Search Results

Search found 36520 results on 1461 pages for 'default editing language'.

Page 540/1461 | < Previous Page | 536 537 538 539 540 541 542 543 544 545 546 547  | Next Page >

  • How to host multiple FLEX applications in IIS7

    - by Devtron
    Hello, I manually deploy a FLEX application to my web server (IIS 7). There are two virtual directories, 1.) Default 2.) myFlexApp1. myFlexApp1 is where my working FLEX application resides. I now need to deploy a different FLEX application (let's call it myFlexApp2) to the same web server. I set up a virtual directory for [myFlexApp2] and it complains about the "bindings" using port 80, which is already used by [myFlexApp1]. I have tried to give them separate host names in their bindings properties. For example, myFlexApp1.mydomain.com and myFlexApp2.mydomain.com. I can never get [myFlexApp2] to show from an external browser. I was able to get only one or the other to display, but never could run both. Here is what I need: myFlexApp1.mydomain.com -- myFlexApp1 calendar.mydomain.com -- myFlexApp2 test.mydomain.com -- myFlexApp1 where test.mydomain.com is the default URL. Is this possible? What am I doing wrong? I even tried to edit the hosts file in [C:\Windows\System32\drivers\etc] but that didnt work either. How can I serve up two FLEX applications on IIS 7? It shouldn't be this hard!

    Read the article

  • Enable SSL with Jetty 8

    - by Jerec TheSith
    I received certificates from GoDaddy an I'm trying to enable SSL with Jetty but receive an error 107 SSL protocol error when connecting to https://server.com:8443 I generated the keystore using these commands : keytool -keystore keystore -import -alias gd_bundle -trustcacerts -file gd_bundle.crt keytool -keystore keystore -import -alias server.com -trustcacerts -file server.com.crt and placed it in /opt/jetty/etc/ And used the following configuration in jetty.xml : <Call name="addConnector"> <Arg> <New class="org.eclipse.jetty.server.ssl.SslSelectChannelConnector"> <Arg> <New class="org.eclipse.jetty.http.ssl.SslContextFactory"> <Set name="keyStore"><SystemProperty name="jetty.home" default="."/>/etc/keystore</Set> <Set name="keyStorePassword">**password1**</Set> <Set name="keyManagerPassword">**password1**</Set> <Set name="trustStore"><SystemProperty name="jetty.home" default="."/>/etc/keystore</Set> <Set name="trustStorePassword">**password1**</Set> </New> </Arg> <Set name="port">8443</Set> <Set name="maxIdleTime">30000</Set> <Set name="Acceptors">2</Set> <Set name="statsOn">false</Set> <Set name="lowResourcesConnections">20000</Set> <Set name="lowResourcesMaxIdleTime">5000</Set> </New> </Arg> </Call> Am I missing something in jetty's configuration ?

    Read the article

  • SQL Management Studio is painfully slow on 32-bit Windows 7

    - by Sergei
    I've been having issues running anything in SQL Management Studio on Win 7. Basically, doing anything through the Management Studio interfaces completely freezes it up for a few minutes. Running a query is nearly impossible because it takes nearly 2 minutes just for the IDE to parse it and another minute to run it when the query itself completes instantaneously outside of the IDE. I'm not even going to go into the query designer. Anything with heavy user interaction such as editing a row in the result set where i have to click a cell freezes up the front-end. I tried reinstalling to no avail. Also tried running in compatibility mode without any difference whatsoever. Anybody had a similar experience? I'm running SQL Management Studio 2008 version 10.0.2531.0 on 32-bit Windows 7. Connecting to a remote SQL Server instance (2008 R2). Thanks.

    Read the article

  • Software for printing small photos on larger paper with easy layout snapping

    - by ldigas
    Have some photos and pictures to print (graphs, but that doesn't matter here). So far when printing I inserted them in MS Word, played with layout on the paper, and after half a day, finally managed to get it just right. Usually then, the power runs out :-) Anyways, does anyone know of any software which enables me to easily put up some kind of a layout (one under the other, or some rectangular grid) where I can just "snap" photos next to each other, before printing the whole thing. I know I can do that in pretty much any photo editing program, but the problem is that that pixel hunting takes time ... and is generally a very annoying process, expecially when you don't want to edit the photos in mind, just print them out. Anyways, I'm sure you get the general idea ... Suggestions ?

    Read the article

  • How to play 24 fps video smoothly on a 60Hz display? (or which player supports frame interpolation?)

    - by netvope
    I use mpc-hc to play videos on Win7 x64. With the default settings (#1), video playback is great most of the time. But for panning shots, playback is not smooth. I stepped through the video frame by frame and found that the panning movement is smooth (e.g. each frame shifts horizontally by 10 pixels), so the problem is how the 23.976 fps video is interpolated to 60Hz. The judder looks like what would be caused by a "2:3 pulldown", where the frames are played unevenly like: frame 1, 1, 2, 2, 2, 3, 3, 4, 4, 4, etc (#2) Using "optimal renderer settings" (#3) instead of the default disables the Aero theme and causes tearing. Setting my LCD display to 50Hz may have improved the judder slightly (but I can't really tell). My display does not support 24Hz or 48Hz, and forcing them in the Nvidia control panel gives blurry screen. I've tried other video players (VLC and KMPlayer), the ReClock Directshow Filter, video files from different sources (#4), turning on/off DXVA, and a computer with a different GPU, but the judder in the playback is similar. None of them solved the problem. So, how can I play 23.976 or 24 fps video smoothly on a 60Hz display? I think a video player could make the video smoother by doing linear interpolation, such as: 1. 100% frame 1 2. 60% frame 1 + 40% frame 2 3. 20% frame 1 + 80% frame 2 4. 80% frame 2 + 20% frame 3 5. 40% frame 2 + 60% frame 3 6. 100% frame 3 7. 60% frame 3 + 40% frame 4 .. etc Can any existing video player do this? Footnotes: (#1) Video renderer: EVR Custom Pres. (#2) This example converts a 24 fps video into 30 fps (#3) View Renderer settings Reset Reset to optimal renderer settings (#4) The files I have are all H.264 mkv files, but I don't think the file format/encoding matters.

    Read the article

  • Howto update Preview.app from the command line without losing focus on OSX ?

    - by snies
    Hello, i want to update Preview.app in the background from the command line without losing focus of my current window. I know that i can use the following to open/update the view of a file, but than i lose focus to the Preview.app. open -a Preview foo.pdf I guess there might be some clever Apple Script commands to do so but so far i didn't find the right one. Alternatively i would be interested into transfering the focus back to my current app directly after the update. I need this in order to update Preview.app's view of a pdf through a vi autocmd after i update the pdf according to changes in a tex file i am editing. Here is an example of what i want to achive but using Ubuntu and evince.

    Read the article

  • SQuirreL Client: Opening up a table in a separate tab

    - by Dalin Seivewright
    I've switched to SQuirrel Client to view an Oracle database with a variety of tables. At any given time, I need to look at the contents of several related tables at the same time. The problem is that, at least by default, SQuirrel Client does not open up multiple tables at a time. When you click on a different Table object, the main view is refreshed with newly selected table data. Oracle's SQLDeveloper (which I am trying to move away from) did this by default if I recall, but there was an option to "freeze" panes. Does a similar option exist in SQuirrel Client? I do not require the ability to view the contents of two different tables on the same screen (i.e. a split view) but I would like the ability to have tabs for each table so I can quickly switch between each table view rather then having to find the table in the table list over and over again. Note: I am using this in a professional capacity but if it does not "belong" here then I suppose it could be moved to superuser.

    Read the article

  • What is the correct root file to import to aptana from an xampp folder/existing web app or git repository?

    - by gaff
    Very noob question - all of this is new to me - not really sure how to get started. Overview: I'm taking over an existing wep project that has been developed in aptana and deployed in xampp setup - I also have access to Git repository on local directory. I want to import the web application into aptana, run it and begin updating/editing - bit of steep learning curve for me What is the best way to import? And what should I import? What should it look like in aptanan? I tried importing what I think is the root file from the git folder ("existing folder as new project")- it contains things like css, doc, img and js. This looks right to me - but might not be. Thanks, Gaff

    Read the article

  • Preventing ugly hyperlinks in Word-generated PDFs?

    - by Jay Levitt
    I'm creating a document in Word 2007 on Windows XP, and using the "Save As PDF" add-in. The document contains hyperlinks. When I open that PDF in Preview.app on a Mac (OS X 10.5.8), I see ugly boxes around all the hyperlinks. I've tried editing the PDF in Acrobat Pro 9.2.0 on the Mac, but the boxes don't show up there. If I select a hyperlink anyway with the Link Tool, right-click, and select "Properties..." no properties dialog ever appears. I want the links to be clickable, but I want them to look decent. How can I fix them? I don't have Acrobat for Windows.

    Read the article

  • Is it possible to upload only files that have been updated into a server?

    - by kamikaze_pilot
    Hi guys, Suppose I have a server accessible via FTP and it hosts websites Suppose I want to edit the website locally so it wont affect the site live, and suppose I edit a whole bunch of files, and I don't want to deal with the hassle of keeping track of which files I've edited all the time... Once I finished editing I want to upload it to the server via FTP....is there some FTP software that automatically detects which files have been edited and have only those files uploaded and overwritten rather than having me manually choosing the files I've edited (and hence having to keep track of edited files) or have me upload the entire site which is a waste of time thanks in advance

    Read the article

  • Is there a way to disable specific Spybot Immunization rules?

    - by Iszi
    I've been having problems using a desktop sharing application, which I've traced to the Immunization protections applied via Spybot S&D. Specifically, the problem has been narrowed down to the rules in the \SOFTWARE (Plugins) categories under the Internet Explorer groups. Once I disable these Immunization categories, everything in the application works fine. Each of these categories appears to include ~900 protections on the system. I suspect that the root cause of my problems could be narrowed down to just one, or perhaps a handful, of the settings that get applied in these categories. However, I can't find any options in Spybot S&D which would allow me to drill down to the individual protection rules and choose which to enable or disable. Is there something I'm missing, or is this not a feature available via the GUI? If it's not strictly supported in the application, is there a way to work around it by manually editing some of its files or registry settings? Spybot S&D version: 2.2.21.0 Spybot Start Center version: 2.2.21.129 Windows Ultimate x64

    Read the article

  • MySQL (local) owner and permissions

    - by Steve Nelson
    I asked this question on the MySQL forums and got no answer. I asked on StackOverflow and received a recommendation to try on ServerFault. So here I am. I recently successfully installed the 64 bit version of mysql-5.5.8 on a MacBook Pro in the /usr/local directory. To address a completely unrelated software (RVM actually) , I chown-ed my /usr/local directory to $USER, Which made MySQL very unhappy. It complained specifically about the /usr/local/mysql/data directory, so I chown-ed that directory to _mysql:wheel. Everything appears to work again, but it made me wonder if I would have been better off changing the owner of the whole /usr/local/mysql directory, not just the data subdirectory. Since I neglected to make notes of what owner the default installation runs under before rashly changing the owner of the /usr/local directory, could someone tell me what owner and permissions the /usr/local/mysql directory is by default if you don't inadvertently screw it up? :-/ In terms of permissions I'm guessing rwxr-xr-x would be appropriate (that's what the data directory currently has and it appears to be working fine), but reinforcement for that hunch would be appreciated. Thanks for any help. Steve

    Read the article

  • Last (I think and hope) problems configuring SSL certificate with Apache and VirtualHosts

    - by user65567
    Finally I set apache2 to get a single certificate for all subdomains. [...] # Go ahead and accept connections for these vhosts # from non-SNI clients SSLStrictSNIVHostCheck off # Apache setup which will listen for and accept SSL connections on port 443. Listen 443 # Listen for virtual host requests on all IP addresses NameVirtualHost *:443 # Because this virtual host is defined first, it will # be used as the default if the hostname is not received # in the SSL handshake, e.g. if the browser doesn't support # SNI. <VirtualHost *:443> ServerName domain.localhost DocumentRoot "/Users/<my_user_name>/Sites/domain/public" <Directory "/Users/<my_user_name>/Sites/domain/public"> Order allow,deny Allow from all </Directory> # SSL Configuration SSLEngine on ... </VirtualHost> <VirtualHost *:443> ServerName subdomain1.domain.localhost DocumentRoot "/Users/<my_user_name>/Sites/subdomain1/public" <Directory "/Users/<my_user_name>/Sites/subdomain1/public"> Order allow,deny Allow from all </Directory> # SSL Configuration SSLEngine on ... </VirtualHost> <VirtualHost *:443> ServerName subdomain2.domain.localhost DocumentRoot "/Users/<my_user_name>/Sites/subdomain2/public" <Directory "/Users/<my_user_name>/Sites/subdomain2/public"> Order allow,deny Allow from all </Directory> # SSL Configuration SSLEngine on ... </VirtualHost> So, for example, I can correctly access https://subdomain1.domain.localhost https://subdomain2.domain.localhost ... Now, anyway, I have problems on accessing http://subdomain1.domain.localhost http://subdomain2.domain.localhost ... Since I use a Mac Os, on accessing the "http: version", I get a default page "Your website." (instead of a error). Why does it happen?

    Read the article

  • How Can I prevent a specific application from being run on a specific machine using Group Policy?

    - by Mike
    I know this is possible to do and I am working on it with limited success. I believe the Group Policy I want is "Do Not Run Specified Windows Applications" - I can enable this and add the .exe I want to the list of programs not to be run. I have tried this on my local machine by running gpedit.msc going to User Config Admin Templates System and then choosing that policy and editing and enabling it. Doing it this way verifies that it works as I could then not run the specified .exe (XenAppWeb.exe) So this is great. I have created a GPO to do the same thing in GP Management on my domain controller where we centralize this, enforced it, applied it to an OU, and put one of our machines into this OU to test it. I have let it sit there for 3 days, run gpupdate /force, and when I try to run XenAppWeb.exe on this machine, it still lets me run it fine. What can I look at to troubleshoot this? I should note that I am trying to enact this policy on Windows XP machines (Virtual Machines) Thanks, Mike

    Read the article

  • netmask: command not found

    - by Ian R.
    I purchased a new server with a few ip's so I modified the /etc/network/interfaces file recently so that my ip's can go live. While editing that file I created a backup and deleted the original file. I recreated the interfaces file using the touch command and gave +x permissions but now, when trying to restart the interface (/etc/network/interfaces restart) I get all sorts of errors: /etc/network/interfaces: line 10: iface: command not found /etc/network/interfaces: line 11: address: command not found /etc/network/interfaces: line 12: netmask: command not found /etc/network/interfaces: line 13: auto: command not found Can any1 point what I forgot to do? Thanks.

    Read the article

  • Create a PDF that defaults to flip on short edge when printed double-sided

    - by user568458
    We're creating a 2-page PDF brochure with a target audience who will print it on their regular office or home printers. If it is printed on a double-sided printer (common in offices), it'll come out correctly if set manually by the user to "Flip on short edge", but will come out with the second page upside down if default settings are used (flip on long edge). Our target audience aren't very tech-literate, and we've found that even within our own office network there is variation in the location of the 'Flip on short edge' setting - so it isn't realistic to give everyone who downloads the PDF instructions on how to change this setting or to expect everyone to find out how to change the setting off their own backs. So, when creating a PDF (ideally using Adobe InDesign or Acrobat, but if other software or hacking is needed that's fine...), is there a way to configure the PDF file itself so that when printed double-sided with default settings, it flips on the short edge? If possible, it'll be useful supplementary info to know how reliable any such methods are across different PDF readers (e.g. Adobe Reader, Acrobat, Mac Preview, inbuilt browser readers (e.g. chrome), FoxIt, etc). If questions about content creation like this aren't a great fit here, feel free to migrate it to the graphic design stackexchange site - this question seems to fall half way between the two sites

    Read the article

  • How to bulk mail-enable contacts from AD in Exchange 2007?

    - by George Hewitt
    Hello, We have several thousand 'contacts' setup in AD already for a faxing system. We're migrating to an online fax provider that uses e-mail rather than plain old telephone. So, we've bulk edited all the AD records so that the 'mail' attribute is populated with the right e-mail address in the right format. Now, how do we enable these contacts within Exchange 2007? I've looked through http://technet.microsoft.com/en-us/library/bb684891.aspx but that only seems to talk about manually editing the CSV output to specify the external addresses. AD already knows the external e-mail addresses - I just need the info in Exchange! Any thoughts?

    Read the article

  • Nginx + Passenger running a RoR app is returning 401 when 302 is expected

    - by DBruns
    I've got a RoR app running on Passenger on top of Nginx. I'm using devise for my authentication method and have a link that gets sent in an email to users that requires authentication to view. If a user clicks the link from Outlook, and IE is the default browser, IE makes an HTTP request using the following headers: GET http://www.company.com/custom_layouts/108 HTTP/1.1 Accept: */* Accept-Language: en-us User-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.2; .NET4.0C; .NET4.0E) Accept-Encoding: gzip, deflate Connection: Keep-Alive Host: www.company.com Returning: HTTP/1.1 401 Unauthorized Content-Type: /; charset=utf-8 Transfer-Encoding: chunked Connection: keep-alive Status: 401 X-Powered-By: Phusion Passenger (mod_rails/mod_rack) 2.2.15 WWW-Authenticate: Basic realm="Application" Cache-Control: no-cache X-UA-Compatible: IE=Edge,chrome=1 Set-Cookie: _vxwer_session=[sessionstr]; path=/; HttpOnly X-Runtime: 0.011918 Server: nginx/0.7.67 + Phusion Passenger 2.2.15 (mod_rails/mod_rack) 31 You need to sign in or sign up before continuing. 0 When the exact same URL is typed into the address bar, it does this: GET http://www.company.com/custom_layouts/108 HTTP/1.1 Accept: image/jpeg, application/x-ms-application, image/gif, application/xaml+xml, image/pjpeg, application/x-ms-xbap, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */* Accept-Language: en-US User-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.2; .NET4.0C; .NET4.0E) Accept-Encoding: gzip, deflate Connection: Keep-Alive Host: www.company.com Returning: HTTP/1.1 302 Found Content-Type: text/html; charset=utf-8 Transfer-Encoding: chunked Connection: keep-alive Status: 302 X-Powered-By: Phusion Passenger (mod_rails/mod_rack) 2.2.15 Location: http://www.company.com/users/sign_in Cache-Control: no-cache X-UA-Compatible: IE=Edge,chrome=1 Set-Cookie: _xswer_session=[session_info_here]; path=/; HttpOnly X-Runtime: 0.010798 Server: nginx/0.7.67 + Phusion Passenger 2.2.15 (mod_rails/mod_rack) 6f <html><body>You are being <a href="http://www.company.com/users/sign_in">redirected</a>.</body></html> 0 I expect them to return the same thing regardless.

    Read the article

  • Different external ip addresses from different sites

    - by user630286
    My router is ClearOS 6(Centos 6). In my router, I have two external (internet) network connections from two ISP's. The primary connection is eth2 connected to a cable modem and the second one is ppp0 connected to a dsl modem. I have assigned eth2 as the primary connection (with a high metric value). In fact this is done through clearos's multiwan web interface. I have a test in my Nagios to monitor whether the primary connection. This connection is done based on the result of curl ifconfig.me But it seems that ifconfig.me is always giving the ip address of my secondary connection. I tested it through a browser. Yes ifconfig.me gives the secondary internet's(ppp0) ip address. But whatismyipaddress.[com|org] give my primary ip address (eth2). I checked the default route on the router through ip route list 0/0 which also shows the primary connection (eth2) as the default route. The traceroute www.google.com and traceroute ifconfig.me both seems to trace through the primary connection (eth2). As our secondary internet connection has only got a limited download, I don't want to end up having to pay a large sum at the end of the month. Has somebody got an idea why the ifconfig.me shows my secondary address? What is the best way to ensure that my router(and thus the lan) use the right internet connection.

    Read the article

  • Iptables Allow MYSQL server incoming requests

    - by thompatry
    I am trying to get my new MediaWiki server to allow connections to our MySql Server and right now I cannot get my iptables firewall set up right for this. The rule I am applying is the following iptables -A INPUT -p tcp -d 129.130.155.39 --dport 3306 -j ACCEPT # MySQL But my iptables log is still show that the connections can not be established and is being blocked/denied. Nov 21 09:48:39 hds-it kernel: Firewall Deny: [OUTPUT] IN= OUT=eth1 SRC=129.130.155.210 DST=129.130.155.39 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=29232 DF PROTO=TCP SPT=58862 DPT=3306 SEQ=914529531 ACK=0 WINDOW=14600 RES=0x00 SYN URGP=0 OPT (020405B40402080A03BCF2BC0000000001030307) When I turn off iptables, everything works as it should including editing the wiki database. What am I doing wrong with my rule.

    Read the article

  • Ok to edit task's xml file in c:\windows\system32\Tasks?

    - by Eyad
    I wrote a PowerShell script that check the executable in the < action tag for each task in the Task directory and mark the < enabled TRUEorFALSE< / enabled tag as false/true depending on the validity of the digital signature of the executable. After reading each task, the script re-saves the task file with the same name, type and location. Now my issue is that I get this message when I lunch task scheduler: “Task XYZ: The task image is corrupt or has been tampered with.” This message appears for all the tasks that were scanned and saved. Does editing task’s xml file directly corrupt the task? Is there any task decency that may cause this error(ex: registry value)?

    Read the article

< Previous Page | 536 537 538 539 540 541 542 543 544 545 546 547  | Next Page >