Search Results

Search found 27891 results on 1116 pages for 'boot options menu'.

Page 55/1116 | < Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >

  • BIOS unable to boot CD or Hard Drive

    - by Gabriel
    Motherboard Intel DQ35MP. HDD Caviar Green 1TB. I'm having problems with my BIOS and/or hard drive/disc drive. Came back from a trip, booted my computer, and realized that the BIOS wasn't booting anymore, just a black screen with no beep sounds. Only fans and lights on. Then I thought it might be caused by the video card, I removed it, and still no BIOS screen. Then I removed the hard drive and voila BIOS screen is back again. If the hard drive is defective then I can check that with a Rescue Disk. I inserted the CD on the Disc Tray but the computer did not respond to it, the screen freezes in black with an "E7" string at the bottom right corner just after the BIOS screen, this happens with or without discs. BIOS settings are set to default, and CD reading is on top of the boot device list. EDIT I removed the BIOS battery, rebooted the CPU, the BIOS screen showed up, and then it freezed in E7. Placed the BIOS batttery, rebooted and same thing, we are stuck with the E7 string. I uploaded a video to illustrate the problem http://www.youtube.com/watch?v=13jPdBcIrBU

    Read the article

  • Horizontal menu in WP default theme

    - by Martin
    I'm setting up a simple webpage using Wordpress. You can watch it at www.unistore.se. My question is: How can I include a horizontal menu just below the header? I would like to be able to create new links in the menu with the "New page"-function in the wordpress admin. Thanks!

    Read the article

  • Win2008: Boot from mirrored dynamic disk fails!

    - by Daniel Marschall
    Hello. I am using Windows Server 2008 R2 Datacenter and I got two 1.5TB S-ATA2 hard disks installed and I want to make a soft raid. (I do know the disadvantages of softraid vs. hardraid) I have following partitions on Disk 0: (1) Microsoft Reserved 100 MB (dynamic), created during setup (2) System Partition 100 GB (dynamic) (3) Data partition, 1.2TB (dynamic) I already mirrored these contents to Disk 1. Its contents are: (1) System partition mirror, 100 GB (dynamic) (2) Data partition, 1.2 TB mirror (dynamic) (3) Unusued 100 MB (dynamic) -- is from "MSR" of Disk 0, created during setup. Since data and system partition are mirrored, I expect that my system works if disk 0 would fail. But it doesn't. If I force booting on disk 0: Works (I get the 2 bootloader screen) If I force booting on disk 1 (F8 for BBS), nothing happens. I got a blank black screen with the blinking caret. I already made disk1/partition1 active with diskpart, but it still does not boot from this drive. Please help. Both partitions are in "MBR" partition style. They look equal, except the missing "MSR" partition at the partition beginning (which seems to be not relevant to booting). Regards Daniel Marschall

    Read the article

  • Windows 7 Won't Boot

    - by Vie
    I recently built a new computer, my fifth one. ASUS Maximus III Formula LGA 1156 Intel P55 ATX Motherboard EVGA 01G-P3-1452-TR GeForce GTS 450 Superclocked 1GB 128-bit GDDR5 PCI Express 2.0 x16 HDCP Video Card COOLMAX RM-1000B 1000W ATX psu Intel Core i7-875K lynnfield 2.93GHz LGA 1156 95w Quad-Core unlocked processor G.SKILL Ripjaws Series 16 (4x4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) memory WD VelociRaptor WD3000GLFS 300gb 10000 RPM SATA 3.0Gb/s Hard Drive Sony Optiarc CD/DVD Burner model AD-7261S-0B LightScribe Windows 7 Home Premium 64-bit It gets hung up on the starting windows screen. When I went to install the OS it did the same thing wouldn't go past the windows logo, so I put the new HDD into my old computer and installed windows 7 thinking it was just an installer error. Put the fully installed HDD back into my new machine and it still gets stuck on the starting windows screen. I've tried most everything I've looked up. Disabled USB, Disabled Turbo Boost, Disabled everything that wasn't essential(just about every configuration I can think of), took it apart and put it back together, took all the ram out save one 4g stick(wouldn't even boot when I did this), did a memory scan which came back successful, I don't know what could be wrong. Only thing I can think of is a compatibility issue somewhere, but I've ran over it again and again and I don't know where there would be an issue like that. Need Backup! .<

    Read the article

  • asp.net menu control css for child items

    - by Andres
    I have an asp.net menu control which the child items(submenu) width is tied to its parent's width, I was wondering is there a work around? because some of the titles for the submenu are longer than the title of the parent so it looks all smooshed together and just horrible on the eyes. Any help is much appreciated. :) .net control: <asp:Menu ID="navigation" runat="server" Orientation="Horizontal" CssClass="topmenu" MaximumDynamicDisplayLevels="20" IncludeStyleBlock="false"> <DynamicSelectedStyle /> <DynamicMenuItemStyle /> <DynamicHoverStyle /> <DynamicMenuStyle /> <StaticMenuItemStyle /> <StaticSelectedStyle /> <StaticHoverStyle /> </asp:Menu> html rendered: <div class="topmenu" id="navigation"> <ul class="level1"> <li><a class="popout level1" href="dashboard.aspx?option=1">Seguridad</a> <ul class="level2"> <li><a class="level2" href="security/users.aspx?option=15">Usuarios</a></li> <li><a class="level2" href="security/profiles.aspx?option=16">Perfiles</a></li> <li><a class="level2" href="security/options.aspx?option=17">Opciones</a></li> <li><a class="level2" href="security/actions.aspx?option=18">Acciones</a></li> </ul> </li> </ul> </div> css: div.topmenu{} div.topmenu ul { list-style:none; padding:5px 0; margin:0; background: #0b2e56; } div.topmenu ul li { float:left; padding:10px; color: #fff; height:16px; z-index:9999; margin:0; } div.topmenu ul li a, div.menu ul li a:visited{ color: #fff; } div.topmenu ul li a:hover{ color:#fff; } div.topmenu ul li a:active{color:#fff; } thats what I have and the styling works i just need help in getting submenus to expand if they are bigger than main title. Thanks in advance!

    Read the article

  • menu with: hover, click, class change and ajax

    - by abdullah kahraman
    Hello! I have made a menu that adds class "active" on hover to each li, and removes the class when hovered out, except on li s that has a class "active" already. So far, this is done. However I have another .click() on every li that loads a content to somewhere with ajax. The problem starts here, when I click, I want to add class "active" to clicked element and remove class from all of them. I add the class, but the li that had class "active" before the click doesn't get "active" when hovered, I think the "active" class is not removed from it? Can anyone help? <div id="menu"> <ul> <li><a href="index.php" id="homeLink">home</a></li> <li><a href="#">news</a></li> <li><a id="test" href="#" class="active">blog</a></li> <li><a href="#">gallery</a></li> <li><a href="#">about</a></li> <li><a href="contact.php" id="contactLink">contact</a></li> <li id="ajaxP" style="display:none"><img alt="loading" style="border:none;" src="images/ajax-loader.gif"/></li> </ul> </div> Here is the jquery: $("#menu").find("a").not(".active").each(function(){ $(this).hover(function(){ alert($(this)); $(this).addClass("active"); },function(){ $(this).not(".clicking").removeClass("active"); }); }); $("#homeLink").click(function(){ var myThis=$(this); $("#ajaxP").fadeIn("slow"); $("#normalcontent").hide("slow").load("index.php #normalcontent").slideDown("slow"); $("#primarycontainer").hide("slow").load("index.php #primarycontainer").slideDown("slow"); $("#ajaxP").fadeOut("normal"); $("#menu").find("a").each(function(){ $(this).unbind('mouseover').unbind("mouseout"); $(this).removeClass("active clicking"); }); myThis.addClass("active clicking"); return false; });

    Read the article

  • Horizontal(tabbed) menu with ability to wrap overflowed items into collapsible dropdown

    - by wik
    It's about html/css/javascript menu ;) I am looking for unified solution to hide extra tabs of horizontal/tabbed menu when it overflows it's container. The initial idea plagiarized from firefox tabs workflow, i.e. when you have too much tabs it will wrap extra ones into collapsible dropdown button "List all tabs". I am thinking to play with overflow:auto in conjunction with javascript, but is there anything like this already implemented or maybe some better idea? Thanks.

    Read the article

  • Computer Won't Boot Properly, unless in safe mode?

    - by Mr_CryptoPrime
    I bought a computer today and booted it up, but when I did I only got a blank screen. I checked to make sure it wasn't the monitor by connecting it to my old computer...it worked. I then tried connecting my monitor to both DVI ports and found that the bottom one did work. However, now it just boots up and says "loading windows" and then when the login screen is suppose to come up the screen just goes blank and monitor says "no input, check cord" (or something like that). I tried reinstalling windows and then I was able to log on normally. I used the CD's and reinstalled all the drivers, then rebooted...now I am stuck right back where I started. I tried taking out the RAM and inserting into different slots, that didn't fix anything. I was able to boot up into windows using safe-mode. I suspected that my ATI Radeon 6950 was the issue and downloaded the drivers, but I can't install them on safe-mode. Someone said to install C++ distr. and I tried doing that to fix driver installation problem of "failed to load detection driver" but it wouldn't let me do that either. Please someone help me, I don't want to have to deal with the evil redtape of sending it back to get a replacement! My computer: -Content--text-_-"http://www.newegg.com/Product/Product.aspx?Item=N82E16883229236&nm_mc=TEMC-RMA-Approvel&cm_mmc=TEMC-RMA-Approvel--Content--text-_- Driver detection problem: http://www.hardwareheaven.com/hardwareheaven-tools-discussion/174912-failed-load-detection-driver-installation-error.html Driver download page: http://sites.amd.com/us/game/downloads/Pages/radeon_win7-64.aspx#1 I am using windows 7. Thanks again.

    Read the article

  • IE8 Accordion menu is throwing out some weird bugs

    - by Qwibble
    I have an accordion side menu in my latest project that works in all modern browsers properly, apart from ie8. In Ie8, using the menu and clicking results in random padding and margins to be added and sometimes disappear for no apparent reason. I can't find any bit of jquery code that would potentially cause this to happen which is a pain. Even more confusing is the fact that this doesn't happen in Ie7 =S Can anyone here replicate this bug, and see what the problem is? Project Demo to view in ie8

    Read the article

  • How to delay hiding of a menu with Jquery Dropdown Menu?

    - by Keith Donegan
    I have a dropdown menu that works fine, but I would like it so, that if I hover off the menu, it doesn't immediately hide again. So basically I would like a one second delay. I have read about setTimeout, but not sure if it is what I need? $('#mainnav a').bind('mouseover', function() { $(this).parents('li').children('ul').show(); }); $('#mainnav a').bind('mouseout', function() { $(this).parents('li').children('ul').hide(); });

    Read the article

  • Dynamic menu items in WPF

    - by mattdekrey
    Is there a way to create a section on a menu for a list of menu items to be populated by something like an ObservableCollection? I'd like to replicate the Window functionality in Visual Studio, where the open document tabs are listed in a numbered list, limited to the first 10.

    Read the article

  • Computer does not boot, often

    - by tam
    I've ran into a issue with my computer that it does no longer reach POST, but simply powers on for a fraction of a second and powers off. But this is not always, some times it boots just normally and it works as it should, no issues with not enough power or anything. But as soon as I turn it of, I can not turn it back on, but then again at some random point it just powers up again, and resumes normal operation. If I disconnect the 8pin ATX connector from the motherboard, it powers up, fans and disks spinning normally until I power it off again. So this problem only happens when ATX is connected, which seems odd, I normally always saw this kind of an error if ATX was not connected, but here it's the exact opposite. It also does not emit any sound on the buzzer, except the normal beep, when it powers up normally. I have already tried: Remove graphics card Remove one and/or all RAM sticks Disconnect everything non-essential, even hard drives Clear CMOS I have not yet tried to remove all components and tried to boot everything outside of the case, because I did not have the time to disassemble and bleed the water loop. However, I can confirm that nothing is stuck underneath the motherboard, not is any of those brass raisers touching the board where it should not. Specs: Gigabyte GA-970A-UD3 AMD FX6300 ATI HD7850 I think this should be enough for this issue.

    Read the article

  • Design Pattern for "Context Sensitive" Right Click Menu

    - by MadSeb
    Hi, What is a design pattern I can use for generating "context-sensitive" right click menus ? I have in mind a "Windows Explorer"-like application where a user can right click on a folder and get a list of menu items but right click on a drive and get a totally different list. What design pattern should I use ? Would the factory design pattern be appropiate for handling such a menu ? Regards, Seb

    Read the article

  • Dual Boot Installing Ubuntu 12.04 with Windows 7 (64) on a non UEFI system fails

    - by Randnum
    I cannot seem to install the correct boot loader for a non-UEFI firmware system. I'm trying to install Ubuntu 12.04 and Windows 7 (64) which are technically compatible with GPT but for windows only if the firmware is UEFI enabled. My system uses the old BIOS system and does not support UEFI. Therefore, whenever I finish my Ubuntu install and try to install Windows I get a "cannot install to GPT partition type" error. Even if I use Gparted to format a special NTFS file format for windows it can't handle the GPT partition style because it doesn't have UEFI. But my ubuntu install always forces GPT during installation and never asks if I want to install the old BIOS style MBR instead. How do I resolve this? Both OS's will install fine on their own the problem is when I try to install the second OS it doesn't recognize any of the other's partitions and tries to rewrite it's own on top of the other. I've tried both OS's first and always run into the same problem. Since there is no way to make Windows recognize GPT without upgrading my Motherboard how do I tell Ubuntu to use the old BIOS MBR on install? Do I have to download a special Ubuntu with a specific grub version? or should I manaually configure my partition somehow to force it not to use GPT? Thank you,

    Read the article

  • Computer not finding hard drives on boot -sometimes-

    - by todd.pund
    Computer specs: Mobo: Gigabyte ultradurable 3 - GA-970A-UD3 Processor: First gen I7 3.2GHZ Ram: 8GB Kingston DDR3 1066 Video Card: EVGA NVidia GTX 460 1GB Hard Drive: 500MB 7200rpm x2 (can't remember brand, sorry I'm at work.) Last week my developer preview for Windows 8 ran out so I put my copy of windows 7 back on the computer. The computer at that point started suffering from frequent freezing and crashing. When I rebooted the computer sometimes it wouldn't find the system HD at all. When I looked at the post screen it seemed to show that it wasn't finding either of the HDs. Then yesterday when turning on the computer I just got GRUB as a message (not a GRUB prompt, just GRUB) I haven't had a dual boot of Linux for at least a year. I loaded windows 7 recovery console from the disk and ran: bootrec /fixboot bootrec /fixmbr Which did not help. At that point I just installed Ubuntu 13.04 over the windows 7 install and still received the GRUB post. I went into the BIOS and switched the Hard Drive priorities and then it loaded into Ubuntu fine. For several days everything was just hunky dory until I installed the Ubuntu version of Steam, install Portal and tried to run it. At that point the computer froze and after hard rebooting couldn't find the hard disks again. Then after restarting the system it loaded up fine again and no issues since. (I have not tried to launch portal again). My next thought is to remove the system hard drive and try to use the secondary as the master to see if the primary HD is bad. I'm sorry if this has been confusing, I'll answer any questions I can. Any thoughts?

    Read the article

  • Computer Won't Boot Properly, unless in safe mode?

    - by Mr_CryptoPrime
    I bought a computer today and booted it up, but when I did I only got a blank screen. I checked to make sure it wasn't the monitor by connecting it to my old computer...it worked. I then tried connecting my monitor to both DVI ports and found that the bottom one did work. However, now it just boots up and says "loading windows" and then when the login screen is suppose to come up the screen just goes blank and monitor says "no input, check cord" (or something like that). I tried reinstalling windows and then I was able to log on normally. I used the CD's and reinstalled all the drivers, then rebooted...now I am stuck right back where I started. I tried taking out the RAM and inserting into different slots, that didn't fix anything. I was able to boot up into windows using safe-mode. I suspected that my ATI Radeon 6950 was the issue and downloaded the drivers, but I can't install them on safe-mode. Someone said to install C++ distr. and I tried doing that to fix driver installation problem of "failed to load detection driver" but it wouldn't let me do that either. Please someone help me, I don't want to have to deal with the evil redtape of sending it back to get a replacement! My computer: -Content--text-_-"http://www.newegg.com/Product/Product.aspx?Item=N82E16883229236&nm_mc=TEMC-RMA-Approvel&cm_mmc=TEMC-RMA-Approvel--Content--text-_- Driver detection problem: http://www.hardwareheaven.com/hardwareheaven-tools-discussion/174912-failed-load-detection-driver-installation-error.html Driver download page: http://sites.amd.com/us/game/downloads/Pages/radeon_win7-64.aspx#1 I am using windows 7. Thanks again.

    Read the article

  • Are there any modern GUI toolkits which implement a heirarchical menu buffer zone?

    - by scomar
    In Bruce Tognazzini's quiz on Fitt's Law, the question discussing the bottleneck in the hierarchical menu (as used in almost every modern desktop UI), talks about his design for the original Mac: The bottleneck is the passage between the first-level menu and the second-level menu. Users first slide the mouse pointer down to the category menu item. Then, they must carefully slide the mouse directly across (horizontally) in order to move the pointer into the secondary menu. The engineer who originally designed hierarchicals apparently had his forearm mounted on a track so that he could move it perfectly in a horizontal direction without any vertical component. Most of us, however, have our forarms mounted on a pivot we like to call our elbow. That means that moving our hand describes an arc, rather than a straight line. Demanding that pivoted people move a mouse pointer along in a straight line horizontally is just wrong. We are naturally going to slip downward even as we try to slide sideways. When we are not allowed to slip downward, the menu we're after is going to slam shut just before we get there. The Windows folks tried to overcome the pivot problem with a hack: If they see the user move down into range of the next item on the primary menu, they don't instantly close the second-level menu. Instead, they leave it open for around a half second, so, if users are really quick, they can be inaccurate but still get into the second-level menu before it slams shut. Unfortunately, people's reactions to heightened chance of error is to slow down, rather than speed up, a well-established phenomenon. Therefore, few users will ever figure out that moving faster could solve their problem. Microsoft's solution is exactly wrong. When I specified the Mac hierarchical menu algorthm in the mid-'80s, I called for a buffer zone shaped like a <, so that users could make an increasingly-greater error as they neared the hierarchical without fear of jumping to an unwanted menu. As long as the user's pointer was moving a few pixels over for every one down, on average, the menu stayed open, no matter how slow they moved. (Cancelling was still really easy; just deliberately move up or down.) This just blew me away! Such a simple idea which would result in a huge improvement in usability. I'm sure I'm not the only one who regularly has the next level of a menu slam shut because I don't move the mouse pointer in a perfectly horizontal line. So my question is: Are there any modern UI toolkits which implement this brilliant idea of a < shaped buffer zone in hierarchical menus? And if not, why not?!

    Read the article

  • Install Debian stable linux ISO from USB to dual boot Windows

    - by tgkprog
    I want debian as dual boot with my windows vista, Free'd up 50GB in my d drive. Plan to use 40 for debian install, 6GB for swap space Have a 16GB USB drive Downloaded http://unetbootin.sourceforge.net/ Downloaded DVD files of stable debian-7.0.0-amd64-DVD-1.iso ( debian-7.0.0-amd64-DVD-2.iso and 3) After I choose HD install, unetbootin says place the ISO in the same place. but I have 3. do i need to merge them? if so any freeware to do that? can i do it with 7zip? when I extract with 7 zip there are classes between the 3 ISO files. Just over write? Options to merge (format etc for 7zip) ? Or I must use I tried to keep the 3 files with the other unetbootin files but get an error msg Files I have on my USB 06/30/2013 11:44 PM 2,835,648 ubnkern 06/05/2013 12:14 AM 3,998,007,296 debian-7.0.0-amd64-DVD-1.iso 06/04/2013 03:30 PM 4,696,872,960 debian-7.0.0-amd64-DVD-2.iso 06/05/2013 01:25 AM 4,698,955,776 debian-7.0.0-amd64-DVD-3.iso 06/30/2013 11:45 PM 6,530,278 ubninit 06/30/2013 11:46 PM 155 syslinux.cfg 06/30/2013 11:46 PM 60,928 menu.c32 also i can only copy above files if i format my USB as NTFS On FAT32 says too large to copy .iso How do I get around that? My internet needs a login so cannot do net install

    Read the article

  • Wordpress menu issue on IE!

    - by Joann
    So I am building a site for a client. The problem is the menu I made doesn't work on IE. Here's the site: http://robertnogueira.com You'll see that the topmost menu isn't where it is supposed to be.. I know this could be a very simple problem to fix. But since I am new to web development I really can't find a way to fix it... Please help me figure it out.. Thanks!

    Read the article

  • Correct way to create a menu with shortcuts in WPF

    - by mattdekrey
    What is the correct/best way to create a menu with hotkey shortcuts? I simply want a File menu like Visual Studio's that has New, Open, Save, Save All, Exit, and a few other standard shortcuts. It seems that InputGestureText displays the appropriate text, but since it's called "Text" and doesn't seem to trigger events, I'm going to assume that isn't the right way to do it. The Command architecture also seems fairly bulky, so I don't want to head down that path if there is a better way.

    Read the article

  • What is the proper way to Windows 7/Ubuntu 10.10 Dual-Triple Boot Partitioning for Laptop OEM?

    - by Denja
    Hi Linux Community, I find my self struggling with the slowness of windows OS once again. It's Time to change with the Ubuntu 10.10 64bit for I like to use a faster Operating System. My Hard Disk laptop has a RECOVERY and HP_TOOLS partition they are both Primary. I Have the System Recovery DVD for Windows 64bit should anything bad happen. Here's the layout I used with windows before: * (C:) Windows 7 system partition NTFS - 284,89GB (Primary,ad Boot,Pagefile,Dump) * HP_TOOLS system partition FAT32 - 99MB (Primary) * (D:) RECOVERY partition NTFS - 12,90GB (Primary) * SYSTEM partition NTFS 199MB (Primary) Here's the layout I wanted to make: * (C:) Windows 7 system partition NTFS - 60GB (Primary) (sda1) * (D:) Windows DATA partition (user files) NTFS - 120GB(Primary)(sda2);wanna share with Linux * Linux root Ext4 - 10GB (Extended)(sda3) (Ubuntu 10.10 64bit) * Linux home Ext3 - 90GB (Extended)(sda4) (Ubuntu 10.10 64bit) * Linux swap swap- RAM size, 3GB (sda5) * Linux root Ext3- 18GB (Extended) (sda6) (OpenSuse or Puppy or kubuntu) Here is my New Ubuntu 10.10 64bit layout in use now: * SYSTEM partition NTFS 199MB (Primary) (sda1) * (C:) Windows 7 system partition NTFS - 90GB (Primary) (sda2) * (D:) Windows 7 RECOVERY partition NTFS - 12,90GB (Primary) (sda3) * Linux system partition EXTENDED - 195,1GB (Logical) * Linux root Ext4- 10GB (Extended) (sda4) * Linux swap swap- RAMx2 size, 6,1GB (sda5) * Linux home Ext3- 179GB (Extended) (sda6) When I installed Ubuntu,I didn't know if I could wipe all previous partitions,because of the RECOVERY partition. So I just made the space for my extended partition with GParted by deleting the HP_TOOLS (Fat32). By doing this I managed somehow to install Ubuntu 64 with Success. And I also made the partitions for the swap or a third Linux OS as Jordan suggested. But I couldn't actually make the partitions for the shared NTFS.(no option!) Question 1: What is the proper way to Windows 7/Ubuntu 10.10 Dual-Triple Boot Partitioning for Laptop OEM?? Thank you in advance for your advises and suggestions and Happy New Year to All!!

    Read the article

  • How to start a s3ql script automatically on boot?

    - by ks78
    I've been experimenting with s3ql on Ubuntu 10.04, using it to mount Amazon S3 buckets. However, I'd really like it to mount them automatically. Does anyone know how to do that? I've been working on a script, which works when its run from from the commandline, but for some reason I can't get it to run automatically on boot. Does anyone have any ideas? Here's my script: #! /bin/sh # /etc/init.d/s3ql # ### BEGIN INIT INFO # Provides: s3ql # Required-Start: $remote_fs $syslog # Required-Stop: $remote_fs $syslog # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Start daemon at boot time # Description: Enable service provided by daemon. ### END INIT INFO case "$1" in start) # Redirect stdout and stderr into the system log DIR=$(mktemp -d) mkfifo "$DIR/LOG_FIFO" logger -t s3ql -p local0.info < "$DIR/LOG_FIFO" & exec > "$DIR/LOG_FIFO" exec 2>&1 rm -rf "$DIR" modprobe fuse fsck.s3ql --batch s3://mybucket exec mount.s3ql --allow-other s3://mybucket /mnt/s3fs ;; stop) umount.s3ql /mnt/s3fs ;; *) echo "Usage: /etc/init.d/s3ql{start|stop}" exit 1 ;; esac exit 0

    Read the article

  • What is the right way to Windows 7/Ubuntu 10.10 Dual-Triple Boot Partitioning for Laptop OEM?

    - by Denja
    Hi Linux Community, I find my self struggling with the ever slow and buggy windoze OS once again. It's Time to change with the Ubuntu 10.10 64bit as a really faster Operating System. My Hard Disk laptop as a RECOVERY and HP_TOOLS partition they are both Primary. I Have the System Recovery DVD for Windows 64bit should anything happen. Here's the layout I used with windows before: * (C:) Windows 7 system partition NTFS - 284,89GB (Primary,Boot,Pagefile,Dump) * HP_TOOLS system partition FAT32 - 99MB (Primary) * (D:) RECOVERY partition NTFS - 12,90GB (Primary) * SYSTEM partition NTFS 199MB (Primary) Here's the layout I want to make based on your answers * (C:) Windows 7 system partition NTFS - 60GB (Primary) (sda1) * (D:) Windows DATA partition (user files) NTFS - 120GB(Primary)(sda2);wanna share with Linux * Linux root Ext4 - 100GB (Primary)(sda3) (Ubuntu 10.10 64bit) * Linux swap swap- RAM size, 3GB (sda4) * Linux root Ext3- 15,9GB (Extended)(sda5) (OpenSuse or Puppy) Here is my New Ubuntu 10.10 64bit layout in use now: * SYSTEM partition NTFS 199MB (Primary) (sda1) **Partition 1 does not end on cylinder boundary.(?)** * (C:) Windows 7 system partition NTFS - 90GB (Primary) (sda2) * (D:) Windows 7 RECOVERY partition NTFS - 12,90GB (Primary) (sda3) * Linux system partition EXTENDED - 195GB (Logical) * Linux root Ext4- 10GB (Extended) (sda5) * Linux home Ext3- 185GB (Extended) (sda6) I didn't know if I could wipe all previous partitions when i installed Ubuntu because of the RECOVERY partition so I just made the space for my extended partition by deleting the HP_TOOLS (Fat32). By doing this I managed to make and successfully install Ubuntu 64 but I couldn't actually make the partition for the swap or a third Linux OS. Question 1: What is the right way to Windows 7/Ubuntu 10.10 Dual-Triple Boot Partitioning for Laptop OEM?? Thank you in advance for your advises and suggestions and Happy New Year to All!!

    Read the article

< Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >