Search Results

Search found 19788 results on 792 pages for 'remote host'.

Page 563/792 | < Previous Page | 559 560 561 562 563 564 565 566 567 568 569 570  | Next Page >

• ubuntu 12.10 Lenovo b570e, WiFi connected but not working

  - by koogee

  I'm running ubuntu 12.10 liveUSB on a lenovo b570e. It has an atheros wifi card that connects with my home network but I can't browse AT ALL. My network is multiple clients --> router --> isp modem --> Internet I can ping my router (192.168.0.1) but not my isp's modem(192.168.15.1). I have 3 other computers connected to the same router that are working fine (infact i'm posting from one) ping -c 3 google.com unknown host google.com ping -c 3 8.8.8.8 shows 100% packet loss I think its some networking issue. I tried directly connecting it to the router via ethernet cable but same issue. It gets an ip, shows LAN connected but can't browse. If I connect it directly to the isp modem via ethernet cable it starts working fine. Connection Information shows: Interface: 802.11 wifi (wlan0) driver: ath9k security: wpa/wpa2 speed: 150mb/s ip: 192.168.0.106 broadcast: 192.168.0.255 subnet:255.255.255.0 default route: 192.168.0.1 primary dns: 192.168.15.1 i have restarted the router and modem many times. Rebooted the LiveUSB many times.

  Read the article

• Password not working for sudo ("Authentication failure")

  - by Souta

  Before I mention anything further, DO NOT give me a response saying that terminal won't show password input. I'm AWARE of that. I'm typing my user password in (not a capslock issue), and for some reason it still says 'Authentication Failure'. Is there some other password (one I'm not aware of) I'm supposed to be using other than my user password? I've had this ubuntu before, on another hard drive and I didn't have this problem. (And it was the same ubuntu, ubuntu 12.04 LTS) ai@AiNekoYokai:~$ groups ai adm cdrom sudo dip plugdev lpadmin sambashare ai@AiNekoYokai:~$ lsb_release -rd Description: Ubuntu 12.04 LTS Release: 12.04 ai@AiNekoYokai:~$ pkexec cat /etc/sudoers # # This file MUST be edited with the 'visudo' command as root. # # Please consider adding local content in /etc/sudoers.d/ instead of # directly modifying this file. # # See the man page for details on how to write a sudoers file. # Defaults env_reset Defaults secure_path="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" # Host alias specification # User alias specification # Cmnd alias specification # User privilege specification root ALL=(ALL:ALL) ALL # Members of the admin group may gain root privileges %admin ALL=(ALL) ALL # Allow members of group sudo to execute any command %sudo ALL=(ALL:ALL) ALL # See sudoers(5) for more information on "#include" directives: #includedir /etc/sudoers.d I can log in with my password, but it's not accepted as valid for authentication <-- That is pretty much my issue. (Although, I haven't gone into recovery mode.) I've ran: ai@AiNekoYokai:~$ ls /etc/sudoers.d README And also reinstalled sudo with: pkexec apt-get update pkexec apt-get --purge --reinstall install sudo pkexec usermod -a -G admin $USER <- Says admin does not exist su $USER <- worked for me, however, my password still does not do much (in sense of not working for other things) I changed my password with pkexec passwd $USER. I was able to change it no problem. gksudo xclock was something I was able to get into, no problem. (Clock showed) ai@AiNekoYokai:~$ gksudo xclock

  Read the article

• Cannot establish ssh connection to computer on local network

  - by ovangle

  I've just (re)installed ubuntu 11.10 on my main pc, and the connection times out every time I try to ssh connect to my laptop (over the local network) to retrieve the files I backed up there. The connection times out every time I try to connect. I can establish a connection in the other direction without issue. Here's the verbose output I get when I try to connect: ovangle@ruby-EP43-DS3:~$ ssh -v [email protected] OpenSSH_5.8p1 Debian-7ubuntu1, OpenSSL 1.0.0e 6 Sep 2011 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 10.1.1.4 [10.1.1.4] port 22. debug1: connect to address 10.1.1.4 port 22: Connection timed out ssh: connect to host 10.1.1.4 port 22: Connection timed out ssh is installed on both machines, and I've tried deleting '~/.ssh/known_hosts' on both machines, still nada. I've changed the sshd logging on the laptop to VERBOSE and restarted the daemon (because I wasn't getting any relevant syslog entries otherwise), and this is the log for the most recent connection attempt. EDIT: posted wrong logs last time. They just showed that there was a connection received, they weren't actually the sshd logs (which were in auth.log as I recently discovered). Unfortunately, that log is filling up with extremely weird error messages and it gives me no information about the connection. Nov 8 16:02:18 ovangle-A6Rp pkexec: pam_unix(polkit-1:session): session opened for user root by (uid=1000) Nov 8 16:02:18 ovangle-A6Rp pkexec: pam_ck_connector(polkit-1:session): cannot determine display-device Nov 8 16:02:18 ovangle-A6Rp pkexec[6270]: ovangle: Executing command [USER=root] [TTY=unknown] [CWD=/home/ovangle] [COMMAND=/usr/sbin/gnome-power-backlight-helper --set-brightness 2] Nov 8 16:02:19 ovangle-A6Rp pkexec: pam_unix(polkit-1:session): session opened for user root by (uid=1000) Nov 8 16:02:19 ovangle-A6Rp pkexec: pam_ck_connector(polkit-1:session): cannot determine display-device Nov 8 16:02:19 ovangle-A6Rp pkexec[6273]: ovangle: Executing command [USER=root] [TTY=unknown] [CWD=/home/ovangle] [COMMAND=/usr/sbin/gnome-power-backlight-helper --set-brightness 7]

  Read the article

• Wired card not connecting after trying to connect

  - by Mike

  I have an Ubuntu 12.10 PC. When I plug in my internet cable it starts connecting and after a minute it says it can't connect. I tried different cables but nothing works. Wlan works. I think it's the network driver but I don't know how to install/update it. Here's the ifconfig info (if it helps): eth0 Link encap:Ethernet HWaddr 00:01:6c:39:2a:8d inet6 addr: fe80::201:6cff:fe39:2a8d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2011 errors:0 dropped:362 overruns:0 frame:0 TX packets:586 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:175452 (175.4 KB) TX bytes:147211 (147.2 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:9779 errors:0 dropped:0 overruns:0 frame:0 TX packets:9779 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8460080 (8.4 MB) TX bytes:8460080 (8.4 MB) wlan0 Link encap:Ethernet HWaddr 08:10:74:35:99:9d inet6 addr: fe80::a10:74ff:fe35:999d/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:1790 errors:0 dropped:0 overruns:0 frame:0 TX packets:3250 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:401664 (401.6 KB) TX bytes:2898773 (2.8 MB)

  Read the article

• Should I sell video tutorials on my own or via publishers like lynda.com? [closed]

  - by Derfder

  I am asking this because I am deciding between two models right now. One way is to create video tutorials on my own (make some short free videos and long pay per download/stream videos) or sell them to lynda.com or tutsplus. The 2nd way is easier, because they will do all the boring business stuff, will host the files to download etc. In that case, everything I need is a good microphone and obey their guidelines. On the other side if I do it on my own, I have to do all the unwanted business stuff, pay the server and other stuff. This is quite a big downside, however, I will have all the videos under my control in the future. I know that lynda.com has bigger attention and marketing that I am capable, but if you take e.g. phpvideotutrials.com (r.i.p ;), I think Leigh was very successful with relatively small budget. The interesting question will be the cost or how much will they pay me. Would it be less than if I sell it myself+monthly server hosting+other expenses? Any advice from people who actively sell their videos to some companies or do it on they own is highly appreciated.

  Read the article

• Another hibernation question

  - by GeekOfTheWeek

  I installed Ubuntu on my Windows 7 Sager laptop using Wubi. Hibernate (i.e. suspend to disc) is not an option from the power icon, only suspend, shutdown, etc. Hibernate is also not an option from my battery/lid close options. I understand that hibernation is disabled by default in Ubuntu 12.04. I tried running pm-hibernate but I get the following message: Looking for splash system... none s2disk: Snapshotting system and then the computer just hangs with a black screen. According to the documentation here if this fails then I can't enable hibernate but it offers no help in making pm-hibernate succeed. Could swap be my problem? It looks like I have very small swap: user@ubuntu:~$ cat /proc/swaps Filename Type Size Used Priority /host/ubuntu/disks/swap.disk file 262140 0 -1 The advice on SwapFaq is only for the author's set up (e.g. I don't have an Ubuntu install disk since I used Wubi) and he says that 'INFO: This will not work for 12.04, resume from hibernate work differently in 12.04.' Any advice? I really need to get hibernate working to use my laptop as a, er, laptop. Thanks

  Read the article

• VMware9 fails to launch Virtual OS. Ubuntu 12.10 64bit (Unable to change virtual machine power state: Pipe connection has been broken.)

  - by pst007x

  Another issue I need help with. I use VMware for work on Ubuntu 12.04. However for some reasons my VMware Workstation software generates the following error: Unable to change virtual machine power state: Failed to power on '/home/pst007x/vmware/Windows 7 x64/Windows 7 x64.vmx'. Transport (VMDB) error -14: Pipe connection has been broken. Product: VMware® Workstation Version: 9.0.0 build-812388 Host OS Version: 3.5.0-18-generic Ubuntu 12.10 64bit Kernel Linux 3.5.0-18-generic I have seen patches, but nothing works, and the patches are not maintained, broken links. PLEASE NOTE: I know that this has been asked, but there was no answer given that resolves this issue. Unfortunately I have changed all my office and personal PC's to Ubuntu, and use Win7 in a vm, however since 12.10, vm now fails to launch. For me this is a catastrophe, and makes Ubuntu useless for me to use! I am in a desperate situation here, is there is anyone that can offer any help I would be truly appreciative. I have looked on the VMware forums and the only solution is offered for Fedora, but the people posting there are not clear about what the solution is! thanks PLEASE DO NOT CLOSE THIS QUESTION! I have tried everywhere to find a solution, but I have come up blank... Patches referenced to in other posts do not work in this version of VMware...

  Read the article

• View the Time & Date in Chrome When Hiding Your Taskbar

  - by Asian Angel

  Do you prefer keeping your Taskbar hidden but still need to keep watch on what time it is? Now you can keep track of the time without the Taskbar using the Date Today extension for Google Chrome. A Look at Date Today with Different Themes This extension does one thing and does it well…it provides you with an “active icon” clock that will let you view the time and date in two fashions. The first is by hovering your mouse over the “Toolbar Clock Button”… And the second is by clicking on the “Toolbar Clock Button” to view an enlarged version. Here you can see the extension in use with five different themes to get an idea of how it might look with the theme that you are currently using. It does stand out very nicely with brighter or darker colored themes. Conclusion While this extension is obviously not for everyone it will make a nice (and useful) addition to Chrome for those who prefer keeping their Taskbar hidden. Links Download the Date Today extension (Google Chrome Extensions) Similar Articles Productive Geek Tips Set the Date and Time on SolarisView Browser History Based on Host & Date in ChromeQuick Tip: Set a Future Date for a Post in WordPressFuture Date a Post in Windows Live WriterSave Screen Space by Hiding the Bookmarks Toolbar in Safari for Windows TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Discovery Channel LIFE Theme (Win7) Increase the size of Taskbar Previews (Win 7) Scan your PC for nasties with Panda ActiveScan CleanMem – Memory Cleaner AceStock – The Personal Stock Monitor Add Multiple Tabs to Office Programs

  Read the article

• How to switch off? [closed]

  - by Xophmeister

  While I've programmed software for many years, I've only recently started doing so professionally and have noticed a bit of a problematic pattern. I hope this is the best place to pose such a question, as I am interested in others' experiences and solutions... Writing software is, by its nature, a cerebral exercise. When coding for my own sake, I would do so until I was satisfied; even if that meant going all night. Now I'm coding in exchange for goods and services, on projects that are inherently uninteresting to me, I want to 'switch off' when it's time to go home. Maybe you consider that to be a 'bad attitude', but I just don't feel that whatever I'm working on is worth caring about after-hours. Besides, my employer doesn't exactly have the infrastructure required to make out-of-office changes; I can't just clone a repo and even remote login is a PITA. Anyway, the problem I'm experiencing is that, while I'm not particularly overworked or stressed, if I'm faced with a problem, my brain will work on a solution. Generally, it won't give up. Hence I can't switch off and, sometimes, the problem or the solution is significant enough that it disrupts my sleep. While, paradoxically, this doesn't seem to affect my coding ability, it can have a profound impact of the rest of my life. I get increasingly low as I get tired. So far, the best solutions I've found are writing little notes on the matter (and, say, e-mailing them back to my work address) and exercise. Neither of these can switch me off entirely and, as the week progresses, exercise especially becomes untenable due to tiredness. TL;DR How can you stop from being a coding zombie?

  Read the article

• HP DV6 connects but no internet

  - by Frank Barcenas

  I have a Hewlett Packard DV6. I connected to the access point. I receive an IP address/default gateway/DNS,etc(DHCP). I cannot ping my gateway. DNS lookups fails. There is just no connectivity. My driver is listed as being IWLWIFI. An lspci shows my card to be a Realtek RTL8101E/RTL8102E. I can't ping myself from another computer. eth0 Link encap:Ethernet HWaddr c8:0a:a9:0c:a7:45 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:41 Base address:0xe000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:561 errors:0 dropped:0 overruns:0 frame:0 TX packets:561 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:42164 (42.1 KB) TX bytes:42164 (42.1 KB) wlan0 Link encap:Ethernet HWaddr 00:26:c7:04:97:c0 inet addr:192.168.1.109 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::226:c7ff:fe04:97c0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:71 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2035 (2.0 KB) TX bytes:12371 (12.3 KB)

  Read the article

• Blatant copyright theft

  - by Tom Gullen

  Found a user on the forum trying to solicit business for his website, a good user reported it and I checked the website out. Firstly and most dangerously it's attempting to sell our original software, which is open source. Our open source software is around 15mb big and he's serving a 50mb download and trying to sell it for $20. He's also stolen our CSS/images/site design in general which is all custom built. I attempted to open reasonable discussion with him, and he responded promptly saying he would remove offending materials if he could just have 3 days to sort it out which I accepted. I'm not sure what his plan was because everything on that site is offending material. Anyway he messaged back saying the site was offline, and it was, but it went back online shortly afterwards. It's pretty sickening that someone is selling open source work as their own, (the site about us page references him as the sole developer etc etc, it's unbelievable to read it). I want to shut it down, what are my options? I'm going to contact his domain registrar, web host, and Paypal (that's how he's selling the program). Any other ideas?

  Read the article

• Could crosslinking using very general anchor texts be a reason for a drop in rankings?

  - by webmasters

  I have crosslinked 20 sites and I thought I have been penalized for this, asked this question and some experienced members told me maybe that crosslinking may not necessarily be the reason. The sites are on same host, different C class IP and every site in linked to each other. Each site targets long tail kewords. Site 1 - BMW Used Cars - and my area Site 2 - WW Used Cars - and my area And so on... When I crosslinked them (in the sidebar), I did it for the users; instead of repeating the terms used cars and my location over and over (since my users are targeted) I just crosslinked them using the brand: BMW, WW. Targeting locally, my niches are not overly competitive, so I did not need to many external links to rank on various positions on the 1st page. I'm thinking that when I chose to link using only the brand, google might have thought I wanted to actually rank for BBW and WW, hence the drop in my targeted local traffic. Could this be? I now have no-followed the links and I am noticing a slight recovery, but if it's not a interlinking penalty it would be a shame not to benefit from my links.

  Read the article

• NFS users getting a laggy GUI expierence

  - by elzilrac

  I am setting up a system (ubuntu 12.04) that uses ldap, pam, and autofs to load users and their home folders from a remote server. One of the options for login is sitting down at the machine and starting a GUI session. Programs such as chormium (browser) that preform many read/write operations in the ~/.cache and ~/.config files are slowing down the GUI experience as well as putting strain of the NFS server that is causing other users to have problems. Ubuntu had the handy-dandy XDG_CONFIG_HOME and XDG_CACHE_HOME variables that can be set to change the default location of .cache and .config from the home folder to somewhere else. There are several places to set them, but most of them are not optimal. /etc/environment pros: will work across all shells cons: cannot use variables like $USER so that you can't make users have different new locations for .cache and .config. Every users' new location would be the same directory. /etc/bash.bashrc pros: $USER works, so you can place them in different folders cons: only gets run for bash compatible shells ~/.pam_environment pros: works regardless of shell cons: cannot use system variables (like $USER), has it's own syntax, and has to be created for every user

  Read the article

• GeoTools Demo Embedded in an Application Framework via Maven

  - by Geertjan

  GeoTools 8.4 was very recently released, according to its active blog, and to celebrate here's a starting point for working with GeoTools on the NetBeans Platform: The sources of the above are below, as a Maven project, so this project can be used in any IDE or command line: http://java.net/projects/nb-api-samples/sources/api-samples/show/versions/7.3/tutorials/geospatial/geotools/MyGeospatialSystem Though quite dated, the GeoTools NetBeans Quick Start is very helpful, especially since it used Maven too, but not the NetBeans Platform, unlike the above sample. From the point of view of NetBeans Platform developers, the GeoTools JMapPane class is very useful, providing the integration point between GeoTools and the rest of the NetBeans Platform application. Being integrated into the NetBeans Platform means that a host of standard features are now available to the GeoTools features, e.g., print functionality, which only requires a runtime dependency on the NetBeans Print API, together with the "print.printable" client property put into constructor of the TopComponent: By the way, I've spent some time now and again being confused about the difference between GeoTools and GeoToolkit. Here's an interesting starting point to beginning to understand the differences and history between them. Soon I'd like to have an example similar for the above for GeoToolkit.

  Read the article

• Integrating Amazon EC2 in Java via NetBeans IDE

  - by Geertjan

  Next, having looked at Amazon Associates services and Amazon S3, let's take a look at Amazon EC2, the elastic compute cloud which provides remote computing services. I started by launching an instance of Ubuntu Server 14.04 on Amazon EC2, which looks a bit like this in the on-line AWS Management Console, though I whitened out most of the details: Now that I have at least one running instance available on Amazon EC2, it makes sense to use the services that are integrated into NetBeans IDE:  I created a new application with one class, named "AmazonEC2Demo". Then I dragged the "describeInstances" service that you see above, with the mouse, into the class. Then the IDE automatically created all the other files you see below, i.e., 4 Java classes and one properties file: In the properties file, register the access ID and secret keys. These are read by the other generated Java classes. Signing and authentication are done automatically by the code that is generated, i.e., there's nothing generic you need to do and you can immediately begin working on your domain-specific code. Finally, you're now able to rewrite the code in "AmazonEC2Demo" to connect to Amazon EC2 and obtain information about your running instance: public class AmazonEC2Demo { public static void main(String[] args) { String instanceId1 = "i-something"; RestResponse result; try { result = AmazonEC2Service.describeInstances(instanceId1); System.out.println(result.getDataAsString()); } catch (IOException ex) { Logger.getLogger(AmazonEC2Demo.class.getName()).log(Level.SEVERE, null, ex); } } } From the above, you'll receive a chunk of XML with data about the running instance, it's name, status, dates, etc. In other words, you're now ready to integrate Amazon EC2 features directly into the applications you're writing, without very much work to get started. Within about 5 minutes, you're working on your business logic, rather than on the generic code that anyone needs when integrating with Amazon EC2.

  Read the article

• Android Activity access Unity Classes

  - by Anomaly

  I have made my own C# classes in Unity, is there any way I can access these classes from the Android Activity that starts the UnityPlayer? Example: I have a C# class called testClass in Unity: class testClass{ public static string myString="test string"; } From the Android activity in Java I want to access that class: string str=testClass.myString; Is this possible? If so, how? Or is there some other way to do this? In the end I basically want to communicate between my Android activity and the UnityPlayer object. Thanks in advance. EDIT: Ok so I looked at building Android plugins for Unity but this wasn't satisfactory to me. I ended up building a socket client-server interface in Unity with C# and another one in Java for the Android app: So Unity listens on port X and broadcasts on port Y The Android activity listens on port Y and broadcasts on port X This is necessary as both interfaces are running on the same host. So that's how I solved my problem, but I'm open for any suggestions if anyone knows a better way of communicating between the Unityplayer and your app.

  Read the article

• Quoted on MVA Voices

  A couple of weeks ago, I received an email from the Dean of Microsoft Virtual Academy (MVA) asking for permission to quote a statement I made during a jump start. Following is an excerpt from that request: "Dear Jochen, I would like to thank you for providing insight as to how the Advanced HTML5 Jump Start helped you improve your skills.  I mentioned this to the leadership team at MVA, and they were pleased to hear this so much that they would like your permission to use a quote from your email to me on the MVA website." Of course! I really enjoy those free MVA jump starts - live and later the recordings. Actually, I prefer the live ones because you really have a chance to communicate with the MVA studio team and the experts in the chat. Luckily, the live stream is provided in two quality levels and with the remote situation of Mauritius, I always have to switch to 'Standard Quality' to avoid too much buffering and to enjoy a smooth experience. Later on, the recordings are great for rehearsal and repetition of the material. You can download and watch them offline while commuting, or what I'm going to do in the future - to use them as material for a study group within the Mauritius Software Craftsmanship Community (MSCC). For sure, this is going to be a lot of fun, and I'm looking forward to work with other Windows-oriented software craftsmen in order to 'push' them towards Microsoft certifications. By chance, I discovered today that my quote has been published in the MVA Voices section: Click to enlarge: Screenshot of Microsoft Virtual Academy web site taken on 04.07.2013 Thank you very much, MVA - this made my day and I'm very happy to be quoted.

  Read the article

• Wired Connection Problem

  - by Dave

  After upgrading to 12.04 my interent connection no longer works. More precisely it is really, really, slow, and occasionally will connect, but do so only for a few moments and then disappear again. I am on a Lenovo Workstation e20. Output of ifconfig: eth0 Link encap:Ethernet HWaddr 70:f3:95:00:64:3e inet addr:192.168.1.20 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::72f3:95ff:fe00:643e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:7398 errors:0 dropped:74 overruns:0 frame:0 TX packets:6684 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:5407828 (5.4 MB) TX bytes:854343 (854.3 KB) Interrupt:20 Memory:fb120000-fb140000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1587 errors:0 dropped:0 overruns:0 frame:0 TX packets:1587 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:152089 (152.0 KB) TX bytes:152089 (152.0 KB) I am really at a loss for what to do. I am relatively new to Ubuntu, searched the other user questions and couldn't figure this out.

  Read the article

• Looking to create website that can have custom GUI and database per user

  - by riley3131

  I have developed an MS Access database for a company to track data in regards to production of a certain commodity. It has many many tables, forms, reports, etc. These were all done as the user requested, and resemble the users previously used system, mostly printed worksheets and excel workbooks. This has created a central location for all information and has allowed the company to compare data in a new way. I am now looking to do this for other companies, but would like to switch it to a web application. Here is my question. What is the best way to create unique solutions for individual companies that can have around 100 users each? I would love to create one site that would serve all parties, but that would ruin the customizable nature of what I am developing. I love the ability to create reports, excel sheets, pdf, graphs, etc with access, but am tired of relying on my customers software, servers, etc. I have some experience with WAMP, but I am far better at VBA. I was okay at PHP, and was getting a grasp on JavaScript a few years back. I am also trying to decide whether to go with WAMP or LAMP, if web is the best choice. Also, should I try set up one site for all users that after log-in goes to company specific pages, or individual sites for each company? Should I host or use a service?

  Read the article

• Dynamic Monitoring Service (DMS) Configuration Dumping and CPU Utilization

  - by ShawnBailey

  There was recently a report of CPU spikes on a system that were occuring at precise 3 hour intervals. Research revealed that the spikes were the result of the Dynamic Monitoring Service generating a metrics dump and writing it under the server 'logs' folder for every WLS server in the domain. This blog provides some information on what this is for and how to control it. The Dynamic Monitoring Service is a facility in FMw (JRF to be more precise) that collects runtime data on the components deployed to WebLogic. Each component is responsible for how much or how little they use the service and SOA collects a fair amount of information. To view what is collected on any running server you can use the following URL, http://host:port/dms/Spy and login with admin credentials. DMS is essentially always running and collecting this information in the runtime and to protect against loss of this data it also runs automatic backups, by default at the 3 hour interval mentioned above. Most of the management options for DMS are exposed through WLST but these settings are not so we must open the dms_config.xml file which can be found in DOMAIN_HOME/config/fmwconfig/servers/<server_name>/dms_config.xml. The contents are fairly short and at the bottom you will find the following entry: <dumpConfiguration>     <dump intervalSeconds="10800" maxSizeMBytes="75" enabled="true"/> </dumpConfiguration> The interval of 10800 seconds corresponds to the 3 hours and the maximum size is 75MB. The file is written as an archive to DOMAIN_HOME/servers/<server_name>/logs/metrics. This archive contains the dump in XML format. You can disable the dumps all together by simply setting the 'enabled' value to 'false' or of course you could modify the other parameters to suit your needs. Disabling the dumps will NOT impact DMS collections or display at runtime. It will only eliminate these periodic backups.

  Read the article

• Web Hosting Checklist

  - by Chris

  I am a web developer that is starting to look into hosting his own website. I would like to showcase my programming skills (PHP, MySQl, C#, Wordpress). My knowledge of languages I am OK with but the actually hosting site is where my knowledge starts to get a little shaky. I know the basics (bandwidth, sub-domains, re-write rules) but I would love your input, to help me formulate a check list of certain web-hosting services that I should be on the look-out for. Also I was wondering if there were any reliable hosting providers who give you the option to host both c# code-behinds and PHP code. As I would like to have two versions of my site, one in C# and one in PHP the hope is that if I need to look for another job this website will help me show possible employers my server side knowledge. I hope this is enough info, I did some researching online but found a bunch of unless articles and I've always have had luck on the StackExchange sites. So hopefully you, can help me. Thanks alot.

  Read the article

• Scripted SOA Diagnostic Dumps for PS6 (11.1.1.7)

  - by ShawnBailey

  When you upgrade to SOA Suite PS6 (11.1.1.7) you acquire a new set of Diagnostic Dumps in addition to what was available in PS5. With more than a dozen to choose from and not wanting to run them one at a time, this blog post provides a sample script to collect them all quickly and hopefully easily. There are several ways that this collection could be scripted and this is just one example. What is Included: wlst.properties: Ant Properties build.xml soa_diagnostic_script.py: Python Script What is Collected: 5 contextual thread dumps at 5 second intervals Diagnostic log entries from the server WLS Image which includes the domain configuration and WLS runtime data Most of the SOA Diagnostic Dumps including those for BPEL runtime, Adapters and composite information from MDS Instructions: Download the package and extract it to a location of your choosing Update the properties file 'wlst.properties' to match your environment Run 'ant' (must be on the path) Collect the zip package containing the files (by default it will be in the script.output location) Properties Reference: oracle_common.common.bin: Location of oracle_common/common/bin script.home: Location where you extracted the script and supporting files script.output: Location where you want the collections written username: User name for server connection pwd: Password to connect to the server url: T3 URL for server connection, '<host>:<port>' dump_interval: Interval in seconds between thread dumps log_interval: Duration in minutes that you want to go back for diagnostic log information Script Package

  Read the article

• Create subdomains via C-Panel or via domain registrar?

  - by cybergeek654

  I am a novice, so excuse me if it sounds dummy. I read a few similar questions on this topic here but they did not answer my question. I have a personal website, hosted with C-panel control panel. Via C-panel I can easily create new subdomains and I do not need to apply any DNS settings or so. And the subdomian is good to go immediately and are working fine. I have unlimited subdomains option. When I check my DNS management control panel in my domain registrar's site, there is no record associated with my subdomains. Now I want to buy a new domain name from 1and1, and have it as an add-on domain in my prevouse host. 1and1 say they only allow 5 subdomains. What does this mean? Can not I create unlimited subdomains under my new domain name, just as I do for my old domain? How does C-panel create and manage subdomains that there is nothing about it in my DNS control panel? Thanks for your help

  Read the article

• Good podcasting solution?

  - by burnso

  I simply ask for the best, most common and simple way to set up a podcast? Please, I need an answer so I can close this question? I run a joomla-based website for a small church and now need a simple, cheap and effective solution for an audio podcast. I am looking for a solution that will do the following: User uploads audio files to service (preferably not to our own site) that is cheap, fast and simple to use. Dropbox for example? Files are easily embeddable into Joomla website articles to be played on the spot (through simple-to-use and media player). Preferably through RSS feeds (to make it easy to update every week). Files are downloadable. Files are viewable on iPhones and other smartphones. Solution can be broadcasted via iTunes. Solution doesn't need a lot of extra, new third party software. I'd rather keep it simple and familiar than have it be a complete new system but with a steep learning curve. At the moment we use vimeo to host the podcast, through video files. But we'd like to move to something simpler that doesn't involve a series of difficult steps to upload the files to the web.

  Read the article

• Kubuntu not showing eth0

  - by Laurbert515

  I just installed Kubuntu 12.04.2 and do not have an internet connection. I also cannot access the Desktop and only have the terminal. When I enter xlcock I get Error: Can't open display:. I believe this is because I do not have the correct drivers and need to download them ... using the internet which I can't access. So here's what's going on ... ifconfig gives: lo Link ecap: Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:16 errors:0 dropped:0 overrruns:0 frame:0 TX packets:16 errors:0 dropped:0 overrruns:0 frame:0 collisions:0 txqueuelen:0 RX bytes:1296 (1.2 KB) TX bytes:1296 (1.2 KB) wlan0 Link encap: Ethernet HWaddr 68:17:29:58:49:4a UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:16 errors:0 dropped:0 overrruns:0 frame:0 TX packets:16 errors:0 dropped:0 overrruns:0 frame:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lspci -nnk gives: 07:00.0 Network Controller [0280] Intel Corporation Centrino Wireless-N 2230 [8086:0887] (rev c4) Subsystem: Intel Coporation Centrino Wireless-N 2230 BGN [8086:4062] Kernel driver in use: iwlwifi Kernel modules: iwlwifi 0d:00.0 Ethernet Controller [0200]: Atheros Communications Inc. AR8161 Gigabit Ethernet [1969:1091] (rev 10) Subsystem: Toshiba America Info Systems Device [1179:fa77] I believe this means that it is using the ethernet connection but thinks it is a wireless connection. sudo lshw -class network gives: *-network description: Wireless interface product: Centrino Wireless=N 2230 ... *network UNCLAIMED description: Ethernet controller product: AR8161 Gigabit Ethernet I want to get the internet working so I can fix the GPU driver, etc. but I can't seem to get it working even though I have my ethernet cable plugged in (and I'm sure it is working).

  Read the article

< Previous Page | 559 560 561 562 563 564 565 566 567 568 569 570  | Next Page >