Search Results

Search found 28441 results on 1138 pages for 'ubuntu lts'.

Page 540/1138 | < Previous Page | 536 537 538 539 540 541 542 543 544 545 546 547  | Next Page >

• Installing gdm on headless Server Edition

  - by Andrew Koester

  I have Ubuntu Server running on a headless box, which is right now, almost entirely doing only software RAID and feels a little underused. I'd like to get into using Ubuntu as a desktop a little more. What do I need to do (install/etc.) to get Gnome while keeping the box itself headless? I'm not sure which packages to install or which steps to take. I figure I'll just use X over the network (Xming or the like) but something like NX might work.

  Read the article

• Hardware Compatibility

  - by thebradnet

  I am looking into buying a LENOVO RD330 SERVER with a ThinkServer RAID 500 Adapter II RAID controller. I am having problems finding out if all of the hardware that I am wanting will be compatible with Ubuntu. I have check the "Certified Hardware" list but the list is very limited. Both the computer and the RAID controller say they support RedHat and Suse but obviously Ubuntu isn't mentioned. I have talked with my vendor and they also not certain if this hardware will work. I have also Google around and the RAID controller appears to be an LSI chipset. But again I haven't been able to find any definitive information saying that this will work. Any suggestions on how I can find out if the hardware will work?

  Read the article

• Hybrid wireless network repeating

  - by Oli

  Summary: I'd like to use two Ubuntu computers to extend/compliment an existing wireless access point. I have a network which currently looks a bit like this: What the diagram doesn't show is the interference caused by our house. It's a wifi-blocking robot sent here from the past. The two wired computers are in areas where the signal is most blocked (not by design, just a happy co-incidence). Both wired computers have fairly good network cards. They're both Ubuntu machines and I would like to turn them into additional base stations. I know I could throw more networking hardware at this (network extenders or cable in additional, pure wireless access points) but I've got two Linux machines sitting in ideal places and I feel like they should be able to help me out. I've tried ad-hoc networks but I need something that is a lot more transparent (eg you can migrate from base to base without a connection dropping); it should look like one network to clients.

  Read the article

• HDMI audio output problems with Radeon card

  - by Matt Robinson

  No matter how much advice I follow, I still cannot get any audio to come out through my HDMI connection. I've tried downloading the latest proprietary FGLRX graphics drivers, and I've also gone into /etc/default/grub and altered GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" into this GRUB_CMDLINE_LINUX_DEFAULT="quiet splash radeon.audio=1" But still I cannot get any sound nor can I get HDMI sound output to show up in Sound Settings or Pulse Audio Volume Control. I can get video to show up just fine on my monitor through HDMI so I'm sure this problem is fixable! I know this is an old problem with Ubuntu, but any new strategies into the problem would be much appreciated. With that being said, here are some of my specs: Ubuntu 12.04 LTS AMD Radeon HD 7520G

  Read the article

• acer 1551 suspend/hibernate bug?

  - by user11050

  I put 64-bit Ubuntu 10.10 on my Acer 1551. It does not want to wake from suspend or hibernate. I have tried several different solutions to the apparent problem, but none have worked for me. Similar problem: Acer Aspire 1551 Will Not Wake After Suspend I tried what it suggested, no go. Also, I think it is taking my acer a while to boot-up what can I look into that may be causing it? I am new to ubuntu, and would like some help! thanks

  Read the article

• Strange GTK3 issue with Audacious and Evince (Document Viewer)

  - by Sman789

  I find that, in some GTK3 apps such as Audacious and Evince (Document Viewer), parts of the UI are pure black, which looks ugly and out-of-place. It is not intentional, as the screenshots on both websites show the app looking different. I only have this issue with the Adwaita GTK theme, but since it comes with Gnome 3 and is the main theme these apps are designed for, I'm guessing the problem is not simply the theme having some bug (though the Ubuntu package might). I have had this issue on two laptops now, running both Ubuntu 12.04 and Xubunu 12.10 with Gnome Shell and Adwaita. The screenshots below show the problem: Audcious's is visible in the search area around the text box, and behind the playlist tabs, and Evince's is visible in more or less the same position and around the document itself. Compare this from the Audacious homepage: With this image from my system: And Evince too:

  Read the article

• How to generate xorg.conf? (X -configure segfaults)

  - by Nicolas Raoul

  My video card is working fine, I have no screen problem. I am trying to generate an xorg.conf so I did: [ Logout ] sudo service gdm stop [ Move away xorg.conf.back and xorg.conf.fglrx-0 that were in /etc/X11 ] sudo dpkg-reconfigure xserver-xorg sudo X -configure But this last command segfaults: X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-27-server i686 Ubuntu Current Operating System: Linux nico 2.6.32-25-generic #44-Ubuntu SMP Fri Sep 17 20:26:08 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-25-generic root=UUID=7447ab16-3406-442d-81e5-bb6a2d795205 ro quiet splash Build Date: 21 July 2010 12:47:34PM xorg-server 2:1.7.6-2ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 15 16:06:11 2010 List of video drivers: i740 ark geode siliconmotion mach64 s3 r128 apm intel neomagic vesa trident chips s3virge fglrx sis savage rendition i128 tseng ztv mga openchrome radeon ati nv v4l vmware cirrus tdfx nouveau sisusb voodoo fbdev (EE) Can't load FireGL DRM library (libfglrxdrm.so). Backtrace: 0: X (xorg_backtrace+0x3b) [0x80e938b] 1: X (0x8048000+0x61c8d) [0x80a9c8d] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0x34d410] 3: X (xf86CallDriverProbe+0x182) [0x80b82d2] 4: X (DoConfigure+0x1c8) [0x816b898] 5: X (InitOutput+0x1da) [0x80b98aa] 6: X (0x8048000+0x1ebbb) [0x8066bbb] 7: /lib/tls/i686/cmov/libc.so.6 (__libc_start_main+0xe6) [0x467bd6] 8: X (0x8048000+0x1e961) [0x8066961] Segmentation fault at address (nil) Caught signal 11 (Segmentation fault). Server aborting Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. ddxSigGiveUp: Closing log Note the line Can't load FireGL DRM library (libfglrxdrm.so) Note: I do have file /usr/lib/fglrx/xorg/modules/linux/libfglrxdrm.so It is strange that it segfaults whereas I can use Gnome with no problem but well... Might be related: I tried to install the driver from ATI's website recently, and from then glxgears crashes at start. How can I generate xorg.conf in those conditions? It might or might not involve solving the segfault problem.

  Read the article

• Unable to install VMWare Workstation v8

  - by pst007x

  Installing VMware 8.0.2 64bit Ubuntu 12.04LTS 64bit BETA My Kernel version is: 3.2.0-20-generic pst007x@pst007x-Aspire-5741:~$ sudo sh VMware-Workstation-Full-8.0.2- 591240.x86_64.bundle Installs ok When I launch I am asked to install modules which are compiled and loaded into the running kernel. A window opens VMware Kernel Module Updater This fails on Virtual Network Device ERROR LOG. UPDATE: PATCH. When I try to add patch, following error: pst007x@pst007x-Aspire-5741:~$ sudo sh patch-modules_3.2.0.sh [sudo] password for pst007x: patch-modules_3.2.0.sh: 27: [: workstation8.0.2: unexpected operator patch-modules_3.2.0.sh: 28: [: workstation8.0.2: unexpected operator Sorry, this script is only for VMWare WorkStation 8.0.2 or VMWare Player 4.0.2. Exiting pst007x@pst007x-Aspire-5741:~$ I have fully un-installed, and re-installed. I am installing the correct version. Probably a problem with the patch. VMware installs perfectly on Ubuntu 11.10 This is how I uninstalled.

  Read the article

• hplip tries to print from photo tray

  - by James Bradbury

  I have hplip-3.14.4 with an HP Photosmart b210a and recently it has stopped printing properly. The issue is that it tries to print from the photo tray (which we don't use). I've tried setting this manually via the Settings page, but it makes no difference. My wife has the same issue (also using Ubuntu 12.04). EDIT: I've just set the printer up in Windows 7 and it works. So this is not a hardware fault and likely due to hplip or some Ubuntu software issue. Rolling back the driver to 3.13.8 does not make any difference. What else can I try

  Read the article

• Can not resolve hostnames on Xubuntu computers

  - by P Curtis

  I have a network of computers which has been running for many years. I have changed two of those to Xubuntu 11.10 and found I can no longer connect by ssh using the host-name from any other machine. I can connect and ping by IP although ping is very slow in one case (~200ms). All other machines are fine including another with Ubuntu 11.10. Host-name resolution works from Xubuntu machines to other networked machines. I am using wins resolution and have checked settings in /etc/nsswitch.conf are the same as my working Ubuntu systems. What is different in Xubuntu networking that I might have missed?

  Read the article

• Server and GUI?

  - by Kiara

  I have installed an Ubuntu Server. It obviously comes with no graphical interface. I tried to install it with: apt-get install xserver-xorg xfonts* gnome gdm Then I got an error message trying to login with Gnome and eventually I uninstalled everything: apt-get remove xserver-xorg xfonts* gnome gdm However, it seems Ubuntu still has some scripts trying to launch Gnome since when starting I get: Starting GNOME Display Manager fail ... Stopping system v run level compatibility And the system stops forever (I know I can use ALT+F1) What should I modify to have this completely uninstalled? I cannit find anything on the rc2.d...

  Read the article

• How to set the monitor to its native resolution when xrandr approach isn't working?

  - by Krishna Kant Sharma

  I am trying to setup my Samsung syncmaster B2030 monitor in ubuntu 12.04. It's native resolution is 1600x900 which I am not getting in ubuntu and which I am trying to get. I tried using xrandr approach provided in these urls: 1) http://www.ubuntugeek.com/how-change-display-resolution-settings-using-xrandr.html 2) How to set the monitor to its native resolution which is not listed in the resolutions list? S1) I used cvt 1600 900 60 to get the modeline. Output was: # 1600x900 59.95 Hz (CVT 1.44M9) hsync: 55.99 kHz; pclk: 118.25 MHz Modeline "1600x900_60.00" 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync S2) I then used xrandr and output was: Screen 0: minimum 8 x 8, current 1152 x 864, maximum 8192 x 8192 DVI-I-0 disconnected (normal left inverted right x axis y axis) VGA-0 connected 1152x864+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.0 + 1360x768 60.0 59.8 1152x864 60.0* 800x600 72.2 60.3 56.2 680x384 119.9 119.6 640x480 59.9 512x384 120.0 400x300 144.4 320x240 120.1 DVI-I-1 disconnected (normal left inverted right x axis y axis) HDMI-0 disconnected (normal left inverted right x axis y axis) which gave me "VGA-0". S3) Then I used xrandr --newmode "1600x900_60.00" 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync But instead of adding the modeline it just threw an error: X Error of failed request: BadName (named color or font does not exist) Major opcode of failed request: 153 (RANDR) Minor opcode of failed request: 16 (RRCreateMode) Serial number of failed request: 29 Current serial number in output stream: 29 My system details: 1) ubuntu 12.04 LTS 2) Graphic card: GeForce 9400 GT/PCIe/SSE2 (driver is successfully installed. I am checking it in System Settings Details. And it's showing that driver is installed and its "GeForce 9400 GT/PCIe/SSE2") 3) Monitor: Samsung syncmaster B2030 4) Resolutions I am getting: 800x600 1024x768 1152x864 (I am currently using this one) 1360x768 (this one isn't working properly) Does anyone know what I can do? Thanks in advance. UPDATE (1): Today I tried it again. And adding a modeline (using --newmode) worked. But when I used --addmode by: xrandr --addmode VGA-0 1600x900_60.00 It gave this error: X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 153 (RANDR) Minor opcode of failed request: 18 (RRAddOutputMode) Serial number of failed request: 29 Current serial number in output stream: 30

  Read the article

• Adding user to chroot environment

  - by Neo

  I've created a chroot system in my Ubuntu using schroot and debrootstrap, based on minimal ubuntu. However whenever I can't seem to add a new user into this chroot environment. Here is what happens. I enter schroot as root and add a new user 'Bob'.(Tried both adduser and useradd commands) The username 'Bob' lists up in /etc/passwd file and I can 'su' into the user 'Bob'. So far so good. When I log out of schroot, and re-enter schroot, the user 'Bob' has vanished!! There is no mention of Bob in /etc/passwd either. How do I make the new user permanent?

  Read the article

• Screen Lag/Running Slow

  - by Nick M

  I am having trouble with Ubuntu 12.10. Everything is working fine, although there is a slight problem. It seems to lag every once in a while, as in I will move the mouse, then about two seconds later the cursor will actually move on the screen. Is there any way to fix this? This is my first day using Ubuntu and I put it on a computer I built myself. I don't have much experience so a detailed answer would be very much appreciated.

  Read the article

• ImportError: No module named gtk

  - by Rick_2047

  after the debacle a few hours back I managed to get a working desktop after using an ethernet cable and sudo apt-get install ubuntu-desktop But now when I try to run ubuntu software center from CLI this is what I get rick@Abigail:~$ sudo software-center Traceback (most recent call last): File "/usr/bin/software-center", line 34, in <module> import gtk ImportError: No module named gtk Any guesses how to fix this. The search box on synaptic is also missing. It has something to do with module named axi. I think the both are related.

  Read the article

• Get the following error when running Software Updater

  - by Curtis Cox

  W:Failed to fetch cdrom://Ubuntu 12.10 Quantal Quetzal - Beta i386 (20120926)/dists/quantal/main/binary-i386/Packages Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs , W:Failed to fetch cdrom://Ubuntu 12.10 Quantal Quetzal - Beta i386 (20120926)/dists/quantal/restricted/binary-i386/Packages Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs , E:Some index files failed to download. They have been ignored, or old ones used instead.

  Read the article

• How can I prevent or diminish Nautilus freezing problems?

  - by Karthick Bala

  Hi, After upgrading the Ubuntu to 10.04 my Nautilus file manager gives lot of problem. Nautilus freezes after few minutes of start. I tried with Thunar, but I did not like that. Now I have Dolphin too, when Nautilus goes problem, then I start work with Dolphin. I do not like this. I want to work on Nautilus or equivalent one. I work with lot of images using GIMP and Inkscape. I tried many things including reinstalled the OS for 6 time in 4 months. I cannot leave Ubuntu, but I am limbing. Some body help me to fix it. Thanks in Advance.

  Read the article

• Cannot assign keys to Wacom scroll wheel anymore

  - by UncleZeiv

  Hi all, my Wacom Graphire 4 used to work perfectly well until, I think, Ubuntu 10.4. At that point something changed in the configuration and I couldn't assign a key to the scroll wheel anymore (note: the pad's scroll wheel, not the mouse's), i.e this command: xsetwacom set "Wacom Graphire4 6x8 pad" AbsWDn "key +" returns silently without error but nothing happens. Same goes for AbsWUp, RelWDn, RelWUp. Apparently though the problem is even deeper as pressing the wheel in a xev window doesn't seem to have any effect. Moreover I am thoroughly confused on how the various pieces (kernel driver, xorg driver, evdev, HAL, xinput?) are supposed to work together and if the wacom module that ships with Ubuntu is the one from linuxwacom or not. Any ideas? I don't want to become an X.org hacker just to understand what's going on... it used to work! NOTE: I have already read question 3940, but that's not the same problem.

  Read the article

• No sound from internal speaker but headphones OK

  - by Aris Boch

  The problem: The system won't play sound on the internal speaker of the laptop, but only on the headphone. When I put the headphone jack half in and fiddle around with it, then it'll play even on the internal speakers (the system apparently believes, that the headphone are in). What should I do? The technical data: Laptop modell Medion Erazer X6815 matatabisama@matatabisama-X6815:~/Downloads$ sudo aplay -l | egrep ^card card 0: PCH [HDA Intel PCH], device 0: ALC269VB Analog [ALC269VB Analog] card 0: PCH [HDA Intel PCH], device 1: ALC269VB Digital [ALC269VB Digital] card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Ubuntu 12.04 64 matatabisama@matatabisama-X6815:~/Downloads$ uname -a Linux matatabisama-X6815 3.2.0-30-generic #48-Ubuntu SMP Fri Aug 24 16:52:48 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

  Read the article

• Allow sudo on specific file from active directory group

  - by tubaguy50035

  I have an Ubuntu Server 12.04 box that has active directory integration running on it. I want to allow a certain active directory group access to execute a script as sudo. I want to do something like this: %programmers ALL=NOPASSWD: /usr/local/bin/createSambaShare.php When I log in with my active directory user and issue groups I do not see the group programmers, but I am a part of the programmers group within active directory. I've set up the group under the Unix attributes tab and given it an id of 1000 and added my user to it. My first thought was that I needed to add the group to the Ubuntu box. When I tried to do that, it told me that the programmers group already existed. What am I missing here?

  Read the article

• Can't boot without Flash Drive plugged in

  - by vlad

  (Sorry for my bad English) I had Ubuntu 12.04 Beta installed on my computer. When 12.04 was finally released, I made a bootable USB Flash Drive using Startup Disk Creator. Then I decided to check if this drive works properly and to reinstall the system on my desktop. I must add, my desktop behaves a bit strange when it comes to bootable USB's, it recognizes them as HDD. In BIOS I changed priority of boot so USB Flash Drive (recognized as HDD) was first. Successfully booted, I installed Ubuntu. Everything worked fine, but... Now I cannot boot from my real HDD. Every time I want to boot, I put the USB Flash Drive into my computer, boot, safely remove it and everything works. What have I to do, to repair boot? Thank you for your time!

  Read the article

• Kernel panic: "Machine check: processor context corrupt" after install

  - by Red

  I am new to Linux and I am having issues installing. I have tried multiple versions and all seem to give me the same issue. The LiveCD worked and I used it to install Ubuntu alongside Windows 7. Here's a few screen shots of what I get. I am currently trying to install most the most recent version of Ubuntu. System specs: x58 motherboard 12GB RAM Core i7 processor 2 Nvidia GTX 580 video cards in SLI configuration Thanks in advance and please feel free to simplify your answers as I am pretty new at this.

  Read the article

• How to recover password without restart

  - by Felix Erasmus

  So I recently installed Ubuntu on this computer, I just started using it today for the 2nd time, I needed to install some video plugins to use for the web and it asked me for a password. I do not remember ever setting a password during installation, and I am not asked for a password to login either. As far as I knew I never had a password before, is there a way to recover the user password from within ubuntu without entering into recovery mode? I do not see why I need to restart as I never need a password to start up the computer and log in...

  Read the article

• Why doesn't my graphic card software support 1280*1024?

  - by Allwar

  Hi, I have an external monitor which is an 20" 1280*1024. In windows 7 it works fine with that resolution but in ubuntu it can't. Example: In windows I connect it and activates it, done. In ubuntu I connect and the only resolution that is available is the ones my laptop screen support, 12" 1366*768. My laptop is an asus 1201n. If I force it to use 1280*1024 both screen crashes and i have to force a reboot. When I force it I only force the external monitor, the laptop is already at maximum 1366*768. I connect it throw VGA. ((The graphic card supports 1280*1024 in windows 7, #Fail)) alvar@alvars-laptop:~$ disper -l display DFP-0: HSD121PHW1 resolutions: 320x175, 320x200, 360x200, 320x240, 400x300, 416x312, 512x384, 640x350, 576x432, 640x400, 680x384, 720x400, 640x480, 720x450, 640x512, 700x525, 800x512, 840x525, 800x600, 960x540, 832x624, 1024x768, 1366x768 display CRT-0: CRT-0 resolutions: 320x240, 400x300, 512x384, 680x384, 640x480, 800x600, 1024x768, 1152x864, 1360x768

  Read the article

• What is the most reliable WiFi card?

  - by Kim Prince

  Which WiFi card is most reliable with Ubuntu, in particular V12.04? I have a ASUS PCE-N15 card which is dropping out intermittently. It has the RTL8188CE chipset, and I see that plenty of others have had a problem with this same chipset. I have tried building the custom drivers and a few other fixes, but still not reliable. So, I need to race out another card ASAP, but which card to buy? (I don't just want to select from the Ubuntu components list, since it is not infallible. For example, it says the RTL8188CE chips set works). Thanks!

  Read the article

< Previous Page | 536 537 538 539 540 541 542 543 544 545 546 547  | Next Page >