Search Results

Search found 24301 results on 973 pages for 'execution process mfg'.

Page 555/973 | < Previous Page | 551 552 553 554 555 556 557 558 559 560 561 562  | Next Page >

  • mdadm raid5 recover double disk failure - with a twist (drive order)

    - by Peter Bos
    Let me acknowledge first off that I have made mistakes, and that I have a backup for most but not all of the data on this RAID. I still have hope of recovering the rest of the data. I don't have the kind of money to take the drives to a recovery expert company. Mistake #0, not having a 100% backup. I know. I have a mdadm RAID5 system of 4x3TB. Drives /dev/sd[b-e], all with one partition /dev/sd[b-e]1. I'm aware that RAID5 on very large drives is risky, yet I did it anyway. Recent events The RAID become degraded after a two drive failure. One drive [/dev/sdc] is really gone, the other [/dev/sde] came back up after a power cycle, but was not automatically re-added to the RAID. So I was left with a 4 device RAID with only 2 active drives [/dev/sdb and /dev/sdd]. Mistake #1, not using dd copies of the drives for restoring the RAID. I did not have the drives or the time. Mistake #2, not making a backup of the superblock and mdadm -E of the remaining drives. Recovery attempt I reassembled the RAID in degraded mode with mdadm --assemble --force /dev/md0, using /dev/sd[bde]1. I could then access my data. I replaced /dev/sdc with a spare; empty; identical drive. I removed the old /dev/sdc1 from the RAID mdadm --fail /dev/md0 /dev/sdc1 Mistake #3, not doing this before replacing the drive I then partitioned the new /dev/sdc and added it to the RAID. mdadm --add /dev/md0 /dev/sdc1 It then began to restore the RAID. ETA 300 mins. I followed the process via /proc/mdstat to 2% and then went to do other stuff. Checking the result Several hours (but less then 300 mins) later, I checked the process. It had stopped due to a read error on /dev/sde1. Here is where the trouble really starts I then removed /dev/sde1 from the RAID and re-added it. I can't remember why I did this; it was late. mdadm --manage /dev/md0 --remove /dev/sde1 mdadm --manage /dev/md0 --add /dev/sde1 However, /dev/sde1 was now marked as spare. So I decided to recreate the whole array using --assume-clean using what I thought was the right order, and with /dev/sdc1 missing. mdadm --create /dev/md0 --assume-clean -l5 -n4 /dev/sdb1 missing /dev/sdd1 /dev/sde1 That worked, but the filesystem was not recognized while trying to mount. (It should have been EXT4). Device order I then checked a recent backup I had of /proc/mdstat, and I found the drive order. md0 : active raid5 sdb1[0] sde1[4] sdd1[2] sdc1[1] 8790402048 blocks super 1.2 level 5, 512k chunk, algorithm 2 [4/4] [UUUU] I then remembered this RAID had suffered a drive loss about a year ago, and recovered from it by replacing the faulty drive with a spare one. That may have scrambled the device order a bit...so there was no drive [3] but only [0],[1],[2], and [4]. I tried to find the drive order with the Permute_array script: https://raid.wiki.kernel.org/index.php/Permute_array.pl but that did not find the right order. Questions I now have two main questions: I screwed up all the superblocks on the drives, but only gave: mdadm --create --assume-clean commands (so I should not have overwritten the data itself on /dev/sd[bde]1. Am I right that in theory the RAID can be restored [assuming for a moment that /dev/sde1 is ok] if I just find the right device order? Is it important that /dev/sde1 be given the device number [4] in the RAID? When I create it with mdadm --create /dev/md0 --assume-clean -l5 -n4 \ /dev/sdb1 missing /dev/sdd1 /dev/sde1 it is assigned the number [3]. I wonder if that is relevant to the calculation of the parity blocks. If it turns out to be important, how can I recreate the array with /dev/sdb1[0] missing[1] /dev/sdd1[2] /dev/sde1[4]? If I could get that to work I could start it in degraded mode and add the new drive /dev/sdc1 and let it resync again. It's OK if you would like to point out to me that this may not have been the best course of action, but you'll find that I realized this. It would be great if anyone has any suggestions.

    Read the article

  • Where to start with game development?

    - by steven_desu
    I asked this earlier in this thread at stackoverflow.com. One of the early comments redirected me here to gamedev.stackexchange.com, so I'm reposting here. Searching for related questions I found a number of very specific questions, but I'm afraid the specifics have proved fruitless for me and after 4 hours on Google I'm no closer than I started, so I felt reaching out to a community might be in order. First, my goal: I've never made a game before, although I've muddled over the possibility several times. I decided to finally sit down and start learning how to code games, use game engines, etc. All so that one day (hopefully soon) I'll be able to make functional (albeit simple) games. I can start adding complexity later, for now I'd be glad to have a keyboard-controlled camera moving in a 3D world with no interaction beyond that. My background: I've worked in SEVERAL programming languages ranging from PHP to C++ to Java to ASM. I'm not afraid of any challenges that come with learning the new syntax or limitations inherent in a new language. All of my past programming experience, however, has been strictly non-graphical and usually with little or extremely simple interaction during execution. I've created extensive and brilliant algorithms for solving logical and mathematical problems as well as graphing problems. However in every case input was either defined in a file, passed form an HTML form, or typed into the console. Real-time interaction with the user is something with which I have no experience. My question: Where should I start in trying to make games? Better yet- where should I start in trying to create a keyboard-navigable 3D environment? In searching online I've found several resources linking to game engines, graphics engines, and physics engines. Here's a brief summary of my experiences with a few engines I tried: Unreal SDK: The tutorial videos assume that you already have in-depth knowledge of 3D modeling, graphics engines, animations, etc. The "Getting Started" page offers no formal explanation of game development but jumps into how Unreal can streamline processes it assumes you're already familiar with. After downloading the SDK and launching it to see if the tools were as intuitive as they claimed, I was greeted with about 60 buttons and a blank void for my 3D modeling. Clicking on "add volume" (to attempt to add a basic cube) I was met with a menu of 30 options. Panicking, I closed the editor. Crystal Space: The website seemed rather informative, explaining that Crystal Space was just for graphics and the companion software, CEL, provided entity logic for making games. A demo game was provided, which was built using "CELStart", their simple tool for people with no knowledge of game programming. I launched the game to see what I might look forward to creating. It froze several times, the menus were buggy, there were thousands of graphical glitches, enemies didn't respond to damage, and when I closed the game it locked up. Gave up on that engine. IrrLicht: The tutorial assumes I have Visual Studio 6.0 (I have Visual Studio 2010). Following their instructions I was unable to properly import the library into Visual Studio and unable to call any of the functions that they kept using. Manually copying header files, class files, and DLLs into my project's folder - the project failed to properly compile. Clearly I'm not off to a good start and I'm going in circles. Can someone point me in the right direction? Should I start by downloading a program like Blender and learning 3D modeling, or should I be learning how to use a graphics engine? Should I look for an all-inclusive game engine, or is it better to try and code my own game logic? If anyone has actually made their own games, I would prefer to hear how they got their start. Also- taking classes at my school is not an option. Nothing is offered.

    Read the article

  • How to install network drivers during installation?

    - by Matt
    I have a server that I'm attempting to install windows onto. However, the disk is an iscsi target provided by ipxe. Everything appears to go well until about 3/4 through the install process I get an error about a critical driver missing and the installation is cancelled. I would say the critical driver would be the network card. It's an intel nic and the drivers are not on the windows installation CD. I tried slipstreaming them with RTSevenLite, but after it created the CD it seems it failed to make it bootable. I've also not been successful in making a bootable USB thumb drive or USB HDD. I suspect a buggy bios even though I have the latest. How to install network drivers during installation? Windows used to provide an optional F6 during install feature but this seems to be missing in Windows Servert 2008. Perhaps there is a way to do this, or another method?

    Read the article

  • Is the difference between sudo and gksu the same as the difference between sudo -i and sudo -s?

    - by fred.bear
    Is the difference between sudo cmd and gksu cmd, the same as the difference between starting a shell with sudo -i and sudo -s? ... or put another way, Is sudo cmd the same as sudo -i cmd and gksu cmd the same as sudo -s cmd? EDIT: Based on what I read on an Ubuntu Documentation Page where it says: You should never use normal sudo to start graphical applications as root. You should use gksudo (kdesudo on Kubuntu) to run such programs. gksudo sets HOME=~root, and copies .Xauthority to a tmp directory. This prevents files in your home directory becoming owned by root. (AFAICT, this is all that's special about the environment of the started process with gksudo vs. sudo). The "AFAICT" doen't really give me full confidence that there is nothing more to it. (..a belated UPDATE: I tested his commemnt today (2 months later) about: "This prevents files in your home directory becoming owned by root." All files I created via sudo/gksu were all owned by "root", and the group was "root".) I've read parts of the info sudo and noticed the -i and -s seem to be doing the same thing as the AFAICT environment issue... but I hit overload.. so I've asked my question here. PS.. My question is not about sudo vs gksu .. It is more about: Is gksu the same as sudo -s .. and if not, how do they differ?

    Read the article

  • How to implement a birds eye view of 2D Grid Map using Android

    - by IM_Adan
    I'm a true beginner with using the android platform and I'm having difficulties on implementing a 2D grid system for a tower defense type game. Where I can place towers on a specific tile and enemies will be able to traverse through tiles etc. What I would like is a practical explanation of how I could tackle this. A step by step guide for dummies. This is what I believe are the necessary steps to take, I think I might be wrong but I hope someone could help me out. Calculate the Width and Height of the view I'm working with. Based on that, determine the number of tiles required and their dimensions, (Still not sure how I would do this) Create each tile as a Rectangle object and draw these rectangle on a canvas I would really be grateful if someone could steer me in the right direction on how to implement a 2D Grid Map using android. I hope the answer to this questions helps the TRUE beginners out there like me. I have looked at the following links below yet I still feel that I don't trully understand what's going on. For XNA: 2D Grid based game - how should I draw grid lines? How to Create a Grid for a 2D Game? Also a quick note: All my previous game development has been in Java, mostly using Java SE and Swing. I also have good understanding of the game development process, it is only android thats confusing me :S

    Read the article

  • Big project layout : adding new feature on multiple sub-projects

    - by Shiplu
    I want to know how to manage a big project with many components with version control management system. In my current project there are 4 major parts. Web Server Admin console Platform. The web and server part uses 2 libraries that I wrote. In total there are 5 git repositories and 1 mercurial repository. The project build script is in Platform repository. It automates the whole building process. The problem is when I add a new feature that affects multiple components I have to create branch for each of the affected repo. Implement the feature. Merge it back. My gut feeling is "something is wrong". So should I create a single repo and put all the components there? I think branching will be easier in that case. Or I just do what I am doing right now. In that case how do I solve this problem of creating branch on each repository?

    Read the article

  • Issues running java in Solaris 9 container

    - by Matthew Watson
    Hi, I have a solaris 9 container built from a physical server using flarcreate. Everything seems fine, except when trying to trying to run any "java -server" process it fails with the following error This is on a Sunfire T1000 machine running Solaris 10 10/09 s10s_u8wos_08a SPARC Running jdk1.5.0_15 Exception java.lang.OutOfMemoryError: requested -4 bytes for size_t in /BUILD_AREA/jdk1.5.0_15/hotspot/src/os/solaris/vm/os_solaris.cpp. Out of swap space? As far as I can tell I'm not actually out of swap space. Running java in client mode works without a problem. Googles only suggestion is related to x86. Any suggestions? Thanks.

    Read the article

  • Partner Webcast - Oracle Reports to BI Publisher migration

    - by dmitry.nefedkin(at)oracle.com
    Normal 0 false false false RU X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} Monday, March 21, 2011 9 a.m. CET (10 a.m. EET) Description Oracle Reports, a component of Oracle Fusion Middleware is Oracle's classic, high-fidelity enterprise reporting tool. Oracle remains committed to the development of this technology, and to the ongoing release as a component of the Oracle Fusion Middleware platform, but also enables conversion of Oracle Reports to Oracle BI Publisher. Oracle Business Intelligence Publisher (BI Publisher)--Oracle's enterprise reporting server to author, manage, and deliver all types of highly formatted documents. Extremely efficient and highly scalable, BI Publisher can generate tens of thousands of documents per hour with minimal impact to transactional systems. After a quick introduction to BI Publisher we will look at the process of Oracle Reports to BI Publisher convestion. AgendaOracle Reports strategy & support policyReporting challengesBenefits of BI PublisherOracle Reports -> BI Publisher Conversion UtilityDemoUpgrade BI Publisher to 11gQ&A Delivery Format This Free online Live Internet Seminar will be delivered over the Web and Conference Call. Duration: 1hour To register, click HERE. For any questions please contact [email protected].

    Read the article

  • Install proprietary drivers 14.04 NVIDIA (steam segmentation issue)

    - by allthosemiles
    Recently, I finally got the official drivers for my NVIDIA 560 Ti card installed on Ubuntu 14.04 (hooray) However I started looking into installing Steam and I'm getting segmentation errors when I try to run the software. I tried installing 32-bit libs and it seemed like they weren't available or they were already installed. Upon further investigation, I found that a solution is to install the proprietary drivers, install steam then switch back to the other drivers. I'm not really sure what "proprietary drivers" are in all honesty. Has anyone gone through this process that could provide some insight here? (I installed the official 64-bit driver from the NVIDIA site for my 560 Ti just for reference. And the Ubuntu version installed is 64-bit as well) Update: This is the error text I get when trying to run steam after installing it via the ubuntu store. Running Steam on ubuntu 14.04 64-bit STEAM_RUNTIME is enabled automatically Installing breakpad exception handler for appid(steam)/version(1401381906_client) /home/dbrewer/.steam/steam.sh: line 755: 3943 Segmentation fault (core dumped) $STEAM_DEBUGGER "$STEAMROOT/$PLATFORM/$STEAMEXE" "$@" mv: cannot stat ‘/home/dbrewer/.steam/registry.vdf’: No such file or directory Installing bootstrap /home/dbrewer/.steam/bootstrap.tar.xz Reset complete! Restarting Steam by request... Running Steam on ubuntu 14.04 64-bit STEAM_RUNTIME has been set by the user to: /home/dbrewer/.steam/ubuntu12_32/steam-runtime Installing breakpad exception handler for appid(steam)/version(1401381906_client) /home/dbrewer/.steam/steam.sh: line 755: 4066 Segmentation fault (core dumped) $STEAM_DEBUGGER "$STEAMROOT/$PLATFORM/$STEAMEXE" "$@" What I get when I run "steam --reset" mv: cannot stat ‘/home/dbrewer/.steam/registry.vdf’: No such file or directory Installing bootstrap /home/dbrewer/.steam/bootstrap.tar.xz Reset complete!

    Read the article

  • performance monitor in iis 7 to monitor which website is using most resources (asp.net)

    - by Karl Cassar
    I am using Windows Server 2008 R2 and IIS 7.5, and am hosting multiple websites on the same webserver. Is it possible to use Performance Monitor to know on average which website is using the most resources? I've added a user-defined Data Collector Set in Performance Monitor collecting data for 1 day. However, I could not find any details which hint which website is using the most resources. Which counters are crucial to monitor websites? The generated report tells me that the top process is w3wp##1 - how can I know which website it corresponds to? I've also tried to add counters for ASP.Net Applications for all object instances, however % Managed Processor Time (estimated) is 0 at all times.

    Read the article

  • Need game development sandbox like Etoys to do 2D games prototyping

    - by Dimitry Tato
    I am new to game development, and currently working on development a mobile 2D game (for android). As the part of the development process, I need to build a prototype and playtest it, to see if the game mechanics and user interaction is ok For example: if I have a starship shooting at ememies, I need to see what's the best size for my starship. what trajectories should the enemy ships fly and what velocity. Should the enemy ships be coming only from left to right, or also from top Should the enemy ships form a 'flock' or just fly by themselves what's the best 'powerup' pickup mechanics: to shoot it, or to pick it with the ship etc Implementing these details directly in Java (Android) is time consuming and as many of the 'hypotheses' will be rejected, I also don't want to invest a lot of time to code thigs, majority of which gonna be rejected. I found 'tool' Etoys http://www.youtube.com/watch?v=34cWCnLC5nM&feature=related and official website http://www.squeakland.org/ which helps to build 'prototype' quickly, but Etoys is meant for children learning programming and is too basic. SO MY QUESTION IS: Is there any prototyping tool, as simple as Etoys and with better prototype quality?

    Read the article

  • Developing a feature which sole purpose to be taken out?

    - by adib
    What is the name of the pattern in which individual contributors (programmers/designers) developed an artifact for the sole purpose is to serve as a diversion so that management can remove that feature in the final product? This is a folklore I heard from an ex-colleague who used to work at a large game development company. At that company, it is well known that middle management is pressurized to "give inputs" and "make changes" to the product otherwise they risk being seen as not contributing to the project. This situation have delayed many projects because of these superfluous "management inputs". In one project at the above company, the artists and developers created a supernumerary animated character that appears in every cutscene and sticks out like a sore thumb. They designed it in such a way that it can be easily removed before the game is shipped (this was when games were still sold in physical media and not a downloadable product). Obviously the management then voted to remove the animation. On the positive side, management didn't introduced any unnecessary changes that would have delayed the project because they have shown that they provided constructive inputs to the product. This process pattern has a name among game programmers that work in corporates, but I forgot what was the actual name. I believe it's duck-something. Anybody can help pointing out the name and perhaps some rather credible reference to how the pattern develops?.

    Read the article

  • Releasing an open source project without getting embarrassed

    - by Hopeful
    I've been working by myself on a fairly large open source project for quite a while and it's nearing the point where I'd like to release it. However, I'm self-taught and I don't really know anyone who could adequately review my project. A few years ago, I had released a small bit of code which pretty much got ripped apart (in a critical sense) on the forum where I released it. Even though the code worked, the criticism was accurate but brutal. It prompted me to begin searching for best practices for everything and in the end I feel that it made me a much better developer. I've gone over everything in my project so many times trying to make it perfect that I've lost count. I believe in my project and think it has the potential to help a lot of people and I feel like I've done some cool things in interesting ways with it. Still, because I'm self-taught, I can't help but wonder what gaps exist in my self-education. The way my code was ripped apart last time isn't something I'd like to repeat. I think my two biggest fears with releasing my project that I've poured countless hours into are being absolutely embarrassed because I missed some patently obvious things because of my self-education or, worse, releasing it to the sound of crickets. Is there anyone who has been in a similar situation? I'm not afraid of constructive criticism, so long as it is constructive and not just a rant on how I screwed up. I know there is a code review site on StackExchange, but it's not really set up for large projects and I didn't feel like the community there is large enough yet to get good feedback if I were to post parts of my project piecemeal (I tried with one file). What can I do to give my project at least some measure of success without getting embarrassed or devestated in the process?

    Read the article

  • Can't connect to smtp (postfix, dovecot) after making a change and trying to change it back

    - by UberBrainChild
    I am using postfix and dovecot along with zpanel and I tried enabling SSL and then turned it off as I did not have SSL configured yet and I realized it was a bit stupid at the time. I am using CentOS 6.4. I get the following error in the mail log. (I changed my host name to "myhostname" and my domain to "mydomain.com") Oct 20 01:49:06 myhostname postfix/smtpd[4714]: connect from mydomain.com[127.0.0.1] Oct 20 01:49:16 myhostname postfix/smtpd[4714]: fatal: no SASL authentication mechanisms Oct 20 01:49:17 myhostname postfix/master[4708]: warning: process /usr/libexec/postfix/smtpd pid 4714 exit status 1 Oct 20 01:49:17 amyhostname postfix/master[4708]: warning: /usr/libexec/postfix/smtpd: bad command startup -- throttling Reading on forums and similar questions I figured it was just a service that was not running or installed. However I can see that saslauthd is currently up and running on my system and restarting it does not help. Here is my postfix master.cf # # Postfix master process configuration file. For details on the format # of the file, see the Postfix master(5) manual page. # # ***** Unused items removed ***** # ========================================================================== # service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (yes) (never) (100) # ========================================================================== smtp inet n - n - - smtpd # -o content_filter=smtp-amavis:127.0.0.1:10024 # -o receive_override_options=no_address_mappings pickup fifo n - n 60 1 pickup submission inet n - - - - smtpd -o content_filter= -o receive_override_options=no_header_body_checks cleanup unix n - n - 0 cleanup qmgr fifo n - n 300 1 qmgr #qmgr fifo n - n 300 1 oqmgr tlsmgr unix - - n 1000? 1 tlsmgr rewrite unix - - n - - trivial-rewrite bounce unix - - n - 0 bounce defer unix - - n - 0 bounce trace unix - - n - 0 bounce verify unix - - n - 1 verify flush unix n - n 1000? 0 flush proxymap unix - - n - - proxymap smtp unix - - n - - smtp smtps inet n - - - - smtpd # When relaying mail as backup MX, disable fallback_relay to avoid MX loops relay unix - - n - - smtp -o fallback_relay= # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - n - - showq error unix - - n - - error discard unix - - n - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - n - - lmtp anvil unix - - n - 1 anvil scache unix - - n - 1 scache # # ==================================================================== # Interfaces to non-Postfix software. Be sure to examine the manual # pages of the non-Postfix software to find out what options it wants. # ==================================================================== maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient} uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=foo argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient # # spam/virus section # smtp-amavis unix - - y - 2 smtp -o smtp_data_done_timeout=1200 -o disable_dns_lookups=yes -o smtp_send_xforward_command=yes 127.0.0.1:10025 inet n - y - - smtpd -o content_filter= -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_recipient_restrictions=permit_mynetworks,reject -o mynetworks=127.0.0.0/8 -o smtpd_error_sleep_time=0 -o smtpd_soft_error_limit=1001 -o smtpd_hard_error_limit=1000 -o receive_override_options=no_header_body_checks -o smtpd_bind_address=127.0.0.1 -o smtpd_helo_required=no -o smtpd_client_restrictions= -o smtpd_restriction_classes= -o disable_vrfy_command=no -o strict_rfc821_envelopes=yes # # Dovecot LDA dovecot unix - n n - - pipe flags=DRhu user=vmail:mail argv=/usr/libexec/dovecot/deliver -d ${recipient} # # Vacation mail vacation unix - n n - - pipe flags=Rq user=vacation argv=/var/spool/vacation/vacation.pl -f ${sender} -- ${recipient} And here is dovecot ## ## Dovecot config file ## listen = * disable_plaintext_auth = no protocols = imap pop3 lmtp sieve auth_mechanisms = plain login passdb { driver = sql args = /etc/zpanel/configs/dovecot2/dovecot-mysql.conf } userdb { driver = sql } userdb { driver = sql args = /etc/zpanel/configs/dovecot2/dovecot-mysql.conf } mail_location = maildir:/var/zpanel/vmail/%d/%n first_valid_uid = 101 #last_valid_uid = 0 first_valid_gid = 12 #last_valid_gid = 0 #mail_plugins = mailbox_idle_check_interval = 30 secs maildir_copy_with_hardlinks = yes service imap-login { inet_listener imap { port = 143 } } service pop3-login { inet_listener pop3 { port = 110 } } service lmtp { unix_listener lmtp { #mode = 0666 } } service imap { vsz_limit = 256M } service pop3 { } service auth { unix_listener auth-userdb { mode = 0666 user = vmail group = mail } # Postfix smtp-auth unix_listener /var/spool/postfix/private/auth { mode = 0666 user = postfix group = postfix } } service auth-worker { } service dict { unix_listener dict { mode = 0666 user = vmail group = mail } } service managesieve-login { inet_listener sieve { port = 4190 } service_count = 1 process_min_avail = 0 vsz_limit = 64M } service managesieve { } lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes protocol lda { mail_plugins = quota sieve postmaster_address = [email protected] } protocol imap { mail_plugins = quota imap_quota trash imap_client_workarounds = delay-newmail } lmtp_save_to_detail_mailbox = yes protocol lmtp { mail_plugins = quota sieve } protocol pop3 { mail_plugins = quota pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } protocol sieve { managesieve_max_line_length = 65536 managesieve_implementation_string = Dovecot Pigeonhole managesieve_max_compile_errors = 5 } dict { quotadict = mysql:/etc/zpanel/configs/dovecot2/dovecot-dict-quota.conf } plugin { # quota = dict:User quota::proxy::quotadict quota = maildir:User quota acl = vfile:/etc/dovecot/acls trash = /etc/zpanel/configs/dovecot2/dovecot-trash.conf sieve_global_path = /var/zpanel/sieve/globalfilter.sieve sieve = ~/dovecot.sieve sieve_dir = ~/sieve sieve_global_dir = /var/zpanel/sieve/ #sieve_extensions = +notify +imapflags sieve_max_script_size = 1M #sieve_max_actions = 32 #sieve_max_redirects = 4 } log_path = /var/log/dovecot.log info_log_path = /var/log/dovecot-info.log debug_log_path = /var/log/dovecot-debug.log mail_debug=yes ssl = no Does anyone have any ideas or tips on what I can try to get this working? Thanks for all the help EDIT: Output of postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases broken_sasl_auth_clients = yes command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix debug_peer_level = 2 delay_warning_time = 4 disable_vrfy_command = yes html_directory = no inet_interfaces = all mail_owner = postfix mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = localhost.$mydomain, localhost mydomain = control.yourdomain.com myhostname = control.yourdomain.com mynetworks = all newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.2.2/README_FILES recipient_delimiter = + relay_domains = proxy:mysql:/etc/zpanel/configs/postfix/mysql-relay_domains_maps.cf sample_directory = /usr/share/doc/postfix-2.2.2/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtp_use_tls = no smtpd_client_restrictions = smtpd_data_restrictions = reject_unauth_pipelining smtpd_helo_required = yes smtpd_helo_restrictions = smtpd_recipient_restrictions = permit_sasl_authenticated, permit_mynetworks, reject_unauth_destination, reject_non_fqdn_sender, reject_non_fqdn_recipient, reject_unknown_recipient_domain smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = $myhostname smtpd_sasl_path = private/auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_sender_restrictions = smtpd_use_tls = no soft_bounce = yes transport_maps = hash:/etc/postfix/transport unknown_local_recipient_reject_code = 550 virtual_alias_maps = proxy:mysql:/etc/zpanel/configs/postfix/mysql-virtual_alias_maps.cf, regexp:/etc/zpanel/configs/postfix/virtual_regexp virtual_gid_maps = static:12 virtual_mailbox_base = /var/zpanel/vmail virtual_mailbox_domains = proxy:mysql:/etc/zpanel/configs/postfix/mysql-virtual_domains_maps.cf virtual_mailbox_maps = proxy:mysql:/etc/zpanel/configs/postfix/mysql-virtual_mailbox_maps.cf virtual_minimum_uid = 101 virtual_transport = dovecot virtual_uid_maps = static:101

    Read the article

  • Is it possible to format ps RSS (memory) output to be more human friendly?

    - by metasoarous
    Executing ps ux returns a nice list of process information, easy to grep through or watch. However, there doesn't seem to be much flexibility in the memory usage output; the RSS (resident set size) is printed in kB, which for large processes is hard to read (especially at a glance), and %MEM gives 100 × RSS / system_memory. The du utility has a lovely -h flag which prints space in a more user friendly fashion. I have not been able to find anything equivalent for ps. Is there a special formatting trick that can accomplish this?

    Read the article

  • links for 2010-06-04

    - by Bob Rhubart
    @biemond: JEJB Transport and manipulating the Java Response in OSB 11g "JEJB Transport works like the EJB Transport," says Oracle ACE Edwin Biemond, "but the request and response objects are not translated to XML so you can't use XQuery etc. To make things not too hard, OSB 11g makes a XML presentation of the request method and its parameters, which you can use in the Proxy Service." (tags: oracleace soa oracle jejb java) @bex: Oracle UCM jQuery Plugin  "This connector allows you to use jQuery to make UCM Service calls through AJAX, and easily display the results,: says Oracle Ace Director Bex Huff. "This is 100% pure JavaScript, no Java, Idoc, or ADF required!" (tags: oracleace ucm oracle otn enterprise2.0) Oracle Solaris Studio Express 6/10 and its Customer Feedback Program are now available (Oracle Developer Tools Blog) "Oracle Solaris Studio Express 6/10 is available on Solaris 10 (SPARC, x86), OEL 5 (x86), RHEL 5 (x86), SuSE 11 (x86) today and will be available for OpenSolaris in the near future," says Pieter Humphrey. (tags: oracle otn solaris sparc liunux) @soatoday: EA and SOA Should Report to COO "So, who gets EA-- the CIO or VP of a Business? I argue neither! After all, a typical EA goal is to connect the Business and IT together to impart better structure and visibility across the enterprise. I firmly believe that neither should own EA so that neither imparts too much of their organization (i.e bias) on the EA process and deliverables. EA needs to be independent, and it's for all the right reasons." -- Orace ACE Director JOrdan Braunstein (tags: oracleace entarch soa)

    Read the article

  • Burned CD-R are not identical to the input iso image, why?

    - by Grumbel
    I have the issue that sometimes when I burn an iso image to a CD-R with: sudo wodim -v driveropts=burnfree -data dev=/dev/scd0 input.iso And then read it back out again with: sudo dd if=/dev/cdrom of=output.iso dd: reading `/dev/cdrom': Input/output error ... That I end up with two iso images that are not identical, namely the output.iso is missing 2048 bytes at the end. When I however mount the iso image or CD-R and compare the actual files on the mountpoint, both are identical. Is that expected behavior or is that an actually incorrect burn of the data? And if its expected, how can I verify that the burn process was successful? The reason why I ask in the first place is that it seems to be reproducible behavior, certain iso images come out 2048 bytes short, even on repeated burns, but all burned CD-Rs are under themselves identical. Also what is the reason behind the: dd: reading `/dev/cdrom': Input/output error As it happens always, I assume it is normal, but what is the technical reason behind it? I assume CDs don't allow the device to detect the size directly, so dd reads till it encounters the end the hard way. Edit: User karol on superusers.com mentioned that both the size issue and the read error are the result of using -tao (default) in wodim instead of -dao mode. I couldn't yet test it, but it sounds like the most plausible explanation so far.

    Read the article

  • Tool to maintain/keep track of filesystem content integrity?

    - by Jesse
    I'm looking for a tool to maintain the integrity of a filesystem and it's contents using checksums. Effectively storing a list of checksums/filename pairs somewhere on the filesystem in a way that can be verified later if files are somehow damaged or lost. Git does what I want, but because it stores the contents of every file in it's object database, the disk usage will at least double. And the fact that it does not provide a progress bar when scanning files tells me it was not designed for the multi-terabyte filesystem I have in mind. I can do this crudely by storing the output of md5deep, but is there a tool specifically designed for this purpose, using whatever smarts possible to make the process efficient?

    Read the article

  • A better way to encourage contributions to OSS

    - by Daniel Cazzulino
    Currently in the .NET world, most OSS projects are available via a NuGet package. Users have a very easy path towards *using* the project right away. But let’s say they encounter some isssue (maybe a bug, maybe a potential improvement) with the library. At this point, going from user to contributor (of a fix, or a good bug repro or even a spike for a new feature) is a very steep and non trivial multi-step process of registering with some open source hosting site (codeplex, github, bitbucket, etc.), learning how to grab the latest sources, build the project, formulate a patch (or fork the code), learn the source control software they use (mercurial, git, svn, tfs), install whatever tools are needed for it, read about the contributors workflow for the project (do you fork &amp; send pull requests? do you just send a patch file? do you just send a snippet? a unit test? etc.), and on, and on, and on. Granted, you may be lucky and already know the source control system the project uses, but in really, I’d say the chances are pretty low. I believe most developers *using* OSS are far from familiar with them, much less with contributing back to various projects. We OSS devs like to be on the cutting edge all the time, ya’ know, always jumping on the new SCC system, the new hosting site, the new agile way of managing work items, bug tracking, code reviews, etc. etc. etc.. But most of our OSS users are largely the “... Read full article

    Read the article

  • Alt-Tab looses focus and have to hit Alt-Grave Accent to get focus

    - by John Hamill
    Alt-Tab looses focus and have to hit Alt-Grave Accent to get focus I have ubuntu 12.4 with Unity window manager. I have a gvim window and a firefox window open. I hit Alt-Tab to switch between the two. Sometimes the gvim window doesn't have focus and I have to hit Alt-GraveAccent (Alt-`) to get the gvim window to have focus (ie: have the cursor a solid white square instead of a outline of a square) I do this to move between firefox where I highlight some text and do a copy, then Alt-Tab to gvim and do a paste. Sometimes the focus isn't in gvim and the paste doesn't work. I then have to do an Alt-graveAccent to get the focus into gvim or click the gvim window. These extra steps slow my process down and it makes it difficult to get into a smooth rythum. I saw this: ALT+TAB loses focus Maybe the Alt-GraveAccent may help someone. It's a unity bug: https://bugs.launchpad.net/ubuntu/+source/unity/+bug/1035628 Your best bet is to wait until an update comes through fixing it.

    Read the article

  • Should one generally develop a client library for REST services to help prevent API breakages?

    - by BestPractices
    We have a project where UI code will be developed by the same team but in a different language (Python/Django) from the services layer (REST/Java). The code for each layer exits in different code repositories and which can follow different release cycles. I'm trying to come up with a process that will prevent/reduce breaking changes in the services layer from the perspective of the UI layer. I've thought to write integration tests at the UI layer level that we'll run whenever we build the UI or the services layer (we're using Jenkins as our CI tool to build the code which is in two Git repos) and if there are failures then something in the services layer broke and the commit is not accepted. Would it also be a good idea (is it a best practice?) to have the developer of the services layer create and maintain a client library for the REST service that exists in the UI layer that they will update whenever there is a breaking change in their Service API? Conceivably, we would then have the advantage of a statically-typed API that the UI code builds against. If the client library API changes, then the UI code won't compile (so we'll know sooner that there was a breaking change). I'd also still run the integration tests upon building the UI or services layer to further validate that the integration between UI and the service(s) still works.

    Read the article

  • Applescript to connect to bluetooth device

    - by Mark117
    I'm trying to create an applescript to allow me to connect to a bluetooth device by it's Bluetooth ID. So far, i've managed to get an applescript to turn on bluetooth if it's off. Here's the code: # This is only necessary, if AppleScripts are not yet allowed to change checkboxes tell application "System Events" to set UI elements enabled to true # Now change the bluetooth status tell application "System Preferences" set current pane to pane id "com.apple.preferences.bluetooth" tell application "System Events" tell process "System Preferences" # Enabled is checkbox number 2 if value of checkbox 2 of window "Bluetooth" is 0 then click checkbox 2 of window "Bluetooth" end if end tell end tell quit end tell Would someone know if and how it's possible to set up a new bluetooth device and if it'd be posible to connect to a device based on it's device name/ it's device bluetooth ID? I've also tried to record the action in Automator but for the "set up new device" option, Automator just tells me: "click on "" button". Thanks

    Read the article

  • Windows: Running an AutoIt script to launch a GUI app - on a server, when no one is logged in

    - by mrled
    I want to run an AutoIt script every day at 1:00 AM on a Windows 2003 Server Standard Edition. Since this is a server, obviously there is rarely someone sitting there logged in at the console, so the procedure needs to account for this. The AutoIt script in question launches and sends keypresses to a GUI app, so the process needs to include creating some sort of session for the user running the schedule task. Is there a way to do this? I can't just use scheduled tasks run the AutoIt script when no one is logged in - if I do, it fails to launch at all. I thought that I might be able to create an RDP session and run the scheduled task as that user, inside that session, but I haven't found a way to create an RDP session without launching mstsc.exe -- which is itself a GUI app, and I have the same problem again.

    Read the article

  • Here's your chance: MOS Feedback Sessions @OOW

    - by cwarticki
    Bring your questions, comments, concerns, opinions, recommendations, enhancement requests and any emotional outbursts!   As I travel the world and speak to thousands of customers, I receive plenty of feedback about My Oracle support.  Come hear directly from the source. Meet Dennis Reno, VP of Customer Portal Experience. The Customer Portal Experience team will host a My Oracle Support Tips and Techniques session and three roundtable feedback sessions at this year’s Oracle OpenWorld. The sessions will include a Hardware Support component, as well as best practices that are sure to benefit all My Oracle Support users. The events planned will give our users the opportunity to learn more about how the My Oracle Support customer portal adds value to the support process and to their business needs. The roundtable feedback sessions will allow customers to meet, give feedback, and share their experiences directly with the team responsible for the customer portal experience. Date Time (PT) Session Name Mon, Oct 1 01:45 PM My Oracle Support: Tips and Techniques for Getting the Best Hardware Support Possible (Session #CON9745) Tue, Oct 2 11:00 AM Roundtable - My Oracle Support General Feedback Wed, Oct 3 11:00 AM Roundtable - My Oracle Support Community Feedback Thr, Oct 4 11:00 AM Roundtable - My Oracle Support General Feedback Customers can find more information, including specific details about how to attend, by accessing My Oracle Support at OpenWorld (Article ID 1484508.1). Enjoy OpenWorld everyone! -Chris Warticki Global Customer Management

    Read the article

  • Oracle Enterprise Manager 12c Configuration Best Practices (Part 3 of 3)

    - by Bethany Lapaglia
    <span id="XinhaEditingPostion"></span>&amp;lt;span id=&amp;quot;XinhaEditingPostion&amp;quot;&amp;gt;&amp;lt;/span&amp;gt;&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;lt;span id=&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;quot;XinhaEditingPostion&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;quot;&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;gt;&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;lt;/span&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;gt; This is part 3 of a three-part blog series that summarizes the most commonly implemented configuration changes to improve performance and operation of a large Enterprise Manager 12c environment. A “large” environment is categorized by the number of agents, targets and users. See the Oracle Enterprise Manager Cloud Control Advanced Installation and Configuration Guide chapter on Sizing for more details on sizing your environment properly. Part 1 of this series covered recommended configuration changes for the OMS and Repository Part 2 covered recommended changes for the Weblogic server Part 3 covers general configuration recommendations and a few known issues The entire series can be found in the My Oracle Support note titled Oracle Enterprise Manager 12c Configuration Best Practices [1553342.1]. Configuration Recommendations Configure E-Mail Notifications for EM related Alerts In some environments, the notifications for events for different target types may be sent to different support teams (i.e. notifications on host targets may be sent to a platform support team). However, the EM application administrators should be well informed of any alerts or problems seen on the EM infrastructure components. Recommendation: Create a new Incident rule for monitoring all EM components and setup the notifications to be sent to the EM administrator(s). The notification methods available can create or update an incident, send an email or forward to an event connector. To setup the incident rule set follow the steps below. Note that each individual rule in the rule set can have different actions configured. 1.  To create an incident rule for monitoring the EM components, click on Setup / Incidents / Incident Rules. On the All Enterprise Rules page, click on the out-of-box rule called “Incident management Ruleset for all targets” and then click on the Actions drop down list and select “Create Like Rule Set…” 2. For the rule set name, enter a name such as MTM Ruleset. Under the Targets tab, select “All targets of types” and select “OMS and Repository” from the drop down list. This target type contains all of the key EM components (OMS servers, repository, domains, etc.) 3. Click on the Rules tab. To edit a rule, click on the rule name and click on Edit as seen below 4. Modify the following rules: a. Incident creation Rule for metric alerts i. Leave the Type set as is but change the Severity to add Warning by clicking on the drop down list and selecting “Warning”. Click Next. ii.  Add or modify the actions as required (i.e. add email notifications). Click Continue and then click Next. iii. Leave the Name and description the same and click Next. iv. Click Continue on the Review page. b. Incident creation Rule for target unreachable. i.   Leave the Type set as is but change the Target type to add OMS and Repository by clicking on the drop down list selecting “OMS and Repository”. Click Next. ii.  Add or modify the actions as required (i.e. add email notifications) Click Continue and then click Next. iii. Leave the Name and description the same and click Next. iv. Click Continue on the Review page. 5.  Modify the actions for any other rule as required and be sure to click the “Save” push button to save the rule set or all changes will be lost. Configure Out-of-Band Notifications for EM Agent Out-of-Band notifications act as a backup when there’s a complete EM outage or a repository database issue. This is configured on the agent of the OMS server and can be used to send emails or execute another script that would create a trouble ticket. It will send notifications about the following issues: • Repository Database down • All OMS are down • Repository side collection job that is broken or has an invalid schedule • Notification job that is broken or has an invalid schedule Recommendation: To setup Out-of-Band Notifications, refer to the MOS note “How To Setup Out Of Bound Email Notification In 12c” (Doc ID 1472854.1) Modify the Performance Test for the EM Console Service The EM Console Service has an out-of-box defined performance test that will be run to determine the status of this service. The test issues a request via an HTTP method to a specific URL. By default, the HTTP method used for this test is a GET but for performance reasons, should be changed to HEAD. The URL used for this request is set to point to a specific OMS server by default. If a multi-OMS system has been implemented and the OMS servers are behind a load balancer, then the URL in this section must be modified to point to the load balancer name instead of a specific server name. If this is not done and a portion of the infrastructure is down then the EM Console Service will show down as this test will fail. Recommendation: Modify the HTTP Method for the EM Console Service test and the URL if required following the detailed steps below. 1.  To create an incident rule for monitoring the EM components, click on Targets / Services. From the list of services, click on the EM Console Service. 2. On the EM Console Service page, click on the Test Performance tab. 3.  At the bottom of the page, click on the Web Transaction test called EM Console Service Test 4.  Click on the Service Tests and Beacons breadcrumb near the top of the page. 5.  Under the Service Tests section, make sure the EM Console Service Test is selected and click on the Edit push button. 6.  Under the Transaction section, make sure the Access Logout page transaction is selected and click on the Edit push button 7) Under the Request section, change the HTTP Method from the default of GET to the recommended value of HEAD. The URL in this section must be modified to point to the load balancer name instead of a specific server name if multi-OMSes have been implemented. Check for Known Issues Job Purge Repository Job is Shown as Down This issue is caused after upgrading EM from 12c to 12cR2. On the Repository page under Setup ? Manage Cloud Control ? Repository, the job called “Job Purge” is shown as down and the Next Scheduled Run is blank. Also, repvfy reports that this is a missing DBMS_SCHEDULER job. Recommendation: In EM 12cR2, the apply_purge_policies have been moved from the MGMT_JOB_ENGINE package to the EM_JOB_PURGE package. To remove this error, execute the commands below: $ repvfy verify core -test 2 -fix To confirm that the issue resolved, execute $ repvfy verify core -test 2 It can also be verified by refreshing the Job Service page in EM and check the status of the job, it should now be Up. Configure the Listener Targets in EM with the Listener Password (where required) EM will report this error every time it is encountered in the listener log file. In a RAC environment, typically the grid home and rdbms homes are owned by different OS users. The listener always runs from the grid home. Only the listener process owner can query or change the listener properties. The listener uses a password to allow other OS users (ex. the agent user) to query the listener process for parameters. EM has a default listener target metric that will query these properties. If the agent is not permitted to do this, the TNS incident (TNS-1190) will be logged in the listener’s log file. This means that the listener targets in EM also need to have this password set. Not doing so will cause many TNS incidents (TNS-1190). Below is a sample of this error from the listener log file: Recommendation: Set a listener password and include it in the configuration of the listener targets in EM For steps on setting the listener passwords, see MOS notes: 260986.1 , 427422.1

    Read the article

< Previous Page | 551 552 553 554 555 556 557 558 559 560 561 562  | Next Page >