Search Results

Search found 19018 results on 761 pages for 'indicator network'.

Page 541/761 | < Previous Page | 537 538 539 540 541 542 543 544 545 546 547 548  | Next Page >

  • How do I install BCM4312 wireless drivers?

    - by t3ch
    completely new to Ubuntu. How do I add Wireless driver for my laptop? I am running a Dell XPS M1330. Right now its acts as if I dont have a Wi-Fi card. :~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c) 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02) 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02) 00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2) 00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8400M GS] (rev a1) 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) 03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12) 09:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express (rev 02) 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)

    Read the article

  • Presario r3000 hangs on boot to Ubuntu 12.04

    - by Chris
    I have a Compaq Presario r3000 laptop with Ubuntu 12.04 32 bit. 1.2GB RAM, with a nvidia Gforce 420 Go with 32MB RAM. It hangs on bootup about 3 out of 4 times at either the purple screen, or with a cursor in the upper left corner. Booting without a splash screen shows it hanging after attempting to initialize the floppy controller. Unity has never booted to 3D either, only 2D, with the additional drivers always failing to install. I searched all over this board and found similar issues, and tried everything there. Extensive vid driver install and uninstalls. Network issues that I've since resolved. I even found a very similar topic with a fix that didn't work. I'll probably try a clean install today (given how much I've probably messed up), and I would really appreciate any ideas. I'm fairly new to Ubuntu, so if you would like to see any error logs or configs, please walk me through exactly how to get and post them here. Thanks.

    Read the article

  • can't access SAMBA shares on UBUNTU-server from other computers

    - by larand
    Installed UBUNTU-server 12.04 and configured /etc/samba/smb.conf as: #======================= Global Settings ======================= [global] workgroup = HEMMA server string = %h server (Samba, Ubuntu) security = user wins support = yes dns proxy = no log file = /var/log/samba/log.%m max log size = 1000 syslog = 0 panic action = /usr/share/samba/panic-action %d encrypt passwords = no passdb backend = tdbsam obey pam restrictions = yes unix password sync = yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . pam password change = yes map to guest = bad user ############ Misc ############ usershare allow guests = yes #======================= Share Definitions ======================= [printers] comment = All Printers browseable = no path = /var/spool/samba printable = yes guest ok = no read only = yes create mask = 0700 # Windows clients look for this share name as a source of downloadable # printer drivers [print$] comment = Printer Drivers path = /var/lib/samba/printers browseable = yes read only = yes guest ok = no [Bilder original] comment = Original bilder path = /mnt/bilder/org browseable = yes read only = no guest ok = no create mask = 0755 [Bilder publika] comment = Bilder för allmän visning path = /mnt/bilder/public browseable = yes read only = yes guest ok = yes [Musik] comment = Musik path = /mnt/music/public browseable = yes read only = yes guest ok = yes I have a network setup around a 4G router "HUAWEI B593" where some computers are connected by WIFI and others by LAN. The server is connected by LAN. On one computer running windows XP I can see the server but are not allowed to acces them. On another computer on the WIFI-net running win7 I cannot see the server at all but I can ping the server and I can see the smb-protocoll is running when sniffing with wireshark. I don't primarily want to use passwords, computers on the lan and wifi should be able to connect without any login-procedure. I'm sure my config is not sufficient but have hard to understand how I should do. Theres a lot of descriptions on the net but most is old and none have been of any help. I'm also confused by the fact that I can not se the sever on my win7-machine even though it communicates with the samba-server. Would be very happy if anyone could spread some light over this mess.

    Read the article

  • RTL8168B/8111B Lan card is not detected in RHEL5.1..Not finding Lan card driver for this particular

    - by Deepak Narwal
    Hello friends... In My computer Lan card model is Realtek RTL8168B/8111B PCI-E GIGABIT ETHERNET NIC (NDIS 6.20) My system is dual boot windows 7 and redhat 5.1 Now windows 7 automatically detected this lan card but in redhat lan card is not detected.I have tried to through evrywhere like network or through neat-tui but it is not showing lan card.. I tried google also but all of them providing windows software for this lan card . So please anyone can tell me the link so that i can download drivers for this and can use internet there.. Thanks a lot in advance Deepak Narwal

    Read the article

  • Session management error: None of the authentication protocols specified are supported

    - by JBWhitmore
    The title is the first error that has sent me on a mission to fix things. Motivation: I was trying to install the new Enthought Python Distribution -- when the error above first showed up. The install finished -- and looked like there were a few more times it flagged dcopserver problems: Please check that "dcopserver" program is running! Could not read network connection list: ~/home/user/.DCOPserver_host__0 When running ipython from the distribution, it claims that readline (the ability to up arrow in history or tab-complete) is not available for my system. It is though -- if I run the ipython that's sitting in /usr/bin/ipython all readline features work perfectly. So, I tried to fix the install by trying to fix what I thought could be causing the problems. Bad things that are happening that I want to be fixed: When restarting I get the error: Could not update ICEauthority file /home/username/.ICEauthority. ipython readline doesn't work with Enthought's ipython Things I have tried: changed the owner of my ~/.ICEauthority to be me. changed the owner of home directory (and all nested files and folders) to be me double checked that /var/lib/gdm was owned by Gnome (yep) attempted to reinstall DCOP, kbuildsycoca stuff (fail) I've removed nautilus; rebooted; reinstalled; rebooted; removed ubuntu-desktop; rebooted; reinstalled; rebooted. Any suggestions on how to fix the Bad Things that are happening would be greatly appreciated! Computer: Ubuntu 10.04 x86

    Read the article

  • Windows scheduled task not running

    - by Ravi Kumar Singh
    I have several SQL server backups on a server. I have created a batch file which then copies these to network drives. These are mapped to the server, and it works properly. Now, I've created a scheduled task to do this. If I select "run the task when logged in", I can test the task. It works fine. However I cannot test it with the other option "run task if logged in or not". I've read that testing this task is not possible manually. However the task runs when we log off the server automatically.

    Read the article

  • CodePlex Daily Summary for Saturday, October 27, 2012

    CodePlex Daily Summary for Saturday, October 27, 2012Popular ReleasesRazorSourceGenerator: RazorSourceGenerator v1.1 Installer: RazorSourceGenerator v1.1 Installer ?? include ??,???????。Fruit Juice: Fruit Juice v1.1: Changelog (v1.1):Minor design fixes; Added live tiles; Added the new Windows Phone Store Download Badge;ZXMAK2: Version 2.6.7.0: - small performance improvements - fix & improvements for Direct3D renderer (thanks to zebest for testing)Media Companion: Media Companion 3.507b: Once again, it has been some time since our release, and there have been a number changes since then. It is hoped that these changes will address some of the issues users have been experiencing, and of course, work continues! New Features: Added support for adding Home Movies. Option to sort Movies by votes. Added 'selectedBrowser' preference used when opening links in an external browser. Added option to fallback to getting runtime from the movie file if not available on IMDB. Added new Big...MSBuild Extension Pack: October 2012: Release Blog Post The MSBuild Extension Pack October 2012 release provides a collection of over 475 MSBuild tasks. A high level summary of what the tasks currently cover includes the following: System Items: Active Directory, Certificates, COM+, Console, Date and Time, Drives, Environment Variables, Event Logs, Files and Folders, FTP, GAC, Network, Performance Counters, Registry, Services, Sound Code: Assemblies, AsyncExec, CAB Files, Code Signing, DynamicExecute, File Detokenisation, GUI...NAudio: NAudio 1.6: Release notes at http://mark-dot-net.blogspot.co.uk/2012/10/naudio-16-release-notes-10th.htmlPowerShell Community Extensions: 2.1 Production: PowerShell Community Extensions 2.1 Release NotesOct 25, 2012 This version of PSCX supports both Windows PowerShell 2.0 and 3.0. See the ReleaseNotes.txt download above for more information.DbDiff: Database Diff and Database Scripting: 1.3.3.5: - Wrong load options (deskey wrong)Building Windows 8 Apps with C# and XAML: Full Source Chapters 1 - 10 for Windows 8 Fix 001: This is the full source from all chapters of the book, compiled and tested on Windows 8 RTM. Includes a fix for the Netflix example from Chapter 6 that was missing a service reference.PdfReport: PdfReport 1.3: - Removed the limitation of defining non duplicate column names. See DuplicateColumns sample for more info. - Added horizontal stack panel mode. See CharacterMap sample for more info. - Added pdfStamper to onFillAcroForm of PdfTemplate. See QuestionsAcroForm sample for more info. Added 6 new samples (http://pdfreport.codeplex.com/SourceControl/BrowseLatest): - AccountingBalanceColumn - CharacterMap - CustomPriceNumber - DuplicateColumns - QuestionsAcroForm - QuestionsFormUmbraco CMS: Umbraco 4.9.1: Umbraco 4.9.1 is a bugfix release to fix major issues in 4.9.0 BugfixesThe full list of fixes can be found in the issue tracker's filtered results. A summary: Split buttons work again, you can now also scroll easier when the list is too long for the screen Media and Content pickers have information of the full path of the picked item Fixed: Publish status may not be accurate on nodes with large doctypes Fixed: 2 media folders and recycle bins after upgrade to 4.9 The template/code ...AcDown????? - AcDown Downloader Framework: AcDown????? v4.2.2: ??●AcDown??????????、??、??、???????。????,????,?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????,??????、????????????????。 ● AcDown??????????????????,????????????????????????????。 ● AcDown???????C#??,????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???,????????.NET Framework 2.0???(x86),?????"?????????"??? (2)???????????Linux???,????????Mono?? ??2...Rawr: Rawr 5.0.2: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...MCEBuddy 2.x: MCEBuddy 2.3.5: Changelog for 2.3.5 (32bit and 64bit) 1. Fixed a bug causing MCEBuddy to crash during or after installation on Windows XP 2. Bugfix for resource leak with UPnP which would lead to a failure after many days 3. Increased the UPnP discovery re-scan interval from 10 minutes to 30 minutes 4. Added support for specifying TVDB and IMDB id’s in the conversion task page (forcing the internet lookup for metadata)CRM 2011 Visual Ribbon Editor: Visual Ribbon Editor (1.3.1025.5): [NEW] Support for connecting to CRM Online via Office 365 (OSDP) [NEW] Current connection information and loaded ribbon name are displayed in the status bar [IMPROVED] Connect dialog minor improvements and error message descriptions [IMPROVED] Connecting to a CRM server will close currently loaded ribbon upon confirmation (if another ribbon was loaded previously) [FIX] Fixed bug in Open Ribbon dialog which would not allow to refresh entity list more than onceReadable Passphrase Generator: KeePass Plugin 0.8.0: Changes: Interrogative phrases (questions) like why did the statesman burgle amidst lucid sunlamps Support transitive / intransitive verbs (whether a verb needs a subject or not). Change adverbs to be either before or after the verb, at random. Add an "equal" version of each strength, where each possibility is equally likely (for password purists). 3401 words in the default dictionary (~400 more than previous release) Fixed bugs when choosing verb tensesMicrosoft Ajax Minifier: Microsoft Ajax Minifier 4.72: Fix for Issue #18819 - bad optimization of return/assign operator.WPF Application Framework (WAF): WPF Application Framework (WAF) 2.5.0.390: Version 2.5.0.390 (Release Candidate): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Changelog Legend: [B] Breaking change; [O] Marked member as obsolete WAF: Fix recent file list remove issue. WAF: Minor code improvements. BookLibrary: Fix Blend design time support o...Fiskalizacija za developere: FiskalizacijaDev 1.1: Ovo je prva nadogradnja ovog projekta nakon inicijalnog predstavljanja - dodali smo nekoliko feature-a, bilo zato što smo sami primijetili da bi ih bilo dobro dodati, bilo na osnovu vaših sugestija - hvala svima koji su se ukljucili :) Ovo su stvari riješene u v1.1.: 1. Bilo bi dobro da se XML dokument koji se šalje u CIS može snimiti u datoteku (http://fiskalizacija.codeplex.com/workitem/612) 2. Podrška za COM DLL (VB6) (http://fiskalizacija.codeplex.com/workitem/613) 3. Podrška za DOS (unu...Liberty: v3.4.0.0 Release 20th October 2012: Change Log -Added -Halo 4 support (invincibility, ammo editing) -Reach A warning dialog now shows up when you first attempt to swap a weapon -Fixed -A few minor bugsNew Projects25minutes the simpliest, best looking, hassle free Pomodoro Technique® timer: 25 minutes __________________________________________________ it is the simplest, best looking, hassle free timer for all Pomodoro Technique® fans out there.Argument: A website for constructing logical arguments in tree form.Asset manager: More information comming soon!bootster: bootster is a bootstrapper for small/medium sized .net web projects.BugHerd-4-DNN: This DotNetNuke(TM) extension simplifies the integration of BugHerd on your DNN portals.CaptureLinks 2.0: CaptureLink2.0 with SharePoint 2013 SupportDeploy File Demo: Deployfile Demo is the companion piece to Deploy File Generator. It shows how to deploy files that have been imported into a special '.resources' file.DIfmClient: DIfmClient is a WPF (Windows Presentation Foundation) DI.FM streaming radio player, written in C#.FinApps201240: Aplicación Financiera para La CaixaFirstTasteKudo: Just a taste of Kudo feature.Imgx: This is specifically for internal use only.jamestest123: Blah blah blahMezanmiTechFireMyTeam: In short we can use this project for any rating systems.MezanmiTechInTouchReminder: just a way to contact peopleMoniMisiDemo: Para el desarrollo de aplicaciones web en ASP.net del tipo SPI (Single Page Interface).Orchard Redirect404: This project allows you to configure redirects for 404 errors via the Orchard admin interface. P/Opus (.NET Wrapper for libopus): P/Opus is a .NET library written in C# to wrap around the libopus C API/library to provide a more .NET friendly way of encoding and decoding Opus packets.Pengaturan Sambungan (Connection Setting): Aplikasi untuk menyimpan connection string secara terpisah dari program utamaPwdManagement: mgrrezaTest: TestSnowflake Id Generator: Snowflake is a network service for generating unique ID numbers at high scale with some simple guarantees.The Game for Microsoft Dynamics CRM2011: A solution containing a framework for Microsoft Dynamics CRM2011 to enable gamification of the product in order to drive user adoption and business objectives.UCMA 4.0 Async Extension Methods: This collection of extension methods makes it easy for developers to use the async/await pattern for multithreaded development with UCMA 4.0.ValtechGitTfs: Sandbox project to test git-tfs with a TFS serverWarriorG: PokerWeb site bán thú cung: [TRY]XVIB 360: XBOX 360???????????????????????。

    Read the article

  • Extremely slow internet-connection?

    - by Martti Laine
    Hello Few days ago I opened my computer as I always do after school, and got pretty amazed about my 1.27kb/s download-speed. It has continued for few days already. We have a wireless network, which is used by 3 computers. Normally I've gotten 200kb/s (I think we have a 2mb-connection) but now it just suddenly slowed down. My friends have the same service-provider, but no problem. So, is there any kind of program, which would show me all the programs using connection and how much. It must be a program open which just takes all speed off. Any help is appreciated, Martti Laine

    Read the article

  • Access Bind9 DNS in Virtualbox on Host

    - by Philipp Melab
    I've set up a Ubuntu 10.04 Virtual Box with a Bind9 DNS server. The Box has a NAT Network connection for internet access and a host-only adapter for static ip connections from the host (OSX Lion). Thats the only way i managed to get internet and static ip inside the box, guess there is a better one ... The DNS works fine from inside the virtualbox, but not from the host. The http and ftp on the guest system is accessible via both addresses, so connection between host and guest are fine i guess. I tried to add both IP's as name servers. I'm completely new to Bind9 and DNS configuration. Anybody has a hint for me whats wrong? Or how i have to configure the DNS server?

    Read the article

  • How do I configure tinydns (with fefe's IPv6 patch) to listen on IPv6 address?

    - by Christian Hudon
    I'm setting up my network to support IPv6. I have static IPv6 addresses assigned to each interface of my router, and radvd advertising different prefixes on each interface. The next step would be to get my dnscache (from djbdns) working on IPv6. Said dnscache has fefe's IPv6 patch applied, so I assume it should work with IPv6. However, I can't find any documentation online on how to make the patched dnscache listen on IPv6. How do I configure tinydns and dnscache to listen on IPv6 too?

    Read the article

  • With dnsmasq as the DNS server, 'dig' succeeds, but 'nslookup' and 'ping' fail

    - by einpoklum
    I installed dnsmasq on a machine of mine (It's a Kubuntu 12.04 LTS), backed only by /etc/hosts (no connection to the Internet until later). Now, when I'm on the same machine as the dnsmasq - or any other machine on the server, I can dig mymachine and get 192.168.0.1, but if I try to nslookup mymachine, I get: >> connection timed out; no servers could be reached Tried also nslookup mymachine.mynicedomain.org - didn't work either. pinging fails. How can I the DNS lookups to work? Is the problem with the nsswitch entries? The dnsmasq configuration? Additional Information In the server's /etc/hosts: 192.168.0.1 mymachine In the server's nsswitch.conf: hosts: files mdns4_mininal [NOTFOUND=return] dns mdns4 (admittedly, this is a bit weird) In resolv.conf (which is generated by dnsmasq): nameserver 127.0.0.1 search mynicedomain.org In the server's /etc/hosts.allow: domain: ALL In the other machines' /etc/resolv.conf (this is set by the DHCP client): nameserver 192.168.0.1 search mynicedomain.org Finally, here's the ipconfig output from one of the client machines on the network (running Windows 7): Connection-specific DNS Suffix . : mynicedomain.org Description . . . . . . . . . . . : Intel(R) 82579LM Gigabit Network Connection Physical Address. . . . . . . . . : 12-34-56-78-9A-BC DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.0.50(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Sunday, October 20th 2013 16:20:25 Lease Expires . . . . . . . . . . : Sunday, October 20th 2013 18:20:24 Default Gateway . . . . . . . . . : 192.168.0.1 DHCP Server . . . . . . . . . . . : 192.168.0.1 DNS Servers . . . . . . . . . . . : 192.168.0.1 NetBIOS over Tcpip. . . . . . . . : Enabled Notes: May be related to this question.

    Read the article

  • Ubuntu 12.04 VPN default route issue when using the UI

    - by Pieter Pabst
    When setting up a VPN connection using the UI (System settings = Network) the VPN connection is used as the default route after connecting to it. How can I avoid this? That is without assigning manual addresses. I want the connection to use DHCP. It should use the eth* interfaces for my default route, like they are used before making the connection. The VPN route should only be used when connecting to addresses in the ppp0 adapters range. If possible using the UI only, not that I'm not used to editing config files... But the point of using Ubuntu for me was the "it just works" concept (which is true for 99% of the time, keep up the good work). I tried setting the "Method" combobox in the "Configure..." dialogue to "Automatic (VPN) addresses only". That doesn't make a difference. (Another thing I noticed; the UI shows my connection as a "Wireless connection" in the list control on the left. Don't know why... it has the right icon, but that's probably something for the bug tracker)

    Read the article

  • OpenSuSE 11 iscsi target: HFS+ partition not seen by clients

    - by radiopaque
    I have an openSuSE machine as a file server, which has an Areca 1880i inside. It contains several partitions. There is a dm-0 and a dm-1 partition, for example. The partitions are formatted as EFI system partitions, with HFS+ file systems. My opensuse could not read them but the iscsitarget exported them for my Macs. This worked for more than a year. For some reason now, after some network problems which were "solved", my dm-0 partition is not seen anymore! I suspect it is a problem on the iscsi target side, i.e. the OpenSuSE machine. Can anyone suggest what I should look into? Any logs, any settings on the linux machine? None of my macs can access the partition, and they use different client software!! Thanks!

    Read the article

  • How to query a DHCP server to get the local DNS serves

    - by Dan Berlyoung
    I have a ClarkConnect (CentOS based) box running as my home router on a RR connection. I had the DNS servers set up to use Google's DNS server. I want to change them back to the local DNS servers but I can't find an obvious/easy way to get those address short of a)reconfiguring the router's network to DHCP them (would rather not interrupt everyone) or b)calling their T/S (kill me now!). Is there a command line tool/command I can use to query the DHCP server on the external NIC to see what DNS servers it would set me up with w/o munging my existing setup?

    Read the article

  • need for tcp fine-tuning on heavily used proxy server

    - by Vijay Gharge
    Hi all, I am using squid like Internet proxy server on RHEL 4 update 6 & 8 with quite heavy load i.e. 8k established connections during peak hour. Without depending much on application provider's expertise I want to achieve maximum o/p from linux. W.r.t. that I have certain questions as following: How to find out if there is scope for further tcp fine-tuning (without exhausting available resources) as the benchmark values given by vendor looks poor! Is there any parameter value that is available from OS / network stack that will show me the results. If at all there is scope, how shall I identify & configure OS tcp stack parameters i.e. using sysctl or any specific parameter Post tuning how shall I clearly measure performance enhancement / degradation ?

    Read the article

  • Can I grant permissions on files in windows 7 using a security identifier from another machine

    - by Thomas
    I have an external hard drive, and I wish to grant permissions on some files to users from 2 different computers without having to hook it up to the 2 different computers. I know the SID of the user on the other computer, I'd like to know if and how I can grant permissions to files using the SID. I'm running Windows 7 Professional 64 bits, and "The Other" computer Win 7 Home Premium 64 bits, they are not in a domain, but separate computers on a home network (not even same homegroup). Note: Duplicated question with: Is there a way to give NTFS file permissions to users from other Windows installations?

    Read the article

  • How to query a DHCP server to get the local DNS serves

    - by Dan Berlyoung
    I have a ClarkConnect (CentOS based) box running as my home router on a RR connection. I had the DNS servers set up to use Google's DNS server. I want to change them back to the local DNS servers but I can't find an obvious/easy way to get those address short of a)reconfiguring the router's network to DHCP them (would rather not interrupt everyone) or b)calling their T/S (kill me now!). Is there a command line tool/command I can use to query the DHCP server on the external NIC to see what DNS servers it would set me up with w/o munging my existing setup?

    Read the article

  • DIY Homemade Hybrid Rocket Engine [Video]

    - by Jason Fitzpatrick
    Remember the guy with the cool DIY astronaut ice cream build? He’s back with a mini hybrid rocket engine that runs off oxygen and acrylic. I built a small rocket engine for demonstration purposes. The engine is built from a 2″ diameter acrylic rod through which I drilled a 0.5″ hole. The oxygen at 80 psi or less is passed through the hole and then is forced through a convergent-divergent nozzle at the tail end. The nozzle’s throat is about 0.25″ and expands to 0.625″. I lit the engine by inserting a burning cotton swab (with wooden stick) while a small amount of oxygen was flowing. The acrylic catches fire very easily in a pure oxygen environment. The engine can be throttled and shut off completely, which is a major benefit to hybrid engine designs. Solid-fuel rockets cannot be throttled or shut off, which makes them difficult to control. [via Make] HTG Explains: What is the Windows Page File and Should You Disable It? How To Get a Better Wireless Signal and Reduce Wireless Network Interference How To Troubleshoot Internet Connection Problems

    Read the article

  • Group policy issues

    - by Alex Berry
    We are having an issue on one of our clients relatively new sbs installs. The domain consists of a single SBS 2011 server with 4 windows 7 clients and 3 xp clients. Most of the time everything is fine however roughly every 3 days windows 7 clients start timing out when trying to receive computer group policy. This results in hour long delays before getting to the login screen in the morning. This is accompanied by event ID 6006, win login errors stating it took 3599 seconds to process policy. Once they've booted they can log in without issue however gpupdate fails again on computer policy and gpresult comes back with access denied, even when run as domain admin... At this point if we restart the server the network is fine for 3 days. I thought perhaps it might be ipv6 or smb2, but disabling ipv6 on the clients doesn't help and the clients can browse the sysvol folder freely on smb2 anyway. Does anyone have any ideas or routes I can take to further diagnose the issue? Thanks in advance :)

    Read the article

  • MSDCS zone missing

    - by hyp
    I seem to have an issue with our AD/DNS, the structure looks like: but the BPA gives me an error: Issue: The Active Directory integrated DNS zone _msdcs.<domain> was not found. Impact: DNS queries for the Active Directory integrated zone _msdcs.<domain> might fail. Resolution: Restore the Active Directory integrated DNS zone _msdcs.<domain> Now we've got 4 DC's in total: 2 running Server 2008 R2, 2 running Server 2003. The older ones will be retired sometime this year. Actually everything seems to be working ok (if something isn't then we don't know about it), we've got quite a few .NET applications authenticating against AD, no DNS issues from what I can tell and various bits on the network point to all 4 controllers. Furthermore a dcdiag /dnsall comes up with all passes. Is this something I should be worried about?

    Read the article

  • Routing a PPTP client and VMware Server instance running on the same box

    - by servermanfail
    I have a Windows 2003 SBS box. It has 2 physical NIC's: WAN and LAN. The WAN is a public IP. The LAN is a simple 192.168.2.x subnet with Microsoft DHCP Server. Microsoft Routing and Remote Access Service is used to provide NAT to LAN. The box also runs VMware Server with a virtual machine running Windows XP. I want people to be able to VPN into the box, and connect to these virtual machines on the MSRDP port. I can VPN (PPTP) into the 2003 SBS box fine, as well as ping other machines on the LAN. I can ping the VM from a physical workstation on the LAN and vice-versa. I can ping the VPN client from the a physical workstation on the LAN and vice-versa. I can ping the VPN client from the Server console and vice-versa. I can ping the VM client from the Server console and vice-versa. But I cannot ping the VPN client from the VM and vice-versa. I was hoping to set up 2 or 3 Windows XP virtual machines on our only server, so that a couple of people can remote in to work without having to leave a physical machine on in the office. You could this attempted set up a "poor mans terminal server". On the 2003 SBS Server:- C:\Documents and Settings\Administrator>route print IPv4 Route Table =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 50 56 c0 00 08 ...... VMware Virtual Ethernet Adapter for VMnet8 0x3 ...00 50 56 c0 00 01 ...... VMware Virtual Ethernet Adapter for VMnet1 0x10004 ...00 53 45 00 00 00 ...... WAN (PPP/SLIP) Interface 0x10005 ...00 11 43 d4 69 13 ...... Broadcom NetXtreme Gigabit Ethernet 0x10006 ...00 11 43 d4 69 14 ...... Broadcom NetXtreme Gigabit Ethernet #2 =========================================================================== =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 81.123.144.22 81.123.144.21 1 81.123.144.20 255.255.255.252 81.123.144.21 81.123.144.21 1 81.123.144.21 255.255.255.255 127.0.0.1 127.0.0.1 1 81.255.255.255 255.255.255.255 81.123.144.21 81.123.144.21 1 86.135.78.235 255.255.255.255 81.123.144.22 81.123.144.21 1 109.152.62.236 255.255.255.255 81.123.144.22 81.123.144.21 1 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.2.0 255.255.255.0 192.168.2.3 192.168.2.3 1 192.168.2.3 255.255.255.255 127.0.0.1 127.0.0.1 1 192.168.2.26 255.255.255.255 192.168.2.32 192.168.2.32 1 192.168.2.28 255.255.255.255 192.168.2.32 192.168.2.32 1 192.168.2.32 255.255.255.255 127.0.0.1 127.0.0.1 50 192.168.2.50 255.255.255.255 127.0.0.1 127.0.0.1 1 192.168.2.255 255.255.255.255 192.168.2.3 192.168.2.3 1 192.168.10.0 255.255.255.0 192.168.10.1 192.168.10.1 20 192.168.10.1 255.255.255.255 127.0.0.1 127.0.0.1 20 192.168.10.255 255.255.255.255 192.168.10.1 192.168.10.1 20 192.168.96.0 255.255.255.0 192.168.96.1 192.168.96.1 20 192.168.96.1 255.255.255.255 127.0.0.1 127.0.0.1 20 192.168.96.255 255.255.255.255 192.168.96.1 192.168.96.1 20 224.0.0.0 240.0.0.0 81.123.144.21 81.123.144.21 1 224.0.0.0 240.0.0.0 192.168.2.3 192.168.2.3 1 224.0.0.0 240.0.0.0 192.168.10.1 192.168.10.1 20 224.0.0.0 240.0.0.0 192.168.96.1 192.168.96.1 20 255.255.255.255 255.255.255.255 81.123.144.21 81.123.144.21 1 255.255.255.255 255.255.255.255 192.168.2.3 192.168.2.3 1 255.255.255.255 255.255.255.255 192.168.10.1 192.168.10.1 1 255.255.255.255 255.255.255.255 192.168.96.1 192.168.96.1 1 Default Gateway: 81.123.144.22 =========================================================================== Persistent Routes: None C:\Documents and Settings\Administrator>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : 2003server Primary Dns Suffix . . . . . . . : mycompany.local Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : Yes WINS Proxy Enabled. . . . . . . . : Yes DNS Suffix Search List. . . . . . : mycompany.local gateway.2wire.net Ethernet adapter VMware Network Adapter VMnet8: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet 8 Physical Address. . . . . . . . . : 00-50-56-C0-00-08 DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.10.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter VMware Network Adapter VMnet1: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet 1 Physical Address. . . . . . . . . : 00-50-56-C0-00-01 DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.96.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : PPP adapter RAS Server (Dial In) Interface: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface Physical Address. . . . . . . . . : 00-53-45-00-00-00 DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.2.32 Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : NetBIOS over Tcpip. . . . . . . . : Disabled Ethernet adapter LAN: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet Physical Address. . . . . . . . . : 00-11-43-D4-69-13 DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.2.50 Subnet Mask . . . . . . . . . . . : 255.255.255.0 IP Address. . . . . . . . . . . . : 192.168.2.3 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DNS Servers . . . . . . . . . . . : 192.168.2.3 Primary WINS Server . . . . . . . : 192.168.2.3 Ethernet adapter WAN: Connection-specific DNS Suffix . : gateway.2wire.net Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet #2 Physical Address. . . . . . . . . : 00-11-43-D4-69-14 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 81.123.144.21 Subnet Mask . . . . . . . . . . . : 255.255.255.252 Default Gateway . . . . . . . . . : 81.123.144.22 DHCP Server . . . . . . . . . . . : 10.0.0.1 DNS Servers . . . . . . . . . . . : 10.0.0.1 Primary WINS Server . . . . . . . : 192.168.2.3 NetBIOS over Tcpip. . . . . . . . : Disabled Lease Obtained. . . . . . . . . . : 25 February 2011 22:56:59 Lease Expires . . . . . . . . . . : 25 February 2011 23:06:59 C:\Documents and Settings\Administrator>ping 192.168.2.11 Pinging 192.168.2.11 with 32 bytes of data: Reply from 192.168.2.11: bytes=32 time<1ms TTL=128 Reply from 192.168.2.11: bytes=32 time<1ms TTL=128 Reply from 192.168.2.11: bytes=32 time<1ms TTL=128 Reply from 192.168.2.11: bytes=32 time<1ms TTL=128

    Read the article

  • Creating svn repo programmatically from a webpage and sudo

    - by Adriano Varoli Piazza
    We want to automate the creation of the svn repos and trac environments for new projects. Basically, this would mean creating a web script that got some info (like env and repo name, etc) from the user and then executed sudo -u svn svnadmin create /var/svn/<projectname> trac-admin /var/trac/sites/<projectname> initenv [... All extra params...] For the second command, this is simple, as it already runs as the www-data user, so I wouldn't have to use sudo. But for the first command, I'd have to use sudo and add www-data to the sudoers file. I was wondering if this is a good idea, and how to do it in that case. Reading the manpage has left me with more doubts than certainties about this. This webserver would only be accessible from our internal network, by the way. The OS is Ubuntu Server 10.04.

    Read the article

  • Dual WAN port on a WRT54GL

    - by pufferfish
    Is it possible to reconfigure one of the LAN ports on a WRT54GL (running Tomato firmware) to act as a second WAN port? I have the following networks: PPOE connection to ADSL modem (works fine on the normal WAN port) WiFi neighbourhood network (in 178.X.X.X range), via a Mikrotik routerboard which I'd like to put on the WAN side of the router. I'd then like to set up routing so than some traffic (172.X.X.X) is routed to the Mikrotik and the rest to the ADSL modem. p.s. for practical reasons, I can't use the Mikrotik as the firewall/router. Edit: It seems this can be done by editing iptables, can someone tell me exactly how?

    Read the article

  • Creating a secure multicast tunnel with socat

    - by ams
    How we can create secure multicast tunnels ith socat? Assume that we have a list of IP address, CIDR network addresses that we want to create secure tunnel to them. I found this: socat STDIO UDP4-DATAGRAM:224.1.0.1:6666,range=192.168.10.0/24 but I want a secure tunnel and different adds with net addrs I want to create script that give the IPs and net addresses and creates a secure tunnel ./myscript IP1 NetAdd1 IP2 NetAdd2 .... How can I send these parameters to socat? Does socat multicast have any limits?

    Read the article

  • Install VirtualBox Guest Additions "Feisty Fawn"

    - by codebone
    I am trying to install the virtualbox guest additions into a feisty fawn (7.04) VM. The problem I am running into is that when I Click install guest additions, or place the iso in the drive manually, the disk never shows up in the machine. I even manually mounted and went to the mounted directory and it was empty. When using the file browser, doubling clicking on the cdrom yields Unable to mount the selected volume. mount: special device /dev/hdc does not exist. Secondly, I tried installing via repository... but according to the system, I have no internet connection. But, I can browse the web using firefox just fine (in the guest). Here is my /etc/network/interfaces file... code auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp I also tryed setting a static ip... auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.1.253 netmask 255.255.255.0 gateway 192.168.1.1 The reason I am trying to get this particular installation running is because it is part of a book, "Hacking: The Art of Exploitation" (Jon Erickson), and is fully loaded wilh tools and such to go along exactly with the book. I appreciate any effort into finding a solution for this! Thanks

    Read the article

< Previous Page | 537 538 539 540 541 542 543 544 545 546 547 548  | Next Page >