Search Results

Search found 20904 results on 837 pages for 'disk performance'.

Page 554/837 | < Previous Page | 550 551 552 553 554 555 556 557 558 559 560 561  | Next Page >

• Super-silent (mid tower) case and fan combo

  - by Dennis G.

  I want to build a HTPC for music/video/blu-ray playback (no gaming). I don't need an expensive HTPC case but just want to go with a standard medium tower case. However, I want it to be super silent so it doesn't make any annoying fan/disk noises when I watch movies. Ideally, it shouldn't make any noticeable noise at all. I understand that choosing a board, CPU and graphic card that run cool and don't consume a lot of power is important for designing a quiet machine, and I think I got that covered. However, there are so many choices in regards to cases, fans and power supplies that it's hard to get started. What are your recommendations for a case/fan (cpu+case)/power supply combination that run absolutely silent and can cool a standard Intel system with a low-power (possibly passively cooled) graphic card? I'm usually a fan of Antec cases, would an Antec Mini P180 be a good starting point? If so, which case fans, CPU fan and power supply would you recommend?

  Read the article

• VirtualBox: Host OS processor is spiked while guest OS virtual processor is idle?

  - by Greg Mattes

  I'm running Windows XP 32-bit on Windows Vista 64-bit with VirtualBox 3.0.6. Whenever I run the XP VM, Vista (host) reports 100% cpu utilization even though XP (guest) reports between 1-5% cpu utilization. The host box has 2 GB of physical RAM. The guest/vm is configured with 512 MB. The host box has a 64-bit AMD processor. No apps (other than VirtualBox) are running on either host, they're just idling. Any guesses as to why the host processor is spiked? I've enabled various advanced features for the XP guest in the hopes of having better performance: Settings → System → Motherboard: Enable IO APIC Settings → System → Processor: Enable PAE/NX Settings → System → Acceleration: Enable VT-x/AMD-V and Enable Nesting Paging

  Read the article

• Mac OSX Server: svn via ssh command line and encrypted passwords.

  - by Ben Clayton

  Hi all. When I log into our mac mini server running OSX 10.6 via ssh and use svn I get the message: ATTENTION! Your password for authentication realm: can only be stored to disk unencrypted! You are advised to configure your system so that Subversion can store passwords encrypted, if possible. See the documentation for details. You can avoid future appearances of this warning by setting the value of the 'store-plaintext-passwords' option to either 'yes' or 'no' in '/Users/xxxxxxxx/.subversion/servers'. I dont' want to store the password unencrypted though. I've found some details on how to use GNOME keychain in linux to sort this, but nothing on how to use macosx's keychain. Anyone got any ideas? Thanks a lot!

  Read the article

• video streaming infrastructure advice

  - by Alchemical

  We would like to set-up a live video-chat web site and are looking for basic recomendations for software and hardware set-up. Most streams will be broadcast live from a single person with a web cam, etc., and viewed by typically 1-10 people, although there could be up to 100+ viewers on the high side. Audio and video do not have to be super-high quality, but do need to be "good enough". The main point is to convey the basic info in the video (and audio). If occasionally the frame-rate drops low and then goes back to normal fairly soon, we could live with that. Budget is an issue, so we are in general looking for a lower cost solution that will give us most of what we need in temers of performance and quality. We are looking at Peer1 for co-lo. The rest of our web site will be .Net / Windows platform. We are open to looking at any platform for the best streaming solution, although our technical expertise is currently more on the Windows side.

  Read the article

• Cheap windows shared hosting service

  - by Elangovan

  Hi I have recently purchased a domain from go daddy, now I am looking for a cheap windows hosting. Following are my requirements Shared Windows hosting Should be cheap in price Should have at least one SQL server Db and one mysql db. Should support atleast asp.net 3.5 and php Will be good if it has support for asp.net mvc (no problem even if it is not available also) Should be able to install third party blog sites. Bandwidth, total space and performance are not very important. Silverlight is also an added advantage (no problem even if it is not available also). There should be no advertisement or banner added by the hosting company in the site. Should have support for subdomains

  Read the article

• Creating a filesystem on a file in linux for software development purposes

  - by David

  This question originally start at Superuser.com http://superuser.com/questions/130032/available-filesystems-for-linux-that-are-case-insensitive Summary: My client has a PHP web application that was written and is served from a Windows environments. Unfortunately the past developer didn't obey naming conventions so file includes are of the form "/file/At/SomethingHere.php" when on disk the path is actually "/File/at/Somethinghere.php". I do not want to use Windows for development but the filesystems I use (ext2, ext3 ) are case sensitive. I think the solution will be to create a filesystem like FAT 32 or similar, but I am somewhat clueless how to accomplish that. Starting to read up on DD and fdisk to figure out if those are the correct tools I will need.

  Read the article

• UNIX install quota in ubuntu ?

  - by user52085

  I am new to UNIX and can't figure out how to use the 'quota' command to see my disk usages. So I install “quota” using the following command sudo apt-get install quota But when I type in the command quota -v or anything similar, it doesn’t show anything. According to most website online (http://acs.ucsd.edu/students/quota.shtml#check-remove) , it suppose to show me all the quota limitation when I type in quota -v. can you please tell me how can I make it work or if I am doing something wrong here. your help is greatly appreciated. Thanks.

  Read the article

• Terminal Services - MS Access Frequently "Not Responding"

  - by jonfhancock

  Exposition: We use a program built in MS Access that I serve via Terminal Services. I just installed a new TS Server with a Quad Core 2.6GHz Xeon, 8GB RAM, and 4 SATA drives in a RAID 0. In installed Server 2008 R2 (64bit obviously). It's only role is TS. The problem: With just a few sessions (under 10), I start getting frequent Not Responding messages in each session. When it happens, the users aren't doing anything particularly taxing, just form navigation and simple insert queries. I can live with some stalls, but it is visually jarring in WS08 because the screen goes gray, and it presents a dialog offering to wait or close with some other options. Questions: Any suggestions for improving performance and reducing hangs? Is it possible to disable the dialog (always wait) and screen graying?

  Read the article

• how to pipe data to sftp connection?

  - by JMW

  ftp supports the put "|..." "remote-file.name" command to pipe data to an ftp connection. Is there something similar available for sftp? In sftp i get the following error: sftp 'jmw@backupsrv:/uploads' sftp> put "| tar -cx /storage" "backup-2012-06-19--17-51.tgz" stat | tar -cv /storage: No such file or directory as above the sftp client doesn't obviously execute the command. i want to use the pipe command to directly redirect the file stream to sftp. (because there is not enough space left to create a backup file on the same disk before uploading it to sftp server.)

  Read the article

• Drivers for Quick Cam pro 9000 on Windows 7

  - by runaros

  I have a Logitect Quick Cam Pro 9000 that I want to install on my Windows 7 installation. The user manual specifies that I have to install the software before I install the camera. But my experience is that software from hardware vendors tend to decrease computer performance, so I was wondering if this camera will work by only plugging it in and letting Windows 7 find and install the drivers for it. I could've just tried installing it of course, but again, hardware vendors are notorius for fucking up things, and I wouldn't want to make it impossible to install the camera by doing things in the wrong order, hence the question here on SuperUser because I assume somebody is more knowledgeable than me on this subject.

  Read the article

• Will new Acer Revo (with Atom 330) be fast enough to be MythTV client/server?

  - by vava

  As a geek I really like Atom CPUs but can't find a reason to buy one yet :( Although I was thinking about making my own DVR with NAS and media center functionality. Unfortunately, even today's Acer Revo, built on ION platform is not fast enough for streaming Full HD videos. So what do you think, will new two core CPU make it better, will it be able to show Full HD videos, store them to disk and transfer something over the network at the same time? Will it be able to scale videos from Hulu and YouTube to fullscreen?

  Read the article

• Does Ubuntu 12.04.1 come with everything I need for using virtual servers and are the tools efficient?

  - by orokusaki

  I noticed that Ubuntu 12.04.1 comes with Xen, OpenStack, KVM and other virtualization-related tools. I have used VMWare in the past. If I was to use Xen for visualization, would I see considerable performance lost, since Xen is run on the host OS? Is it even run on the host OS, or is it like VMWare where it's installed below any Linux OS on the machine (embedded, I guess is the word)? Do you have any recommendations on what sort of set up to use with these built-in tools? I have 2 physical servers, side-by-side. Each will need a VM used for Postgres and a VM used as an app server. One will be a failover for the other.

  Read the article

• application monitoring tools

  - by Shachar

  we're an ISV about to deploy our SaaS application over the internet to our end users, and are currently looking for an application monitoring solution. In addition to monitoring the usual OS-level suspects (I/O, disk space, logs, CPU, RAM, swapping, etc.), we're also looking to monitor, alert and report on internal application events, conditions, and counters (think queue size for internal service, or latency of a service we're getting from a third party via custom APIs). We're started looking at Nagios, Zenoss, etc., but found out those do only low-level stuff, and are currently looking at MOM and ManageEngine. Still, they are far from being an custom app monitoring tool. So - do you have anything to suggest?

  Read the article

• How to Shrink/Reset File stderr1 on a SAP System?

  - by Techboy

  I have a file called stderr1 in the work directory of several of the SAP servers in my production cluster. It has grown to around 19GB's to fill the hard disk on each server. I have deleted all trace files and WP files from within transaction SM50 but that hasn't deleted it (or re-named it to .old). If I try to rename or delete it manually, it says I can't because the file is in use. Please can you tell me how I can delete or shrink the stderr1 file?

  Read the article

• Can't figure out why hard drive is full [closed]

  - by Belgin Fish

  Possible Duplicate: How do I find out what is using up all the space on my / partition? No Free disk space so I have 2 hard drives in my server, one main one that is 10gb and then a separate one that is 2tb I'm storing all the files on the second one and the df -h output looks like this Filesystem Size Used Avail Use% Mounted on /dev/sda2 9.2G 8.8G 0 100% / tmpfs 1.5G 0 1.5G 0% /lib/init/rw udev 1.5G 148K 1.5G 1% /dev tmpfs 1.5G 0 1.5G 0% /dev/shm /dev/sda4 1.8T 747G 981G 44% /home /dev/sda4 1.8T 747G 981G 44% /usr/lib/cgi-bin I just can't figure out why the first one is full when all the files are being stored in the /usr/lib/cgi-bin I'm running debian I can't seem to find any files that would take up 8.8gb that arn't on the second hard drive :S Thanks!

  Read the article

• Problems with Xen installation

  - by Rodnower

  Hello, I have CentOS 5.4 installed. Now I'm trying to install Xen with out connecting to Internet (I have any driver for modem, so I search on Inernet only from Windows). All I have are 7 installation disks. First I done was to find kind of some add/remove programs wizard but it needed connection to Inernet. Second I try was to find Xen rpm on all disks and install it. But I fell on some dependency of some dependency. Third I attempted was to boot from first disk and do upgrade, but also it was unsuccessfully... So my question is: is there some way to install Xen from CentOS installation disks with out network? Thank you for ahead.

  Read the article

• XPP-32 over W7-64 on music production laptop

  - by quarlo

  I need to upgrade my laptop and need high performance for music production (recording and mixing). My audio interface manufacturer seems to be unable to successfully convert their drivers to 64-bit. I do not trust a virtual machine to handle real-time audio recording at low enough latency so ... I would like to install XP Pro 32-bit on a separate partition and dual boot since most of the machines that can handle this application now ship with Windows 7 64-bit flavors. I'd like to transit to 64-bit over time assuming M-Audio does eventually get a handle on 64-bit drivers, but really need to ensure that I can stay at 32-bit for now. Does anyone have any experience with this or something similar?

  Read the article

• Remove Write Protection from USB

  - by Vasile Marian Falama?

  My flash USB is write protected and I've tried every possible methods I've encountered over the internet, to get rid of this. Accessing the usb is not working. Format from my computer, is not working. Clear attributes with DiskPart is not working (can't be cleaned, Current Read-only State is Yes but Readonly is set to false... With Disk Management, I can't delete the partition... Is there any other method... With a specific software or somehow? Edit : I tried this on Windows 8.1.

  Read the article

• reiserfsck --rebuild-tree failed: Not enough allocable blocks

  - by mojo

  I have a reiserfs volume that required a --rebuild-tree, but is currently failing to complete when I pass it --rebuild-tree. Here is the output that I receive when running it: reiserfsck 3.6.19 (2003 www.namesys.com) # reiserfsck --rebuild-tree started at Mon Oct 26 13:22:16 2009 # Pass 0: # Pass 0 The whole partition (7864320 blocks) is to be scanned Skipping 8450 blocks (super block, journal, bitmaps) 7855870 blocks will be read 0%....20%....40%....60%....80%....100% left 0, 9408 /sec 287884 directory entries were hashed with "r5" hash. "r5" hash is selected Flushing..finished Read blocks (but not data blocks) 7855870 Leaves among those 6105606 Objectids found 287892 Pass 1 (will try to insert 6105606 leaves): # Pass 1 Looking for allocable blocks .. finished 0%....20%....40%....60%....80%....Not enough allocable blocks, checking bitmap...there are 1 allocable blocks, btw out of disk space Aborted I can't mount it, and I can't fsck it. I've tried extending the volume, but that hasn't helped either.

  Read the article

• Experience with AMCC 3ware 9650se raid cards? Ours seems dead

  - by antiduh

  We have a 8-port 3ware 9650se raid card for our main disk array. We had to bring the server down for a pending power outage, and when we turned the machine back on, the raid card never started. This card has been in service for a couple years without problems, and was working up until the shutdown. Now, when we turn the machine on, the bios option rom that normally kicks in before the bootloader doesn't show up, none of the drives start, and when the OS tries to access the device, it just times out. The firmware on it has been upgraded in the past, so it's possible we've hit some sort of firmware bug. We're using it in a Silicon Mechanics R272 machine with gentoo for the OS. The OS eventually boots, but alas, without the card. We've ordered a new one, but I'm worried that if we replace the card it won't recognize the existing array. Has anybody performed a card swap before? Any help would be greatly appreciated.

  Read the article

• OSX Time Machine: deletion of backup folders

  - by jml

  I saw this question and was hoping that someone could expand upon the chosen answer (which I understood): Can you sudo mv Time Machine backup files as sudo from the trash to their original locations? I have tried doing this as root to no avail (operation not permitted). If not, can you successfully rm them via the trash via the terminal, faster than what the endless 'preparing to empty the trash' dialog suggests, and If you get the files back out of the trash can you tell if they are intact via disk utility (and how) Can you force indexing on a Time Machine drive in the same way that you would a normal drive to rebuild the TM index? I realize that a single answer could clarify all of the above, but I wanted to include details to be clear on what I am asking. Thanks for any help.

  Read the article

• Best way to duplicate databases nightly?

  - by Margaret

  Hey all We just got two new servers, that are running Windows Server 2008. The intent is to make the machines pretty much identical, copying the content of the master to the slave on a nightly basis, so that if anything fails, the second copy can stand in immediately. It doesn't need to be up-to-the-minute mirroring, though I suppose that wouldn't hurt if performance is not affected. The two machines will, amongst other things, each be running an instance of SQL Server 2008. The aim is to duplicate the databases on the master down to the slave on a nightly basis. Unless I'm misunderstanding, the slave databases in mirrored databases require the primary to be present to work correctly; I'm hoping for some solution where we have a second machine that can be up and running with minimal downtime if the first one falls over. Am I misunderstanding mirroring? Is that the best way to do things, or should I use some other mechanism? If so, what?

  Read the article

• Error - installing Adobe Flash Player: "The installer you are trying to use is corrupted or incomple

  - by imageree

  I am using Windows 7 64 bits and Chrome browser. When I try to install Adobe Flash player I get this error: "NSIS Error The installer you are trying to use is corrupted or incomplete. This could be the result of a damaged disk, a failed download or a virus. You may want to contact the author of this installer to obtain a new copy. It may be possible to skip this check using the /NCRC command line switch (NOT RECOMMENDED)." Any idea what is the problem?

  Read the article

• Mac Book Pro SSD

  - by LiamB

  I have a Mac Book Pro (I7 and 8 Gig Ram). I'm a developer - do a fair amount of .net via VMware but lots of Ruby and NodeJs on the Mac. I'm looking to extract some more performance and i think a SSD might be a good option. So I have 2 questions, Can I straight up replace the drive thats in there with a SSD or will this cause me problems? I have files on there as well as apps. What are my options in terms of available hardware.

  Read the article

• What desktop chipsets support AMD's Rapid Virtualization Indexing?

  - by netvope

  Rapid Virtualization Indexing (RVI) is a hardware virtualization feature that can potentially give significant performance improvement. Intel's equivalent is Extended Page Tables. See http://en.wikipedia.org/wiki/Rapid_Virtualization_Indexing for more details. My question is: Does RVI require motherboard or chipset support? If yes, what desktop chipsets support it? I've ordered a Phenom II CPU (which supports RVI) but I haven't bought the motherboard. I'll install XenServer or VMware ESXi (which both support RVI) on the new computer.

  Read the article

< Previous Page | 550 551 552 553 554 555 556 557 558 559 560 561  | Next Page >