Search Results

Search found 15670 results on 627 pages for 'multi level'.

Page 554/627 | < Previous Page | 550 551 552 553 554 555 556 557 558 559 560 561  | Next Page >

• What's wrong with my wireless?

  - by dazzle

  I am having issues with my wireless connection. My connection is constantly disconnecting, then attempting to reconnect, reconnecting momentarily, then disconnecting etc. on times scales that range from seconds to minutes. In the meantime, needless to say I'm having significant packet loss. I'm running Ubuntu 14.04 64bit, updated and upgraded to today. Here is my card and driver: delta@sager:~$ lspci -vq | grep -i wireless -B 1 -A 5 04:00.0 Network controller: Intel Corporation Wireless 7260 (rev 73) Subsystem: Intel Corporation Dual Band Wireless-AC 7260 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at f7d00000 (64-bit, non-prefetchable) [size=8K] Capabilities: Kernel driver in use: iwlwifi Here is my kernel: delta@sager:~$ uname -r 3.13.0-34-generic None of the other machines on my home network are having these issues. Windows Vista is networking without issue for goodness sake ;-) Here is a small clipping from the output of dmesg. As you can see, I am getting a cfg80211 message of some sort over and over again (FYI, I've replaced my MAC address with a series of dashes, so anytime there is a ---------------, that was where the MAC address was: [ 1881.739161] wlan1: authenticate with --------------- [ 1881.741561] wlan1: send auth to --------------- (try 1/3) [ 1881.743440] wlan1: authenticated [ 1881.746027] wlan1: associate with --------------- (try 1/3) [ 1881.749244] wlan1: RX AssocResp from --------------- (capab=0x411 status=0 aid=4) [ 1881.754727] wlan1: associated [ 1881.754827] cfg80211: Calling CRDA for country: US [ 1881.761552] cfg80211: Regulatory domain changed to country: US [ 1881.761559] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1881.761564] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1881.761568] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 1881.761571] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761574] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761577] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761580] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 1881.761584] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 1882.391038] cfg80211: Calling CRDA to update world regulatory domain [ 1882.396254] cfg80211: World regulatory domain updated: [ 1882.396260] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1882.396265] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396268] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396271] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1882.396274] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396277] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.148252] wlan1: authenticate with --------------- [ 1886.150005] wlan1: send auth to --------------- (try 1/3) [ 1886.151807] wlan1: authenticated [ 1886.154847] wlan1: associate with --------------- (try 1/3) [ 1886.158147] wlan1: RX AssocResp from --------------- (capab=0x411 status=0 aid=4) [ 1886.163464] wlan1: associated [ 1886.163520] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by --------------- [ 1886.163588] cfg80211: Calling CRDA for country: US [ 1886.170500] cfg80211: Regulatory domain changed to country: US [ 1886.170508] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1886.170513] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1886.170517] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 1886.170520] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170523] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170526] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170529] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 1886.170533] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 1887.200197] cfg80211: Calling CRDA to update world regulatory domain [ 1887.203655] cfg80211: World regulatory domain updated: [ 1887.203659] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1887.203662] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203664] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203666] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1887.203668] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203670] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) I've poked around on AskUbuntu, and have not found any adequate solutions; have also found similar threads that were left unanswered. Any advice/experience/threads I might be able to pull on would be greatly appreciated. In your opinion, is this a kernel issue, hardware issue, etc.? Thanks in advance. EDIT: chili, here's the output of iwconfig: delta@sager:~$ iwconfig wlan1 IEEE 802.11abg ESSID:"LANbeforetime" Mode:Managed Frequency:2.412 GHz Access Point: ----------- Bit Rate=48 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=44/70 Signal level=-66 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:80 Missed beacon:0 eth0 no wireless extensions. lo no wireless extensions.

  Read the article

• Documentation and Test Assertions in Databases

  - by Phil Factor

  When I first worked with Sybase/SQL Server, we thought our databases were impressively large but they were, by today’s standards, pathetically small. We had one script to build the whole database. Every script I ever read was richly annotated; it was more like reading a document. Every table had a comment block, and every line would be commented too. At the end of each routine (e.g. procedure) was a quick integration test, or series of test assertions, to check that nothing in the build was broken. We simply ran the build script, stored in the Version Control System, and it pulled everything together in a logical sequence that not only created the database objects but pulled in the static data. This worked fine at the scale we had. The advantage was that one could, by reading the source code, reach a rapid understanding of how the database worked and how one could interface with it. The problem was that it was a system that meant that only one developer at the time could work on the database. It was very easy for a developer to execute accidentally the entire build script rather than the selected section on which he or she was working, thereby cleansing the database of everyone else’s work-in-progress and data. It soon became the fashion to work at the object level, so that programmers could check out individual views, tables, functions, constraints and rules and work on them independently. It was then that I noticed the trend to generate the source for the VCS retrospectively from the development server. Tables were worst affected. You can, of course, add or delete a table’s columns and constraints retrospectively, which means that the existing source no longer represents the current object. If, after your development work, you generate the source from the live table, then you get no block or line comments, and the source script is sprinkled with silly square-brackets and other confetti, thereby rendering it visually indigestible. Routines, too, were affected. In our system, every routine had a directly attached string of unit-tests. A retro-generated routine has no unit-tests or test assertions. Yes, one can still commit our test code to the VCS but it’s a separate module and teams end up running the whole suite of tests for every individual change, rather than just the tests for that routine, which doesn’t scale for database testing. With Extended properties, one can get the best of both worlds, and even use them to put blame, praise or annotations into your VCS. It requires a lot of work, though, particularly the script to generate the table. The problem is that there are no conventional names beyond ‘MS_Description’ for the special use of extended properties. This makes it difficult to do splendid things such ensuring the integrity of the build by running a suite of tests that are actually stored in extended properties within the database and therefore the VCS. We have lost the readability of database source code over the years, and largely jettisoned the use of test assertions as part of the database build. This is not unexpected in view of the increasing complexity of the structure of databases and number of programmers working on them. There must, surely, be a way of getting them back, but I sometimes wonder if I’m one of very few who miss them.

  Read the article

• Any tips on getting hired as a software project manager straight out of college?

  - by MHarrison

  I graduated with a BS in compsci last September, and I've been trying (unsuccessfully) to find a job as a project manager ever since. I fell in love with software engineering (the formal practice behind it all, not just coding) in school, and I've dedicated the last 3-4 years of my life to learning everything I can about project management and gaining experience. I've managed several projects (with teams around 12 people) while in school, and I worked with my university's software engineering research lab. My résumé is also decent - I worked as a programmer before I went to school (I'm 27 now), and I did Google Summer of Code for 3 summers. I also have general "people management" experience via working as the photo editor for my university's newspaper for 2 years. My first problem with the job hunt is not getting enough interviews. I use careers.stackoverflow.com, which is awesome because I usually get contacted by non-HR people who know what they're talking about, but there's just not enough companies using it for me to get interviews on a regular basis. I've also tried sites like monster.com, and in a fit of desperation, I sent out no less than 60 applications to project management positions. I've gotten 3 automated rejection letters and that's it. At least careers.stackoverflow gets me a phone interview with 8/10 places I apply to. But the main (and extremely frustrating) problem is the matter of experience. I've successfully managed projects from start to finish (in my software engineering classes we had real customers come in with a real software need and we built it for them), but I've never had to deal with budgets and money (I know this is why HR people immediately turn me away). Most of these positions require 5+ years PM experience, and I've seen absurd things like 12+ years required. Interviews are also maddening. I've had so many places who absolutely loved me and I made it to the final round of interviews, and I left thinking things went extremely well and they'd consider me. However, when I check in with them a week later, they tell me "We really liked you and your qualifications are excellent, but we're hoping to find someone with more experience." The bad interviews I can understand - like the PM position that would have had me managing developers both locally and overseas - I had 3 interviews with them and the ENTIRE interview process was them asking me CS brainteasers and having me waste time on things like writing quicksort on paper or writing binary search trees. Even when I tried steering the discussion towards more relevant PM stuff, they gave me some vague generic replies and went back to the "We want to be Google/MS" crap. But when I have a GOOD interview, they say my "qualifications are excellent" but they want "more experience"...that makes me want to tear my hair out. What else can I DO? While I'm aiming for technically-involved PM positions (not just crunching budget numbers), I really don't want a straight development job because I like creating software from the very high-level vs. spending a lot of time debugging memory leaks. In fact, I can't even GET development positions that I'm qualified for because I make the mistake of telling them that my future career goals are as PM (which usually results in them saying something like "Well we already have PMs and this position isn't really set up to get you there." - which I take to mean "No, that's my job, stay away.") My apologies on the long rant, but I'm seriously hellbent on getting hired as a PM since it's both my career goal and the passion that keeps me awake at night. Any suggestions on what the heck else I can do? I'm currently writing a blog where I talk about my philosophies about software engineering, and I'm writing up specs for an iOS app which I will design, code, and show employers, but this takes an awful lot of time that I don't have.

  Read the article

• WiX, MSDeploy and an appealing configuration/deployment paradigm

  - by alexhildyard

  I do a lot of application and server configuration; I've done this for many years and have tended to view the complexity of this strictly in terms of the complexity of the ultimate configuration to be deployed. For example, specific APIs aside, I would tend to regard installing a server certificate as a more complex activity than, say, copying a file or adding a Registry entry.My prejudice revolved around the idea of a sequential deployment script that not only had the explicit prescription to apply a specific server configuration, but also made the implicit presumption that the server in question was in a good known state. Scripts like this fail for hundreds of reasons -- the Default Website didn't exist; the application had already been deployed; the application had already been partially deployed and failed to rollback fully, and so on. And so the problem is that the more complex the configuration activity, the more scope for error in any individual part of that activity, and therefore the greater the chance the server in question will not end up at exactly the desired configuration level.Recently I was introduced to a completely different mindset, which, for want of a better turn of phrase, I will call the "make it so" mindset. It's extremely simple both to explain and to implement. In place of the head-down, imperative script you used to use, you substitute a set of checks -- much like exception handlers -- around each configuration activity, starting with a check of the current system state. Thus the configuration logic becomes: "IF these services aren't started then start them, and IF XYZ website doesn't exist then create it, and IF these shares don't exist then create them, and IF these shares aren't permissioned in some particular way, then permission them so." This works. Really well, in my experience. Scenario 1: You want to get a system into a good known state; it's already in a good known state; you quickly realise there is nothing to do.Scenario 2: You want to get the system into a good known state; your script is flawed or the system is bust; it cannot be put into that state. You know exactly where (at least part of) the problem is and why.Scenario 3: You want to get the system into a good known state; people are fiddling around with the system just now. That's fine. You do what you can, and later you come back and try it againScenario 4: No one wants to deploy anything; they want you to prove that the previous deployment was successful. So you re-run the deployment script with the "-WhatIf" flag. It reports that there was nothing to change. There's your proof.I mentioned two technologies in the title -- MSI and MSDeploy. I am thinking specifically of the conversation that took place here. Having worked with both technologies, I think Rob Mensching's response is appropriately nuanced, and in essence the difference is this: sometimes your target is either to achieve a specific new server state, or to rollback to a known good one. Then again, your target may be to configure what you can, and to understand what you can't. Implicitly MSDeploy's "rollback" is simply to redeploy the previous version, whereas a well-crafted MSI will actively put your system into that state without further intervention. Either way, if all goes well it will leave you with a system in one of two states, whereas MSDeploy could leave your system in one of many states. The key is that MSDeploy and MSI are complementary technologies; which suits you best depends as much on Operational guidance as your Configuration remit.What I wanted to say was that I have always been for atomic, transactional-based configuration, but having worked with the "make it so" paradigm, I have been favourably impressed by the actual results. I'm tempted to put a more technical post up on this in due course.

  Read the article

• PowerShell Script To Find Where SharePoint 2007 Features Are Activated

  - by Brian T. Jackett

  Recently I posted a script to find where SharePoint 2010 Features Are Activated.  I built the original version to use SharePoint 2010 PowerShell commandlets as that saved me a number of steps for filtering and gathering features at each level.  If there was ever demand for a 2007 version I could modify the script to handle that by using the object model instead of commandlets.  Just the other week a fellow SharePoint PFE Jason Gallicchio had a customer asking about a version for SharePoint 2007.  With a little bit of work I was able to convert the script to work against SharePoint 2007.   Solution    Below is the converted script that works against a SharePoint 2007 farm.  Note: There appears to be a bug with the 2007 version that does not give accurate results against a SharePoint 2010 farm.  I ran the 2007 version against a 2010 farm and got fewer results than my 2010 version of the script.  Discussing with some fellow PFEs I think the discrepancy may be due to sandboxed features, a new concept in SharePoint 2010.  I have not had enough time to test or confirm.  For the time being only use the 2007 version script against SharePoint 2007 farms and the 2010 version against SharePoint 2010 farms.    Note: This script is not optimized for medium to large farms.  In my testing it took 1-3 minutes to recurse through my demo environment.  This script is provided as-is with no warranty.  Run this in a smaller dev / test environment first. 001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 016 017 018 019 020 021 022 023 024 025 026 027 028 029 030 031 032 033 034 035 036 037 038 039 040 041 042 043 044 045 046 047 048 049 050 051 052 053 054 055 056 057 058 059 060 061 062 063 064 065 066 067 068 069 070 function Get-SPFeatureActivated { # see full script for help info, removed for formatting [CmdletBinding()] param(     [Parameter(position = 1, valueFromPipeline=$true)]     [string]     $Identity )#end param     Begin     {         # load SharePoint assembly to access object model         [void][System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint")             # declare empty array to hold results. Will add custom member for Url to show where activated at on objects returned from Get-SPFeature.         $results = @()                 $params = @{}     }     Process     {         if([string]::IsNullOrEmpty($Identity) -eq $false)         {             $params = @{Identity = $Identity}         }                 # create hashtable of farm features to lookup definition ids later         $farm = [Microsoft.SharePoint.Administration.SPFarm]::Local                         # check farm features         $results += ($farm.FeatureDefinitions | Where-Object {$_.Scope -eq "Farm"} | Where-Object {[string]::IsNullOrEmpty($Identity) -or ($_.DisplayName -eq $Identity)} |                          % {Add-Member -InputObject $_ -MemberType noteproperty -Name Url -Value ([string]::Empty) -PassThru} |                          Select-Object -Property Scope, DisplayName, Id, Url)                 # check web application features         $contentWebAppServices = $farm.services | ? {$_.typename -like "Windows SharePoint Services Web Application"}                 foreach($webApp in $contentWebAppServices.WebApplications)         {             $results += ($webApp.Features | Select-Object -ExpandProperty Definition | Where-Object {[string]::IsNullOrEmpty($Identity) -or ($_.DisplayName -eq $Identity)} |                          % {Add-Member -InputObject $_ -MemberType noteproperty -Name Url -Value $webApp.GetResponseUri(0).AbsoluteUri -PassThru} |                          Select-Object -Property Scope, DisplayName, Id, Url)                         # check site collection features in current web app             foreach($site in ($webApp.Sites))             {                 $results += ($site.Features | Select-Object -ExpandProperty Definition | Where-Object {[string]::IsNullOrEmpty($Identity) -or ($_.DisplayName -eq $Identity)} |                                  % {Add-Member -InputObject $_ -MemberType noteproperty -Name Url -Value $site.Url -PassThru} |                                  Select-Object -Property Scope, DisplayName, Id, Url)                                 # check site features in current site collection                 foreach($web in ($site.AllWebs))                 {                     $results += ($web.Features | Select-Object -ExpandProperty Definition | Where-Object {[string]::IsNullOrEmpty($Identity) -or ($_.DisplayName -eq $Identity)} |                                      % {Add-Member -InputObject $_ -MemberType noteproperty -Name Url -Value $web.Url -PassThru} |                                      Select-Object -Property Scope, DisplayName, Id, Url)                                                        $web.Dispose()                 }                 $site.Dispose()             }         }     }     End     {         $results     } } #end Get-SPFeatureActivated Get-SPFeatureActivated   Conclusion    I have posted this script to the TechNet Script Repository (click here).  As always I appreciate any feedback on scripts.  If anyone is motivated to run this 2007 version script against a SharePoint 2010 to see if they find any differences in number of features reported versus what they get with the 2010 version script I’d love to hear from you.         -Frog Out

  Read the article

• Graphics trouble after resuming from hibernate or suspend

  - by Voyagerfan5761

  I have a Dell Inspiron 2650 (with NVidia graphics, using nouveau drivers) that I'm using to try out Ubuntu. It's all great, except that Hibernate and Suspend aren't usable. Yes, I know that questions about power-save issues are rampant in the Linux support universe, but it seems that every time I find a solution it's for a very specific hardware combination and doesn't apply to me. So anyway, here goes. When I resume from either power-saving mode, I'll get graphics problems anywhere on the range from a few scattered random-colored pixels that won't change; all the way to full-screen patterns that don't change as I move the mouse, hit keys on the keyboard, or even bring up the shutdown dialog using the power button. Those full-screen issues (which may involve stripes with random pixels, partial black screen, or both) always end in me forcing the machine to shut down by holding the power button. I haven't done much testing yet to determine what severity level is most commonly associated with each mode, but I do avoid using either power-save option because of these issues. I'll add info on my hardware as I can gather it (no home internet connection, and this laptop is tethered to my desk by a dead battery and casing degradation). Please feel free to request something specific in the question comments. Hardware Info See this hardinfo report for my system's hardware configuration. (No, my username is not "myuser"; I sanitized hardinfo's output before publishing it.) Screenshots These screenshots are from a relatively mild occurrence, which happened after the second hibernation I took that session. The first one worked great, though I used the wireless card and Firefox heavily between the two hibernation attempts. Take a look at what happened when I opened my home directory in Nautilus and scrolled it: See below for the situations I've tested so far. The real trouble comes when the machine resumes to an unusable state; in such cases I can't even unlock the screen or properly reboot, much less take a screenshot. I have a hunch that putting a CD in the drive will cause such major failures, and I will try that at some point; see related question. Situations Tested Maverick (10.10) Suspend Seems to suspend nicely with nothing running Seems to suspend nicely with flash drive plugged in On resume from suspend with no flash drive, Terminal and gedit running: Funky graphics on top of log output, then blank screen with pixelated cursor; no response to power button (normally will shutdown 60 seconds later) Hibernate Seems to hibernate nicely with nothing running Seems to hibernate nicely with a few apps (Terminal, Mouse preferences) running Seems to not hibernate when flash drive plugged in Seems to not hibernate when System Monitor is running Have encountered failed hibernation (after several hours and one successful hibernate/thaw cycle) with no external media connected and no programs running except normal background stuff Natty LiveCD (11.04_2010-12-22) When I tested it, Natty wouldn't stay logged in. It played part of the login sound and then [ OK ] appeared in the top right corner (white-on-black terminal text) for a few seconds. Then it kicked me back to the Unlock screen. It did that four times before I gave up and just tested suspend from the Unlock screen. Suspend Resumed to vertical gray and black lines 2px (?) wide, then shifted to vertical "jail bars" of black over a black screen with above-described random pixels and mouse pointer. No apparent response to input from mouse (clicking randomly). Keyboard and touchpad unrecognized.

  Read the article

• Perm SSIS Developer Urgently Required

  - by blakmk

    Job Role To provide dedicated data services support to the company, by designing, creating, maintaining and enhancing database objects, ensuring data quality, consistency and integrity. Migrating data from various sources to central SQL 2008 data warehouse will be the primary function. Migration of data from bespoke legacy database’s to SQL 2008 data warehouse. Understand key business requirements, Liaising with various aspects of the company. Create advanced transformations of data, with focus on data cleansing, redundant data and duplication. Creating complex business rules regarding data services, migration, Integrity and support (Best Practices). Experience ·         Minimum 3 year SSIS experience, in a project or BI Development role and involvement in at least 3 full ETL project life cycles, using the following methodologies and tools o    Excellent knowledge of ETL concepts including data migration & integrity, focusing on SSIS. o    Extensive experience with SQL 2005 products, SQL 2008 desirable. o    Working knowledge of SSRS and its integration with other BI products. o    Extensive knowledge of T-SQL, stored procedures, triggers (Table/Database), views, functions in particular coding and querying. o    Data cleansing and harmonisation. o    Understanding and knowledge of indexes, statistics and table structure. o    SQL Agent – Scheduling jobs, optimisation, multiple jobs, DTS. o    Troubleshoot, diagnose and tune database and physical server performance. o    Knowledge and understanding of locking, blocks, table and index design and SQL configuration. ·         Demonstrable ability to understand and analyse business processes. ·         Experience in creating business rules on best practices for data services. ·         Experience in working with, supporting and troubleshooting MS SQL servers running enterprise applications ·         Proven ability to work well within a team and liaise with other technical support staff such as networking administrators, system administrators and support engineers. ·         Ability to create formal documentation, work procedures, and service level agreements. ·         Ability to communicate technical issues at all levels including to a non technical audience. ·         Good working knowledge of MS Word, Excel, PowerPoint, Visio and Project.   Location Based in Crawley with possibility of some remote working Contact me for more info: http://sqlblogcasts.com/blogs/blakmk/contact.aspx      

  Read the article

• OPN Exchange General Sessions –Fowler, Kurian & More!

  - by Kristin Rose

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} With so much excitement about to take place at OPN Exchange @ OpenWorld, it’s hard to decide what to attend, where to go, who to meet and what to eat! Let us help you decide by first asking a question… How often do you get to choose between seven key Oracle Executives as they address the five biggest topics facing the industry today? After the Partner Keynote with Judson Althoff, join us for the OPN Exchange General Sessions: DATE: Sunday September 30th TIME: 3:30-4:30 pm LOCATION: Moscone South, Esplanade Level John Fowler & Tom LaRocca (Technology for Partners: Room 306): Learn how to grow your top and bottom line by selling Oracle on Oracle. Chris Leone (Applications for Partners: Room 303): Catch the partner-only value prop, selling secrets and competitive compares to win with the Fusions Applications product family. Angelo Pruscino & Sohan DeMel (Engineered Systems for Partners: Room 301): Get the secrets to selling and implementing Oracle’s transformational Engineered Systems products. You won’t want to miss the Oracle Database Appliance Unplugged demonstration! Sonny Singh (Industry Solutions: Room 302): Develop profitable practices answering the challenges faced by companies operating in discrete industries and the opportunity represented by Machine2Machine Java. Thomas Kurian (Cloud for Partnesr: Room 304): Today it is all about the Cloud. Oracle offers both traditional cloud infrastructure solutions, as well cloud platform and software services. Attend this session to learn more about Oracle’s Platform, Application, and Social cloud services. Put on your thinking caps because these speakers are ready to blow your mind with five tracks of exclusive content catered to you, our partners. Boom! The OPN Communication Team Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";}

  Read the article

• Caching factory design

  - by max

  I have a factory class XFactory that creates objects of class X. Instances of X are very large, so the main purpose of the factory is to cache them, as transparently to the client code as possible. Objects of class X are immutable, so the following code seems reasonable: # module xfactory.py import x class XFactory: _registry = {} def get_x(self, arg1, arg2, use_cache = True): if use_cache: hash_id = hash((arg1, arg2)) if hash_id in _registry: return _registry[hash_id] obj = x.X(arg1, arg2) _registry[hash_id] = obj return obj # module x.py class X: # ... Is it a good pattern? (I know it's not the actual Factory Pattern.) Is there anything I should change? Now, I find that sometimes I want to cache X objects to disk. I'll use pickle for that purpose, and store as values in the _registry the filenames of the pickled objects instead of references to the objects. Of course, _registry itself would have to be stored persistently (perhaps in a pickle file of its own, in a text file, in a database, or simply by giving pickle files the filenames that contain hash_id). Except now the validity of the cached object depends not only on the parameters passed to get_x(), but also on the version of the code that created these objects. Strictly speaking, even a memory-cached object could become invalid if someone modifies x.py or any of its dependencies, and reloads it while the program is running. So far I ignored this danger since it seems unlikely for my application. But I certainly cannot ignore it when my objects are cached to persistent storage. What can I do? I suppose I could make the hash_id more robust by calculating hash of a tuple that contains arguments arg1 and arg2, as well as the filename and last modified date for x.py and every module and data file that it (recursively) depends on. To help delete cache files that won't ever be useful again, I'd add to the _registry the unhashed representation of the modified dates for each record. But even this solution isn't 100% safe since theoretically someone might load a module dynamically, and I wouldn't know about it from statically analyzing the source code. If I go all out and assume every file in the project is a dependency, the mechanism will still break if some module grabs data from an external website, etc.). In addition, the frequency of changes in x.py and its dependencies is quite high, leading to heavy cache invalidation. Thus, I figured I might as well give up some safety, and only invalidate the cache only when there is an obvious mismatch. This means that class X would have a class-level cache validation identifier that should be changed whenever the developer believes a change happened that should invalidate the cache. (With multiple developers, a separate invalidation identifier is required for each.) This identifier is hashed along with arg1 and arg2 and becomes part of the hash keys stored in _registry. Since developers may forget to update the validation identifier or not realize that they invalidated existing cache, it would seem better to add another validation mechanism: class X can have a method that returns all the known "traits" of X. For instance, if X is a table, I might add the names of all the columns. The hash calculation will include the traits as well. I can write this code, but I am afraid that I'm missing something important; and I'm also wondering if perhaps there's a framework or package that can do all of this stuff already. Ideally, I'd like to combine in-memory and disk-based caching.

  Read the article

• Top 5 Reasons to Invest in Enterprise 2.0 Technologies

  - by kellsey.ruppel(at)oracle.com

  In 2010, Oracle's portal, content management, and collaboration solutions evolved rapidly, supported by increasingly deep integrations across Oracle Fusion Middleware and the entire Oracle stack. In light of these developments, we asked Vince Casarez, vice president of Enterprise 2.0 product management, for his top five reasons to invest in Enterprise 2.0 (E2.0) technologies--including real-world examples of businesses already realizing the benefits of next-generation E2.0 technologies. 1. Provide a modern user experience As E2.0 technologies gain widespread adoption, customers and employees expect intuitive Web experiences that are both interactive and community-based. By partnering with Oracle, Alcatel-Lucent Enterprise Group is already making that happen. With 76,000 employees and operations in more than 100 countries, the company wanted a streamlined, personalized user experience with more relevant content in fewer clicks. Working with Oracle, they created a global support portal that supports personalization and integration with Oracle Business Intelligence Enterprise Edition and Oracle E-Business Suite--and drives collaboration with tools such as wikis, blogs, and forums. Learn more about Alcatel-Lucent Enterprise Group's Global Support Portal in this Webcast. 2. Improve productivity and collaboration As E2.0 technologies mature, Oracle anticipates companies moving beyond the idea of simply creating yet another Facebook-like destination for its employees, and instead shaping work environments around specific business tasks. After rapid growth--both organic and through acquisition--construction and infrastructure services leader Balfour Beatty found itself with multiple homegrown intranet sites with very minimal content-sharing capabilities. Today, thanks to Oracle WebCenter Suite, Oracle WebCenter Spaces, Oracle WebCenter Services, and Oracle Universal Content Management, Balfour Beatty is benefiting from collaborative workspaces, a central place to use and work with documents, and unified search across content. 3. Leverage business processes and applications Modern portals are now able to integrate users, content, and business processes in unprecedented ways. To take advantage of these new possibilities, leading dairy provider Land O'Lakes has implemented a fully integrated ERP solution together with Oracle's ECM platform. As a result, Land O'Lakes has been able to achieve better information management and compliance, increased adoption rates for enterprise tools, and increased business process efficiency thanks to more effective information sharing and collaboration. 4. Enhance customer and supplier relationships Companies have begun to move beyond the idea that E2.0 simply means enabling customer reviews or embedding chat functionality. They are taking E2.0 to the next level and providing interactive experiences for their customers. For example, to enhance customer and supplier relationships, Wind River, a global leader in device software optimization, successfully partnered with Oracle to: Integrate ERP and ECM content to provide customers the latest and most relevant support information for products they own Enable customers to personalize their support experience and receive updates regarding patches, application notes, and other relevant content Enable discussions, wikis, and blogs for more efficient collaboration 5. Increase business visibility and responsiveness By strategically embedding collaboration and communication tools into specific business contexts, companies significantly increase visibility into changing business conditions--and can respond much more agilely. Texas A&M University System--one of the largest systems of higher education in the U.S.--partnered with Oracle to create a unified repository that would enable the retrieval of research and grant data from disparate systems via an Enterprise 2.0 user interface. By enabling researchers to customize their own portals with easy-to-use tools, they have also been able to significantly reduce their reliance on the IT department. Learn how other Oracle customers are leveraging Enterprise 2.0 technologies.

  Read the article

• Non-blocking I/O using Servlet 3.1: Scalable applications using Java EE 7 (TOTD #188)

  - by arungupta

  Servlet 3.0 allowed asynchronous request processing but only traditional I/O was permitted. This can restrict scalability of your applications. In a typical application, ServletInputStream is read in a while loop. public class TestServlet extends HttpServlet {    protected void doGet(HttpServletRequest request, HttpServletResponse response)         throws IOException, ServletException {     ServletInputStream input = request.getInputStream();       byte[] b = new byte[1024];       int len = -1;       while ((len = input.read(b)) != -1) {          . . .        }   }} If the incoming data is blocking or streamed slower than the server can read then the server thread is waiting for that data. The same can happen if the data is written to ServletOutputStream. This is resolved in Servet 3.1 (JSR 340, to be released as part Java EE 7) by adding event listeners - ReadListener and WriteListener interfaces. These are then registered using ServletInputStream.setReadListener and ServletOutputStream.setWriteListener. The listeners have callback methods that are invoked when the content is available to be read or can be written without blocking. The updated doGet in our case will look like: AsyncContext context = request.startAsync();ServletInputStream input = request.getInputStream();input.setReadListener(new MyReadListener(input, context)); Invoking setXXXListener methods indicate that non-blocking I/O is used instead of the traditional I/O. At most one ReadListener can be registered on ServletIntputStream and similarly at most one WriteListener can be registered on ServletOutputStream. ServletInputStream.isReady and ServletInputStream.isFinished are new methods to check the status of non-blocking I/O read. ServletOutputStream.canWrite is a new method to check if data can be written without blocking.  MyReadListener implementation looks like: @Overridepublic void onDataAvailable() { try { StringBuilder sb = new StringBuilder(); int len = -1; byte b[] = new byte[1024]; while (input.isReady() && (len = input.read(b)) != -1) { String data = new String(b, 0, len); System.out.println("--> " + data); } } catch (IOException ex) { Logger.getLogger(MyReadListener.class.getName()).log(Level.SEVERE, null, ex); }}@Overridepublic void onAllDataRead() { System.out.println("onAllDataRead"); context.complete();}@Overridepublic void onError(Throwable t) { t.printStackTrace(); context.complete();} This implementation has three callbacks: onDataAvailable callback method is called whenever data can be read without blocking onAllDataRead callback method is invoked data for the current request is completely read. onError callback is invoked if there is an error processing the request. Notice, context.complete() is called in onAllDataRead and onError to signal the completion of data read. For now, the first chunk of available data need to be read in the doGet or service method of the Servlet. Rest of the data can be read in a non-blocking way using ReadListener after that. This is going to get cleaned up where all data read can happen in ReadListener only. The sample explained above can be downloaded from here and works with GlassFish 4.0 build 64 and onwards. The slides and a complete re-run of What's new in Servlet 3.1: An Overview session at JavaOne is available here. Here are some more references for you: Java EE 7 Specification Status Servlet Specification Project JSR Expert Group Discussion Archive Servlet 3.1 Javadocs

  Read the article

• Where Twitter Stands Heading Into 2013

  - by Mike Stiles

  As Twitter continued throughout 2012 to be a stage on which global politics and culture played itself out, the company itself underwent some adjustments that give us a good indication of what users and brands can expect from the platform in 2013. The power of the network did anything but fade. Celebrities continued to use it to connect one-on-one. Even the Pope signed on this year. It continued to fuel revolutions. It played an exponentially large factor in this US Presidential election. And around the world, the freedom to speak was challenged as users were fired, sued, sometimes even jailed for their tweets. Expect more of the same in 2013, as Twitter has entrenched itself, for individuals, causes and brands, as the fastest, easiest, most efficient way to message the masses so some measure of impact can come from it. It’s changed everything, and it’s not finished. These fun facts reveal the position of strength with which Twitter enters 2013: It now generates a billion tweets every 2.5 days It has 500 million+ users The average Twitter user has tweeted 307 times 32% of everyone using the Internet uses Twitter It’s expected to bring in $540 million in ad revenue by 2014 11 new accounts are created every second High-level Executive Summary: people love it, people use it, and they’re going to keep loving and using it. Whether or not outside developers love it is a different matter. 2012 marked a shift from welcoming the third party support that played at least some role in Twitter being so warmly embraced, to discouraging anything that replicates what Twitter can do itself…or plans to do itself. It’s not the open playground it once was. Now Twitter must spend 2013 proving it can innovate in-house and keep us just as entranced. Likewise, Twitter is distancing itself from Facebook. Images from the #1 platform’s Instagram don’t work on Twitter anymore, and Twitter’s rolling out their own photo filter product. Where the two have lived in a “plenty of room for everybody” symbiosis up to now, 2013 could see the giants ramping up a full-on rivalry. Twitter is exhibiting a deliberate strategy. Updates have centered on more visually appealing search results, and making finding and sharing content easier. Deals have been cut with some media entities so their content stands out. CEO Dick Costolo has said tweets aren’t the attraction, they’re what leads you to content. Twitter aims to be a key distributor of media and info. Add the addition of former News Corp. President Peter Chernin to the board, and their hashtag landing page experience for events, and their media behemoth ambitions get pretty clear. There are challenges ahead and Costolo has also laid those out; entry into China, figuring out how to have Twitter deliver both comprehensive and relevant, targeted experiences, and the visualization of big data. What does this mean for corporations? They can expect a more media-rich evolution and growing emphases on imagery. They can expect more opportunities to create great media content and leverage Twitter for its distribution. And they can expect new ways to surface in searches. Are brands diving in? 56% of customer tweets to companies get completely and totally ignored. Ugh. A study Twitter recently conducted with Compete shows people who see tweets from retailers are more likely to buy a product. And, the more retailer tweets they see, the more likely they are to purchase on the retail site. As more of those tweets point to engaging media content from the brand, the results should get even better. Twitter appears ready for 2013. Enterprise brands have some work to do. @mikestilesPhoto Stuart Miles, freedigitalphotos.net

  Read the article

• ARTS Reference Model for Retail

  - by Sanjeev Sharma

  Consider a hypothetical scenario where you have been tasked to set up retail operations for a electronic goods or daily consumables or a luxury brand etc. It is very likely you will be faced with the following questions: What are the essential business capabilities that you must have in place?  What are the essential business activities under-pinning each of the business capabilities, identified in Step 1? What are the set of steps that you need to perform to execute each of the business activities, identified in Step 2? Answers to the above will drive your investments in software and hardware to enable the core retail operations. More importantly, the choices you make in responding to the above questions will several implications in the short-run and in the long-run. In the short-term, you will incur the time and cost of defining your technology requirements, procuring the software/hardware components and getting them up and running. In the long-term, as you grow in operations organically or through M&A, partnerships and franchiser business models  you will invariably need to make more technology investments to manage the greater complexity (scale and scope) of business operations.  "As new software applications, such as time & attendance, labor scheduling, and POS transactions, just to mention a few, are introduced into the store environment, it takes a disproportionate amount of time and effort to integrate them with existing store applications. These integration projects can add up to 50 percent to the time needed to implement a new software application and contribute significantly to the cost of the overall project, particularly if a systems integrator is called in. This has been the reality that all retailers have had to live with over the last two decades. The effect of the environment has not only been to increase costs, but also to limit retailers' ability to implement change and the speed with which they can do so." (excerpt taken from here) Now, one would think a lot of retailers would have already gone through the pain of finding answers to these questions, so why re-invent the wheel? Precisely so, a major effort began almost 17 years ago in the retail industry to make it less expensive and less difficult to deploy new technology in stores and at the retail enterprise level. This effort is called the Association for Retail Technology Standards (ARTS). Without standards such as those defined by ARTS, you would very likely end up experiencing the following: Increased Time and Cost due to resource wastage arising from re-inventing the wheel i.e. re-creating vanilla processes from scratch, and incurring, otherwise avoidable, mistakes and errors by ignoring experience of others Sub-optimal Process Efficiency due to narrow, isolated view of processes thereby ignoring process inter-dependencies i.e. optimizing parts but not the whole, and resulting in lack of transparency and inter-departmental finger-pointing Embracing ARTS standards as a blue-print for establishing or managing or streamlining your retail operations can benefit you in the following ways: Improved Time-to-Market from parity with industry best-practice processes e.g. ARTS, thus avoiding “reinventing the wheel” for common retail processes and focusing more on customizing processes for differentiations, and lowering integration complexity and risk with a standardized vocabulary for exchange between internal and external i.e. partner systems Lower Operating Costs by embracing the ARTS enterprise-wide process reference model for developing and streamlining retail operations holistically instead of a narrow, silo-ed view, and  procuring IT systems in compliance with ARTS thus avoiding IT budget marginalization While parity with industry standards such as ARTS business process model by itself does not create a differentiation, it does however provide a higher starting point for bridging the strategy-execution gap in setting up and improving retail operations.

  Read the article

• Public Sector FMW Customer Tech Day in Reston, Tuesday Oct 7th

  - by BPMWarrior

  Have your heard? There is another PS FMW Customer Tech Day scheduled in the Oracle Reston office!                                                                                          Fusion Middleware Customer Tech Day                                                          October 7, 2014                                   Please join Oracle & Sofbang on Tuesday October 7th for our second Public Sector Oracle Fusion Middleware (OFMW) Customer Tech Day in Reston.   This Tech Day is designed with you the customer in mind. Come learn and share with other customers. This event will be centered on Mobility, App Advantage, WebCenter, SOA, BPM, Security and FMWaaS.   Sofbang enables customers to create, integrate and run agile intelligent business applications leveraging Oracle Fusion Middleware. Based out of Chicago, IL, Sofbang is recognized as an Oracle Platinum level Partner in the Oracle Partner Network. For more information on Sofbang, please visit www.sofbang.com   To confirm your attendance at this Event or for more information, please email [email protected]                                              

  Read the article

• Essbase BSO Data Fragmentation

  - by Ann Donahue

  Essbase BSO Data Fragmentation Data fragmentation naturally occurs in Essbase Block Storage (BSO) databases where there are a lot of end user data updates, incremental data loads, many lock and send, and/or many calculations executed.  If an Essbase database starts to experience performance slow-downs, this is an indication that there may be too much fragmentation.  See Chapter 54 Improving Essbase Performance in the Essbase DBA Guide for more details on measuring and eliminating fragmentation: http://docs.oracle.com/cd/E17236_01/epm.1112/esb_dbag/daprcset.html Fragmentation is likely to occur in the following situations: Read/write databases that users are constantly updating data Databases that execute calculations around the clock Databases that frequently update and recalculate dense members Data loads that are poorly designed Databases that contain a significant number of Dynamic Calc and Store members Databases that use an isolation level of uncommitted access with commit block set to zero There are two types of data block fragmentation Free space tracking, which is measured using the Average Fragmentation Quotient statistic. Block order on disk, which is measured using the Average Cluster Ratio statistic. Average Fragmentation Quotient The Average Fragmentation Quotient ratio measures free space in a given database.  As you update and calculate data, empty spaces occur when a block can no longer fit in its original space and will either append at the end of the file or fit in another empty space that is large enough.  These empty spaces take up space in the .PAG files.  The higher the number the more empty spaces you have, therefore, the bigger the .PAG file and the longer it takes to traverse through the .PAG file to get to a particular record.  An Average Fragmentation Quotient value of 3.174765 means the database is 3% fragmented with free space. Average Cluster Ratio Average Cluster Ratio describes the order the blocks actually exist in the database. An Average Cluster Ratio number of 1 means all the blocks are ordered in the correct sequence in the order of the Outline.  As you load data and calculate data blocks, the sequence can start to be out of order.  This is because when you write to a block it may not be able to place back in the exact same spot in the database that it existed before.  The lower this number the more out of order it becomes and the more it affects performance.  An Average Cluster Ratio value of 1 means no fragmentation.  Any value lower than 1 i.e. 0.01032828 means the data blocks are getting further out of order from the outline order. Eliminating Data Block Fragmentation Both types of data block fragmentation can be removed by doing a dense restructure or export/clear/import of the data.  There are two types of dense restructure: 1. Implicit Restructures Implicit dense restructure happens when outline changes are done using EAS Outline Editor or Dimension Build. Essbase restructures create new .PAG files restructuring the data blocks in the .PAG files. When Essbase restructures the data blocks, it regenerates the index automatically so that index entries point to the new data blocks. Empty blocks are NOT removed with implicit restructures. 2. Explicit Restructures Explicit dense restructure happens when a manual initiation of the database restructure is executed. An explicit dense restructure is a full restructure which comprises of a dense restructure as outlined above plus the removal of empty blocks Empty Blocks vs. Fragmentation The existence of empty blocks is not considered fragmentation.  Empty blocks can be created through calc scripts or formulas.  An empty block will add to an existing database block count and will be included in the block counts of the database properties.  There are no statistics for empty blocks.  The only way to determine if empty blocks exist in an Essbase database is to record your current block count, export the entire database, clear the database then import the exported data.  If the block count decreased, the difference is the number of empty blocks that had existed in the database.

  Read the article

• Designing An ACL Based Permission System

  - by ryanzec

  I am trying to create a permissions system where everything is going to be stored in MySQL (or some database) and pulled using PHP for a project management system I am building.  I am right now trying to do it is an ACL kind of way.  There are a number key features I want to be able to support: 1.  Being able to assign permissions without being tied to a specific object. The reason for this is that I want to be able to selectively show/hide elements of the UI based on permissions at a point where I am not directly looking at a domain object instance.  For instance, a button to create a new project should only should only be shown to users that have the pm.project.create permission but obviously you can assign a create permission to an domain object instance (as it is already created). 2.  Not have to assign permissions for every single object. Obviously creating permissions entries for every single object (projects, tickets, comments, etc…) would become a nightmare to maintain so I want to have some level of permission inheritance. *3.  Be able to filter queries based on permissions. This would be a really nice to have but I am not sure if it is possible.  What I mean by this is say I have a page that list all projects.  I want the query that pulls all projects to incorporate the ACL so that it would not show projects that the current user does not have pm.project.read access to.  This would have to be incorporated into the main query as if it is a process that is done after that main query (which I know I could do) certain features like pagination become much more difficult. Right now this is my basic design for the tables: AclEntities id - the primary key key - the unique identifier for the domain object (usually the primary key of that object) parentId - the parent of the domain object (like the project object if this was a ticket object) aclDomainObjectId - metadata about the domain object AclDomainObjects id - primary key title - simple string to unique identify the domain object(ie. project, ticket, comment, etc…) fullyQualifiedClassName - the fully qualified class name for use in code (I am using namespaces) There would also be tables mapping AclEntities to Users and UserGroups. I also have this interface that all acl entity based object have to implement: IAclEntity getAclKey() - to the the unique key for this specific instance of the acl domain object (generally return the primary key or a concatenated string of a composite primary key) getAclTitle() - to get the unique title for the domain object (generally just returning a static string) getAclDisplayString() - get the string that represents this entity (generally one or more field on the object) getAclParentEntity() - get the parent acl entity object (or null if no parent) getAclEntity() - get the acl enitty object for this instance of the domain object (or null if one has not been created yet) hasPermission($permissionString, $user = null) - whether or not the user has the permission for this instance of the domain object static getFromAclEntityId($aclEntityId) - get a specific instance of the domain object from an acl entity id. Do any of these features I am looking for seems hard to support or are just way off base? Am I missing or not taking in account anything in my implementation? Is performance something I should keep in mind?

  Read the article

• Need help with chronic slow wifi connections

  - by mgeorge

  I have had chronic slow wifi connections on several networks for a while now, I think since my update to 12.04 when it came out. I have tried many of the tips and tricks already available out there in the forums with no luck (wicd, etc..). I want to see if any of you experts out there might be able to help me, and thanks in advance!! I use ubuntu 12.04 on a lenovo ideapad y650, and most networks I connect to lose the connection frequently or do not give appropriate bandwidth when I am connected. Here are some results of the usual go-to system checks: cat /etc/lsb-release; uname -a: DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.2 LTS" Linux mgeorge-lenovo 3.2.0-48-generic-pae #74-Ubuntu SMP Thu Jun 6 20:05:01 UTC 2013 i686 i686 i386 GNU/Linux lspci -nnk | grep -iA2 net: 04:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection [8086:4237] Subsystem: Intel Corporation WiFi Link 5100 AGN [8086:1211] Kernel driver in use: iwlwifi -- 08:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe [14e4:1698] (rev 10) Subsystem: Lenovo Device [17aa:3878] Kernel driver in use: tg3 lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 090c:7371 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) iwconfig: lo no wireless extensions. wlan0 IEEE 802.11abgn ESSID:"Dyno" Mode:Managed Frequency:2.412 GHz Access Point: CC:5D:4E:46:0A:93 Bit Rate=150 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=70/70 Signal level=-40 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:948 Invalid misc:728 Missed beacon:0 eth0 no wireless extensions. rfkill list all: 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_bluetooth: Bluetooth Soft blocked: yes Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no lsmod: Module Size Used by uvcvideo 67203 0 videodev 86588 1 uvcvideo nouveau 712674 3 ttm 65344 1 nouveau drm_kms_helper 45466 1 nouveau drm 197641 5 nouveau,ttm,drm_kms_helper i2c_algo_bit 13199 1 nouveau mxm_wmi 12893 1 nouveau wmi 18744 1 mxm_wmi joydev 17393 0 arc4 12473 2 snd_hda_codec_realtek 174313 1 snd_hda_codec_hdmi 31775 1 snd_hda_intel 32719 3 snd_hda_codec 109562 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec snd_pcm 80916 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13132 0 snd_rawmidi 25424 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi psmouse 86520 0 snd_seq 51592 2 snd_seq_midi,snd_seq_midi_event serio_raw 13027 0 snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq iwlwifi 366509 0 mac80211 436493 1 iwlwifi snd 62218 16 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,sn d_rawmidi,snd_seq,snd_timer,snd_seq_device ideapad_laptop 17890 0 sparse_keymap 13658 1 ideapad_laptop cfg80211 178877 2 iwlwifi,mac80211 ir_lirc_codec 12739 0 lirc_dev 18700 1 ir_lirc_codec soundcore 14635 1 snd snd_page_alloc 14108 2 snd_hda_intel,snd_pcm ir_mce_kbd_decoder 12681 0 ir_sony_decoder 12462 0 ir_jvc_decoder 12459 0 ir_rc6_decoder 12459 0 ir_rc5_decoder 12459 0 rc_rc6_mce 12454 0 ir_nec_decoder 12459 0 video 19115 1 nouveau ene_ir 18019 0 rc_core 21263 10 ir_lirc_codec,ir_mce_kbd_decoder,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,rc_rc6_mce,ir_nec_decoder,ene_ir bnep 17830 2 rfcomm 38139 0 parport_pc 32114 0 bluetooth 158479 10 bnep,rfcomm ppdev 12849 0 binfmt_misc 17292 1 mac_hid 13077 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp tg3 141414 0 nm-tool: NetworkManager Tool State: connected (global) - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: tg3 State: unavailable Default: no HW Address: 00:23:5A:CC:85:BD Capabilities: Carrier Detect: yes Wired Properties Carrier: off - Device: wlan0 [Dyno] -------------------------------------------------------- Type: 802.11 WiFi Driver: iwlwifi State: connected Default: yes HW Address: 00:22:FA:D0:94:CA Capabilities: Speed: 150 Mb/s Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points (* = current AP) *Dyno: Infra, CC:5D:4E:46:0A:93, Freq 2412 MHz, Rate 54 Mb/s, Strength 81 WPA2 IPv4 Settings: Address: 10.0.0.43 Prefix: 24 (255.255.255.0) Gateway: 10.0.0.1 DNS: 10.0.0.1

  Read the article

• What Color is your Jetpack ?

  - by JoshReuben

  I’m a programmer, Im approaching 40, and I’m fairly decent at my job – I’ll keep doing what I’m doing for as long as they let me!   So what are your career options if you know how to code? A Programmer could be ..   An Algorithm developer Pros Interesting High barriers of entry, potential for startup competitive factor Cons Do you have the skill, qualifications? What are working conditions n this mystery niche ? micro-focus An Academic Pros Low pressure Job security – or is this an illusion ? Cons Low Pay Need a PhD A Software Architect Pros: strategic, rather than tactical Setting technology platform and high level vision You say how it should work, others have to figure out why its not working the way its supposed to ! broad view – you are paid to learn (how do you con people into paying for you to learn ??) Cons: Glorified developer – more often than not! competitive – everyone wants to do it ! loose touch with underlying tech in tough times, first guy to get the axe ! A Software Engineer Pros: interesting, always more to learn fun I can do it Fallback Cons: Nothing new under the sun – been there, done that Dealing with poor requirements, deadlines, other peoples code, overtime C#, XAML, Web - Low barriers of entry –> à race to the bottom A Team leader Pros: Setting code standards and proposing technology choices Cons: Glorified developer – more often than not! Inspecting other peoples code and debugging the problems they cannot fix Dealing with mugbies and prima donas Responsible for QA of others A Project Manager Pros No need for debugging other peoples code Cons Low barrier of entry High pressure Responsible for QA of others Loosing touch with technology A lot of bullshit meetings Have to be an asshole A Product Manager Pros No need for debugging other peoples code Learning new skillset of sales and marketing Cons Travel (I'm a family man) May need to know the bs details of an uninteresting product things I want to work with: AI, algorithms, Numerical Computing, Mathematica, C++ AMP – unfortunately, the work here is few & far between. VS & TFS Extensibility, DSLs (Workflow , Lightswitch), Code Generation – one day, code will write code ! Unity3D, WebGL – fun, fun, fun ! Modern Web – Knockout, SignalR, MVC, Node.Js ??? (tentative – I'll wait until things stabilize as this area is undergoing a pre-Cambrian explosion) Things I don’t want to work with: (but will if I'm asked to !) C# – same old, same old – not learning anything new here Old code – blech ! Environment with code & fix mentality , ad hoc requirements, excessive overtime Pc support, System administration – even after 20 years, people still ask you to do this sometimes ! debugging – my skills are just not there yet Oracle Old tech: VB 6, XSLT, WinForms, Net 3.51 or less Old style Web dev Information Systems: ASP.NET webforms, Reporting services / crystal reports, SQL Server CRUD with manual data layer, XAML MVVM – variations of the same concept, ad nauseaum. Low barriers of entry –> race to the bottom.  Metro – an elegant API coupled to a horrendous UX – I'll wait for market penetration viability before investing further in this.   Conclusion So if you are in a slump, take heart: Programming is a great career choice compared to every other job !

  Read the article

• lvm disappeared after disc replacement on raid10

  - by user142295

  here my problem: I am running ubuntu 12.04 on a raid10 (4 disks), on top of which I installed an lvm with two volume groups (one for /, one for /home). The layout of the disks are as follows: Disk /dev/sda: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003f3b6 Device Boot Start End Blocks Id System /dev/sda1 * 63 481949 240943+ 83 Linux /dev/sda2 481950 2910640634 1455079342+ fd Linux raid autodetect /dev/sda3 2910640635 2930272064 9815715 82 Linux swap / Solaris Disk /dev/sdb: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00069785 Device Boot Start End Blocks Id System /dev/sdb1 63 2910158684 1455079311 fd Linux raid autodetect /dev/sdb2 2910158685 2930272064 10056690 82 Linux swap / Solaris Disk /dev/sdc: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdc1 63 2910158684 1455079311 fd Linux raid autodetect /dev/sdc2 2910158685 2930272064 10056690 82 Linux swap / Solaris Disk /dev/sdd: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000f14de Device Boot Start End Blocks Id System /dev/sdd1 63 2910158684 1455079311 fd Linux raid autodetect /dev/sdd2 2910158685 2930272064 10056690 82 Linux swap / Solaris The first disk (/dev/sda) contains the /boot partition on /dev/sda1. I use grub2 to boot the system off this partition. On top of this raid10 I installed two volume groups, one for /, one for /home. This system worked well, I even exchanged two disks during the last two years. It always worked. But not this time. For the first time, /dev/sda broke. I do not know if this is an issue – I know I would have struggled anyways to overcome the problem with /boot installed on that disk and grub2 installed on the mbr of /dev/sda. Anyways, I did what I always did: start knoppix fire up the raid sudo mdadm --examine -scan which returns ARRAY /dev/md127 UUID=0dbf4558:1a943464:132783e8:19cdff95 start it up sudo mdadm --assemble /dev/md127 fail the failing disk (smart event) sudo mdadm /dev/md127 --fail /dev/sda2 remove the failing disk sudo mdadm /dev/md127 --remove /dev/sda2 stop the raid sudo mdadm -S /dev/md127 take out the disk replace it with a new one create the same partitions as on the failling one add it to the raid sudo mdadm --assemble /dev/md127 sudo mdadm /dev/md127 --add /dev/sda2 wait 4 hours All looks fine: cat /proc/mdstat returns: Personalities : [raid10] md127 : active raid10 sda2[0] sdd1[3] sdc1[2] sdb1[1] 2910158464 blocks 64K chunks 2 near-copies [4/4] [UUUU] unused devices: <none> and sudo mdadm --detail /dev/md127 returns /dev/md127: Version : 0.90 Creation Time : Wed Jun 10 13:08:46 2009 Raid Level : raid10 Array Size : 2910158464 (2775.34 GiB 2980.00 GB) Used Dev Size : 1455079232 (1387.67 GiB 1490.00 GB) Raid Devices : 4 Total Devices : 4 Preferred Minor : 127 Persistence : Superblock is persistent Update Time : Thu Mar 21 16:27:40 2013 State : clean Active Devices : 4 Working Devices : 4 Failed Devices : 0 Spare Devices : 0 Layout : near=2 Chunk Size : 64K UUID : 0dbf4558:1a943464:132783e8:19cdff95 (local to host Microknoppix) Events : 0.4824680 Number Major Minor RaidDevice State 0 8 2 0 active sync /dev/sda2 1 8 17 1 active sync /dev/sdb1 2 8 33 2 active sync /dev/sdc1 3 8 49 3 active sync /dev/sdd1 However, there is no trace of the volume groups. Rebooting into knoppix does not help Restarting the old system (I actually replugged and re-added the failing disk for that – the system begins to start, but then fails to see the / partition – no wonder if the volume group is gone) does not help. sudo vgscan, sudo vgdisplay, sudo lvs, sudo lvdisplay, sudo vgscan –mknodes all returned No volume groups found. I am completely at a loss. Can anyone tell me if and how I can recover my data? Thanks in advance!

  Read the article

• Test your internet connection - Emtel Fixed Broadband

  Already at the begin of April, I had a phone conversation with my representative at Emtel Ltd. about some upcoming issues due to the ongoing construction work in my neighbourhood. Unfortunately, they finally raised the house two levels above ours, and of course this has to have a negative impact on the visibility between the WiMAX outdoor unit on the roof and the aimed access point at Medine. So, today I had a technical team here to do a site survey and to come up with potential solutions. Short version: It doesn't look good after all. The site survey Well, the two technicians did their work properly, even re-arranged the antenna to check the connection with another end point down at La Preneuse. But no improvements. Looks like we are out of luck since the construction next door hasn't finished yet and at the moment, it even looks like they are planning to put at least one more level on top. I really wonder about the sanity of the responsible bodies at the local district council. But that's another story. Anyway, the outdoor unit was once again pointed towards Medine and properly fixed with new cable guides (air from the sea and rust...). Both of them did a good job and fine-tuned the reception signal to a mere 3 over 9; compared to the original 7 over 9 I had before the daily terror started. The site survey has been done, and now it's up to Emtel to come up with (better) solutions. Well, I wouldn't mind to have an unlimited, symmetric 3G/UMTS or even LTE connection. Let's see what they can do... Testing the connection There are several online sites available which offer you to check certain aspects of your internet connection. Personally, I'm used to speedtest.net and it works very well. I think it is good and necessary to check your connection from time to time, and only a couple of days ago, I posted the following on Emtel's wall at Facebook (21.05.2013 - 14:06 hrs): Dear Emtel, could you eventually provide an answer on the miserable results of SpeedTest? I chose Rose Hill (Hosted by Emtel Ltd.) as testing endpoint... Sadly, no response to this. Seems that the marketing department is not willing to deal with customers on Facebook. Okay, over at speedtest.net you can use their Flash-based test suite to check your connection to quite a number of servers of different providers world-wide. It's actually very interesting to see the results for different end points and to compare them to each other. The results Following are the results of Rose Hill (hosted by Emtel) and respectively Frankfurt, Germany (hosted by Vodafone DE): Speedtest.net result of 30.05.2013 between Flic en Flac and Rose Hill, Mauritius (Emtel - Fixed Broadband) Speedtest.net result of 30.05.2013 between Flic en Flac and Frankfurt, Germany (Emtel - Fixed Broadband) Luckily, the results are quite similar in terms of connection speed; which is good. I'm currently on a WiMAX tariff called 'Classic Browsing 2', or Fixed Broadband as they call it now, which provides a symmetric line of 768 Kbps (or roughly 0.75 Mbps). In terms of downloads or uploads this means that I would be able to transfer files in either direction with approximately 96 KB/s. Frankly speaking, thanks to compression, my choice of browser and operating system I usually exceed this value and I have download rates up to 120 KB/s - not too bad after all. Only the ping times are a little bit of concern. Due to the difference in distance, or better said based on the number of hubs between the endpoints, they indicate the amount of time that it takes to send a package from your machine to the remote server and get a response back. A lower value is better, and usually the ping is less than 300 ms between Mauritius and Europe. The alternatives in Mauritius Not sure whether I should note this done because for my requirements there are no alternatives to Emtel WiMAX at the moment. It would be great to have your opinion on the situation of internet connectivity in Mauritius. Are there really alternatives? And if so, what are the conditions?

  Read the article

• Security Access Control With Solaris Virtualization

  - by Thierry Manfe-Oracle

  Numerous Solaris customers consolidate multiple applications or servers on a single platform. The resulting configuration consists of many environments hosted on a single infrastructure and security constraints sometimes exist between these environments. Recently, a customer consolidated many virtual machines belonging to both their Intranet and Extranet on a pair of SPARC Solaris servers interconnected through Infiniband. Virtual Machines were mapped to Solaris Zones and one security constraint was to prevent SSH connections between the Intranet and the Extranet. This case study gives us the opportunity to understand how the Oracle Solaris Network Virtualization Technology —a.k.a. Project Crossbow— can be used to control outbound traffic from Solaris Zones. Solaris Zones from both the Intranet and Extranet use an Infiniband network to access a ZFS Storage Appliance that exports NFS shares. Solaris global zones on both SPARC servers mount iSCSI LU exported by the Storage Appliance.  Non-global zones are installed on these iSCSI LU. With no security hardening, if an Extranet zone gets compromised, the attacker could try to use the Storage Appliance as a gateway to the Intranet zones, or even worse, to the global zones as all the zones are reachable from this node. One solution consists in using Solaris Network Virtualization Technology to stop outbound SSH traffic from the Solaris Zones. The virtualized network stack provides per-network link flows. A flow classifies network traffic on a specific link. As an example, on the network link used by a Solaris Zone to connect to the Infiniband, a flow can be created for TCP traffic on port 22, thereby a flow for the ssh traffic. A bandwidth can be specified for that flow and, if set to zero, the traffic is blocked. Last but not least, flows are created from the global zone, which means that even with root privileges in a Solaris zone an attacker cannot disable or delete a flow. With the flow approach, the outbound traffic of a Solaris zone is controlled from outside the zone. Schema 1 describes the new network setting once the security has been put in place. Here are the instructions to create a Crossbow flow as used in Schema 1 : (GZ)# zoneadm -z zonename halt ...halts the Solaris Zone. (GZ)# flowadm add-flow -l iblink -a transport=TCP,remote_port=22 -p maxbw=0 sshFilter  ...creates a flow on the IB partition "iblink" used by the zone to connect to the Infiniband.  This IB partition can be identified by intersecting the output of the commands 'zonecfg -z zonename info net' and 'dladm show-part'.  The flow is created on port 22, for the TCP traffic with a zero maximum bandwidth.  The name given to the flow is "sshFilter". (GZ)# zoneadm -z zonename boot  ...restarts the Solaris zone now that the flow is in place.Solaris Zones and Solaris Network Virtualization enable SSH access control on Infiniband (and on Ethernet) without the extra cost of a firewall. With this approach, no change is required on the Infiniband switch. All the security enforcements are put in place at the Solaris level, minimizing the impact on the overall infrastructure. The Crossbow flows come in addition to many other security controls available with Oracle Solaris such as IPFilter and Role Based Access Control, and that can be used to tackle security challenges.

  Read the article

• ReSharper 8.0 EAP now available

  - by TATWORTH

  Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2013/06/28/resharper-8.0-eap-now-available.aspxJetbrains have just released |ReSharper 8.0 Beta on their Early Access |Programme at http://www.jetbrains.com/resharper/whatsnew/?utm_source=resharper8b&utm_medium=newsletter&utm_campaign=resharper&utm_content=customersResharper 8.0 comes with the following new features:Support for Visual Studio 2013 Preview. Yes, ReSharper is known to work well with the fresh preview of Visual Studio 2013, and if you have already started digging into it, ReSharper 8.0 Beta is ready for the challenge.Faster code fixes. Thanks to the new Fix in Scope feature, you can choose to batch-fix some of the code issues that ReSharper detects in the scope of a project or the whole solution. Supported fixes include removing unused directives and redundant casts.Project dependency viewer. ReSharper is now able to visualize a project dependency graph for a bird's eye view of dependencies within your solution, all without compiling anything!Multifile templates. ReSharper's file templates can now be expanded to generate more than one file. For instance, this is handy for generating pairs of a main logic class and a class for extensions, or sets of partial files.Navigation improvements. These include a new action called Go to Everything to let you search for a file, type or method name from the same input box; support for line numbers in navigation actions; a new tool window called Assembly Explorer for browsing through assemblies; and two more contextual navigation actions: Navigate to Generic Substitutions and Navigate to Assembly Explorer.New solution-wide refactorings. The set of fresh refactorings is headlined by the highly requested Move Instance Method to move methods between classes without making them static. In addition, there are Inline Parameter and Pull Parameter. Last but not least, we're also introducing 4 new XAML-specific refactorings!Extraordinary XAML support. A plethora of new and improved functionality for all developers working with XAML code includes dedicated grid inspections and quick-fixes; Extract Style, Extract, Move and Inline Resource refactorings; atomic renaming of dependency properties; and a lot more.More accessible code completion. ReSharper 8 makes more of its IntelliSense magic available in automatic completion lists, including extension methods and an option to import a type. We're also introducing double completion which gives you additional completion items when you press the corresponding shortcut for the second time.A new level of extensibility. With the new NuGet-based Extension Manager, discovering, installing and uninstalling ReSharper extensions becomes extremely easy in Visual Studio 2010 and higher. When we say extensions, we mean not only full-fledged plug-ins but also sets of templates or SSR patterns that can now be shared much more easily.CSS support improvements. Smarter usage search for CSS attributes, new CSS-specific code inspections, configurable support for CSS3 and earlier versions, compatibility checks against popular browsers - there's a rough outline of what's new for CSS in ReSharper 8.A command-line version of ReSharper. ReSharper 8 goes beyond Visual Studio: we now provide a free standalone tool with hundreds of ReSharper inspections and additionally a duplicate code finder that you can integrate with your CI server or version control system.Multiple minor improvements in areas such as decompiling and code formatting, as well as support for the Blue Theme introduced in Visual Studio 2012 Update 2.

  Read the article

• SQL Saturday and Exploring Data Privacy

  - by Johnm

  I have been highly impressed with the growth of the SQL Saturday phenomenon. It seems that an announcement for a new wonderful event finds its way to my inbox on a daily basis. I have had the opportunity to attend the first of the SQL Saturday's for Tampa, Chicago, Louisville and recently my home town of Indianapolis. It is my hope that there will be many more in my future. This past weekend I had the honor of being selected to speak amid a great line up of speakers at SQL Saturday #82 in Indianapolis. My session topic/title was "Exploring Data Privacy". Below is a brief synopsis of my session: Data Privacy in a Nutshell        - Definition of data privacy        - Examples of personally identifiable data        - Examples of Sensitive data Laws and Stuff        - Various examples of laws, regulations and policies that influence the definition of data privacy        - General rules of thumb that encompasses most laws Your Data Footprint        - Who has personal information about you?        - What are you exchanging data privacy for?        - The amazing resilience of data        - The cost of data loss Weapons of Mass Protection       - Data classification       - Extended properties       - Database Object Schemas       - An extraordinarily brief introduction of encryption       - The amazing data professional  <-the most important point of the entire session! The subject of data privacy is one that is quickly making its way to the forefront of the mind of many data professionals. Somewhere out there someone is storing personally identifiable and other sensitive data about you. In some cases it is kept reasonably secure. In other cases it is kept in total exposure without the consideration of its potential of damage to you. Who has access to it and how is it being used? Are we being unnecessarily required to supply sensitive data in exchange for products and services? These are just a few questions on everyone's mind. As data loss events of grand scale hit the headlines in a more frequent succession, the level of frustration and urgency for a solution increases. I assembled this session with the intent to raise awareness of sensitive data and remind us all that we, data professionals, are the ones who have the greatest impact and influence on how sensitive data is regarded and protected. Mahatma Gandhi once said "Be the change you want to see in the world." This is guidance that I keep near to my heart as I approached this topic of data privacy.

  Read the article

• Seeking advice on tools and technology for my new game [closed]

  - by k.k. slider

  I'm a C# developer who has been programming a game in my spare time using XNA and Visual Studio. The game's logic is mostly done and I've completed a prototype that has most of the functionality of (what I envision to be) the final game. However, having heard about the uncertain future and (possibly) limited audience for XNA games, I'm looking to switch platforms... but I don't know what technology would best suit my needs. Below are some specifics about my game and what exactly I'm looking for, if you're interested: The game is a 2D turn-based tactical RPG (strategy game) for two players. It is a basic sprite and tile based game with animations and sound. 3D capabilities are not necessary. I'd like to allow players to compete with others online, and have a basic ranking/matchmaking system. I will probably need something that can interact with a server and a database (the game is turn-based and has no RNG, so cheating would be easy to detect even if most computation is done client-side and minimal data is sent to the server). Ideally, I would be able to release an early version of the game and have people give feedback as I develop additional features (similar to Minecraft). I'd prefer to have a way to release periodic updates to the game instead of releasing an absolute final product. To reach the widest possible audience, I'd prefer technology that allows me to release on PC, Android, iOS, and (maybe) Mac. This is a game with simple mouse inputs which can fit on a mobile touch screen. The game should be monetizable. If I find success with this game, then I may consider becoming a full-time indie game developer. I have several other game ideas and have learned quite a bit from my first attempt at game development. My first thought was an F2P/microtransaction model, but I'm open to other suggestions. Language isn't a primary concern of mine, since I have a decent amount of experience using several languages to program large projects. I'm willing to spend money (e.g. on a developer's license), but the more expensive it gets, the more hesitant I am to use it. I've looked into the following solutions... there are a LOT of tools out there... if anyone has experience with any of these and would like to recommend/reject any of them, it would be helpful. C#/.NET (XNA/MonoGame/SDL/SlimDX/Xamarin/ExEn/ANX?) HTML5/JS (AppMobi/PhoneGap/Marmalade/FlashCanvas/Cordova/libRocket?) Python (Pyglet/Pygame/Kivy?) Java (JavaFX/libGDX?) Unity/Construct 2/Cocos2D/NME/Corona/other game creation software? I'd like something that can do 2D and isn't limited by being too high-level. Other languages (Lua/LOVE? Moai?) Thanks for answering this rather long and tedious question...

  Read the article

• Profiling Silverlight Applications after installing Visual Studio 2010 Service Pack 1

  - by mbcrump

  Introduction Now that the dust has settled and everyone has downloaded and installed Visual Studio 2010 Service Pack 1, its time to talk about a new feature included that will help Silverlight Developers profile their applications. Let’s take a look at what the official documentation says about it: Performance Wizard for Silverlight – taken from VS2010 SP1 KB. Visual Studio 2010 SP1 enables you to tune the Silverlight application performance by profiling the code. A traditional code profiler cannot tune the rendering performance for Silverlight applications. Many higher-level profilers are added to Visual Studio 2010 SP1 so that you can better determine which parts of the application consume time. So, how do you do it? After you finish installing VS2010 SP1, make sure it took by going to Help –> About. You should see SP1Rel under Visual Studio 2010 as shown below. Now, that we have verified you are on the most current release, let’s load up a Silverlight Application. I’m going to take my hobby Silverlight project that I created a month or so ago. The reason that I’m picking this project is that I didn’t focus so much on performance as it was just built for fun and to see what I could do with Silverlight. I believe this makes the perfect application to profile.  After the project is loaded, click on Analyze then Launch Performance Wizard. Go ahead and click on CPU Sampling (recommended). You will notice that it ask which application to target. By Default, it will select the .Web project in an Silverlight Application. Go ahead and leave the default Web Project checked. We are going to leave the client as Internet Explorer. Now, go ahead and click finish. Now your Silverlight Application will launch. While your application is running, you will see the following inside of Visual Studio 2010. Here is where you will need to attach your Silverlight Application to the web application that is current being profiled. Simply click on the  Attach/Detach button below and find your application to attach to the profiler. In my case, I am using IE8 and could find it by the title. After you close your browser, you will notice it generated a report: These files will end with a .VSP If you click on the .VSP you will it generated the following report: We could turn off “Just My Code” but it may pick up things that we didn’t want to profile as shown below: One other feature to note is that you may want to export the data to a CSV or XML. You can do that by looking at the toolbar and clicking the button highlighted below. Conclusion The profiler for Silverlight is a great addition to an already great product. So before you ship a Silverlight Application run it through the profile and see what comes up. Since its included and free I can’t see a reason not to do this. Thanks again for reading and I hope you subscribe to my blog or follow me on Twitter for more Silverlight/WP7 fun.  Subscribe to my feed

  Read the article

< Previous Page | 550 551 552 553 554 555 556 557 558 559 560 561  | Next Page >