connect to my home network, which is open, and I've never had a problem connecting at the coffee shop, which uses WPA. The Hacker Dojo is running WPA and we checked the password a number of times but got no love. Any ideas would be greatly appreciated. Additional Info: $iwlist eth1 scan eth1 Scan completed : Cell 01 - Address: EC:C8:82:FA:63:92 ESSID:"HackerDojo-gwifi" Protocol:IEEE 802.11g Mode:Master Frequency:2.412 GHz (Channel 1) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:62 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 280ms ago Cell 02 - Address: 00:18:4D:24:08:61 ESSID:"Green Zone" Protocol:IEEE 802.11bg Mode:Master Frequency:2.417 GHz (Channel 2) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:23 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 11516ms ago Cell 03 - Address: 08:17:35:32:6E:13 ESSID:"\x00" Protocol:IEEE 802.11g Mode:Master Frequency:2.437 GHz (Channel 6) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:71 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 2760ms ago Cell 04 - Address: EC:C8:82:FA:63:90 ESSID:"HackerDojo" Protocol:IEEE 802.11g Mode:Master Frequency:2.412 GHz (Channel 1) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:61 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 772ms ago Cell 05 - Address: 08:17:35:32:6E:11 ESSID:"HackerDojo-Presenter" Protocol:IEEE 802.11g Mode:Master Frequency:2.437 GHz (Channel 6) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:65 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 3308ms ago Cell 06 - Address: 08:17:35:32:7E:31 ESSID:"HackerDojo-Presenter" Protocol:IEEE 802.11g Mode:Master Frequency:2.462 GHz (Channel 11) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:88 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 1668ms ago Cell 07 - Address: 38:E7:D8:01:46:1E ESSID:"JWS_Incredible" Protocol:IEEE 802.11bg Mode:Master Frequency:2.412 GHz (Channel 1) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 500 kb/s; 54 Mb/s Quality:31 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK Extra: Last beacon: 2848ms ago Cell 08 - Address: 08:17:35:32:6E:10 ESSID:"HackerDojo" Protocol:IEEE 802.11g Mode:Master Frequency:2.437 GHz (Channel 6) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:67 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 7848ms ago Cell 09 - Address: 08:17:35:32:7E:30 ESSID:"HackerDojo" Protocol:IEEE 802.11g Mode:Master Frequency:2.462 GHz (Channel 11) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:85 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 8300ms ago Cell 10 - Address: 08:17:35:32:6E:12 ESSID:"HackerDojo-gwifi" Protocol:IEEE 802.11g Mode:Master Frequency:2.437 GHz (Channel 6) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:68 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 232ms ago Cell 11 - Address: 08:17:35:32:7E:32 ESSID:"HackerDojo-gwifi" Protocol:IEEE 802.11g Mode:Master Frequency:2.462 GHz (Channel 11) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:86 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 168ms ago Cell 12 - Address: EC:C8:82:FA:63:91 ESSID:"HackerDojo-Presenter" Protocol:IEEE 802.11g Mode:Master Frequency:2.412 GHz (Channel 1) Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Quality:62 Signal level:0 Noise level:0 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Extra: Last beacon: 7408ms ago $iwconfig eth1 eth1 unassociated ESSID:"HackerDojo-gwifi" Nickname:"ipw2100" Mode:Managed Channel=0 Access Point: Not-Associated Bit Rate:0 kb/s Tx-Power:16 dBm Retry short limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0

    Read the article

  • Credential Error when launching Ubuntu One

    - by user85997
    I encountered the following error when I launch "Ubuntu One" client: CredentialsError DBusException(dbus.String(u'Process /usr/lib/ubuntu-sso-client/ubuntu-sso-login exited with status 1'),) I read some FAQ about how to reinstall the "Ubuntu One" client. But one of the step about "Password and Encryption", I face this issue. I can't seem to find Applications-Accessories-Passwords and Encryption Keys on my Ubuntu 12.04 PC. Anyone can help, pls?

    Read the article

  • Recovering Ubuntu 9.10 /Windows 7 dual boot with Wubi

    - by user56110
    I had installed Ubuntu 9.10 /Windows 7 dual boot with Wubi. I had no issues for about 9 months, and then after having to do a force reboot after ubuntu got hunng, and never goes past boot-up. On boot up, and selecting ubuntu, I get this error message: One or more of the mounts listed in /etc/fstab cannot yet be mounted: /: waiting for /dev/loop0 /tmp: waiting for (null) Press ESC to enter a recovery shell When I enter the recovery shell, I get this error message: General error mounting filesystem A maintainance shell will be started The maintenace shell does start- and I am able to access files. However, X-server does not work, so gedit, and similar applications does not work. I have done chkdsk on Windows, and this didnt solve nmy problem. From what I have been reading online,I have seen quite a few posts advising against wubi ubuntu installation, and generally to the effect that 'do a clean install' I found that the person on this thread has faced an identical issue, but he had to do a re-install http://ubuntuforums.org/archive/index.php/t-1051277.html Can I make my ubuntu box work right, as it was before? :-)

    Read the article

  • Is Ubuntu Netbook Remix actually lighter than Ubuntu Desktop?

    - by D Connors
    I'm running ubuntu on my work notebook. While it's not a netbook, it is a relatively weak machine. So, even though I'm not a big fan of the ubuntu netbook interface, I would be willing to use it if it's lighter (on RAM and CPU) than the desktop version. I know there are some very light linux distros available out there, but I'd like to stick with ubuntu both for it's community and for the support I have available here at my workplace. So, is Ubuntu Netbook Remix lighter on system resources than Ubuntu Desktop?

    Read the article

  • Install GIMP 2.7.1 on Lucid Lynx using PPA

    - by Vivek
    GIMP lovers are going to be disappointed to hear that GIMP is going away in the next release of much awaited Ubuntu 10.04. Today we take a look at installing in on Lucid Lynx using PPA. The reason for getting rid of it as cited by the GIMP developers, is that GIMP is too professional a software to be included in regular desktop version of Ubuntu. And it takes up too much of space on the disk. Also, the fact that it’s too complicated for regular users. If you can’t live without it…let’s see how to install GIMP 2.7.1 on Lucid Lynx (Currently in Alpha). The new version of GIMP supports single window mode and we will also see how to enable this feature as well. First we need to add the official GIMP 2.7.1 PPA in the software sources of Ubuntu 10.04, by opening the terminal window and typing the following command: sudo sh -c “echo ‘deb http://ppa.launchpad.net/matthaeus123/mrw-gimp-svn/ubuntu lucid main’ >> /etc/apt/sources.list” Now that we have added the PPA we need to add the GPG key, so type the following in your Terminal window. sudo apt-key adv –recv-keys –keyserver keyserver.ubuntu.com 405A15CB Next up we have to update the software repository… sudo apt-get update All that is left is to install GIMP 2.7.1 by typing in the following… sudo apt-get install gimp Click ‘Y’ (for yes) to install GIMP Once GIMP is installed you can start it by going to Applications > Graphics > GNU Image Manipulation Program. You now have your favorite GIMP on your favorite Ubuntu 10.04. As you can see in the image below, GIMP still comes with default 3 windows, which could clog up your lower panel In Ubuntu 10.04. However, now you can run GIMP in single window mode by going to Windows > Single-Window mode. That’s all! Now you have your GIMP running in single window mode with less of hassle to manage 3 windows. It’s unfortunate that GIMP will not be included, but by following these instructions, you’ll be able to enjoy using it in Ubuntu 10.04. Similar Articles Productive Geek Tips Show the List of Installed Packages on Ubuntu or DebianHow to Install Windows Applications on Linux Using CrossoverInstall VMware Tools on Ubuntu Edgy EftInstall Adobe PDF Reader on Ubuntu EdgyInstall MySQL Server 4.1 on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more Download Microsoft Office Help tab The Growth of Citibank Quickly Switch between Tabs in IE Windows Media Player 12: Tweak Video & Sound with Playback Enhancements

    Read the article

  • "device-mapper resume ioctl failed" when run a instance

    - by user1490377
    I install ubuntu-12.04 server and openstack on two computer. When Launch an image, the instance can't run and show error state! nova-compute.log details: 2012-06-24 12:02:00 DEBUG nova.utils [req-71fdca27-5f93-438e-a4be-ddc54f698171 c737b66b2102415f817ca50b9649fd8f 5b1da4eaee3643919a230efc06473720] Unexpected error while running command. Command: sudo nova-rootwrap kpartx -a /dev/nbd15 Exit code: 1 Stdout: '' Stderr: 'device-mapper: resume ioctl failed: Invalid argument\ncreate/reload failed on nbd15p1\n' from (pid=1267) trycmd /usr/lib/python2.7/dist-packages/nova/utils.py:277 2012-06-24 12:02:00 DEBUG nova.utils [req-71fdca27-5f93-438e-a4be-ddc54f698171 c737b66b2102415f817ca50b9649fd8f 5b1da4eaee3643919a230efc06473720] Running cmd (subprocess): sudo nova-rootwrap qemu-nbd -d /dev/nbd15 from (pid=1267) execute /usr/lib/python2.7/dist-packages/nova/utils.py:219 2012-06-24 12:02:02 DEBUG nova.virt.disk.api [req-71fdca27-5f93-438e-a4be-ddc54f698171 c737b66b2102415f817ca50b9649fd8f 5b1da4eaee3643919a230efc06473720] Failed to map partitions: Unexpected error while running command. Command: sudo nova-rootwrap kpartx -a /dev/nbd15 Exit code: 1 Stdout: '' Stderr: 'device-mapper: resume ioctl failed: Invalid argument\ncreate/reload failed on nbd15p1\n' from (pid=1267) mount /usr/lib/python2.7/dist-packages/nova/virt/disk/api.py:205

    Read the article

  • Wireless will not connect

    - by azz0r
    Hello, I have installed Ubuntu 10.10 on the same machine as my windows setup. However, it will not connect to my wireless network. It can see its there, it can attempt to connect, yet it will never connect. It will keep bringing up the password prompt everyso often. I have tried turning my security to WEP, I ended up turning it back to WPA2. It is set to AES (noted a few threads on google about that). Can you assist? I would love to dive into Ubuntu, but without the internet its pointless. --- lshw -C network --- *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 02 serial: 00:1d:92:ea:cc:62 capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8168 driverversion=8.020.00-NAPI duplex=half latency=0 link=no multicast=yes port=twisted pair resources: irq:29 ioport:e800(size=256) memory:feaff000-feafffff memory:f8ff0000-f8ffffff(prefetchable) memory:feac0000-feadffff(prefetchable) *-network description: Wireless interface physical id: 1 logical name: wlan0 serial: 00:15:af:72:a4:38 capabilities: ethernet physical wireless configuration: broadcast=yes multicast=yes wireless=IEEE 802.11bgn --- iwconfig ---- lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"Wuggawoo" Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated Tx-Power=9 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on --- cat /etc/network/interfaces ---- auto lo iface lo inet loopback logs deamon.log --- Jan 19 04:17:09 ubuntu wpa_supplicant[1289]: Authentication with 94:44:52:0d:22:0d timed out. Jan 19 04:17:09 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: associating -> disconnected Jan 19 04:17:09 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: disconnected -> scanning Jan 19 04:17:11 ubuntu wpa_supplicant[1289]: WPS-AP-AVAILABLE Jan 19 04:17:11 ubuntu wpa_supplicant[1289]: Trying to associate with 94:44:52:0d:22:0d (SSID='Wuggawoo' freq=2437 MHz) Jan 19 04:17:11 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: scanning -> associating Jan 19 04:17:12 ubuntu NetworkManager: <info> Activation (wlan0/wireless): association took too long. Jan 19 04:17:12 ubuntu NetworkManager: <info> (wlan0): device state change: 5 -> 6 (reason 0) Jan 19 04:17:12 ubuntu NetworkManager: <info> Activation (wlan0/wireless): asking for new secrets Jan 19 04:17:12 ubuntu NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled... Jan 19 04:17:12 ubuntu NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started... Jan 19 04:17:12 ubuntu NetworkManager: <info> (wlan0): device state change: 6 -> 4 (reason 0) Jan 19 04:17:12 ubuntu NetworkManager: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled... Jan 19 04:17:12 ubuntu NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete. Jan 19 04:17:12 ubuntu NetworkManager: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting... Jan 19 04:17:12 ubuntu NetworkManager: <info> (wlan0): device state change: 4 -> 5 (reason 0) Jan 19 04:17:12 ubuntu NetworkManager: <info> Activation (wlan0/wireless): connection 'Wuggawoo' has security, and secrets exist. No new secrets needed. Jan 19 04:17:12 ubuntu NetworkManager: <info> Config: added 'ssid' value 'Wuggawoo' Jan 19 04:17:12 ubuntu NetworkManager: <info> Config: added 'scan_ssid' value '1' Jan 19 04:17:12 ubuntu NetworkManager: <info> Config: added 'key_mgmt' value 'WPA-PSK' Jan 19 04:17:12 ubuntu NetworkManager: <info> Config: added 'psk' value '<omitted>' Jan 19 04:17:12 ubuntu NetworkManager: nm_setting_802_1x_get_pkcs11_engine_path: assertion `NM_IS_SETTING_802_1X (setting)' failed Jan 19 04:17:12 ubuntu NetworkManager: nm_setting_802_1x_get_pkcs11_module_path: assertion `NM_IS_SETTING_802_1X (setting)' failed Jan 19 04:17:12 ubuntu NetworkManager: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete. Jan 19 04:17:12 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: associating -> disconnected Jan 19 04:17:12 ubuntu NetworkManager: <info> Config: set interface ap_scan to 1 Jan 19 04:17:12 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: disconnected -> scanning Jan 19 04:17:13 ubuntu wpa_supplicant[1289]: WPS-AP-AVAILABLE Jan 19 04:17:13 ubuntu wpa_supplicant[1289]: Trying to associate with 94:44:52:0d:22:0d (SSID='Wuggawoo' freq=2437 MHz) Jan 19 04:17:13 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: scanning -> associating Jan 19 04:17:23 ubuntu wpa_supplicant[1289]: Authentication with 94:44:52:0d:22:0d timed out. Jan 19 04:17:23 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: associating -> disconnected Jan 19 04:17:23 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: disconnected -> scanning Jan 19 04:17:24 ubuntu AptDaemon: INFO: Initializing daemon Jan 19 04:17:25 ubuntu wpa_supplicant[1289]: WPS-AP-AVAILABLE Jan 19 04:17:25 ubuntu wpa_supplicant[1289]: Trying to associate with 94:44:52:0d:22:0d (SSID='Wuggawoo' freq=2437 MHz) Jan 19 04:17:25 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: scanning -> associating Jan 19 04:17:27 ubuntu NetworkManager: <info> wlan0: link timed out. --- kern.log --- Jan 19 04:18:11 ubuntu kernel: [ 142.420024] wlan0: direct probe to AP 94:44:52:0d:22:0d timed out Jan 19 04:18:13 ubuntu kernel: [ 144.333847] wlan0: direct probe to AP 94:44:52:0d:22:0d (try 1) Jan 19 04:18:13 ubuntu kernel: [ 144.539996] wlan0: direct probe to AP 94:44:52:0d:22:0d (try 2) Jan 19 04:18:13 ubuntu kernel: [ 144.750027] wlan0: direct probe to AP 94:44:52:0d:22:0d (try 3) Jan 19 04:18:14 ubuntu kernel: [ 144.940022] wlan0: direct probe to AP 94:44:52:0d:22:0d timed out Jan 19 04:18:25 ubuntu kernel: [ 155.832995] wlan0: direct probe to AP 94:44:52:0d:22:0d (try 1) Jan 19 04:18:25 ubuntu kernel: [ 156.030046] wlan0: direct probe to AP 94:44:52:0d:22:0d (try 2) Jan 19 04:18:25 ubuntu kernel: [ 156.230039] wlan0: direct probe to AP 94:44:52:0d:22:0d (try 3) Jan 19 04:18:25 ubuntu kernel: [ 156.430039] wlan0: direct probe to AP 94:44:52:0d:22:0d timed out --- syslog --- Jan 19 04:18:46 ubuntu wpa_supplicant[1289]: Authentication with 94:44:52:0d:22:0d timed out. Jan 19 04:18:46 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: associating -> disconnected Jan 19 04:18:46 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: disconnected -> scanning Jan 19 04:18:48 ubuntu wpa_supplicant[1289]: WPS-AP-AVAILABLE Jan 19 04:18:48 ubuntu wpa_supplicant[1289]: Trying to associate with 94:44:52:0d:22:0d (SSID='Wuggawoo' freq=2437 MHz) Jan 19 04:18:48 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: scanning -> associating Jan 19 04:18:48 ubuntu kernel: [ 178.833905] wlan0: direct probe to AP 94:44:52:0d:22:0d (try 1) Jan 19 04:18:48 ubuntu kernel: [ 179.030035] wlan0: direct probe to AP 94:44:52:0d:22:0d (try 2) Jan 19 04:18:48 ubuntu kernel: [ 179.230020] wlan0: direct probe to AP 94:44:52:0d:22:0d (try 3) Jan 19 04:18:48 ubuntu kernel: [ 179.433634] wlan0: direct probe to AP 94:44:52:0d:22:0d timed out lspci and lsusb lspci -- 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:02.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0) 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] 00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller 00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller 00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3a) 00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge 00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 01:00.0 VGA compatible controller: nVidia Corporation G80 [GeForce 8800 GTS] (rev a2) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) 03:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller -- lsusb -- Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 003: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser Bus 004 Device 002: ID 045e:0730 Microsoft Corp. Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 003: ID 13d3:3247 IMC Networks 802.11 n/g/b Wireless LAN Adapter Bus 002 Device 002: ID 0718:0628 Imation Corp. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 046d:08c2 Logitech, Inc. QuickCam PTZ Bus 001 Device 002: ID 0424:2228 Standard Microsystems Corp. 9-in-2 Card Reader Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub With no security on my router I still can't connect, I get: Jan 19 15:58:01 ubuntu wpa_supplicant[1165]: Authentication with 94:44:52:0d:22:0d timed out. Jan 19 15:58:01 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: associating -> disconnected Jan 19 15:58:01 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: disconnected -> scanning Jan 19 15:58:02 ubuntu wpa_supplicant[1165]: WPS-AP-AVAILABLE Jan 19 15:58:02 ubuntu wpa_supplicant[1165]: Trying to associate with 94:44:52:0d:22:0d (SSID='Wuggawoo' freq=2437 MHz) Jan 19 15:58:02 ubuntu wpa_supplicant[1165]: Association request to the driver failed Jan 19 15:58:02 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: scanning -> associating Jan 19 15:58:05 ubuntu NetworkManager: <info> wlan0: link timed out. Jan 19 15:58:07 ubuntu wpa_supplicant[1165]: Authentication with 94:44:52:0d:22:0d timed out. Jan 19 15:58:07 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: associating -> disconnected Jan 19 15:58:07 ubuntu NetworkManager: <info> (wlan0): supplicant connec

    Read the article

  • Move Files from a Failing PC with an Ubuntu Live CD

    - by Trevor Bekolay
    You’ve loaded the Ubuntu Live CD to salvage files from a failing system, but where do you store the recovered files? We’ll show you how to store them on external drives, drives on the same PC, a Windows home network, and other locations. We’ve shown you how to recover data like a forensics expert, but you can’t store recovered files back on your failed hard drive! There are lots of ways to transfer the files you access from an Ubuntu Live CD to a place that a stable Windows machine can access them. We’ll go through several methods, starting each section from the Ubuntu desktop – if you don’t yet have an Ubuntu Live CD, follow our guide to creating a bootable USB flash drive, and then our instructions for booting into Ubuntu. If your BIOS doesn’t let you boot using a USB flash drive, don’t worry, we’ve got you covered! Use a Healthy Hard Drive If your computer has more than one hard drive, or your hard drive is healthy and you’re in Ubuntu for non-recovery reasons, then accessing your hard drive is easy as pie, even if the hard drive is formatted for Windows. To access a hard drive, it must first be mounted. To mount a healthy hard drive, you just have to select it from the Places menu at the top-left of the screen. You will have to identify your hard drive by its size. Clicking on the appropriate hard drive mounts it, and opens it in a file browser. You can now move files to this hard drive by drag-and-drop or copy-and-paste, both of which are done the same way they’re done in Windows. Once a hard drive, or other external storage device, is mounted, it will show up in the /media directory. To see a list of currently mounted storage devices, navigate to /media by clicking on File System in a File Browser window, and then double-clicking on the media folder. Right now, our media folder contains links to the hard drive, which Ubuntu has assigned a terribly uninformative label, and the PLoP Boot Manager CD that is currently in the CD-ROM drive. Connect a USB Hard Drive or Flash Drive An external USB hard drive gives you the advantage of portability, and is still large enough to store an entire hard disk dump, if need be. Flash drives are also very quick and easy to connect, though they are limited in how much they can store. When you plug a USB hard drive or flash drive in, Ubuntu should automatically detect it and mount it. It may even open it in a File Browser automatically. Since it’s been mounted, you will also see it show up on the desktop, and in the /media folder. Once it’s been mounted, you can access it and store files on it like you would any other folder in Ubuntu. If, for whatever reason, it doesn’t mount automatically, click on Places in the top-left of your screen and select your USB device. If it does not show up in the Places list, then you may need to format your USB drive. To properly remove the USB drive when you’re done moving files, right click on the desktop icon or the folder in /media and select Safely Remove Drive. If you’re not given that option, then Eject or Unmount will effectively do the same thing. Connect to a Windows PC on your Local Network If you have another PC or a laptop connected through the same router (wired or wireless) then you can transfer files over the network relatively quickly. To do this, we will share one or more folders from the machine booted up with the Ubuntu Live CD over the network, letting our Windows PC grab the files contained in that folder. As an example, we’re going to share a folder on the desktop called ToShare. Right-click on the folder you want to share, and click Sharing Options. A Folder Sharing window will pop up. Check the box labeled Share this folder. A window will pop up about the sharing service. Click the Install service button. Some files will be downloaded, and then installed. When they’re done installing, you’ll be appropriately notified. You will be prompted to restart your session. Don’t worry, this won’t actually log you out, so go ahead and press the Restart session button. The Folder Sharing window returns, with Share this folder now checked. Edit the Share name if you’d like, and add checkmarks in the two checkboxes below the text fields. Click Create Share. Nautilus will ask your permission to add some permissions to the folder you want to share. Allow it to Add the permissions automatically. The folder is now shared, as evidenced by the new arrows above the folder’s icon. At this point, you are done with the Ubuntu machine. Head to your Windows PC, and open up Windows Explorer. Click on Network in the list on the left, and you should see a machine called UBUNTU in the right pane. Note: This example is shown in Windows 7; the same steps should work for Windows XP and Vista, but we have not tested them. Double-click on UBUNTU, and you will see the folder you shared earlier! As well as any other folders you’ve shared from Ubuntu. Double click on the folder you want to access, and from there, you can move the files from the machine booted with Ubuntu to your Windows PC. Upload to an Online Service There are many services online that will allow you to upload files, either temporarily or permanently. As long as you aren’t transferring an entire hard drive, these services should allow you to transfer your important files from the Ubuntu environment to any other machine with Internet access. We recommend compressing the files that you want to move, both to save a little bit of bandwidth, and to save time clicking on files, as uploading a single file will be much less work than a ton of little files. To compress one or more files or folders, select them, and then right-click on one of the members of the group. Click Compress…. Give the compressed file a suitable name, and then select a compression format. We’re using .zip because we can open it anywhere, and the compression rate is acceptable. Click Create and the compressed file will show up in the location selected in the Compress window. Dropbox If you have a Dropbox account, then you can easily upload files from the Ubuntu environment to Dropbox. There is no explicit limit on the size of file that can be uploaded to Dropbox, though a free account begins with a total limit of 2 GB of files in total. Access your account through Firefox, which can be opened by clicking on the Firefox logo to the right of the System menu at the top of the screen. Once into your account, press the Upload button on top of the main file list. Because Flash is not installed in the Live CD environment, you will have to switch to the basic uploader. Click Browse…find your compressed file, and then click Upload file. Depending on the size of the file, this could take some time. However, once the file has been uploaded, it should show up on any computer connected through Dropbox in a matter of minutes. Google Docs Google Docs allows the upload of any type of file – making it an ideal place to upload files that we want to access from another computer. While your total allocation of space varies (mine is around 7.5 GB), there is a per-file maximum of 1 GB. Log into Google Docs, and click on the Upload button at the top left of the page. Click Select files to upload and select your compressed file. For safety’s sake, uncheck the checkbox concerning converting files to Google Docs format, and then click Start upload. Go Online – Through FTP If you have access to an FTP server – perhaps through your web hosting company, or you’ve set up an FTP server on a different machine – you can easily access the FTP server in Ubuntu and transfer files. Just make sure you don’t go over your quota if you have one. You will need to know the address of the FTP server, as well as the login information. Click on Places > Connect to Server… Choose the FTP (with login) Service type, and fill in your information. Adding a bookmark is optional, but recommended. You will be asked for your password. You can choose to remember it until you logout, or indefinitely. You can now browse your FTP server just like any other folder. Drop files into the FTP server and you can retrieve them from any computer with an Internet connection and an FTP client. Conclusion While at first the Ubuntu Live CD environment may seem claustrophobic, it has a wealth of options for connecting to peripheral devices, local computers, and machines on the Internet – and this article has only scratched the surface. Whatever the storage medium, Ubuntu’s got an interface for it! Similar Articles Productive Geek Tips Backup Your Windows Live Writer SettingsMove a Window Without Clicking the Titlebar in UbuntuRecover Deleted Files on an NTFS Hard Drive from a Ubuntu Live CDCreate a Bootable Ubuntu USB Flash Drive the Easy WayReset Your Ubuntu Password Easily from the Live CD TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Tech Fanboys Field Guide Check these Awesome Chrome Add-ons iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools Track Daily Goals With 42Goals

    Read the article

  • ubuntu one not syncing

    - by Martin
    I am really starting to despair as I have been trying ubuntu one for several months, trying it on several machines, and it has caused me loads of different issues wasting me a lot of time. It is not straight forward to use, it should be a piece of software that runs in background and users should not think about checking all the time if it is really doing it's job. Of course I have been searching around this website and other forums but couldn't find an answer to my situation. Yesterday I had several problems with the client not syncing and using a lot of the machine's RAM, up and CPU. I had to reboot on several occasions and leave the office's PC on overnight in order to sync a few files of not more than a few MB. Today I am experiencing another problem: I have decided to do a test putting a small file in my ubuntu one shared folder. Ubuntu one is not detecting it (now already more than an hour), therefore not uploading it to the server. martin@ubuntu-desktop:~$ u1sdtool --status State: QUEUE_MANAGER connection: With User With Network description: processing the commands pool is_connected: True is_error: False is_online: True queues: IDLE and martin@ubuntu-desktop:~$ u1sdtool --current-transfers Current uploads: 0 Current downloads: 0 I am running Ubuntu 11.04 64 with all recent updates. On my other machine the transfer of files seems to be completely frozen, with around 10 files in the queue but no transfer whatsoever. Another curious issue is on my Ubuntu 10.10 laptop where ubuntu one seems to have completly disappeared from Nautilus context menu, folder/file sync status icons missing. I have therefore been forced to upgrade to 11.04 on this machine. Anyway, now I would like to solve the ** processing the commands pool ** issue and make sure the client

    Read the article

  • Can I use Ubuntu One to sync data fiies between two remote computers

    - by Sleepy John
    I've got two computers, both running Ubuntu with files in their home folders sync'd in to Ubuntu One. I'd like to know if it's possible to make Ubuntu One automatically download data changes that have been uploaded automatically to Ubuntu One from one computer to the equivalent data file in the other. Clarifying a bit further, I've installed Red Notebook in both computers and so they each have their own /.rednotebook/data folder containing a series of .txt files corresponding to the monthly entries in each of them. These are sync'd to upload any changes to those .txt files to Ubuntu One. My question is can I, and if so how, do I make Ubuntu One automatically download and replace those .txt files in the other computer after they've been updated and uploaded from the first computer? I did labouriously manage to download all those text files which had been uploaded from the first computer, from Ubuntu One one-by-one to the second computer, but what I want to do is automate this process and that's where I'm stuck. I'm aware that things could get a bit complicated if both my computers were on-line at the same time and both were simultaneously making different Red Notebook entries, so that's not the scenario I'm trying to cover. All I want to achieve is that whatever updates to the files have been uploaded by one computer, will automatically be downloaded to the same-named files in the other computer as soon as that second computer appears on line and detects that Ubuntu One has matching but more recent sync'd files than the ones it's holding.

    Read the article

  • Cant install software

    - by user53209
    So I just installed the ubuntu 11.10 .. And when i goto software center and try to download any software(use source).. all i get is a window saying that "Failed to download repository information" , "check your internet connection" and W:Failed to fetch bzip2:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_oneiric_restricted_binary-i386_Packages Hash Sum mismatch , W:Failed to fetch bzip2:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_oneiric_universe_binary-i386_Packages Hash Sum mismatch , W:Failed to fetch bzip2:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_oneiric_multiverse_binary-i386_Packages Hash Sum mismatch , W:Failed to fetch htt p ://archive.ubuntu.com/ubuntu/dists/oneiric/main/i18n/Index No Hash entry in Release file /var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_oneiric_main_i18n_Index , W:Failed to fetch http ://archive.ubuntu.com/ubuntu/dists/oneiric/multiverse/i18n/Index No Hash entry in Release file /var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_oneiric_multiverse_i18n_Index , W:Failed to fetch htt ://archive.ubuntu.com/ubuntu/dists/oneiric/restricted/i18n/Index No Hash entry in Release file /var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_oneiric_restricted_i18n_Index , W:Failed to fetch ht tp://archive.ubuntu.com/ubuntu/dists/oneiric/universe/i18n/Index No Hash entry in Release file /var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_oneiric_universe_i18n_Index , W:Failed to fetch bzip2:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_oneiric-updates_main_source_Sources Hash Sum mismatch , W:Failed to fetch bzip2:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_oneiric-updates_restricted_binary-i386_Packages Hash Sum mismatch , W:Failed to fetch bzip2:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_oneiric-updates_universe_binary-i386_Packages Hash Sum mismatch , W:Failed to fetch bzip2:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_oneiric-updates_multiverse_binary-i386_Packages Hash Sum mismatch , W:Failed to fetch h tp://archive.ubuntu.com/ubuntu/dists/oneiric-updates/main/i18n/Index No Hash entry in Release file /var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_oneiric-updates_main_i18n_Index , W:Failed to fetch h ttp://archive.ubuntu.com/ubuntu/dists/oneiric-updates/multiverse/i18n/Index No Hash entry in Release file /var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_oneiric-updates_multiverse_i18n_Index , W:Failed to fetch ht tp://archive.ubuntu.com/ubuntu/dists/oneiric-updates/restricted/i18n/Index No Hash entry in Release file /var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_oneiric-updates_restricted_i18n_Index , W:Failed to fetch htt p://archive.ubuntu.com/ubuntu/dists/oneiric-updates/universe/i18n/Index No Hash entry in Release file /var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_oneiric-updates_universe_i18n_Index , W:Failed to fetch bzip2:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_oneiric-backports_main_source_Sources Hash Sum mismatch , W:Failed to fetch bzip2:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_oneiric-backports_restricted_binary-i386_Packages Hash Sum mismatch , W:Failed to fetch bzip2:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_oneiric-backports_universe_binary-i386_Packages Hash Sum mismatch , W:Failed to fetch bzip2:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_oneiric-backports_multiverse_binary-i386_Packages Hash Sum mismatch , W:Failed to fetch h ttp://archive.ubuntu.com/ubuntu/dists/oneiric-backports/main/i18n/Index No Hash entry in Release file /var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_oneiric-backports_main_i18n_Index , W:Failed to fetch h ttp://archive.ubuntu.com/ubuntu/dists/oneiric-backports/multiverse/i18n/Index No Hash entry in Release file /var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_oneiric-backports_multiverse_i18n_Index , W:Failed to fetch ht tp://archive.ubuntu.com/ubuntu/dists/oneiric-backports/restricted/i18n/Index No Hash entry in Release file /var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_oneiric-backports_restricted_i18n_Index , W:Failed to fetch ht tp://archive.ubuntu.com/ubuntu/dists/oneiric-backports/universe/i18n/Index No Hash entry in Release file /var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_oneiric-backports_universe_i18n_Index , W:Failed to fetch bzip2:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_oneiric-security_main_source_Sources Hash Sum mismatch , E:Some index files failed to download. They have been ignored, or old ones used instead." Neglect the http typos, its to evade the 2 hyperlink.. I tried making a file in the apt.conf.d folder also, and added proxy entries, also set the system proxy.. and also the "network proxy", but nothing works.. And now I cant install any software!! Help needed

    Read the article

  • Ubuntu one, music streaming

    - by iknowshall
    I'm running Ubuntu 11.10, and just signed up for Ubuntu One and Ubuntu One Music. Generally file sync is working fine, but music has been a complete failure so far. Here's what I'm looking at: After 24 hours, not a single mp3 or ogg file from my laptop has sync'd to the Cloud Music folder. I have 4 gigs of data used, which is definitely not enough to include music files. That's about the right amount for my docs and photos. With music, it should be more like 13 gigs. No music shows up on the Ubuntu One Music app on my phone, nor on the web view of my Ubuntu One Cloud folder I followed all the online instructions I could find. Basically, on my laptop, right click on the Music folder and select "Ubuntu One Synchronize this folder" The Music folder now has a green check mark on it indicating its sync'd The Ubuntu One app on my laptop says "File Sync is up to date" I did provide credit card information, and on the Ubuntu One website "Music Streaming" is listed as one of my services. So what am I doing wrong? Just read this post as I'm experiencing the same problem, the answer for this post says that due to the large number of files trying to be uploaded, that it could take up to a week. However I am, as above also being told that "File sync is up to date" Can somebody confirm that this is a bug and that I just need to wait for File sync to actually be up to date? Cheers

    Read the article

  • How to list all my packages from command line which can show package name, license, source url, etc?

    - by YumYumYum
    How to get all the installed package list with there license, source url? Such as following only shows name of the package only. $ dpkg --get-selections acpi-support install acpid install adduser install adium-theme-ubuntu install aisleriot install alacarte install For example in Fedora/CentOS (RED HAT LINUX BRANCH), you can see that: $ yum info busybox Loaded plugins: auto-update-debuginfo, langpacks, presto, refresh-packagekit Available Packages Name : busybox Arch : i686 Epoch : 1 Version : 1.18.2 Release : 5.fc15 Size : 615 k Repo : updates Summary : Statically linked binary providing simplified versions of system commands URL : http://www.busybox.net License : GPLv2 Description : Busybox is a single binary which includes versions of a large number : of system commands, including a shell. This package can be very : useful for recovering from certain types of system failures, : particularly those involving broken shared libraries. Follow up: /var/lib/apt/lists$ ls extras.ubuntu.com_ubuntu_dists_natty_main_binary-amd64_Packages extras.ubuntu.com_ubuntu_dists_natty_main_source_Sources extras.ubuntu.com_ubuntu_dists_natty_Release extras.ubuntu.com_ubuntu_dists_natty_Release.gpg lock partial security.ubuntu.com_ubuntu_dists_natty-security_main_binary-amd64_Packages security.ubuntu.com_ubuntu_dists_natty-security_main_source_Sources security.ubuntu.com_ubuntu_dists_natty-security_multiverse_binary-amd64_Packages security.ubuntu.com_ubuntu_dists_natty-security_multiverse_source_Sources security.ubuntu.com_ubuntu_dists_natty-security_Release security.ubuntu.com_ubuntu_dists_natty-security_Release.gpg security.ubuntu.com_ubuntu_dists_natty-security_restricted_binary-amd64_Packages security.ubuntu.com_ubuntu_dists_natty-security_restricted_source_Sources security.ubuntu.com_ubuntu_dists_natty-security_universe_binary-amd64_Packages security.ubuntu.com_ubuntu_dists_natty-security_universe_source_Sources us.archive.ubuntu.com_ubuntu_dists_natty_main_binary-amd64_Packages us.archive.ubuntu.com_ubuntu_dists_natty_main_source_Sources us.archive.ubuntu.com_ubuntu_dists_natty_multiverse_binary-amd64_Packages us.archive.ubuntu.com_ubuntu_dists_natty_multiverse_source_Sources us.archive.ubuntu.com_ubuntu_dists_natty_Release us.archive.ubuntu.com_ubuntu_dists_natty_Release.gpg us.archive.ubuntu.com_ubuntu_dists_natty_restricted_binary-amd64_Packages us.archive.ubuntu.com_ubuntu_dists_natty_restricted_source_Sources us.archive.ubuntu.com_ubuntu_dists_natty_universe_binary-amd64_Packages us.archive.ubuntu.com_ubuntu_dists_natty_universe_source_Sources us.archive.ubuntu.com_ubuntu_dists_natty-updates_main_binary-amd64_Packages us.archive.ubuntu.com_ubuntu_dists_natty-updates_main_source_Sources us.archive.ubuntu.com_ubuntu_dists_natty-updates_multiverse_binary-amd64_Packages us.archive.ubuntu.com_ubuntu_dists_natty-updates_multiverse_source_Sources us.archive.ubuntu.com_ubuntu_dists_natty-updates_Release us.archive.ubuntu.com_ubuntu_dists_natty-updates_Release.gpg us.archive.ubuntu.com_ubuntu_dists_natty-updates_restricted_binary-amd64_Packages us.archive.ubuntu.com_ubuntu_dists_natty-updates_restricted_source_Sources us.archive.ubuntu.com_ubuntu_dists_natty-updates_universe_binary-amd64_Packages us.archive.ubuntu.com_ubuntu_dists_natty-updates_universe_source_Sources

    Read the article

  • Ubuntu One Sync as a File Backup Solution?

    - by Jeff
    I was hoping to utilize Ubuntu One and in particular, the syncing feature within Ubuntu One to provide offsite backup for some of my files. My intention was to mark any of my folders that have important files as 'folders to synchronize' to Ubuntu One. It works great in that whenever an important file is placed in the folder, the file is copied up to Ubuntu One (hence creating a backup). However, if any of these important files are lost or accidently deleted from my computer then due to the synchronization it is also immediately deleted from Ubuntu One. This approach does not work very well to provide backup. On one hand I really like the automatic way in which the synch feature will upload any of my important files to Ubuntu One but on the other hand if I lose the file on my computer it will likely be taken off of the cloud as well (via synchronization). What approach are others taking to backup their important files to Ubuntu One? I didn't want to have to manually upload my important files to Ubuntu One and remember to upload other important files as they are created on my computer. Your thoughts and suggestions are greatly appreciated.

    Read the article

  • Grub doesn't show both Ubuntu installations

    - by jackweirdy
    I have a laptop with Ubuntu 12.04 LTS installed as the main OS. The other day I installed Ubuntu-Studio (version 12.04) into another partition on the machine. The installation went great and when the machine booted, the grub menu popped up and I could see the option for Ubuntu Studio and the vanilla Ubuntu OS'. The problem was that this version of grub, installed by the Studio installer, didn't look great and insisted on putting Studio at the top of the list, and therefore as the main OS to boot. I use the standard Ubuntu more often, so I booted into that and ran sudo grub-install dev/sda. That worked OK and now Ubuntu boots as normal. Only problem is that the Grub menu doesn't show up and doesn't give me a chance to choose the other OS. Running sudo os-prober shows that it can find ubuntu studio, it doesn't give me a chance to boot it. Any ideas as to how I can fix this problem? Cheers in advance. EDIT: followed instructions here and saw the boot menu, but the only boot options present were for the standard installation of Ubuntu.

    Read the article

  • How to configure a MInimal Ubuntu installation?

    - by Uri Herrera
    I recently re installed Ubuntu using the mini.iso, but much to my dismay the mini.iso is not configured the same way as the Ubuntu desktop ISO some "problems" I'm facing such as: An Installation using the regular Ubuntu CD recognizes my active network connections in Network Manager, Installing with the mini.iso gives me a working connection however no connections are "active" in Network Manager displaying the message "The system network services are not compatible with this version." In a regular Ubuntu install connecting an Android phone to the PC mounts the phone's internal memory and sd card if present, Using the mini.iso the phone is detected as it appears with the command lsusb but it's not mounted and can't be mounted. In the same regards using the phone to tether it's connection to the PC via USB, the phone is connected to my (wifi) IN the regular Ubuntu install the phone is recognized as a networking device and is used as connection usb0, while in the mini.iso nothing happens, and trying to add the connection to /etc/network/interfaces results in the OS crashing. Just to make sure It wasn't a matter of my user not having the correct permissions or a lack of "groups", I've checked with an Ubuntu VM and the groups are the same, the networking files are the same, and the packages (except those of ubuntu-desktop such as Unity, Firefox, LibreOffice, and other non-essential software) are Installed in my PC, so what else is there to look for?. I'm sure I'm missing something, and I'd prefer not to install Ubuntu again, using the regular cd. How can I manage to get the same behaviour/configuration without reinstalling ?

    Read the article

  • Can I Have Polymorphic Containers With Value Semantics in C++11?

    - by John Dibling
    This is a sequel to a related post which asked the eternal question: Can I have polymorphic containers with value semantics in C++? The question was asked slightly incorrectly. It should have been more like: Can I have STL containers of a base type stored by-value in which the elements exhibit polymorphic behavior? If you are asking the question in terms of C++, the answer is "no." At some point, you will slice objects stored by-value. Now I ask the question again, but strictly in terms of C++11. With the changes to the language and the standard libraries, is it now possible to store polymorphic objects by value in an STL container? I'm well aware of the possibility of storing a smart pointer to the base class in the container -- this is not what I'm looking for, as I'm trying to construct objects on the stack without using new. Consider if you will (from the linked post) as basic C++ example: #include <iostream> using namespace std; class Parent { public: Parent() : parent_mem(1) {} virtual void write() { cout << "Parent: " << parent_mem << endl; } int parent_mem; }; class Child : public Parent { public: Child() : child_mem(2) { parent_mem = 2; } void write() { cout << "Child: " << parent_mem << ", " << child_mem << endl; } int child_mem; }; int main(int, char**) { // I can have a polymorphic container with pointer semantics vector<Parent*> pointerVec; pointerVec.push_back(new Parent()); pointerVec.push_back(new Child()); pointerVec[0]->write(); pointerVec[1]->write(); // Output: // // Parent: 1 // Child: 2, 2 // But I can't do it with value semantics vector<Parent> valueVec; valueVec.push_back(Parent()); valueVec.push_back(Child()); // gets turned into a Parent object :( valueVec[0].write(); valueVec[1].write(); // Output: // // Parent: 1 // Parent: 2 }

    Read the article

  • Oracle Solaris: Zones on Shared Storage

    - by Jeff Victor
    Oracle Solaris 11.1 has several new features. At oracle.com you can find a detailed list. One of the significant new features, and the most significant new feature releated to Oracle Solaris Zones, is casually called "Zones on Shared Storage" or simply ZOSS (rhymes with "moss"). ZOSS offers much more flexibility because you can store Solaris Zones on shared storage (surprise!) so that you can perform quick and easy migration of a zone from one system to another. This blog entry describes and demonstrates the use of ZOSS. ZOSS provides complete support for a Solaris Zone that is stored on "shared storage." In this case, "shared storage" refers to fiber channel (FC) or iSCSI devices, although there is one lone exception that I will demonstrate soon. The primary intent is to enable you to store a zone on FC or iSCSI storage so that it can be migrated from one host computer to another much more easily and safely than in the past. With this blog entry, I wanted to make it easy for you to try this yourself. I couldn't assume that you have a SAN available - which is a good thing, because neither do I! What could I use, instead? [There he goes, foreshadowing again... -Ed.] Developing this entry reinforced the lesson that the solution to every lab problem is VirtualBox. Oracle VM VirtualBox (its formal name) helps here in a couple of important ways. It offers the ability to easily install multiple copies of Solaris as guests on top of any popular system (Microsoft Windows, MacOS, Solaris, Oracle Linux (and other Linuxes) etc.). It also offers the ability to create a separate virtual disk drive (VDI) that appears as a local hard disk to a guest. This virtual disk can be moved very easily from one guest to another. In other words, you can follow the steps below on a laptop or larger x86 system. Please note that the ability to use ZOSS to store a zone on a local disk is very useful for a lab environment, but not so useful for production. I do not suggest regularly moving disk drives among computers. In the method I describe below, that virtual hard disk will contain the zone that will be migrated among the (virtual) hosts. In production, you would use FC or iSCSI LUNs instead. The zonecfg(1M) man page details the syntax for each of the three types of devices. Why Migrate? Why is the migration of virtual servers important? Some of the most common reasons are: Moving a workload to a different computer so that the original computer can be turned off for extensive maintenance. Moving a workload to a larger system because the workload has outgrown its original system. If the workload runs in an environment (such as a Solaris Zone) that is stored on shared storage, you can restore the service of the workload on an alternate computer if the original computer has failed and will not reboot. You can simplify lifecycle management of a workload by developing it on a laptop, migrating it to a test platform when it's ready, and finally moving it to a production system. Concepts For ZOSS, the important new concept is named "rootzpool". You can read about it in the zonecfg(1M) man page, but here's the short version: it's the backing store (hard disk(s), or LUN(s)) that will be used to make a ZFS zpool - the zpool that will hold the zone. This zpool: contains the zone's Solaris content, i.e. the root file system does not contain any content not related to the zone can only be mounted by one Solaris instance at a time Method Overview Here is a brief list of the steps to create a zone on shared storage and migrate it. The next section shows the commands and output. You will need a host system with an x86 CPU (hopefully at least a couple of CPU cores), at least 2GB of RAM, and at least 25GB of free disk space. (The steps below will not actually use 25GB of disk space, but I don't want to lead you down a path that ends in a big sign that says "Your HDD is full. Good luck!") Configure the zone on both systems, specifying the rootzpool that both will use. The best way is to configure it on one system and then copy the output of "zonecfg export" to the other system to be used as input to zonecfg. This method reduces the chances of pilot error. (It is not necessary to configure the zone on both systems before creating it. You can configure this zone in multiple places, whenever you want, and migrate it to one of those places at any time - as long as those systems all have access to the shared storage.) Install the zone on one system, onto shared storage. Boot the zone. Provide system configuration information to the zone. (In the Real World(tm) you will usually automate this step.) Shutdown the zone. Detach the zone from the original system. Attach the zone to its new "home" system. Boot the zone. The zone can be used normally, and even migrated back, or to a different system. Details The rest of this shows the commands and output. The two hostnames are "sysA" and "sysB". Note that each Solaris guest might use a different device name for the VDI that they share. I used the device names shown below, but you must discover the device name(s) after booting each guest. In a production environment you would also discover the device name first and then configure the zone with that name. Fortunately, you can use the command "zpool import" or "format" to discover the device on the "new" host for the zone. The first steps create the VirtualBox guests and the shared disk drive. I describe the steps here without demonstrating them. Download VirtualBox and install it using a method normal for your host OS. You can read the complete instructions. Create two VirtualBox guests, each to run Solaris 11.1. Each will use its own VDI as its root disk. Install Solaris 11.1 in each guest.Install Solaris 11.1 in each guest. To install a Solaris 11.1 guest, you can either download a pre-built VirtualBox guest, and import it, or install Solaris 11.1 from the "text install" media. If you use the latter method, after booting you will not see a windowing system. To install the GUI and other important things, login and run "pkg install solaris-desktop" and take a break while it installs those important things. Life is usually easier if you install the VirtualBox Guest Additions because then you can copy and paste between the host and guests, etc. You can find the guest additions in the folder matching the version of VirtualBox you are using. You can also read the instructions for installing the guest additions. To create the zone's shared VDI in VirtualBox, you can open the storage configuration for one of the two guests, select the SATA controller, and click on the "Add Hard Disk" icon nearby. Choose "Create New Disk" and specify an appropriate path name for the file that will contain the VDI. The shared VDI must be at least 1.5 GB. Note that the guest must be stopped to do this. Add that VDI to the other guest - using its Storage configuration - so that each can access it while running. The steps start out the same, except that you choose "Choose Existing Disk" instead of "Create New Disk." Because the disk is configured on both of them, VirtualBox prevents you from running both guests at the same time. Identify device names of that VDI, in each of the guests. Solaris chooses the name based on existing devices. The names may be the same, or may be different from each other. This step is shown below as "Step 1." Assumptions In the example shown below, I make these assumptions. The guest that will own the zone at the beginning is named sysA. The guest that will own the zone after the first migration is named sysB. On sysA, the shared disk is named /dev/dsk/c7t2d0 On sysB, the shared disk is named /dev/dsk/c7t3d0 (Finally!) The Steps Step 1) Determine the name of the disk that will move back and forth between the systems. root@sysA:~# format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c7t0d0 /pci@0,0/pci8086,2829@d/disk@0,0 1. c7t2d0 /pci@0,0/pci8086,2829@d/disk@2,0 Specify disk (enter its number): ^D Step 2) The first thing to do is partition and label the disk. The magic needed to write an EFI label is not overly complicated. root@sysA:~# format -e c7t2d0 selecting c7t2d0 [disk formatted] FORMAT MENU: ... format fdisk No fdisk table exists. The default partition for the disk is: a 100% "SOLARIS System" partition Type "y" to accept the default partition, otherwise type "n" to edit the partition table. n SELECT ONE OF THE FOLLOWING: ... Enter Selection: 1 ... G=EFI_SYS 0=Exit? f SELECT ONE... ... 6 format label ... Specify Label type[1]: 1 Ready to label disk, continue? y format quit root@sysA:~# ls /dev/dsk/c7t2d0 /dev/dsk/c7t2d0 Step 3) Configure zone1 on sysA. root@sysA:~# zonecfg -z zone1 Use 'create' to begin configuring a new zone. zonecfg:zone1 create create: Using system default template 'SYSdefault' zonecfg:zone1 set zonename=zone1 zonecfg:zone1 set zonepath=/zones/zone1 zonecfg:zone1 add rootzpool zonecfg:zone1:rootzpool add storage dev:dsk/c7t2d0 zonecfg:zone1:rootzpool end zonecfg:zone1 exit root@sysA:~# oot@sysA:~# zonecfg -z zone1 info zonename: zone1 zonepath: /zones/zone1 brand: solaris autoboot: false bootargs: file-mac-profile: pool: limitpriv: scheduling-class: ip-type: exclusive hostid: fs-allowed: anet: ... rootzpool: storage: dev:dsk/c7t2d0 Step 4) Install the zone. This step takes the most time, but you can wander off for a snack or a few laps around the gym - or both! (Just not at the same time...) root@sysA:~# zoneadm -z zone1 install Created zone zpool: zone1_rpool Progress being logged to /var/log/zones/zoneadm.20121022T163634Z.zone1.install Image: Preparing at /zones/zone1/root. AI Manifest: /tmp/manifest.xml.RXaycg SC Profile: /usr/share/auto_install/sc_profiles/enable_sci.xml Zonename: zone1 Installation: Starting ... Creating IPS image Startup linked: 1/1 done Installing packages from: solaris origin: http://pkg.us.oracle.com/support/ DOWNLOAD PKGS FILES XFER (MB) SPEED Completed 183/183 33556/33556 222.2/222.2 2.8M/s PHASE ITEMS Installing new actions 46825/46825 Updating package state database Done Updating image state Done Creating fast lookup database Done Installation: Succeeded Note: Man pages can be obtained by installing pkg:/system/manual done. Done: Installation completed in 1696.847 seconds. Next Steps: Boot the zone, then log into the zone console (zlogin -C) to complete the configuration process. Log saved in non-global zone as /zones/zone1/root/var/log/zones/zoneadm.20121022T163634Z.zone1.install Step 5) Boot the Zone. root@sysA:~# zoneadm -z zone1 boot Step 6) Login to zone's console to complete the specification of system information. root@sysA:~# zlogin -C zone1 Answer the usual questions and wait for a login prompt. Then you can end the console session with the usual "~." incantation. Step 7) Shutdown the zone so it can be "moved." root@sysA:~# zoneadm -z zone1 shutdown Step 8) Detach the zone so that the original global zone can't use it. root@sysA:~# zoneadm list -cv ID NAME STATUS PATH BRAND IP 0 global running / solaris shared - zone1 installed /zones/zone1 solaris excl root@sysA:~# zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT rpool 17.6G 11.2G 6.47G 63% 1.00x ONLINE - zone1_rpool 1.98G 484M 1.51G 23% 1.00x ONLINE - root@sysA:~# zoneadm -z zone1 detach Exported zone zpool: zone1_rpool Step 9) Review the result and shutdown sysA so that sysB can use the shared disk. root@sysA:~# zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT rpool 17.6G 11.2G 6.47G 63% 1.00x ONLINE - root@sysA:~# zoneadm list -cv ID NAME STATUS PATH BRAND IP 0 global running / solaris shared - zone1 configured /zones/zone1 solaris excl root@sysA:~# init 0 Step 10) Now boot sysB and configure a zone with the parameters shown above in Step 1. (Again, the safest method is to use "zonecfg ... export" on sysA as described in section "Method Overview" above.) The one difference is the name of the rootzpool storage device, which was shown in the list of assumptions, and which you must determine by booting sysB and using the "format" or "zpool import" command. When that is done, you should see the output shown next. (I used the same zonename - "zone1" - in this example, but you can choose any valid zonename you want.) root@sysB:~# zoneadm list -cv ID NAME STATUS PATH BRAND IP 0 global running / solaris shared - zone1 configured /zones/zone1 solaris excl root@sysB:~# zonecfg -z zone1 info zonename: zone1 zonepath: /zones/zone1 brand: solaris autoboot: false bootargs: file-mac-profile: pool: limitpriv: scheduling-class: ip-type: exclusive hostid: fs-allowed: anet: linkname: net0 ... rootzpool: storage: dev:dsk/c7t3d0 Step 11) Attaching the zone automatically imports the zpool. root@sysB:~# zoneadm -z zone1 attach Imported zone zpool: zone1_rpool Progress being logged to /var/log/zones/zoneadm.20121022T184034Z.zone1.attach Installing: Using existing zone boot environment Zone BE root dataset: zone1_rpool/rpool/ROOT/solaris Cache: Using /var/pkg/publisher. Updating non-global zone: Linking to image /. Processing linked: 1/1 done Updating non-global zone: Auditing packages. No updates necessary for this image. Updating non-global zone: Zone updated. Result: Attach Succeeded. Log saved in non-global zone as /zones/zone1/root/var/log/zones/zoneadm.20121022T184034Z.zone1.attach root@sysB:~# zoneadm -z zone1 boot root@sysB:~# zlogin zone1 [Connected to zone 'zone1' pts/2] Oracle Corporation SunOS 5.11 11.1 September 2012 Step 12) Now let's migrate the zone back to sysA. Create a file in zone1 so we can verify it exists after we migrate the zone back, then begin migrating it back. root@zone1:~# ls /opt root@zone1:~# touch /opt/fileA root@zone1:~# ls -l /opt/fileA -rw-r--r-- 1 root root 0 Oct 22 14:47 /opt/fileA root@zone1:~# exit logout [Connection to zone 'zone1' pts/2 closed] root@sysB:~# zoneadm -z zone1 shutdown root@sysB:~# zoneadm -z zone1 detach Exported zone zpool: zone1_rpool root@sysB:~# init 0 Step 13) Back on sysA, check the status. Oracle Corporation SunOS 5.11 11.1 September 2012 root@sysA:~# zoneadm list -cv ID NAME STATUS PATH BRAND IP 0 global running / solaris shared - zone1 configured /zones/zone1 solaris excl root@sysA:~# zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT rpool 17.6G 11.2G 6.47G 63% 1.00x ONLINE - Step 14) Re-attach the zone back to sysA. root@sysA:~# zoneadm -z zone1 attach Imported zone zpool: zone1_rpool Progress being logged to /var/log/zones/zoneadm.20121022T190441Z.zone1.attach Installing: Using existing zone boot environment Zone BE root dataset: zone1_rpool/rpool/ROOT/solaris Cache: Using /var/pkg/publisher. Updating non-global zone: Linking to image /. Processing linked: 1/1 done Updating non-global zone: Auditing packages. No updates necessary for this image. Updating non-global zone: Zone updated. Result: Attach Succeeded. Log saved in non-global zone as /zones/zone1/root/var/log/zones/zoneadm.20121022T190441Z.zone1.attach root@sysA:~# zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT rpool 17.6G 11.2G 6.47G 63% 1.00x ONLINE - zone1_rpool 1.98G 491M 1.51G 24% 1.00x ONLINE - root@sysA:~# zoneadm -z zone1 boot root@sysA:~# zlogin zone1 [Connected to zone 'zone1' pts/2] Oracle Corporation SunOS 5.11 11.1 September 2012 root@zone1:~# zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT rpool 1.98G 538M 1.46G 26% 1.00x ONLINE - Step 15) Check for the file created on sysB, earlier. root@zone1:~# ls -l /opt total 1 -rw-r--r-- 1 root root 0 Oct 22 14:47 fileA Next Steps Here is a brief list of some of the fun things you can try next. Add space to the zone by adding a second storage device to the rootzpool. Make sure that you add it to the configurations of both zones! Create a new zone, specifying two disks in the rootzpool when you first configure the zone. When you install that zone, or clone it from another zone, zoneadm uses those two disks to create a mirrored pool. (Three disks will result in a three-way mirror, etc.) Conclusion Hopefully you have seen the ease with which you can now move Solaris Zones from one system to another.

    Read the article

  • Key-Based SSH Permission denied (publickey) Ubuntu 12-04

    - by user125176
    I have configured sshd to accept key-based ssh logins with LogLevel on DEBUG, and uploaded my public key to ~/.ssh.authorized_keys, where permissions are set as: 700 ~/.ssh 600 ~/.ssh/authorized_keys From root, I can su - USERNAME. From the client I get Permission denied (publicly). From the server Here's how it is telling me that it "Could not open authorized keys '/home/USERNAME/.ssh/authorized_keys': Permission denied". Client protocol version 2.0; client software version OpenSSH_5.2 match: OpenSSH_5.2 pat OpenSSH* Enabling compatibility mode for protocol 2.0 Local version string SSH-2.0-OpenSSH_5.9p1 Debian-5ubuntu1 permanently_set_uid: 105/65534 [preauth] list_hostkey_types: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 [preauth] SSH2_MSG_KEXINIT sent [preauth] SSH2_MSG_KEXINIT received [preauth] kex: client->server aes128-ctr hmac-md5 none [preauth] kex: server->client aes128-ctr hmac-md5 none [preauth] SSH2_MSG_KEX_DH_GEX_REQUEST received [preauth] SSH2_MSG_KEX_DH_GEX_GROUP sent [preauth] expecting SSH2_MSG_KEX_DH_GEX_INIT [preauth] SSH2_MSG_KEX_DH_GEX_REPLY sent [preauth] SSH2_MSG_NEWKEYS sent [preauth] expecting SSH2_MSG_NEWKEYS [preauth] SSH2_MSG_NEWKEYS received [preauth] KEX done [preauth] userauth-request for user USERNAME service ssh-connection method none [preauth] attempt 0 failures 0 [preauth] PAM: initializing for "USERNAME" PAM: setting PAM_RHOST to "USERHOSTNAME" PAM: setting PAM_TTY to "ssh" userauth_send_banner: sent [preauth] userauth-request for user USERNAME service ssh-connection method publickey [preauth] attempt 1 failures 0 [preauth] test whether pkalg/pkblob are acceptable [preauth] Checking blacklist file /usr/share/ssh/blacklist.RSA-4096 Checking blacklist file /etc/ssh/blacklist.RSA-4096 temporarily_use_uid: 1001/1002 (e=0/0) trying public key file /home/USERNAME/.ssh/authorized_keys Could not open authorized keys '/home/USERNAME/.ssh/authorized_keys': Permission denied restore_uid: 0/0 temporarily_use_uid: 1001/1002 (e=0/0) trying public key file /home/USERNAME/.ssh/authorized_keys2 Could not open authorized keys '/home/USERNAME/.ssh/authorized_keys2': Permission denied restore_uid: 0/0 Failed publickey for USERNAME from IPADDRESS port 57523 ssh2 Connection closed by IPADDRESS [preauth] do_cleanup [preauth] monitor_read_log: child log fd closed do_cleanup PAM: cleanup

    Read the article

  • Error trying to get tmux 1.6 installed - E: Unable to locate package libevent

    - by Michael Durrant
    $ pwd $ /home/durrantm/Downloads/tmux-1.6 durrantm.../tmux-1.6$ ./configure && make checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes ... ... configure: error: "libevent not found" durrantm.../tmux-1.6$ sudo apt-get install libevent Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package libevent

    Read the article

  • Can't start httpd 2.4.9 with self-signed SSL certificate

    - by Smollet
    I cannot start the httpd 2.4.9 (tried 2.4.x too) on CentOS 6.5 with the simplest SSL config possible. The openssl version installed on the machine is OpenSSL 1.0.1e-fips 11 Feb 2013 (I've upgraded it using 'yum update' to the latest patched version as well) I have compiled and installed the httpd 2.4.9 using the following commands: ./configure --enable-ssl --with-ssl=/usr/local/ssl/ --enable-proxy=shared --enable-proxy_wstunnel=shared --with-apr=apr-1.5.1/ --with-apr-util=apr-util-1.5.3/ make make install Now I'm generating the default self-signed certificate as described in the CentOS HowTo: openssl genrsa -out ca.key 2048 openssl req -new -key ca.key -out ca.csr openssl x509 -req -days 365 -in ca.csr -signkey ca.key -out ca.crt cp ca.crt /etc/pki/tls/certs cp ca.key /etc/pki/tls/private/ca.key cp ca.csr /etc/pki/tls/private/ca.csr Here is my httpd-ssl.conf file: Listen 443 SSLCipherSuite HIGH:MEDIUM:!aNULL:!MD5 SSLPassPhraseDialog builtin SSLSessionCache "shmcb:/usr/local/apache2/logs/ssl_scache(512000)" SSLSessionCacheTimeout 300 <VirtualHost *:443> SSLEngine on SSLCertificateFile /etc/pki/tls/certs/ca.crt SSLCertificateKeyFile /etc/pki/tls/private/ca.key <FilesMatch "\.(cgi|shtml|phtml|php)$"> SSLOptions +StdEnvVars </FilesMatch> <Directory "/usr/local/apache2/cgi-bin"> SSLOptions +StdEnvVars </Directory> BrowserMatch "MSIE [2-5]" \ nokeepalive ssl-unclean-shutdown \ downgrade-1.0 force-response-1.0 CustomLog "/usr/local/apache2/logs/ssl_request_log" \ "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b" </VirtualHost> when I start httpd using bin/apachectl -k start I get following errors in the error_log: Wed Jun 04 00:29:27.995654 2014] [ssl:info] [pid 24021:tid 139640404293376] AH01887: Init: Initializing (virtual) servers for SSL [Wed Jun 04 00:29:27.995726 2014] [ssl:info] [pid 24021:tid 139640404293376] AH01914: Configuring server 192.168.9.128:443 for SSL protocol [Wed Jun 04 00:29:27.995863 2014] [ssl:debug] [pid 24021:tid 139640404293376] ssl_engine_init.c(312): AH01893: Configuring TLS extension handling [Wed Jun 04 00:29:27.996111 2014] [ssl:debug] [pid 24021:tid 139640404293376] ssl_util_ssl.c(343): AH02412: [192.168.9.128:443] Cert matches for name '192.168.9.128' [subject: CN=192.168.9.128,OU=XXX,O=XXXX,L=XXXX,ST=NRW,C=DE / issuer: CN=192.168.9.128,OU=XXX,O=XXXX,L=XXXX,ST=NRW,C=DE / serial: AF04AF31799B7695 / notbefore: Jun 3 22:26:45 2014 GMT / notafter: Jun 3 22:26:45 2015 GMT] [Wed Jun 04 00:29:27.996122 2014] [ssl:info] [pid 24021:tid 139640404293376] AH02568: Certificate and private key 192.168.9.128:443:0 configured from /etc/pki/tls/certs/ca.crt and /etc/pki/tls/private/ca.key [Wed Jun 04 00:29:27.996209 2014] [ssl:info] [pid 24021:tid 139640404293376] AH01914: Configuring server 192.168.9.128:443 for SSL protocol [Wed Jun 04 00:29:27.996280 2014] [ssl:debug] [pid 24021:tid 139640404293376] ssl_engine_init.c(312): AH01893: Configuring TLS extension handling [Wed Jun 04 00:29:27.996295 2014] [ssl:emerg] [pid 24021:tid 139640404293376] AH02572: Failed to configure at least one certificate and key for 192.168.9.128:443 [Wed Jun 04 00:29:27.996303 2014] [ssl:emerg] [pid 24021:tid 139640404293376] SSL Library Error: error:0906D06C:PEM routines:PEM_read_bio:no start line (Expecting: DH PARAMETERS) -- Bad file contents or format - or even just a forgotten SSLCertificateKeyFile? [Wed Jun 04 00:29:27.996308 2014] [ssl:emerg] [pid 24021:tid 139640404293376] SSL Library Error: error:0906D06C:PEM routines:PEM_read_bio:no start line (Expecting: EC PARAMETERS) -- Bad file contents or format - or even just a forgotten SSLCertificateKeyFile? [Wed Jun 04 00:29:27.996318 2014] [ssl:emerg] [pid 24021:tid 139640404293376] SSL Library Error: error:140A80B1:SSL routines:SSL_CTX_check_private_key:no certificate assigned [Wed Jun 04 00:29:27.996321 2014] [ssl:emerg] [pid 24021:tid 139640404293376] AH02312: Fatal error initialising mod_ssl, exiting. AH00016: Configuration Failed I then try to generate missing DH PARAMETERS and EC PARAMETERS: openssl dhparam -outform PEM -out dhparam.pem 2048 openssl ecparam -out ec_param.pem -name prime256v1 cat dhparam.pem ec_param.pem >> /etc/pki/tls/certs/ca.crt And it mitigates the error but the next comes out: [Wed Jun 04 00:34:05.021438 2014] [ssl:info] [pid 24089:tid 140719371077376] AH01887: Init: Initializing (virtual) servers for SSL [Wed Jun 04 00:34:05.021487 2014] [ssl:info] [pid 24089:tid 140719371077376] AH01914: Configuring server 192.168.9.128:443 for SSL protocol [Wed Jun 04 00:34:05.021874 2014] [ssl:debug] [pid 24089:tid 140719371077376] ssl_engine_init.c(312): AH01893: Configuring TLS extension handling [Wed Jun 04 00:34:05.022050 2014] [ssl:debug] [pid 24089:tid 140719371077376] ssl_util_ssl.c(343): AH02412: [192.168.9.128:443] Cert matches for name '192.168.9.128' [subject: CN=192.168.9.128,OU=XXX,O=XXXX,L=XXXX,ST=NRW,C=DE / issuer: CN=192.168.9.128,OU=XXX,O=XXXX,L=XXXX,ST=NRW,C=DE / serial: AF04AF31799B7695 / notbefore: Jun 3 22:26:45 2014 GMT / notafter: Jun 3 22:26:45 2015 GMT] [Wed Jun 04 00:34:05.022066 2014] [ssl:info] [pid 24089:tid 140719371077376] AH02568: Certificate and private key 192.168.9.128:443:0 configured from /etc/pki/tls/certs/ca.crt and /etc/pki/tls/private/ca.key [Wed Jun 04 00:34:05.022285 2014] [ssl:debug] [pid 24089:tid 140719371077376] ssl_engine_init.c(1016): AH02540: Custom DH parameters (2048 bits) for 192.168.9.128:443 loaded from /etc/pki/tls/certs/ca.crt [Wed Jun 04 00:34:05.022389 2014] [ssl:debug] [pid 24089:tid 140719371077376] ssl_engine_init.c(1030): AH02541: ECDH curve prime256v1 for 192.168.9.128:443 specified in /etc/pki/tls/certs/ca.crt [Wed Jun 04 00:34:05.022397 2014] [ssl:info] [pid 24089:tid 140719371077376] AH01914: Configuring server 192.168.9.128:443 for SSL protocol [Wed Jun 04 00:34:05.022464 2014] [ssl:debug] [pid 24089:tid 140719371077376] ssl_engine_init.c(312): AH01893: Configuring TLS extension handling [Wed Jun 04 00:34:05.022478 2014] [ssl:emerg] [pid 24089:tid 140719371077376] AH02572: Failed to configure at least one certificate and key for 192.168.9.128:443 [Wed Jun 04 00:34:05.022488 2014] [ssl:emerg] [pid 24089:tid 140719371077376] SSL Library Error: error:140A80B1:SSL routines:SSL_CTX_check_private_key:no certificate assigned [Wed Jun 04 00:34:05.022491 2014] [ssl:emerg] [pid 24089:tid 140719371077376] AH02312: Fatal error initialising mod_ssl, exiting. AH00016: Configuration Failed I have tried to generate the simple certificate/key pair exactly as described in the httpd docs Unfortunately, I still get exact same errors as above. I've seen a bug report with the similar issue: https://issues.apache.org/bugzilla/show_bug.cgi?id=56410 But the openssl version I have is reported as working there. I've also tried to apply the patch from the report as well as build the latest 2.4.x branch with no success, I get the same errors as above. I have also tried to create a short chain of certificates and set the root CA certificate using SSLCertificateChainFile directive. That didn't help either, I get exact same errors as above. I'm not interested in setting up hardened security, etc. The only thing I need is to start httpd with the simplest SSL config possible to continue testing proxy config for the mod_proxy_wstunnel Had anybody encountered and solved this issue? Is my sequence for creating a self-signed certificate incorrect? I'd appreciate any help very much!

    Read the article

  • Ubuntu 10.04 external monitor problem

    - by Ricky
    I've just installed the 10.04 release on my laptop. I've also installed the nvidia propietary driver as suggested by the system. I've some problem using an external monitor, i'm not able to set the correct resolution using the nvidia-setting utiloty. It doesn't recognize the right resolution of my external monitor. Any advice please? :) I'm a newbie.

    Read the article

  • Unable to run Internet explorer 7 on Wine 1.2, ubuntu 8.04

    - by leva
    Following the instructions here: http://www.wine-reviews.net/wine-reviews/applications/ie-7-on-linux-with-wine.html I installed IE7. But when I run it with Wine 1.2 with: wine iexplore.exe& I get: Explorer$ fixme:system:SetProcessDPIAware stub! fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:advapi:RegisterTraceGuidsW (0x5b9f97, 0x6f4b08, {3e1fd72a-c323-4574-9917-5ce9c936f78c}, 1, 0x32f414, (null), (null), 0x6f4b10,) fixme:advapi:RegisterTraceGuidsW (0x5b9f97, 0x6f4b28, {afff9c82-5be3-4205-9b3e-49e014c09a63}, 1, 0x32f414, (null), (null), 0x6f4b30,) fixme:advapi:RegisterTraceGuidsW (0x6cd15f38, 0x6cd20180, {e2821408-c59d-418f-ad3f-aa4e792aeb79}, 1, 0x32f260, (null), (null), 0x6cd20188,) fixme:process:RegisterApplicationRestart (L"-restart /WERRESTART",0) err:ntdll:NtQueryInformationToken Unhandled Token Information class 18! fixme:ole:CoInitializeSecurity ((nil),-1,(nil),(nil),2,3,(nil),0,(nil)) - stub! fixme:advapi:RegisterTraceGuidsA (0x5e00187b, 0x5e0155f8, {1fb3f43f-4827-46e5-89e2-b398580357a3}, 1, 0x32da50, (null), (null), 0x5e015600,) fixme:advapi:RegisterTraceGuidsA (0x5e00187b, 0x5e015618, {7c0334a1-4635-4d95-8d76-9cf3171ac618}, 1, 0x32da50, (null), (null), 0x5e015620,) err:rebar:REBAR_WindowProc unknown msg 200b wp=00000000 lp=0050069c fixme:msimtf:DllGetClassObject ({50d5107a-d278-4871-8989-f4ceaaf59cfc} {00000001-0000-0000-c000-000000000046} 0x32dfb4) err:ole:apartment_getclassobject DllGetClassObject returned error 0x80040111 err:ole:CoGetClassObject no class object {50d5107a-d278-4871-8989-f4ceaaf59cfc} could be created for context 0x401 fixme:urlmon:ZoneMgrImpl_GetIESecurityState (0x143f20)->(1, 0x32c4b4, (nil), 0) stub fixme:urlmon:SecManagerImpl_ProcessUrlAction Unsupported arguments fixme:shdocvw:IEParseDisplayNameWithBCW stub: 0x0 L"http://go.microsoft.com/fwlink/?LinkId=74005" 0x14d030 0x32d560 err:comboex:COMBOEX_WindowProc unknown msg 200b wp=00000000 lp=0032dd20 err:toolbar:ToolbarWindowProc unknown msg 200b wp=00000000 lp=0032db18 err:ole:CoGetClassObject class {807c1e6c-1d00-453f-b920-b61bb7cdd997} not registered err:ole:CoGetClassObject no class object {807c1e6c-1d00-453f-b920-b61bb7cdd997} could be created for context 0x1 err:rebar:REBAR_WindowProc unknown msg 200b wp=00000000 lp=005a2b88 fixme:urlmon:SecManagerImpl_ProcessUrlAction Unsupported arguments fixme:shdocvw:IEParseDisplayNameWithBCW stub: 0x0 L"http://go.microsoft.com/fwlink/?LinkId=74005" 0x131468 0x158d2f4 err:comboex:COMBOEX_WindowProc unknown msg 200b wp=00000000 lp=0032de7c err:toolbar:ToolbarWindowProc unknown msg 200b wp=00000000 lp=0032dc74 fixme:urlmon:Uri_IsEqual (0x165ae8)->(0x165210 0x32c164) err:comboex:COMBOEX_WindowProc unknown msg 200b wp=00000000 lp=0032d6dc err:toolbar:ToolbarWindowProc unknown msg 200b wp=00000000 lp=0032d4d4 err:rebar:REBAR_WindowProc unknown msg 200b wp=00000000 lp=005a2b88 err:comboex:COMBOEX_WindowProc unknown msg 200b wp=00000000 lp=0032d6dc err:toolbar:ToolbarWindowProc unknown msg 200b wp=00000000 lp=0032d4d4 err:rebar:REBAR_WindowProc unknown msg 200b wp=00000000 lp=005a2b88 err:rebar:REBAR_WindowProc unknown msg 200b wp=00000000 lp=004a796c fixme:toolbar:TOOLBAR_CheckStyle [0x10122] TBSTYLE_REGISTERDROP not implemented fixme:toolbar:TOOLBAR_CheckStyle [0x10122] TBSTYLE_REGISTERDROP not implemented fixme:toolbar:TOOLBAR_Unkwn45D hwnd=0x10122, wParam=0x00000000, size.cx=1280, size.cy=1020 stub! fixme:toolbar:TOOLBAR_CheckStyle [0x10122] TBSTYLE_REGISTERDROP not implemented fixme:wininet:InternetSetOptionW Option INTERNET_OPTION_RESET_URLCACHE_SESSION: STUB fixme:urlmon:Uri_GetScheme (0x1728a8)->(0x32e310) fixme:urlmon:Uri_GetScheme (0x18e400)->(0x32e310) fixme:shell:SignalFileOpen (0x00000000):stub. fixme:ole:NdrCorrelationInitialize (0x158e808, 0x158e408, 1024, 0x0): stub fixme:rpc:NdrStubCall2 new correlation description not implemented fixme:ole:NdrCorrelationFree (0x158e808): stub fixme:ole:NdrCorrelationInitialize (0x32d098, 0x32cc98, 1024, 0x0): stub fixme:rpc:NdrStubCall2 new correlation description not implemented fixme:ole:NdrCorrelationFree (0x32d098): stub err:comboex:COMBOEX_WindowProc unknown msg 200b wp=00000000 lp=0032d02c err:toolbar:ToolbarWindowProc unknown msg 200b wp=00000000 lp=0032ce24 err:rebar:REBAR_WindowProc unknown msg 200b wp=00000000 lp=005a2b88 err:comboex:COMBOEX_WindowProc unknown msg 200b wp=00000000 lp=0032d52c err:toolbar:ToolbarWindowProc unknown msg 200b wp=00000000 lp=0032d324 err:rebar:REBAR_WindowProc unknown msg 200b wp=00000000 lp=005a2b88 fixme:shdocvw:IEParseDisplayNameWithBCW stub: 0x0 L"http://google.ca/" 0x197e00 0x17fe9e4 err:comboex:COMBOEX_WindowProc unknown msg 200b wp=00000000 lp=0032d48c err:toolbar:ToolbarWindowProc unknown msg 200b wp=00000000 lp=0032d284 err:rebar:REBAR_WindowProc unknown msg 200b wp=00000000 lp=005a2b88 err:comboex:COMBOEX_WindowProc unknown msg 200b wp=00000000 lp=0032d52c err:toolbar:ToolbarWindowProc unknown msg 200b wp=00000000 lp=0032d324 err:rebar:REBAR_WindowProc unknown msg 200b wp=00000000 lp=005a2b88 err:comboex:COMBOEX_WindowProc unknown msg 200b wp=00000000 lp=0032d4d4 err:toolbar:ToolbarWindowProc unknown msg 200b wp=00000000 lp=0032d2cc err:rebar:REBAR_WindowProc unknown msg 200b wp=00000000 lp=005a2b88 err:comboex:COMBOEX_WindowProc unknown msg 200b wp=00000000 lp=0032d52c err:toolbar:ToolbarWindowProc unknown msg 200b wp=00000000 lp=0032d324 err:rebar:REBAR_WindowProc unknown msg 200b wp=00000000 lp=005a2b88 err:comboex:COMBOEX_WindowProc unknown msg 200b wp=00000000 lp=0032d4d4 err:toolbar:ToolbarWindowProc unknown msg 200b wp=00000000 lp=0032d2cc err:rebar:REBAR_WindowProc unknown msg 200b wp=00000000 lp= And I am unable to open any webpages. How can I fix this?

    Read the article

  • Gnome-mount alternative in Ubuntu 10.04 or how to mount partition with normal user rights

    - by easyrider
    Hi, i was using gnome-mount to automount drives but in lucid it was removed. So is there any alternatives in lucid except editing fstab and programs that do so? Gnome-mount is a program which mounts disks using the same facilities as when mounting a disk as a normal user through Nautilus. There is no need to setup mountpoints or filesystems. This is particularly interesting if you want to use the automatically created mountpoints instead of manually specifying them for each disk.

    Read the article

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >