Search Results

Search found 22951 results on 919 pages for 'debug build'.

Page 557/919 | < Previous Page | 553 554 555 556 557 558 559 560 561 562 563 564  | Next Page >

  • DVD-ROM disappeared under Windows-7

    - by hometoast
    Windows-7 (build 7100) has forgotten about and refused to recognize that I have an optical drive attached. Linux LiveCD sees it (sees it and it boots from it), so it's isolated to the Windows installation. I do have VirtualCloneDrive installed. But I know I had access to the optical drive after the installation of that. Only recently did I try to rip an iso image for mounting in a VM. I do not see the device under device manager (Start,Run,"devmgmt.msc"). I really do not want to do a fresh install. What are my next steps?

    Read the article

  • RAID5 on SmartArray P410i online resize

    - by datacompboy
    I have P410i+256M Cache without battery backup. My RAID5 was build over 3*136GB disks, now all disks were replaced to a 3*300GB array. How can I extend it to use the whole space? HPacucli doesn't allows that, I think this might be because no battery is present. I have a redundant power supply. All data is mirrored over DRBD to a secondary server, so I can try to resize with a chance of loss of data in case of power failure, but I prefer to have an online resize.

    Read the article

  • Perform shell operation through secure shell

    - by Ben
    Is it possible to perform a shell operation from a bash script through a secure shell. Here is an example of why you may want to do this. Lets say you have a simple unix operating system that you need only build and run on, but you want to do all of the development on another machine. I want to write a bash script that has the following functionality: scp file to location on other machine ssh to other machine cd into correct directory make run program scp results to file on original computer exit ssh Is this remotely possible? (Pardon the Pun :p)

    Read the article

  • fix vmware workstation 9 installation in ubuntu 12.10

    - by Alessandro Belloni
    i have opened this thread because i upgraded to ubuntu 12.10 beta (kernel 3.5) and i have problem with vmware workstation 9: "Unable to change virtual machine power state: Cannot find a valid peer process to connect to" does anyone got the same problem? Clean install of ubuntu 12.10 (daily build) installed vmware 9 and patched but not working, my laptop is a Lenovo T420 with Nvidia Optimus Technology. i can't patch correctly and get the thinks be builded correctly, my configuration is ubuntu 12.10 fresh installation vmware workstation 9 fresh install on top of a lenovo thikpad t420 with nvidia optimus video card. have a problems.. this message is show whem i try to apply the patch.. # Stopping VMware services: VMware Authentication Daemon done At least one instance of VMware VMX is still running. Please stop all running instances of VMware VMX first. VMware Authentication Daemon done Unable to stop services # How can i stop the vmware services to apply the patch? This message is too show when i try to patch again # ./patch-modules_3.5.0.sh /usr/lib/vmware/modules/source/.patched found. You have already patched your sources. Exiting # But the vmware is not working, and i can’t unstall…

    Read the article

  • CodePlex Daily Summary for Saturday, October 26, 2013

    CodePlex Daily Summary for Saturday, October 26, 2013Popular ReleasesEvent-Based Components AppBuilder: AB3.AppDesigner.57.10: Iteration 57.10 (Redesign): Edit of wire points for complex wires with N points redesigned. Nice side effect because of new design: Now the related wire segment and arrow moves as well! Improved: WireDecoratorMoreTerra (Terraria World Viewer): MoreTerra 1.11.4: Release 1.11.4 =========== = Compatibility = =========== Updated to add the new tiles/walls in 1.2.1Gac Library -- C++ Utilities for GPU Accelerated GUI and Script: Gaclib 0.5.5.0: Gaclib.zip contains the following content GacUIDemo Demo solution and projects Public Source GacUI library Document HTML document. Please start at reference_gacui.html Content Necessary CSS/JPG files for document. Improvements to the previous release Add 1 demos Editor.Toolstrip.Document Added new features GuiDocumentViewer and GuiDocumentLabel is editable like an RichTextEdit control.Emptycanvas: Emptycanvas v21: Maintenant plusieurs lumières possibles.PowerShell App Deployment Toolkit: PowerShell App Deployment Toolkit v3.0.7: This is a bug fix release, containing some important fixes! Fixed issue where Session 0 was not detected correctly, resulting in issues when attempting to display a UI when none was allowed Fixed Installation Prompt and Installation Restart Prompt appearing when deploy mode was non-interactive or silent Fixed issue where defer prompt is displayed after force closing multiple applications Fixed issue executing blocked app execution dialog from UNC path (executed instead from local tempo...BlackJumboDog: Ver5.9.7: 2013.10.24 Ver5.9.7 (1)FTP???????、2?????????????shift-jis????????????? (2)????HTTP????、???????POST??????????????????CtrlAltStudio Viewer: CtrlAltStudio Viewer 1.1.0.34322 Alpha 4: This experimental release of the CtrlAltStudio Viewer includes the following significant features: Oculus Rift support. Stereoscopic 3D display support. Based on Firestorm viewer 4.4.2 codebase. For more details, see the release notes linked to below. Release notes: http://ctrlaltstudio.com/viewer/release-notes/1-1-0-34322-alpha-4 Support info: http://ctrlaltstudio.com/viewer/support Privacy policy: http://ctrlaltstudio.com/viewer/privacy Disclaimer: This software is not provided or sup...VsTortoise - a TortoiseSVN add-in for Microsoft Visual Studio: VsTortoise Build 32 Beta: Note: This release does not work with custom VsTortoise toolbars. These get removed every time when you shutdown Visual Studio. (#7940) This release has been tested with Visual Studio 2008, 2010, 2012 and 2013, using TortoiseSVN 1.6, 1.7 and 1.8. It should also still work with Visual Studio 2005, but I couldn't find anyone to test it in VS2005. Build 32 (beta) changelogNew: Added Visual Studio 2013 support New: Added Visual Studio 2012 support New: Added SVN 1.8 support New: Added 'Ch...ABCat: ABCat v.2.0.1a: ?????????? ???????? ? ?????????? ?????? ???? ??? Win7. ????????? ?????? ????????? ?? ???????. ????? ?????, ???? ????? ???????? ????????? ?????????? ????????? "?? ??????? ????? ???????????? ?????????? ??????...", ?? ?????????? ??????? ? ?????????? ?????? Microsoft SQL Ce ?? ????????? ??????: http://www.microsoft.com/en-us/download/details.aspx?id=17876. ???????? ?????? x64 ??? x86 ? ??????????? ?? ?????? ???????????? ???????. ??? ??????? ????????? ?? ?????????? ?????? Entity Framework, ? ???? ...NB_Store - Free DotNetNuke Ecommerce Catalog Module: NB_Store v2.3.8 Rel3: vv2.3.8 Rel3 updates the version number in the ManagerMenuDefault.xml. Simply update the version setting in the Back Office to 02.03.08 if you have already installed Rel2. v2.3.8 Is now DNN6 and DNN7 compatible NOTE: NB_Store v2.3.8 is NOT compatible with DNN5. SOURCE CODE : https://github.com/leedavi/NB_Store (Source code has been moved to GitHub, due to issues with codeplex SVN and the inability to move easily to GIT on codeplex)patterns & practices: Data Access Guidance: Data Access Guidance 2013: This is the 2013 release of Data Access Guidance. The documentation for this RI is also available on MSDN: Data Access for Highly-Scalable Solutions: Using SQL, NoSQL, and Polyglot Persistence: http://msdn.microsoft.com/en-us/library/dn271399.aspxLINQ to Twitter: LINQ to Twitter v2.1.10: Supports .NET 3.5, .NET 4.0, .NET 4.5, Silverlight 4.0, Windows Phone 7.1, Windows Phone 8, Client Profile, Windows 8, and Windows Azure. 100% Twitter API coverage. Also supports Twitter API v1.1! Also on NuGet.Media Companion: Media Companion MC3.584b: IMDB changes fixed. Fixed* mc_com.exe - Fixed to using new profile entries. * Movie - fixed rename movie and folder if use foldername selected. * Movie - Alt Edit Movie, trailer url check if changed and confirm valid. * Movie - Fixed IMDB poster scraping * Movie - Fixed outline and Plot scraping, including removal of Hyperlink's. * Movie Poster refactoring, attempts to catch gdi+ errors Revision HistoryJayData -The unified data access library for JavaScript: JayData 1.3.4: JayData is a unified data access library for JavaScript to CRUD + Query data from different sources like WebAPI, OData, MongoDB, WebSQL, SQLite, HTML5 localStorage, Facebook or YQL. The library can be integrated with KendoUI, Angular.js, Knockout.js or Sencha Touch 2 and can be used on Node.js as well. See it in action in this 6 minutes video KendoUI examples: JayData example site Examples for map integration JayData example site What's new in JayData 1.3.4 For detailed release notes check ...TerrariViewer: TerrariViewer v7.2 [Terraria Inventory Editor]: Added "Check for Update" button Hopefully fixed Windows XP issue You can now backspace in Item stack fieldsSimple Injector: Simple Injector v2.3.6: This patch releases fixes one bug concerning resolving open generic types that contain nested generic type arguments. Nested generic types were handled incorrectly in certain cases. This affects RegisterOpenGeneric and RegisterDecorator. (work item 20332)Virtual Wifi Hotspot for Windows 7 & 8: Virtual Router Plus 2.6.0: Virtual Router Plus 2.6.0Fast YouTube Downloader: Fast YouTube Downloader 2.3.0: Fast YouTube DownloaderMagick.NET: Magick.NET 6.8.7.101: Magick.NET linked with ImageMagick 6.8.7.1. Breaking changes: - Renamed Matrix classes: MatrixColor = ColorMatrix and MatrixConvolve = ConvolveMatrix. - Renamed Depth method with Channels parameter to BitDepth and changed the other method into a property.VidCoder: 1.5.9 Beta: Added Rip DVD and Rip Blu-ray AutoPlay actions for Windows: now you can have VidCoder start up and scan a disc when you insert it. Go to Start -> AutoPlay to set it up. Added error message for Windows XP users rather than letting it crash. Removed "quality" preset from list for QSV as it currently doesn't offer much improvement. Changed installer to ignore version number when copying files over. Should reduce the chances of a bug from me forgetting to increment a version number. Fixed ...New ProjectsASP.NET Web 2.0 Project: This is a project for a simple ASP.NET page that takes in two numbers and displays their sum - part of practical work for online MSc course, Herts University.CJQ: Internet information collectorCppUtility: Originally Function and Bind to make more people could be aware, then became CppUtility, a supplement to the existing STL library.DruDot CMS: The Project is a attempt to create a .Net CMS in parallel line to Drupal in PHP EventBrokR (Event broker): Event Broker - Publish and Take asynchronous event from multiple consumersHP Agile Management Lite: HP Agile Management LiteJohnny's Web Browser: wb aka Johnny's Web Browser is a free and open source web-browser that implement .NET framework classes only. Works with all Windows version with .NET frameworkKingSurvival: King Survival Game - examples for High-Quality Programming Code and Spaghetti codeNow We're Talking - BizTalk automated testing framework: The NWT framework for BizTalk allows developpers to automate testing of business processes, based on detailed scenarios.Pescar2013Shop: Proyecto basico de electrodomesticos.Pescar2013ShopLucasEzequielAyrton: asdasdasdasdsdadPescar2013Shop-MatiasyMaru: Página web de electrodomésticos.ProConfig: This is a project for Professional Project Configuration, which is based on .NET reflection.Regional Map for AWS / Amazon Cloud VPC: RegionalMap for Amazon Web Services creates an graphical overview of your VPC configuration of a region. Sams Simple Calculator: Sams Simple CalculatorSharePoint 2013 - Set App Master Page: Simple powershell script for setting a SharePoint 2013 app master page urlSimpleParser: Simple one pass parser that finds a words in text.SudokuConsoleApp: Sample C# console application solving sudoku with recursive algorithm.Team[ORC]: Simple Web Application Movies RoomTFS Event Manager: Allows you to manage Team Foundation Server event subscriptions as well as help troubleshoot event job processing.Wechat Dot Net: .NET based utility for Wechat platformWindows Phone Title Localization Tool: Windows Phone Tile Localization Tool is a Visual Studio extension that helps to generate and manage title and tile title resource dllsWPF TextBox provides only digits input: You can select what type of input you need - normal, only digits or digits with decimal point.wsscMarvelHeroes2013: This is the project related to module Web Scripting and Application Development, a web 2.0 site about Marvel's superheroes.

    Read the article

  • About to smash my keyboard!! Ubuntu 13.1 issues with AMD driver & Audio

    - by DNex
    Let me preface with saying that this is my 2nd day on Linux. I really want to make it work but these issues are driving me up the wall! I've done exhaustive google searches but have not been able to figure anything out. I am on Ubuntu 13.10, my graphics card is AMD Radeon HD4200. My sound card is a realtek HDMI. I've tried downloading and installing both drivers but nothing works. Graphics card: When I run the .run file (from http://www2.ati.com/drivers/legacy/amd-driver-installer-catalyst-13.1-legacy-linux-x86.x86_64.zip) I get an error. I check the fglrx-install log and it says this: Check if system has the tools required for installation. fglrx installation requires that the system have kernel headers. /lib/modules/3.11.0-12-generic/build/include/linux/version.h cannot be found on this system. One or more tools required for installation cannot be found on the system. Install the required tools before installing the fglrx driver. Optionally, run the installer with --force option to install without the tools. Forcing install will disable AMD hardware acceleration and may make your system unstable. Not recommended. Audio: Since my first install I've had no audio. I've tried everything outlined in this site: http://itsfoss.com/fix-sound-ubuntu-1304-quick-tip/ to no avail. I've download the linux drivers from Realtek HDMI audio but have had no luck. Any help would be extremely appreciated.

    Read the article

  • Can One Get a Solid Programming Foundation Without Going To College/University?

    - by Daniel
    First, I have already searched the site and read all the previous "self-taught vs. college" topics. The majority of the answers defended that going to college was the best choice, for two main reasons: Going to college gives you the paper, which is essential to landing jobs, especially in tough economic times. Going to college gives you a solid programming base, teaching you the principles that will be essential regardless of the language/path you take after. Here comes my question: I am not worried about reason 1 at all, because I already have my own company (I build websites/ do affiliate marketing) and a stable financial situation, so I am pretty sure I won't need to look around for a job. I am worried about reason 2 though. That is, I want to make sure I'll have as solid a programming foundation as anyone else out there, and I am wondering if that is possible with self-learning. Suppose I take my time to study the very basics, like discrete maths, algorithm design, programming logic, computer architecture, Assembly, C programming, databases and data structures - mostly using books,online resources and lots of coding. Say I spend 1-2 years covering those basics. Do you think my foundation would be solid, or still lack in comparison to someone who went to college?

    Read the article

  • Open-source training class/room/instructor resource management software?

    - by Kyle Eli
    We're looking to replace an internal system used for managing training classes with something a bit more robust. Needs to be open-source or have a license level that grants access to source, and needs to be ASP.net (C# preferred, but could live with VB.net) Ultimately, we'll need to be able to assign facilities and instructors, manage attendees, send notifications, and build calendar views. We'll also be integrating with our website to allow on-line sign-up and other things for attendees to manage on their own. We do expect to implement quite a bit of it in-house, but we'd like as broad of a base to start from as we can get. Still, just a really good web-based meeting-room reservation system might make a good enough starting point. In list form: Meeting/training resource management softwareASP.net (C# or VB.net)Source availableWe're expecting to have to modify the software to meet all of our requirements

    Read the article

  • Visual Studio Agents 2012 on Server 2003 SP2

    - by Corith Malin
    I'm attempting to build out our Lab Manager with TFS 2012. On a virtual machine running Server 2003 SP2 32bit, I'm attempting to install the Visual Studio Agents 2012 and am running into an error: Setup Failed! Install cannot continue because some required components failed. Microsoft .NET Framework 4.5 Asia Looking into it, the install log is erroring when it's attempting to install dotNetFx45_Full_x86_x64.exe component. Looking at that install log, it is failing with: The .NET Framework 4.5 is not supported on this operating system. So, I see according to the Agents 2012 MSDN documentation, that Server 2003 SP2 is supported by Agents 2012. But I also see that according to the .NET 4.5 MSDN documentation, Server 2003 isn't supported. So how do I install Agents 2012 on 2003 SP2 as the documentation implies I can?

    Read the article

  • Some Mac applications crash frequently, with "__THE_SYSTEM_HAS_NO_PORT_SETS_AVAILABLE__" in backtrace

    - by smokris
    Recently I'm finding that some Mac OS X applications are crashing frequently with backtraces like the following: Process: Mail [39226] Path: /Applications/Mail.app/Contents/MacOS/Mail Identifier: com.apple.mail Version: 4.4 (1082) Build Info: Mail-10820000~1 Code Type: X86-64 (Native) Parent Process: launchd [338] Date/Time: 2011-01-12 21:59:48.383 -0500 OS Version: Mac OS X 10.6.6 (10J567) Report Version: 6 Exception Type: EXC_BREAKPOINT (SIGTRAP) Exception Codes: 0x0000000000000002, 0x0000000000000000 Crashed Thread: 12 Dispatch queue: com.apple.root.default-priority [...] Thread 12 Crashed: Dispatch queue: com.apple.root.default-priority 0 com.apple.CoreFoundation 0x00007fff81653975 __THE_SYSTEM_HAS_NO_PORT_SETS_AVAILABLE__ + 5 1 com.apple.CoreFoundation 0x00007fff815a1f69 __CFRunLoopFindMode + 553 2 com.apple.CoreFoundation 0x00007fff815a1c5d __CFRunLoopCreate + 317 3 com.apple.CoreFoundation 0x00007fff815a1a78 _CFRunLoopGet0 + 744 4 com.apple.CoreFoundation 0x00007fff815dc90a CFRunLoopRunInMode + 58 5 com.apple.MessageFramework 0x00007fff81d01183 +[NSRunLoop(MessageExtensions) _flushQueuedEventsAddingSource:] + 120 6 com.apple.MessageFramework 0x00007fff81d010d2 +[NSRunLoop(MessageExtensions) flushQueuedEvents] + 36 7 com.apple.MessageFramework 0x00007fff81ce6515 -[_MFInvocationOperation main] + 275 8 com.apple.Foundation 0x00007fff83921de4 -[__NSOperationInternal start] + 681 9 com.apple.Foundation 0x00007fff83a00beb __doStart2 + 97 10 libSystem.B.dylib 0x00007fff801402c4 _dispatch_call_block_and_release + 15 11 libSystem.B.dylib 0x00007fff8011e831 _dispatch_worker_thread2 + 239 12 libSystem.B.dylib 0x00007fff8011e168 _pthread_wqthread + 353 13 libSystem.B.dylib 0x00007fff8011e005 start_wqthread + 13 [...] Any ideas about what might be causing this and/or how to remedy it?

    Read the article

  • How to fix audio/game stuttering in Google Chrome's Flash plug-in?

    - by Simon Belmont
    I'm having an issue. Windows XP, running the latest Chrome 23 build. I'm using Flash 11.5 built into Chrome (Pepper Flash). It runs horribly. Chrome 22 did not have this issue as far as I recall. What a shame. YouTube videos stutter badly and after a while, they begin to lag and lose sync with the video. I disabled Pepper Flash and tested HTML5 video in YouTube and it was smooth as glass. Additionally, certain Flash based games are almost unusable now. The plug-in is using 100% CPU and it lags horribly in these games. Google/Adobe, please fix this. I shouldn't have to disable the built-in Flash plug-in (with added sandboxing security) and use regular Flash to resolve this. Short of waiting for an update to Chrome, does anyone have a better solution to fixing this? I am all ears.

    Read the article

  • How to mount an external HDD?

    - by Slash
    I have Ubuntu Linux 12.04 version the latest right now.I want to mount an external HDD NTFS 1TB.I have followed many guides but still no success.The error I'm getting is this: Failed to read last sector (1953523119): Invalid argument HINTS: Either the volume is a RAID/LDM but it wasn't setup yet, or it was not setup correctly (e.g. by not using mdadm --build ...), or a wrong device is tried to be mounted, or the partition table is corrupt (partition is smaller than NTFS), or the NTFS boot sector is corrupt (NTFS size is not valid). Failed to mount '/dev/sdb1': Invalid argument The device '/dev/sdb1' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? Using Storage Device MAnager i get this error:Error mounting: mount exited with exit code 1: helper failed with: mount: only root can mount /dev/sdb1 on /media/Skliros_Diskos {external disk name} When I use sudo fdisk -l, this is the output: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e0bc6 Device Boot Start End Blocks Id System /dev/sda1 * 2048 618854399 309426176 83 Linux /dev/sda2 618856446 625141759 3142657 5 Extended /dev/sda5 618856448 625141759 3142656 82 Linux swap / Solaris Disk /dev/sdb: 1000.2 GB, 1000202043392 bytes 255 heads, 63 sectors/track, 121600 cylinders, total 1953519616 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0002093a Device Boot Start End Blocks Id System /dev/sdb1 2048 1953525167 976761560 7 HPFS/NTFS/exFAT

    Read the article

  • Packages not showing up in created APT repository

    - by David
    I created an APT repository using deb-scanpackages, and it seemed to go well. When I did a apt-get update on another server, the Packages.gz file was retrieved, and all seemed well - until I went to search for the packages contained in that repository (all packages are created locally). Several recommendations suggested reprepro; I tried that. Same result - except I had to rebuild the packages with the Priority and Section lines in the control file (nothing says this anywhere). The reprepro utility also generates a complicated directory structure which required rewriting the repository entry on the requesting server. I then found that the arch directory referenced i386 and not amd64 (which was requested by the requesting server). Is it possible that the AMD64 system isn't seeing packages compiled for i386? Searching the *Packages files in /var/lib/apt/lists show that the only packages for i386 are those I added (the other files are for the server - Ubuntu 10.04.2 LTS). The server the packages were built on is Ubuntu 10.04.2 LTS i686; the requesting server is x86_64. I found some discussion at the Debian AMD64FAQ but it claims to be obsolete. It makes mention of an extended syntax for repository listings for APT, and a command dpkg-subarchitecture - neither of which work on the local AMD64 server. Do I have to build two different sets of packages?

    Read the article

  • SOA Community Newsletter November 2012

    - by JuergenKress
    Dear SOA partner community member Too many different product from Oracle, no idea how do they fit together? Get a copy of the Oracle catalog, an excellent overview of the Oracle middleware portfolio. BPM is a key solution to this portfolio. To position BPM to your customers you can find many use case ideas in the paper BPM 11g Patterns and industry specific value propositions for Financial Services & Insurance & Retail. Many more Process Accelerators (11.1.1.6.2) have become available. It is an excellent demo and starting point for BPM projects. Our SOA Suite team published the most important OOW presentation at the OTN website. The Oracle SOA proactive support team is running a series of blog posts about SOA and JMS Introductory. To become an expert in SOA, Bob highlighted the latest list of SOA books. For OSB projects we recommend the EAIESB OSB poster. Thanks to all the experts who contributed and shared their SOA & BPM knowledge this month again. Please feel free to send us the link to your blog post via twitter @soacommunity: Undeploy multiple SOA composites with WLST or ANT by Danilo Schmiedel Fault Handling Slides and Q&A by Vennester Installing Oracle Event Processing 11g by Antoney Reynolds Expanding the Oracle Enterprise Repository with functional documentation by Marc Kuijpers Build Mobile App for E-Business Suite Using SOA Suite and ADF Mobile By Michelle Kimihira A brief note for customers running SOA Suite on AIX platforms By Christian ACM - Adaptive Case Management by Peter Paul BPM 11g - Dynamic Task Assignment with Multi-level Organization Units By Mark Foster Oracle Real User Experience Insight: Oracle's Approach to User Experience Hope to see you at the Middleware Day at UK Oracle User Group Conference 2012 in Birmingham. Jürgen Kress Oracle SOA & BPM Partner Adoption EMEA To read the newsletter please visit http://tinyurl.com/soanewsNovember2012 (OPN Account required) To become a member of the SOA Partner Community please register at http://www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: SOA Community newsletter,SOA Community,Oracle SOA,Oracle BPM,BPM Community,OPN,Jürgen Kress

    Read the article

  • SOA Community Newsletter November 2012

    - by JuergenKress
    Dear SOA partner community member Too many different product from Oracle, no idea how do they fit together? Get a copy of the Oracle catalog, an excellent overview of the Oracle middleware portfolio. BPM is a key solution to this portfolio. To position BPM to your customers you can find many use case ideas in the paper BPM 11g Patterns and industry specific value propositions for Financial Services & Insurance & Retail. Many more Process Accelerators (11.1.1.6.2) have become available. It is an excellent demo and starting point for BPM projects. Our SOA Suite team published the most important OOW presentation at the OTN website. The Oracle SOA proactive support team is running a series of blog posts about SOA and JMS Introductory. To become an expert in SOA, Bob highlighted the latest list of SOA books. For OSB projects we recommend the EAIESB OSB poster. Thanks to all the experts who contributed and shared their SOA & BPM knowledge this month again. Please feel free to send us the link to your blog post via twitter @soacommunity: Undeploy multiple SOA composites with WLST or ANT by Danilo Schmiedel Fault Handling Slides and Q&A by Vennester Installing Oracle Event Processing 11g by Antoney Reynolds Expanding the Oracle Enterprise Repository with functional documentation by Marc Kuijpers Build Mobile App for E-Business Suite Using SOA Suite and ADF Mobile By Michelle Kimihira A brief note for customers running SOA Suite on AIX platforms By Christian ACM - Adaptive Case Management by Peter Paul BPM 11g - Dynamic Task Assignment with Multi-level Organization Units By Mark Foster Oracle Real User Experience Insight: Oracle's Approach to User Experience Hope to see you at the Middleware Day at UK Oracle User Group Conference 2012 in Birmingham. Jürgen Kress Oracle SOA & BPM Partner Adoption EMEA To read the newsletter please visit http://tinyurl.com/soanewsNovember2012 (OPN Account required) To become a member of the SOA Partner Community please register at http://www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: SOA Community newsletter,SOA Community,Oracle SOA,Oracle BPM,BPM Community,OPN,Jürgen Kress

    Read the article

  • Github Project Wiki: separate page filename from page title

    - by Marko Apfel
    Starting Point In a former version of a project wiki on Github was a separation between the page filename and page title. So we build up our Wiki in a manner, that some well defined prefixes in the filename describe the overall context of the particular page. Sample: At the page themselves we used a title-tag on top of the page to get the title in the rendered HTML-page. Here “= Tabelle: Anhänge bzw. Attachments” for the page with filename “data+table+Attachment”. This was rendered as We see: there is a file “data+table+Attachment” and a title-tag “= Tabelle: Anhänge bzw. Attachments” as well as a rendering with the title “Tabelle: Anhänge bzw. Attachments”. This was fine. Problem Now the Github-Wiki uses the title of the page as the filename and vice versa. This ends up in a cluttered file system and also in suppressing titles in the page themselves. So this page renders to As we could see: the title tag “= Organisation: IT-Infrastruktur” is not more rendered. Instead the filename “organisation+IT Infrastructure” is choosen as the title for the page. That sucks. Solution I reported this by Github again and hope for a fix.

    Read the article

  • Why are all Linux commands broken after installing Perl?

    - by user115079
    I installed perl using following command: curl -L http://xrl.us/installperlnix | bash after that i run following command to create soft link ln -sf /usr/local/bin/perl /usr/bin/perl now I'm trying to run commands like dir, mkdir, ll, rm, vi but nothing seems to be working for me. also when i try to login into my shell i get following msg at startup: Last login: Wed Apr 4 21:50:12 2012 from x.y.z.ip -bash: perl: command not found please help. Here is system detail: cat /proc/version Linux version 2.6.18-274.18.1.el5.028stab098.1 (root@rhel5-build-x64) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Sat Feb 11 15:30:41 MSK 2012 cat /etc/issue CentOS 5.7 32 bit Kernel \r on an \m Don't know if perl was already installed or not. and now i can't check.

    Read the article

  • ATI Catalyst driver 12.8 is not using hardware acceleration on Precise

    - by Jack Wright
    I've been using Ubuntu and ATI Catalyst for years. On my clean install of Ubuntu 12.04 I've noticed that Catalyst 12.6 and then 12.8 are not actually using my HD5750 GPU for hardware acceleration - high CPU usage, zero GPU load. Everything installed correctly with no hassles, fglrxinfo and vainfo are correct as per this HowTo for Precise. I have an Ubuntu 10.04 with Catalyst 12.6 installation on the same hardware which does use the GPU - low CPU usage, high GPU load when transcodeing video files or playing video content. The VA-API drivers are not installed on the 10.04 build. They are not mentioned in this HowTo for Lucid. fgl_glxgears frame rates on Precise are a fifth of the rates on Lucid. LUCID jw@Kworld:~$ fgl_glxgears Using GLX_SGIX_pbuffer 16867 frames in 5.0 seconds = 3373.400 FPS 12523 frames in 5.0 seconds = 2504.600 FPS 13763 frames in 5.0 seconds = 2752.600 FPS PRECISE jw@NewWorld12:~$ fgl_glxgears Using GLX_SGIX_pbuffer 12905 frames in 5.0 seconds = 2581.000 FPS 3230 frames in 5.0 seconds = 646.000 FPS 517 frames in 5.0 seconds = 103.400 FPS 518 frames in 5.0 seconds = 103.600 FPS 6489 frames in 5.0 seconds = 1297.800 FPS This is glxgears running in fullscreen. In Lucid (10.04) I can't see the gears, they are spinning so fast, but in Precise (12.04) they are really sluggish. Has anyone else noticed a problem like this? Cheers, Jack.

    Read the article

  • BSOD 0x000000f4(Probably caused by : wininit.exe)

    - by vacuum
    I have BSOD with 0x000000f4 code. It appears when system is not loaded at all. No new hardware where intalled. Only nvidia drivers where updated 3 days ago and they are up to date for now(version 296.10). System Health Report(perfmon /report) shows nothing interesting(only complained on disabled UAC) System is on SSD disk(WDC SSC-D0064SC-2100 B) Dump Spec: OS Name Microsoft Windows 7 Ultimate Version 6.1.7601 Service Pack 1 Build 7601 System Manufacturer Gigabyte Technology Co., Ltd. System Model P31-DS3L System Type x64-based PC Processor Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz, 2534 Mhz, 2 Core(s), 2 Logical Processor(s) BIOS Version/Date Award Software International, Inc. F9, 10.07.2008 Any suggestions?

    Read the article

  • Why does Komodo edit not open files on doubleclick due to some path encoding error?

    - by gakera
    When I double click a file in finder to open in Komodo edit, it displays an error message saying it can't find the file and the path is displayed, but with wrong encoding, such that special characters such as "ó" and "ð" are displayed as some weird boxes. Screenshot: http://i51.tinypic.com/2qkleg4.jpg I'm running OSX Snow Leopard 10.6.4 and Komodo Edit version 5: "Komodo Edit, version 5.2.4, build 4343, platform macosx-x86. Built on Tue Dec 8 18:18:35 2009." When I drag the file into Komodo edit it opens just fine displaying the path correctly with "ó"s and all :P This doesn't happen if I right click the file in finder and select to open it with TextEdit or Word or (God forbid) MacVim - only when I select to open it in Komodo edit. This is annoying as all hell.

    Read the article

  • Building a Store Locator ASP.NET Application Using Google Maps API (Part 1)

    Over the past couple of months I've been working on a couple of projects that have used the free Google Maps API to add interactive maps and geocoding capabilities to ASP.NET websites. In a nutshell, the Google Maps API allow you to display maps on your website, to add markers onto the map, and to compute the latitude and longitude of an address, among many other tasks. With some Google Maps API experience under my belt, I decided it would be fun to implement a store locator feature and share it here on 4Guys. A store locator lets a visitor enter an address or postal code and then shows the nearby stores. Typically, store locators display the nearby stores on both a map and in a grid, along with the distance between the entered address and each store within the area. To see a store locator in action, check out the Wells Fargo store locator. This article is the first in a multi-part series that walks through how to add a store locator feature to your ASP.NET application. In this inaugural article, we'll build the database table to hold the store information. Next, we'll explore how to use the Google Maps API's geocoding feature to allow for flexible address entry and how to translate an address into latitude and longitude pairs. Armed with the latitude and longitude coordinates, we'll see how to retrieve nearby locations as well as how to compute the distance between the address entered by the visitor and the each nearby store. (A future installment will examine how to display a map showing the nearby stores.) Read on to learn more! Read More >Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Building a Store Locator ASP.NET Application Using Google Maps API (Part 1)

    Over the past couple of months I've been working on a couple of projects that have used the free Google Maps API to add interactive maps and geocoding capabilities to ASP.NET websites. In a nutshell, the Google Maps API allow you to display maps on your website, to add markers onto the map, and to compute the latitude and longitude of an address, among many other tasks. With some Google Maps API experience under my belt, I decided it would be fun to implement a store locator feature and share it here on 4Guys. A store locator lets a visitor enter an address or postal code and then shows the nearby stores. Typically, store locators display the nearby stores on both a map and in a grid, along with the distance between the entered address and each store within the area. To see a store locator in action, check out the Wells Fargo store locator. This article is the first in a multi-part series that walks through how to add a store locator feature to your ASP.NET application. In this inaugural article, we'll build the database table to hold the store information. Next, we'll explore how to use the Google Maps API's geocoding feature to allow for flexible address entry and how to translate an address into latitude and longitude pairs. Armed with the latitude and longitude coordinates, we'll see how to retrieve nearby locations as well as how to compute the distance between the address entered by the visitor and the each nearby store. (A future installment will examine how to display a map showing the nearby stores.) Read on to learn more! Read More >

    Read the article

  • Is there a "rigorous" method for choosing a database?

    - by Andrew Martin
    I'm not experienced with NoSQL, but one person on my team is calling for its use. I believe our data and its usage isn't optimal for a NoSQL implementation. However, my understanding is based off reading various threads on various websties. I'd like to get some stronger evidence as to who's correct. My question is therefore, "Is there a technique for estimating the performance and requirements of a certain database, that I could use to confirm or modify my intuitions?". Is there, for example, a good book for calculating the performance of equivalent MongoDB/MySQL schema? Is the only really reliable option to build the whole thing and take metrics?

    Read the article

  • Pythonic use of the isinstance function?

    - by Pace
    Whenever I find myself wanting to use the isinstance() function I usually know that I'm doing something wrong and end up changing my ways. However, in this case I think I have a valid use for it. I will use shapes to illustrate my point although I am not actually working with shapes. I am parsing XML configuration files that look like the following: <square> <width>7</width> </square> <rectangle> <width>5</width> <height>7</height> </rectangle> <circle> <radius>4</radius> </circle> For each element I create an instance of the Shape class and build up a list of Shape objects in a class called the ShapeContainer. Different parts of the rest of my application need to refer to the ShapeContainer to get certain shapes. Depending on what the code is doing it might need just rectangles, or it might operate on all quadrangles, or it might operate on all shapes. I have created the following function in the ShapeContainer class (the actual function uses a list comprehension but I have expanded it here for readability): def locate(self, shapeClass): result = [] for shape in self.__shapes: if isinstance(shape,shapeClass): result.append(shape) return result Is this a valid use of the isinstance function? Is there another way I can do this which might be more pythonic?

    Read the article

  • What does your Lisp workflow look like?

    - by Duncan Bayne
    I'm learning Lisp at the moment, coming from a language progression that is Locomotive BASIC - Z80 Assembler - Pascal - C - Perl - C# - Ruby. My approach is to simultaneously: write a simple web-scraper using SBCL, QuickLisp, closure-html, and drakma watch the SICP lectures I think this is working well; I'm developing good 'Lisp goggles', in that I can now read Lisp reasonably easily. I'm also getting a feel for how the Lisp ecosystem works, e.g. Quicklisp for dependencies. What I'm really missing, though, is a sense of how a seasoned Lisper actually works. When I'm coding for .NET, I have Visual Studio set up with ReSharper and VisualSVN. I write tests, I implement, I refactor, I commit. Then when I'm done enough of that to complete a story, I write some AUATs. Then I kick off a Release build on TeamCity to push the new functionality out to the customer for testing & hopefully approval. If it's an app that needs an installer, I use either WiX or InnoSetup, obviously building the installer through the CI system. So, my question is: as an experienced Lisper, what does your workflow look like? Do you work mostly in the REPL, or in the editor? How do you do unit tests? Continuous integration? Packaging & deployment? When you sit down at your desk, steaming mug of coffee to one side and a framed photo of John McCarthy to the other, what is it that you do? Currently, I feel like I am getting to grips with Lisp coding, but not Lisp development ...

    Read the article

< Previous Page | 553 554 555 556 557 558 559 560 561 562 563 564  | Next Page >