Search Results

Search found 29863 results on 1195 pages for 'version'.

Page 540/1195 | < Previous Page | 536 537 538 539 540 541 542 543 544 545 546 547  | Next Page >

  • Wireless does not work anymore after software update with Ubuntu 12.10 on a Dell Latitude E6230

    - by Andy
    I just installed Ubuntu 12.10 on my DELL Latitude E6230, on first boot wifi worked properly but when I updated the software it stopped working. I can't figure out the problem... The wireless network controller is a Broadcom Corporation BCM4313 802.11b/g/n Wireless Lan Controller (rev 01) "lshw -class network" gives, for the above controller: *-network UNCLAIMED description: Network controller product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f7d00000-f7d03fff After reading the answer to another similar question, I edited the file NetworkManager.conf to make "managed=true", but that did not make any difference, it is as if the wireless adapter were not there. In the "Network" setting window, I only see "Wired" and "Network proxy". Wireless has just disappeared: rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no and that's it! Nothing about the wireless controller... Any suggestions?

    Read the article

  • PL2303X driver for ubuntu

    - by kam
    I have 2 questions I hope someone is able to help me. I bought a usb/serial adapter based on PL2303X and not PL2303. 1- Do you know of any patches to make the PL2303X detectable and functional? 2- Assuming I got the patch, and before I apply it, I wanted to upgrade my kernel. I found this website http://www.unixmen.com/upgrade-your-kernel-the-safe-way-in-ubuntu-linuxmint/ to teach me to do so.. Is this a good procedure? and to what version you advise me to upgrade? Thanks.

    Read the article

  • have a missing file, and cant run ubuntu upon start up, and hasnt the flash drive i used didnt work either, any help?

    - by trent
    when I first downloaded Ubuntu to install it, it downloaded quick and caused no problems to my laptop. but then when it came time to install it as one of my operating systems, it wouldn't run because it said a file was missing or damaged. so then I uninstalled it and re-installed it but I still had that same problem. so I tried a flash-drive version but that didn't work either because it wouldn't boot from that, nor would it detect my flash drive, (in this case, an old 4 GB mp3 player). any help or tips and ideas would be great, I just need a decent operating system because windows is getting to be terrible at the moment, just note I wanna run Ubuntu along side windows 8.1

    Read the article

  • Google Chrome would not exist fullscreen mode

    - by siberan
    I am running 64-bit Ubuntu 13.10, have latest stable google-chrome version 30.0.1599.114-1. Whenever I enter fullscreen mode by pressing F11, it would never exit this mode by pressing F11. Actually, I see it exit but then fullscreen mode is quickly restored. I searched for a solution, but nothing really helps. I even tried completely re-installing it with no luck. Any suggestions? Update: I tried completely removing ~/.config/google-chrome, it did not help. Update 2: I am running Cinnamon 2.0.6, maybe that would give some clues. Thanks, Nick.

    Read the article

  • Disable outbound links without letting others know that

    - by tadoman
    Is there a way I can tell google not to follow external links ( pointing to other sites) without letting other know. I know you can disable outbound links by putting rel=nofollow or something in robots.txt. But that's something others can see as well. I'm just wondering if there's a way to tell google not to follow those links without letting others know that... like a setting in webmaster tools or something similar ( there's definetly one way. I could set an exception in my conf file for my server to check the user agent to be "googlebot" and then serve a different version of robots.txt. So that when a different user would check that link it would return a different robots.txt thant the one served to googlebot. However I'm not too sure google would be too happy about this) Thank you

    Read the article

  • Wifi problem in ubuntu using macbook pro when it restart

    - by Amro
    I was read that subject : http://ubuntuforums.org/showthread.php?t=2011756 and i follow it step by step in the page n 1 , then i was connect but after i restart my macbook again , i was lost the wifi connection.i dont know why or whats the problem exactly. every time I run this command: dmesg | grep -e b43 -e bcma I get this output: [ 2012.769684] bcma-pci-bridge 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2012.769701] bcma-pci-bridge 0000:02:00.0: setting latency timer to 64 [ 2012.769775] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x25, class 0x0) [ 2012.769808] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1D, class 0x0) [ 2012.769889] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x13, class 0x0) [ 2012.770175] bcma: PMU resource config unknown for device 0x4331 [ 2012.824527] bcma: Bus registered [ 2012.831744] b43-phy0: Broadcom 4331 WLAN found (core revision 29) [ 2013.371031] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07) and to get the connection again every time i must entery that code in the step of reload driver. How i can let the ubuntu see my wifi and wireless device automatically when i reboot my computer????

    Read the article

  • Why does qt-creator need to connect to google-analytics?

    - by Nanda
    I just installed qt-creator to work on non-qt C++ projects. The installed version is 2.5.0 (Based on Qt 4.8.2 32-bit) If I click on any of these pages: I get this error: I realized that /etc/hosts file has the following entry: 127.0.0.1 www.google-analytics.com I don't want to remove the entry from the hosts file because it's always been there along with thousands of other similar adservices/porn/malware addresses. I do not intend to say that qt-creator is looking to create problems in my computer, but I am genuinely interested to know why qt-creator needs to connect to google-analytics? Can this be disabled and qt-creator can still be functional?

    Read the article

  • Are there any good programs to learn Dvorak

    - by Alvar
    Hi, How do I learn Dvorak typing in Ubuntu? I have Ubuntu 10.04 and I'm planning to learn one of the Swedish dvorak versions. It's included in ubuntu 10.04. I used to play a game called Grand Prix Tycoon on mousebreaker.com . I know it's a silly game but if you use a game of some sort you can get better so much faster. A) Is there a program that I can use to learn Dvorak? B) Is there a game of some sort to learn Dvorak? C) Is the Swedish version I linked to supported?

    Read the article

  • Virtual Newsstand Displays Comic Books by Date

    - by Jason Fitzpatrick
    If you’re a comic book aficionado (or just want to take a stroll down memory lane), this virtual newsstand shows you all the comics published for any month and year going all the way back to the 1930s. Courtesy of Mike’s Amazing World of Comics, the virtual newsstand lets you dial in a month, year, sorting style, and shows all publishers or select publishers. The covers are displayed in a grid where you can click through to see a larger version of the cover and read additional information about the comic. It’s a really neat way to check out trends in comic design and artwork over the years. Hit up the link below to take it for the spin. Have a cool comic book resource to share? Sound off in the comments. The Newsstand [via Boing Boing] Why Enabling “Do Not Track” Doesn’t Stop You From Being Tracked HTG Explains: What is the Windows Page File and Should You Disable It? How To Get a Better Wireless Signal and Reduce Wireless Network Interference

    Read the article

  • New Paper on the PeopleSoft Interaction Hub-PeopleTools Relationship

    - by Matthew Haavisto
    A new paper has just been published that explains the relationships and dependencies between the PeopleSoft Interaction Hub (formerly the PeopleSoft Applications Portal), and PeopleTools.  This paper will help you understand which versions of the Hub work with which versions of Tools.  The paper contains information on how new customers can install the PeopleSoft Interaction Hub, and existing PeopleSoft Interaction Hub customers can apply PIH 9.1 Feature Pack 1 functionality if they are on an earlier version. It also describes how PeopleSoft Interaction Hub releases are aligned with PeopleTools releases, the general upgrade process within the Feature Pack model, and how customers can expect this to work with subsequent feature packs, maintenance packs, and bundles. You can get the paper from Oracle support.

    Read the article

  • Les pirates exploitent le succès de Windows 7 : après les fausses alertes de sécurité, Microsoft est

    Les pirates exploitent le succès commercial de Windows 7 Après les fausses alertes de sécurité, Microsoft est à nouveau victime de contrefaçon Les cyber-criminels tentent de surfer sur la vague Windows 7. Visiblement avec succès. BitDefender vient de repérer un un e-mail qui propose aux utilisateurs de Windows de télécharger un « logiciel doit leur permettre de savoir si les ressources de leur système sont suffisantes pour installer le nouveau système d'exploitation » fourni en en pièce jointe du courriel. Cette pièce jointe est en fait une version modifiée du logiciel Windows 7 Upgrade Advisor ? l'outil parfaitement inoffensif et légitime de Microsoft...

    Read the article

  • The Apple iPad &ndash; I&rsquo;m gonna get it!

    - by Sahil Malik
    Ad:: SharePoint 2007 Training in .NET 3.5 technologies (more information). Well, heck, here comes another non-techie blogpost. You know I’m a geek, so I love gadgets! I found it RATHER interesting to see all the negative news on the blogosphere about the iPad. The main bitch points are - No Multi tasking No Flash Just a bigger iPhone. So here’s the deal! My view is, the above 3 are EXACTLY what I had personally hoped for in the Apple iPad. Before the release, I had gone on the record saying - “If the Apple Tablet is able to run full fledged iTunes (so I can get rid of iTunes on my desktop, I don’t like iTunes on Windows), can browse the net, can read PDFs, and will be under $1000, I’ll buy it”. Well, so, the released iPad wasn’t exactly like my dream tablet. The biggest downer IMO was it’s inability to run full iTunes. But, really, in retrospect, I like the newly released iPad. And here is why. No Multi tasking and No Flash, means much better battery life. Frankly, I rarely multi task on my laptop/desktop .. yeah I know my OS does .. but ME – I don’t multi task, and I don’t think you do either!! As I type this blogpost, I have a few windows running behind the scenes, but they are simply waiting for me to get back to them. The only thing truly running and I am making use of, other than this blogost, is media player playing some music – which the iPad can do. Also, I am logged into IM/Email – which again, iPad can do via notifications. It does the limited multitasking I need, without chewing down on batteries. Smart thinking, precisely the reason I love the iPhone. I don’t want a bulky battery consuming machine. Lack of flash? Okay sure, I can’t see Hulu on my iPad. That’s some loss. I can see youtube. Also, per Adobe I can’t see some porn sites, which I don’t want to see on my iPad. But, Flash is heavy. Especially flash video. My dream is to see silverlight run on the iPhone and iPad. No flash = not such a big loss. Speaking of battery life – 10 hours is plenty. I haven’t been away from electricity for that long usually, so I’m okay with charging it up when it runs low. It’s really not such a big deal honestly. Finally, eBook functionality – wow! I went on the record saying, eBook readers are not for me, but seriously, the iPad is perfect for my eBook needs at least. And as far it being just a bigger iPhone? I’ve always wanted a bigger iPhone, precisely for the eBook reading experience. I love my iPhone, I love the apps on it. The only thing that sucks about the iPhone is battery life, but other than that, it is the best gadget I have ever bought! And something that runs on mobile chips, is that thin, and those newly written apps .. mail, calendar .. I am very very excited to get my iPad, which will be the 64gig 3G version. The biggest plus in an iPad ……… no contract on data. I am *hoping*, this means that I can buy a SIM card in Europe, and use the iPad here. That would be killer awesome! But hey, if I had to pick downers in the iPad, they would be - - I wish they had a 128G Version. Now that we have a good video viewing machine, I know I’d chew up space quickly.- Sync over WIFI, seriously Apple.  Both for iPhone and iPad.- 3 month wait!!- Existing iPhone users should get a discount on the iPad data plan. Comment on the article ....

    Read the article

  • Webapps don't open correctly when using Chromium

    - by Alex
    I have just installed Ubuntu 12.10 completely fresh, the old version of Ubuntu was discarded or overwritten (or whatever you call it). I want to use the Ubuntu webapps with Chromium but I've had several problems. }The first problem is that Chromium won't ask me if I want to install a webapp if I go to a supported site (and I don't already have the webapp installed). The second problem is that when I install the webapp by visiting the site in Firefox, and then I try to open it in Chromium, Ubuntu will open a completely new Chromium icon and window in the Launcher, and the icon will be labeled "Untitled"; also there is no search bar in the new window, only the tab at the top. I've tried using several webapps with Firefox set as the default browser and they work as expected: once the webapp icon is clicked a Firefox window is opened on the Firefox launcher icon, and the window has 'new tab' button and search bar.

    Read the article

  • UI Controls Copyright

    - by user3692481
    I'm developing a cross-platform computer software. It will run on Windows and Mac OS X. For user experience reasons, I want it to have the same graphic on both platforms. I really like the Mac OS UI controls and I'd love to see them on the Windows version too. My question is: is it legal to "copy" UI components? I'm not going to copy icons or reproduce an existing Apple software. I would only "copy" some standard UI components such as Buttons, Progressbars, TreeView, ListView etc. You can see them here: http://i.stack.imgur.com/9YzYQ.png http://i.stack.imgur.com/MWR6B.jpg IMHO, they should not be copyrighted for two reasons: They are implicitly used by any Mac OS software There are a lot of Apps (for Windows and even Web-Apps) that are "inspired by" the Mac graphic. Am I right?

    Read the article

  • How should I interpret these DirectX Caps Viewer values?

    - by tobi
    Briefly asking - what do the nodes mean and what the difference is between them in DirectX Caps Viewer? DXGI Devices Direct3D9 Devices DirectDraw Devices The most interesting for me is 1 vs 2. In the Direct3D9 Devices under HAL node I can see that my GeForce 8800GT supports PixelShaderVersion 3.0. However, under DXGI Devices I have DX 10, DX 10.1 and DX 11 having Shader model 4.0 (actually why DX 11? My card is not compatible with DX 11). I am implementing a DX 11 application (including d3d11.h) with shaders compiled in 4.0 version, so I can clearly see that 4.0 is supported. What is the difference between 1 and 2? Could you give me some theory behind the nodes?

    Read the article

  • Hostapd to connect laptop to Android

    - by Kmegamind
    i am trying to set up my laptop as an access point for my Android to use WiFi, so i knew that ubuntu sets the network as Ad-Hoc which is not discoverable by android, So i tried the method explained here -which i found on many other websites- but when i run hostapd.conf this error appears : nl80211: Failed to set interface wlan0 into AP mode nl80211 driver initialization failed. ELOOP: remaining socket: sock=4 eloop_data=0x8e488f8 user_data=0x8e48ea0 handler=0x807c5e0 ELOOP: remaining socket: sock=6 eloop_data=0x8e4aca8 user_data=(nil) handler=0x8086770 this is how my hostapd.conf looks like : interface=wlan0 driver=nl80211 ssid=Any_SSID_name hw_mode=g channel=1 macaddr_acl=0 auth_algs=1 ignore_broadcast_ssid=0 wpa=2 wpa_passphrase=Any_password wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP and this is my wireless card info : description: Wireless interface product: BCM43225 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: wlan0 version: 01 serial: 78:e4:00:73:51:f1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=brcmsmac driverversion=3.2.0-31-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:f0300000-f0303fff

    Read the article

  • What 2D game engines are there available for C++?

    - by dysoco
    I just realized there are not C++ 2D Game Engines that I know of. For example, something like Pygame in Python, or Slick2D in Java. We have the following: SDL - Too low level, not a Game Engine SFML - Handles more things than SDL and it's more modern, but still not a Game Engine. I like it, but I have found it a little bit buggy with the 2.0 version. Irrlitch - It's a Game Engine, but 3D focused. Ogre3D - Same as Irrlitch Allegro - This is a Game Engine, but it's C based, I'd like a modern C++ library. Monocle Engine - This looks like what I need... but sadly there is no Documentation, no community... nothing, all I have is the Github repo. So, do you know any ? I'd like to use C++, not C#, not Java: I'm just more comfortable with C++.

    Read the article

  • Upgrade Ubuntu 11.10 to 12.10

    - by Daniel Minassian
    To whoever can help, I want to update the ubuntu on my laptop to 12.10 from the current version 11.10, when i click on the update manager i get a partial update gui, if i click cancel on that i get the gui for update which has three buttons check, install updates and upgrade. The upgrade button upgrades only to 12.04.1.LTS, when i press check it checks and gives me this error "W:Failed to fetch h t t p://lb.archive.ubuntu.com/ubuntu/dists/precise/main/i18n/Index No Hash entry in Release file /var/lib/apt/lists/partial/lb.archive.ubuntu.com_ubuntu_dists_precise_main_i18n_Index , W:Failed to fetch h t t p://lb.archive.ubuntu.com/ubuntu/dists/precise/multiverse/i18n/Index No Hash entry in Release file /var/lib/apt/lists/partial/lb.archive.ubuntu.com_ubuntu_dists_precise_multiverse_i18n_Index , W:Failed to fetch http://lb.archive.ubuntu.com/ubuntu/dists/precise/restricted/i18n/Index No Hash entry in Release file /var/lib/apt/lists/partial/lb.archive.ubuntu.com_ubuntu_dists_precise_restricted_i18n_Index , W:Failed to fetch http://lb.archive.ubuntu.com/ubuntu/dists/precise/universe/i18n/Index No Hash entry in Release file /var/lib/apt/lists/partial/lb.archive.ubuntu.com_ubuntu_dists_precise_universe_i18n_Index , E:Some index files failed to download. They have been ignored, or old ones used instead." Thank you for your time and help, Daniel Minassian

    Read the article

  • Connection manager detects network but won't connect

    - by Carson Chittom
    I've just installed 12.04 on my home desktop. Because of where it's located, in order not to have my children tripping over cat5 cable, I've got a cheap 802.11n USB device plugged in, which uses a Realtek 8192CU chip. The house wifi is protected with WPA2. Ubuntu's Network Manager detects the network, but connecting to it just times out and asks for the password again. I'm sure I'm using the correct password. No other computers on the house network are having any difficulty. This device previously worked correctly with both Windows 7 and OpenBSD in the same machine. The linux-firmware package is installed (from the disc) at version 1.79, and /lib/firmware/rtlwifi/rtl8192cufw.bin is present. dmesg|grep rtl only shows the "loading firmware" message. I've tried Google, but I apparently can't find the right set of words to plug in, because I haven't found anything related (lots of "doesn't work at all," but nothing matching my circumstances). Any help would be greatly appreciated.

    Read the article

  • packhard bell dot s netbook ubuntu 12.10

    - by Kermit
    sorry im absolutly linux beginner.... i bought a packhard bell netbook dots with Limpus.did not get along with limpus so wanted to install ubuntu. netbook: 2 GB RAM intel Atom N2600, intel graphics Media Accelerator 3600 I over installled ubuntu 12.10 (desktop version) like in the instruction (isofile over USB). Installation went fine. No problems. when starting after installation alot of text is coming.....starting xyz....with alot of okays at the end of line but nothing happends: ends with #Starting CPU interrups balancing daemon, stopping anachronics cron and blinking cursor... was reading in this forum, tried to do some things like #recoverymode# and nomodeset... but did not work or where do i get this graphic drivers from. Packard bell just offers windows drivers.and how do i install them? maybe its a completely diffrent cause for this? Thanks alot

    Read the article

  • How to use multiple instances of gcc?

    - by sud_the_devil
    I have both gcc 4.7.3 and 4.8.1 installed But on running gcc --version I get gcc (Ubuntu/Linaro 4.7.3-1ubuntu1) 4.7.3 Copyright (C) 2012 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. I am an Ubuntu newbie and I don't know much about updating symbolic-links... I searched the Internet, and found out about update-alternatives but was reluctant to use it... Please can someone help me in choosing 4.8 over 4.7 & also tell me is it bad to have 2 versions of same gcc?

    Read the article

  • cowbuilder --create --distribution lucid fails

    - by Daenyth
    I'm trying to create a build environment for Lucid, and calling cowbuilder --create --distribution lucid fails with the messages below: Get:1 http://us-east-1.ec2.archive.ubuntu.com lucid Release.gpg [189B] Hit http://us-east-1.ec2.archive.ubuntu.com lucid Release Hit http://us-east-1.ec2.archive.ubuntu.com lucid/main Packages Fetched 189B in 0s (2376B/s) Reading package lists... I: Obtaining the cached apt archive contents Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Reading package lists... Building dependency tree... apt is already the newest version. Package cowdancer is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package cowdancer has no installation candidate I: unmounting dev/pts filesystem I: unmounting proc filesystem pbuilder create failed forking: rm -rf /opt/cowbuilder

    Read the article

  • No HDMI sound output on Thinkpad X1

    - by nickf
    I'm having problems getting my sound to output via HDMI to my TV. When I go to Sound Settings, the HDMI device does not appear. ~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 I don't know if the video information is helpful, but anyway: ~$ sudo lshw -C video *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:46 memory:d0000000-d03fffff memory:c0000000-cfffffff ioport:5000(size=64) Any suggestions for me?

    Read the article

  • tomcat6 manager

    - by Bary W Pollack
    I've just installed Ubuntu 10.04 LTS Server with LAMP support. Tomcat6 seems to run ok. But, I am unable to get into the manager-webapp... I've updated the tomcat-users.xml file: <?xml version='1.0' encoding='utf-8'?> <tomcat-users> <role rolename="tomcat"/> <role rolename="role1"/> <role rolename="manager"/> <role rolename="admin"/> <user username="tomcat" password="tomcat" roles="tomcat,manager,admin"/> <user username="both" password="tomcat" roles="tomcat,role1"/> <user username="role1" password="tomcat" roles="role1"/> <user username="admin" password="admin" roles="manager,admin"/> </tomcat-users> But, no matter what I try, it keeps rejecting my username/password combo. What might I be missing?

    Read the article

  • GLIBC_2.8 not found

    - by Thomas Nilsson
    As a newbie I seem to have messed up my upgrade leaving my system in a very unstable state. I attempted an upgrade from 8.04LTS which ended in an error about libc and kernel upgrades. I tried to upgrade the kernel but am now unsure if that worked, because when I retried my dist-upgrade there was a lot of errors about pre-dependencies and leaving packages un-configured. Now I have a system that answers almost every command with: /lib/libc.so.6: version `GLIBC_2.8' not found (required by /lib/libselinux.so.1) I probably should try a complete re-installation, but I'm investigating if there is any possibility of getting a working glibc so that I at least can have some commands working to ensure that my backups are recent etc. before doing the clean install. not even 'ls' works without saying "glibc_2.8 not found".

    Read the article

< Previous Page | 536 537 538 539 540 541 542 543 544 545 546 547  | Next Page >