Search Results

Search found 24353 results on 975 pages for 'test coverage'.

Page 552/975 | < Previous Page | 548 549 550 551 552 553 554 555 556 557 558 559  | Next Page >

• Apache no longer starts at Windows boot up

  - by w3d

  I have Apache installed as part of XAMPP - local test server. It is configured as a Windows (XP) Service. Startup type is "Automatic". For a long time now it has always started when Windows boots up, but recently this has stopped happening. I now need to start it manually via the XAMPP Control Panel - at which point it appears to start up perfectly OK. The only recent updates to the machine (that I recall) are Windows Updates - none of which appear to have "known issues" that relate to this. And updates to Google Chrome. Any ideas what could prevent Apache from starting automatically at Windows (XP) boot up? EDIT#1 There are 2 related Errors in my system event log regarding the Service Control Manager: Timeout (30000 milliseconds) waiting for the Apache2.2 service to connect. The Apache2.2 service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion. When I manually start the Apache server after boot up there are 2 "information" events stating that it was "sent a start control" and that it "entered the running state". Although I notice it appears to take 19 seconds between the start control being sent and entering a running state - according to the event log. So, maybe 30 seconds during boot up isn't long enough (anymore) for Apache to start??

  Read the article

• How to compare speed of graphics cards in Windows desktop environment?

  - by Al Kepp

  I use Windows 7 and Intel Core i3 CPU with integrated graphics. My problem is that it eats valuable system RAM for display. I can replace it with an old PCIe Radeon X700, so all system RAM will be usable for applications. The question is if an old Radeon X700 is comparable in W7 desktop speed to a new integrated i3 graphics. Are there any test programs which compare the speed of graphic cards in Windows 7 desktop environment (i.e. no Direct3D games, just Windows desktop)? (According to Tomshardware, Radeon X700 is probably even faster than Core i3 in 3D. But there are no native WDDM 1.1 W7 drivers for X700, only WDDM 1.0 Vista drivers are available.)

  Read the article

• What software can I use to read png metadata?

  - by Johan

  I know that I can create a simple little Qt based application that adds and read png metadata, using the QImage.setText(...) and QImage.text(...). That metadata can then be read with a linux command called pngmeta. But what other image software can I use to read out the png metadata? Please note that I'm seeking image programs for the common platforms, so please specify if your application is for Windows or Linux. To make the question clearer I attached a img with some test metadata attached to it. Thanks Johan Links: http://en.wikipedia.org/wiki/Portable_Network_Graphics - png http://en.wikipedia.org/wiki/Extensible_Metadata_Platform - xmp metadata

  Read the article

• Email sent from server with rDNS & SPF being blocked by Hotmail

  - by Canadaka

  I have been unable to send email to users on hotmail or other Microsoft email servers for some time. Its been a major headache trying to find out why and how to fix the issue. The emails being sent that are blocked from my domain canadaka.net. I use Google Aps to host my regular email serverice for my @canadaka.net email addresses. I can sent email from my desktop or gmail to a hotmail without any problem. But any email sent from my server on behalf of canadaka.net is blocked, not even arriving in the junk email. The IP that the emails are being sent from is the same IP that my site is hosted on: 66.199.162.177 This IP is new to me since August 2010, I had a different IP for the previous 3-4 years. This IP is not on any credible spam lists http://www.anti-abuse.org/multi-rbl-check-results/?host=66.199.162.177 The one list spamcannibal.org my IP is listed on seems to be out of my control, says "no reverse DNS, MX host should have rDNS - RFC1912 2.1". But since I use Google for my email hosting, I don't have control over setting up RDNS for all the MX records. I do have Reverse DNS setup for my IP though, it resolves to "mail.canadaka.net". I have signed up for SNDS and was approved. My ip says "All of the specified IPs have normal status." Sender Score: 100 https://www.senderscore.org/lookup.php?lookup=66.199.162.177&ipLookup.x=55&ipLookup.y=14 My Mcafee threat level seems fine I have a TXT SPF record setup, I am currently using xname.org as my DNS, and they don't have a field for SPF, but their FAQ says to add the SPF info as a TXT entry. v=spf1 a include:_spf.google.com ~all Some "SPF checking" tools ive used detect that my domain has a valid SPF, but others don't. Like Microsoft's SPF wizard, i think this is because its specifically looking for an SPF record and not in the TXT. "No SPF Record Found. A and MX Records Available". From my home I can run "nslookup -type=TXT canadaka.net" and it returns: Server: google-public-dns-a.google.com Address: 8.8.8.8 Non-authoritative answer: canadaka.net text = "v=spf1 a include:_spf.google.com ~all" One strange thing I found is i'm unable to ping hotmail.com or msn.com or do a "telnet mail.hotmail.com 25". I am able to ping gmail.com and many other domains I tried. I tried changing my DNS servers to Google's Public DNS and did a ipconfig /flushdns but that had no effect. I am however able to connect with telnet to mx1.hotmail.com This is what the email headers look like when I send to a Google email server and I receive the email with no troubles. You can see that SPF is passing. Delivered-To: [email protected] Received: by 10.146.168.12 with SMTP id q12cs91243yae; Sun, 27 Feb 2011 18:01:49 -0800 (PST) Received: by 10.43.48.7 with SMTP id uu7mr4292541icb.68.1298858509242; Sun, 27 Feb 2011 18:01:49 -0800 (PST) Return-Path: Received: from canadaka.net ([66.199.162.177]) by mx.google.com with ESMTP id uh9si8493137icb.127.2011.02.27.18.01.45; Sun, 27 Feb 2011 18:01:48 -0800 (PST) Received-SPF: pass (google.com: domain of [email protected] designates 66.199.162.177 as permitted sender) client-ip=66.199.162.177; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates 66.199.162.177 as permitted sender) [email protected] Message-Id: <[email protected] Received: from coruscant ([127.0.0.1]:12907) by canadaka.net with [XMail 1.27 ESMTP Server] id for from ; Sun, 27 Feb 2011 18:01:29 -0800 Date: Sun, 27 Feb 2011 18:01:29 -0800 Subject: Test To: [email protected] From: XXXX Reply-To: [email protected] X-Mailer: PHP/5.2.13 I can send to gmail and other email services fine. I don't know what i'm doing wrong! UPDATE 1 I have been removed from hotmails IP block and am now able to send emails to hotmail, but they are all going directly to the JUNK folder. UPDATE 2 I used Telnet to send a test message to port25.com, seems my SPF is not being detected. Result: neutral (SPF-Result: None) canadaka.net. SPF (no records) canadaka.net. TXT (no records) I do have a TXT record, its been there for years, I did change it a week ago. Other sites that allow you to check your SPF detect it, but some others like Microsofts Wizard doesn't. This iw what my SPF record in my xname.org DNS file looks like: canadaka.net. 86400 IN TXT "v=spf1 a include:_spf.google.com ~all" I did have a nameserver as my 4th option that doens't have the TXT records since it doens't support it. So I removed it from the list and instead added wtfdns.com as my 4th adn 5th nameservers, which does support TXT.

  Read the article

• Database Web Service using Toplink DB Provider

  - by Vishal Jain

  With JDeveloper 11gR2 you can now create database based web services using JAX-WS Provider. The key differences between this and the already existing PL/SQL Web Services support is:Based on JAX-WS ProviderSupports SQL Queries for creating Web ServicesSupports Table CRUD OperationsThis is present as a new option in the New Gallery under 'Web Services'When you invoke the New Gallery option, it present you with three options to choose from:In this entry I will explain the options of creating service based on SQL queries and Table CRUD operations.SQL Query based Service When you select this option, on 'Next' page it asks you for the DB Conn details. You can also choose if you want SOAP 1.1 or 1.2 format. For this example, I will proceed with SOAP 1.1, the default option.On the Next page, you can give the SQL query. The wizard support Bind Variables, so you can parametrize your queries. Give "?" as a input parameter you want to give at runtime, and the "Bind Variables" button will get enabled. Here you can specify the name and type of the variable.Finish the wizard. Now you can test your service in Analyzer:See that the bind variable specified comes as a input parameter in the Analyzer Input Form:CRUD OperationsFor this, At Step 2 of Wizard, select the radio button "Generate Table CRUD Service Provider"At the next step, select the DB Connection and the table for which you want to generate the default set of operations:Finish the Wizard. Now, run the service in Analyzer for a quick check.See that all the basic operations are exposed:

  Read the article

• Minecraft-style player-gound collision detection

  - by khyperia

  The title pretty much says it all... (Minecraft is a game consisting of evenly-spaced cubes for terrain, like voxels) Note: I am using C# XNA. I am pretty sure AABB is the way to go, yet I don't know how to implement it. I admit, I'm almost looking for code, but theories/ideas are very welcome. Important capabilities of my code: I have a function that can get a block anywhere in the world, and get a BoundingBox for that cube. Hence, I have created a BoundingBox for the player to collide with those cubes. My idea was to get the blocks around the player (maybe 4x6x4) and test against those. The problems I have been having: Say the world is a flat plane. If I use the method of go the shortest distance out, then if the player is slightly clipped into the ground (from gravity), but even slighter into the next block over, then the player will be pushed sideways (and so cannot walk along ground). Of course, this is assuming I react to every block intersected. Another problem is knowing which direction to go (aka negative x or positive). That takes me to my final problem- Getting the amount of intersection, in the correct direction (+ or -) has been tough for me. I hope I haven't been too hard to understand, I'm not too good at explaining things... And if this question has already been asked, I'm sorry, I looked for it... for 3 days straight. One last thing, if someone knows exactly how minecraft does it, or has source (I know MC modders have the source, how else would they mod), please point me to it.

  Read the article

• Thinktecture.IdentityModel: WRAP and SWT Support

  - by Your DisplayName here!

  The latest drop of Thinktecture.IdentityModel contains some helpers for the Web Resource Authorization Protocol (WRAP) and Simple Web Tokens (SWT). WRAP The WrapClient class is a helper to request SWT tokens via WRAP. It supports issuer/key, SWT and SAML input credentials, e.g.: var client = new WrapClient(wrapEp); var swt = client.Issue(issuerName, issuerKey, scope); All Issue overrides return a SimpleWebToken type, which brings me to the next helper class. SWT The SimpleWebToken class wraps a SWT token. It combines a number of features: conversion between string format and CLR type representation creation of SWT tokens validation of SWT token projection of SWT token as IClaimsIdentity helpers to embed SWT token in headers and query strings The following sample code generates a SWT token using the helper class: private static string CreateSwtToken() {     var signingKey = "wA…";     var audience = "http://websample";     var issuer = "http://self";       var token = new SimpleWebToken(       issuer, audience, Convert.FromBase64String(signingKey));     token.AddClaim(ClaimTypes.Name, "dominick");     token.AddClaim(ClaimTypes.Role, "Users");     token.AddClaim(ClaimTypes.Role, "Administrators");     token.AddClaim("simple", "test");       return token.ToString(); }

  Read the article

• DKIM, SPF, PTR records are not working properly with my domain

  - by shihon

  I configured my server and well authenticate email system with DKIM key, SPF record and PTR records, when i start to sent out mails from phplist interface to my users ~50000, my domain is spammed by google. In headers, signed by and mailed by tag shows by my domain : appmail.co, I also test my domain via check mail provide by port25, report is: This message is an automatic response from Port25's authentication verifier service at verifier.port25.com. The service allows email senders to perform a simple check of various sender authentication mechanisms. It is provided free of charge, in the hope that it is useful to the email community. While it is not officially supported, we welcome any feedback you may have at . Thank you for using the verifier, The Port25 Solutions, Inc. team ========================================================== Summary of Results SPF check: pass DomainKeys check: neutral DKIM check: pass Sender-ID check: pass SpamAssassin check: ham ========================================================== Details: HELO hostname: app.appmail.co Source IP: 108.179.192.148 mail-from: [email protected] SPF check details: Result: pass ID(s) verified: [email protected] DNS record(s): appmail.co. SPF (no records) appmail.co. 14400 IN TXT "v=spf1 +a +mx +ip4:108.179.192.148 ?all" appmail.co. 14400 IN A 108.179.192.148 DomainKeys check details: Result: neutral (message not signed) ID(s) verified: [email protected] DNS record(s): DKIM check details: Result: pass (matches From: [email protected]) ID(s) verified: header.d=appmail.co Canonicalized Headers: content-type:multipart/alternative;'20'boundary=047d7b2eda75d8544d04c17b6841'0D''0A' to:[email protected]'0D''0A' from:shashank'20'sharma'20'<[email protected]>'0D''0A' subject:Test'0D''0A' message-id:<CADnDhbH9aDBk3Ho2-CrG7gwOoD6RNX0sFq4bWL64+kmo=9HjWg@mail.gmail.com>'0D''0A' date:Sat,'20'2'20'Jun'20'2012'20'16:44:50'20'+0530'0D''0A' mime-version:1.0'0D''0A' dkim-signature:v=1;'20'a=rsa-sha256;'20'q=dns/txt;'20'c=relaxed/relaxed;'20'd=appmail.co;'20's=default;'20'h=Content-Type:To:From:Subject:Message-ID:Date:MIME-Version;'20'bh=GS6uwlT+weKcrrLJ2I+cjBtWPq9nvhwRlNAJebOiQOk=;'20'b=; Canonicalized Body: --047d7b2eda75d8544d04c17b6841'0D''0A' Content-Type:'20'text/plain;'20'charset=UTF-8'0D''0A' '0D''0A' Hello'20'Senders'0D''0A' '0D''0A' --047d7b2eda75d8544d04c17b6841'0D''0A' Content-Type:'20'text/html;'20'charset=UTF-8'0D''0A' '0D''0A' Hello'20'Senders'0D''0A' '0D''0A' --047d7b2eda75d8544d04c17b6841--'0D''0A' DNS record(s): default._domainkey.appmail.co. 14400 IN TXT "v=DKIM1; k=rsa; p=MHwwDQYJKoZIhvcNAQEBBQADawAwaAJhALGCOdMeZRxRHoatH7/KCvI1CKS0wOOsTAq0LLgPsOpMolifpVQDKOWT2zq/6LHVmDVjXLbnWO2d4ry/riy7ei66pLpnAV5ceIUSjBRusI8jcF9CZhPrh/OImsKVUb9ceQIDAQAB;" NOTE: DKIM checking has been performed based on the latest DKIM specs (RFC 4871 or draft-ietf-dkim-base-10) and verification may fail for older versions. If you are using Port25's PowerMTA, you need to use version 3.2r11 or later to get a compatible version of DKIM. Sender-ID check details: Result: pass ID(s) verified: [email protected] DNS record(s): appmail.co. SPF (no records) appmail.co. 14400 IN TXT "v=spf1 +a +mx +ip4:108.179.192.148 ?all" appmail.co. 14400 IN A 108.179.192.148 SpamAssassin check details: SpamAssassin v3.3.1 (2010-03-16) Result: ham (-0.1 points, 5.0 required) pts rule name description ---- ---------------------- -------------------------------------------------- -0.0 T_RP_MATCHES_RCVD Envelope sender domain matches handover relay domain 0.0 HTML_MESSAGE BODY: HTML included in message -0.5 BAYES_05 BODY: Bayes spam probability is 1 to 5% [score: 0.0288] -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature 0.5 SINGLE_HEADER_1K A single header contains 1K-2K characters ========================================================== Original Email Return-Path: <[email protected]> Received: from app.appmail.co (108.179.192.148) by verifier.port25.com id hp7qqo11u9cc for <[email protected]>; Sat, 2 Jun 2012 07:14:52 -0400 (envelope-from <[email protected]>) Authentication-Results: verifier.port25.com; spf=pass [email protected] Authentication-Results: verifier.port25.com; domainkeys=neutral (message not signed) [email protected] Authentication-Results: verifier.port25.com; dkim=pass (matches From: [email protected]) header.d=appmail.co Authentication-Results: verifier.port25.com; sender-id=pass [email protected] DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=appmail.co; s=default; h=Content-Type:To:From:Subject:Message-ID:Date:MIME-Version; bh=GS6uwlT+weKcrrLJ2I+cjBtWPq9nvhwRlNAJebOiQOk=;b=pNw3UQNMoNyZ2Ujv8omHGodKVu/55S8YdBEsA5TbRciga/H7f+5noiKvo60vU6oXYyzVKeozFHDoOEMV6m5UTgkdBefogl+9cUIbt5CSrTWA97D7tGS97JblTDXApbZH; Received: from mail-pb0-f46.google.com ([209.85.160.46]:57831) by app.appmail.co with esmtpa (Exim 4.77) (envelope-from <[email protected]>) id 1SamIF-00055f-Om for [email protected]; Sat, 02 Jun 2012 16:44:51 +0530 Received: by pbbrp8 with SMTP id rp8so4165728pbb.5 for <[email protected]>; Sat, 02 Jun 2012 04:14:51 -0700 (PDT) MIME-Version: 1.0 Received: by 10.68.216.33 with SMTP id on1mr19414885pbc.105.1338635690988; Sat, 02 Jun 2012 04:14:50 -0700 (PDT) Received: by 10.143.66.13 with HTTP; Sat, 2 Jun 2012 04:14:50 -0700 (PDT) Date: Sat, 2 Jun 2012 16:44:50 +0530 Message-ID: <CADnDhbH9aDBk3Ho2-CrG7gwOoD6RNX0sFq4bWL64+kmo=9HjWg@mail.gmail.com> Subject: Test From: shashank sharma <[email protected]> To: [email protected] Content-Type: multipart/alternative; boundary=047d7b2eda75d8544d04c17b6841 X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - app.appmail.co X-AntiAbuse: Original Domain - verifier.port25.com X-AntiAbuse: Originator/Caller UID/GID - [47 12] / [47 12] X-AntiAbuse: Sender Address Domain - appmail.co --047d7b2eda75d8544d04c17b6841 Content-Type: text/plain; charset=UTF-8 Hello Senders --047d7b2eda75d8544d04c17b6841 Content-Type: text/html; charset=UTF-8 Hello Senders --047d7b2eda75d8544d04c17b6841-- I also tried to send mail on yahoo , rediff but i get mails in spam. Please help me to sort out this issue

  Read the article

• Installing SharePoint 2010 and PowerPivot for SharePoint on Windows 7

  - by smisner

  Many people like me want (or need) to do their business intelligence development work on a laptop. As someone who frequently speaks at various events or teaches classes on all subjects related to the Microsoft business intelligence stack, I need a way to run multiple server products on my laptop with reasonable performance. Once upon a time, that requirement meant only that I had to load the current version of SQL Server and the client tools of choice. In today's post, I'll review my latest experience with trying to make the newly released Microsoft BI products work with a Windows 7 operating system. The entrance of Microsoft Office SharePoint Server 2007 into the BI stack complicated matters and I started using Virtual Server to establish a "suitable" environment. As part of the team that delivered a lot of education as part of the Yukon pre-launch activities (that would be SQL Server 2005 for the uninitiated), I was working with four - yes, four - virtual servers. That was a pretty brutal workload for a 2GB laptop, which worked if I was very, very careful. It could also be a finicky and unreliable configuration as I learned to my dismay at one TechEd session several years ago when I had to reboot a very carefully cached set of servers just minutes before my session started. Although it worked, it came back to life very, very slowly much to the displeasure of the audience. They couldn't possibly have been less pleased than me. At that moment, I resolved to get the beefiest environment I could afford and consolidate to a single virtual server. Enter the 4GB 64-bit laptop to preserve my sanity and my livelihood. Likewise, for SQL Server 2008, I managed to keep everything within a single virtual server and I could function reasonably well with this approach. Now we have SQL Server 2008 R2 plus Office SharePoint Server 2010. That means a 64-bit operating system. Period. That means no more Virtual Server. That means I must use Hyper-V or another alternative. I've heard alternatives exist, but my few dabbles in this area did not yield positive results. It might have been just me having issues rather than any failure of those technologies to adequately support the requirements. My first run at working with the new BI stack configuration was to set up a 64-bit 4GB laptop with a dual-boot to run Windows Server 2008 R2 with Hyper-V. However, I was generally not happy with running Windows Server 2008 R2 on my laptop. For one, I couldn't put it into sleep mode, which is helpful if I want to prepare for a presentation beforehand and then walk to the podium without the need to hold my laptop in its open state along the way (my strategy at the TechEd session long, long ago). Secondly, it was finicky with projectors. I had issues from time to time and while I always eventually got it to work, I didn't appreciate those nerve-wracking moments wondering whether this would be the time that it wouldn't work. Somewhere along the way, I learned that it was possible to load SharePoint 2010 in a Windows 7 which piqued my interest. I had just acquired a new laptop running Windows 7 64-bit, and thought surely running the BI stack natively on my laptop must be better than running Hyper-V. (I have not tried booting to Hyper-V VHD yet, but that's on my list of things to try so the jury of one is still out on this approach.) Recently, I had to build up a server with the RTM versions of SQL Server 2008 R2 and Sharepoint Server 2010 and decided to follow suit on my Windows 7 Ultimate 64-bit laptop. The process is slightly different, but I'm happy to report that it IS possible, although I had some fits and starts along the way. DISCLAIMER: These products are NOT intended to be run in production mode on the Windows 7 operating system. The configuration described in this post is strictly for development or learning purposes and not supported by Microsoft. If you have trouble, you will NOT get help from them. I might be able to help, but I provide no guarantees of my ability or availablity to help. I won't provide the step-by-step instructions in this post as there are other resources that provide these details, but I will provide an overview of my approach, point you to the relevant resources, describe some of the problems I encountered, and explain how I addressed those problems to achieve my desired goal. Because my goal was not simply to set up SharePoint Server 2010 on my laptop, but specifically PowerPivot for SharePoint, I started out by referring to the installation instructions at the PowerPiovt-Info site, but mainly to confirm that I was performing steps in the proper sequence. I didn't perform the steps in Part 1 because those steps are applicable only to a server operating system which I am not running on my laptop. Then, the instructions in Part 2, won't work exactly as written for the same reason. Instead, I followed the instructions on MSDN, Setting Up the Development Environment for SharePoint 2010 on Windows Vista, Windows 7, and Windows Server 2008. In general, I found the following differences in installation steps from the steps at PowerPivot-Info: You must copy the SharePoint installation media to the local drive so that you can edit the config.xml to allow installation on a Windows client. You also have to manually install the prerequisites. The instructions provides links to each item that you must manually install and provides a command-line instruction to execute which enables required Windows features. I will digress for a moment to save you some grief in the sequence of steps to perform. I discovered later that a missing step in the MSDN instructions is to install the November CTP Reporting Services add-in for SharePoint. When I went to test my SharePoint site (I believe I tested after I had a successful PowerPivot installation), I ran into the following error: Could not load file or assembly 'RSSharePointSoapProxy, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified. I was rather surprised that Reporting Services was required. Then I found an article by Alan le Marquand, Working Together: SQL Server 2008 R2 Reporting Services Integration in SharePoint 2010,that instructed readers to install the November add-in. My first reaction was, "Really?!?" But I confirmed it in another TechNet article on hardware and software requirements for SharePoint Server 2010. It doesn't refer explicitly to the November CTP but following the link took me there. (Interestingly, I retested today and there's no longer any reference to the November CTP. Here's the link to download the latest and greatest Reporting Services Add-in for SharePoint Technologies 2010.) You don't need to download the add-in anymore if you're doing a regular server-based installation of SharePoint because it installs as part of the prerequisites automatically. When it was time to start the installation of SharePoint, I deviated from the MSDN instructions and from the PowerPivot-Info instructions: On the Choose the installation you want page of the installation wizard, I chose Server Farm. On the Server Type page, I chose Complete. At the end of the installation, I did not run the configuration wizard. Returning to the PowerPivot-Info instructions, I tried to follow the instructions in Part 3 which describe installing SQL Server 2008 R2 with the PowerPivot option. These instructions tell you to choose the New Server option on the Setup Role page where you add PowerPivot for SharePoint. However, I ran into problems with this approach and got installation errors at the end. It wasn't until much later as I was investigating an error that I encountered Dave Wickert's post that installing PowerPivot for SharePoint on Windows 7 is unsupported. Uh oh. But he did want to hear about it if anyone succeeded, so I decided to take the plunge. Perseverance paid off, and I can happily inform Dave that it does work so far. I haven't tested absolutely everything with PowerPivot for SharePoint but have successfully deployed a workbook and viewed the PowerPivot Management Dashboard. I have not yet tested the data refresh feature, but I have installed. Continue reading to see how I accomplished my objective. I unintalled SQL Server 2008 R2 and started again. I had different problems which I don't recollect now. However, I uninstalled again and approached installation from a different angle and my next attempt succeeded. The downside of this approach is that you must do all of the things yourself that are done automatically when you install PowerPivot as a new server. Here are the steps that I followed: Install SQL Server 2008 R2 to get a database engine instance installed. Run the SharePoint configuration wizard to set up the SharePoint databases. In Central Administration, create a Web application using classic mode authentication as per a TechNet article on PowerPivot Authentication and Authorization. Then I followed the steps I found at How to: Install PowerPivot for SharePoint on an Existing SharePoint Server. Especially important to note - you must launch setup by using Run as administrator. I did not have to manually deploy the PowerPivot solution as the instructions specify, but it's good to know about this step because it tells you where to look in Central Administration to confirm a successful deployment. I did spot some incorrect steps in the instructions (at the time of this writing) in How To: Configure Stored Credentials for PowerPivot Data Refresh. Specifically, in the section entitled Step 1: Create a target application and set the credentials, both steps 10 and 12 are incorrect. They tell you to provide an actual Windows user name and password on the page where you are simply defining the prompts for your application in the Secure Store Service. To add the Windows user name and password that you want to associate with the application - after you have successfully created the target application - you select the target application and then click Set credentials in the ribbon. Lastly, I followed the instructions at How to: Install Office Data Connectivity Components on a PowerPivot server. However, I have yet to test this in my current environment. I did have several stops and starts throughout this process and edited those out to spare you from reading non-essential information. I believe the explanation I have provided here accurately reflect the steps I followed to produce a working configuration. If you follow these steps and get a different result, please let me know so that together we can work through the issue and correct these instructions. I'm sure there are many other folks in the Microsoft BI community that will appreciate the ability to set up the BI stack in a Windows 7 environment for development or learning purposes. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Webserver: chrooted PHP gives mysql.sock error when attempting to reach mysql

  - by Jon L.

  Hey guys, I've configured an Ubuntu webserver with Nginx + PHP5-FPM. I've created a chrooted environment (using jailkit) that I'm tossing my developers into, from where they can develop their test applications. Chroot jail: /home/jail Nginx and PHP5-FPM run outside the chroot, but are configured to function with websites within the chrooted environment. So far, Nginx and PHP5-FPM are serving up files without issue, except for the following: When attempting to connect to MySQL, we receive this error: SQLSTATE[HY000] [2002] Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' Now, I believe the issue is due to the non-chrooted php.ini referencing mysqld.sock outside of the chroot environment (it's actually using the MySQL default setting currently). My question is, how can I configure PHP to access MySQL via loopback or similar? (Found that as a suggestion in a google result, but without any instructions) Or if I'm missing some other obvious setting, let me know. If there's an option of creating a hardlink (that would remain available even if mysql is restarted), that would be handy as well.

  Read the article

• List SQL Server Instances using the Registry

  - by BuckWoody

  I read this interesting article on using PowerShell and the registry, and thought I would modify his information a bit to list the SQL Server Instances on a box. The interesting thing about listing instances this was is that you can touch remote machines, find the instances when they are off and so on. Anyway, here’s the scriptlet I used to find the Instances on my system: $MachineName = '.' $reg = [Microsoft.Win32.RegistryKey]::OpenRemoteBaseKey('LocalMachine', $MachineName) $regKey= $reg.OpenSubKey("SOFTWARE\\Microsoft\\Microsoft SQL Server\\Instance Names\\SQL" ) $regkey.GetValueNames() You can read more of his article to find out the reason for the remote registry call and so forth – there are also security implications here for being able to read the registry. Script Disclaimer, for people who need to be told this sort of thing: Never trust any script, including those that you find here, until you understand exactly what it does and how it will act on your systems. Always check the script on a test system or Virtual Machine, not a production system. Yes, there are always multiple ways to do things, and this script may not work in every situation, for everything. It’s just a script, people. All scripts on this site are performed by a professional stunt driver on a closed course. Your mileage may vary. Void where prohibited. Offer good for a limited time only. Keep out of reach of small children. Do not operate heavy machinery while using this script. If you experience blurry vision, indigestion or diarrhea during the operation of this script, see a physician immediately. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Per Pixel Collision Detection

  - by CJ Cohorst

  Just a quick question, I have this collision detection code: public bool PerPixelCollision(Player player, Game1 dog) { Matrix atob = player.Transform * Matrix.Invert(dog.Transform); Vector2 stepX = Vector2.TransformNormal(Vector2.UnitX, atob); Vector2 stepY = Vector2.TransformNormal(Vector2.UnitY, atob); Vector2 iBPos = Vector2.Transform(Vector2.Zero, atob); for(int deltax = 0; deltax < player.playerTexture.Width; deltax++) { Vector2 bpos = iBPos; for (int deltay = 0; deltay < player.playerTexture.Height; deltay++) { int bx = (int)bpos.X; int by = (int)bpos.Y; if (bx >= 0 && bx < dog.dogTexture.Width && by >= 0 && by < dog.dogTexture.Height) { if (player.TextureData[deltax + deltay * player.playerTexture.Width].A > 150 && dog.TextureData[bx + by * dog.Texture.Width].A > 150) { return true; } } bpos += stepY; } iBPos += stepX; } return false; } What I want to know is where to put in the code where something happens. For example, I want to put in player.playerPosition.X -= 200 just as a test, but I don't know where to put it. I tried putting it under the return true and above it, but under it, it said unreachable code, and above it nothing happened. I also tried putting it by bpos += stepY; but that didn't work either. Where do I put the code? Any help is appreciated. Thanks in advance!

  Read the article

• Using Squid on Debian, Cannot Connect Error

  - by Zed Said

  I am trying to set up Squid on Debian and am getting a connection refused error: squidclient http://www.apple.com/ > test client: ERROR: Cannot connect to 127.0.0.1:3128: Connection refused Here is my config: visible_hostname none cache_effective_user proxy cache_effective_group proxy cache_dir ufs /var/spool/squid 2048 16 256 cache_mem 512 MB cache_access_log /var/log/squid/access.log emulate_httpd_log on strip_query_terms off read_ahead_gap 128 Kb collapsed_forwarding on refresh_stale_hit 30 seconds retry_on_error on maximum_object_size_in_memory 1 MB acl all src 0.0.0.0/0.0.0.0 acl purgehosts src 127.0.0.1/255.255.255.255 # Caching static objects in __data is important. # Without that, apache processes sit around spooling static objects. acl QUERY urlpath_regex /cgi-bin/ /_edit /_admin /_login /_nocache /_recache /__lib /__fudge acl PURGE method PURGE acl POST method POST cache deny QUERY cache deny POST http_access allow PURGE purgehosts http_access deny PURGE http_access allow all http_port 127.0.0.1:80 http_port 50.56.206.139:80 cache_peer 127.0.0.1 parent 80 0 originserver no-query no-digest default redirect_rewrites_host_header off read_ahead_gap 128 Kb shutdown_lifetime 5 seconds Any ideas why this is happening? What have I missed?

  Read the article

• PHP script timed out, or otherwise killed on Apache under CentOS (shared host)

  - by MarkS

  When trying to run a PHP script (CentOS, Apache, PHP 5.2), that may take a long time, it is apparently killed after 45 minutes. PHP script is invoked from a web browser, and in certain situations, it will do a lot of work processing a POP3 mailbox and sending emails as part of an automated monitoring system. Running the PHP script from the command line might be a better option, but I want to understand what is going on so far. I ran a test script, and it appeared to finally give an internal server error (500?) after 45 minutes. Where is this limit set and what is killing the script, if that is what is happening? It's running on a shared host on Hostgator.com.

  Read the article

• How to repair the boot selection on grub?

  - by Zignd

  I had installed on my computer as a dual-boot: Debian Squeeze and Windows XP, so I decided to install Windows 8 just to test and then I would remove it and install in its place Debian Wheezy as dual-boot with Windows XP, that was already installed. During the Debian Wheezy installation, I deleted the Windows 8 partition to install Debian W. on its place. The problem is, that after the installation finished I rebooted the computer and on the grub menu was written: Debian Wheezy and Windows 8 (loader) - this Windows 8 (loader) is a boot manager as grub, and after the Win8 installation I was capable of choose between Win8 and WinXP. And when I select Windows 8 (loader) it says the Windows 8 is corrupted and is not possible to boot Windows XP. So, after that, I would like to know, how can I get Windows XP on the grub menu? Because I know its there (the Windows XP), but I can not boot it from grub. Observation: I already tried update-grub, but it only finds Debian W. and Windows 8.

  Read the article

• Changing the BizTalk message output file name

  - by Bill Osuch

  By default, BizTalk creates the filename of the message dropped to a send port as %MessageID%, which is the unique identifier (GUID) of the message. What if you want to create your own filename? To start, create a simple schema, and a basic orchestration that will receive the message and send it right back out, like this: If you deploy this and wire up the ports, you can drop an xml file into your receive port and have it come out at your send port named something like {7A63CAF8-317B-49D5-871F-9FD57910C3A0}.xml. Now, we'll create a new message with a custom filename. First, create a new orchestration variable called NewFileName, of the type System.String. Next, create a second message using the same schema as the message you're receiving in the Receive shape. Now, drag a Construct Message shape to the orchestration. In the shape's properties, set Messages Constructed to be the new message you just created. Double click the Message Assignment shape (inside the Construct shape...) and paste in the following code: Message_2 = Message_1;   NewFileName = Message_1(FILE.ReceivedFileName); NewFileName = NewFileName.Replace(".xml","_"); NewFileName = NewFileName + "output_" + System.DateTime.Now.Year.ToString() + "-" + System.DateTime.Now.Month.ToString();   Message_2(FILE.ReceivedFileName) = NewFileName; Here we make a copy of the received message, get it's original file name (ReceivedFileName), replace its extension with an underscore, and date-stamp it. Finally, add a Send shape and a Port to the surface, and configure them to send the message you just created. You should wind up with an orchestration like this: Deploy it, and create a new send port. It should be just about identical to the first send port, except this time the file name will be "%SourceFileName%.xml" (without the quotes of course). Fire up the application, drop in a test file, and you should now get both the xml file named with a GUID, and a second file named something along the lines of "MySchemaTestFile_output_2011-6.xml".

  Read the article

• How to simulate slow internet connection

  - by V-Light

  I currently deploy with GAE (google app engine) and I try to implement some AJAX validation. So I got a couple text-fields and "spinners" (ajax loaders) which should be displayed when an AJAX request is sent. But I deploy on my local computer (localhost), so the GAE SDK reacts very fast on any request. It takes about 50-70 ms(miliseconds) to perform the whole ajax request, which is far far away from the real. Is there a way to somehow simulate slow Internet connection? I just want to see how my "spinners" work. I want to test some ajax setting (jquery) about timeouts, errors and so on... Any ideas ?

  Read the article

• When is type testing OK?

  - by svidgen

  Assuming a language with some inherent type safety (e.g., not JavaScript): Given a method that accepts a SuperType, we know that in most cases wherein we might be tempted to perform type testing to pick an action: public void DoSomethingTo(SuperType o) { if (o isa SubTypeA) { o.doSomethingA() } else { o.doSomethingB(); } } We should usually, if not always, create a single, overridable method on the SuperType and do this: public void DoSomethingTo(SuperType o) { o.doSomething(); } ... wherein each subtype is given its own doSomething() implementation. The rest of our application can then be appropriately ignorant of whether any given SuperType is really a SubTypeA or a SubTypeB. Wonderful. But, we're still given is a-like operations in most, if not all, type-safe languages. And that seems suggests a potential need for explicit type testing. So, in what situations, if any, should we or must we perform explicit type testing? Forgive my absent mindedness or lack of creativity. I know I've done it before; but, it was honestly so long ago I can't remember if what I did was good! And in recent memory, I don't think I've encountered a need to test types outside my cowboy JavaScript.

  Read the article

• Tab Sweep: Java EE 6 Scopes, Observer, SSL, Workshop, Virtual Server, JDBC Connection Validation

  - by arungupta

  Recent Tips and News on Java, Java EE 6, GlassFish & more : • How Java EE 6 Scopes Affect User Interactions (DevX.com) • Why is Java EE 6 better than Spring ? (Arun Gupta) • JavaEE Revisits Design Patterns: Observer (Murat Yener) • Getting started with Glassfish V3 and SSL (JavaDude) • Software stacks market share within Jelastic: March 2012 (Jelastic) • All aboard the Java EE 6 Love Boat! (Bert Ertman) • Full stack Java EE workshop (Kito Mann) • Create a virtual server from console in glassfish (Hector Guzman) • Glassfish – JDBC Connection Validation explained (Alexandru Ersenie) • Automatically setting the label of a component in JSF 2 (Arjan Tijms) • JSF2 + Primefaces3 + Spring3 & Hibernate4 Integration Project (Eren Avsarogullari) • THE EXECUTABLE FEEL OF JAX-RS 2.0 CLIENT (Adam Bien) Here are some tweets from this week ... web-app dtd(s) on http://t.co/4AN0057b R.I.P. using http://t.co/OTZrOEEr instead. Thank you Oracle! finally got GlassFish and Cassandra running embedded so I can unit test my app #jarhell #JavaEE6 + #NetBeans is really a pleasure to work with! Reading latest chapter in #Spring vs #JavaEE wars https://t.co/RqlGmBG9 (and yes, #JavaEE6 is better :P) @javarebel very easy install and very easy to use in combination with @netbeans and @glassfish. Save your time.

  Read the article

• Bash Script Exits su or ssh Session Rather than Script

  - by Russ

  I am using CentOS 5.4. I created a bash script that does some checking before running any commands. If the check fails, it will simply exit 0. The problem I am having is that on our server, the script will exit the su or ssh session when the exit 0 is called. #!/bin/bash # check if directory has contents and exit if none if [ -z "`ls /ebs_raid/import/*.txt 2>/dev/null`" ]; then echo "ok" exit 0 fi here is the output: [root@ip-10-251-86-31 ebs_raid]# . test.sh ok [russ@ip-10-251-86-31 ebs_raid]$ as you can see, I was removed from my sudo session, if I wasn't in the sudo session, it would have logged me out of my ssh session. I am not sure what I am doing wrong here or where to start.

  Read the article

• String.IsNullOrWhiteSpace

  - by Scott Dorman

  An empty string is different than an unassigned string variable (which is null), and is a string containing no characters between the quotes (""). The .NET Framework provides String.Empty to represent an empty string, and there is no practical difference between ("") and String.Empty. One of the most common string comparisons to perform is to determine if a string variable is equal to an empty string. The fastest and simplest way to determine if a string is empty is to test if the Length property is equal to 0. However, since strings are reference types it is possible for a string variable to be null, which would result in a runtime error when you tried to access the Length property. Since testing to determine if a string is empty is such a common occurrence, the .NET Framework provides the static method String.IsNullOrEmpty method: public static bool IsNullOrEmpty(string value) { if (value != null) { return (value.Length == 0); }   return true; } It is also very common to determine if a string is empty and contains more than just whitespace characters. For example, String.IsNullOrEmpty("   ") would return false, since this string is actually made up of three whitespace characters. In some cases, this may be acceptable, but in many others it is not. TO help simplify testing this scenario, the .NET Framework 4 introduces the String.IsNullOrWhiteSpace method: public static bool IsNullOrWhiteSpace(string value) { if (value != null) { for (int i = 0; i < value.Length; i++) { if (!char.IsWhiteSpace(value[i])) { return false; } } } return true; }   Using either String.IsNullOrEmpty or String.IsNullOrWhiteSpace helps ensure correctness, readability, and consistency, so they should be used in all situations where you need to determine if a string is null, empty, or contains only whitespace characters. Technorati Tags: .NET,C# 4

  Read the article

• Connecting MS SQL using freetds and unixodbc: isql - no default driver specified

  - by Dejan

  I am trying to connect to the MS SQL database using freetds and unixodbc. I have read various guides how to do it, but no one works fine for me. When I try to connect to the database using isql tool, I get the following error: $ isql -v TS username password [IM002][unixODBC][Driver Manager]Data source name not found, and no default driver specified [ISQL]ERROR: Could not SQLConnect Have anybody already successfully established the connection to the MS SQL database using freetds and unixodbc on Ubuntu 12.04? I would really appreciate some help. Below is the procedure I used to configure the freetds and unixodbc. Thanks for your help in advance! Procedure First, I have installed the following packages sudo apt-get unixodbc unixodbc-dev freetds-dev tdsodbc and configured freetds as follows: --- /etc/freetds/freetds.conf --- [TS] host = SERVER port = 1433 tds version = 7.0 client charset = UTF-8 Using tsql tool I can successfully connect to the database by executing tsql -S TS -U username -P password As I need an odbc connection I configured odbcinst.ini as follows: --- /etc/odbcinst.ini --- [FreeTDS] Description = FreeTDS Driver = /usr/lib/x86_64-linux-gnu/odbc/libtdsodbc.so Setup = /usr/lib/x86_64-linux-gnu/odbc/libtdsS.so FileUsage = 1 CPTimeout = CPResuse = client charset = utf-8 and odbc.ini as follows: --- /etc/odbc.ini --- [TS] Description = "test" Driver = FreeTDS Servername = SERVER Server = SERVER Port = 1433 Database = DBNAME Trace = No Trying to connect to the database using isql tool with such a configuration results the following error: $ isql -v TS username password [IM002][unixODBC][Driver Manager]Data source name not found, and no default driver specified [ISQL]ERROR: Could not SQLConnect

  Read the article

• What Hypervisors support non-homogenous clusters?

  - by edude05

  I've been using Citrx Xenserver for awhile on a few machines that don't support Hardware Virtualization as a test for various small servers. I recently have been experimenting with moving the PV Vms between machines but Xenserver gives me errors that roughly say I need to have homogenous hardware for this to work. Because of this I haven't been able to setup XenMotion or any of the nice features that come with server pooling in Xenserver. I'm considering moving away from XenServer, however I can't seem to find a Hypervisor that explicitly supports non-homogenous clusters. On a side note, we do have a few idenitally configured Dell 1950s that haven't had any VM solution setup on yet, so if we can find a solution that can allow us to move PVs to those as well that would be great. Non free solutions are OK as well. What hypervisor will allow this? Thanks!

  Read the article

• Cyrus: How Do I Configure saslauthd For Authentication?

  - by Nick

  I'm trying to get Cyrus IMAP (v 2.2 on Ubuntu 9.04) setup and working, but I'm having a bit of trouble getting the login working correctly. I've created a mailbox for my test user "nrahl": cm user/nrahl and then created a password: $ saslpasswd2 nrahl I'm attempting to connect to the mailbox using Thunderbird. I'm using the machine's LAN IP address as the host, and "nrahl" as the username. It connects to the server and prompts me for the password. When I enter it, I get "Login to server failed." in Thunderbird, and /var/log/mail.log shows: Apr 15 19:20:01 IMAP cyrus/imap[1930]: accepted connection Apr 15 19:20:09 IMAP cyrus/imap[1930]: badlogin: [192.168.5.21] plaintext nrahl SASL(-13): authentication failure: checkpass failed Part of /etc/imapd.conf with comments removed: sieveusehomedir: false sievedir: /var/spool/sieve #mailnotifier: zephyr #sievenotifier: zephyr #dracinterval: 0 #drachost: localhost hashimapspool: true allowplaintext: yes sasl_mech_list: PLAIN #allowapop: no #sasl_maximum_layer: 256 #loginrealms: example.com #virtdomains: userid #defaultdomain: sasl_pwcheck_method: saslauthd #sasl_auxprop_plugin: sasldb sasl_auto_transition: no UPDATE: When setting: sasl_pwcheck_method: alwaystrue in /etc/imapd.conf, login works correctly. So I'm assuming the issue is saslauthd related.

  Read the article

• Why does modx-based site start using different domains for some content?

  - by naxa

  situation I have a modx site on a VPS with multiple domain and subdomain names. The modx site should use what I call the 'primary' domain name's 'primary' subdomain, ie www.intendedname.tld . The problem is that as time pass, the site mysteriously starts using another subdomain for links to content like videos, images, and even pages and (internal) links. The other subdomains doesn't serve this content of course. If I clear the modx cache, the original state is restored. However, the problem comes back again later. The VPS has a domain registered and multiple A records pointing to the VPS's IP, as subdomains. There is the 'primary' whan which is intended to be used as the public content server, the other ones are like docs. and test., etc. On top of that, I have dynamic-dns service client installed from no-ip on the machine and a dynamic domain-name bound. It gives a completely different domain name. I originally used it for ssh login and to serve a completely different site. An nginx server is put into good use to do rewrite the different subdomains to the right places. edit The modx templates use Templates use <base href="[[++site_url]]" />. current attempt to fix The current 'solution' to the problem is to also use the rewrite to rewrite everything to the 'primary' domain and subdomain. In the nginx config file for the site, it utilizes (unsurprisingly) the rewrite directive to rewrite the unexpected server_name entries (ie. the other subdomains) in a server block dedicated to this task. So with this, the main site basically works (sort of) but this renders all the other functions (docs) useless. Before this rewrite was set, the 'solution' was to clear the modx cache on a regular basis. The original modx content is not getting corrupted, only the files in cache are. What can I do to find out what actual the problem is and fix it?

  Read the article

< Previous Page | 548 549 550 551 552 553 554 555 556 557 558 559  | Next Page >