Search Results

Search found 18475 results on 739 pages for 'non exist'.

Page 558/739 | < Previous Page | 554 555 556 557 558 559 560 561 562 563 564 565  | Next Page >

  • Unix sort 10x slower with keys specified

    - by KenFar
    My data: It's a 71 MB file with 1.5 million rows. It has 6 fields, four of which are strings of avg. 15 characters, two are integers. Three of the fields are sometimes empty. All six fields combine to form a unique key - and that's what I need to sort on. Sort statement: sort -t ',' -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 -k6,6 -o a_out.csv a_in.csv The problem: If I sort without keys, it takes 30 seconds. If I sort with keys, it takes 660 seconds. I need to sort with keys to keep this generic and useful for other files that have non-key fields as well. The 30 second timing is fine, but the 660 is a killer. I could theoretically move the temp directory to SSD, and/or split the file into 4 parts, sort them separately (in parallel) then merge the results, etc. But I'm hoping for something simpler since these results are so bad as-is. Any suggestions?

    Read the article

  • How to securely connect to multiple different LDAPS servers (Debian)

    - by Pickle
    I'm trying to connect to multiple different LDAPS servers. A lot of the documentation I've seen recommends setting TLS_REQCERT never, but that strikes me as horribly unsecure to not verify the certificate. So I've set that to demand. All the documentation I've seen says I need to update ldap.conf with a TLS_CACERT directive pointing to a .pem file. I've got that .pem file set up with the certificate from LDAP Server #1, and ldaps connections are happening fine. I've now got to communicate securely with another LDAP server in another branch of my organization, that uses a different certificate. I've seen no documentation on how to do this, except 1 page that says I can simply put multiple (not chained) certificates in the same .pem file. I've done this and everything is working hunky dorey. However, when I told a colleague what I did, he sounded like the sky was falling - putting 2 non-chained certificates into one .pem file is apparently the worst thing since ... ever. Is there a more acceptable way to do this? Or is this the only accepted way?

    Read the article

  • Scripted redirection for Outlook 2003

    - by John Gardeniers
    We have a staff member in sales who has gone onto a 4 day week (getting ready for retirement), so each Thursday afternoon her email needs to be forwarded to another user and each Friday afternoon it needs to be set back. I'm using the VBS script below to do this, run via the Task Scheduler. Although the script appears to do it's job, based on what I see when I view the user's Exchange settings, Exchange doesn't always recognise that the setting has changed. e.g. Last Thursday the forwarding was a enabled and worked correctly. On Friday the script did it's thing to clear the forwarding but Exchange continued to forward messages all weekend. I found that I can force Exchange to honour the changed setting be merely opening and closing the user's properties in ADUC. Of course I don't want to have to do that. Is there a non-manual way I can have Exchange read and honour the setting? The script (VBS): ' Call this script with the following parameters: ' ' SrcUser - The logon ID of the suer who's account is to be modified ' DstUser - The logon account of the person to who mail is to be forwarded ' Use "reset" to clear the email forwarding SrcUser = WScript.Arguments.Item(0) DstUser = WScript.Arguments.Item(1) SourceUser = SearchDistinguishedName(SrcUser) 'The user login name Set objUser = GetObject("LDAP://" & SourceUser) If DstUser = "reset" then objUser.PutEx 1, "altRecipient", "" Else ForwardTo = SearchDistinguishedName(DstUser)' The contact common name objUser.Put "AltRecipient", ForwardTo End If objUser.SetInfo Public Function SearchDistinguishedName(ByVal vSAN) Dim oRootDSE, oConnection, oCommand, oRecordSet Set oRootDSE = GetObject("LDAP://rootDSE") Set oConnection = CreateObject("ADODB.Connection") oConnection.Open "Provider=ADsDSOObject;" Set oCommand = CreateObject("ADODB.Command") oCommand.ActiveConnection = oConnection oCommand.CommandText = "<LDAP://" & oRootDSE.get("defaultNamingContext") & ">;(&(objectCategory=User)(samAccountName=" & vSAN & "));distinguishedName;subtree" Set oRecordSet = oCommand.Execute On Error Resume Next SearchDistinguishedName = oRecordSet.Fields("DistinguishedName") On Error GoTo 0 oConnection.Close Set oRecordSet = Nothing Set oCommand = Nothing Set oConnection = Nothing Set oRootDSE = Nothing End Function

    Read the article

  • Efficient mirroring of directories using hardlinks

    - by zoqaeski
    I'm backing up my music collection on to a number of NTFS-formatted external hard-drives; however, as I store my main collection in FLAC and have my library on my laptop as MP3s to save space, I want to be able to back up both sets, because mass conversion between formats is time-consuming. The "music" directory can contain any format; the "mp3s" directory contains only MP3s converted from files in the "music" directory. The music collection on the laptop contains only MP3s, but they come from both sources. When I backup my laptop's library to the "mp3s" directory, I want to only copy across MP3 files that don't exist in the "music" directory; those that do should be hard-linked to the "music" directory. All directories have an identical hierarchy, sorted by artist, album, date, discnumber if applicable, etc, and I use a tagging editor to ensure consistency across all these locations. I'm also using a Linux computer, but keeping the music collections on NTFS-formatted partitions so that they are readable by both Linux and Windows. At the moment, I use the following command to perform the backups, but this is time-consuming due to the expensive nature of finding hard links. rsync -avu --progress --relative --ignore-existing --link-dest=../music/ **/*.mp3 /media/ntfspocket/mp3s Is there a way to perform this backup more efficiently, taking advantage of the directory hierarchy?

    Read the article

  • Updating files with a Perforce trigger before submit [migrated]

    - by phantom-99w
    I understand that this question has, in essence, already been asked, but that question did not have an unequivocal answer, so please bear with me. Background: In my company, we use Perforce submission numbers as part of our versioning. Regardless of whether this is a correct method or not, that is how things are. Currently, many developers do separate submissions for code and documentation: first the code and then the documentation to update the client-facing docs with what the new version numbers should be. I would like to streamline this process. My thoughts are as follows: create a Perforce trigger (which runs on the server side) which scans the submitted documentation files (such as .txt) for a unique term (such as #####PERFORCE##CHANGELIST##NUMBER###ROFL###LOL###WHATEVER#####) and then replaces it with the value of what the change list would be when submitted. I already know how to determine this value. What I cannot figure out, is how or where to update the files. I have already determined that using the change-content trigger (whether possible or not), which "fire[s] after changelist creation and file transfer, but prior to committing the submit to the database", is the way to go. At this point the files need to exist somewhere on the server. How do I determine the (temporary?) location of these files from within, say, a Python script so that I can update or sed to replace the placeholder value with the intended value? The online documentation for Perforce which I have found so far have not been very explicit on whether this is possible or how the mechanics of a submission at this stage would work.

    Read the article

  • Managed LAMP platform for maximizing availability and global reach, not scalability

    - by user66819
    Assume a Linux/Apache/MySQL/PHP application for a small base of registered users. With small userbase, there are no traffic peaks so the scalability that cloud platforms offer is not imperative. But the system is mission-critical, so availability is the primary goal. Users are also distributed across Asia, Europe, and US, so multiple server locations that minimize users' network hops would be highly desirable. The dream: a managed VPS platform where we would configure a single server (uploading PHP and other files, manipulating database, etc.), and the platform would automatically mirror the server in a handful of key places around the world (say one on each US coast, one in Europe, one in east Asia). File system synchronization and MySQL replication would happen automatically. Core operating system is managed, so we don't need to do full system administration and security, and low-level backups are also done by service provider, though we also do our own backups as well. Couple this with some sort of DNS geo-detection, so users are routed to the nearest operational server... with support for https, of course. Does such a dream exist? If not, what are some approaches to accomplish the same end with minimal time investment and minimal monthly hosting costs?

    Read the article

  • saving data from a failing drive

    - by intuited
    An external 3½" HDD seems to be in danger of failing — it's making ticking sounds when idle. I've acquired a replacement drive, and want to know the best strategy to get the data off of the dubious drive with the best chance of saving as much as possible. There are some directories that are more important than others. However, I'm guessing that picking and choosing directories is going to reduce my chances of saving the whole thing. I would also have to mount it, dump a file listing, and then unmount it in order to be able to effectively prioritize directories. Adding in the fact that it's time-consuming to do this, I'm leaning away from this approach. I've considered just using dd, but I'm not sure how it would handle read errors or other problems that might prevent only certain parts of the data from being rescued, or which could be overcome with some retries, but not so many that they endanger other parts of the drive from being saved. I guess ideally it would do a single pass to get as much as possible and then go back to retry anything that was missed due to errors. Is it possible that copying more slowly — e.g. pausing every x MB/GB — would be better than just running the operation full tilt, for example to avoid any overheating issues? For the "where is your backup" crowd: this actually is my backup drive, but it also contains some non-critical and bulky stuff, like music, that aren't backups, i.e. aren't backed up. The drive has not exhibited any clear signs of failure other than this somewhat ominous sound. I did have to fsck a few errors recently — orphaned inodes, incorrect free blocks/inodes counts, inode bitmap differences, zero dtime on deleted inodes; about 20 errors in all. The filesystem of the partition is ext3.

    Read the article

  • How can I generate filesystem images that are usable on many different virtualization systems?

    - by Mark Longair
    I have written a script that generates a root filesystem image (based on Debian lenny) suitable for User-Mode Linux. (Essentially this script creates a filesystem image, mounts it with a loop device, uses debootstrap to create a lenny install, sets up a static IP for TUN/TAP networking, adds public keys for login by SSH and installs a web application.) These filesystem images work pretty well with UML, but it would be nice to be able to generate similar images that people can use on alternative virtualization software, and I'm not familiar with these options at all. In particular, since the idea is to use this image as a standalone server for testing the web application, it's important that the networking works. I wonder if anyone can suggest what would be involved in customizing such root filesystem images such that they could be used with other virtualization software, such as VMware, Xen or as an Amazon EC2 instance? Two particular concerns are: If such systems don't use a raw filesystem image (e.g. they need headers with metadata or are compressed in some particular way) do there exist tools to convert between the different formats? I assume that in the filesystem, at least /etc/network/interfaces will have to be customized, but are more involved changes likely to be necessary? Many thanks for any suggestions...

    Read the article

  • Unable to mount iso as dvd drive in VMware Fusion 6

    - by John O
    I have a newer iMac without an optical drive and some DVDs that I needed to run software off of. This software will have you juggle discs to read data off of them, and the data can't simply be copied to the machine's drive. I used a windows machine to make ISOs of these DVDs. And the first disc, the installer, it will mount in VMware and let you install the software. It then asks for the other discs, and these won't mount as ISOs. If I mount them as drive images, they'll show up on the iMac's and I have access to all the files. But if I try to mount them as the dvd drive through Fusion, nothing happens. For that matter, I'm unable to attempt it a second time, as Fusion believes that the there is already an iso mounted as the dvd, while nothing has happened as far as the guest OS is concerned. drutil eject will allow me to eject the ghost/non-existent dvd, at which point I can make a second (equally futile) attempt. Does anyone have an explanation for this behavior? How can the ISO be valid enough to mount as a drive image, but not valid enough for Fusion to mount it as if it were a dvd?

    Read the article

  • Expand a volume residing on one X-RAID disk installed on a Netgear ReadyNas Duo v2

    - by Sid
    I've got a Netgear ReadyNas Duo v2 (2 disk slots). System is configured with X-RAID which does not provide flexibility but automatically expands based on a sort of RAID-5 logic. I had 2 500 GB hard disk installed, redundant, so I had 500 GB of volume size. I wanted to upgrade the whole system to 3 GB * 2 hard disk maintaining both the data already on the NAS and the data on one of the two 3 TB hard disks. So I did this: Unplugged one disk from the ReadyNas. Now the readynas has 1*500 GB non redundant. Plugged one empty 3 TB hard disk. Now the readynas has 1*500 GB + 1*3 TB, redundant. I waited for the resync. I then unplugged the 500 GB hard disk, so that I have only the 3 TB hard disk with the previous data. Now what I want is to copy the data on my other 3 TB hard disk in the NAS, so that I can plug this other disk in the NAS and use it for redundancy. The problem is that: the NAS has the (single) 3 TB hard disk in X-RAID, but the volume does not expand to 3 TB, it remains fixed to 500 GB. Is there a way to tell the ReadyNas to force expanding the volume to the whole disk without plugging in another hard disk of the same size?

    Read the article

  • Fake demostration software for command line

    - by Joe
    I'm looking for some software that would be useful for giving demonstrations. I regularly have to show the effects of scrips ect to classes while talking about their effects, and equaly regularly I have finger trouble and have to rewrite various commands - wasting class time and general energy. I'd like to be able to record a sequence of commands in advance, and then play them back at the speed of my choosing. So I might have a file that containes the commands: echo "hello world!" ls ls -l ls -l | sort I'd like to be able to play these commands back by typing similar ones in. So I'd have a blinking command prompt and if I typed 'echo "hxxx' the command prompt would read home$echo "hell and if I typed any other letters the terminal would fill up with the remainder of the command until I press enter, when it executes the command. The point is that even if I screw up the command when typing it, the command that I'd prepared in advance would be executed. My question is - does similar software exist for giving demonstrations? or even, is this an easy thing to script up...? EDIT - two quick things first of all I'm on osx - but it would be nice to get a general solution for other people who arrive here from google. and second a lot of the comments/answers are concentrating on, in effect, making it fast and easy to enter long commands by means of hotkeys and the like. Actually I'd like it to at least look like I'm typing live - that's why I put in the bit about the one-to-one keymapping, but I don't think I explained that quite as well as I could have...

    Read the article

  • Does Google sometimes ignore "special" characters, possibly depending on your location or font type settings? [closed]

    - by RLH
    TLDR Google tends to ignore special characters in my search strings. Is there anything that I can do about it and is it, possibly, happening because Google makes certain assumptions based off of my default text-encoding settings and my location? I just posted this question over at StackOverflow. I had found a C preprocessor that I'd never seen before. As I should have done, I Googled it and tried to find out further information. I attempted various search terms which were all variations of "C Operator ##" (some times with and some times without the double-quotes.) Google didn't bring back anything of use so I posted my question on SO. As you can see from the comments, someone mentioned a search string (ironically one which I did try to search) and stated that I could have even hit the "I'm feeling lucky" button and have gotten my answer. The problem is I did search that, and the results that I received were far more basic and even after following the top results and searching the resulting pages, I could find nothing referencing the string "##". I'm not posting this question to complain but it does provide an empirical example of something I've seen before that really bugs me-- Google often ignores special characters in my search strings and the results are often useless. As a developer I often need to search for string values containing non-alphanumeric characters. Some characters (like the underscore or hyphen) can be used without trouble. However, other characters (such as the ampersand, carat, tilde and pound sign) are often ignored in my query strings. Is there a way to prevent this from happening so that I can get meaningful results from Google? NOTE I stay logged into Google and I live in the US. I wonder if Google detects some form of text-encoding setting or derives my results based off of certain, localized text-based assumptions. Regardless, I would like to for Google to search for what I give it. Is there anything that I can do to improve my results?

    Read the article

  • pam_ldap.so before pam_unix.so? Is it ever possible?

    - by user1075993
    we have a couple of servers with PAM+LDAP. The configuration is standard (see http://arthurdejong.org/nss-pam-ldapd/setup or http://wiki.debian.org/LDAP/PAM). For example, /etc/pam.d/common-auth contains: auth sufficient pam_unix.so nullok_secure auth requisite pam_succeed_if.so uid >= 1000 quiet auth sufficient pam_ldap.so use_first_pass auth requiered pam_deny.so And, of course, it works for both ldap and local users. But every login goes first to pam_unix.so, fails, and only then tries pam_ldap.so successfully. As a result, we have a well-known failure message for every single ldap user login: pam_unix(<some_service>:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=<some_host> user=<some_user> I have up to 60000 of such log messages per day and I want to change the configuration so, that PAM will try ldap authentication first, and only if it fails - try pam_unix.so (I think it can improve the i/o performance of the server). But if I change common-auth to the following: auth sufficient pam_ldap.so use_first_pass auth sufficient pam_unix.so nullok_secure auth requiered pam_deny.so Then I simply can't login anymore with local (non-ldap) user (e.g., via ssh). Does somebody knows the right configuration? Why Debian and nss-pam-ldapd have pam_unix.so at first by default? Is there really no way to change it? Thank you in advance. P.S. I don't want to disable logs, but want to set ldap authentication on the first place.

    Read the article

  • Custom attributes in Active Directory - determining usage/function and possible removal options?

    - by HopelessN00b
    I've bumped into a highly-customized Active Directory environment (2003 FL) that's got me wondering if there's any particularly easy way to figure out what a custom attribute's function is, and what, if anything, is "using" that particular attribute. And then what some good options for potentially removing custom attributes from the schema might be. Aside from a restore or starting from scratch. If such an option exists. For example, I think I can be fairly certain what the "isDumbass" attribute with a value of TRUE means, but not so much with "IRPextCONST", containing a value of 393684. Likewise, I'd think it should be pretty safe to delete the "isDumbass" attribute, but would like to a) be sure and b) find out what's querying or updating that value anyway, because I suspect that anything using that attribute might be next on the list of things to remove. Ideally, without having to run a search on the contents of every custom script and bit of source code I can get my hands on, of course. And finally, aside from rebuilding from scratch, or doing an authoritative AD restore from backups that don't exist... is there a way to delete a given custom attribute? (Not blank the value, but actually delete the attribute from the schema - some folks would rather not have attributes like "FaggotMeter" and "DouchebagCounter" hanging around.) I've been able to find and successfully test a method on Windows 2k, but it seems like Microsoft disabled this option in SP4, and the domain in question is a 2003 functional level.

    Read the article

  • How can I inject clips [ads] in a playlist every x minutes (even if previous clip is not over)

    - by azera
    Sorry for the title, I find it quite hard to describe what I want to do in a single sentence We have a few TV here linked to our computer, which we use to display clips about what we do in our sport center, what you should do to stay in good form ect ... It's running non stop, actually though vlc + playlist. Those main clips are 1-2 hours long and we have about 20 of them looping randomly all day. We would like to inject ads for some of our sponsiored products every now and then during the playlist, like say one ad every 15 minute. Does any one know how we can do that, while keeping the main clip random order ? I thought about encoding the whole thing as a single movie with ads inserted, but then it's not random. So we can put the ads in the playlist itself right ? Except clips are several hours long and we want that more often than that. Cutting the main clips in several pieces seems to work but that kind of sucks as new clips are made every month. If any one has an idea, thanks a lot

    Read the article

  • Throughput and why do ISPs sell too much bandwidth?

    - by jonescb
    I hope the question made sense how I worded it. :) I've been wondering, maximum theoretical bandwidth is measured as RWIN/RTT (Window size / round trip time) Source 1 and Souce 2 So if a major city only 100 miles away gives me a ping of 50ms, and I have the default 64kb TCP window size then my maximum throughput will be 12.5Mb/s. Everything further away would give me a higher ping and therefore a lower throughput. Is there any reason to buy something like FiOS with a 50Mb/s or greater connection? Will you ever be able to reach that kind of speed? I know you can increase the TCP window size to increase throughput, but it has to be at both ends which is a deal breaker because you can't control the server. I'm assuming other network protocols like UDP aren't quite as affected by latency as TCP is, but how much of overall network traffic does non-TCP make up vs TCP. Am I just misguided about how throughput works? But if the above is correct, then why should a consumer like me buy way more bandwidth than can be realistically used. Maybe the only reason is for downloading multiple things at once, or one thing from multiple servers/peers?

    Read the article

  • How to avoid en.voyages-sncf.com redirecting to uk.voyages-sncf.com?

    - by Mark Smith
    OK, so en.voyages-sncf.com is French Railways' English language website with full functionality for train booking in France - it sells iDTGV, offers seating options etc. uk.voyages-sncf.com is their UK subsidiary, with reduced functionality, no seat options, no iDTGV etc. Previously, I have been able to select 'Other countries (EUR)' top right and go from the uk version to the en version, or just type in the direct url 'en.voyages-sncf.com and go there. Now, they seem to have implemented an automatic redirect so whenever I enter 'en.voyages-sncf.com' on my UK-based PC or indeed try to select 'Other countries (EUR)' it automatically bumps me to uk.voyages-sncf.com, which I don't want. I can't get onto en.voyages-sncf at all. So, short of using a heavyweight solution like using a non-UK proxy server or downloading the TOR browser, is there any simple solution? Like telling my browser to go to en.voyages-sncf, go directly to en.voyages-sncf and no other site, do not pass go, do not collect £200, do not go anywhere else, ignore all redirects and do what you're told by ME, not by those Machiavellian so-and-sos?

    Read the article

  • cannot get mssql working with sql server 2005

    - by Ryan
    I'm a MySQL/Apache user, trying my hand with IIS and SQL server, so please, if this is a stupid question have patience. I'm using IIS version 7.5. PHP version 5.3.13 and SQL server 2005 IIS is running on port 90, not sure if that will make a difference or not. I know my sql server is running because I can explore/connect to it in Server management studio. I know php is configured properly, because //localhost:90/phpinfo.php works fine. I updated the php_msql.dll extension in phpinfo to: extension=ext/php_msql.dll EDIT- However, when I run phpinfo() under the "configure command" row, this is present: --without-mssql I found/downloaded the ntwdblib.dll and placed it in both sys32 and php root. All these things were supposed to fix the issue, and they haven't. This is the code I'm using, straight from php.net: <?php // Server in the this format: <computer>\<instance name> or // <server>,<port> when using a non default port number $server = 'localhost'; // Connect to MSSQL $link = mssql_connect($server, 'uname', 'pwd'); if (!$link) { die('Something went wrong while connecting to MSSQL'); } ?> obviously I'm using a real username and password, but when I load the file in my browser, I receive a 500 error. Upon checking the log, this is what is displayed: 2012-06-25 12:41:29 ::1 GET /test.php - 90 - ::1 Mozilla/5.0+(Windows+NT+6.1;+WOW64)+AppleWebKit/536.5+(KHTML,+like+Gecko)+Chrome/19.0.1084.56+Safari/536.5 500 0 0 5 That (to me) doesn't help me much. What am I doing wrong? Thank you

    Read the article

  • My Samsung R480 laptop freezes for short and inconsistent periods of time.

    - by anonymous
    I have a Samsung R480 laptop running Windows 7. It's great, I love it to death, but every so often it'll start having, for lack of a better term, "hiccups". It would freeze completely, emit a loud BZZZZZZT from the speakers (think when a video freezes and the sound gets stuck), then return to working order all in a span of 0.5~2 seconds. It has happened while I was playing Mass Effect, while I was watching both HD and non-HD videos, and while I was surfing the internet (which I've noticed while watching YouTube videos and playing Entanglement, but also noticed while using Facebook, minus the buzzing sound). My Initial hypothesis was that my GPU or CPU were overheating as it would shut down while playing Mass Effect, but when I turned off my WiFi card hardware using [fn + F9], the problem was resolved. As I currently see it, it could be a problem with my CPU, my WiFi card, or my sound card. It could also be a software related issue, possibly an ill-functioning process. It could be chrome related. A memory leak from chrome maybe? Does anyone know how to resolve this?

    Read the article

  • AT&T Filtering FTP traffic?

    - by xpda
    Using an AT&T DSL, I cannot ftp upload or ftp download a few files of a large 1500 set. The problem is the file name. I can change a few characters of the file name, and they upload fine. I can change the file names from upper to lower case and they upload fine. If I change back to the original file name, it will not upload again. When it doesn't upload, it starts, transfers about 5% of a 5-10 meg file, and then times out. I have uploaded one of the files under a different name, changed the name back to the original, and it will not download via ftp. It will download onto a browser, and it will ftp download just fine with a different name. It just will not download with ftp. I have reproduced this uploading to three different servers on 1and1 and Amazon EC2. When I try it on a non-AT&T ISP client, it works OK. Here is a file that did not upload until I had renamed it. (I have changed it back to the original name): "http://xpda.com/nautnew/11302 STOVER POINT TO PORT BROWNSVILLE SIDE A.png" This problem is unrelated to connection, speed, and file content. Only things I can see that makes a difference are the file name and ATT DSL. Does ATT have some kind of ftp file filtering? Is there anything else that could cause this behavior?

    Read the article

  • Issue with a secure login - Why am I being redirected to the insecure login?

    - by mstrmrvls
    Im having some issues getting a website working at my place of work. The issue was rasised when a "double login" occurred from the secure login site. The second login was actually being prompted by the HTTP domain and not HTTPS. In essence the situation is like this: The user navigates to https://mysite.com/something The login prompt pops up Enter username and password The user is presented with ANOTHER login prompt (IE will say its insecure, and the address bar reflects that) If the user puts in their password the insecure one, they will login to the insecure site. if they hit cancel it will present them with a 401 page Navigating back to https://somesite.com/something will by pass the login prompt and log them in to the secure site automatically (cookie maybe) I'm a bit confused to why the user isnt being logged in properly the first time (redirected to non-ssl) but any consecutive login will be okay? I've been trying to use fiddler to see what is happening after the user puts in their password the first time and trying to get fiddler to automatically login to the site (with no luck) I believe the website in question is using Basic Digest authentication. Thanks for any help

    Read the article

  • How to auto syncronize files with network drive on Windows XP?

    - by stephenmm
    Windows XP: I would like to auto synchronize files between a a local drive and a network drive. I am aware of Windows Briefcase but it is very slow and I have to tell it to synchronize. I really like the way Dropbox does there synchronization as it is almost instantaneous. It is very impressive. I would just use Dropbox but I cannot install it on the remote machine. Is there some tool or script I can create that will watch a particular folder for any changes and then sync those changes to the networked drive automatically and nearly instantaneously? CLARIFICATION: I would like this tool/script to to be a daemon that starts when windows starts and continually monitors a folder for any changes to its contents. Once it observes changes in the source or the destination it synchronizes the files that changed (Very similar to the way Dropbox works). I have a good idea about how I would do this in a Perl script and if a tool does not exist that does this I will write it myself in Perl. If someone has already done this can they share the script?

    Read the article

  • Sound doesn't work anymore after replacing RAM

    - by thejh
    Hello, today, I replaced one old RAM module with two newer, bigger ones, but now, the sound doesn't seem to work anymore. Already ran alsaconf and it didn't help. Output of lspci for the audio device: 00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1) Subsystem: Giga-byte Technology Device a002 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (500ns min, 1250ns max) Interrupt: pin A routed to IRQ 21 Region 0: Memory at f5100000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+ Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel The audio device is onboard and has six configurable outputs, two or so are also capable of being an input (if I remember it correctly), but I don't know how to control it under linux. Does somebody know how/whether replacing the RAM could be related to my problem and/or how to fix it?

    Read the article

  • Best solution top keep data secure

    - by mrwooster
    What is the simplest and most elegant way of storing a small amount of data in a reasonably secure way? I am not looking for ridiculous levels of advanced encryption (AES-256 is more than enough) and I am only looking to encrypt a small number of files. The files I wish to encrypt are mostly comprised of password lists and SSH keys for servers. Unfortunately it is impossible to keep track of ever changing passwords for my servers (and SSH keys) and so need to keep a list of the passwords. Obviously this list needs to be secure, and also portable (I work from multiple locations). At the moment, I use a 10MB encrypted disk image on my mac (std .dmg AES-256) and just mount it whenever I need access to the data. To my knowledge this is very secure and I am very happy using it. However, the data is not very portable. I would like to be able to access my data from other machines (especially ones running linux), and I am aware that there are quite a few issues trying to mount an encrypted .dmg on linux. An alternative I have considered is to create a tar archive containing the files and use gpg --symmetric to encrypt it, but this is not a very elegant solution as it requires gpg to be installed on every system. So, what over solutions exist, and which ones would you consider to be the most elegant? Ty

    Read the article

  • Samba access works with IP address only

    - by Sebastian Rittau
    I added a Debian etch host (hostname: webserver, IP address: 192.168.101.2) running Samba to a Windows network with a Windows 2003 PDC (IP address 192.168.101.3). The Samba server exports a public guest share, called "Intranet". The server shows up fine in the network, but trying to click on it produces an error dialog, stating I don't have the necessary permissions. So does entering \webserver manually and using \webserver\internet states that the path does not exist. Interestingly, accessing the share by IP address (\192.168.101.2 or \192.168.101.2\intranet) works fine. DNS is configured correctly, and "smbclient //webserver/intranet" on another Linux client works fine. One complicating issue is that the webserver is only a VMware virtual machine running on PDC server. Here is our smb.conf: [global] workgroup = Foobar server string = Webserver wins support = yes ; commenting out these wins server = 192.168.101.3 ; two lines has no effect dns proxy = no guest account = nobody [... snipped some unrelated bits, like logging ...] security = share [... snipped some password-related things ...] domain master = no [intranet] comment = Intranet path = /srv/webserver/contents browseable = yes guest ok = yes guest only = yes read only = yes create mask = 0775 directory mask = 0775

    Read the article

< Previous Page | 554 555 556 557 558 559 560 561 562 563 564 565  | Next Page >