Search Results

Search found 23131 results on 926 pages for 'ms query'.

Page 550/926 | < Previous Page | 546 547 548 549 550 551 552 553 554 555 556 557  | Next Page >

• How to export Oracle statistics

  - by A_M

  Hi, I am writing some new SQL queries and want to check the query plans that the Oracle query optimiser would come up with in production. My development database doesn't have anything like the data volumes of the production database. How can I export database statistics from a production database and re-import them into a development database? I don't have access to the production database, so I can't simply generate explain plans on production without going through a third party hosting organisation. This is painful. So I want a local database which is in some way representative of production on which I can try out different things. Also, this is for a legacy application. I'd like to "improve" the schema, by adding appropriate indexes. constraints, etc. I need to do this in my development database first, before rolling out to test and production. If I add an index and re-generate statistics in development, then the statistics will be generated around the development data volumes, which makes it difficult to assess the impact my changes on production. Does anyone have any tips on how to deal with this? Or is it just a case of fixing unexpected behaviour once we've discovered it on production? I do have a staging database with production volumes, but again I have to go through a third party to run queries against this, which is painful. So I'm looking for ways to cut out the middle man as much as possible. All this is using Oracle 9i. Thanks.

  Read the article

• Trouble with resolving hostnames on CentOS using Bind

  - by cabaret

  I'm taking a course on server administration at school and I have managed to set up virtual hosting in apache and a dns server on a virtual machine. However, I have now set up an old pc to run CentOS and I'm trying the same on that box. The problem I ran into now is that I can't resolve hostnames from the linux box. I have set up the nameserver in /etc/resolv.conf to the IP of the CentOS machine, but when I try for example ping google.com I get ping: unknown host google.com However, when I do ping 66.102.13.105 (which is the Google IP, figured that out by pinging on my mac) I get: PING 66.102.13.105 (66.102.13.105) 56(84) bytes of data. 64 bytes from 66.102.13.105: icmp_seq=1 ttl=52 time=15.5 ms Slightly confused why this is happening. Could it be because of my router sitting in between the linux machine and the cable modem? It's a D-Link somethingsomething. Thanks in advance

  Read the article

• Change Default Email Delay - Adding Marcro to the Correct Toolbar in a NEW Message

  - by PhilipB

  Please refer to this article: Outlook: Change default email delay for "Do not deliver before" feature But, how do I add this macro to the toolbar for a new email message?? I can add it to the toolbars that show in the main Outlook window but not on the toolbar in a new message. Does using Word as the editor have anything to do with this? Does that mean that I need to create the macro in MS Word? I need it on my toolbar in a new message window, please...

  Read the article

• Need to get 3 record for database on current date using sqlite

  - by Umaid

  SELECT rowid, Day, Advice from MainCategory where ((Day = ((cast(strftime('%d',date('now','-1 day')) as Integer)))) and (Month = (strftime('%m',date('now'))))) and ((Day = ((cast(strftime('%d',date('now')) as Integer)))) and (Month = (strftime('%m',date('now'))))) , ((Day = ((cast(strftime('%d',date('now','+1 day')) as Integer)))) and (Month = (strftime('%m',date('now',+1 month))))); What if i make my Month column in Integer data type then it would be. SELECT rowid, Month, Day, Advice from MainCategory where ((Day = ((cast(strftime('%d',date('now','-1 day')) as Integer)))) and (Month = (strftime('%m',date('now'))))) and ((Day = ((cast(strftime('%d',date('now')) as Integer)))) and (Month = (strftime('%m',date('now'))))) , ((Day = ((cast(strftime('%d',date('now','+1 day')) as Integer)))) and (Month = (strftime('%m',date('now',+1 month))))); Please note that I have over this scenerio when I am in middle of month but below query returns 2 records and 1 from begining from all 11 months as (feb is exclusive) then record will be 33 but i need three 3 records from the table and increment it on next button. Please write 3 querys one which return all three record on current date, next all 3 records must be incremented by 1 on every next button click finally all 3 records must be decremented by 1 on every previous button click keep last day and begining date on the month in minds else i have also achieved for middle of month. Running query but returns 33 records instead of 3. SELECT rowid,Month, Day, Advice from MainCategory where Day in ((cast(strftime('%d',date('now','-1 day')) as Integer)),(cast(strftime('%d',date('now')) as Integer)),(cast(strftime('%d',date('now','+1 day')) as Integer)));

  Read the article

• How can I free all allocated memory at once?

  - by Tommy

  Here is what I am working with: char* qdat[][NUMTBLCOLS]; char** tdat[]; char* ptr_web_data; // Loop thru each table row of the query result set for(row_index = 0; row_index < number_rows; row_index++) { // Loop thru each column of the query result set and extract the data for(col_index = 0; col_index < number_cols; col_index++) { ptr_web_data = (char*) malloc((strlen(Data) + 1) * sizeof(char)); memcpy (ptr_web_data, column_text, strlen(column_text) + 1); qdat[row_index][web_data_index] = ptr_web_data; } } tdat[row_index] = qdat[col_index]; After the data is used, the memory allocated is released one at a time using free(). for(row_index = 0; row_index < number_rows; row_index++) { // Loop thru all columns used for(col_index = 0; col_index < SARWEBTBLCOLS; col_index++) { // Free memory block pointed to by results set array free(tdat[row_index][col_index]); } } Is there a way to release all the allocated memory at once, for this array? Thank You.

  Read the article

• Show users a list of unique items on Java Google App Engine

  - by James

  I've been going round in circles with what must be a very simple challenge but I want to do it the most efficient way from the start. So, I've watched Brett Slatkin's Google IO videos (2008 & 2009) about building scalable apps including http://www.youtube.com/watch?v=AgaL6NGpkB8 and read the docs but as a n00b, I'm still not sure. I'm trying to build an app on GAEJ similar to the original 'hotornot' where a user is presented with an item which they rate. Once they rate it, they are presented with another one which they haven't seen before. My question is this; is it most efficient to do a query up front to grab x items (say 100) and put them in a list (stored in memcache?) or is it better to simply make a query for a new item after each rating. To keep track of the items a user has seen, I'm planning to keep those items' keys in a list property of the user's entity. Does that sound sensible? I've really got myself confused about this so any help would be much appreciated.

  Read the article

• Rename outlook2007 categories not working

  - by Bob Rivers

  Hi, I'm new to outlook 2007 and I'm trying to rename a category. Acordingly to MS, I can achieve it by just renaming it: http://office.microsoft.com/en-us/outlook/HA012316361033.aspx But as soon as I click the OK button, confirming the change, it returns to it's original value. For instance, if I rename the "Blue Category" to "Home" it will accept without erros. But, when I click again in the Categorize icon, I'll see that the "Blue Category" is still there, and my "Home" category does not exist. Has someone experienced this kind of problem? TIA, Bob

  Read the article

• Selecting data in clustered index order without ORDER BY

  - by kcrumley

  I know there is no guarantee without an ORDER BY clause, but are there any techniques to tune SQL Server tables so they're more likely to return rows in clustered index order, without having to specify ORDER BY every single time I want to run a super-quick ad hoc query? For example, would rebuilding my clustered index or updating statistics help? I'm aware that I can't count on a query like: select * from AuditLog where UserId = 992 to return records in the order of the clustered index, so I would never build code into an application based on this assumption. But for simple ad hoc queries, on almost all of my tables, the data consistently comes out in clustered index order, and I've gotten used to being able to expect the most recent results to be at the bottom. Out of all the many tables we use, I've only noticed two ever giving me results in an unpredicted order. This is really just an annoyance, but it would be nice to be able to minimize it. In case this is relevant because of page boundary issues or something like that, I should mention that one of the tables that has inconsistent ordering, the AuditLog table, is the longest table we have that has a clustered index on an identity column. Also, this database has recently been moved from SQL 2005 to SQL 2008, and we've seen no noticeable change in this behavior.

  Read the article

• Using LINQ on observable with GroupBy and Sum aggregate

  - by Mark Oates

  I have the following block of code which works fine; var boughtItemsToday = (from DBControl.MoneySpent bought in BoughtItemDB.BoughtItems select bought); BoughtItems = new ObservableCollection<DBControl.MoneySpent>(boughtItemsToday); It returns data from my MoneySpent table which includes ItemCategory, ItemAmount, ItemDateTime. I want to change it to group by ItemCategory and ItemAmount so I can see where I am spending most of my money, so I created a GroupBy query, and ended up with this; var finalQuery = boughtItemsToday.AsQueryable().GroupBy(category => category.ItemCategory); BoughtItems = new ObservableCollection<DBControl.MoneySpent>(finalQuery); Which gives me 2 errors; Error 1 The best overloaded method match for 'System.Collections.ObjectModel.ObservableCollection.ObservableCollection(System.Collections.Generic.List)' has some invalid arguments Error 2 Argument 1: cannot convert from 'System.Linq.IQueryable' to 'System.Collections.Generic.List' And this is where I'm stuck! How can I use the GroupBy and Sum aggregate function to get a list of my categories and the associated spend in 1 LINQ query?! Any help/suggestions gratefully received. Mark

  Read the article

• Uploading with browser makes all other browser tabs and devices disconnect

  - by fabsenet

  Whenever I upload a video to YouTube all other browser tabs behave like there is no connection at all. It even affects my phone and other computers on the network therefor I think it has to do with my router. When the upload is done everything works normally again. I never observed this behavior with any other upload. My router is a Fritz!Box 7390 and my uploading PC is connected through a 1000mb/s switch (wired) to the router. Uploading through another browser does not change anything. I understand that other sites become slow as the network resources are limited, but stopping altogether feels wrong. speed.io measures for my internet connection: 40.894 Kbit/s down, 2.685 Kbit/s up, 29 ms ping, 2.048 con/m connects

  Read the article

• What is the best way to solve an Objective-C namespace collision?

  - by Mecki

  Objective-C has no namespaces; it's much like C, everything is within one global namespace. Common practice is to prefix classes with initials, e.g. if you are working at IBM, you could prefix them with "IBM"; if you work for Microsoft, you could use "MS"; and so on. Sometimes the initials refer to the project, e.g. Adium prefixes classes with "AI" (as there is no company behind it of that you could take the initials). Apple prefixes classes with NS and says this prefix is reserved for Apple only. So far so well. But appending 2 to 4 letters to a class name in front is a very, very limited namespace. E.g. MS or AI could have an entirely different meanings (AI could be Artificial Intelligence for example) and some other developer might decide to use them and create an equally named class. Bang, namespace collision. Okay, if this is a collision between one of your own classes and one of an external framework you are using, you can easily change the naming of your class, no big deal. But what if you use two external frameworks, both frameworks that you don't have the source to and that you can't change? Your application links with both of them and you get name conflicts. How would you go about solving these? What is the best way to work around them in such a way that you can still use both classes? In C you can work around these by not linking directly to the library, instead you load the library at runtime, using dlopen(), then find the symbol you are looking for using dlsym() and assign it to a global symbol (that you can name any way you like) and then access it through this global symbol. E.g. if you have a conflict because some C library has a function named open(), you could define a variable named myOpen and have it point to the open() function of the library, thus when you want to use the system open(), you just use open() and when you want to use the other one, you access it via the myOpen identifier. Is something similar possible in Objective-C and if not, is there any other clever, tricky solution you can use resolve namespace conflicts? Any ideas? Update: Just to clarify this: answers that suggest how to avoid namespace collisions in advance or how to create a better namespace are certainly welcome; however, I will not accept them as the answer since they don't solve my problem. I have two libraries and their class names collide. I can't change them; I don't have the source of either one. The collision is already there and tips on how it could have been avoided in advance won't help anymore. I can forward them to the developers of these frameworks and hope they choose a better namespace in the future, but for the time being I'm searching a solution to work with the frameworks right now within a single application. Any solutions to make this possible?

  Read the article

• Raising events and object persistence in Django

  - by Mridang Agarwalla

  Hi, I have a tricky Django problem which didn't occur to me when I was developing it. My Django application allows a user to sign up and store his login credentials for a sites. The Django application basically allows the user to search this other site (by scraping content off it) and returns the result to the user. For each query, it does a couple of queries of the other site. This seemed to work fine but sometimes, the other site slaps me with a CAPTCHA. I've written the code to get the CAPTCHA image and I need to return this to the user so he can type it in but I don't know how. My search request (the query, the username and the password) in my Django application gets passed to a view which in turn calls the backend that does the scraping/search. When a CAPTCHA is detected, I'd like to raise a client side event or something on those lines and display the CAPTCHA to the user and wait for the user's input so that I can resume my search. I would somehow need to persist my backend object between calls. I've tried pickling it but it doesn't work because I get the Can't pickle 'lock' object error. I don't know to implement this though. Any help/ideas? Thanks a ton.

  Read the article

• SSIS Transaction with Sql Transaction

  - by Mike

  I started with a package to make sure Transactions are working correctly. The package level transaction is set to Required. I have two Execute Sql Task, one deletes rows from a table and one does 1/0, to throw the error. Both task are set to supported transaction level and Serializable IsolationLevel. That works. Now when I replace my two sql task to two separate procedure calls, the first one, ChargeInterest, runs successful but the second one, PaymentProcess, fails always saying. [Execute SQL Task] Error: Executing the query "Exec [proc_xx_NotesReceivable_PaymentProcess] ..." failed with the following error: "Uncommittable transaction is detected at the end of the batch. The transaction is rolled back.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. PaymentProcess being the second stored procedure. Both procedures have there own BEGIN, COMMIT AND ROLLBACKS inside the SP. I believe that the transactions are being successfully handed in the Charge Interest because I can run the following without issues or the dreaded you started with 0 and now have 1 transaction. EXEC [proc_XX_NotesReceivable_ChargeInterest] 'NR', 'M', 186, 300 EXEC [proc_XX_NotesReceivable_PaymentProcess] 'NR', 186, 300 --OR GO BEGIN TRAN EXEC [proc_XX_NotesReceivable_ChargeInterest] 'NR', 'M', 186, 300 EXEC [proc_XX_NotesReceivable_PaymentProcess] 'NR', 186, 300 ROLLBACK TRAN Now I have noticed that DTC does get kicked off in both instances? Why I am not sure because it is using the same connection. In the live example I can see the transaction get started but disappears if I put a breakpoint on the PreExecute event of the second stored procedure. What is the correct way to mingle SP transactions with SSIS transactions?

  Read the article

• Hibernate noob fetch join problem

  - by Bruce

  Hi all I have two classes, Test2 and Test3. Test2 has an attribute test3 that is an instance of Test3. In other words, I have a unidirectional OneToOne association, with test2 having a reference to test3. When I select Test2 from the db, I can see that a separate select is being made to get the details of the associated test3 class. This is the famous 1+N selects problem. To fix this to use a single select, I am trying to use the fetch=join annotation, which I understand to be @Fetch(FetchMode.JOIN) However, with fetch set to join, I still see separate selects. Here are the relevant portions of my setup.. hibernate.cfg.xml: <property name="max_fetch_depth">2</property> Test2: public class Test2 { @OneToOne (cascade=CascadeType.ALL , fetch=FetchType.EAGER) @JoinColumn (name="test3_id") @Fetch(FetchMode.JOIN) public Test3 getTest3() { return test3; } NB I set the FetchType to EAGER out of desperation, even though it defaults to EAGER anyway for OneToOne mappings, but it made no difference. Thanks for any help! Edit: I've pretty much given up on trying to use FetchMode.JOIN - can anyone confirm that they have got it to work ie produce a left outer join? In the docs I see that "Usually, the mapping document is not used to customize fetching. Instead, we keep the default behavior, and override it for a particular transaction, using left join fetch in HQL" If I do a left join fetch instead: query = session.createQuery("from Test2 t2 left join fetch t2.test3"); then I do indeed get the results I want - ie a left outer join in the query.

  Read the article

• Codeigniter php activerecord orm limit and offset

  - by user2167174

  I am a bit stuck with this problem I have in phpactiverecord. What I am trying to do is a pagination so I need to limit and offset the query results. I am accessing all of the user posts like so: $user-post; How can I query this to limit and offset the results? Thanx in advance. Code: public function office() { if (!$this->session->userdata('username')) { redirect(base_url()); } $data = array(); $data['posts'] = []; $user = User::find('first', array('id' => $this->session->userdata('id'))); if ($user != null) { if ($user->post != null) { foreach ($user->post as $post) { $posts = array($post->name, $post->description, $post->date,'<a href="'.base_url().'Posts/edit/'.$post->id.'">Edit</a> <br /><a href="'.base_url().'Posts/delete/'.$post->id.'">Delete</a>'); array_push($data['posts'], $posts); } $this->table->set_heading('Name', 'Description', 'Date', '<a href="'.base_url().'Posts/create">+Add</a>'); $tmpl = array('table_open' => '<table class="table table-stripped table-bordered user-posts">'); $this->table->set_template($tmpl); $data['table'] = $this->table->generate($data['posts']); } $this->load->view('template/header.php'); $this->load->view('Users/office.php', $data); $this->load->view('template/footer.php'); } else { redirect(base_url()); } }

  Read the article

• Ordering by a max or a min from another table

  - by Paul Tomblin

  I have a table that consists of a unique id, and a few other attributes. It holds "schedules". Then I have another table that holds a list of all the times each schedule has or will "fire". This isn't the exact schema, but it's close: create table schedule ( id varchar(40) primary key, attr1 int, attr2 varchar(20) ); create table schedule_times ( id varchar(40) foreign key schedule(id), fire_date date ); I want to query the schedule table, getting the attributes and the next and previous fire_dates, in Java, sometimes ordering on one of the attributes, but sometimes ordering on either previous fire_date or the next fire_date. Ordering by the attributes is easy, I just stick an "order by" into the string while I'm building my prepared statement. I'm not even sure how to go about selecting the last fire_date and the next one in a single query - I know that I can find the next fire_date for a given id by doing a SELECT min(fire_date) FROM schedule_times WHERE id = ? AND fire_date > sysdate; and the similar thing for previous fire_date using max() and fire_date < sysdate. I'm just drawing a blank on how to incorporate that into a single select from the schedule so I can get both next and previous fire_date in one shot, and also how to order by either of those attributes.

  Read the article

• Is it possible, and is it advisable, to host a mail server on a Windows Azure VM role?

  - by JcFx

  I know this question has been asked on various forums before, and that all the answer were negative, but many of the answers are quite old, and with Azure developing so quickly it seems useful to ask it again. Can we run a mail server (such as mailenable) on an Azure VM? And if not, why not? I've seen one posting on the MS forums (here) that suggests the IP of the Azure machine would be blacklisted as a source of spam. Why would this be (as opposed to hosting a mailserver on a dedicated box)?

  Read the article

• What is happening in this T-SQL code? (Concatenting the results of a SELECT statement)

  - by Ben McCormack

  I'm just starting to learn T-SQL and could use some help in understanding what's going on in a particular block of code. I modified some code in an answer I received in a previous question, and here is the code in question: DECLARE @column_list AS varchar(max) SELECT @column_list = COALESCE(@column_list, ',') + 'SUM(Case When Sku2=' + CONVERT(varchar, Sku2) + ' Then Quantity Else 0 End) As [' + CONVERT(varchar, Sku2) + ' - ' + Convert(varchar,Description) +'],' FROM OrderDetailDeliveryReview Inner Join InvMast on SKU2 = SKU and LocationTypeID=4 GROUP BY Sku2 , Description ORDER BY Sku2 Set @column_list = Left(@column_list,Len(@column_list)-1) Select @column_list ---------------------------------------- 1 row is returned: ,SUM(Case When Sku2=157 Then Quantity Else 0 End) As [157 -..., SUM(Case ... The T-SQL code does exactly what I want, which is to make a single result based on the results of a query, which will then be used in another query. However, I can't figure out how the SELECT @column_list =... statement is putting multiple values into a single string of characters by being inside a SELECT statement. Without the assignment to @column_list, the SELECT statement would simply return multiple rows. How is it that by having the variable within the SELECT statement that the results get "flattened" down into one value? How should I read this T-SQL to properly understand what's going on?

  Read the article

• Deleting pagefile.sys on shutdown

  - by Daniel E. Shub

  I have a Windows XP machine (it is a VM running in Xen) that I would like to backup. I have enabled ClearPageFileAtShutdown by following MS KB 314834. If I cleanly shutdown the XP machine and then mount the drive in another machine (which is trivial since the machine is virtual) I still have a large pagefile.sys. I was hoping that enabling ClearPageFileAtShutdown would result in a pagefile.sys with a size near zero. I have two questions. First, is it possible to have pagefile.sys be deleted, or have a drastic size reduction, at shutdown? Second, can I exclude pagefile.sys from my backup?

  Read the article

• File store: CouchDB vs SQL Server + file system

  - by Andrey

  I'm exploring different ways of storing user-uploaded files (all are MS Office documents or alikes) on our high load web site. It's currently designed to store documents as files and have a SQL database store all metadata for those files. I'm concerned about growing out of the storage server and SQL server performance when number of documents reaches hundreds of millions. I was reading a lot of good information about CouchDB including its built-in scalability and performance, but I'm not sure how storing files as attachments in CouchDB would compare to storing files on a file system in terms of performance. Anybody used CouchDB clusters for storing LARGE amounts of documents and in high load environment?

  Read the article

• How to give alternating table rows different background colors using PHP

  - by Sam

  I have a table of data that is generated dynamically based on the contents stored in a mysql database. This is how my code looks: <table border="1"> <tr> <th>Name</th> <th>Description</th> <th>URL</th> </tr> <?php $query = mysql_query("SELECT * FROM categories"); while ($row = mysql_fetch_assoc($query)) { $catName = $row['name']; $catDes = $row['description']; $catUrl = $row['url']; echo "<tr class=''>"; echo "<td>$catName</td>"; echo "<td>$catDes</td>"; echo "<td>$catUrl</td>"; echo "</tr>"; } ?> </table> Now if the table was static, then I would just assign each alternating table row one of 2 styles in repeated order: .whiteBackground { background-color: #fff; } .grayBackground { background-color: #ccc; } and that would be the end of that. However since the table rows are dynamically generated, how can I achieve this?

  Read the article

• LinqToSQL not updating database

  - by codegarten

  Hi. I created a database and dbml in visual studio 2010 using its wizards. Everything was working fine until i checked the tables data (also in visual studio server explorer) and none of my updates were there. using (var context = new CenasDataContext()) { context.Log = Console.Out; context.Cenas.InsertOnSubmit(new Cena() { id = 1}); context.SubmitChanges(); } This is the code i am using to update my database. At this point my database has one table with one field (PK) named ID. *INSERT INTO [dbo].Cenas VALUES (@p0) -- @p0: Input Int (Size = -1; Prec = 0; Scale = 0) [1] -- Context: SqlProvider(Sql2008) Model: AttributedMetaModel Build: 4.0.30319.1* This is LOG from the execution (printed the context log into the console). The problem i'm having is that these updates are not persistent in the database. I mean that when i query my database (visual studio server explorer - new query) i see the table is empty, every time. I am using a SQL Server database file (.mdf).

  Read the article

• [XPATH] Retrieve specific preceding sibling nodes attributes

  - by Matthieu BROUILLARD

  Is there an XPath way of recovering directly one specific attribute of preceding sibling nodes of an XML node using an XPath query? In the following example, I would like to retrieve the values of the alt attribute of each img nodes that precede the div element marked with the id=marker. <content> <img alt="1" src="file.gif" /> <img alt="2" src="file.gif" /> <img alt="3" src="file.gif" /> <img alt="4" src="file.gif" /> <div id='marker'></div> </content> For this example, I want to retrieve the values 1 2 3 4. I use the following XPath query //div[@id='marker']/preceding-sibling::img in order to retrieve the node list I want <img alt="1" src="file.gif"/> <img alt="2" src="file.gif"/> <img alt="3" src="file.gif"/> <img alt="4" src="file.gif"/> As it is a node list I can then iterate on the nodes to retrieve the attribute value I am looking for, but is there an XPath way of doing it? I would have expected to be able to write something like: //div[@id='marker']/preceding-sibling::img@alt or //div[@id='marker']/preceding-sibling@alt::img but I don't even know if it is possible once you have used an XPath Axe like preceding-sibling.

  Read the article

• I am not able to update form data to MySQL using PHP and jQuery

  - by Jimson Jose

  My problem is that I am unable to update the values entered in the form. I have attached all the files. I'm using MYSQL database to fetch data. What happens is that I'm able to add and delete records from form using jQuery and PHP scripts to MYSQL database, but I am not able to update data which was retrieved from the database. The file structure is as follows: index.php is a file with jQuery functions where it displays form for adding new data to MYSQL using save.php file and list of all records are view without refreshing page (calling load-list.php to view all records from index.php works fine, and save.php to save data from form) - Delete is an function called from index.php to delete record from MySQL database (function calling delete.php works fine) - Update is an function called from index.php to update data using update-form.php by retriving specific record from MySQL table, (works fine) Problem lies in updating data from update-form.php to update.php (in which update query is written for MySQL) I have tried in many ways - at last I had figured out that data is not being transferred from update-form.php to update.php; there is a small problem in jQuery AJAX function where it is not transferring data to update.php page. Something is missing in calling update.php page it is not entering into that page. I am new bee in programming. I had collected this script from many forums and made this one. So I was limited in solving this problem. I came to know that this is good platform for me and many where we get a help to create new things. Please find the link below to download all files which is of 35kb (virus free assurance): download mysmallform files in ZIPped format, including mysql query

  Read the article

• How do I include a frameset under CGI.pm?

  - by neversaint

  I want to have a cgi-script that does two things. Take the input from a form. Generate results base on the input values on a frame. I also want the frame to exist only after the result is generated/printed. Below is the simplified code of what I want to do. But somehow it doesn't work. What's the right way to do it? #!/usr/local/bin/perl use CGI ':standard'; print header; print start_html('A Simple Example'), h1('A Simple Example'), start_form, "What's your name? ",textfield('name'), p, "What's the combination?", p, checkbox_group(-name=>'words', -values=>['eenie','meenie','minie','moe'], -defaults=>['eenie','minie']), p, "What's your favorite color? ", popup_menu(-name=>'color', -values=>['red','green','blue','chartreuse']), p, submit, end_form, hr; if (param()) { # begin create the frame print <<EOF; <html><head><title>$TITLE</title></head> <frameset rows="10,90"> <frame src="$script_name/query" name="query"> <frame src="$script_name/response" name="response"> </frameset> EOF # Finish creating frame print "Your name is: ",em(param('name')), p, "The keywords are: ",em(join(", ",param('words'))), p, "Your favorite color is: ",em(param('color')), hr; } print end_html;

  Read the article

< Previous Page | 546 547 548 549 550 551 552 553 554 555 556 557  | Next Page >